Immobilization-free photoelectrochemical aptasensor for environmental pollutants: Design, fabrication and mechanism

A rapid and ultrasensitive cardiac troponin I aptasensor based on an ion-sensitive field-effect transistor with extended gate

Acute myocardial infarction (AMI) is a life-threatening disease with a short course and a high mortality rate. However, it is still a great challenge to achieve the on-site diagnosis of this disease within minutes, meaning there is an urgent need to develop an efficient technology for realizing the rapid diagnosis and early warning of AMI in clinical emergencies. In this study, an ultrasensitive electrochemical aptasensor based on an extended-gate ion-sensitive field-effect transistor (EGISFET) was designed to achieve the quantitative assay of cardiac troponin I (cTnI), which is a highly sensitive and specific biomarker of AMI, within only 5 min. The EGISFET exhibits extremely high detection sensitivity due to its separated structure with a large sensing area and the surface-modified Prussian blue-gold nanoparticles (PB-AuNPs) composite, which serves as a signal magnifier and DNA loading platform for good electrocatalytic ability with a large specific area. Additionally, a target-induced strand-release strategy is proposed to shorten the recognition time of cTnI using a particular DNA strand. Under optimal conditions, the as-prepared aptasensor exhibits a wide linear range of 1-1000 pg/mL, an ultralow detection limit of 0.3 pg/mL, and reliable detection results in real serum samples. It is highly anticipated that this EGISFET-based aptasensor will have broad applications in the early warning and rapid diagnosis of AMI and other acute diseases in emergency treatment.

Enhanced Label-Free Photoelectrochemical Strategy for Pollutant Detection: Using Surface Oxygen Vacancies-Enriched BiVO4 Photoanode

Label-free photoelectrochemical sensors have the advantages of high sensitivity and a simple electrode structure. However, its performance is greatly limited due to the photoactive materials' weak photoactivity and poor stability. Herein, a robust homogeneous photoelectrochemical (PEC) aptasensor has been constructed for atrazine (ATZ) based on photoetching (PE) surface oxygen vacancies (Ov)-enriched Bismuth vanadate (BiVO4) (PE-BVO). The surface of the Ov improves the carrier separation ability of BiVO4, thus providing a superior signal substrate for the sensor. A thiol molecular layer self-assembled on PE-BVO acts as a blocker, while 2D graphene acts as a signal-on probe after release from the aptamer-graphene complex. The fabricated sensor has a wide linear detection range of 0.5 pM to 10.0 nM and a low detection limit of 0.34 pM (S/N = 3) for ATZ. In addition, it can efficiently work in a wide pH range (3-13) and high ionic strength (∼6 M Na+), which provides promising opportunities for detecting environmental pollutants under complex conditions.

Herbicide detection: A review of enzyme- and cell-based biosensors

Herbicides are the most widely used class of pesticides in the world. Their intensive use raises the question of their harmfulness to the environment and human health. These pollutants need to be detected at low concentrations, especially in water samples. Commonly accepted analytical techniques (HPLC-MS, GC-MS, ELISA tests) are available, but these highly sensitive and time-consuming techniques suffer from high cost and from the need for bulky equipment, user training and sample pre-treatment. Biosensors can be used as complementary early-warning systems that are less sensitive and less selective. On the other hand, they are rapid, inexpensive, easy-to-handle and allow direct detection of the sample, on-site, without any further step other than dilution. This review focuses on enzyme- and cell- (or subcellular elements) based biosensors. Different enzymes (such as tyrosinase or peroxidase) whose activity is inhibited by herbicides are presented. Photosynthetic cells such as algae or cyanobacteria are also reported, as well as subcellular elements (thylakoids, chloroplasts). Atrazine, diuron, 2,4-D and glyphosate appear as the most frequently detected herbicides, using amperometry or optical transduction (mainly based on chlorophyll fluorescence). The recent new WSSA/HRAC classification of herbicides is also included in the review.

Immobilization-Free Photoelectrochemical Aptasensor for Atrazine Based on Bifunctional Graphene Signal Amplification and a Controllable Sulfhydryl-Assembled BiOBr/Ag NP Microinterface

Immobilization-free sensors (IFSs), with no requirement of fixing the recognition element to the electrode surface, have received increasing attention due to their unique advantages of reusable electrodes, not being limited by the load of the recognition element, and not being easily changed to the structure of the probe. In the present work, an effective visible light-driven immobilization-free photoelectric aptasensor for ultrasensitive detection of atrazine (ATZ) was proposed based on a reusable BiOBr/Ag NP substrate electrode with ultrafast charge transfer. Controllable thiols were used as conditioning agents for the photoelectric signal. The ingeniously designed bifunctional graphene can act as not only a molecular "bridge" for the ATZ aptamer through a strong π-π stacking effect, obtaining a graphene-aptamer complex, serving as a homogeneous recognition element, but also a switch for signal modulation for quantitative detection of target substances. Benefiting from the synergistic effect of the above-mentioned factors, the proposed sensor is capable of ultrasensitive and highly selective detection of ATZ in real water samples with a low detection limit of 1.2 pM and a wide linear range from 5.0 pM to 10.0 nM. Furthermore, it shows high stability, good selectivity, and strong anti-interference ability. Thus, this work has provided a fresh perspective for designing advanced immobilization-free photoelectric sensors and convenient detection of environmental pollutants.

Pesticide biosensors: trends and progresses

Pesticides, chemical substances extensively employed in agriculture to optimize crop yields, pose potential risks to human and environmental health. Consequently, regulatory frameworks are in place to restrict pesticide residue concentrations in water intended for human consumption. These regulations are implemented to safeguard consumer safety and mitigate any adverse effects on the environment and public health. Although gas chromatography- and liquid chromatography-mass spectrometry (GC-MS and LC-MS) are highly efficient techniques for pesticide quantification, their use is not suitable for real-time monitoring due to the need for sophisticated laboratory pretreatment of samples prior to analysis. Since they would enable analyte detection with selectivity and sensitivity without sample pretreatment, biosensors appear as a promising alternative. These consist of a bioreceptor allowing for specific recognition of the target and of a detection platform, which translates the biological interaction into a measurable signal. As early detection systems remain urgently needed to promptly alert and act in case of pollution, we review here the biosensors described in the literature for pesticide detection to advance their development for use in the field.

A highly sensitive and selective photoelectrochemical aptasensor for atrazine based on Au NPs/3DOM TiO2 photonic crystal electrode

A photoelectrochemical (PEC) sensing platform with high sensitivity and selectivity has been fabricated based on Au nanoparticles (Au NPs) modified three dimensionally ordered macroporous (3DOM) TiO₂ nanostructure frame for trace detection of an endocrine disrupting pesticide, atrazine (ATZ). The resultant photoanode (Au NPs/3DOM TiO₂) shows enhanced PEC performance under visible light due to multi signal amplification of the unique structure of 3DOM TiO₂ and surface plasmon resonance (SPR) of Au NPs. ATZ aptamers are used as recognition elements and immobilized on Au NPs/3DOM TiO₂ by Au-S bond in large packing density and dominant spatial orientation. The specific recognition and high binding affinity between aptamer and ATZ provides the PEC aptasensor with excellent sensitivity. The detection limit is 0.167 ng/L. Besides, this PEC aptasensor exhibits outstanding anti-interference ability in 100-fold concentration of other endocrine disrupting compounds and has been applied successfully to analyze ATZ in real water samples. A simple but efficient PEC aptasensing platform has therefore been successfully developed with high sensitivity, selectivity and repeatability for pollutant monitoring and potential risk evaluation in the environment with great application prospect.

Integration of CuS/ZnIn2S4 flower-like heterojunctions and (MnCo)Fe2O4 nanozyme for signal amplification and their application to ultrasensitive PEC aptasensing of cancer biomarker

Vascular endothelial growth factor 165 (VEGF₁₆₅) is a crucial regulator of angiogenesis and works as a major protein biomarker of cancer metastasis. Therefore, its quantitative detection is pivotal in clinic. In this work, CuS/ZnIn₂S₄ flower-like heterojunctions had strong and stable photocurrents, which behaved as photoactive material to construct a photoelectrochemical (PEC) aptasensor for detecting VEGF₁₆₅, combined by home-prepared (MnCo)Fe₂O₄ nanozyme-mediated signal amplification. The interfacial photo-induced electron transfer mechanism was chiefly discussed by UV-vis diffuse reflectance spectroscopy in details. Specifically, the (MnCo)Fe₂O₄ modified VEGF₁₆₅ aptamer was released from the PEC aptasensing platform for its highly specific affinity to target VEGF₁₆₅, which terminated the color precipitation reaction, ultimately recovering the PEC signals. The developed sensor displayed a wider linear range from 1 × 10^-2 to 1 × 10⁴ pg mL^-1 with a smaller limit of detection (LOD) of 0.1 fg mL^-1. This study provides some valuable insights for building other ultrasensitive aptasensors for clinical assays of cancer biomarkers in practice.

Advancements in nanomaterial-based aptasensors for the detection of emerging organic pollutants in environmental and biological samples

The combination of nanomaterials (NMs) and aptamers into aptasensors enables highly specific and sensitive detection of diverse pollutants. The great potential of aptasensors is recognized for the detection of diverse emerging organic pollutants (EOPs) in different environmental and biological matrices. In addition to high sensitivity and selectivity, NM-based aptasensors have many other advantages such as portability, miniaturization, facile use, and affordability. This work showcases the recent advances achieved in the design and fabrication of NM-based aptasensors for monitoring EOPs (e.g., hormones, phenolic contaminants, pesticides, and pharmaceuticals). On the basis of their sensing mechanisms, the covered aptasensing systems are classified as electrochemical, colorimetric, PEC, fluorescence, SERS, and ECL. Special attention has been paid to the fabrication processes, analytical achievements, and sensing mechanisms of NM-based aptasensors. Further, the practical utility of aptasensing approaches has also been assessed based on their basic performance metrics (e.g., detection limits, sensing ranges, and response times).

A Review on Tetrabromobisphenol A: Human Biomonitoring, Toxicity, Detection and Treatment in the Environment

Tetrabromobisphenol A (TBBPA) is a known endocrine disruptor employed in a range of consumer products and has been predominantly found in different environments through industrial processes and in human samples. In this review, we aimed to summarize published scientific evidence on human biomonitoring, toxic effects and mode of action of TBBPA in humans. Interestingly, an overview of various pretreatment methods, emerging detection methods, and treatment methods was elucidated. Studies on exposure routes in humans, a combination of detection methods, adsorbent-based treatments and degradation of TBBPA are in the preliminary phase and have several limitations. Therefore, in-depth studies on these subjects should be considered to enhance the accurate body load of non-invasive matrix, external exposure levels, optimal design of combined detection techniques, and degrading technology of TBBPA. Overall, this review will improve the scientific comprehension of TBBPA in humans as well as the environment, and the breakthrough for treating waste products containing TBBPA.

Brush-like gold nanowires-anchored g-C3N4 nanosheets with tunable geometry for ultrasensitive and regenerative SERS detection of gaseous molecules

Strapping plasmonic substrate with a reliable ability to anchor molecules and achieve reproducible result provides trustworthy opportunities for flourishing surface-enhanced Raman scattering (SERS) technique. Herein, a facile controllable in-situ anisotropic growth strategy was exploited to anchor gold nanowires (Au NWs) onto two-dimensional g-C₃N₄ nanosheets (g-C₃N₄/Au NWs), facilitating a sensitive and recyclable SERS sensor for gaseous analytes. Benefiting from the attractive enrichment effect of the brush-like surface formed by numerous small Au NWs as well as their rich nanotips-mediated enhancement capability, the hybrid substrate showed an outstanding performance in SERS-based detection of trace 4-Aminothiophenol (4-ATP) molecules, demonstrating a monitoring limitation down to 10^-8 M even in atmosphere. Satisfyingly, under visible light illumination, the efficient green photocatalytic ability derived from the g-C₃N₄ supporting matrix rendered reusable capability for the substrate, whose SERS signal was kept at a persistent high level throughout 6 cycles. Attributed to the narrow line width of SERS spectrum, the 4-ATP assay under the interference of 2-naphthalenethiol (2-NAT) was acquired in gas phase and the dependable recovery rates from 85.4 to 93.9% were confirmed as well. Thanks to the intriguing features including excellent sensitivity and recyclability, the g-C₃N₄/Au NWs substrate proposed here will pave the way toward the potential application of SERS technique in multiplexed gaseous detection.

Effective Electrochemiluminescence Aptasensor for Detection of Atrazine Residue

According to the chemiluminescence characteristics of the luminol-hydrogen peroxide (H₂O₂) system, this work designed a novel and effective electrochemiluminescence (ECL) aptasensor to detect atrazine (ATZ) rapidly. Silver nanoparticles (AgNPs) could effectively catalyze the decomposition of H₂O₂ and enhance the ECL intensity of the luminol-H₂O₂ system. Once ATZ was modified on the aptasensor, the ECL intensity was significantly weakened because of the specific combination between ATZ and its aptamer. Therefore, the changes in ECL intensity could be used to detect the concentration of ATZ. Under optimal detecting conditions, the aptasensor had a wide linear range from 1 × 10⁻³ ng/mL to 1 × 10³ ng/mL and a low limit of detection (3.3 × 10⁻⁴ ng/mL). The designed aptasensor had the advantages of good stability, reproducibility, and specificity. The aptasensor could be used to detect the ATZ content of tap water, soil, and cabbage and had satisfactory results. This work effectively constructs a novel, effective, and rapid ECL aptasensor for detecting ATZ in actual samples.

Spatially-extended 3D magnetic DNA nanodevice-based split-type photoelectrochemical strategy for sensitive and reliable miRNA detection in cancer cells

To improve the accuracy of PEC sensing. We developed a split-type “turn-off” PEC biosensor based on spatially-extended 3D magnetic DNA nanodevices with high-order DNA amplifiers for sensitive and reliable detection of miRNAs in cancer cells.

Enzyme-Free Molecularly Imprinted and Graphene-Functionalized Photoelectrochemical Sensor Platform for Pollutants

In this work, a label-free nonenzymatic photoelectrochemical (PEC) sensor is successfully developed for the detection of a typical pollutant, microcystin-LR (MC-LR), based on a visible-light-responsive alloy oxide, with highly ordered and vertically aligned Ti-Fe-O nanotubes (NTs) as substrates. Ti-Fe-O NTs consisting mainly of TiO₂ and atomically doped Fe₂O₃ are in situ prepared on a Ti-Fe alloy by electrochemical anodic oxidation. Using a simple electrochemical deposition technique, reduced graphene oxide (RGO) could be grown onto Ti-Fe-O NTs, exhibiting significant bifunctions. It not only provides an ideal microenvironment for functionalization of molecularly imprinted polymers (MIPs) on the surface but also serves as the PEC signal amplification element because of its outstanding conductivity for photons and electrons. The designed MIP/RGO/Ti-Fe-O NT PEC sensor exhibits high sensitivity toward MC-LR with a limit of detection as low as 10 pM. High selectivity toward MC-LR is also proven for the sensor. A promising detection platform not only for MC-LR but also for other pollutants has therefore been provided.

A signal-on photoelectrochemical aptasensor for chloramphenicol assay based on 3D self-supporting AgI/Ag/BiOI Z-scheme heterojunction arrays

Severe challenges are still remained for development of highly sensitive, selective and stable photoelectrochemical (PEC) sensing technology, albeit with its broad application for chloramphenicol (CAP) detection. Herein, a novel "signal-on" PEC aptasensor was fabricated based on a 3D self-supporting Z-scheme AgI/Ag/BiOI heterojunction arrays subtly integrated with in-situ formed biocatalytic precipitation (BCP) for highly sensitive and selective determination of CAP. Impressively, the HRP modified CAP aptamer (HRP-CAP aptamer) was released from the electrode by its strong affinity to the introduced CAP, and gradually terminated the BCP reaction, in turn recovering the photocurrent. By virtues of the 3D self-supporting AgI/Ag/BiOI Z-scheme heterojunction arrays and BCP signal amplification strategy, the resultant PEC sensor exhibited a wide linear range of 2-250 nM with a limit of detection (LOD) as low as 0.226 nM (S/N = 3). This work opens a new avenue for design of PEC aptasensing strategy and exhibits the marvelous potential in bioanalysis of environmental samples.

In situ monitoring of the selective adsorption mechanism of small environmental pollutant molecules on aptasensor interface by attenuated total reflection surface enhanced infrared absorption spectroscopy (ATR-SEIRAS)

In situ monitoring of the interactions and properties of pollutant molecules at the aptasensor interface is being a very hot and interesting topic in environmental analysis since its charming molecule level understanding of the mechanism of environmental biosensors. Attenuated total reflection surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) provides a unique and convenient technique for the in situ analysis, but is not easy for small molecules. Herein, an ATR-SEIRAS platform has been successfully developed to in situ monitor the selective adsorption mechanism of small pollutant molecule atrazine (ATZ) on the aptasensor interface by characteristic N‒H peak of ATZ for the first time. Based on the constructed ATR-SEIRAS platform, a thermodynamics model is established for the selective adsorption of ATZ on the aptasensor interface, described with Langmuir adsorption with a dissociation constant of 1.1 nM. The adsorption kinetics parameters are further obtained with a binding rate constant of 8.08×10⁵ M^-1 s^-1. A promising and feasible platform has therefore successfully provided for the study of the selective sensing mechanism of small pollutant molecules on biosensors interfaces, further broadening the application of ATR-SEIRAS technology in the field of small pollutant molecules.

SERS-based immunoassay and degradation of CA19-9 mediated by gold nanowires anchored magnetic-semiconductor nanocomposites

Here, straight upward Au nanowires (NWs) were successfully grown onto Fe₃O₄@TiO₂ matrix through a seed-mediated strategy to intensively improve its photocatalysis and SERS performances, facilitating a peculiar recyclable surface-enhanced Raman spectroscopy (SERS)-based immunoassay of CA19-9 in liquid form based on visible light irradiation. Such immunoassay was also supported by a smart heterobifunctional cross-linking agent-mediated probe of anti-CA19-9/4-MBA without metal nanoparticles. A low limit of detection of 5.65 × 10^-4 IUmL^-1 and a wide linear range from 1000 to 0.001 IUmL^-1 were demonstrated through repeated constructing the sandwich immunostructure with only one batch of nanocomposites. Moreover, the actual levels of CA19-9 for colorectal cancer patients were readily measured by the recyclable immunoassay, the results of which are principally consistent with the conventional CLIA detection. Thus, such a green strategy of visible light-induced recyclable immunoassay could be expected to have a potential practicability in the clinical diagnoses of cancer.

Recent Advances in Aptamer Sensors

Recently, aptamers have attracted attention in the biosensing field as signal recognition elements because of their high binding affinity toward specific targets such as proteins, cells, small molecules, and even metal ions, antibodies for which are difficult to obtain. Aptamers are single oligonucleotides generated by in vitro selection mechanisms via the systematic evolution of ligand exponential enrichment (SELEX) process. In addition to their high binding affinity, aptamers can be easily functionalized and engineered, providing several signaling modes such as colorimetric, fluorometric, and electrochemical, in what are known as aptasensors. In this review, recent advances in aptasensors as powerful biosensor probes that could be used in different fields, including environmental monitoring, clinical diagnosis, and drug monitoring, are described. Advances in aptamer-based colorimetric, fluorometric, and electrochemical aptasensing with their advantages and disadvantages are summarized and critically discussed. Additionally, future prospects are pointed out to facilitate the development of aptasensor technology for different targets.

Effects of Experimental Conditions on the Signaling Fidelity of Impedance-Based Nucleic Acid Sensors

Electrochemical impedance spectroscopy (EIS), an extremely sensitive analytical technique, is a widely used signal transduction method for the electrochemical detection of target analytes in a broad range of applications. The use of nucleic acids (aptamers) for sequence-specific or molecular detection in electrochemical biosensor development has been extensive, and the field continues to grow. Although nucleic acid-based sensors using EIS offer exceptional sensitivity, signal fidelity is often linked to the physical and chemical properties of the electrode-solution interface. Little emphasis has been placed on the stability of nucleic acid self-assembled monolayers (SAMs) over repeated voltammetric and impedimetric analyses. We have studied the stability and performance of electrochemical biosensors with mixed SAMs of varying length thiolated nucleic acids and short mercapto alcohols on gold surfaces under repeated electrochemical interrogation. This systematic study demonstrates that signal fidelity is linked to the stability of the SAM layer and nucleic acid structure and the packing density of the nucleic acid on the surface. A decrease in packing density and structural changes of nucleic acids significantly influence the signal change observed with EIS after routine voltammetric analysis. The goal of this article is to improve our understanding of the effect of multiple factors on EIS signal response and to optimize the experimental conditions for development of sensitive and reproducible sensors. Our data demonstrate a need for rigorous control experiments to ensure that the measured change in impedance is unequivocally a result of a specific interaction between the target analyte and nucleic recognition element.

Electrochemical aptasensor for exosomal proteins profiling based on DNA nanotetrahedron coupled with enzymatic signal amplification

Exosomes are extracellular nanovesicles for transferring and delivering membrane and cytosolic molecules between cells. Detection and profiling of exosomal proteins can provide direct information on disease progression, which is important to the early diagnosis and monitoring of diseases. Herein, a well-designed electrochemical aptasensor was fabricated for the profiling of cancerous exosomal proteins based on DNA nanotetrahedron (NTH) coupled with Au nanoparticles (NPs) and enzymatic signal amplification. In this assay, the aptamer modified DNA NTHs were used as the recognition and capture unit, Au NPs-DNA conjugates coupled with horseradish peroxidase were used to realize signal amplification. This aptasensor achieves a detection limit down to 1.66 × 10⁴ particles/mL for HepG2 liver cancer exosomes. In addition, the analysis of plasma-derived exosomes in HepG2 liver cancer bearing mice at different cancer stages was also achieved. More importantly, the aptasensor can be used to profile four kinds of exosomal proteins by using the corresponding aptamer. The proposed electrochemical aptasensor may be served as a potential platform for exosome detection and exosomal proteins profiling.

Ionic Current Rectification Triggered Photoelectrochemical Chiral Sensing Platform for Recognition of Amino Acid Enantiomers on Self-Standing Nanochannel Arrays

Chirality is an intrinsic and essential property of nature, and the enantiomeric discrimination of chiral molecules can provide important information leading to a better understanding of chiral recognition in biological systems and furthering the development of useful molecular devices in biochemical and pharmaceutical studies. Therefore, the exploration of new detection techniques with high accuracy and reliability for high-throughput enantioselective detection is still highly desirable. Herein, a chiral enantiomers selective recognition platform based on self-standing titanium dioxide nanochannel arrays (TiO₂ NCAs) is proposed to implement the ionic current rectification triggered photoelectrochemical (PEC) detection, which provides a novel sensing platform to discriminate chiral amino acid through synchronous output dual response signals of ionic current and photocurrent. The utilization of nanochannel arrays guaranteed the high-throughput detection, and the dual signal model avoided a "false positive" detection. In addition, based on the fabricated detection platform, various chiral substances can be facilely detected through integrating different chiral regulation units, which shed light on the construction of reliable chiral sensors for practical applications in a biological environment.

Ultrasensitive detection of amoxicillin by TiO2-g-C3N4@AuNPs impedimetric aptasensor: Fabrication, optimization, and mechanism

The trace amount of antibiotics in water can be enriched in the human body through the food chain, leading to extremely harmful effects on people's health. Therefore, it is urgent to develop new methods to detect trace pollutants in various aquatic phase. An analytical method utilizing the synergistic effect between the sensing strategy and catalytic material with high electron transfer capacity can be used to detect trace antibiotics. In this paper, an ultrasensitive impedimetric aptasensor was fabricated by the synergy between functionalized materials (TiO₂-g-C₃N₄) and gold nanoparticles (Au NPs). Due to the formation of the 'Au-S' bond between the thiol-aptamer and Au NPs, amoxicillin and the aptamer can be specifically recognized on the modified glassy carbon electrode (GCE), and the impedance signal increased rapidly. Meanwhile, the Box-Behnken Design (BBD) strategy was used to reduce the random error of the experiment, so that the prepared aptasensor has the highest sensitivity to the detection of amoxicillin. Under optimized conditions, the sensor successfully achieved the detection of amoxicillin in the ultra-low detection range (0.5-3 nM) and reached the ultra-low detection limit (0.2 nM). The detection strategy has good selectivity, reproducibility, and stability, and thus has good potential to detect amoxicillin in actual wastewater.

Advances in aptasensor technology

Aptasensors form a class of biosensors that function on the basis of a biological recognition. An aptasensor is advantageous because it incorporates a unique biologic recognition element, i.e., an aptamer, coupled to a transducer to convert a biological interaction to readable signals that can be easily processed and reported. In such biosensors, the specificity of aptamers is comparable to and sometimes even better than that of antibodies. Using the SELEX technique, aptamers with high specificity and affinity to various targets can be isolated from large pools of different oligonucleotides. Nowadays, new modifications of the SELEX technique and, as a result, easy generation and synthesis of aptamers have led to the wide application of these materials as biological receptors in biosensors. In this regard, aptamers promise a bright future. In the present research a brief account is initially provided of the recent developments in aptasensors for various targets. Then, immobilization methods, design strategies, current limitations and future directions are discussed for aptasensors.

Facile and scalable synthesis of Ti6Mn2 oxo-cluster nanocrystals with flower-like morphology and excellent photocatalytic properties

Three new phenylphosphonate (PhPO3) and salicylate (Sal) substituted heterometallic titanium-oxo clusters (ST-M), namely [Ti6Mn2O4(OEt)4(PhPO3)2(Sal)6(EtOH)2] (ST-Mn), [Ti6Zn2O4(OEt)4(PhPO3)2(Sal)6(EtOH)2(H2O)2] (ST-Zn) and [Ti6Tb2O4(OiPr)4(PhPO3)2(Sal)6Cl2(iPrOH)2]·iPrOH (ST-Tb), were synthesized. The most impressive structural feature of these compounds is the calixarene-type carboxylate endpoint in the Ti6-oxo core, which can readily capture metal ions with different radii and coordination geometries, for example, Mn2+, Zn2+ and Tb3+ ions in this case, to generate neutral mixed-metal Ti6M2-oxo clusters. Flower-like ST-Mn (denoted as FST-Mn) nanocrystals formed by nanosheets can be facilely obtained in gram-scale quantities from a simple solution reaction using Triton X-100 as a conditioning agent. The catalytic activity of these materials was evaluated by photocatalytic degradation of rhodamine B (RhB), among which FST-Mn showed the highest catalytic activity. Under visible light, 93.0% of RhB (50 ppm, 100 mL) was decomposed within 30 min catalyzed by FST-Mn without adding hydrogen peroxide, which is quite preeminent among Ti based catalysts. The catalytic decomposition efficiency under the same experimental conditions was 80.0% for ST-Mn, 24.6% for ST-Zn and 17.6% for ST-Tb. Investigation of the degradation mechanism showed that h+ and ·OH were the dominant active species in the decomposition of RhB. Moreover, the reusability and stability of FST-Mn were also verified.

In-Solution Molecular Recognition Comparison of Aptamers against the Herbicide Atrazine

Atrazine is a common herbicide that is widely used to control weed growth in both agricultural and residential settings. It has been shown to act as an endocrine disruptor that affects aquatic organisms. Rapid and low-cost monitoring methods for atrazine is the first step to mitigate its widespread persistency. Aptamers are small synthetic oligonucleotides that can assume a 3D structure to act as the molecular recognition element for a specific target of interest. Two different atrazine binding aptamers (R12.23 Trunc. and R12.45 Trunc.) have been identified from the same library design but with fundamentally different in vitro selection methodologies. While the R12.23 Trunc. has been utilized in immobilized biosensing platforms, it is unclear if in-solution-based applications would be suitable for both atrazine binding aptamers. This study provides the first insight of comparative in-solution binding profiles of the two atrazine binding aptamers. Based on our results, this information will be useful for future biosensing platform development utilizing the two aptamers.