Water permeability and its activation energy for individual hamster pancreatic islet cells

Meta-analysis of the Boyle van 't Hoff relation: Turgor and leak models explain non-ideal volume equilibrium

There has been much recent attention paid to the interaction of cell volume, its regulation, and the molecular biology of the cell. Cells are generally assumed to behave as linear osmometers, with their water volume linearly proportionate to the inverse of osmotic pressure as described by the Boyle van 't Hoff (BvH) relation. This study evaluates the generality of this and other long-standing assumptions about cell responses to anisotonic conditions. We present alternative models that account for osmoregulation including mechanical resistance to volumetric expansion (the turgor model) and ion-osmolyte leakage (the leak model). To evaluate the generality of the BvH relation and determine the suitability of alternative models, we performed a comprehensive survey of the literature and a careful analysis of the resulting data, and then we used these data to compare among models. We identified 137 articles published from 1964 to 2019 spanning 14 animal species and 26 cell types and determined the BvH relation is not an appropriate general model but is adequate when restricted to the hypertonic region. In contrast, models that account for either mechanical resistance or ion-osmolyte leakage fit well to almost all collected data. The leak model has fitted parameters that are in the same range as the current literature estimate, while the turgor model typically requires an elastic modulus value of one or multiple orders of magnitude larger than literature values. However, confirmation of the underlying mechanism of osmotic regulation is required at the cell-specific level and cannot be assumed a priori.

PRISM: A Novel Human Islet Isolation Technique

BACKGROUND

Successful pancreatic islet isolations are a key requirement for islet transplantation in selected patients with type 1 diabetes. However, islet isolation is a technically complex, time-consuming, and manual process. Optimization and simplification of the islet isolation procedure could increase islet yield and quality, require fewer operators, and thus reduce cost.

METHODS

We developed a new, closed system of tissue collection, washing, buffer change, and islet purification termed PancReatic Islet Separation Method (PRISM). In the developmental phase, pump and centrifuge speed was tested using microspheres with a similar size, shape, and density as digested pancreatic tissue. After optimization, PRISM was used to isolate islets from 10 human pancreases.

RESULTS

Islet equivalents viability (fluorescein diacetate/propidium iodide), morphology, and dynamic glucose-stimulated insulin secretion were evaluated. PRISM could be performed by 1 operator in 1 flow cabinet. A similar islet yield was obtained using PRISM compared to the traditional islet isolation method (431 234 ± 292 833 versus 285 276 ± 197 392 islet equivalents, P = 0.105). PRISM islets had similar morphology and functionality.

CONCLUSIONS

PRISM is a novel islet isolation technique that can significantly improve islet isolation efficiency using fewer operators.

Mathematical Modeling and Optimization of Cryopreservation in Single Cells

Cryobiology is a multiscale and interdisciplinary field. The scope and scale of interactions limit the gains that can be made by one theory or experiment alone. Because of this, modeling has played a critical role in both explaining cryobiological phenomena and predicting improved protocols. Modeling facilitates understanding of the biophysical and some of the biochemical mechanisms of damage during all phases of cryopreservation including CPA equilibration and cooling and warming. Moreover, as a tool for optimization of cryopreservation protocols, modeling has yielded many successes. Modern cryobiological modeling includes very detailed descriptions of the physical phenomena that occur during freezing, including ice growth kinetics and spatial gradients that define heat and mass transport models. Here we reduce the complexity and approach only a small but classic subset of these problems. Namely, here we describe the process of building and using a mathematical model of a cell in suspension where spatial homogeneity is assumed for all quantities. We define the models that describe the critical cell quantities used to describe optimal and suboptimal protocols and then give an overview of classical methods of how to determine optimal protocols using these models. We include practical considerations of modeling in cryobiology, including fitting transport models to cell volume data, performing optimization with cell volume constraints, and a look at expanding cost functions to cooling regimes.

Osmotic Separation of Pancreatic Exocrine Cells from Crude Islet Cell Preparations

A novel approach is introduced here to selectively lyse exocrine cells in an islet preparation by hypoosmotic treatment. Time to hypotonic cell lysis required for the islet cells was much longer than that for the exocrine cells, which permits a possibility of selectively killing the exocrine cells by hypotonic treatment. The first set of experiments was designed to select an appropriate osmolality for the hypotonic treatment. Kinetic changes in cell volume in response to extracellular anisosmolalities (30 to 90 mOsm/kg) were recorded using an electronic particle counter. The results indicated that, when exposed to a 30 mOsm/kg solution, islet cells swelled slowly to reach volumetric equilibrium in approximately 3 min. There was no significant hypotonic cell lysis observed even at the end of 4 min (n = 4). In contrast, pancreatic exocrine cells, when exposed to the same solution, expanded rapidly to the lytic volume and burst within 30 s. Significant exocrine cell lysis was invariably achieved within 30 s when cells were exposed to the osmolalities below 60 mOsm/kg. For osmolalities between 70 to 80 mOsm/kg, exocrine cell lysis was highly variable. When cells were exposed to 80 to 90 mOsm/kg, no significant cell lysis was observed. Thus, an osmolality of 50 mOsm/kg is recommended for hypotonic treatment, as it maximizes the lysis of exocrine cells without unnecessarily stressing (osmotically) the islet cells. The second set of experiments (time-course experiments, 20 to 120 s) was designed to determine the length of exposure time for which the exocrine cells were irreversibly damaged but the islet cells had only swollen to such a degree that cell function is restored upon returning to an isotonic condition. Viability of the hypotonic treated cells was evaluated at two different levels: membrane integrity, measured by combined fluorescent dye staining with propidium iodide (PI) and carboxyfluorescein diacetate (CFDA), and mitochondrial function, measured by colorimetric MTT assay. The results showed that hypotonic treatment in a 50 mOsm/kg solution for 30 s resulted in over 85% loss of the membrane integrity for the exocrine cells. About 90% of these membrane lysed cells lost mitochondrial function (n = 3). By contrast, under the same treatment, less than 15% of the islet cells lost membrane integrity and mitochondrial function (n = 3). In conclusion, hypotonic treatment with a 50 mOsm/kg solution for 20 to 30 s at room temperature is sufficient to lyse the majority of the contaminating exocrine cells in an islet cell preparation, while maintaining function in the islet cells.

Microfluidics for cryopreservation

Cryopreservation has utility in clinical and scientific research but implementation is highly complex and includes labor-intensive cell-specific protocols for the addition/removal of cryoprotective agents and freeze-thaw cycles. Microfluidic platforms can revolutionize cryopreservation by providing new tools to manipulate and screen cells at micro/nano scales, which are presently difficult or impossible with conventional bulk approaches. This review describes applications of microfluidic tools in cell manipulation, cryoprotective agent exposure, programmed freezing/thawing, vitrification, and in situ assessment in cryopreservation, and discusses achievements and challenges, providing perspectives for future development.

Determination of the temperature-dependent cell membrane permeabilities using microfluidics with integrated flow and temperature control

We developed an integrated microfluidic platform for instantaneous flow and localized temperature control. The platform consisted of a flow-focusing region for sample delivery and a cross-junction region embedded with a microheater for cell trapping and localized temperature control by using an active feedback control system. We further used it to measure the membrane transport properties of Jurkat cells, including the osmotically inactive cell volume (V_b) and cell membrane permeabilities to water (L_p) and to cryoprotective agent (CPA) solutions (dimethyl sulfoxide (DMSO) in this study) (P_S) at various temperatures (room temperature, 30 °C, and 37 °C). Such characteristics of cells are of great importance in many applications, especially in optimal cryopreservation. With the results, the corresponding activation energy for water and CPA transport was calculated. The comparison of the results from the current study with reference data indicates that the developed platform is a reliable tool for temperature-dependent cell behavior study, which provides valuable tools for general cell manipulation applications with precise temperature control.

Sensing and Sensibility: Single-Islet-based Quality Control Assay of Cryopreserved Pancreatic Islets with Functionalized Hydrogel Microcapsules

Despite decades of research and clinical studies of islet transplantations, finding simple yet reliable islet quality assays that correlate accurately with in vivo potency is still a major challenge, especially for real-time and single-islet-based quality assessment. Herein, proof-of-concept studies of a cryopreserved microcapsule-based quality control assays are presented for single islets. Individual rat pancreatic islets and fluorescent oxygen-sensitive dye (FOSD) are encapsulated in alginate hydrogel microcapsules via a microfluidic device. To test the susceptibility of the microcapsules and the FOSD to cryopreservation, the islet microcapsules containing FOSD are cryopreserved and the islet functionalities (adenosine triphosphate, static insulin release measurement, and oxygen consumption rate) are assessed after freezing and thawing steps. The cryopreserved islet capsules with FOSD remain functional after encapsulation and freezing/thawing procedures, validating a simple yet reliable individual-islet-based quality control method for the entire islet processing procedure prior to transplantation. This work also demonstrates that the functionality of cryopreserved islets can be improved by introducing trehalose into the routinely used cryoprotectant dimethyl sulfoxide. The functionalized alginate hydrogel microcapsules with embedded FOSD and optimized cryopreservation protocol presented in this work serve as a versatile islet quality assay and offer tremendous promise for tackling existing challenges in islet transplantation procedures.

Non-ideal solution thermodynamics of cytoplasm

Quantitative description of the non-ideal solution thermodynamics of the cytoplasm of a living mammalian cell is critically necessary in mathematical modeling of cryobiology and desiccation and other fields where the passive osmotic response of a cell plays a role. In the solution thermodynamics osmotic virial equation, the quadratic correction to the linear ideal, dilute solution theory is described by the second osmotic virial coefficient. Herein we report, for the first time, intracellular solution second osmotic virial coefficients for four cell types [TF-1 hematopoietic stem cells, human umbilical vein endothelial cells (HUVEC), porcine hepatocytes, and porcine chondrocytes] and further report second osmotic virial coefficients indistinguishable from zero (for the concentration range studied) for human hepatocytes and mouse oocytes.

Modeling and optimization of cryopreservation

Modeling plays a critical role in understanding the biophysical processes behind cryopreservation. It facilitates understanding of the biophysical and some of the biochemical mechanisms of damage during all phases of cryopreservation including CPA equilibration, cooling, and warming. Modeling also provides a tool for optimization of cryopreservation protocols and has yielded a number of successes in this regard. While modern cryobiological modeling includes very detailed descriptions of the physical phenomena that occur during freezing, including ice growth kinetics and spatial gradients that define heat and mass transport models, here we reduce the complexity and approach only a small but classic subset of these problems. Namely, here we describe the process of building and using a mathematical model of a cell in suspension where spatial homogeneity is assumed for all quantities. We define the models that describe the critical cell quantities used to describe optimal and suboptimal protocols and then give an overview of classical methods of how to determine optimal protocols using these models.

Foundations of modeling in cryobiology-I: concentration, Gibbs energy, and chemical potential relationships

Mathematical modeling plays an enormously important role in understanding the behavior of cells, tissues, and organs undergoing cryopreservation. Uses of these models range from explanation of phenomena, exploration of potential theories of damage or success, development of equipment, and refinement of optimal cryopreservation/cryoablation strategies. Over the last half century there has been a considerable amount of work in bio-heat and mass-transport, and these models and theories have been readily and repeatedly applied to cryobiology with much success. However, there are significant gaps between experimental and theoretical results that suggest missing links in models. One source for these potential gaps is that cryobiology is at the intersection of several very challenging aspects of transport theory: it couples multi-component, moving boundary, multiphase solutions that interact through a semipermeable elastic membrane with multicomponent solutions in a second time-varying domain, during a two-hundred Kelvin temperature change with multi-molar concentration gradients and multi-atmosphere pressure changes. In order to better identify potential sources of error, and to point to future directions in modeling and experimental research, we present a three part series to build from first principles a theory of coupled heat and mass transport in cryobiological systems accounting for all of these effects. The hope of this series is that by presenting and justifying all steps, conclusions may be made about the importance of key assumptions, perhaps pointing to areas of future research or model development, but importantly, lending weight to standard simplification arguments that are often made in heat and mass transport. In this first part, we review concentration variable relationships, their impact on choices for Gibbs energy models, and their impact on chemical potentials.

Improved Islet Purity by the Hypertonic-Hypotonic Method

Introduction

Islet purification is usually performed using the density gradient separation method, but the purity of islets is low because exocrine cells and the embedded islets are hard to remove by using only the density gradient method. The aim of this study was to establish a new islet purification process comprising a hypertonic-hypotonic treatment step followed by a density gradient centrifugation step to improve the purity of islets.

Methods

The Plackett-Burman method was used to determine which factors had a significant influence on the purity of islets obtained after the hypertonic-hypotonic treatment step.

Results

The hypertonic solution concentration and the incubation time were both found to have a significant effect on islet purity. The purity of islets obtained using the modified purification process was significantly higher than that of islets obtained by density gradient alone (97% vs. 87.23%). Importantly, good cell viability and normal insulin secretion ability of islets were maintained following the modified purification.

Conclusions

The new purification process allows isolation of islets with improved purity and does not compromise the viability or function of the islets.

Theoretical and experimental analyses of optimal experimental design for determination of hydraulic conductivity of cell membrane

Determination of cell hydraulic conductivity (Lp) is required to predict the optimal conditions for cell cryopreservation. One of the critical procedures associated with the determination of Lp is to measure the kinetics of cell volume change in response to a sudden cell exposure to anisosmotic media until the cells achieve an osmotic equilibrium state. To achieve accurate measurement, it should be ensured that (1) the cell osmotic equilibration process is sufficiently slow, and (2) the total cell volume change (ΔV) is much larger than the resolution of the measuring device (δ). In this article, a cell's half volume excursion time (t*) was defined as the time in which osmotically active cell water volume increases or decreases by half of its maximum change. Based on the water transport equations, a series of analytical solutions were derived. The t* and ΔV were expressed as functions of 2 control variables: initial intracellular osmolality (Mo) and extracellular osmolality (Me), and the effects of Me and Mo on t* and ΔV were predicted theoretically. The predictions were confirmed by performing experiments using two different cell types. In the light of this study, a strategy to optimize the experiment design for the Lp determination is suggested.

An Application of Stream Imaging Technique in the Study of Osmotic Behaviors of Multiple Cells

Light microscopy method offers unique abilities for the determination of membrane transport properties of either single or multiple cells. A stream imaging system composed of a microfluidic device, a charge-coupled device camera, and a microscope has been developed to study the osmotic behavior of multiple cells in response toward their extracellular environment. Cells of interest were first mixed with the desired extracellular medium and streamed into a microchannel. The microchannel confines the movement of the cells in a monolayer and allows cells to move along the flow direction only. The cells then pass through a sensing zone where the images of cells were capable of being captured under a microscope. Using mouse dendritic cells (mDCs) as a model system, the membrane transport properties were investigated. The kinetics volume changes of mDCs under various extracellular conditions at room temperature (22°C) were analyzed using a biophysical model to determine water and cryoprotectant transport properties of the cell membrane. This prototype system directly allows us to observe, trace, capture, and store the sample information in terms of number, concentration, dynamic size, or shape for further analyses and documentations. We believe that the system has the potential of being used as a stand-alone equipment, or integrated into a lab-on-a-chip system, or embedded into commercialized instruments.

Development of a microfluidic device for determination of cell osmotic behavior and membrane transport properties

An understanding of cell osmotic behavior and membrane transport properties is indispensable for cryobiology research and development of cell-type-specific, optimal cryopreservation conditions. A microfluidic perfusion system is developed here to measure the kinetic changes of cell volume under various extracellular conditions, in order to determine cell osmotic behavior and membrane transport properties. The system is fabricated using soft lithography and is comprised of microfluidic channels and a perfusion chamber for trapping cells. During experiments, rat basophilic leukemia (RBL-1 line) cells were injected into the inlet of the device, allowed to flow downstream, and were trapped within a perfusion chamber. The fluid continues to flow to the outlet due to suction produced by a Hamilton Syringe. Two sets of experiments have been performed: the cells were perfused by (1) hypertonic solutions with different concentrations of non-permeating solutes and (2) solutions containing a permeating cryoprotective agent (CPA), dimethylsulfoxide (Me(2)SO), plus non-permeating solute (sodium chloride (NaCl)), respectively. From experiment (1), cell osmotically inactive volume (V(b)) and the permeability coefficient of water (L(p)) for RBL cells are determined to be 41% [n=18, correlation coefficient (r(2)) of 0.903] of original/isotonic volume, and 0.32+/-0.05 microm/min/atm (n=8, r(2)>0.963), respectively, for room temperature (22 degrees C). From experiment (2), the permeability coefficient of water (L(p)) and of Me(2)SO (P(s)) for RBL cells are 0.38+/-0.09 microm/min/atm and (0.49+/-0.13) x 10(-3)cm/min (n=5, r(2)>0.86), respectively. We conclude that this device enables us to: (1) readily monitor the changes of extracellular conditions by perfusing single or a group of cells with prepared media; (2) confine cells (or a cell) within a monolayer chamber, which prevents imaging ambiguity, such as cells overlapping or moving out of the focus plane; (3) study individual cell osmotic response and determine cell membrane transport properties; and (4) reduce labor requirements for its disposability and ensure low manufacturing costs.

Quantitative Examination of a Perfusion Microscope for the Study of Osmotic Response of Cells

The perfusion microscope was developed for the study of the osmotic response of cells. In this microscope, the cells are immobilized in a transparent chamber mounted on the stage and exposed to a variety of milieus by perfusing the chamber with solutions of different concentrations. The concentration of the supplied solution is controlled using two variable-speed syringe pumps, which supply an isotonic solution and a hypertonic solution. Before using this system to characterize the osmotic response of cells, the change in the concentration of NaCl solution flowing through the chamber is examined quantitatively using a laser interferometer and an image processing technique. The NaCl concentration is increased from an isotonic condition to a hypertonic condition abruptly or gradually at a given constant rate, and decreased from a hypertonic condition to an isotonic condition. It is confirmed that the concentration is nearly uniform in the cross direction at the middle of the chamber, and the change in the NaCl concentration is reproducible. The average rate of increase or decrease in the measured concentration agrees fairly well with the given rate when the concentration is changed gradually at a constant rate. The rate of the abrupt change is also determined to be the highest limit achieved by the present method. As the first application of using the perfusion microscope for biological studies, the volume change of cells after exposure to a hypertonic solution is measured. Then, the hydraulic conductivity of the cell membrane is determined from the comparison of the volume change between the experiment and the theoretical estimation for the measured change in the NaCl concentration of the perfused solution.

Thermal modeling of lesion growth with radiofrequency ablation devices

BACKGROUND

Temperature is a frequently used parameter to describe the predicted size of lesions computed by computational models. In many cases, however, temperature correlates poorly with lesion size. Although many studies have been conducted to characterize the relationship between time-temperature exposure of tissue heating to cell damage, to date these relationships have not been employed in a finite element model.

METHODS

We present an axisymmetric two-dimensional finite element model that calculates cell damage in tissues and compare lesion sizes using common tissue damage and iso-temperature contour definitions. The model accounts for both temperature-dependent changes in the electrical conductivity of tissue as well as tissue damage-dependent changes in local tissue perfusion. The data is validated using excised porcine liver tissues.

RESULTS

The data demonstrate the size of thermal lesions is grossly overestimated when calculated using traditional temperature isocontours of 42 degrees C and 47 degrees C. The computational model results predicted lesion dimensions that were within 5% of the experimental measurements.

CONCLUSION

When modeling radiofrequency ablation problems, temperature isotherms may not be representative of actual tissue damage patterns.

Osmotic parameters of cells from a bioengineered human corneal equivalent and consequences for cryopreservation

A human corneal equivalent is under development with potential applications in pharmaceutical testing, biomedical research, and transplantation, but the ability to distribute this engineered tissue, depends on successful cryopreservation. Tissue recovery after exposure to conditions during cryopreservation depends on the response of its constituent cells to the changing environment as ice forms and solutes concentrate. This study defines the osmotic properties that define the rate of water movement across the plasma membrane of isolated human corneal endothelial, stroma, and epithelial cells. Cells were transferred from an isotonic (300 mosm/kg) to an anisotonic (150-1500 mosm/kg) solution at constant temperature, and cell volumes monitored using an electronic particle counter. Histograms describing cell volume changes over time after anisosmotic exposure allowed calculation of hydraulic conductivity (L(p)) and osmotically inactive volume fraction (V(b)). Experimental values for L(p) at 4, 13, 22, and 37 degrees C were used to determine the Arrhenius activation energy (E(a)). The L(p) for endothelial, stroma, and epithelial cells at 37 degrees C was 1.98+/-0.32,1.50+/-0.30, and 1.19+/-0.14 microm/min/atm, and the V(b) was 0.28, 0.27, and 0.41, respectively. The E(a) for endothelial, stroma, and epithelial cells was 14.8, 12.0, and 14.1 kcal/mol, respectively, suggesting the absence of aqueous pores. These osmotic parameters and temperature dependencies allow simulation of osmotic responses of human corneal cells to cryopreservation conditions, allowing amount of supercooling to be calculated to indicate the likelihood of intracellular freezing. Simulations show that differences in the osmotic parameters for the constituent cells in the bioengineered cornea result in significant implications for cryopreservation of the engineered corneal equivalent.

The effect of temperature on membrane hydraulic conductivity

The objective of this study was to use the temperature dependence of water permeability to suggest the physical mechanisms of water transport across membranes of osmotically slowly responding cells and to demonstrate that insight into water transport mechanisms in these cells may be gained from easily performed experiments using an electronic particle counter. Osmotic responses of V-79W Chinese hamster fibroblast cells were measured in hypertonic solutions at various temperatures and the membrane hydraulic conductivity was determined. The results were fit with the general Arrhenius equation with two free parameters, and also fit with two specific membrane models each having only one free parameter. Data from the literature including that for human bone marrow stem cells, hamster pancreatic islets, and bovine articular cartilage chondrocytes were also examined. The results indicated that the membrane models could be used in conjunction with measured permeability data at different temperatures to investigate the method of water movement across various cell membranes. This approach for slower responding cells challenges the current concept that the presence of aqueous pores is always accompanied by an osmotic water permeability value, P(f)>0.01 cm/s. The possibility of water transport through aqueous pores in lower-permeability cells is proposed.

Temperature dependence of Kedem-Katchalsky membrane transport coefficients for mature mouse oocytes in the presence of ethylene glycol

Ethylene glycol (EG) is the emerging cryoprotectant of choice for preservation of mammalian embryos but has not been widely used for oocyte preservation. Techniques for oocyte cryopreservation need to be improved before they can be incorporated into routine clinical practice. Hence the permeability characteristics of oocytes in the presence of EG have been determined in order to facilitate the design of cryopreservation protocols using this cryoprotectant. Individual mouse oocytes were held using negative pressure applied to the zona pellucida by means of a micropipet. Each oocyte was perfused with 1 ml 1.5 mol L(-1) EG at 30, 19, or 10 degrees C, a total of 10 oocytes being perfused at each temperature. The osmotic response of each oocyte before, during and after perfusion was recorded on videotape. Measurements of mean cell diameter across three axes were used to calculate oocyte volume, assuming them to be spherical, and, using mathematical modeling, values for hydraulic conductivity (L(p)) were found to be 0.91 +/- 0.05, 0.51 +/- 0.02, and 0.18 +/- 0.01 microm min(-1) atm(-1); cryoprotectant permeability (P(EG)) was 0.24 +/- 0.01, 0.09 +/- 0.005, and 0.03 +/- 0.004 microm s(-1); and reflection coefficient (sigma) was 0.98 +/- 0.005, 0.96 +/- 0.01, and 0.97 +/- 0.01 at 30, 19, and 10 degrees C, respectively. The activation energy (E(a)) of L(p) was 14. 0 kCal mol(-1) and of P(EG) was 16.4 kCal mol(-1).

Hydraulic conductivity (Lp) and its activation energy (Ea), cryoprotectant agent permeability (Ps) and its Ea, and reflection coefficients (sigma) for golden hamster individual pancreatic islet cell membranes

Long-term cryopreservation of islets of Langerhans would be advantageous to a clinical islet transplantation program. Fundamental cryobiology utilizes knowledge of basic biophysical characteristics to increase the understanding of the preservation process and possibly increase survival rate. In this study several of these previously unreported characteristics have been determined for individual islet cells isolated from Golden hamster islets. Using an electronic particle counting device and a temperature control apparatus, dynamic volumetric response of individual islet cells to anisosmotic challenges of 1.5 M dimethyl sulfoxide (DMSO) and 1.5 M ethylene glycol (EG) were recorded at four temperatures (8, 22, 28, and 37 degreesC). The resulting curves were fitted using Kedem and Katchalsky equations which describe water flux and cryoprotectant agent (CPA) flux based on hydraulic conductivity (Lp), CPA permeability (Ps), and reflection coefficient (final sigma) for the membrane. For Golden hamster islet cells, Lp, Ps, and final sigma for DMSO at 22 degreesC were found to be 0.23 +/- 0.06 microm/min/atm, 0.79 +/- 0.32 x 10(-3) cm/min, and 0.55 +/- 0.37 (n = 11) (mean +/- SD), respectively. For EG at 22 degreesC, Lp equaled 0.23 +/- 0.06 microm/min/atm, Ps equaled 0.63 +/- 0.20 x 10(-3) cm/min, and final sigma was 0.75 +/- 0.17 (n = 9). Arrhenius plots (ln Lp or ln Ps versus 1/temperature (K)) were created by adding the data from the other three temperatures and the resulting linear regression yielded correlation coefficients (r) of 0.99 for all four plots (Lp and Ps for both CPAs). Activation energies (Ea) of Lp and Ps were calculated from the slopes of the regressions. The values for DMSO were found to be 12.43 and 18.34 kcal/mol for Lp and Ps (four temperatures, total n = 52), respectively. For EG, Ea of Lp was 11.69 kcal/mol and Ea of Ps was 20.35 kcal/mol (four temperatures, total n = 58).

Fundamental cryobiology of human hematopoietic progenitor cells. I: Osmotic characteristics and volume distribution

While methods for the cryopreservation of hematopoietic stem cells are well established, new sources of progenitor cells, such as umbilical cord blood, fetal tissue, and ex vivo expanded progenitor cells, may require refined protocols to achieve optimal recovery after freezing. To predict optimal protocols for cryopreservation of human hematopoietic progenitors, knowledge of fundamental cryobiological characteristics including cell osmotic characteristics, water and cryoprotectant permeability coefficients of cell membrane, and activation energies of these coefficients is required. In this study, we used CD34+CD33- cells isolated from human bone marrow as hematopoietic progenitor cell models/representatives to study the osmotic characteristics of the progenitor cells. Volume distribution and osmotic behavior of the CD34+CD33- cells were determined using two different methods: (a) a shape-independent electronic sizing technique and (b) a shape-dependent optical image analysis. The cell diameter was measured to be 8.2 +/- 1.1 microns (mean +/- SD, n = 1,091,475, the number of donors = 8) using the electronic sizing technique or 8.7 +/- 1.2 microns (mean +/- SD, n = 1508, the number of donors = 6) by image analysis at initial (isotonic) osmolality, 325 mosm/kg. The cell volume change was measured after the cells were exposed and equilibrated to different anisosmotic conditions. The cell volume was found to be a linear function of the reciprocal of the extracellular osmolality (Boyle van't Hoff plot) ranging from 163 to 1505 mosm/kg. The volume fraction of intracellular water which is osmotically active was determined to be 79.5% of the cell volume. It was concluded that human CD34+CD33- cells osmotically behave as ideal osmometers. This information coupled with cell water and cryoprotectant permeability coefficients as well as their activation energies (to be determined in the ongoing research projects) will be used to design optimum conditions for cryopreservation of human hematopoietic progenitor cells.

Glucose-induced swelling in rat pancreatic beta-cells

1. Changes in relative cell volume in response to hypotonic solutions and glucose were studied in single isolated rat pancreatic beta-cells using a video-imaging technique. beta-cell electrical activity was recorded under similar conditions using the perforated patch technique. 2. Exposure of beta-cells to hypotonic solutions (10 and 33% hypotonicity) caused an immediate increase in cell volume to relative values of 1.09 and 1.33, respectively. This was followed by a gradual regulatory volume decrease. 3. Raising the concentration of glucose from 4 to 20 mM or 12 mM (with substitution of mannitol) increased beta-cell volume by 12 and 10%, respectively. This effect of glucose persisted when CO2+ was added to inhibit insulin release. Glucose-induced volume increases were sustained for the duration of exposure to elevated hexose concentration. The addition of 16 mM 3-O-methylglucose, which is transported into the beta-cell but not metabolized, produced only a transient 5% increase in beta-cell volume. 4. Exposure of beta-cells to a 15% hypotonic solution resulted in a transient depolarization and electrical activity. Raising the glucose concentration to 20 or 12 mM caused a sustained depolarization and generation of electrical activity. However, the addition of 16 mM 3-O-methylglucose had no effect on beta-cell membrane potential. The glucose-induced increase in volume and induction of electrical activity, when measured in single beta-cells simultaneously, showed comparable kinetics. 5. The secretion of insulin from intact pancreatic islets was stimulated by exposure to hypotonic solutions (10-33% hypotonicity). A 15% hypotonic solution stimulated insulin release to a peak value comparable to that elicited by raising the glucose concentration from 4 to 20 mM. Whereas hypotonic solutions caused a transient stimulation of insulin release, the effect of glucose was sustained. 6. It is suggested that glucose increases the volume in rat pancreatic beta-cells by a mechanism dependent upon metabolism of the sugar. The extent of cell swelling evoked by raised glucose concentrations is sufficient to depolarize the cells and induce electrical and secretory activity and may involve activation of a volume-sensitive anion conductance.

The determination of membrane permeability coefficients of canine pancreatic islet cells and their application to islet cryopreservation

Sufficient numbers of pancreatic islets for successful allotransplantation can be achieved by storing and then pooling islets from several donors. Optimal MHC matching and infectious disease screening also require long-term storage of islets, and cryopreservation is currently the only practical approach. Cryopreservation protocols may be optimized by modeling the changes in cell volume and the associated damage incurred during cryoprotectant addition and dilution and during cooling and warming. The objective of the present work was to determine the following biophysical parameters of canine islet cells; the osmotically inactive cell volume (Vb), hydraulic conductivity (Lp), cryoprotectant permeability coefficient (Ps), and the reflection coefficient sigma. A determination of these parameters allows the simulation of cell responses using computer models. Islets were isolated by collagenase digestion and Euro-Ficoll purification. After 24 h culture, islets were dissociated into single cells using trypsin and 2 mM EGTA. The kinetic change in cell volume as a function of time after exposure to 2 M dimethyl sulfoxide (Me2SO) was measured using an electronic particle counter at 22, 5, and -3 degrees C. At -11 degrees C, cells were preloaded with 1 M Me2SO and exposed to 4 M Me2SO to prevent the formation of ice in the working solution. Kedem-Katchalsky theory was used to describe the cell volume change kinetics, and a three-parameter curve fitting was performed using the Marquardt-Levenberg method to determine Lp, Ps, and sigma values. The Lp was determined to be 0.19 +/- 0.05, 0.037 +/- 0.005, 0.020 +/- 0.003, and 0.013 +/- 0.005 micron.min-1.atm-1 (mean +/- SD) at 22, 5, -3, and -11 degrees C, respectively. The Ps values were 1.05 +/- 0.50, 0.15 +/- 0.04, 0.096 +/- 0.028, and 0.067 +/- 0.029 x 10(-3) cm.min-1 at 22, 5, -3, and -11 degrees C, respectively. The sigma values were 0.81 +/- 0.16, 0.91 +/- 0.09, 0.80 +/- 0.21, and 0.98 +/- 0.04 at 22, 5, -3, and -11 degrees C, respectively. The temperature dependence or activation energy of Lp and Ps was calculated, using the Arrhenius equation, to be 12.7 and 13.5 kcal.mol-1, respectively. These permeability parameters were used to calculate cell water loss and the likelihood of lethal intracellular freezing during cooling, as well as both water flux and solute concentration gradients across the cell membrane during warming.

Development of a novel microperfusion chamber for determination of cell membrane transport properties

A novel microperfusion chamber was developed to measure kinetic cell volume changes under various extracellular conditions and to quantitatively determine cell membrane transport properties. This device eliminates modeling ambiguities and limitations inherent in the use of the microdiffusion chamber and the micropipette perfusion technique, both of which have been previously validated and are closely related optical technologies using light microscopy and image analysis. The resultant simplicity should prove to be especially valuable for study of the coupled transport of water and permeating solutes through cell membranes. Using the microperfusion chamber, water and dimethylsulfoxide (DMSO) permeability coefficients of mouse oocytes as well as the water permeability coefficient of golden hamster pancreatic islet cells were determined. In these experiments, the individual cells were held in the chamber and perfused at 22 degrees C with hyperosmotic media, with or without DMSO (1.5 M). The cell volume change was videotaped and quantified by image analysis. Based on the experimental data and irreversible thermodynamics theory for the coupled mass transfer across the cell membrane, the water permeability coefficient of the oocytes was determined to be 0.47 micron. min-1. atm-1 in the absence of DMSO and 0.65 microns. min-1. atm-1 in the presence of DMSO. The DMSO permeability coefficient of the oocyte membrane and associated membrane reflection coefficient to DMSO were determined to be 0.23 and 0.85 micron/s, respectively. These values are consistent with those determined using the micropipette perfusion and microdiffusion chamber techniques. The water permeability coefficient of the golden hamster pancreatic islet cells was determined to be 0.27 microns. min-1. atm-1, which agrees well with a value previously determined using an electronic sizing (Coulter counter) technique. The use of the microperfusion chamber has the following major advantages: 1) This method allows the extracellular condition(s) to be readily changed by perfusing a single cell or group of cells with a prepared medium (cells can be reperfused with a different medium to study the response of the same cell to different osmotic conditions). 2) The short mixing time of cells and perfusion medium allows for accurate control of the extracellular osmolality and ensures accuracy of the corresponding mathematical formulation (modeling). 3) This technique has wide applicability in studying the cell osmotic response and in determining cell membrane transport properties.