Nutrient-driven algal-bacterial dynamics in semi-continuous, pilot-scale photobioreactor cultivation of Nannochloropsis salina CCMP1776 with municipal wastewater nutrients

Effect of hydraulic retention time and treated urban wastewater ratio on progressive adaptation of an inoculated microalgae in membrane photobioreactors

Currently, there is a growing concern about water scarcity. The rising demand for wastewater treatment systems that facilitate the reuse of wastewater has resulted in a focus on the use of microalgae in sustainable treatments. These methods not only eliminate nutrients from the wastewater but also produce biomass that can be used to obtain high-value products. This study aimed to observe the effect of different hydraulic retention times (HRTs) and treated urban wastewater (TUWW) percentages on the growth of microalgae biomass and nutrient consumption in membrane photobioreactors. Microalgae biomass growth increases with HRT regardless of the percentage of TUWW. Biomass concentration stabilises at between 40% and 60% TUWW but significantly increases when 100% TUWW is used, resulting in the highest biomass concentrations. As HRT increases, ammonium and total nitrogen consumption also rise. A positive trend in ammonium consumption was observed with increasing TUWW, reaching its peak with 100% TUWW. The optimal conditions for biomass growth and nutrient removal are achieved with a 7-day HRT and 100% TUWW as influent, which was confirmed as optimal with the response surface methodology.

Coupling anaerobic co-digestion of winery waste and waste activated sludge with a microalgae process: Optimization of a semi-continuous system

Wine production represents one of the most important agro-industrial sectors in Italy. Wine lees are the most significant waste in the winery industry and have high disposal and storage costs and few applications within the circular economy. In this study, anaerobic digestion and a microalgae coupled process was studied in order to treat wine lees and waste activated sludge produced within the same facility, with the aim of producing energy and valuable microalgae biomass that could be processed to recover biofuel or biostimulant. Chlorella vulgaris was cultivated on liquid digestate in a semi-continuous system without biomass recirculation. The best growth and phytoremediation performance were achieved applying a hydraulic retention time (HRT) of 20 days with a stable dry weight, lipid and protein storage of 1.85 ± 0.02 g l-1, 33.48 ± 7.54 % and 57.85 ± 10.14 % respectively. Lipid characterization highlighted the potential use in high quality biodiesel production, according to EN14214 (<12 % v/v linolenic acid). The microalgae reactor's liquid output showed high removal of ammonia (95.72 ± 2.10 %), but low organic soluble matter reduction. Further semi-continuous process optimization was carried out by increasing the time between digestate feeding and biomass recovery at HRT 10. These operative changes avoided biomass wash-out and provided a stable phytoremediation of the digestate with 84.58 ± 4.02 % ammonia removal, 33.01 ± 1.44 % sCOD removal, 38.06 ± 2.65 % of polyphenols removal.

Removal of Antibiotic Resistance Genes, Class 1 Integrase Gene and Escherichia coli Indicator Gene in a Microalgae-Based Wastewater Treatment System

Microalgae-based wastewater treatment systems (AWWTS) have recently shown promise in the mitigation of antibiotic resistance genes (ARGs) from municipal wastewater (MWW). However, due to the large number of ARGs that exist in MWW, the use of indirect conventional water quality parameters to monitor ARGs reduction in wastewater would make the process less burdensome and economically affordable. In order to establish a robust relationship between the ARGs and water quality parameters, the current study employed different microalgae strains in monoculture (CM2, KL10) and multi-species combinations (CK and WW) for the MWW treatment under outdoor environmental conditions. The studied genes were quantified in the MWW influents and effluents using real-time PCR. All the cultures substantially improved the physicochemical qualities of the MWW. Out of the 14 genes analyzed in this study, tetO, tetW, tetX and ermB were decreased beyond detection within the first 4 days of treatment in all the cultures. Other genes, including blaCTX, sul1, cmlA, aadA, int1 and uidA were also decreased beyond a 2 log reduction value (LRV). The mobile genetic element, int1, correlated positively with most of the ARGs, especially sul1 (r ≤ 0.99, p < 0.01) and aadA (r ≤ 0.97, p < 0.01). Similarly, the Escherichia coli indicator gene, uidA, correlated positively with the studied genes, especially with aadA, blaCTX, blaTEM and cmlA (r ≤ 0.99 for each, p < 0.01). Some of the studied genes also correlated positively with total dissolved solids (TDS) (r ≤ 0.98, p < 0.01), and/or negatively with total suspended solids (TSS) (r ≤ −0.98, p < 0.01) and pH (r ≤ −0.98, p < 0.01). Among the tested cultures, both monocultures, i.e., KL10 and CM2 were found to be more consistent in gene suppression than their multi-species counterparts. The findings revealed water quality parameters such as TDS, TSS and E. coli as reliable proxies for ARGs mitigation in AWWTS and further highlight the superiority of monocultures over multi-species cultures in terms of gene suppression from the MWW stream.

Quorum quenching strategy for biofouling control in membrane photobioreactor

This study aims to reduce membrane fouling in membrane photobioreactor (MPBR) through the quorum quenching (QQ) strategy. For this purpose, the QQ beads (immobilized Rhodococcus sp. BH4) were added to the MPBR, and antifouling ability was evaluated in consideration of the changes in transmembrane pressure (TMP), extracellular polymeric substance (EPS), microbial community, and cake layer morphology on the membrane surface. The results showed that the TMP of control MPBR (MPBR-C) reached 818 mbar and 912 mbar on the operation hours of 35 and 170, while the TMP of experimental MPBR (MPBR-QQ) was only 448 mbar and 676 mbar, respectively. The QQ strategy effectively reduced the EPS content in MPBR. The microscopic observations indicated that the QQ diminished the cake layer formation and pore-blocking on the membrane surface. Comparisons of 16S and 18S gene communities revealed minor differences between bacterial and eukaryotic species in MPBRs at phylum and class levels.

An integrated semi-continuous culture to treat original swine wastewater and fix carbon dioxide by an indigenous Chlorella vulgaris MBFJNU-1 in an outdoor photobioreactor

This work was the first time to evaluate the ability of an isolated Chlorella vulgaris MBFJNU-1 to remove nutrients of original swine wastewater (OSW) and fix carbon dioxide (CO₂) under outdoor conditions in a simultaneous manner using column photobioreactors. The results showed that microalga cultivated at 3% CO₂ in a batch mode achieved the highest biomass and CO₂ fixation rate. Then, a semi-continuous process for OSW treatment and CO₂ fixation simultaneously by microalga was established and the renewal rate of this process was deeply investigated. Microalga cultivated at 3% CO₂ and 80% renewal rate gave the highest productivities of total biomass, CO₂ fixation and the greatest average removal rates of total nitrogen, N-NH₄⁺, total phosphorus and chemical oxygen demand. Taken together, C. vulgaris MBFJNU-1 was the promising microalga under outdoor conditions for swine wastewater treatment and CO₂ fixation simultaneously for biofuels and biofertilizer production.

Chlorella vulgaris and Its Phycosphere in Wastewater: Microalgae-Bacteria Interactions During Nutrient Removal

Microalgae-based bioenergy production is a promising field with regard to the wide variety of algal species and metabolic potential. The use of liquid wastes as nutrient clearly improves the sustainability of microalgal biofuel production. Microalgae and bacteria have an ecological inter-kingdom relationship. This microenvironment called phycosphere has a major role in the ecosystem productivity and can be utilized both in bioremediation and biomass production. However, knowledge on the effects of indigenous bacteria on microalgal growth and the characteristics of bacterial communities associated with microalgae are limited. In this study municipal, industrial and agricultural liquid waste derivatives were used as cultivation media. Chlorella vulgaris green microalgae and its bacterial partners efficiently metabolized the carbon, nitrogen and phosphorous content available in these wastes. The read-based metagenomics approach revealed a diverse microbial composition at the start point of cultivations in the different types of liquid wastes. The relative abundance of the observed taxa significantly changed over the cultivation period. The genome-centric reconstruction of phycospheric bacteria further explained the observed correlations between the taxonomic composition and biomass yield of the various waste-based biodegradation systems. Functional profile investigation of the reconstructed microbes revealed a variety of relevant biological processes like organic acid oxidation and vitamin B synthesis. Thus, liquid wastes were shown to serve as valuable resources of nutrients as well as of growth promoting bacteria enabling increased microalgal biomass production.

Toward enhanced performance of integrated photo-bioelectrochemical systems: Taxa and functions in bacteria-algae communities

An integrated photo-bioelectrochemical (IPB) system uses microalgae in the cathode of a microbial fuel cell to achieve higher electricity generation and nutrient removal from wastewater. Using multivariate analysis and surveys of IPB studies, this paper identifies key algal and bacterial taxa and discusses their functions critical for IPB performance. Unicellular algae with high photosynthetic oxygen production and biofilm formation can enhance IPB energy production. Diverse bacterial taxa achieve nitrogen transformations and can improve total nitrogen removal. Understanding bacteria-algae interactions via quorum sensing in the IPB cathode may potentially aid in boosting system performance. Future advances in development of IPBs for wastewater treatment will benefit from interdisciplinary collaboration in analysis of microbial community functions.

Effects of bacterial inoculation and nitrogen loading on bacterial-algal consortium composition and functions in an integrated photobioelectrochemical system

An integrated photo-bioelectrochemical system (IPB) for wastewater treatment combines a microbial fuel cell with an algal bioreactor, eliminating requirements for aeration, promoting electricity generation, remediating nutrients and producing algal biomass for conversion into biofuel or other bioproducts. To examine strategies for improving IPB functions of electrochemical output and nutrient removal efficiency, this study tested effects of cathode bacterial inoculation and nitrogen loading on cathode microbial community and IPB performance. IPB cathodes were inoculated with the green alga Chlorella vulgaris, in combination with nitrite-oxidizing bacteria (NOB) Nitrobacter winogradskyi, and/or ammonium-oxidizing bacteria (AOB) Nitrosomonas europaea. IPB performance was examined before and after nitrifying bacteria inoculations and under three ammonium loading concentrations in the wastewater medium. Bacterial communities in the cathode suspension and biofilm were examined by 16S rRNA gene sequence analysis. Relative to the algae only control, cathode inoculation with NOB and/or AOB improved net nutrient removal, but resulted in reduced dissolved oxygen availability, which impaired electricity generation. Higher ammonium loading increased electricity production and nutrient removal, possibly by overcoming algal-bacterial competition. Inoculation with nitrifying bacteria resulted in minor changes to total bacterial composition and AOB or NOB comprised <3% of total sequences after 1 month. Community composition changed more dramatically following increase in ammonium-N concentration from 40 to 80 mg L^-1. Manipulation of N loading could be a useful strategy to improve IPB performance, while inoculation of AOB or NOB may be beneficial for treatment of water with high ammonium loading when N removal is the primary system goal.