Simple power supply for power load controlled isoelectric focusing

Qualitative and quantitative aspects of time-, charge-, and mobility-based electropherograms

The migration process in capillary electrophoresis is obtained by using a high-voltage power supply, and the basic idea is to keep the control on the migration velocity of the analytes by controlling either the applied voltage or current. The effectiveness of this control has impact on the resulting electropherogram and, thus, in the identification and quantification of the analytes. Although the usual electropherogram is the record of the detector signal as a function of time, other two domains should be considered: charge and mobility. Both mathematical modeling and experimental results were used to evaluate the two different approaches for controlling the electrophoretic migration and the resulting time-, charge-, and mobility-based electropherograms. The main conclusions are (1) the current-controlled mode is superior to the voltage-controlled mode; (2) when the first mode cannot be implemented, the electrophoretic current should be monitored to improve the identification and quantification procedures; and (3) the consistent monitoring of the electrophoretic current allows the implementation of the charge-based electropherogram and the mobility spectrum. The first one is advantageous because the peak position is more reproducible, and the peak area is more resistant to change than the ones from the time-based electropherogram. The mobility spectrum has the additional advantage of being more informative about the mobility of the analytes. Although peak area is less robust, the spectrum may also be used for quantitation when the number of plates is greater than 10³ .

Utilization of Red Nonionogenic Tenside Labeling, Isoelectric Focusing, and Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry in the Identification of Uropathogens in the Presence of a High Level of Albumin

Cellulose-based preparative isoelectric focusing was used for preseparation and concentration of uropathogens Staphylococcus aureus, Escherichia coli, Enterococcus faecalis, Staphylococcus epidermidis, Candida albicans, and Candida parapsilosis in a urine sample containing a high concentration of human serum albumin. For the visibility of the colorless microbial zones in the separation medium, the microbial cells were labeled with red nonionogenic tenside (1-[[4-(phenylazo)phenyl]azo]-2-hydroxy-3-naphthoic acid polyethylene glycol ester, PAPAN). A very short incubation time, about 2 min, was sufficient for the adsorption of 0.001% (w/v) PAPAN onto the cell surface at the optimized conditions. As low as 10³ cells of E. coli (pI 4.6) resuspended in 100 μL of urine sample and spiked with 0.1 mg mL^-1 of human serum albumin (pI 4.8) were successfully preseparated and concentrated using this method. Because the pI values of the labeled microorganisms remained unchanged, the focused red zones of microbial cells were collected from the separation media and further analyzed by either capillary isoelectric focusing or matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The viability of the cells extracted from the collected zones was also confirmed. The proposed method provides reliable, relatively fast, and cost-effective identification of uropathogens in urine specimens with a high level of albumin.

Preparative and capillary isoelectric focusing for detection and identification of Aspergillus conidia in complex sample matrices

This study describes a new method for fast identification of highly hydrophobic conidia of Aspergillus species from both simple and complex matrices. The method is based on recently developed preparative isoelectric focusing in a cellulose-based separation medium which had to be modified with respect to the highly hydrophobic surface of the conidia. Although Aspergillus conidia are colored, their zones in the cellulose bed were indicated by colored isoelectric point markers. The isoelectric point values of Aspergillus conidia were determined by capillary isoelectric focusing. Preparative isoelectric focusing was successfully used for preconcentration of individual conidia of cultivated strains of Aspergillus niger, Aspergillus fumigatus, Aspergillus flavus, and Aspergillus parasiticus, and also for separation of the conidia in a mixture. Subsequently, red pepper powder and peanuts spiked with Aspergillus niger and Aspergillus flavus conidia, respectively, were used as complex matrices. The detection limit for identification of the conidia in these complex matrices is 10⁴ conidia mL^-1 . The presence of conidia in the focused zones was confirmed by their subsequent analysis by capillary isoelectric focusing. Their viability was confirmed by a cultivation of the conidia extracted from the collected fractions after preparative isoelectric focusing.

Preparative isoelectric focusing in a cellulose-based separation medium

An improved preparative method based on isoelectric focusing of analytes in a cellulose-based separation medium is described in this study. Cellulose is suspended in an aqueous solution of simple buffers, ethylene glycol, glycerol, nonionic surfactant, and colored pI markers. Water partially evaporates during focusing run and the separation takes place in an in situ generated layer of cellulose, which has a gel-like appearance at the end of analysis. Final positions of analytes are indicated by the positions of zones of focused pI markers. Fractions, segments of the separation medium with analytes, can be simply collected by spatula and analyzed by downstream analytical methods. Good focusing ability of the new method and almost quantitative recovery of model proteins, cytochrome c and bovine serum albumin, was verified by gel electrophoresis and capillary isoelectric focusing of the collected fractions.