Phenolic Acids from Sugarcane Bagasse Lignin: Qualitative and Quantitative Determination, Isolation, Derivatization, and Biological Activity Evaluation

Aqueous Pretreatment of Lignocellulosic Biomass for Binderless Material Production: Influence of Twin-Screw Extrusion Configuration and Liquid-to-Solid Ratio

This study was carried out to investigate the continuous aqueous pretreatment of sugarcane bagasse (SCB) through twin-screw extrusion for a new integrated full valorization, where the solid residue (extrudate) was used for the production of bio-based materials by thermocompression and the filtrate for the production of high-value-added molecules. Two configurations, with and without a filtration module, were tested and the influence of the SCB composition and structure on the properties of the materials were determined. The impact of the liquid-to-solid (L/S) ratio was studied (0.65-6.00) in relation to the material properties and the biomolecule extraction yield in the filtrate (with the filtration configuration). An L/S ratio of at least 1.25 was required to obtain a liquid filtrate, and increasing the L/S ratio to 2 increased the extraction yield to 11.5 g/kg of the inlet SCB. The extrudate obtained without filtration yielded materials with properties equivalent to those obtained with filtration for L/S ratios of at least 1.25. Since the molecule extraction process was limited, a configuration without filtration would make it possible to reduce water consumption in the process while obtaining high material properties. Under the filtration configuration, an L/S ratio of 2 was the best tradeoff between water consumption, extraction yield, and the material properties, which included 1485 kg/m3 density, 6.2 GPa flexural modulus, 51.2 MPa flexural strength, and a water absorption (WA) and thickness swelling (TS) of 37% and 44%, respectively, after 24 h of water immersion. The aqueous pretreatment by twin-screw extrusion allowed for the overall valorization of SCB, resulting in materials with significantly improved properties compared to those obtained with raw SCB due to fiber deconstruction.

Characterization of rice straw lignin phenolics and evaluation of their role in pollen tube growth in Cucurbita pepo L

Rice straw lignin was extracted via alkaline hydrolysis and structurally characterized using FT-IR and 1H NMR spectra. Ethyl acetate extract of acid solubilized lignin was found to contain p-coumaric acid, ferulic acid and caffeic acid as major phenolic acids which were isolated and characterized using spectral data. Amides of isolated phenolic acids were synthesized by their reaction with propyl and butyl amines using microwave irradiation and analysed using spectral studies. Phenolic acids and amides were evaluated for their effect on pollen germination and tube growth in pumpkin. Pollen tube length was significantly increased with N-butyl-3-(3, 4-dihydroxyphenyl) acrylamide and N-butyl-3-(4-hydroxyphenyl) acrylamide at 5 ppm concentration than the control. These results could be utilised in increasing pollen tube length of Cucurbita pepo while making interspecific cross between C. moschata and C. pepo in order to transfer hull-less character of C. pepo to virus resistant C. moschata genotypes.