Colloidal 2D nanosheets of MoS2 and other transition metal dichalcogenides through liquid-phase exfoliation

Recent developments in two-dimensional molybdenum disulfide-based multimodal cancer theranostics

Recent advancements in cancer research have led to the generation of innovative nanomaterials for improved diagnostic and therapeutic strategies. Despite the proven potential of two-dimensional (2D) molybdenum disulfide (MoS2) as a versatile platform in biomedical applications, few review articles have focused on MoS2-based platforms for cancer theranostics. This review aims to fill this gap by providing a comprehensive overview of the latest developments in 2D MoS2 cancer theranostics and emerging strategies in this field. This review highlights the potential applications of 2D MoS2 in single-model imaging and therapy, including fluorescence imaging, photoacoustic imaging, photothermal therapy, and catalytic therapy. This review further classifies the potential of 2D MoS2 in multimodal imaging for diagnostic and synergistic theranostic platforms. In particular, this review underscores the progress of 2D MoS2 as an integrated drug delivery system, covering a broad spectrum of therapeutic strategies from chemotherapy and gene therapy to immunotherapy and photodynamic therapy. Finally, this review discusses the current challenges and future perspectives in meeting the diverse demands of advanced cancer diagnostic and theranostic applications.

Janus and Amphiphilic MoS2 2D Sheets for Surface-Directed Orientational Assemblies toward Ex Vivo Dual Substrate Release

The two-dimensional (2-D) Janus and amphiphilic molybdenum disulfide (MoS2) nanosheet with opposite optical activities on each side (amphichiral) is synthesized by modifying sandwich-like bulk MoS2 with tannic acid and cholesterol through biphasic emulsion method. This new type of amphichiral Janus MoS2 nanosheet consists of a hydrophilic and positive optical activity tannic acid side as well as a hydrophobic and negative optical activity cholesterol side thereby characterized by circular dichroism. Surface-directed orientational differentiation assemblies are performed for the as-synthesized 2D material and are characterized by contact angle, infrared spectroscopy, X-ray photoelectron, and circular dichroism spectroscopies. The amphiphilic nature of the materials is demonstrated by the pre-organization of the nanosheets on either hydrophobic or hydrophilic surfaces, providing unprecedented properties of circular dichroism signal enhancement and wettability. Selective detachment of the surface organic groups (cholesterol and tannic acid fragments) is realized by matrix-assisted laser desorption/ionisation - time-of-flight (MALDI-TOF) mass spectrometry, and the dual substrate release in tissue is detected by ex vivo mass spectrometry imaging.

Sonocatalytic Optimization of Titanium-Based Therapeutic Nanomedicine

Recent considerable technological advances in ultrasound-based treatment modality provides a magnificent prospect for scientific communities to conquer the related diseases, which is featured with remarkable tissue penetration, non-invasive and non-thermal characteristics. As one of the critical elements that influences treatment outcomes, titanium (Ti)-based sonosensitizers with distinct physicochemical properties and exceptional sonodynamic efficiency have been applied extensively in the field of nanomedical applications. To date, a myriad of methodologies has been designed to manipulate the sonodynamic performance of titanium-involved nanomedicine and further enhance the productivity of reactive oxygen species for disease treatments. In this comprehensive review, the sonocatalytic optimization of diversified Ti-based nanoplatforms, including defect engineering, plasmon resonance modulation, heterojunction, modulating tumor microenvironment, as well as the development of synergistic therapeutic modalities is mainly focused. The state-of-the-art Ti-based nanoplatforms ranging from preparation process to the extensive medical applications are summarized and highlighted, with the goal of elaborating on future research prospects and providing a perspective on the bench-to-beside translation of these sonocatalytic optimization tactics. Furthermore, to spur further technological advancements in nanomedicine, the difficulties currently faced and the direction of sonocatalytic optimization of Ti-based therapeutic nanomedicine are proposed and outlooked.

Gum Arabic-mediated liquid exfoliation of transition metal dichalcogenides as photothermic anti-breast cancer candidates

Transition metal dichalcogenides (TMDs) have gained considerable attention for a broad range of applications, including cancer therapy. Production of TMD nanosheets using liquid exfoliation provides an inexpensive and facile route to achieve high yields. In this study, we developed TMD nanosheets using gum arabic as an exfoliating and stabilizing agent. Different types of TMDs, including MoS₂, WS₂, MoSe₂, and WSe₂ nanosheets, were produced using gum arabic and were characterized physicochemically. The developed gum arabic TMD nanosheets exhibited a remarkable photothermal absorption capacity in the near-infrared (NIR) region (808 nm and 1 W⋅cm^-2). The drug doxorubicin was loaded on the gum arabic-MoSe₂ nanosheets (Dox-G-MoSe₂), and the anticancer activity was evaluated using MDA-MB-231 cells and a water-soluble tetrazolium salt (WST-1) assay, live and dead cell assays, and flow cytometry. Dox-G-MoSe₂ significantly inhibited MDA-MB-231 cancer cell proliferation under the illumination ofan NIR laser at 808 nm. These results indicate that Dox-G-MoSe₂ is a potentially valuable biomaterial for breast cancer therapy.

Freestanding laser-induced two dimensional heterostructures for self-contained paper-based sensors

The production of 2D/2D heterostructures (HTs) with favorable electrochemical features is challenging, particularly for semiconductor transition metal dichalcogenides (TMDs). In this studies, we introduce a CO₂ laser plotter-based technology for the realization of HT films comprising reduced graphene oxide (rGO) and 2D-TMDs (MoS₂, WS₂, MoSe₂, and WSe₂) produced via water phase exfoliation. The strategy relies on the Laser-Induced production of HeterosTructures (LIHTs), where after irradiation the nanomaterials exhibit changes in the morphological and chemical structure, becoming conductive easily transferable nanostructured films. The LIHTs were characterized in detail by SEM, XPS, Raman and electrochemical analysis. The laser treatment induces the conversion of GO into conductive highly exfoliated rGO decorated with homogeneously distributed small TMD/TM-oxide nanoflakes. The freestanding LIHT films obtained were employed to build self-contained sensors onto nitrocellulose, where the HT works both as a transducer and sensing surface. The proposed nitrocellulose-sensor manufacturing process is semi-automated and reproducible, multiple HT films may be produced in the same laser treatment and the stencil-printing allows customizable design. Excellent performance in the electroanalytical detection of different molecules such as dopamine (a neurotransmitter), catechin (a flavonol), and hydrogen peroxide was demonstrated, obtaining nanomolar limits of detection and satisfactory recovery rates in biological and agrifood samples, together with high fouling resistance. Considering the robust and rapid laser-induced production of HTs and the versatility of scribing desired patterns, the proposed approach appears as a disruptive technology for the development of electrochemical devices through sustainable and accessible strategies.

Microwave-Driven Exfoliation of Bulk 2H-MoS2 after Acetonitrile Prewetting Produces Large-Area Ultrathin Flakes with Exceptionally High Yield

2D materials display exciting properties in numerous fields, but the development of applications is hindered by the low yields, high processing times, and impaired quality of current exfoliation methods. In this work we have used the excellent MW absorption properties of MoS₂ to induce a fast heating that produces the near-instantaneous evaporation of an adsorbed, low boiling point solvent. The sudden evaporation creates an internal pressure that separates the MoS₂ layers with high efficiency, and these are kept separated by the action of the dispersion solvent. Our fast method (90 s) gives high yields (47% at 0.2 mg/mL, 35% at 1 mg/mL) of highly exfoliated material (90% under 4 layers), large area (up to several μm²), and excellent quality (no significant MoO₃ detected).

Catechin versus MoS2 Nanoflakes Functionalized with Catechin: Improving the Sperm Fertilizing Ability-An In Vitro Study in a Swine Model

Nowadays, the adoption of In Vitro Fertilization (IVF) techniques is undergoing an impressive increase. In light of this, one of the most promising strategies is the novel use of non-physiological materials and naturally derived compounds for advanced sperm preparation methods. Here, sperm cells were exposed during capacitation to MoS₂/Catechin nanoflakes and catechin (CT), a flavonoid with antioxidant properties, at concentrations of 10, 1, 0.1 ppm. The results showed no significant differences in terms of sperm membrane modifications or biochemical pathways among the groups, allowing the hypothesis that MoS₂/CT nanoflakes do not induce any negative effect on the parameters evaluated related to sperm capacitation. Moreover, the addition of CT alone at a specific concentration (0.1 ppm) increased the spermatozoa fertilizing ability in an IVF assay by increasing the number of fertilized oocytes with respect to the control group. Our findings open interesting new perspectives regarding the use of catechins and new materials obtained using natural or bio compounds, which could be used to implement the current strategies for sperm capacitation.

A Thrifty Liquid-Phase Exfoliation (LPE) of MoSe2 and WSe2 Nanosheets as Channel Materials for FET Application

Two-dimensional materials are trending nowadays because of their atomic thickness, layer-dependent properties, and their fascinating application in the semiconducting industry. In this work, we have synthesized MoSe₂ and WSe₂ nanosheets (NSs) via a liquid-phase exfoliation method and investigated these NSs as channel materials in field-effect transistors (FET). The x-ray diffraction (XRD) pattern revealed that the synthesized NSs have a 2H phase with 0.65 nm d-spacing which belongs to the (002) Miller plane. Transmission electron microscopy (TEM) studies revealed that MoSe₂ and WSe₂ have a nanosheet-like structure, and the average lateral dimensions of these NSs are ~ 25 nm and ~ 63 nm, respectively. From Raman spectra, we found that the intensity of the A_1g vibrational mode decreases with the reduction in the number of layers. UV-visible spectroscopy revealed that the bandgap values of MoSe₂ and WSe₂ NSs are 1.55 eV and 1.50 eV, respectively, calculated using the Tauc equation. The output and transfer characteristics of the FET devices reveals that the fabricated FETs have good ohmic contact with the channel material and an ON/OFF current ratio of about 10² for both devices. This approach for the fabrication of FET devices can be achieved even without sophisticated fabrication facilities, and they can be applied as gas sensors and phototransistors, among other applications.

Delamination of Layered Double Hydroxide in Ionic Liquids under Ambient Conditions

Liquid phase delamination of layered materials into single- or few-layer nanosheets leads to stable nanoscale dispersions of 2D materials. The delamination of layered double hydroxide (LDH) to double hydroxide nanosheets was studied in two ionic liquids (ILs): ethylammonium nitrate (EAN) and 1-butyl-3-methylimidazolium thiocyanate (BMIMSCN). The as-prepared lamellar structure of LDH disappeared upon dispersing it in ILs due to delamination into 2D nanosheets confirmed by X-ray scattering and diffraction techniques and further evaluated by height profile assessment of the nanoparticles by atomic force microscopy. The results showed that both the thickness and lateral size of the dispersed particles decreased in the IL-based samples, indicating that cleavage of the LDH materials can be observed in addition to delamination. The findings prove the concept of delamination of layered materials by ILs under ambient conditions─an excellent way to prepare 2D double hydroxide nanosheet dispersions in one step using nonvolatile green solvents.

Graphene-Based Electrochemical Sensors for Psychoactive Drugs

Sensors developed from nanomaterials are increasingly used in a variety of fields, from simple wearable or medical sensors to be used at home to monitor health, to more complicated sensors being used by border customs or aviation industries. In recent times, nanoparticle-based sensors have begun to revolutionize drug-detection techniques, mainly due to their affordability, ease of use and portability, compared to conventional chromatography techniques. Thin graphene layers provide a significantly high surface to weight ratio compared to other nanomaterials, a characteristic that has led to the design of more sensitive and reliable sensors. The exceptional properties of graphene coupled with its potential to be tuned to target specific molecules have made graphene-based sensors one of the most popular and well-researched sensing materials of the past two decades with applications in environmental monitoring, medical diagnostics, and industries. Here, we present a review of developments in the applications of graphene-based sensors in sensing drugs such as cocaine, morphine, methamphetamine, ketamine, tramadol and so forth in the past decade. We compare graphene sensors with other sensors developed from ultrathin two-dimensional materials, such as transition-metal dichalcogenides, hexagonal boron nitrate, and MXenes, to measure drugs directly and indirectly, in various samples.

Functionalization of 2D MoS2 Nanosheets with Various Metal and Metal Oxide Nanostructures: Their Properties and Application in Electrochemical Sensors

Two-dimensional transition metal dichalcogenides (2D TMDs) have gained considerable attention due to their distinctive properties and broad range of possible applications. One of the most widely studied transition metal dichalcogenides is molybdenum disulfide (MoS₂). The 2D MoS₂ nanosheets have unique and complementary properties to those of graphene, rendering them ideal electrode materials that could potentially lead to significant benefits in many electrochemical applications. These properties include tunable bandgaps, large surface areas, relatively high electron mobilities, and good optical and catalytic characteristics. Although the use of 2D MoS₂ nanosheets offers several advantages and excellent properties, surface functionalization of 2D MoS₂ is a potential route for further enhancing their properties and adding extra functionalities to the surface of the fabricated sensor. The functionalization of the material with various metal and metal oxide nanostructures has a significant impact on its overall electrochemical performance, improving various sensing parameters, such as selectivity, sensitivity, and stability. In this review, different methods of preparing 2D-layered MoS₂ nanomaterials, followed by different surface functionalization methods of these nanomaterials, are explored and discussed. Finally, the structure-properties relationship and electrochemical sensor applications over the last ten years are discussed. Emphasis is placed on the performance of 2D MoS₂ with respect to the performance of electrochemical sensors, thereby giving new insights into this unique material and providing a foundation for researchers of different disciplines who are interested in advancing the development of MoS₂-based sensors.

Transition Metal Dichalcogenides [MX2] in Photocatalytic Water Splitting

The quest for a clean, renewable and sustainable energy future has been highly sought for by the scientific community over the last four decades. Photocatalytic water splitting is a very promising technology to proffer a solution to present day environmental pollution and energy crises by generating hydrogen fuel through a “green route” without environmental pollution. Transition metal dichalcogenides (TMDCs) have outstanding properties which make them show great potential as effective co-catalysts with photocatalytic materials such as TiO2, ZnO and CdS for photocatalytic water splitting. Integration of TMDCs with a photocatalyst such as TiO2 provides novel nanohybrid composite materials with outstanding characteristics. In this review, we present the current state of research in the application of TMDCs in photocatalytic water splitting. Three main aspects which consider their properties, advances in the synthesis routes of layered TMDCs and their composites as well as their photocatalytic performances in the water splitting reaction are discussed. Finally, we raise some challenges and perspectives in their future application as materials for water-splitting photocatalysts.

Recent progress on transition metal diselenides from formation and modification to applications

The development of graphene promotes the research of similar two-dimensional (2D) materials, especially 2D transition metal dichalcogenides (TMDCs) with semiconductor properties. Monolayer or few-layer TMDCs have several advantages, such as direct band gap, weak interlayer van der Waals force, large interlayer spacing, and abundant marginal active sites, which make them widely used in catalysis, optoelectronics, as well as energy conversion and storage devices. In addition, transition metal diselenides (TMDSs) also possess many intriguing characteristics. For instance, transition metal diselenides (e.g., MoSe₂) have a more stable 1T phase, larger interlayer spacing, smaller band gap, and more obvious metallic property of Se than TMDCs (e.g., MoS₂). Thus, it has become one of the most attractive research topics branching out from TMDCs. Herein, this review unveils the structures, synthesis, properties, modifications, applications, and perspectives for TMDSs.

The Role of Additives in Suppressing the Degradation of Liquid-Exfoliated WS2 Monolayers

Group VI transition metal dichalcogenides (TMDs) are considered to be chemically widely inert, but recent reports point toward an oxidation of monolayered sheets in ambient conditions, due to defects. To date, the degradation of monolayered TMDs is only studied on individual, substrate-supported nanosheets with varying defect type and concentration, strain, and in an inhomogeneous environment. Here, degradation kinetics of WS₂ nanosheet ensembles in the liquid phase are investigated through photoluminescence measurements, which selectively probe the monolayers. Monolayer-enriched WS₂ dispersions are produced with varying lateral sizes in the two common surfactant stabilizers sodium cholate (SC) and sodium dodecyl sulfate (SDS). Well-defined degradation kinetics are observed, which enable the determination of activation energies of the degradation and decouple photoinduced and thermal degradation. The thermal degradation is slower than the photoinduced degradation and requires higher activation energy. Using SC as surfactant, it is sufficiently suppressed. The photoinduced degradation can be widely prevented through chemical passivation achieved through the addition of cysteine which, on the one hand, coordinates to defects on the nanosheets and, on the other hand, stabilizes oxides on the surface, which shield the nanosheets from further degradation.

Facile Preparation of MoS2 Nanocomposites for Efficient Potassium-Ion Batteries by Grinding-Promoted Intercalation Exfoliation

Efficient exfoliations of bulk molybdenum disulfide (MoS₂ ) into few-layered nanosheets in pure phase are highly attractive because of the promising applications of the resulted 2D materials in diversified optoelectronic devices. Here, a new exfoliation method is presented to prepare semiconductive 2D hexagonal phase (2H phase) MoS₂ -cellulose nanocrystal (CNC) nanocomposites using grinding-promoted intercalation exfoliation (GPIE). This method with facile grinding of the bulk MoS₂ and CNC powder followed by conventional liquid-phase exfoliation in water can not only efficiently exfoliate 2H-MoS₂ nanosheets, but also produce the 2H-MoS₂ /CNC 2D nanocomposites simultaneously. Interestingly, the intercalated CNC sandwiched in MoS₂ nanosheets increases the interlayer spacing of 2H-MoS₂ , providing perfect conditions to accommodate the large-sized ions. Therefore, these nanocomposites are good anode materials of potassium-ion batteries (KIBs), showing a high reversible capacity of 203 mAh g^-1 at 200 mA g^-1 after 300 cycles, a good reversible capacity of 114 mAh g^-1 at 500 mA g^-1 , and a low decay of 0.02% per cycle over 1500 cycles. With these impressive KIB performances, this efficient GPIE method will open up a new avenue to prepare pure-phase MoS₂ and promising 2D nanocomposites for high-performance device applications.

Aqueous Adsorption of Heavy Metals on Metal Sulfide Nanomaterials: Synthesis and Application

Heavy metals pollution of aqueous solutions generates considerable concerns as they adversely impact the environment and health of humans. Among the remediation technologies, adsorption with metal sulfide nanomaterials has proven to be a promising strategy due to their cost-effective, environmentally friendly, surface modulational, and amenable properties. Their excellent adsorption characteristics are attributed to the inherently exposed sulfur atoms that interact with heavy metals through various processes. This work presents a comprehensive overview of the sequestration of heavy metals from water using metal sulfide nanomaterials. The common methods of synthesis, the structures, and the supports for metal sulfide nano-adsorbents are accentuated. The adsorption mechanisms and governing conditions and parameters are stressed. Practical heavy metal remediation application in aqueous media using metal sulfide nanomaterials is highlighted, and the existing research gaps are underscored.

Glutathione and cystamine functionalized MoS2core-shell nanoparticles for enhanced electrochemical detection of doxorubicin

Two-dimensional (2D) MoS₂core-shell nanoparticles were synthesized using an eco-friendly surface functionalization-agent with L-glutathione and cystamine (L-GSH-MoS₂-CYS) using ultrasonic frequency of 20-25 kHz. The novel modified electrode was evaluated for the electrochemical detection of doxorubicin (DOX), through cyclic and differential pulse voltammetric techniques. The electro-catalytic oxidation currents of DOX exhibited a linear relationship in the concentration ranges 0.1-78.3 and 98.3-1218 μM, with a detection limit of 31 nM. A sensitivity of 0.017μA μM^-1 cm^-2 was acquired at 0.48 V. The fabricated L-GSH-MoS₂-CYS modified electrode showed excellent precision, selectivity, repeatability, and reproducibility during the determination of DOX levels in blood serum samples. Thus, the fabricated L-GSH-MoS₂-CYS/GCE modified electrode has potential for clinical applications for optimization of chemotherapeutic drugs owing to its selectivity, ease of preparation, and long-term stability. Graphical abstract.

Impact of structure, doping and defect-engineering in 2D materials on CO2 capture and conversion

2D material based strategies for adsorption and conversion of CO2 to value-added products.

Liquid-Phase Exfoliation of Rhenium Disulfide by Solubility Parameter Matching

In this work, we provide a detailed account of the liquid-phase exfoliation (LPE) of rhenium disulfide (ReS₂), a promising new-generation two-dimensional material. By screening LPE in a wide range of solvents, we show that the most optimal solvents are characterized by similar Hildebrand or dispersive Hansen solubility parameters of 25 and 18 MPa^1/2, respectively. Such values are attained by solvents such as N-methyl-2-pyrrolidone, N,N-dimethylformamide, and 1-butanol. In line with solution thermodynamics, we interpret the conditions for high-yield exfoliation as a matching of the solvent and ReS₂ solubility parameters. Using N-methyl-2-pyrrolidone as an exemplary exfoliation solvent, we undertook a detailed analysis of the exfoliated ReS₂. In-depth morphological, structural, and elemental characterization outlined that the LPE procedure presented here produces few-layer, anisotropically stacked, and chemically pure ReS₂ platelets with long-term stability against oxidation. These results underscore the suitability of LPE to batch-produce few-layer and pristine ReS₂ in solvents that have a solubility parameter close to 25 MPa^1/2.

Enhanced and stabilized hydrogen production from methanol by ultrasmall Ni nanoclusters immobilized on defect-rich h-BN nanosheets

While transition metal-based catalysts promise lower-cost alternatives to traditional precious metals, their low activity and stability limit their deployment within industrial dehydrogenation. Here, we report the design and synthesis of ultrasmall nickel nanoclusters (∼1.5 nm) deposited on defect-rich BN nanosheet (Ni/BN) catalysts with excellent methanol dehydrogenation activity and selectivity. We found an idiosyncratic metal–support interaction not only plays a vital role in promoting the one-pot synthesis of ultrasmall Ni nanoclusters with high catalytic activity, helping to disperse and anchor the nanoclusters but also strongly enhancing the resistance to sintering and coking during methanol dehydrogenation. Calculated turnover frequency (TOF) is among the best compared with some other dehydrogenation catalysts reported previously.

Employing liquid organic hydrogen carriers (LOHCs) to transport hydrogen to where it can be utilized relies on methods of efficient chemical dehydrogenation to access this fuel. Therefore, developing effective strategies to optimize the catalytic performance of cheap transition metal-based catalysts in terms of activity and stability for dehydrogenation of LOHCs is a critical challenge. Here, we report the design and synthesis of ultrasmall nickel nanoclusters (∼1.5 nm) deposited on defect-rich boron nitride (BN) nanosheet (Ni/BN) catalysts with higher methanol dehydrogenation activity and selectivity, and greater stability than that of some other transition-metal based catalysts. The interface of the two-dimensional (2D) BN with the metal nanoparticles plays a strong role both in guiding the nucleation and growth of the catalytically active ultrasmall Ni nanoclusters, and further in stabilizing these nanoscale Ni catalysts against poisoning by interactions with the BN substrate. We provide detailed spectroscopy characterizations and density functional theory (DFT) calculations to reveal the origin of the high productivity, high selectivity, and high durability exhibited with the Ni/BN nanocatalyst and elucidate its correlation with nanocluster size and support–nanocluster interactions. This study provides insight into the role that the support material can have both regarding the size control of nanoclusters through immobilization during the nanocluster formation and also during the active catalytic process; this twofold set of insights is significant in advancing the understanding the bottom-up design of high-performance, durable catalytic systems for various catalysis needs.

Ultrasound-assisted Li+/Na+ co-intercalated exfoliation of graphite into few-layer graphene

In this work, we developed a novel approach for few-layer graphene by employing Li⁺/Na⁺ co-intercalated exfoliation assisted by ultrasound method. The experiments were conducted under the ultrasonic power of 300 W and the frequency of 40 kHz without the participation of any organic solvent. The effect of Li⁺/Na⁺ proportion on the exfoliation of graphite was intensively investigated. The structure and morphology of the as-exfoliated graphene nanosheets (UGN) was determined by a series of characterizations. The results showed that the thicknesses of the as-exfoliated graphene nanosheets were about 2.38-2.56 nm (about 7-8 layers) at the optimal Li⁺/Na⁺ ratio. The potential application of the as-exfoliated graphene nanosheets as additive in grease was evaluated by four-ball friction tester. The results demonstrated that the antifriction and antiwear performances of the grease with 0.06 wt% graphene were significantly improved by 21.35% and 30.32% relative to pure grease, respectively. The friction mechanism was proposed by detecting the worn surfaces.

Comparative Study of Selenides and Tellurides of Transition Metals (Nb and Ta) with Respect to its Catalytic, Antimicrobial, and Molecular Docking Performance

The present research is a comparative study that reports an economical and accessible method to synthesize niobium (Nb) and Tantalum (Ta) selenides and tellurides with useful application in the removal of pollutants in textile, paper, and dyeing industries as well as in medical field. In this study, solid-state process was used to generate nanocomposites and various characterization techniques were employed to compare two groups of materials under investigation. Structure, morphology, elemental constitution, and functional groups of synthesized materials were analyzed with XRD, FESEM coupled with EDS, FTIR, and Raman spectroscopy, respectively. HR-TEM images displayed nanoscale particles with tetragonal and monoclinic crystal structures. The optical properties were evaluated in terms of cut-off wavelength and optical band gap using UV-visible spectroscopy. A comparative behavior of both groups of compounds was assessed with regards to their catalytic and microcidal properties. Extracted nanocomposites when used as catalysts, though isomorphs of each other, showed markedly different behavior in catalytic degradation of MB dye in the presence of NaBH₄ that was employed as a reducing agent. This peculiar deviation might be attributed to slight structural differences between them. Escherichia coli and Staphylococcus aureus (G -ve and + ve bacteria, respectively) were designated as model strains for in vitro antibacterial tests of both clusters by employing disk diffusion method. Superior antibacterial efficacy was observed for telluride system (significant inhibition zones of 26-35 mm) compared with selenide system (diameter of inhibition zone ranged from 0.8 mm to 1.9 mm). In addition, molecular docking study was undertaken to ascertain the binding interaction pattern between NPs and active sites in targeted cell protein. The findings were in agreement with antimicrobial test results suggesting NbTe₄ to be the best inhibitor against FabH and FabI enzymes.

In Situ Study of Structure-Activity Relationship between Structure and Tribological Properties of Bulk Layered Materials by Four-Ball Friction Tester

Encouragingly, a lot of research studies have demonstrated that two-dimensional (2D) nanosheets applied as an additive in oils show preferable friction-reducing and wear resistance performance. However, the current issue was that an elusive way could be adopted to probe the structure-activity relationship between the structure and tribological properties of bulk layered materials due to the structural evolution during friction testing. In this study, we studied the structure-activity relationship between the structure and tribological properties of bulk layered materials (graphite, h-BN, WS₂, and MoS₂) by an in situ four-ball friction tester. The morphological and structural changes of the layered materials after in situ four-ball-milling were detected by a series of characterizations. This study revealed the friction-induced nanostructural evolution behaviors of bulk layered materials by a four-ball mode.

Molybdenum disulfide nanosheets: From exfoliation preparation to biosensing and cancer therapy applications

Over the past few decades, nanotechnology has developed rapidly. Various nanomaterials have been gradually applied in different fields. As a kind of two-dimensional (2D) layered nanomaterial with a graphene-like structure, molybdenum disulfide (MoS₂) nanosheets have broad research prospects in the fields of tumor photothermal therapy, biosensors and other biomedical fields because of their unique band gap structure and physical, chemical and optical properties. In this paper, the latest research progress on MoS₂ is briefly summarized. Several commonly used exfoliation methods for the preparation of MoS₂ nanosheets are reviewed based on the studies in the past five years. Additionally, the current research status of MoS₂ nanosheets in the field of biomedicine is introduced. At the end of this review, a brief overview of the limitations of MoS₂ research and its future prospects in the field of biomedicine is also provided.

Anisotropic Raman spectrum and transport properties of AuTe2Br flakes

Topological semimetal (TSM) AuTe₂Br thin flakes have been studied by Raman spectroscopy and magneto-transport measurement. The angle-resolved polarized Raman spectrum of AuTe₂Br (bulk and thin flake) shows strong anisotropy. Together with high resolution transmission electron microscopy (TEM), we establish a non-destructive method to determine the crystallographic orientation of AuTe₂Br flakes. At high temperature (T  >  50 K), the magneto-resistance (MR) of AuTe₂Br thin flakes shows typical parabolic-like behavior, which can be well fitted by the two-fluid model. However, at low temperature (T  ⩽  30 K), the MR of thin flakes (<17 nm) clearly deviates from the two-fluid model as well as from the Kohler's rule, suggesting a new type of scattering emerging below 30 K. Several possible scattering mechanisms are discussed and the respective corrections to MR are compared with our experimental data. In addition, the conductivity of these metallic crystals is also found to be highly anisotropic, with the hole mobility along the a axis about five times higher than that along the c axis.

Nanohybrids of a MXene and transition metal dichalcogenide for selective detection of volatile organic compounds

Two-dimensional transition metal carbides/nitrides, known as MXenes, have been recently receiving attention for gas sensing. However, studies on hybridization of MXenes and 2D transition metal dichalcogenides as gas-sensing materials are relatively rare at this time. Herein, Ti3C2Tx and WSe2 are selected as model materials for hybridization and implemented toward detection of various volatile organic compounds. The Ti3C2Tx/WSe2 hybrid sensor exhibits low noise level, ultrafast response/recovery times, and good flexibility for various volatile organic compounds. The sensitivity of the hybrid sensor to ethanol is improved by over 12-fold in comparison with pristine Ti3C2Tx. Moreover, the hybridization process provides an effective strategy against MXene oxidation by restricting the interaction of water molecules from the edges of Ti3C2Tx. An enhancement mechanism for Ti3C2Tx/WSe2 heterostructured materials is proposed for highly sensitive and selective detection of oxygen-containing volatile organic compounds. The scientific findings of this work could guide future exploration of next-generation field-deployable sensors.

Ping-Pong Energy Transfer in Covalently Linked Porphyrin-MoS2 Architectures

Molybdenum disulfide nanosheets covalently modified with porphyrin were prepared and fully characterized. Neither the porphyrin absorption nor its fluorescence was notably affected by covalent linkage to MoS2 . The use of transient absorption spectroscopy showed that a complex ping-pong energy-transfer mechanism, namely from the porphyrin to MoS2 and back to the porphyrin, operated. This study reveals the potential of transition-metal dichalcogenides in photosensitization processes.

Pyrene Coating Transition Metal Disulfides as Protection from Photooxidation and Environmental Aging

Environmental degradation of transition metal disulfides (TMDs) is a key stumbling block in a range of applications. We show that a simple one-pot non-covalent pyrene coating process protects TMDs from both photoinduced oxidation and environmental aging. Pyrene is immobilized non-covalently on the basal plane of exfoliated MoS2 and WS2. The optical properties of TMD/pyrene are assessed via electronic absorption and fluorescence emission spectroscopy. High-resolution scanning transmission electron microscopy coupled with electron energy loss spectroscopy confirms extensive pyrene surface coverage, with density functional theory calculations suggesting a strongly bound stable parallel-stacked pyrene coverage of ~2-3 layers on the TMD surfaces. Raman spectroscopy of exfoliated TMDs while irradiating at 0.9 mW/4 μm2 under ambient conditions shows new and strong Raman bands due to oxidized states of Mo and W. Yet remarkably, under the same exposure conditions TMD/pyrene remain unperturbed. The current findings demonstrate that pyrene physisorbed on MoS2 and WS2 acts as an environmental barrier, preventing oxidative surface reactions in the TMDs catalyzed by moisture, air, and assisted by laser irradiation. Raman spectroscopy confirms that the hybrid materials stored under ambient conditions for two years remained structurally unaltered, corroborating the beneficial role of pyrene for not only hindering oxidation but also inhibiting aging.

Functionalized Hybridization of 2D Nanomaterials

The discovery of graphene and subsequent verification of its unique properties have aroused great research interest to exploit diversified graphene-analogous 2D nanomaterials with fascinating physicochemical properties. Through either physical or chemical doping, linkage, adsorption, and hybridization with other functional species into or onto them, more novel/improved properties are readily created to extend/expand their functionalities and further achieve great performance. Here, various functionalized hybridizations by using different types of 2D nanomaterials are overviewed systematically with emphasis on their interaction formats (e.g., in-plane or inter plane), synergistic properties, and enhanced applications. As the most intensely investigated 2D materials in the post-graphene era, transition metal dichalcogenide nanosheets are comprehensively investigated through their element doping, physical/chemical functionalization, and nanohybridization. Meanwhile, representative hybrids with more types of nanosheets are also presented to understand their unique surface structures and address the special requirements for better applications. More excitingly, the van der Waals heterostructures of diverse 2D materials are specifically summarized to add more functionality or flexibility into 2D material systems. Finally, the current research status and faced challenges are discussed properly and several perspectives are elaborately given to accelerate the rational fabrication of varied and talented 2D hybrids.