Determination of Pesticide Residues in Teas via QuEChERS Combined with Dispersive Liquid–Liquid Microextraction Followed by Gas Chromatography–Tandem Mass Spectrometry

Biosorption of cypermethrin from aqueous solutions by Pediococcus acidilactici: kinetics, isotherms, and mechanisms

BACKGROUND

Pediococcus acidilactici is an effective adsorbent for removing of pyrethroid insecticides. This study investigated the biosorption characteristics and mechanisms of P. acidilactici D15 using adsorption measurement, scanning electron microscopy, and Fourier-transform infrared spectroscopy. Isotherm and kinetic models were used to analyze the biosorption process.

RESULTS

The Langmuir isotherm model best described the cypermethrin biosorption process, with the maximum adsorption capacity of P. acidilactici D15 being 21.404 mg/g. The biosorption appeared to involve monolayer coverage with uniform forces. The pseudo-second-order model also fits well. The rate-controlling steps involved intraparticle diffusion, film diffusion and chemosorption. The main cellular components involved in cypermethrin biosorption were exopolysaccharides, spheroplast, and cell wall, especially peptidoglycan. The functional groups (-OH, -NH, -CH3, -CH2, -CH, -CONH-, -CO, and -C-O-C-) from proteins, polysaccharides, and peptidoglycan on the cell surface likely played a role in binding cypermethrin. Additionally, P. acidilactici D15 effectively reduced cypermethrin in pickle wastewater.

CONCLUSION

These findings suggest that P. acidilactici D15 could be a potential agent for reducing pesticide residues, laying the groundwork for treating pickle wastewater containing such pesticide residues. © 2024 Society of Chemical Industry.

Factors Affecting Incurred Pesticide Extraction in Cereals

This study investigated the effect of milling on the yields of incurred residues extracted from cereals. Rice, wheat, barley, and oat were soaked in nine pesticides (acetamiprid, azoxystrobin, imidacloprid, ferimzone, etofenprox, tebufenozide, clothianidin, hexaconazole, and indoxacarb), dried, milled, and passed through sieves of various sizes. The quick, easy, cheap, effective, rugged, and safe method and liquid chromatography-tandem mass spectrometry extracted and quantified the incurred pesticides, respectively. For rice and oat, the yields were higher for vortexed samples than for soaked samples. For rice, the yields improved as the extraction time increased from 1 to 5 min. The optimized method was validated based on the selectivity, limit of quantitation, linearity, accuracy, precision, and the matrix effect. For rice and barley, the average yields improved as the particle size decreased from <10 mesh to >60 mesh. For 40-60-mesh wheat and oat, all pesticides (except tebufenozide in oat) had the highest yields. For cereals, 0.5 min vortexing, 5 min extraction, and >40-mesh particle size should be used to optimize incurred pesticide extraction.

Rapid determination of 134 pesticides in tea through multi-functional filter cleanup followed by UPLC-QTOF-MS

Ensuring the safety of tea requires effective methods for the simultaneous analysis of pesticide residues in the product. A sensitive and reliable method to scan for 134 pesticide residues in tea was developed that employs a novel Multi-Functional Filter (MFF) based on d-SPE extraction and ultra-high-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry. The adsorption material was developed by porous polyvinylpolypyrrolidone (PVPP) for the removal of polyphenols. Acetonitrile extraction was passed through a syringe and then detected by UPLC-Q-TOF-MS. Method validation revealed satisfactory linearity with correlation coefficients higher than 0.985 for all pesticides. All limits of quantification were below 10 µg/kg. The matrix effects of 133 of the pesticides were nearly negligible (<20%), except for Sebutylazine (=22%). The recoveries at two spiked levels (50, 100 μg/kg) were 66.83-118.33%, and the Relative standard deviation (RSD) was lower than 20%, indicating accuracy and precision of the new method.

Automated QuEChERS for the determination of 482 pesticide residues in Radix codonopsis by GC-Q-TOF/MS and LC-Q-TOF/MS

A rapid procedure for the determination of 482 pesticide residues in Chinese Materia Medica by GC-Q-TOF/MS and LC-Q-TOF/MS (379 pesticides for LC, 327 pesticides for GC, and 226 pesticides for both) was developed. Radix codonopsis was chosen as the matrix for verification, and a comparative study on the QuEChERS sample preparation was carried out, between a fully automated workstation and manual operation, in terms of limits of quantitation, recovery rate and RSD at 3 spiked levels of 10 μg kg^-1, 20 μg kg^-1 and 100 μg kg^-1. In the linear range of each pesticide in a concentration range of 5-100 μg L^-1, the linear correlation coefficients R² of 85% of the pesticides for GC and 88% for LC were equal to or greater than 0.990. Taking recovery 70-120% and RSD ≤ 20% as the satisfactory standard, the automated workstation performed better at 10 μg kg^-1 and 20 μg kg^-1 than manual operation, and the numbers of satisfactory pesticides of GC & LC were 401 and 418 for the automated approach, and 378 and 400 for manual, while the two approaches were almost even at 100 μg kg^-1, 421 vs. 424. Besides, the automated workstation presented lower RSD (more pesticides ≤10%) and better recovery quality (more pesticides within 90-110%). Following the method verification, 50 Radix codonopsis samples purchased from local markets were prepared with the automated workstation and analyzed by GC and LC-Q-TOF/MS. 18 pesticides were detected in 38 samples, one of which was a highly toxic pesticide. The automated QuEChERS workstation can handle 40 samples in one cycle within 6 hours, and realize whole-process automation covering from samples after "weighing" to "injection into vials". The batch-to-batch, day-to-day, and lab-to-lab consistency and 24 × 7 workability of the automated solution have demonstrated a promising and ideal replacement for manual operation in sample preparation.

Ultrasensitive immunochromatographic strip for the detection of cyhalothrin in foods

In this study, a highly specific and sensitive monoclonal antibody (mAb) against lambda-cyhalothrin (LCT) was prepared. The half maximal inhibitory concentration (IC₅₀) in the ic-ELISA was 1.2 ng mL^-1 and the limit of detection (LOD) value was 0.2 ng mL^-1. Based on the mAb, an immunochromatographic strip (ICS) was developed to qualitatively and quantitatively detect LCT in cabbage, parsley, spinach, and green tea samples. The results from the qualitative test can be observed with the naked eye within 10 min, and from quantitative detection experiments the linear detection ranges for cabbage, parsley, spinach, and green tea samples were 2.3-122.0, 1.5-98.2, 2.1-145.5, and 6.6-129.7 ng g^-1, respectively. Furthermore, recovery experiments were carried out at three spiked concentrations of LCT (5, 20, and 80 ng g^-1), and the recoveries of the ICS in vegetable samples ranged from 81.2% to 96.7%, with a coefficient of variation (CV) of less than 8.1%. For green tea, the recoveries of the ICS were from 80.4% to 90.7%, with a CV of less than 8.7%. The ICS assay established in this study can be used for the qualitative and quantitative determination of LCT residues in foods and agricultural products.

Simultaneous determination of 14 pesticide residues in tea by multi-plug filtration cleanup combined with LC-MS/MS

A combined method of multi-plug filtration cleanup (m-PFC) and liquid chromatography-triple quadrupole mass spectrometry (LC-MS/MS) was established to simultaneously detect 14 pesticides in tea. The pesticides in water-soaked tea were extracted with acetonitrile. Cleanup of tea extract was performed using an m-PFC column packed with multiple cleanup materials: multi-walled carbon nano-tubes (MWCNTs), primary secondary amine (PSA) and anhydrous magnesium sulfate (MgSO₄). The cleanup effect of the column was evaluated based on the rates of removal of tea components that interfered with pesticide recovery, henceforth referred to as interference components. Results showed that 14 pesticides had strong linearity in the range of 5-500 μg L^-1 (r² > 0.99). The quantitative limits were within the range of 3-50 μg kg^-1. The average recoveries of 14 pesticides spiked into three different blank tea samples (green tea, black tea, oolong tea) at three levels of 0.05, 0.50 and 2.00 mg kg^-1 were in the range of 62.3-108.8% with relative standard deviations of 0.2-13.6%. The m-PFC method can greatly improve the efficiency of sample pretreatment. Furthermore, this work provides methodological guidance on how to select cleanup materials and allocate their proportions.

Application of liquid-phase microextraction to the analysis of plant and herbal samples

INTRODUCTION

The analysis of plant and herbal samples is a challenging task for analytical chemists due to the complexity of the matrix combined with the low concentration of analytes. In recent years different liquid-phase microextraction (LPME) techniques coupled with a variety of analytical equipment have been developed for the determination of both organic and inorganic analytes.

OBJECTIVE

Over the past few years, the number of research papers in this field has shown a markedly growing tendency. Therefore, the purpose of this review paper is to summarise and critically evaluate research articles focused on the application of LPME techniques for the analysis of plant and herbal samples.

RESULTS

Due to the complex nature of the samples, the direct application of LPME techniques to the analysis of plants has not often been done. LPME techniques as well as their modalities have been commonly applied in combination with other pretreatment techniques, including a solid-liquid extraction technique supported by mechanical agitation or auxiliary energies for plant analysis. Applications and the most important parameters are summarised in the tables.

CONCLUSION

This review summarises the application of the LPME procedure and shows the major benefits of LPME, such as the low volume of solvents used, high enrichment factor, simplicity of operation and wide selection of applicable detection techniques. We can expect further development of microextraction analytical methods that focus on direct sample analysis with the application of green extraction solvents while fully automating procedures for the analysis of plant materials.

Health Functions and Related Molecular Mechanisms of Tea Components: An Update Review

Tea is widely consumed all over the world. Generally, tea is divided into six categories: White, green, yellow, oolong, black, and dark teas, based on the fermentation degree. Tea contains abundant phytochemicals, such as polyphenols, pigments, polysaccharides, alkaloids, free amino acids, and saponins. However, the bioavailability of tea phytochemicals is relatively low. Thus, some novel technologies like nanotechnology have been developed to improve the bioavailability of tea bioactive components and consequently enhance the bioactivity. So far, many studies have demonstrated that tea shows various health functions, such as antioxidant, anti-inflammatory, immuno-regulatory, anticancer, cardiovascular-protective, anti-diabetic, anti-obesity, and hepato-protective effects. Moreover, it is also considered that drinking tea is safe to humans, since reports about the severe adverse effects of tea consumption are rare. In order to provide a better understanding of tea and its health potential, this review summarizes and discusses recent literature on the bioactive components, bioavailability, health functions, and safety issues of tea, with special attention paid to the related molecular mechanisms of tea health functions.

QuEChERS - Fundamentals, relevant improvements, applications and future trends

The Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) method is a simple and straightforward extraction technique involving an initial partitioning followed by an extract clean-up using dispersive solid-phase extraction (d-SPE). Originally, the QuEChERS approach was developed for recovering pesticide residues from fruits and vegetables, but rapidly gained popularity in the comprehensive isolation of analytes from different matrices. According to PubMed, since its development in 2003 up to November 2018, about 1360 papers have been published reporting QuEChERS as extraction method. Several papers have reported different improvements and modifications to the original QuEChERS protocol to ensure more efficient extractions of pH-dependent analytes and to minimize the degradation of labile analytes. This analytical approach shows several advantages over traditional extraction techniques, requiring low sample and solvent volumes, as well as less time for sample preparation. Furthermore, most of the published studies show that the QuEChERS protocol provides higher recovery rate and a better analytical performance than conventional extraction procedures. This review proposes an updated overview of the most recent developments and applications of QuEChERS beyond its original application to pesticides, mycotoxins, veterinary drugs and pharmaceuticals, forensic analysis, drugs of abuse and environmental contaminants. Their pros and cons will be discussed, considering the factors influencing the extraction efficiency. Whenever possible, the performance of the QuEChERS is compared to other extraction approaches. In addition to the evolution of this technique, changes and improvements to the original method are discussed.