Recyclable magnetic nanoparticles grafted with antimicrobial metallopolymer-antibiotic bioconjugates

Resonance-Based Sensing of Magnetic Nanoparticles Using Microfluidic Devices with Ferromagnetic Antidot Nanostructures

We demonstrated resonance-based detection of magnetic nanoparticles employing novel designs based upon planar (on-chip) microresonators that may serve as alternatives to conventional magnetoresistive magnetic nanoparticle detectors. We detected 130 nm sized magnetic nanoparticle clusters immobilized on sensor surfaces after flowing through PDMS microfluidic channels molded using a 3D printed mold. Two detection schemes were investigated: (i) indirect detection incorporating ferromagnetic antidot nanostructures within microresonators, and (ii) direct detection of nanoparticles without an antidot lattice. Using scheme (i), magnetic nanoparticles noticeably downshifted the resonance fields of an antidot nanostructure by up to 207 G. In a similar antidot device in which nanoparticles were introduced via droplets rather than a microfluidic channel, the largest shift was only 44 G with a sensitivity of 7.57 G/ng. This indicated that introduction of the nanoparticles via microfluidics results in stronger responses from the ferromagnetic resonances. The results for both devices demonstrated that ferromagnetic antidot nanostructures incorporated within planar microresonators can detect nanoparticles captured from dispersions. Using detection scheme (ii), without the antidot array, we observed a strong resonance within the nanoparticles. The resonance's strength suggests that direct detection is more sensitive to magnetic nanoparticles than indirect detection using a nanostructure, in addition to being much simpler.

Membrane-Active Metallopolymers: Repurposing and Rehabilitating Antibiotics to Gram-Negative Superbugs

Among multiple approaches to combating antimicrobial resistance, a combination therapy of existing antibiotics with bacterial membrane-perturbing agents is promising. A viable platform of metallopolymers as adjuvants in combination with traditional antibiotics is reported in this work to combat both planktonic and stationary cells of Gram-negative superbugs and their biofilms. Antibacterial efficacy, toxicity, antibiofilm activity, bacterial resistance propensity, and mechanisms of action of metallopolymer-antibiotic combinations are investigated. These metallopolymers exhibit 4-16-fold potentiation of antibiotics against Gram-negative bacteria with negligible toxicity toward mammalian cells. More importantly, the lead combinations (polymer-ceftazidime and polymer-rifampicin) eradicate preformed biofilms of MDR E. coli and P. aeruginosa, respectively. Further, β-lactamase inhibition, outer membrane permeabilization, and membrane depolarization demonstrate synergy of these adjuvants with different antibiotics. Moreover, the membrane-active metallopolymers enable the antibiotics to circumvent bacterial resistance development. Altogether, the results indicate that such non-antibiotic adjuvants bear the promise to revitalize the efficacy of existing antibiotics to tackle Gram-negative bacterial infections.

Facial amphiphilic naphthoic acid-derived antimicrobial polymers against multi-drug resistant gram-negative bacteria and biofilms

Inspired by the facial amphiphilic nature and antimicrobial efficacy of many antimicrobial peptides, this work reported facial amphiphilic bicyclic naphthoic acid derivatives with different ratios of charges to rings that were installed onto side chains of poly(glycidyl methacrylate). Six quaternary ammonium-charged (QAC) polymers were prepared to investigate the structure-activity relationship. These QAC polymers displayed potent antibacterial activity against various multi-drug resistant (MDR) gram-negative pathogens such as Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae, and Acinetobacter baumannii. Polymers demonstrated low hemolysis and high antimicrobial selectivity. Additionally, they were able to eradicate established biofilms and kill metabolically inactive dormant cells. The membrane permeabilization and depolarization results indicated a mechanism of action through membrane disruption. Two lead polymers showed no resistance from MDR-P. aeruginosa and MDR-K. pneumoniae. These facial amphiphiles are potentially a new class of potent antimicrobial agents to tackle the antimicrobial resistance for both planktonic and biofilm-related infections.

Facially Amphiphilic Bile Acid-Functionalized Antimicrobials: Combating Pathogenic Bacteria, Fungi, and Their Biofilms

We report facially amphiphilic bile acid-based antimicrobials with a broad spectrum of activity against both bacterial and fungal pathogens and negligible detrimental effects on mammalian cells. Two lead compounds eliminated dormant subpopulations of various bacterial species, unlike conventional antibiotics. The lead compounds were also effective in eradicating biofilms of methicillin-resistant Staphylococcus aureus (MRSA), Pseudomonas aeruginosa, and Candida albicans. Additionally, these compounds substantially inhibited the formation of fungal biofilms (C. albicans). Mechanistic investigations revealed the membrane-active nature and endogenous reactive oxygen species (ROS) induction ability of these compounds. Finally, no detectable resistance was developed by the bacterial strains against this class of membrane-targeting antimicrobials.

In-vivo processing of nanoassemblies: a neglected framework for recycling to bypass nanotoxicological therapeutics

The proof-of-concept of nanomaterials (NMs) in the fields of imaging, diagnosis, treatment, and theranostics shows the importance in biopharmaceuticals development due to structural orientation, on-targeting, and long-term stability. However, biotransformation of NMs and their modified form in human body via recyclable techniques are not explored owing to tiny structures and cytotoxic effects. Recycling of NMs offers advantages of dose reduction, re-utilization of the administered therapeutics providing secondary release, and decrease in nanotoxicity in human body. Therefore, approaches like in-vivo re-processing and bio-recycling are essential to overcome nanocargo system-associated toxicities such as hepatotoxicity, nephrotoxicity, neurotoxicity, and lung toxicity. After 3-5 stages of recycling process of some NMs of gold, lipid, iron oxide, polymer, silver, and graphene in spleen, kidney, and Kupffer's cells retain biological efficiency in the body. Thus, substantial attention towards recyclability and reusability of NMs for sustainable development necessitates further advancement in healthcare for effective therapy. This review article outlines biotransformation of engineered NMs as a valuable source of drug carriers and biocatalyst with critical strategies like pH modification, flocculation, or magnetization for recovery of NMs in the body. Furthermore, this article summarizes the challenges of recycled NMs and advances in integrated technologies such as artificial intelligence, machine learning, in-silico assay, etc. Therefore, potential contribution of NM's life-cycle in the recovery of nanosystems for futuristic developments require consideration in site-specific delivery, reduction of dose, remodeling in breast cancer therapy, wound healing action, antibacterial effect, and for bioremediation to develop ideal nanotherapeutics.

Biodegradable polycaprolactone metallopolymer-antibiotic bioconjugates containing phenylboronic acid and cobaltocenium for antimicrobial application

This paper reports antimicrobial metallopolymers containing biodegradable polycaprolactone as the backbone with boronic acid and cobaltocenium as the side chain. While boronic acid promotes interactions with bacterial cells via boronolectin with lipopolysaccharides, cationic cobaltocenium facilitates the unique complexation with anionic β-lactam antibiotics. The synergistic interactions in these metallopolymer-antibiotic bioconjugates were evidenced by re-sensitized efficacy of penicillin-G against four different Gram-negative bacteria (E. coli, P. vulgaris, P. aeruginosa and K. pneumoniae). The degradability of the polyester backbone was validated through tests under physiological pH (7.4) and acidic pH (5.5) or under enzymatic conditions. These metallopolymers exhibited time-dependent uptake and reduction of cobalt metals in different organs of mice via in vivo absorption, distribution, metabolism, and excretion (ADME) tests.

Macromolecular Nanotherapeutics and Antibiotic Adjuvants to Tackle Bacterial and Fungal Infections

The escalating rise in the population of multidrug-resistant (MDR) pathogens coupled with their biofilm forming ability has struck the global health as nightmare. Alongwith the threat of aforementioned menace, the sluggish development of new antibiotics and the continuous deterioration of the antibiotic pipeline has stimulated the scientific community toward the search of smart and innovative alternatives. In near future, membrane targeting antimicrobial polymers, inspired from antimicrobial peptides, can stand out significantly to combat against the MDR superbugs. Many of these amphiphilic polymers can form nanoaggregates through self-assembly with superior and selective antimicrobial efficacy. Additionally, these macromolecular nanoaggregrates can be utilized to engineer smart antibiotic-delivery system for on-demand drug-release, exploiting the infection site's micoenvironment. This strategy substantially increases the local concentration of antibiotics and reduces the associated off-target toxicity. Furthermore, amphiphilc macromolecules can be utilized to rejuvinate obsolete antibiotics to tackle the drug-resistant infections. This review article highlights the recent developments in macromolecular architecture to design numerous nanostructures with broad-spectrum antimicrobial activity, their application in fabricating smart drug delivery systems and their efficacy as antibiotic adjuvants to circumvent antimicrobial resistance. Finally, the current challenges and future prospects are briefly discussed for further exploration and their practical application in clinical settings.

Synthesis and antibacterial activity of polymer-antibiotic conjugates incorporated into a resin-based dental adhesive

This work reports on polymer-antibiotic conjugates (PACs) as additives to resin-based restorative dental materials as a new strategy to convey sustained antibacterial character to these materials. Such antibacterial performance is expected to improve their longevity in the oral cavity. Using the previously reported ciprofloxacin (Cip)-based PAC as a control, a penicillin V (PV)-based PAC was investigated. The monomer-antibiotic conjugate (MAC) containing a methacrylate monomer group and a PV moiety was prepared via nucleophilic substitution between 2-chloroethyl methacrylate (CEMA) and penicillin V potassium (PVK). The PV-based PAC was synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization of the MAC with hydroxyethyl methacrylate (HEMA), and further characterized by 1H NMR and gel permeation chromatography (GPC) analysis. Antibiotic resistance was investigated by passaging bacteria in low concentrations of the antibiotic for 19 days, followed by a 48 h challenge at higher concentrations. Our results suggest that the development of antibiotic resistance is unlikely. Zone of inhibition (ZOI) assays revealed no clearing zones around PV-containing resins indicating minimal antibiotic leakage from the material. Similarly, MTT assay demonstrated that the antibiotic-containing specimens did not release cytotoxic byproducts that may inhibit human gingival fibroblast growth. Counting of colony-forming units in an S. mutans biofilm model was used to assess bacterial survival at baseline and after subjecting the antibiotic-containing resin specimens to an enzymatic challenge for 30 days. Significantly reduced bacterial counts were observed as the biofilm aged from 24 to 72 h, and salivary enzymatic exposure did not reduce the antibacterial efficacy of the discs, suggesting that PV-resin will be effective in reducing the re-incidence of dental caries.

Synthetic Antimicrobial Polymers in Combination Therapy: Tackling Antibiotic Resistance

Antibiotic resistance is a critical global healthcare issue that urgently needs new effective solutions. While small molecule antibiotics have been safeguarding us for nearly a century since the discovery of penicillin by Alexander Fleming, the emergence of a new class of antimicrobials in the form of synthetic antimicrobial polymers, which was driven by the advances in controlled polymerization techniques and the desire to mimic naturally occurring antimicrobial peptides, could play a key role in fighting multidrug resistant bacteria in the near future. By harnessing the ability to control chemical and structural properties of polymers almost at will, synthetic antimicrobial polymers can be strategically utilized in combination therapy with various antimicrobial coagents in different formats to yield more potent (synergistic) outcomes. In this review, we present a short summary of the different combination therapies involving synthetic antimicrobial polymers, focusing on their combinations with nitric oxide, antibiotics, essential oils, and metal- and carbon-based inorganics.

Facile In-Situ Fabrication of a Ternary ZnO/TiO2/Ag Nanocomposite for Enhanced Bactericidal and Biocompatibility Properties

This paper presents for the first time a successful fabrication of ternary ZnO/TiO2/Ag nanocomposites consisting of zinc oxide (ZnO), titania (TiO2) and silver (Ag) nanoparticles (NPs) synthesised using Morinda citrifolia fruit (MCF) extract. ZnONPs were synthesised using the co-precipitation method, and TiO2 and Ag were introduced into the precursor solutions under microwave irradiation to obtain ZnO/TiO2/Ag nanocomposites (NCs). This material demonstrated enhanced bactericidal effect towards bacterial pathogens compared to that of the binary TiO2/Ag, Ag and TiO2 alone. In vitro cytotoxicity results of the as-synthesised ZnO/TiO2/AgNCs on RAW 264.7 macrophages and A549 cell lines revealed a negative role in cytotoxicity, but contributed astoundingly towards antimicrobials as compared of Ag alone and binary Ag/TiO2. This study shows that the resultant ternary metal/bi-semiconductor nanocomposites may provide a therapeutic strategy for the eradication of bacterial pathogens without affecting the healthy mammalian cells.

Enhanced antimicrobial and full-thickness wound healing efficiency of hydrogels loaded with heparinized ZnO nanoparticles: In vitro and in vivo evaluation

Nanotechnology-based fabricated wound dressings are known as appropriate substrates to enhance healing in both acute and chronic wounds. These types of materials have the ability to deliver therapeutic agents. In this study, a wound dressing including heparinized zinc oxide nanoparticles in combination with chitosan and poly(vinyl alcohol) was developed to investigate its antibacterial and regenerative properties in a rat model of full thickness skin wounds. By adding nanoparticles, the mechanical strength increased up to twice as compared to the sample without nanoparticles. In addition, heparin release profile follows the Hixson-Crowell release kinetic. Protein adsorption enhanced by adding nanoparticles in hydrogels and the prepared wound dressings were completely biocompatible. In terms of antibacterial activity, the minimum inhibitory concentration decreased by conjugation of heparin on the surface of zinc oxide nanoparticles compared to the non-functionalized nanoparticles, and, this shows the increased antibacterial synergistic effect by adding heparin to nanoparticles. Furthermore, it was found that the heparinized zinc oxide nanoparticles effectively accelerate wound closure, re-epithelialization and decrease collagen deposition compared to other groups after implantation. Hence, the prepared wound dressings have the capacity to significantly enhance healing of acute wounds.

Synthesis of Well-Defined Polyolefin Grafted SiO2 Nanoparticles with Molecular Weight and Graft Density Control

Recent advances in surface-initiated polymerization have given rise to a range of brush nanocomposites and hybrid functional materials. However, the synthesis of pure polyolefin-grafted nanocomposites by surface-initiated ring-opening metathesis polymerization (SI-ROMP) is a significant challenge due to the particle aggregation and irreversible particle coupling. This study presents a synthetic approach toward well-defined poly(cyclooctene)- and polyethylene-grafted nanoparticles by tethering Grubbs third generation catalyst on the particle surface and initiating the polymerization in a rapid manner. This work also serves as a template to prepare other hairy nanoparticles and functions as a basis toward understanding their thermomechanical behaviors.

Metallo-Polyelectrolytes: Correlating Macromolecular Architectures with Properties and Applications

Since the middle of the 20th century, metallopolymers have represented a standalone subfield with a beneficial combination of functionality from inorganic metal centers and processability from the organic polymeric frameworks. Metallo-polyelectrolytes are a new class of soft materials that showcase fundamentally different properties from neutral polymers due to their intrinsically ionic behaviors. This review describes recent trends in metallo-polyelectrolytes and discusses emerging properties and challenges, as well as future directions from a perspective of macromolecular architectures. The correlations between macromolecular architectures and properties are discussed from copolymer self-assembly, metallo-enzymes for biomedical applications, metallo-peptides for catalysis, crosslinked networks, and metallogels.

Electrochemical Preparation of Synergistic Nanoantimicrobials

The rapid spreading of resistance among common bacterial pathogens towards the misused antibiotics/disinfectant agents has drawn much attention worldwide to bacterial infections. In light of this, the present work aimed at the realization of core-shell nanoparticles possessing remarkable antimicrobial properties thanks to the synergistic action of the metal core and the disinfectant shell. Copper nanoparticles stabilized by benzalkonium chloride were prepared, characterized, and implemented in poly-vinyl-methyl ketone to obtain nanoantimicrobial composite coatings. Bioactivity tests are reported, proving the excellent disinfectant properties of the proposed nanomaterials, as compared to one of the well-known and strongest silver-based nanoantimicrobials. Applications are also briefly described.

Antibacterial magnetic nanoparticles for therapeutics: a review

Along with the extensive range of exotic nanoparticle (NPs) applications, investigation of magnetic NPs (MNPs) in vitro has ushered modern antibacterial studies into an increasingly attractive research area. A great number of microorganisms exist in the size scales from nanometre to micrometre regions. The enormous potential of engineered MNPs in therapeutic procedures against various drug-resistant bacteria has declined the menace of fatal bacterial infections. Many biocompatible MNPs have been introduced that possess remarkable impacts on various bacterial strains. Conventional synthesis methods such as co-precipitation or hydrothermal techniques have been widely adopted in the production of MNPs. The MNPs for antibacterial applications are mainly required to be superparamagnetic, recyclable and biocompatible. To implement novel strategies in developing new generation antimicrobial magnetic nanomaterials, it is essential to obtain a comprehensive preview of recent achievements in synthesis, proposed antibacterial mechanisms and characterisation techniques of these nanomaterials. This review highlights notable aspects of antibacterial activity in engineered MNPs and nanocomposites including their particle properties (size, shape and saturation magnetisation), antibacterial mechanisms, synthesis methods, testing methods, surface modifications and minimum inhibitory concentrations.

Crystallization-Driven Self-Assembly of Metallo-Polyelectrolyte Block Copolymers with a Polycaprolactone Core-Forming Segment

We report crystallization-driven self-assembly (CDSA) of metallo-polyelectrolyte block copolymers that contain cationic polycobaltocenium in the corona-forming block and crystallizable polycaprolactone (PCL) as the core-forming block. Dictated by electrostatic interactions originating from the cationic metalloblock and crystallization of the PCL, these amphiphilic block copolymers self-assembled into two-dimensional platelet nanostructures in polar protic solvents. The 2D morphologies can be varied from elongated hexagons to diamonds, and their stability to fragmentation was found to be dependent on the ionic strength of the solution.

A perspective on magnetic core-shell carriers for responsive and targeted drug delivery systems

Magnetic core-shell nanocarriers have been attracting growing interest owing to their physicochemical and structural properties. The main principles of magnetic nanoparticles (MNPs) are localized treatment and stability under the effect of external magnetic fields. Furthermore, these MNPs can be coated or functionalized to gain a responsive property to a specific trigger, such as pH, heat, or even enzymes. Current investigations have been focused on the employment of this concept in cancer therapies. The evaluation of magnetic core-shell materials includes their magnetization properties, toxicity, and efficacy in drug uptake and release. This review discusses some categories of magnetic core-shell drug carriers based on Fe2O3 and Fe3O4 as the core, and different shells such as poly(lactic-co-glycolic acid), poly(vinylpyrrolidone), chitosan, silica, calcium silicate, metal, and lipids. In addition, the review addresses their recent potential applications for cancer treatment.

Gold Nanoparticles with Antibiotic-Metallopolymers toward Broad-Spectrum Antibacterial Effects

Bacterial infection has evolved into one of the most dangerous global health crises. Designing potent antimicrobial agents that can combat drug-resistant bacteria is essential for treating bacterial infections. In this paper, a strategy to graft metallopolymer-antibiotic bioconjugates on gold nanoparticles is developed as an antibacterial agent to fight against different bacterial strains. Thus, these nanoparticle conjugates combine various components in one system to display enhanced bactericidal efficacy, in which small sized nanoparticles provide high surface area for bacteria to contact, cationic metallopolymers interact with the negatively charged bacterial membranes, and the β-lactam antibiotics' sterilzation capabilities are improved via evading intracellular enzymolysis by β-lactamase. This nanoparticle-based antibiotic-metallopolymer system exhibits an excellent broad-spectrum antibacterial effect, particularly for Gram-negative bacteria, due to the synergistic effect of multicomponents on the interaction with bacteria.

Macromolecular-clustered facial amphiphilic antimicrobials

Bacterial infections and antibiotic resistance, particularly by Gram-negative pathogens, have become a global healthcare crisis. We report the design of a class of cationic antimicrobial polymers that cluster local facial amphiphilicity from repeating units to enhance interactions with bacterial membranes without requiring a globally conformational arrangement associated with highly unfavorable entropic loss. This concept of macromolecular architectures is demonstrated with a series of multicyclic natural product-based cationic polymers. We have shown that cholic acid derivatives with three charged head groups are more potent and selective than lithocholic and deoxycholic counterparts, particularly against Gram-negative bacteria. This is ascribed to the formation of true facial amphiphilicity with hydrophilic ion groups oriented on one face and hydrophobic multicyclic hydrocarbon structures on the opposite face. Such local facial amphiphilicity is clustered via a flexible macromolecular backbone in a concerted way when in contact with bacterial membranes.

Metallo-polyelectrolytes as a class of ionic macromolecules for functional materials

The fields of soft polymers and macromolecular sciences have enjoyed a unique combination of metals and organic frameworks in the name of metallopolymers or organometallic polymers. When metallopolymers carry charged groups, they form a class of metal-containing polyelectrolytes or metallo-polyelectrolytes. This review identifies the unique properties and functions of metallo-polyelectrolytes compared with conventional organo-polyelectrolytes, in the hope of shedding light on the formation of functional materials with intriguing applications and potential benefits. It concludes with a critical perspective on the challenges and hurdles for metallo-polyelectrolytes, especially experimental quantitative analysis and theoretical modeling of ionic binding.