Extraction of extracellular polymeric substances from the photosynthetic bacterium Rhodopseudomonas acidophila

Tyrosol blocks E. coli anaerobic biofilm formation via YbfA and FNR to increase antibiotic susceptibility

Bacteria within mature biofilms are highly resistant to antibiotics than planktonic cells. Oxygen limitation contributes to antibiotic resistance in mature biofilms. Nitric oxide (NO) induces biofilm dispersal; however, low NO levels stimulate biofilm formation, an underexplored process. Here, we introduce a mechanism of anaerobic biofilm formation by investigating the antibiofilm activity of tyrosol, a component in wine. Tyrosol inhibits E. coli and Pseudomonas aeruginosa biofilm formation by enhancing NO production. YbfA is identified as a target of tyrosol and its downstream targets are sequentially determined. YbfA activates YfeR, which then suppresses the anaerobic regulator FNR. This suppression leads to decreased NO production, elevated bis-(3'-5')-cyclic dimeric GMP levels, and finally stimulates anaerobic biofilm formation in the mature stage. Blocking YbfA with tyrosol treatment renders biofilm cells as susceptible to antibiotics as planktonic cells. Thus, this study presents YbfA as a promising antibiofilm target to address antibiotic resistance posed by biofilm-forming bacteria, with tyrosol acting as an inhibitor.

Inhibition of iron oxidation in Acidithiobacillus ferrooxidans by low-molecular-weight organic acids: Evaluation of performance and elucidation of mechanisms

The catalytic role of Acidithiobacillus ferrooxidans (A. ferrooxidans) in iron biooxidation is pivotal in the formation of Acid Mine Drainage (AMD), which poses a significant threat to the environment. To control AMD generation, treatments with low-molecular-weight organic acids are being studied, yet their exact mechanisms are unclear. In this study, AMD materials, organic acids, and molecular methods were employed to gain a deeper understanding of the inhibitory effects of low-molecular-weight organic acids on the biooxidation of iron by A. ferrooxidans. The inhibition experiments of A. ferrooxidans on the oxidation of Fe2+ showed that to attain a 90 % inhibition efficacy within 72 h, the minimum concentrations required for formic acid, acetic acid, propionic acid, and lactic acid are 0.5, 6, 4, and 10 mmol/L, respectively. Bacterial imaging illustrated the detrimental effects of these organic acids on the cell envelope structure. This includes severe damage to the outer membrane, particularly from formic and acetic acids, which also caused cell wall damage. Coupled with alterations in the types and quantities of protein, carbohydrate, and nucleic acid content in extracellular polymeric substances (EPS), indicate the mechanisms underlying these inhibitory treatments. Transcriptomic analysis revealed interference of these organic acids with crucial metabolic pathways, particularly those related to energy metabolism. These findings establish a comprehensive theoretical basis for understanding the inhibition of A. ferrooxidans' biooxidation by low-molecular-weight organic acids, offering a novel opportunity to effectively mitigate the generation of AMD at its source.

Differentiation and quantification of extracellular polymeric substances from microalgae and bacteria in the mixed culture

Extracellular polymeric substances (EPS) play significant roles in the formation, function, and interactions of microalgal-bacteria consortia. Understanding the key roles of EPS depends on reliable extraction and quantification methods, but differentiating of EPS from microalgae versus bacteria is challenging. In this work, cation exchange resin (CER) and thermal treatments were applied for total EPS extraction from microalgal-bacteria mixed culture (MBMC), flow cytometry combined with SYTOX Green staining was applied to evaluate cell disruption during EPS extraction, and auto-fluorescence-based cell sorting (AFCS) was used to separate microalgae and bacteria in the MBMC. Thermal extraction achieved much higher EPS yield than CER, but higher temperature and longer time reduced cell activity and disrupted the cells. The highest EPS yield with minimal loss of cell activity and cell disruption was achieved using thermal extraction at 55℃ for 30 min, and this protocol gave good results for MBMC with different microalgae:bacteria (M:B) mass ratios. AFCS combined with thermal treatment achieved the most-efficient biomass differentiation and low EPS loss (<4.5 %) for the entire range of M:B ratios. EPS concentrations in bacteria were larger than in microalgae: 42.8 ± 0.4 mg COD/g TSS versus 9.19 ± 0.38 mg COD/g TSS. These findings document sensitive and accurate methods to extract and quantify EPS from microalgal-bacteria aggregates.

Continuous valorization of food waste and oily food waste using bacteria-pumice and bacteria-smectite nanocomposites: Alternative cell immobilization and zooplankton lifespan impact

Recycling waste into commercial products is a profitable strategy but the lifetime of immobilized cells for long-term waste treatment remains a problem. This study presents alternative cell immobilization methods for valorizing food waste (FW) and oily food waste (OFW) to microbial carotenoids and proteins. Carriers (pumice or smectite), magnetite nanoparticles, and isolated photosynthetic bacteria were integrated to obtain magnetically recoverable bacteria-pumice and bacteria-smectite nanocomposites. After recycling five batches (50 d), chemical oxygen demand removal from FW reached 76% and 78% with the bacteria-pumice and bacteria-smectite nanocomposite treatments, respectively, and oil degradation in OFW reached 71% and 62%, respectively. Destructive changes did not occur, suggesting the durability of nanocomposites. The used nanocomposites had no impact on the lifespan of Moina macrocopa or water quality as assessed by toxicity analysis. Bacteria-pumice and bacteria-smectite nanocomposites are efficient for food waste recycling and do not require secondary treatment before being discharged into the environment.

Efficacy of exopolysaccharide in dye-laden wastewater treatment: A comprehensive review

The discharge of dye-laden wastewater into the water streams causes severe water and soil pollution, which poses a global threat to aquatic ecosystems and humans. A diverse array of microorganisms such as bacteria, fungi, and algae produce exopolysaccharides (EPS) of different compositions and exhibit great bioflocculation potency to sustainably eradicate dyes from water bodies. Nanomodified chemical composites of EPS enable their recyclability during dye-laden wastewater treatment. Nevertheless, the selection of potent EPS-producing strains and physiological parameters of microbial growth and the remediation process could influence the removal efficiency of EPS. This review will intrinsically discuss the fundamental importance of EPS from diverse microbial origins and their nanomodified chemical composites, the mechanisms in EPS-mediated bioremediation of dyes, and the parametric influences on EPS-mediated dye removal through sorption/bioflocculation. This review will pave the way for designing and adopting futuristic green and sustainable EPS-based bioremediation strategies for dye-laden wastewater in situ and ex situ.

The role of extracellular polymeric substances (EPS) in chemical-degradation of persistent organic pollutants in soil: A review

Persistent organic pollutants (POPs) in soil show high environmental risk due to their high toxicity and low biodegradability. Studies have demonstrated the degradation function of microbial extracellular polymeric substances (EPS) on POPs in various matrices. However, the degradation mechanisms and the factors that influence the process in soil have not been clearly illustrated. In this review, the characteristics of EPS were introduced and the possible mechanisms of EPS on degradation of organic pollutants (e.g., external electron transfer, photodegradation, and enzyme catalysis) were comprehensively discussed. In addition, the environmental conditions (e.g., UV, nutrients, and redox potential) that could influence the production and degradation-related active components of EPS were addressed. Moreover, the current approaches on the application of EPS in biotechnology were summarized. Further, the future perspectives of enhancement on degradation of POPs by regulating EPS were discussed. Overall, this review could provide a new thought on remediation of POPs by widely-existing EPS in soil with low-cost and minimized eco-disturbance.

Production and composition of extracellular polymeric substances by a unicellular strain and natural colonies of Microcystis: Impact of salinity and nutrient stress

The transfer of toxic cyanobacterial Microcystis blooms from freshwater to estuaries constitutes a serious environmental problem worldwide that is expected to expand in scale and intensity with anthropogenic and climate change. The formation and maintenance of Microcystis in colonial form is conditioned to the presence of extracellular polymeric substances (EPS). In this study, we attempted to better understand how the mucilaginous colonial form of Microcystis evolves under environmental stress conditions. In particular, we studied and compared the production and the composition of EPS fractions (attached and free) from natural colonies of a Microcystis bloom and from a unicellular M. aeruginosa strain under salinity and nutrient stress (representing a land-sea continuum). Our results highlighted a greater production of EPS from the natural colonies of Microcystis than the unicellular one under nutrient and combined stress conditions dominated by the attached form. In comparison to the unicellular Microcystis, EPS produced by the colonial form were characterized by high molecular weight polysaccharides which were enriched in uronic acids and hexosamines, notably for the free fraction in response to increased salinities. This complex extracellular matrix gives the cells the ability to aggregate and allows the colonial cyanobacterial population to cope with osmotic shock.

Bioleaching of metals from spent fluid catalytic cracking catalyst using adapted Acidithiobacillus caldus

In this study, an adapted bioleaching strain of Acidithiobacillus caldus UVS10 was successfully developed. Batch tests and tests in bioreactor were conducted to evaluate the metals bioleaching performance of A. caldus UVS10 to spent FCC catalyst (SFCCC). Results of batch experiments showed the bioleaching efficiency of Ni, V, La, and Ce in SFCCC reached 19.40%, 22.06%, 53.75%, and 59.56%, respectively. High SFCCC pulp density inhibited the leaching of metals. Sb leaching was inhibited in acidic environment caused by A. caldus UVS10. Contents of Ni, V, La, and Ce in extracellular polymeric substances (EPS) were significantly higher than those intracellular. Accumulation of metal in EPS and cytosol increased with the increase of SFCCC pulp density. V was less intercepted by EPS than Ni, La, and Ce, because of lower toxicity. Experimental results in bioreactor showed that Ni, V, La, and Ce could be effectively leached by A. caldus UVS10 under 10% pulp density. The aeration and stirring operating environment in bioreactor improved the leaching efficiency of metals in SFCCC. After bioleached in bioreactor, the available fraction content of four metals in SFCCC decreased significantly. Ecological risk analysis demonstrated the environmental risks of bioleached SFCCC were significantly lower than raw SFCCC. Different reaction kinetic models were used to represent metals leaching behavior under bioleaching of A. caldus UVS10, leaching of La and Ce showed good agreement with the product layer diffusion model, while Ni and V leaching kinetics fit well with the surface chemical reaction models.

Towards the fate of antibiotics and the development of related resistance genes in stream biofilms

Antibiotics are ubiquitously found in natural surface waters and cause great harm to aquatic organisms. Stream biofilm is a complex and active community composed of algae, bacteria, fungi and other microorganisms, which mainly adheres to solid substances such as rocks and sediments. The durability and diverse structural and metabolic characteristics of biofilms make them a representative of microbial life in aquatic micrecosystems and can reflect major ecosystem processes. Microorganisms and extracellular polymeric substances in biofilms can adsorb and actively accumulate antibiotics. Therefore, biofilms are excellent biological indicators for detecting antibiotic in polluted aquatic environments, but the biotransformation potential of stream biofilms for antibiotics has not been fully explored in the aquatic environment. The characteristics of stream biofilm, such as high abundance and activity of bacterial community, wide contact area with pollutants, etc., which increases the opportunity of biotransformation of antibiotics in biofilm and contribute to bioremediation to improve ecosystem health. Recent studies have demonstrated that both exposure to high and sub-minimum inhibitory concentrations of antibiotics may drive the development of antibiotic resistance genes (ARGs) in natural stream biofilms, which are susceptible to the effects of antibiotic residues, microbial communities and mobile genetic elements, etc. On the basis of peer-reviewed papers, this review explores the distribution behavior of antibiotics in stream biofilms and the contribution of biofilms to the acquisition and spread of antibiotic resistance. Considering that antibiotics and ARGs alter the structure and ecological functions of natural microbial communities and pose a threat to river organisms and human health, our research findings provide comprehensive insights into the migration, transformation, and bioavailability of antibiotics in biofilms.

EDTA-enhanced alkaline anaerobic fermentation of landfill leachate-derived waste activated sludge for short-chain fatty acids production: Metals chelation and EPSs destruction

Alkaline anaerobic fermentation (AAF) of waste activated sludge (WAS) has been demonstrated to be promising for short-chain fatty acids (SCFAs) recovery. However, high-strength metals and EPSs in the landfill leachate-derived WAS (LL-WAS) would stabilize its structure, suppressing AAF performance. To improve sludge solubilization and SCFAs production, AAF was coupled with EDTA addition for LL-WAS treatment. The results show that sludge solubilization at AAF-EDTA was promoted by 62.8% than AAF, releasing 21.8% more soluble COD. The maximal SCFAs production of 477.4 mg COD/g VSS was thus achieved, i.e., 1.21 and 6.13 times those at AAF and the control, respectively. SCFAs composition was also improved with more acetic and propionic acids (80.8% versus 64.3%). Metals bridging EPSs were chelated by EDTA, which significantly dissolved metals from sludge matrix (e.g., 23.28 times higher soluble Ca than AAF). EPSs tightly bound with microbial cells were thus destructed (e.g., 4.72 times more protein release than alkaline treatment), causing an easier sludge disruption and subsequently a higher SCFAs production by hydroxide ions. These findings suggest an effective EDTA-supported AAF for metals and EPSs-rich WAS to recover carbon source.

Alternative microbial-based functional ingredient source for lycopene, beta-carotene, and polyunsaturated fatty acids

The acquisition of carotenoids and polyunsaturated fatty acids (PUFAs) from plants and animals for use as functional ingredients raises concerns regarding productivity and cost; utilization of microorganisms as alternative sources is an option. We proposed to evaluate the production of carotenoids and PUFAs by Rhodopseudomonas faecalis PA2 using different vegetable oils (rice bran oil, palm oil, coconut oil, and soybean oil) as carbon source, different concentrations of yeast extract as nitrogen source at different cultivation time to ensure the best production. Cultivation with soybean oil as source of carbon led to the most significant changes in the fatty acid profile. Compared to the initial condition, the strain cultivated in the optimal conditions (4% soybean oil, 0.35% yeast extract, and 14 days of incubation) showed an increase in μ_max, biomass, carotenoid productivity, and microbial lipids by 102.5%, 52.7%, 33.82%, and 34.78%, respectively. The unsaturated fatty acids content was raised with additional types of PUFAs; omega-3 [alpha-linolenic acid and eicosapentaenoic acid] and omega-6 [linoleic acid and eicosatrienoic acid] fatty acids were identified. The results of ultra high-performance liquid chromatography-electrospray ionization-quadrupole time of flight-mass spectrometry (UHPLC-ESI-QTOF-MS/MS) indicated the molecular formula and mass of bacterial metabolites were identical to those of lycopene and beta-carotene. The untargeted metabolomics revealed functional lipids and several physiologically bioactive compounds. The outcome provides scientific reference regarding carotenoids, PUFAs, and useful metabolites that have not yet been reported in the species Rhodopseudomonas faecalis for further use as a microbial-based functional ingredient.

Production and transformation of organic matter driven by algal blooms in a shallow lake: Role of sediments

The generation of organic matter (OM) occurs synchronously with phytoplankton growth. Characterization of the generated particulate and dissolved OM during algal blooms in eutrophic lakes is crucial for better understanding the carbon cycle but remains limited. We speculate that sediments play a critical role in the biogeochemical transformation of OM derived from algal blooms in shallow lakes. In this study, changes in OM quantity and quality and the concentrations of biogenic elements (nutrients and metals) during algal blooms, were studied in situ in a shallow eutrophic lake (Lake Chaohu, China). Two enclosure treatments in the presence and absence of sediments were compared, and the cause-effect relationships among sediment, nutrients, metals, phytoplankton, particulate OM (POM), and dissolved OM (DOM) were revealed by a partial least square-path model (PLS-PM). The results showed that the changes in nutrients and metals concentrations over time were consistent with that of chlorophyll a (Chl a), and at the end of the treatment, the concentrations of Chl a, nutrients, and metals in Treatment S (with sediments) were approximately 3-5 times of those in Treatment N (without sediments). The high concentration of Chl a in Treatment S resulted in a high quantity of POM, which showed low molecular weight, low humification, and was enriched in protein-like components (∼ 70%). For DOM, the quantity increased after the decrease in POM, and DOM quality showed a significantly higher abundance of humic-like components and a higher molecular weight than POM did. The PLS-PM results showed that the significant positive effects of sediment on nutrients, metals, phytoplankton, POM, and DOM were 0.28, 0.37, 0.28, 0.25, and 0.25, respectively, suggesting that sediment had an important role in the biogeochemical cycles of these substances. The significant negative relationship between POM and DOM (-0.62) and the distinct difference in POM and DOM quality implied the efficient transformation of the freshly generated OM to those with a higher molecular weight, higher humification, and potentially refractory. Our results depicted the quick biogeochemical transformation of nutrients, metals, and the potential formation of refractory organic carbon in water column, as driven by the couple of the algae pump with the microbial carbon pump.

Interrelating EPS, soluble microbial products and metal solubility in a methanogenic consortium stressed by nickel and cobalt

The relationships between extracellular polymeric substances (EPS), soluble microbial product production, metal solubility, and methanogenic activity were investigated. The individual, and joint, toxic effects of nickel and cobalt on methanogenic consortia fed with glucose as model substrate were studied using biomethane potential assays. Cobalt was found to be less toxic to methanogens than nickel at each concentration tested, and the combined effects of Ni and Co on methane production in the bimetal experiment was higher than the sum of the effects of each metal alone. The protein content of EPS, and extracellular soluble protein fractions, decreased with increasing concentrations of total metals. Meanwhile, no significant change in response to metal stress was apparent for carbohydrate content of EPS or extracellular soluble carbohydrate. Decreasing protein content of EPS was accompanied by reduced methanogenic activity and an increase in the soluble metal fraction. The strong associations observed between these variables could be due to the critical role of EPS in protecting microbial cells against nickel and cobalt stress, possibly by capturing metal cations through their functional groups, thus reducing metal availability to the microbial cells in the methanogenic consortia underpinning the anaerobic digestion process.

Microorganism-derived biological macromolecules for tissue engineering

According to literature, certain microorganism productions mediate biological effects. However, their beneficial characteristics remain unclear. Nowadays, scientists concentrate on obtaining natural materials from live creatures as new sources to produce innovative smart biomaterials for increasing tissue reconstruction in tissue engineering and regenerative medicine. The present review aims to introduce microorganism-derived biological macromolecules, such as pullulan, alginate, dextran, curdlan, and hyaluronic acid, and their available sources for tissue engineering. Growing evidence indicates that these materials can be used as biological material in scaffolds to enhance regeneration in damaged tissues and contribute to cosmetic and dermatological applications. These natural-based materials are attractive in pharmaceutical, regenerative medicine, and biomedical applications. This study provides a detailed overview of natural-based biomaterials, their chemical and physical properties, and new directions for future research and therapeutic applications.

Differences in the properties of extracellular polymeric substances responsible for PAH degradation isolated from Mycobacterium gilvum SN12 grown on pyrene and benzo[a]pyrene

This study aimed to evaluate the differences in the characteristics of extracellular polymeric substances (EPSs) secreted by Mycobacterium gilvum SN12 (M.g. SN12) cultured on pyrene (Pyr) and benzo[a]pyrene (BaP). A heating method was used to extract EPSs from M.g. SN12, and the composition, emulsifying activity, and morphology of EPS extracts were investigated. Results showed that EPS extracts varied significantly with Pyr or BaP addition to the bacterial cultures. The concentration of proteins and carbohydrates, the main components of the EPS extracts, first increased and then decreased, with an increase in the concentration of Pyr (0-120 mg L^-1) and BaP (0-120 mg L^-1). A similar trend was observed for the emulsifying activity of the EPS extracts. EPSs extracted from all cultures exhibited a compact structure with a smooth surface, except for EPSs extracted from BaP-grown M.g. SN12, which revealed a more fragile and softer surface. These findings suggest that Pyr and BaP had different influences on the properties of isolated EPSs, providing insights into the mechanism underlying polycyclic aromatic hydrocarbons (PAHs) biodegradation by some EPS-secreting bacteria. To the best of our knowledge, this is the first report on the texture profile of EPS samples extracted from M.g. SN12 grown on PAHs.

Recent Advances in the Production of Exopolysaccharide (EPS) from Lactobacillus spp. and Its Application in the Food Industry: A Review

Exopolysaccharide (EPS) show remarkable properties in various food applications. In this review paper, EPS composition, structural characterization, biosynthesis pathways, and recent advancements in the context of application of EPS-producing Lactobacillus spp. in different food industries are discussed. Various chemical and physical properties of Lactobacillus EPS, such as the structural, rheological, and shelf-life enhancement of different food products, are mentioned. Moreover, EPSs play a characteristic role in starter culture techniques, yogurt production, immunomodulation, and potential prebiotics. It has been seen that the wastes of fermented and non-fermented products are used as biological food for EPS extraction. The main capabilities of probiotics are the use of EPS for technological properties such as texture and flavor enhancement, juiciness, and water holding capacities of specific food products. For these reasons, EPSs are used in functional and fermented food products to enhance the healthy activity of the human digestive system as well as for the benefit of the food industry to lower product damage and increase consumer demand. Additionally, some pseudocereals such as amaranth and quinoa that produce EPS also play an important role in improving the organoleptic properties of food-grade products. In conclusion, more attention should be given to sustainable extraction techniques of LAB EPS to enhance structural and functional use in the developmental process of food products to meet consumer preferences.

Nano- and Macroscale Imaging of Cholesterol Linoleate and Human Beta Defensin 2-Induced Changes in Pseudomonas aeruginosa Biofilms

The biofilm production of Pseudomonas aeruginosa (PA) is central to establishing chronic infection in the airways in cystic fibrosis. Epithelial cells secrete an array of innate immune factors, including antimicrobial proteins and lipids, such as human beta defensin 2 (HBD2) and cholesteryl lineolate (CL), respectively, to combat colonization by pathogens. We have recently shown that HBD2 inhibits biofilm production by PA, possibly linked to interference with the transport of biofilm precursors. Considering that both HBD2 and CL are increased in airway fluids during infection, we hypothesized that CL synergizes with HBD2 in biofilm inhibition. CL was formulated in phospholipid-based liposomes (CL-PL). As measured by atomic force microscopy of single bacteria, CL-PL alone and in combination with HBD2 significantly increased bacterial surface roughness. Additionally, extracellular structures emanated from untreated bacterial cells, but not from cells treated with CL-PL and HBD2 alone and in combination. Crystal violet staining of the biofilm revealed that CL-PL combined with HBD2 effected a significant decrease of biofilm mass and increased the number of larger biofilm particles consistent with altered cohesion of formed biofilms. These data suggest that CL and HBD2 affect PA biofilm formation at the single cell and community-wide level and that the community-wide effects of CL are enhanced by HBD2. This research may inform future novel treatments for recalcitrant infections in the airways of CF patients.

Insight into biosorption of heavy metals by extracellular polymer substances and the improvement of the efficacy: a review

Heavy metals are continuously released into aquatic environments in which they accumulate. This phenomenon endangers public health because heavy metals accumulate along the food chain. However, conventional remediation methods are inefficient, expensive and yield toxic intermediate products, which adversely affect the environment. The discovery of green bio-adsorbents such as microbial extracellular polymer substance (EPS) has quickly attracted considerable worldwide attention because of their low cost, high removal efficiency of heavy metals and industrial availability. Hence, this review considers the sources, hazards and treatment methods of heavy metals pollution, particularly the biosorption mechanism of EPS to heavy metals and the influencing factors of the bio-adsorption process, which are significant in the efficient removal of heavy metals-containing wastewater treatment. This review also focuses on strengthening the process of EPS adsorption of heavy metals, which can further contribute to heavy metals removal. Finally, it has been proposed that improving the yield, stability, selectivity and recoverability of EPS is the key direction of further research.

Bacterial Extracellular Polymers: A Review

Prokaryotic microbial cells especially bacteria are highly emphases for their exopolysaccharides (EPS) production. EPS are the higher molecular weight natural extracellular compounds observe at the surface of the bacterial cells. Nowadays bacterial EPS represent rapidly emerging as new and industrially important biomaterials because it having tremendous physical and chemical properties with novel functionality. Due to its industrial demand as well as research studies the different extraction processes have been discovered to remove the EPS from the microbial biofilm. The novelties of EPS are also based on the microbial habitat conditions such as higher temperature, lower temperature, acidic, alkaliphilic, saline, etc. Based on its chemical structure they can be homopolysaccharide or heteropolysaccharide. EPSs have a wide range of applications in various industries such as food, textile, pharmaceutical, heavy metal recovery, agriculture, etc. So, this review focus on the understanding of the structure, different extraction processes, biosynthesis and genetic engineering of EPS as well as their desirable biotechnological applications.

Holistic insights into extracellular polymeric substance (EPS) in anammosx bacterial matrix and the potential sustainable biopolymer recovery: A review

Anaerobic ammonia oxidation (anammox) process has been proven to be a favorable and innovative process, for treatment of nitrogen-rich wastewater due to decreased oxygen and carbon requirements at very high nitrogen loading rates. Anammox process is mainly operated through biofilm or granular sludge structures, as for such slow-growing microorganisms, elevated settling velocity of granules allows for adequate biomass retention and lowered potential risk of washouts. Stability of granular sludge biomass is extremely critical, yet the formation mechanism is poorly understood. There are number of important functions linked to Extracellular Polymeric Substance (EPS) in anammox bacterial matrix, such as; structural stability, aggregation promotion, maintenance of physical structure in the granules, water preserving and protective cell barrier. There is an increasing demand to introduce accurate methods for proper EPS extraction and characterization, to expand the perception of anammox granule stability and potential resource recovery. Analyzing EPS with a focus on various (mechanical and physical) properties can lead to biopolymer production from granular sludge. Biopolymers such as EPS are attractive alternatives substituting the conventional chemical polymers furthermore their recovery from the waste sludge and the potential applications in industrial sectors, leads to a radical enhancement of both environmental and economical sustainability, accelerating the circular economy advancements. Here, this study aims to overview the newest understanding on the structure of anammox sludge EPS, obtained recently and to assess the potential challenges and prospects to identify the knowledge gaps towards constructing an inclusive anammox EPS recovery and characterization procedure.

Alkaline and acid solubilisation of waste activated sludge

The influence of acidic and alkaline conditions on the solubilisation process of waste activated sludge (WAS) was investigated using HCl and NaOH at pH 2, 10, 11 and 12. The rise in concentration of solubilised compounds, the influence of reaction time, and the influence of the concentration of total solids (TS) during the solubilisation process were determined. Physical and chemical tests demonstrated that pre-treatment provided a release of compounds from the sludge floc matrix into the soluble fraction, characterising the solubilisation process. The highest degree of WAS solubilisation was observed when a pH of 12 was applied. Although largest effects were already attained after 0.25 h, WAS solubilisation continued reaching an increase in total dissolved solids by a factor 10.4 after 720 hrs. Under these conditions, the dissolved organic carbon (DOC), proteins, and carbohydrates resulted in releases up to 15, 40 and 41 times, respectively; phosphorus increased 5.7 times. Results indicate that by applying alkaline pre-treatment, higher TS concentrations can be treated per reactor volume compared to non-pre-treated WAS. Aerobic and anaerobic biodegradability tests showed increased bioconversion potentials in full-scale treatment plants. The respirometry tests ratify the improvement in solubilisation, with O₂ consumption rates increasing 1.4 times, concomitant with an additional 261 mg·L^-1 of the COD used, which represents 90% bioconversion of waste activated sludge. Biomethanisation test indicated an increase of 3.6 times relative to the blank.

Environmental applications of microbial extracellular polymeric substance (EPS): A review

During the last decade, water demand and wastewater generation has increased due to urbanization around the globe which had led to an increase in the utilization of chemicals/synthetic polymers for treating the wastewaters. These synthetic polymers used during the coagulation/flocculation process are non-renewable, non-biodegradable, and have a potential neurotoxic and carcinogenic effect. From the literature it is clear that extracellular polymer substance (EPS) is a potential bioflocculant, moreover it is renewable, biodegradable, eco-friendly, non-toxic as well as economically valued product. The various identification techniques and extraction methods of EPS are elaborated. Further application of EPS as absorbent in removing the dye from the industrial effluent is presented. Moreover EPS as a potential adsorbent for heavy metal removal from the various effluent is discussed. In addition, EPS is also utilized for soil remediation and soil erosion control. Mainly, EPS as bioflocculant in treating raw water, wastewater treatment, leachate and sludge management are summarized in this review.

Single-phase and two-phase cultivations using different light regimes to improve production of valuable substances in the anoxygenic photosynthetic bacterium Rhodopseudomonas faecalis PA2

This study aimed to improve biomass, carotenoid, bacteriochlorophyll, protein, lipid, and carbohydrate contents of Rhodopseudomonas faecalis PA2 using different light regimes. Light intensity (4000, 6000, 8000, and 10,000 lx), together with photoperiod (24:0, 16:8, 12:12, and 8:16 h light/dark), was assigned as single-phase (SP) cultivation while two-phase (TP) cultivation used two light intensities (using 4000 lx as the first phase), together with the control of phase shift (3, 6, and 9 days) and photoperiod. Biomass, carotenoid, and bacteriochlorophyll contents were maximized by SP cultivation; light at 8000 lx with light-dark cycle of 24:0 was optimal for pigments synthesis. In contrast, TP was useful to enhance storage compounds; protein, lipid, and carbohydrate productivities were significantly increased by 121.69%, 101.69%, and 92.44%, respectively, in TP when compared with SP. This indicates that the novel light strategy proposed in this study was able to manipulate the production of valuable substances in this strain.

Energy-saving preparation of a bioflocculant under high-salt condition by using strain Bacillus sp. and the interaction mechanism towards heavy metals

A highly efficient bioflocculant, i.e., Na-Bsp was successfully prepared by using a tolerant strain-Bacillus sp. under high-salt condition without sterilization. Salt-containing medium was not infected by other strains throughout the whole incubation period in 168 h. The as-prepared Na-Bsp was found to be cation-dependent, exhibiting high flocculant efficiency (FE) i.e., 97.69 ± 0.61%, towards kaolin particles by aid of Fe³⁺. High FE values were well maintained under a wide pH range and/or boiled water treatment, likely because of the main constituent of polysaccharide. The presence of hydroxyl, carboxyl, and amine groups on the bioflocculant surface were possibly responsible for strong interactions with heavy metals. The adsorption capacities of Pb²⁺, Cu²⁺ and Cr⁶⁺ were 1000.0, 434.8 and 384.6 mg g^-1, respectively. The changing of structure and configuration of bioflocculant during the metal adsorption were explored by the scanning electron microscope with electron energy loss spectroscopy and three-dimensional excitation-emission fluorescence spectrometry. This study provided a novel production method, whereby the conventional sterilization could be avoided, which is of great environmental significance for steam-saving. Furthermore, the as-prepared Na-Bsp exhibited high adsorption capacities toward heavy metals, which sheds lights on its potential usage as an alternative adsorbent.

Enhanced technology based for sewage sludge deep dewatering: A critical review

Sludge is an inevitable by product of sewage treatment, and it includes pathogens, heavy metals, organic pollutants and other toxic substances. The components of sludge are complex and variable with extracellular polymeric substances (EPS) being one. EPS are highly hydrophilic and compressible, and make sludge dewatering difficult. Therefore, the development of efficient sludge-dewatering technology is an important means of mitigating rapid sludge growth. At present, the main methods used for sludge deep-dewatering technology are chemical preconditioning with high-pressure filtration and electrical mechanical dewatering. The selection of chemical preconditioning directly determines the final efficiency of the sludge-dewatering process. In this paper, we conduct a comprehensive review of the problems related to sludge dewatering and systematically summarise the impact of different chemical conditioning technologies on the efficiency of sludge dewatering. Furthermore, the characteristics of different enhanced dewatering technologies are evaluated and analysed for their adaptability and final disposal methods. We believe that this review can clarify the chemical conditioner mechanism to improve sludge dewatering, provide reference debugging information for the sludge-dewatering process and promote the development of efficient and environmentally friendly sludge-dewatering technology.

Effects of revetments on soil denitrifying communities in the urban river-riparian interface

The river-riparian interface plays an important role in removal of nitrogen pollution. Many revetments have been built in urban riparian zones, which has affected soil denitrification function of river-riparian interface. However, the impacts of revetments on denitrifying communities of soil in the river-riparian interface are still unclear. In this study, in the case of eliminating the influence of plants, three modes of revetments (No Revetments (NR), Impervious Masonry Revetments (IR), and Permeable Concrete Imitation Pile Revetments (PR)) were employed to determine the influence of revetments on denitrifying communities of soil among three distances from revetments (1.0, 0.6 and 0.3 m). It was shown in comparison with IR and NR, PR promoted the abundance, diversity and relative abundance of major strains in nirS and nirK denitrifying bacteria (P < 0.05), but these effects decreased as distances increased. Compared with the IR (2.95 ± 1.15 × 10⁵ copies g^-1) and NR (4.13 ± 2.14 × 10⁵ copies g^-1), abundances of nirK denitrifying bacteria adjacent to PR (6.19 ± 1.89 × 10⁵ copies g^-1) were significantly higher (P < 0.05). Rubrivivax and Bradyrhizobium were the dominant bacterial genera, accounting for 16.02-23.94% and 29.25%-38.25% of nirS- and nirK- denitrifying bacteria, respectively. SOC and nitrogen availability were the primary factors which influence the gene richness of nirK and nirS, while soil bulk density, sand content and WFPS as the major elements were impacting compositions of nirK and nirS communities. The results will improve the comprehension of theoretical process of denitrification affected by revetment types.

Synergistic effect of biofilm growth and cadmium adsorption via compositional changes of extracellular matrix in montmorillonite system

The interaction of bacterial biofilm and clay minerals provides great potential for heavy metal remediation in contaminated soil, yet, little is known about how heavy metal, clay minerals and their combinations affect the bacterial biofilm performance and heavy metal adsorption. In this study, the response of biofilm development as well as Cd²⁺ adsorption in the presence of Cd²⁺ and montmorillonite has been deciphered. Low concentrations of Cd²⁺ and montmorillonite or their combinations enhanced biofilm formation by increasing polysaccharides proportion in the biofilm matrix, and the maximum adsorption capacity of Cd²⁺ by biofilm was increased by 1.5 times. Furthermore, the immobilization of Cd²⁺ by soil was significantly improved when S14-biofilm was introduced. Such results could gain deeper insight into bacterial survival tactics in the complex systems which makes major contribution to microbial remediation of heavy metal polluted environments.

Characterization of the biofilm matrix composition of psychrotrophic, meat spoilage pseudomonads

Psychrotrophic Pseudomonas species are the key spoilage bacteria of aerobically stored chilled meat. These organisms readily form biofilms on meat under refrigerated conditions leading to consumer rejection and associated economic losses. Limited information is available on the matrix composition of the biofilms formed by these bacteria. We quantified and characterized the main components of the matrix of mono-species biofilms of selected Pseudomonas fragi and Pseudomonas lundensis strains using chemical analysis and Raman spectroscopy. The biofilms were grown at 10 °C and 25 °C on nitro-cellulose membranes placed on surface sterilized beef cuts. Extra-cellular polymeric substances of the matrix were extracted in soluble and bound forms and were chemically assessed for total carbohydrates, proteins and extra-cellular DNA. Both Pseudomonas species showed a significant increase in total carbohydrates and total proteins when grown at 10 °C as compared to 25 °C. Extra-cellular DNA did not show a strong correlation with growth temperature. Raman spectra were obtained from planktonic bacteria and membrane grown biofilms at 10 °C and 25 °C. Higher levels of guanine were detected in planktonic cells as compared to biofilm cells. This study suggests that psychrotrophic Pseudomonas species may respond to cold stress by increasing extra-cellular polymer secretions.

Exploring the inhibition boundaries of mixed cultures of purple phototrophic bacteria for wastewater treatment in anaerobic conditions

The development of novel wastewater platforms should include the analysis of the most critical functional factors including the effects of toxic or inhibitory substances. Due to the novelty of purple phototrophic bacteria (PPB)-based wastewater treatment systems, this analysis has not been done yet in mixed cultures. In this work, various relevant chemical compounds, including aromatic (phenol, 2,4,6-trichlorophenol or 246TCP, 4-nitrophenol or 4CP, sulfathiazole) and aliphatic organics (methanol, trichlorethylene or TCE, oleic acid, ethanol, propionic acid), inorganic salts (ammonium, ClO₃^-, Na⁺), and metals (Fe³⁺, Fe²⁺, Cu²⁺, Zn²⁺, Ni²⁺, Al³⁺), as well as pH, are analyzed for their effect on mixed PPB cultures in anaerobic photoheterotrophic conditions using acetate as the model organic substrate. The most toxic substances detected were 246TCP, 4NP, Cu²⁺, Fe²⁺ and Ni²⁺, (K_i for activity: 23 ± 2, 97 ± 12, 3.1 ± 0.4, 13 ± 3, 13 ± 1 mg/L, and K_i (or toxicity threshold) for growth: 17 ± 2, (119), 3.5 ± 0.4, (4.8), (22.9) mg/L, respectively). Some substances inhibited the activity more than the growth (sulfathiazole, Ni²⁺ and Fe³⁺), or the growth more than the activity (TCE, 4NP and Fe²⁺). In addition, some organic substrates, such as phenol, ethanol and propionate, specifically inhibited the acetate uptake, being noncompetitive in the case of phenol and ethanol, and most likely competitive in the case of propionate. These findings are relevant for the wastewater treatment and resource recovery applications of the PPB technology, as well as for the upgrading of current models (Photo-Anaerobic Model). In addition, the data will open possibilities to promote the production of specific compounds (as PHA or single-cell proteins) by selectively inhibiting some parts of the PPB metabolism.

Critical review on dewatering of sewage sludge: Influential mechanism, conditioning technologies and implications to sludge re-utilizations

Sewage sludge (mainly composed of excessive bio-sludge) is an inevitable by-product of biological wastewater treatment process and contains various toxic substances, such as pathogens, heavy metals, and organic contaminants. The production of sewage sludge may cause serious pollution risks without appropriate disposals. As the essential step of sludge treatment, dewatering plays significant roles in minimizing the sludge volume, facilitating the transportation, increasing the calorific value and even reducing the leachate production in landfill sites. This paper presents a comprehensive review on the issues related to dewatering of sewage sludge. Section 1 starts with the environmental implications of sludge dewatering. Section 2 deals with the concepts and challenges about differentiation of bound water fractions, and also reviews the recent progress of in-situ visualization of water occurrence states in bio-flocs. Section 3 discusses about how various physiochemical properties influence the sludge dewaterability, and the insufficiency in in-situ micro-characterization of sludge constituents is pointed out. Section 4 reviews the existing conditioning technologies for sludge dewaterability improvement, and the advantages/disadvantages of each technology in terms of applicable occasions, material consumption, energy consumption and environmental impacts are evaluated. The last section (section 5) specifically analyzes the feasibility of integrating sludge dewatering and re-utilization, and raises attention to the potential environmental risks of dewatering conditioning. Based on the above discussion, we propose that a unified theory for sludge dewaterability improvement remains to be established. Especially, how the molecular structures of sludge compositions affect the solid-water interface behavior requires to be deepened, which will further unravel the mechanism behind strong water-holding capacities of bio-flocs. Additionally, we believe that the key challenges for sludge dewatering is how to select the appropriate conditioning technique according to the physiochemical properties of target sludge. The reliable indicators for real-time control of conditioning operations are still deficient, e.g., dynamic dosage control of conditioning chemicals. Accordingly, the potential environmental risks of excessive conditioning chemicals should be taken into more consideration.

Granule-based immobilization and activity enhancement of anammox biomass via PVA/CS and PVA/CS/Fe gel beads

Granule-based immobilization of anammox biomass assisted by polyvinyl alcohol/chitosan (PVA/CS) and PVA/CS/Fe gel beads was studied, via the operation of three identical up-flow reactors (R1 without gel beads, R2 with PVA/CS, R3 with PVA/CS/Fe) for 203 days. In the end, the nitrogen removal rates (NRR) were 5.3 ± 0.4, 10.0 ± 0.3 and 13.9 ± 0.5 kg-N m^-3 d^-1 for R1, R2 and R3, respectively. The porous PVA/CS and PVA/CS/Fe created a suitable eco-niche for anammox bacteria to grow and attach, thus being retained in the reactor. The EPS entangles newly grown cells within the gel beads, resulting in compact aggregation. The interaction between Fe ions added to PVA/CS/Fe gel beads and negatively charged EPS groups strongly promoted granule strength and compactness. The immobilization method proposed by this study was found to effectively improve biomass retention in the reactors, which is promising for advanced anammox process applications.

The guanidine thiocyanate-high EDTA method for total microbial RNA extraction from severely heavy metal-contaminated soils

Molecular analyses relying on RNA, as a direct way to unravel active microbes and their functional genes, have received increasing attention from environmental researchers recently. However, extracting sufficient and high‐quality total microbial RNA from seriously heavy metal‐contaminated soils is still a challenge. In this study, the guanidine thiocyanate‐high EDTA (GTHE) method was established and optimized for recovering high quantity and quality of RNA from long‐term heavy metal‐contaminated soils. Due to the low microbial biomass in the soils, we combined multiple strong denaturants and intense mechanical lysis to break cells for increasing RNA yields. To minimize RNAase and heavy metals interference on RNA integrity, the concentrations of guanidine thiocyanate and EDTA were increased from 0.5 to 0.625 ml g⁻¹ soil and 10 to 100 mM, respectively. This optimized GTHE method was applied to seven severely contaminated soils, and the RNA recovery efficiencies were 2.80 ~ 59.41 μg g⁻¹ soil. The total microbial RNA of non‐Cr(VI) (NT) and Cr(VI)‐treated (CT) samples was utilized for molecular analyses. The result of qRT‐PCR demonstrated that the expressions of two tested genes, chrA and yieF, were respectively upregulated 4.12‐ and 62.43‐fold after Cr(VI) treatment. The total microbial RNA extracted from NT and CT samples, respectively, reached to 26.70 μg and 30.75 μg, which were much higher than the required amount (5 μg) for metatranscriptomic library construction. Besides, ratios of mRNA read were more than 86%, which indicated the high‐quality libraries constructed for metatranscriptomic analysis. In summary, the GTHE method is useful to study microbes of contaminated habitats.

Micro-interfacial mechanisms on sludge dewaterability enhancement using cerium chloride for preparation of carbon-based functional material

In this work, sludge conditioning efficiency of cerium chloride (CeCl₃) in combination with organic polymers was evaluated, the floc microstructure and extracellular polymeric substances (EPS) properties under flocculation conditioning were analyzed. The interaction mechanisms between EPS and Ce(III) were systematically investigated through two-dimension correlation spectroscopy, X-ray photoelectron spectroscopy, and confocal laser scanning microscopy. In addition, the adsorption and catalytic abilities of Ce-sludge based carbon (SBC) in tetracycline (TC) removal were evaluated. The results showed that CeCl₃ conditioning performed well in improving sludge dewaterability, and CeCl₃ and cationic polyacrylamide showed a synergistic effect in sludge conditioning. Contents of EPS decreased as the dosage of CeCl₃ increased because of charge neutralization and complexation reactions. 2D-UV-FTIR heterospectral correlation spectroscopy analysis suggested the reaction activity of EPS to Ce(III) followed the order of humic acid > protein > polysaccharide. The decrease of α-helix content improved the hydrophobicity of proteins in EPS, which was responsible for sludge dewaterability improvement in CeCl₃ conditioning. Besides, the SBC was prepared with CeCl₃ conditioned sludge for treating water containing TC. Ce-SBC had a dual function of adsorption and Fenton-like activity. This work provides a sludge recycling process that coupled chemical conditioning to pyrolysis carbonization to prepare functional carbon-based materials.

Optimizing sludge dewatering with a combined conditioner of Fenton's reagent and cationic surfactant

Enhancing sludge dewatering is of importance in reducing environmental burden and disposal costs. In this work, a cationic surfactant, cetyl trimethyl ammonium bromide (CTAB), was combined with Fenton's reagent for sludge dewatering. Results show that the Fenton-CTAB conditioning significantly promotes the sludge dewatering. Using combined techniques of response surface methodology and uniform design, dosages of Fe²⁺, H₂O₂, and CTAB for water content response were optimized to be 89, 276, and 233 mg/g dry solids (DS), respectively. The water content of sludge decreased from 79.0% to 66.8% under the optimal conditions. Compared with cationic polyacrylamide, the Fenton-CTAB system exhibited superior sludge dewatering performance. To gain insights into the mechanisms involved in sludge dewatering, the effects of Fenton-CTAB conditioning on the composition of extracellular polymeric substances (EPS) and the morphology of the sludge flocs were investigated. The decomposition of EPS into some dissolved organics and the release of proteins in tightly bound EPS facilitated the conversion of bound water to free water and further reduced the water content of sludge cake. After conditioning, morphology of sludge showed aggregation. Overall, the enhanced sludge dewatering by Fenton-CTAB treatment provides an efficient way for management of sewage sludge.

Recycling of sugar industry wastewater for single-cell protein production with supplemental carotenoids

The bioconversion of sugar-industry wastewater to value-added products is a prominent topic in biotechnology. This work cultured a carotenoid-producing photosynthetic bacterium, Rhodopseudomonas faecalis, in a photo-bioreactor containing different wastewater from wastewater treatment ponds of a Thai sugar company. The cultivated R. faecalis produced single cell protein (SCP) with supplemental carotenoids. The cultivation boosted the growth and dehydrogenase activity of R. faecalis from all wastewater sources, while significantly reducing the total sugar concentration. The cellular protein concentration and carotenoid production of R. faecalis was maximised in wastewater collected from anaerobic pond and secondary mechanically aerated pond, respectively. At the end of the cultivation, the chemical oxygen demand was reduced by 80% and the protein content in the dry biomass exceeded 50%, within the acceptable ranges of SCP production. The biomass contained all essential amino acids and the leucine and lysine proportions were above the SCP guideline values. This study reveals that sugar-industry wastewater can be recycled in SCP production with supplemental carotenoids. The SCP is a potential commercial product for the sugar industry.

Insights into the production of extracellular polymeric substances of Cupriavidus pauculus 1490 under the stimulation of heavy metal ions

Three different methods (a sulfuric acid method, sodium chloride method and vibration method) were used to extract extracellular polymeric substances (EPS) from Cupriavidus pauculus 1490 (C. pauculus 1490) in the present study. The sodium chloride method was able to extract the maximum amount of EPS (86.15 ± 1.50 mg g⁻¹-DW), and could ensure minimum cell lysis by detecting glucose-6-phosphate dehydrogenase activity and using scanning electron microscopy. This method was therefore selected as the optimal extraction method and used in subsequent experiments. On this basis, the tolerance of C. pauculus 1490 and variations in EPS secretion after the addition of different metal ions was investigated. The tolerance levels of C. pauculus 1490 to Cd(ii), Ni(ii), Cu(ii) and Co(ii) were 300 mg L⁻¹, 400 mg L⁻¹, 400 mg L⁻¹ and 400 mg L⁻¹, respectively. Low concentrations of these heavy metal ions could promote bacterial growth, while increased concentrations were found to inhibit it. The results show that metal ions, especially Cd(ii), stimulate the secretion of EPS, with an EPS yield reaching 956.12 ± 10.59 mg g⁻¹-DW at 100 mg L⁻¹. Real-time polymerase chain reaction (PCR) analysis showed that the key EPS synthetic genes, epsB, epsP and Wzz, were up-regulated. Fourier transform infrared spectroscopy analysis suggested that abundant functional groups in EPS play an important role in heavy metal ion complexation. These results will contribute to our understanding of the tolerance mechanism of microorganisms in the presence of different types and concentrations of metal ions.

Metal ions are shown to stimulate the secretion of EPS components of Cupriavidus pauculus 1490, especially Cd(II).

A new strategy on biomining of low grade base-metal sulfide tailings

This study investigated the effect of designed microbial consortia on biomining of low grade base-metal sulfide tailings. The results show the amount of recycled metals were equal if the tailings were leached by mixed cultures of Leptospirillum ferriphilum and Acidithiobacillus thiooxidans at three different ratios or by pure culture of L. ferriphilum, which was better than the pure culture of Acidithiobacillus ferrooxidans. qPCR (quantitative polymerase chain reaction) demonstrated only L. ferriphilum functioned in the mixtures at initial stage. The results of extracellular polymeric substances (EPS) via three-dimensional excitation-emission matrix combined with parallel factor analysis (3DEEM-PARAFAC) collected from mixed or pure cultures indicated there were no interactions between two strains. Secondary minerals were formed, but did not influence the leaching process. A new strategy for tailings biomining was proposed: only ferrous oxidizers should be added during the initial and middle biomining stage, while sulfur oxidizers should be added at the end.

Role of extracellular polymeric substance (EPS) in toxicity response of soil bacteria Bacillus sp. S3 to multiple heavy metals

Heavy metal resistant bacteria are of great interest because of their potential use in bioremediation. Understanding the survival and adaptive strategies of these bacteria under heavy metal stress is important for better utilization of these bacteria in remediation. The objective of this study was to investigate the role of bacterial extracellular polymeric substance (EPS) in detoxifying against different heavy metals in Bacillus sp. S3, a new hyper antimony-oxidizing bacterium previously isolated from contaminated mine soils. The results showed that Bacillus sp. S3 is a multi-metal resistant bacterial strain, especially to Sb(III), Cu(II) and Cr(VI). Toxic Cd(II), Cr(VI) and Cu(II) could stimulate the secretion of EPS in Bacillus sp. S3, significantly enhancing the adsorption and detoxification capacity of heavy metals. Both Fourier transform infrared spectroscopy (FTIR) and three-dimensional excitation-emission matrix (3D-EEM) analysis further confirmed that proteins were the main compounds of EPS for metal binding. In contrast, the EPS production was not induced under Sb(III) stress. Furthermore, the TEM-EDX micrograph showed that Bacillus sp. S3 strain preferentially transported the Sb(III) to the inside of the cell rather than adsorbed it on the extracellular surface, indicating intracellular detoxification rather than extracellular EPS precipitation played an important role in microbial resistance towards Sb(III). Together, our study suggests that the toxicity response of EPS to heavy metals is associated with difference in EPS properties, metal types and corresponding environmental conditions, which is likely to contribute to microbial-mediated remediation.

Microbial action and mechanisms for Cr(VI) removal performance by layered double hydroxide modified zeolite and quartz sand in constructed wetlands

This study was conducted to evaluate the performance underlying the removal of hexavalent chromium Cr(VI) associated with Zn-layered double hydroxides (Zn-LDHs)-modified substrates utilized in simulated constructed wetlands (CWs) from a microbial perspective. To accomplish this, Zn-LDHs-modified substrates (zeolite and quartz sand (QS)) were synthesized at various Zn²⁺/Al³⁺ and Fe³⁺ molar ratios by co-precipitation under alkaline conditions. The experimental group was then compared with a control group to determine the microbial action responsible for Cr(VI) removal during the Cr(VI) removal experiments. The removal experiment revealed that the average Cr(VI) removal rates of the Zn-LDHs-modified substrates were superior to those of natural substrates. Subsequent evaluation of the microbial structure by Illumina high-throughput sequencing revealed that the relative abundance of Novosphingobium, Brevundimonas, Methylophilus, and Acidovorax related to Cr(VI) removal was relatively high in Zn-LDHs-modified substrates. Moreover, the extracellular polymeric substance (EPS) content was significantly influenced by the Zn-LDHs coating according to the relative microbial experiments. Similar trends were observed in enzyme activity. Taken together, these findings illustrated that the Zn-LDHs coating had a significant impact on microbial action, and the Cr(VI) removal efficiency of the Zn-LDHs-modified QS (zeolite) substrate was better than that of the natural substrate because of intracellular and extracellular removal mechanisms. Briefly, the microbial action of Zn-LDHs-modified QS played an important role in Cr(VI) removal, since the EPS content possessed the appropriate concentrations. Moreover, the microbial activity of ZnAl-LDHs-modified QS (zeolite) may have been higher than that of ZnFe-LDHs-modified QS (zeolite) because Al had a stronger promoting effect on Cr(VI) bio-removal than Fe. Therefore, the microbial Cr(VI) removal supported by ZnAl-LDHs-modified QS is a better choice for CWs.

Resistive Switching Memory Devices Based on Body Fluid of Bombyx mori L

Resistive switching memory devices are strong candidates for next-generation data storage devices. Biological memristors made from renewable natural biomaterials are very promising due to their biocompatibility, biodegradability, and ecological benignity. In this study, a nonvolatile memristor was fabricated using the body fluid of Bombyx mori as the dielectric layer. The developed Al/Bombyx mori body fluid film/indium tin oxide (ITO) biomemristor exhibited bipolar resistive switching characteristics with a maximum on/off current ratio greater than 10⁴. The device showed a retention time of more than 1 × 10⁴ s without any signs of deterioration, thus proving its good stability and reliability. The resistive switching behavior of the Al/Bombyx mori body fluid film/ITO biological memristor is driven by the formation and breakage of conductive filaments formed by the migration of oxygen ions. This study confirms that Bombyx mori body fluid, a 100% natural, inexpensive, and abundant material, is a potential candidate as a nonvolatile biomemristor material with broad application prospects.

Production of single cell protein from manure as animal feed by using photosynthetic bacteria

To reduce the cost of protein feedstock for animal feed, the use of single cell protein (SCP) produced from waste of animal agriculture is an interesting choice. This study reveals that chicken manure was the best substrate for SCP production by submerged fermentation using photosynthetic bacteria compared to swine, cow, and buffalo manure. Regression analysis showed that the productions were found to be significantly influenced by chicken manure content, inoculum size, and cultivation time. Response surface methodology based on central composite design generated the optimal condition (15% chicken manure, 30% inoculum size and cultivation time for 14 days) at which biomass, protein, and carotenoid productions were increased by 92.3%, 21.6%, and 18.2%, respectively. The percentage of error between the predicted and actual values for biomass, protein, and carotenoid productions were 1.56%, 2.64%, and 2.09%, respectively, which indicates the precision of the model. To verify the quality of SCP, the bacterium was cultured in a photobioreactor to investigate amino acid composition, protein, and nucleic acid contents. The SCP yielded 62.7% protein with essential amino acids including lysine, methionine, threonine, phenylalanine, leucine, isoleucine, valine, histidine, and low nucleic acid content of 4.52%. This study suggests an alternative SCP production for animal feed as well as the strategy for animal waste management.

Extraction and characterization of extracellular polymeric substances from a mixed fungal culture during the adaptation process with waste printed circuit boards

Extracellular polymeric substances (EPSs) extracted from fungal mycelium by four chemical methods (NaOH, H₂SO₄, formaldehyde-NaOH, glutaraldehyde-NaOH), three physical methods (heating, ultrasound, vibration), and a control method (centrifugation alone) were investigated. Results indicated formaldehyde-NaOH outperformed other methods with 186.6 ± 8.0 mg/g of polysaccharides and 23.2 ± 4.6 mg/g of protein extracted and ensured little contamination by intracellular substances. Thereafter, this method was applied in extracting EPS from a mixed fungal culture in the adaptation process with 0.5% (w/v) waste printed circuit boards (PCBs). With the four adaptation stages continuing, the culture tended to become more sensitive to respond to the external toxic environment characterized by secreting EPS more easily and quickly. The maximum amount of polysaccharides and protein could be achieved in only 3 days both at the 3rd and 4th adaptation stage. Three-dimensional excitation-emission matrix fluorescence spectrum indicated the peaks obtained for EPS were mainly associated to soluble microbial by-product-like and aromatic protein-like compounds. Transmission electron microscopic observation illustrated that although metal ions penetrated into hypha cells, parts of them could be absorbed by EPS, implying that EPS secretion may be a primary protective strategy adopted by the culture.

Responses of Acinetobacter baumannii Bound and Loose Extracellular Polymeric Substances to Hyperosmotic Agents Combined with or without Tobramycin: An Atomic Force Microscopy Study

In this work, contributions of extracellular polymeric substances (EPS) to the nanoscale mechanisms through which the multidrug-resistant Acinetobacter baumannii responds to antimicrobial and hyperosmotic treatments were investigated by atomic force microscopy. Specifically, the adhesion strengths to a control surface of silicon nitride (Si₃N₄) and the lengths of bacterial surface biopolymers of bound and loose EPS extracted from A. baumannii biofilms were quantified after individual or synergistic treatments with hyperosmotic agents (NaCl and maltodextrin) and an antibiotic (tobramycin). In the absence of any treatment, the loose EPS were significantly longer in length and higher in adhesion to Si₃N₄ than the bound EPS. When used individually, the hyperosmotic agents and tobramycin collapsed the A. baumannii bound and loose EPS. The combined treatment of maltodextrin with tobramycin collapsed only the loose EPS and did not alter the adhesion of both bound and loose EPS to Si₃N₄. In addition, the combined treatment was not as effective in collapsing the EPS molecules as when tobramycin was applied alone. Finally, the effects of treatments were dose-dependent. Altogether, our findings suggest that a sequential treatment could be effective in treating A. baumannii biofilms, in which a hyperosmotic agent is used first to collapse the EPS and limit the diffusion of nutrients into the biofilm, followed by the use of an antibiotic to kill the bacterial cells that escape from the biofilm because of starvation.

Enhancing the auto-flocculation of photosynthetic bacteria to realize biomass recovery in brewery wastewater treatment

Photosynthetic bacteria (PSB) wastewater treatment technology can simultaneously realize wastewater purification and biomass production. The produced biomass contains high value-added products, which can be used in medical and agricultural industry. However, because of the small size and high electronegativity, PSB are hard to be collected from wastewater, which hampers the commercialization of PSB-based industrial processes. Auto-flocculation is a low cost, energy saving, non-toxic biomass collection method for microbiology. In this work, the influence factors with their optimal levels and mechanism for enhancing the auto-flocculation of PSB were investigated in pure cultivation medium. Then PSB auto-flocculation performance in real brewery wastewater was probed. Results showed that Na⁺ concentration, pH and light intensity were three crucial factors except the initial inoculum sizes and temperature. In the pure medium cultivation system, the optimal condition for PSB auto-flocculation was as follows: pH was 9.5, inoculum size was 420 mg l^-1, Na⁺ concentration was 0.067 mol l^-1, light intensity was 5000 lux, temperature was 30°C. Under the optimal condition, the auto-flocculation ratio and biomass recovery reached 85.0% and 1488 mg l^-1, which improved by 1.67-fold and 2.14-fold compared with the PSB enrichment cultivation conditions, respectively. Mechanism analysis showed that the protein/polysaccharides ratio and absolute Zeta potential value had a liner relationship. For the brewery wastewater treatment, under the above optimal condition, the chemical oxygen demand removal reached 94.3% with the auto-flocculation ratio and biomass recovery of 89.6% and 1510 mg l^-1, which increased 2.75-fold and 2.77-fold, respectively.

Sludge char-to-fuel approaches based on the pyrolysis III: Adding protein without dehydration

Urban expansion has led to the accumulation of sludge, and its disposal has to meet increasingly stringent requirements. Therefore, pyrolysis has become an alternative option. However, it was still unclear which part of the sludge could be pyrolyzed to generate the product with a higher heating value, and therefore we divided sludge into extracellular polymeric substances (EPS) and cell phase and measured their heating values respectively. The obtained results showed that the high heating value (HHV) of the pyrolysis cell phase accounted for 85% of the sludge pyrolysis, and the addition of protein significantly increased the heating value of each component. Although the HHV of the pyrolysis cell phase increased by 1.8 MJ kg^-1 for every 1% increase in protein, the HHV of the pyrolysis sludge and EPS increased by only 1.2 MJ kg^-1. It is therefore suggested that EPS may contain substances that inhibit heat release. Properly increasing the cellular or protein components in the sludge could significantly increase the HHV produced by pyrolysis. Based on the measurement of fatty acids (FAs) and alcohol content and FTIR results, the addition of protein could increase the saturated FAs and accelerate the replacement of oxygen with nitrogen in the pyrolysis product, resulting in higher HHV. If the sludge was not dehydrated, more volatile compounds were carbonized and the HHV increased from 12 MJ kg^-1 to 19 MJ kg^-1. In short, since the HHV of the sludge was mainly derived from the cell phase, the HHV generation could be improved by increasing the cell phase or protein content without dehydration.

Effects of different types of extracellular polysaccharides isolated from cyanobacterial blooms on the colony formation of unicellular Microcystis aeruginosa

In this study, two types of extracellular polysaccharides (EPS), namely, mixed EPS (MX-EPS) and tightly bound EPS (TB-EPS), were extracted from cyanobacterial blooms using different methods. To evaluate their compositional differences, elemental composition, FTIR, and TG/DTA profile were measured for both EPS samples. Following that, unicellular Microcystis aeruginosa was cultured in a medium containing EPS, Ca²⁺ ion, and Mg²⁺ ion, and the effect of each type of EPS on the colony formation of M. aeruginosa was examined. Results showed that TB-EPS had more carboxy groups than MX-EPS, and that the TB-EPS medium contained Ca²⁺ and Mg²⁺ ions. These cations were not detected in the MX-EPS medium. During the colony formation experiment, colonies were observed when Ca²⁺ and Mg²⁺ ions were present at 250 mg/L concentration each. In addition, colony density increased when TB-EPS was added, compared to that of MX-EPS. Colonies were also observed in the medium containing only TB-EPS (100 mg/L), indicating that M. aeruginosa can form colonies using Ca²⁺ ion present in TB-EPS. During the MX-EPS extraction, Ca²⁺ ion chelated with EDTA was removed during ethanol precipitation. Therefore, the extraction protocol followed for TB-EPS was better than that of MX-EPS for maintaining Ca²⁺ ions, and thereby maintaining an EPS composition that enables for colony formation.