Anti-plasticizing effect of amorphous indomethacin induced by specific intermolecular interactions with PVA copolymer

Interpenetrating Polymer Networks of Poly(2-hydroxyethyl methacrylate) and Poly(N, N-dimethylacrylamide) as Potential Systems for Dermal Delivery of Dexamethasone Phosphate

In this study, a series of novel poly(2-hydroxyethyl methacrylate) (PHEMA)/poly(N,N'-dimethylacrylamide) (PDMAM) interpenetrating polymer networks (IPNs) were synthesized and studied as potential drug delivery systems of dexamethasone sodium phosphate (DXP) for dermal application. The IPN composition allows for control over its swelling ability as the incorporation of the highly hydrophilic PDMAM increases more than twice the IPN swelling ratio as compared to the PHEMA single networks, namely from ~0.5 to ~1.1. The increased swelling ratio of the IPNs results in an increased entrapment efficiency up to ~30% as well as an increased drug loading capacity of DXP up to 4.5%. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) show the formation of a solid dispersion between the drug DXP and the polymer (IPNs) matrix. Energy-dispersive X-ray (EDX) spectroscopy shows an even distribution of DXP within the IPN structure. The DXP release follows Fickian diffusion with ~70% of DXP released in 24 h. This study demonstrates the potential of the newly developed IPNs for the dermal delivery of DXP.

Influence of formulation variables on the processability and properties of tablets manufactured by fused deposition modelling

The present work studied the influence of different formulation variables (defined also as factors), namely, different polymers (HPC EF, PVA and HPMC-AS LG), drugs with different water solubilities (paracetamol, hydrochlorothiazide and celecoxib) and drug loads (10 or 30 %) on their processability by HME and FDM. Both filaments and tablets were characterized for physic and chemical properties (DSC, XRPD, FTIR) and performance properties (drug content, in vitro drug release). Experiments were designed to highlight relationships between the 3 factors selected and the mechanical properties of filaments, tablet mass and dissolution profiles of the model drugs from printed tablets. While the combination of hydrochlorothiazide and HPMC-AS LG could not be extruded, the combination of paracetamol with HPC EF turned the filaments too ductile and not stiff enough hampering the process of printing. All other polymer and drug combinations could be successfully extruded and printed. Models reflected the influence of the solubility of the drug considered but not the drug load in formulations. The ranking of the drug release rates was in good agreement with their solubilities. Furthermore, PVA presenting the fastest swelling rate, promoted the fastest drugs' releases in comparison with the other polymers studied. Overall, the study enabled the identification of the key factors affecting the properties of printed tablets, with the proposal of a model that has valued the relative contribution of each factor to the overall performance of tablets.

Co-amorphous systems consisting of indomethacin and the chiral co-former tryptophan: Solid-state properties and molecular mobilities

In this study the influence of an enantiomeric co-former and the preparation method on the solid-state properties and physical stability of co-amorphous systems were investigated. Co-amorphous systems consisting of indomethacin (IND) and chiral tryptophan (TRP) as co-former in its two enantiomeric forms, as racemate, and as conglomerate (equimolar mixture of D- and L-TRP) were prepared. Co-amorphization was achieved by ball milling (BM) and spray drying (SD). The effects of chirality and preparation method on the solid-state properties and physical stabilities of the systems were investigated by XRPD, FTIR and mDSC. Differences in the BM process were caused by the enantiomeric properties of the co-former: The IND/TRP conglomerate (IND/TRPc) turned co-amorphous after 60 min. In contrast, co-amorphization of IND/L-TRP and IND/D-TRP required 80 min of ball milling, respectively, and the co-amorphous IND/TRP racemate (IND/TRPr) was obtained only after 90 min of ball milling. Although the intermolecular interactions of the co-amorphous systems prepared by BM and SD were similar (determined by FTIR), the T_g values differed (∼87 °C for the ball milled and ∼62 °C for the spray dried systems). The physical stabilities of the ball milled co-amorphous systems varied between 3 and 11 months if stored at elevated temperature and dry conditions, with the highest stability for the IND/TRPc system and the lowest stability for the IND/TRPr system, and these differences correlated with the calculated relaxation times. In contrast, all spray dried systems were stable only for 1 month and their relaxation times were similar. It could be shown that the chirality of a co-former and the preparation method influence the solid-state properties, thermal properties and physical stability of IND/TRP systems.

Formation of a Stable Co-Amorphous System for a Brick Dust Molecule by Utilizing Sodium Taurocholate with High Glass Transition Temperature

Brick dust molecules are usually poorly soluble in water and lipoidal components, making it difficult to formulate them in dosage forms that provide efficient pharmacological effects. A co-amorphous system is an effective strategy to resolve these issues. However, their glass transition temperatures (Tg) are relatively lower than those of polymeric amorphous solid dispersions, suggesting the instability of the co-amorphous system. This study aimed to formulate a stable co-amorphous system for brick dust molecules by utilizing sodium taurocholate (NaTC) with a higher Tg. A novel neuropeptide Y5 receptor antagonist (AntiY5R) and NaTC with Tg of 155 °C were used as the brick dust model and coformer, respectively. Ball milling formed a co-amorphous system for AntiY5R and NaTC (AntiY5R-NaTC) at various molar ratios. Deviation from the theoretical Tg value and peak shifts in Fourier-transform infrared spectroscopy indicated intermolecular interactions between AntiY5R and NaTC. AntiY5R-NaTC at equal molar ratios resulting in an 8.5-fold increase in AntiY5R solubility over its crystalline form. The co-amorphous system remained amorphous for 1 month at 25 °C and 40 °C. These results suggest that the co-amorphous system formed by utilizing NaTC as a coformer could stably maintain the amorphous state and enhance the solubility of brick dust molecules.

Combining drug salt formation with amorphous solid dispersions - a double edged sword

Glass transition temperature (T_g) is important for amorphous compounds because it can have implications on their physical and chemical stability. With drugs that possess ionizable acidic or basic groups, salt formation is a potential strategy to reduce re-crystallization tendency through T_g elevation. While salt formation has been reported to impact re-crystallization tendency, it is not known if this holds true for all drugs and if it is useful in the context of amorphous solid dispersion (ASD) formulations. In addition, little information on the impact of salt formation on drug release performance of ASD is available. Herein, the influence of salt formation and T_g elevation on the release performance of lumefantrine (T_g = 19.7 °C) when formulated as an ASD with copovidone (PVPVA) was examined. Lumefantrine salts and lumefantrine salt-PVPVA ASDs with drug loadings (DLs) ranging from 5 to 30% were prepared. The acids used for salt formation were benzoic acid, benzenesulfonic acid, camphorsulfonic acid, hydrochloric acid, p-toluenesulfonic acid, poly(ethylene) glycol 250 diacid (PEG 250 diacid), and sulfuric acid. Salt formation resulted in an elevation of T_g compared to lumefantrine free base, with the largest increase in T_g observed with lumefantrine sulfate. With a lower T_g salt, ASDs could be formulated at higher DLs while ensuring drug release. In contrast, drug release ceased at a DL as low as 5% when T_g of the salt was high. However, ASDs with lower T_gs such as the benzoate and PEG 250 diacid salts showed poor stability against re-crystallization when stored under stress storage conditions. When using a salt in an ASD formulation, attention should be paid to the T_g of the salt, since it may show opposing effects on physical stability and drug release, at least for PVPVA-based ASDs.

Co-amorphous Systems of Sinomenine with Platensimycin or Sulfasalazine: Physical Stability and Excipient-Adjusted Release Behavior

There is strong interest to develop affordable treatments for the infection-associated rheumatoid arthritis (RA). Here, we present a drug-drug co-amorphous strategy against RA and the associated bacterial infection by the preparation and characterization of two co-amorphous systems of sinomenine (SIN) with platensimycin (PTM) or sulfasalazine (SULF), two potent antibiotics. Both of them were comprehensively characterized using powder X-ray diffraction, temperature-modulated differential scanning calorimetry, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The co-amorphous forms of SIN-PTM and SIN-SULF exhibited high T_gs at 139.10 ± 1.0 and 153.3 ± 0.2 °C, respectively. After 6 months of accelerated tests and 1 month of drug-excipient compatibility experiments, two co-amorphous systems displayed satisfactory physical stability. The formation of salt and strong intermolecular interactions between SIN and PTM or SULF, as well as the decreased molecular mobility in co-amorphous systems, may be the intrinsic mechanisms underlying the excellent physical stability of both co-amorphous systems. In dissolution tests, two co-amorphous systems displayed distinct reduced SIN-accumulative releases (below 20% after 6 h of release experiments), which may lead to its poor therapeutic effect. Hence, we demonstrated a controlled release strategy for SIN by the addition of a small percentage of polymers and a small-molecule surfactant to these two co-amorphous samples as convenient drug excipients, which may also be used to improve the unsatisfactory dissolution behaviors of the previously reported SIN co-amorphous systems. Several hydrogen bonding interactions between SIN and PTM or SULF could be identified in NMR experiments in DMSO-d₆, which may be underlying reasons of decreased dissolution behaviors of both co-amorphous forms. These drug-drug co-amorphous systems could be a potential strategy for the treatment of infection-associated RA.

API solubility in semi-crystalline polymer: Kinetic and thermodynamic phase behavior of PVA-based solid dispersions

The formulation of amorphous solid dispersions (ASDs) represents a promising strategy for improving the poor bioavailability of many active pharmaceutical ingredients (APIs). The objective of this study was to investigate and compare the long-term physical stability (LTPS) of polyvinyl alcohol (PVA)-based solid dispersions formulated via hot-melt extrusion (HME) with their respective API-PVA temperature-composition (T-C) phase diagram. Furthermore, the impact of API glass-forming ability (GFA) on the LTPS was evaluated through the selection of two APIs with contrasting GFA (i.e., indomethacin (IND; good GFA) and naproxen (NAP; poor GFA)). Even though the predicted solubility of both APIs in PVA was less than 1 wt% at T = 25 °C, IND remained fully amorphous in HME-formulated IND-PVA extrudates with initial API loadings of 50, 40, and 30 wt% after a 24-month storage period. Meanwhile, NAP recrystallized to a considerable degree in each analogous sample with an amorphous NAP content of 22.5-23.5 wt% remaining after a 12-month storage period. While the constructed T-C phase diagrams were still in agreement with their respective LTPS study, they did not account for the impact of water uptake as well as potential HME-induced effects on the extrudate glass-transition temperature. This work may serve as a useful reference point for researchers who are interested in determining the solubility of an API in a semi-crystalline polymer and the challenges therein.

Macrophage-targeted mannose-decorated PLGA-vegetable oil hybrid nanoparticles loaded with anti-inflammatory agents

This work pledge to extend the therapeutic windows of hybrid nanoparticulate systems by engineering mannose-decorated hybrid nanoparticles based on poly lactic-co-glycolic acid (PLGA) and vegetable oil for efficient delivery of two lipophilic anti-inflammatory therapeutics (Celecoxib-CL and Indomethacin-IMC) to macrophages. The mannose surface modification of nanoparticles is achieved via O-palmitoyl-mannose spacer during the emulsification and nanoparticles assembly process. The impact of targeting motif on the hydrodynamic features (R_H, PdI), stability (ζ-potential), drug encapsulation efficiency (DEE) is thoroughly investigated. Besides, the in vitro biocompatibility (MTT, LDH) and susceptibility of mannose-decorated formulations to macrophage as well their immunomodulatory activity (ELISA) are also evaluated. The monomodal distributed mannose-decorated nanoparticles are in the range of nanometric size (R_H < 115 nm) with PdI < 0.20 and good encapsulation efficiency (DEE = 46.15% for CL and 76.20% for IMC). The quantitative investigation of macrophage uptake shows a 2-fold increase in fluorescence (RFU) of cells treated with mannose-decorated formulations as compared to non-decorated ones (p < 0.001) suggesting an enhanced cell uptake respectively improved macrophage targeting while the results of ELISA experiments suggest the potential immunomodulatory properties of the designed mannose-decorated hybrid formulations.

A New Strategy for Real-Time Humidity Detection: Polymer-Coated Optical Waveguide Sensor

This paper proposes a novel strategy for low humidity detection, an optical waveguide (OWG) sensor that is locally coated with polyvinylpyrrolidone (PVP) film. The humidity sensor was fabricated using a spin coating on a K+-exchanged glass optical waveguide with PVP film. Its sensing properties were investigated by injecting a humid air range of 10.6~32%RH (relative humidity) at room temperature. The topography of PVP film was characterized by an atomic force microscope (AFM). The possible humidity sensing mechanism of the proposed sensor was discussed by using absorption spectra. This study showed that the PVP-coated OWG sensor possessed high sensitivity, stability, and rapid response/recovery. Therefore, these observed results demonstrate that the low-cost OWG humidity sensor could be applied in real-time low concentration water vapor monitoring.

Local Treatment of Non-small Cell Lung Cancer with a Spray-Dried Bevacizumab Formulation

Local delivery of biotherapeutics to the lung holds great promise for treatment of lung diseases, but development of physically stable, biologically active dry powder formulations of large molecules for inhalation has remained a challenge. Here, spray drying was used to manufacture a dry powder pulmonary formulation of bevacizumab, a monoclonal antibody approved to treat non-small cell lung cancer (NSCLC) by intravenous infusion. By reformulating bevacizumab for local delivery, reduced side effects, lower doses, and improved patient compliance are possible. The formulation had aerosol properties suitable for delivery to the deep lung, as well as good physical stability at ambient temperature for at least 6 months. Bevacizumab’s anti-VEGF bioactivity was not impacted by the manufacturing process. The formulation was efficacious in an in vivo rat model for NSCLC at a 10-fold decrease in dose relative to the intravenous control.

Effects of compaction and storage conditions on stability of intravenous immunoglobulin - Implication on developing oral tablets of biologics

Biological products, such as therapeutic proteins, vaccines and cell - based therapeutics have a rapidly growing global market. Monoclonal antibody represents a major portion of the biologics market. For biologics that target gastrointestinal tract, the oral delivery route offers many advantages, such as better patient compliance, easy administration and increased stability, over the parental route of administration. To lay the ground work for the oral delivery of biologics, we studied the solid state properties and effects of compaction pressure, particle size, and storage relative humidity on the stability of immunoglobulin G (IVIG). We employed complementary analytical and biophysical techniques, such as size exclusion chromatography and Dynamic light scattering to characterize the aggregates, circular dichroism and solid state Fourier-transform infrared spectroscopy to evaluate protein secondary structure and nano-DSC to probe thermal stability of protein conformations. Our results showed storage relative humidity could induce conformational changes and aggregation of IVIG. However, the IVIG binding activity did not significantly change with relative humidity. The commonly used compaction pressures did not promote protein aggregation, but noticeably reduced binding activity.

Stability and Influence of Storage Conditions on Nanofibrous Film Containing Tooth Whitening Agent

Carbamide peroxide (CP), a tooth whitening agent, is chemically unstable. The present study explores stability enhancement of CP by loading in a nanofibrous film (CP-F) composed of polyvinyl alcohol/polyvinylpyrrolidone/silica mixture, using an electrospinning technique. Kept at a temperature range of 60–80 °C for 6 h, CP in CP-F showed significantly higher stability than that in a polymer solution and in water, respectively. Degradation of CP in CP-F could be described by the first order kinetics with the predicted half-life by the Arrhenius equation of approximately 6.52 years. Physicochemical properties of CP-F after long-term storage for 12 months at different temperatures and relative humidity (RH) were investigated using scanning electron microscopy, X-ray diffractometry, differential scanning calorimetry, and Fourier transform infrared spectroscopy. It was found that high temperature and high humidity (45 °C/75% RH) could enhance water absorption and destruction of the nanofibrous structure of CP-F. Interestingly, kept at 25 °C/30% RH, the nanofibrous structure of CP-F was not damaged, and exhibited no water absorption. Moreover, the remaining CP, the mechanical properties, and the adhesive properties of CP-F were not significantly changed in this storage condition. It is concluded that the developed CP-F and a suitable storage condition can significantly improve CP stability.

Applicability of an Experimental Grade of Hydroxypropyl Methylcellulose Acetate Succinate as a Carrier for Formation of Solid Dispersion with Indomethacin

The transformation of a crystalline drug into an amorphous form is a promising way to enhance the oral bioavailability of poorly water-soluble drugs. Blending of a carrier, such as a hydrophilic polymer, with an amorphous drug is a widely used method to produce a solid dispersion and inhibit crystallization. This study investigates an experimental grade of hydroxypropyl methylcellulose acetate succinate, HPMCAS-MX (MX), as a solid dispersion carrier. Enhancement of thermal stability and reduction of the glass transition temperature (Tg) of MX compared with those of the conventional grade were evaluated through thermogravimetric analysis and differential scanning calorimetry (DSC). The formation of a homogeneous amorphous solid dispersion between MX and indomethacin was confirmed by X-ray powder diffraction analysis, DSC, and Raman mapping. It was observed that 10–30% MX did not act as an anti-plasticizer, but the utilization of >40% MX caused an increase in Tg and reduction of molecular mobility. This could be explained by a change in intermolecular interactions, inferred from infrared spectroscopy combined with principal component analysis. HPMCAS-MX exhibited similar performance to that of conventional-grade, HPMCAS-MG. Although HPMCAS-MX has thermal properties different from those of conventional-grade HPMCAS-MG, it retains its ability as a solid dispersion carrier.

A Multivariate Approach for the Determination of the Optimal Mixing Ratio of the Non-Strong Interacting Co-Amorphous System Carvedilol-Tryptophan

Converting crystalline compounds into co-amorphous systems is an effective way to improve the solubility of poorly water-soluble drugs. It is, however, of critical importance for the physical stability of co-amorphous systems to find the optimal mixing ratio of the drug with the co-former. In this study, a novel approach for this challenge is presented, exemplified with the co-amorphous system carvedilol–tryptophan (CAR–TRP). Following X-ray powder diffraction (XRPD) and differential scanning calorimetry (DSC) of the ball-milled samples to confirm their amorphous form, Fourier-transform infrared spectroscopy (FTIR) and principal component analysis (PCA) were applied to investigate intermolecular interactions. A clear deviation from a purely additive spectrum of CAR and TRP was visualized in the PCA score plot, with a maximum at around 30% drug (mol/mol). This deviation was attributed to hydrogen bonds of CAR with TRP ether groups. The sample containing 30% drug (mol/mol) was also the most stable sample during a stability test. Using the combination of FTIR with PCA is an effective approach to investigate the optimal mixing ratio of non-strong interacting co-amorphous systems.

Investigation into Intermolecular Interactions and Phase Behavior of Binary and Ternary Amorphous Solid Dispersions of Ketoconazole

Conventionally, amorphous solid dispersions (ASDs) have been formulated as a binary matrix, but in recent years a new class of ASDs has emerged, where generally a second polymer is also added to the formulation. Having the presence of a second polymer necessitates a comprehensive solid-state characterization to study the intermolecular interactions and phase behavior on a molecular level. With this goal in mind, ketoconazole (KET) was selected as a model drug, and hydroxypropyl methyl cellulose (HPMC) and poly(acrylic acid) (PAA) were chosen as polymeric carriers. The binary and ternary ASDs were characterized by differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, solid-state nuclear magnetic resonance (SSNMR) spectroscopy, and powder X-ray diffraction (PXRD). The binary KET:HPMC dispersions lacked any specific interactions, whereas binary KET:PAA dispersions and ternary KET:PAA:HPMC dispersions showed evidence for ionic and hydrogen bonding interactions. The ¹³C SSNMR deconvolution study established a comparison for molecular interactions between the binary KET:PAA and ternary KET:PAA:HPMC dispersions, with the binary KET:PAA system showing higher prevalence of ionic and hydrogen bonds than the ternary KET:PAA:HPMC system. Moreover, individual binary and ternary ASDs were found to be homogeneous on a nanometric level, implying the presence of a second polymer did not impact the phase homogeneity. In addition, a stronger interaction in binary KET:PAA and ternary KET:HPMC:PAA systems translated to better physical stability at different storage conditions. Through this case study it is recommended that a comprehensive investigation is needed to study the impact of using two polymers in ASD formulations in terms underlying intermolecular interactions and physical stability.

Evaluation of the Solid Dispersion System Engineered from Mesoporous Silica and Polymers for the Poorly Water Soluble Drug Indomethacin: In Vitro and In Vivo

This work explored absorption efficacy via an in vivo imaging system and parallel artificial membrane penetration in indomethacin (IMC) solid dispersion (SD) systems. Two different polymer excipients—hydroxypropyl methylcellulose (HPMC) and Kollicoat IR as precipitation inhibitors (PIs)—combined with mesoporous silica nanoparticles (MSNs) as carriers were investigated. The IMC–SDs were prepared using the solvent evaporation method and characterized by solubility analysis, infrared (IR) spectroscopy, powder X-ray diffraction (PXRD), field emission scanning electron microscopy (FESEM), and differential scanning calorimetry (DSC). It was confirmed that IMC successfully changed into an amorphous state after loading into the designed carriers. The in vitro release and stability experiments were conducted to examine the in vitro dissolution rates of IMC–SDs combined with HPMC and Kollicoat IR as PIs which both improved approximately three-fold to that of the pure drug. Finally, in vivo studies and in vitro parallel artificial membrane penetration (PAMPA) experiments ensured the greater ability of enhancing the dissolution rates of pure IMC in the gastrointestinal tract by oral delivery. In brief, this study highlights the prominent role of HPMC and Kollicoat IR as PIs in MSN SD systems in improving the bioavailability and gastrointestinal oral absorption efficiency of indomethacin.

Sericin Inhibits Devitrification of Amorphous Drugs

The purpose of the present investigation was to analyze devitrification of amorphous drugs such as lornoxicam, meloxicam, and felodipine in the presence of sericin. The binary solid dispersions comprising varying mass ratios of drug and sericin were subject to amorphization by spray drying, solvent evaporation, ball milling, and physical mixing. Further, obtained solid dispersions (SDs) were characterized by HPLC, ATR-FTIR, H¹NMR, molecular docking, accelerated stability study at 40°C and 75 ± 2% RH (XRD and DSC), and in vitro dissolution studies. The HPLC analysis indicated no decomposition of the drugs during the spray drying process. From ATR-FTIR, NMR, and molecular docking study, it was revealed that H-bonding played a vital role in amorphous drug stabilization. An excellent devitrification inhibition was observed in case of lornoxicam (SDLS3) and meloxicam (SDMS3) SDs prepared by spray drying. On the other hand, spray-dried SD of felodipine (SDFS3) showed traces of microcrystals. The percent crystallinity of SDLS3, SDMS3, and SDFS3 was found to be 7.4%, 8.23%, and 18.31% respectively indicating adequate amorphization. The dissolution performance of SDLS, SDMS, and SDFS after 3 months showed > 85% than SDs prepared by other methods. Thus, sericin significantly inhibited crystallization and was responsible for amorphous state stabilization of pharmaceuticals.

Novel PEG-Modified Hybrid PLGA-Vegetable Oils Nanostructured Carriers for Improving Performances of Indomethacin Delivery

The purpose of this work was to more exhaustively study the influence of nanocarrier matrix composition and also the polyethylene glycol (PEG)-modified surface on the performances of formulations as lipophilic drug delivery systems. Poly (d,l-lactide-co-glycolide), two vegetable oils (Nigella sativa oil and Echium oil) and indomethacin were employed to prepare novel PEG-coated nanocarriers through emulsion solvent evaporation method. The surface modification was achieved by physical PEG adsorption (in the post-production step). Transmission electron microscopy (TEM) nanographs highlighted the core-shell structure of hybrid formulations while scanning electron microscopy (SEM) images showed no obvious morphological changes after PEG adsorption. Drug loading (DL) and entrapment efficiency (EE) varied from 4.6% to 16.4% and 28.7% to 61.4%, solely depending on the type of polymeric matrix. The oil dispersion within hybrid matrix determined a more amorphous structure, as was emphasized by differential scanning calorimetry (DSC) investigations. The release studies highlighted the oil effect upon the ability of nanocarrier to discharge in a more sustained manner the encapsulated drug. Among the kinetic models employed, the Weibull and Korsmeyer-Peppas models showed the better fit (R² = 0.999 and 0.981) with n < 0.43 indicating a Fickian type release pattern. According to cytotoxic assessment the PEG presence on the surface increased the cellular viability with ~1.5 times as compared to uncoated formulations.

Physical Stability of Amorphous Solid Dispersions: a Physicochemical Perspective with Thermodynamic, Kinetic and Environmental Aspects

PURPOSE

Amorphous solid dispersions (ASDs) have been widely used in the pharmaceutical industry for solubility enhancementof poorly water-soluble drugs. The physical stability, however, remainsone of the most challenging issues for the formulation development.Many factors can affect the physical stability via different mechanisms, and therefore an in-depth understanding on these factors isrequired.

METHODS

In this review, we intend to summarize the physical stability of ASDsfrom a physicochemical perspective whereby factors that can influence the physical stability areclassified into thermodynamic, kinetic and environmental aspects.

RESULTS

The drug-polymer miscibility and solubility are consideredas the main thermodynamicfactors which may determine the spontaneity of the occurrence of the physical instabilityof ASDs. Glass-transition temperature,molecular mobility, manufacturing process,physical stabilityof amorphous drugs, and drug-polymerinteractionsareconsideredas the kinetic factors which areassociated with the kinetic stability of ASDs on aging. Storage conditions including temperature and humidity could significantly affect the thermodynamicand kineticstabilityof ASDs.

CONCLUSION

When designing amorphous solid dispersions, it isrecommended that these thermodynamic, kinetic and environmental aspects should be completely investigatedand compared to establish rationale formulations for amorphous solid dispersions with high physical stability.

Development of Polyethylene Glycol and Hard Fat-Based Mucoadhesive Tablets Containing Various Types of Polyvinyl Alcohols as Mucoadhesive Polymers for Buccal Application

Topical drug application has the advantage of avoiding systemic side effects. We attempted to develop a long-acting matrix-type tablet containing indomethacin (IM) with low physical stimulus and potent mucoadhesive force to treat pain caused by oral aphtha. A mixture of polyethylene glycol (PEG) and hard fat was used as the tablet base. Ethylcellulose was added to the base in an attempt to control drug release. Tablets with PEG as a base were also prepared for comparison. Polyvinyl alcohols (PVAs) with various degrees of saponification were added to increase the mucoadhesive force. From the optical microscopic observations, formulations using PEG and hard fat exhibit PEG/hard fat dispersions caused by the stabilizing effects of PVA. Although the tablets using PEG and hard fat showed sufficient adhesiveness and sustained drug release, those using PEG as the base did not. Drug release was controlled by the amount of hard fat and the saponification degree of PVA. The drug release rate was most increased in a tablet containing PVA with an intermediate degree of saponification, PEG and hard fat. From differential scanning calorimetry and powder X-ray diffraction, IM was considered to exist in the molecular phase. From the results of buccal administration of tablets to rats, highest tissue concentrations were observed in the tablet containing PVA with the intermediate degree of saponification using PEG and hard fat, and the plasma concentrations were sufficiently low in comparison.

Co-amorphous Formation Induced by Combination of Tranilast and Diphenhydramine Hydrochloride

In this study, we investigated the formation of a co-amorphous system of tranilast (TRL) and diphenhydramine hydrochloride (DPH), which are drugs used for treating allergies and inflammation. The crystallization from undercooled melts of the drugs and drug mixtures was evaluated by thermal analysis. Both drugs in the amorphous state underwent crystallization on heating, although the mixture remained in the amorphous state, indicating the formation of a co-amorphous system. The physicochemical properties of co-amorphous TRL-DPH prepared by the melting-cooling process were studied. The glass transition temperature of co-amorphous TRL-DPH deviated from the theoretical value. The enthalpy relaxation rate of the amorphous drugs, which reflected the molecular mobility, was reduced by the formation of a co-amorphous system. The intermolecular interactions between TRL and DPH in the co-amorphous system were measured by the change in the IR spectra. These results were consistent with the high physical stability. The co-amorphous sample remained in the amorphous state for over 30 days at 40°C, whereas the amorphous drugs showed rapid crystallization. Our findings demonstrate that TRL and DPH form a co-amorphous system, which dramatically decreases their crystallization without an excipient.

The use of rheology to elucidate the granulation mechanisms of a miscible and immiscible system during continuous twin-screw melt granulation

Twin-screw hot melt granulation (TS HMG) is a valuable, but still unexplored alternative to granulate temperature and moisture sensitive drugs in a continuous way. Recently, the material behavior of an immiscible drug-binder blend during TS HMG was unraveled by using a rheometer and differential scanning calorimetry (DSC). Additionally, vibrational spectroscopic techniques proved the link between TS HMG and rheology since equal interactions at molecular level did occur in both processes. This allowed to use a rheometer to gain knowledge of the material behavior during hot melt processing of an immiscible drug-binder blend. However, miscibility of a drug-binder formulation and drug-binder interactions appear to influence the rheological properties and, hence conceivably also the granulation mechanism. The aim of this research was to examine if the TS HMG process of a miscible formulation system is comparable with the mechanism of an immiscible system and to evaluate whether rheology still serves as a useful tool to understand and optimize the hot melt granulation (HMG) process. The executed research (thermal analysis, rheological parameters and spectroscopic data) demonstrated the occurrence of a high and broad tan(δ) curve without a loss peak during the rheological temperature ramp which implies a higher material deformability without movement of the softened single polymer chains. Spectroscopic analysis revealed drug-polymer interactions which constrain the polymer to flow independently. As a result, the binder distribution step, which generally follows the immersion step, was hindered. This insight assisted the understanding of the granule properties. Inhomogeneous granules were produced due to large initial nuclei or adhesion of multiple smaller nuclei. Consequently, a higher granulation temperature was required in order to get the binder more homogeneously distributed within the granules.

Influence of variation in molar ratio on co-amorphous drug-amino acid systems

Molecular interactions were investigated within four different co-amorphous drug-amino acid systems, namely indomethacin-tryptophan (Ind-Trp), furosemide-tryptophan (Fur-Trp), indomethacin-arginine (Ind-Arg) and furosemide-arginine (Fur-Arg). The co-amorphous systems were prepared by ball milling for 90min at different molar ratios and analyzed by XRPD and DSC. Interactions within the co-amorphous samples were evaluated based on the deviation between the actual glass transition temperature (Tg) and the theoretical Tg calculated by the Gordon-Taylor equation. The strongest interactions were observed in the 50mol% drug (1:1M ratio) mixtures, with the exception of co-amorphous Ind-Arg where the interactions within the 40mol% drug samples appear equally strong. A particularly large deviation between the theoretical and actual Tgs was observed within co-amorphous Ind-Arg and Fur-Arg systems. Further analysis of these co-amorphous systems by (13)C solid-state NMR (ssNMR) and FTIR confirmed that Ind and Fur formed a co-amorphous salt together with Arg. A modified approach of using the Gordon-Taylor equation was applied, using the equimolar co-amorphous mixture as one component, to describe the evolution of the Tgs with varying molar ratio between the drug and the amino acid. The actual Tgs for co-amorphous Ind-Trp, Fur-Trp and Fur-Arg were correctly described by this equation, confirming the assumption that the excess component was amorphous forming a homogeneous single component within the co-amorphous mixture without additional interactions. The modified equation described the Tgs of the co-amorphous Ind-Arg with excess Arg less well indicating possible further interactions; however, the FTIR and ssNMR data did not support the presence of additional intermolecular drug-amino acid interactions.

A Strategy for Co-former Selection to Design Stable Co-amorphous Formations Based on Physicochemical Properties of Non-steroidal Inflammatory Drugs

PURPOSE

This study aimed to investigate the physicochemical factors contributing to stable co-amorphous formations and to design a co-former selection strategy.

METHODS

Non-steroidal inflammatory drugs were used as main components and/or co-formers. Physical mixtures of the materials were melted. Co-amorphization was characterized by the inhibition effect of the co-former on crystallization of the main component from the undercooled melt. The contribution of physicochemical factors to the co-amorphous formation was analyzed by multivariate analysis. Co-amorphous samples prepared by melting were subjected to thermal and spectroscopic analyses and the isothermal crystallization test.

RESULTS

Naproxen (NAP) was employed as the main component having a rapid crystallization tendency. Some materials used as the co-former inhibited the crystallization of amorphous NAP; decreasing melting temperatures of the components was an indicator of co-amorphization. The contribution of some physicochemical features (e.g., crystallization tendency, glass transition temperature (Tg)/melting temperature and molecular flexibility) of the co-formers to a co-amorphous formation was suggested by multivariate analysis. Deviation of the glass transition temperature from the theoretical value and changes in the infrared spectra of the co-amorphous samples were correlated with intermolecular interaction. The crystallization behaviors of the co-amorphous samples depended on their Tg.

CONCLUSIONS

The results showed a relationship between stable co-amorphous formation and the physicochemical features of the components, which should inform efficient co-former selection to design stable co-amorphous formations.

Anomalous role change of tertiary amino and ester groups as hydrogen acceptors in eudragit E based solid dispersion depending on the concentration of naproxen

Eudragit E (EGE) is a basic polymer incorporating tertiary amino and ester groups. The role of the functional groups of EGE in the formation of solid dispersion (SD) with Naproxen (NAP) was investigated. The glass transition temperature (Tg) of EGE decreased with the plasticizing effect of NAP up to 20% weight ratio. Addition of NAP at over 30% induced a rise in Tg, with the maximum value being reached at 60% NAP. Further addition of NAP led to a rapid drop of the Tg. A dramatic difference of physical stability between the SDs including 60 and 70% NAP was confirmed. The SD including 70% NAP rapidly crystallized at 40 °C with 75% relative humidity, while the amorphous state could be maintained over 6 months in the SD with 60% NAP. The infrared and (13)C solid state-NMR spectra of the SDs suggested a formation of ionic interaction between the carboxylic acid of NAP and the amino group of EGE. The SD with 20% NAP raised the (13)C spin-lattice relaxation (T1) of the amino group, but it decreased with over 30% NAP. The change in the (13)C-T1 disappeared with 70% NAP. The (13)C-T1 of the ester group rose depending on the amount of NAP. From these findings, we concluded that the role as hydrogen acceptor shifted from the amine to the ester group with an increase in amount of NAP. Furthermore, the amino group of EGE did not contribute to the interaction at over 70% NAP. These phenomena could be strongly correlated with Tg and stability.