Thermal conductivity ratio prediction of Al2O3/water nanofluid by applying connectionist methods

The Application Potential of Artificial Intelligence and Numerical Simulation in the Research and Formulation Design of Drilling Fluid Gel Performance

Drilling fluid is pivotal for efficient drilling. However, the gelation performance of drilling fluids is influenced by various complex factors, and traditional methods are inefficient and costly. Artificial intelligence and numerical simulation technologies have become transformative tools in various disciplines. This work reviews the application of four artificial intelligence techniques-expert systems, artificial neural networks (ANNs), support vector machines (SVMs), and genetic algorithms-and three numerical simulation techniques-computational fluid dynamics (CFD) simulations, molecular dynamics (MD) simulations, and Monte Carlo simulations-in drilling fluid design and performance optimization. It analyzes the current issues in these studies, pointing out that challenges in applying these two technologies to drilling fluid gelation performance research include difficulties in obtaining field data and overly idealized model assumptions. From the literature review, it can be estimated that 52.0% of the papers are related to ANNs. Leakage issues are the primary concern for practitioners studying drilling fluid gelation performance, accounting for over 17% of research in this area. Based on this, and in conjunction with the technical requirements of drilling fluids and the development needs of drilling intelligence theory, three development directions are proposed: (1) Emphasize feature engineering and data preprocessing to explore the application potential of interpretable artificial intelligence. (2) Establish channels for open access to data or large-scale oil and gas field databases. (3) Conduct in-depth numerical simulation research focusing on the microscopic details of the spatial network structure of drilling fluids, reducing or even eliminating data dependence.

Experimental study of thermal conductivity coefficient of GNSs-WO3/LP107160 hybrid nanofluid and development of a practical ANN modeling for estimating thermal conductivity

In the present study, the effects of nanoparticles, mass fraction percentage and temperature on the conductive heat transfer coefficient of Graphene nanosheets- Tungsten oxide/Liquid paraffin 107160 hybrid nanofluid was investigated. For this purpose, four different mass fractions were used in the range of 0.005%-5% in a number of examinations. The results illustrated that the thermal conductivity coefficient was increased with the increment of the mass fraction percentage and the temperature of Graphene nanosheets- Tungsten oxide nanomaterials in the base fluid. Then, a feed-forward artificial neural network was used to model the thermal conductivity coefficient. In general, with the increase in temperature and concentration of nanofluid, the value of thermal conductivity increases. The optimum value of thermal conductivity for this experiment was observed in the volume fraction of 5% and at the temperature of 70 °C. The results of this modeling indicated that the fault of the data estimated for the coefficient of thermal conductivity in the Graphene nanosheets- Tungsten oxide/Liquid paraffin 107160 nanofluid, as a function of mass fraction percentage and temperature, was less than 3%, as compared to the experimental data.

Differentiation of NaCl, NaOH, and β-Phenylethylamine Using Ultraviolet Spectroscopy and Improved Adaptive Artificial Bee Colony Combined with BP-ANN Algorithm

The aim of this study is to enhance the classification performance of the back-propagation-artificial neural network (BP-ANN) algorithm for NaCl, NaOH, β-phenylethylamine (PEA), and their mixture, as well as to avoid the defects of the artificial bee colony (ABC) algorithm such as prematurity and local optimization. In this paper, a method that combined an improved adaptive artificial bee colony (IAABC) algorithm and BP-ANN algorithm was proposed. This method improved the ABC algorithm by adding an adaptive local search factor and mutation factor; meanwhile, it can enhance the abilities of the global optimization and local search of the ABC algorithm and avoid prematurity. The extracted score vectors of the principal component of the ultraviolet (UV) spectrum were used as the input variable of the BP-ANN algorithm. The IAABC algorithm was used to optimize the weight and threshold of the BP-ANN algorithm, and the iterative algorithm was repeated until the output accuracy was reached. The output variable was the classification results of NaCl, NaOH, PEA, and the mixture. Meanwhile, the proposed IAABC-BP-ANN algorithm was compared with discriminant analysis (DA), sigmaid-support vector machine (SVM), radial basis function-SVM (RBF-SVM), BP-ANN, and ABC-BP-ANN. Then, the above algorithms were used to classify NaCl, NaOH, PEA, and the mixture, respectively. In the experiment, four indicators, accuracy, recall, precision, and F-score, were used as the evaluation criteria. In addition, the regression equation parameters of the mixture for the testing set were obtained by BP-ANN, ABC-BP-ANN, and IAABC-BP-ANN models. All of the results showed that IAABC-BP-ANN exhibits better performance than other algorithms. Therefore, IAABC-BP-ANN combined with UV spectroscopy is a potential identification tool for the detection of NaCl, NaOH, PEA, and the mixture.

Machine Learning-Based Accelerated Approaches to Infer Breakdown Pressure of Several Unconventional Rock Types

Unconventional oil and gas reservoirs are usually classified by extremely low porosity and permeability values. The most economical way to produce hydrocarbons from such reservoirs is by creating artificially induced channels. To effectively design hydraulic fracturing jobs, accurate values of rock breakdown pressure are needed. Conducting hydraulic fracturing experiments in the laboratory is a very expensive and time-consuming process. Therefore, in this study, different machine learning (ML) models were efficiently utilized to predict the breakdown pressure of tight rocks. In the first part of the study, to measure the breakdown pressures, a comprehensive hydraulic fracturing experimental study was conducted on various rock specimens. A total of 130 experiments were conducted on different rock types such as shales, sandstone, tight carbonates, and synthetic samples. Rock mechanical properties such as Young's modulus (E), Poisson's ratio (ν), unconfined compressive strength, and indirect tensile strength (σ_t) were measured before conducting hydraulic fracturing tests. ML models were used to correlate the breakdown pressure of the rock as a function of fracturing experimental conditions and rock properties. In the ML model, we considered experimental conditions, including the injection rate, overburden pressures, and fracturing fluid viscosity, and rock properties including Young's modulus (E), Poisson's ratio (ν), UCS, and indirect tensile strength (σ_t), porosity, permeability, and bulk density. ML models include artificial neural networks (ANNs), random forests, decision trees, and the K-nearest neighbor. During training of ML models, the model hyperparameters were optimized by the grid-search optimization approach. With the optimal setting of the ML models, the breakdown pressure of the unconventional formation was predicted with an accuracy of 95%. The accuracy of all ML techniques was quite similar; however, an explicit empirical correlation from the ANN technique is proposed. The empirical correlation is the function of all input features and can be used as a standalone package in any software. The proposed methodology to predict the breakdown pressure of unconventional rocks can minimize the laboratory experimental cost of measuring fracture parameters and can be used as a quick assessment tool to evaluate the development prospect of unconventional tight rocks.

Application of back propagation neural network model optimized by particle swarm algorithm in predicting the risk of hypertension

The structure of a back propagation neural network was optimized by a particle swarm optimization (PSO) algorithm, and a back propagation neural network model based on a PSO algorithm was constructed. By comparison with a general back propagation neural network and logistic regression, the fitting performance and prediction performance of the PSO algorithm is discussed. Furthermore, based on the back propagation neural network optimized by the PSO algorithm, the risk factors related to hypertension were further explored through the mean influence value algorithm to construct a risk prediction model. In the evaluation of the fitting effect, the root mean square error and coefficient of determination of the back propagation neural network based on the PSO algorithm were 0.09 and 0.29, respectively. In the comparison of prediction performance, the accuracy, sensitivity, specificity, and area under the receiver operating characteristic curve of the back propagation neural network based on PSO algorithm were 85.38%, 43.90%, 96.66%, and 0.86, respectively. The results showed that the backpropagation neural network optimized by PSO had the best fitting effect and prediction performance. Meanwhile, the mean impact value algorithm could screen out the risk factors related to hypertension and build a disease prediction model, which can provide clues for exploring the pathogenesis of hypertension and preventing hypertension.

Comparing Antibiotic Pastes with Electrospun Nanofibers as Modern Drug Delivery Systems for Regenerative Endodontics

Nanomaterials have various features that make these types of materials able to be applied in different biomedical applications like, diagnosis, treatment, and drug delivery. Using such materials in endodontic filed both to face the challenges that occur during treatment processes and to make these materials have an antibacterial effect without showing any harm on the host cells. The approach of nanofibers loaded with various antibacterial drugs offers a potential treatment method to enhance the elimination procedure of intracanal biofilms. Clinically, many models of bacterial biofilms have been prepared under in vitro conditions for different aims. The process of drug delivery from polymeric nanofibers is based on the principle that the releasing ratio of drug molecules increases due to the increase in the surface area of the hosted structure. In our review, we discuss diverse approaches of loading/releasing drugs on/from nanofibers and we summarized many studies about electrospun nanofibers loaded various drugs applied in the endodontic field. Moreover, we argued both the advantages and the limitations of these modern endodontic treatment materials comparing them with the traditional ones.

Adaptive Levenberg–Marquardt Algorithm: A New Optimization Strategy for Levenberg–Marquardt Neural Networks

Engineering data are often highly nonlinear and contain high-frequency noise, so the Levenberg–Marquardt (LM) algorithm may not converge when a neural network optimized by the algorithm is trained with engineering data. In this work, we analyzed the reasons for the LM neural network’s poor convergence commonly associated with the LM algorithm. Specifically, the effects of different activation functions such as Sigmoid, Tanh, Rectified Linear Unit (RELU) and Parametric Rectified Linear Unit (PRLU) were evaluated on the general performance of LM neural networks, and special values of LM neural network parameters were found that could make the LM algorithm converge poorly. We proposed an adaptive LM (AdaLM) algorithm to solve the problem of the LM algorithm. The algorithm coordinates the descent direction and the descent step by the iteration number, which can prevent falling into the local minimum value and avoid the influence of the parameter state of LM neural networks. We compared the AdaLM algorithm with the traditional LM algorithm and its variants in terms of accuracy and speed in the context of testing common datasets and aero-engine data, and the results verified the effectiveness of the AdaLM algorithm.

Neural Networks Multiobjective Learning With Spherical Representation of Weights

This article presents a novel representation of artificial neural networks (ANNs) that is based on a projection of weights into a new spherical space defined by a radius r and a vector of angles Θ . This spherical representation of ANNs further simplifies the multiobjective learning problem, which is usually treated as a constrained optimization problem that requires great computational effort to maintain the constraints. With the proposed spherical representation, the constrained optimization problem becomes unconstrained, which simplifies the formulation and computational effort required. In addition, it also allows the use of any nonlinear optimization method for the multiobjective learning of ANNs. Results presented in this article show that the proposed spherical representation of weights yields more accurate estimates of the Pareto set than the classical multiobjective approach. Regarding the final solution selected from the Pareto set, our approach was effective and outperformed some state-of-the-art methods on several data sets.

Prediction of Thermo-Physical Properties of TiO2-Al2O3/Water Nanoparticles by Using Artificial Neural Network

In this paper, an artificial neural network is implemented for the sake of predicting the thermal conductivity ratio of TiO₂-Al₂O₃/water nanofluid. TiO₂-Al₂O₃/water in the role of an innovative type of nanofluid was synthesized by the sol-gel method. The results indicated that 1.5 vol.% of nanofluids enhanced the thermal conductivity by up to 25%. It was shown that the heat transfer coefficient was linearly augmented with increasing nanoparticle concentration, but its variation with temperature was nonlinear. It should be noted that the increase in concentration may cause the particles to agglomerate, and then the thermal conductivity is reduced. The increase in temperature also increases the thermal conductivity, due to an increase in the Brownian motion and collision of particles. In this research, for the sake of predicting the thermal conductivity of TiO₂-Al₂O₃/water nanofluid based on volumetric concentration and temperature functions, an artificial neural network is implemented. In this way, for predicting thermal conductivity, SOM (self-organizing map) and BP-LM (Back Propagation-Levenberq-Marquardt) algorithms were used. Based on the results obtained, these algorithms can be considered as an exceptional tool for predicting thermal conductivity. Additionally, the correlation coefficient values were equal to 0.938 and 0.98 when implementing the SOM and BP-LM algorithms, respectively, which is highly acceptable.

Thermal Conductivity Modeling of Nanofluids Contain MgO Particles by Employing Different Approaches

The existence of solid-phase nanoparticles remarkably improves the thermal conductivity of the fluids. The enhancement in this property of the nanofluids is affected by different items such as the solid-phase volume fraction and dimensions, temperature, etc. In the current paper, three different mathematical models, including polynomial correlation, Multivariate Adaptive Regression Spline (MARS), and Group Method of Data Handling (GMDH), are applied to forecast the thermal conductivity of nanofluids containing MgO particles. The inputs of the model are the base fluid thermal conductivity, volume concentration, and average dimension of solid-phase, and nanofluids’ temperature. Comparing the proposed models revealed higher confidence of GMDH in estimating the thermal conductivity, which is attributed to its complicated structure and more appropriate consideration of the input’s interaction. The values of R-squared for the correlation, MARS, and GMDH are 0.9949, 0.9952, and 0.9991, respectively. In addition, based on the sensitivity analysis, the effect of thermal conductivity of the base fluid on the overall thermal conductivity of nanofluids is more remarkable compared with the other inputs such as volume fraction, temperature, and dimensions of the particles which are used as the inputs of the models.

Numerical Investigation of Forced Convective Heat Transfer and Performance Evaluation Criterion of Al2O3/Water Nanofluid Flow inside an Axisymmetric Microchannel

Al2O3/water nanofluid conjugate heat transfer inside a microchannel is studied numerically. The fluid flow is laminar and a constant heat flux is applied to the axisymmetric microchannel’s outer wall, and the two ends of the microchannel’s wall are considered adiabatic. The problem is inherently three-dimensional, however, in order to reduce the computational cost of the solution, it is rational to consider only a half portion of the axisymmetric microchannel and the domain is revolved through its axis. Hence. the problem is reduced to a two-dimensional domain, leading to less computational grid. At the centerline (r = 0), as the flow is axisymmetric, there is no radial gradient (∂u/∂r = 0, v = 0, ∂T/∂r = 0). The effects of four Reynolds numbers of 500, 1000, 1500, and 2000; particle volume fractions of 0% (pure water), 2%, 4%, and 6%; and nanoparticles diameters in the range of 10 nm, 30 nm, 50 nm, and 70 nm on forced convective heat transfer as well as performance evaluation criterion are studied. The parameter of performance evaluation criterion provides valuable information related to heat transfer augmentation together with pressure losses and pumping power needed in a system. One goal of the study is to address the expense of increased pressure loss for the increment of the heat transfer coefficient. Furthermore, it is shown that, despite the macro-scale problem, in microchannels, the viscous dissipation effect cannot be ignored and is like an energy source in the fluid, affecting temperature distribution as well as the heat transfer coefficient. In fact, it is explained that, in the micro-scale, an increase in inlet velocity leads to more viscous dissipation rates and, as the friction between the wall and fluid is considerable, the temperature of the wall grows more intensely compared with the bulk temperature of the fluid. Consequently, in microchannels, the thermal behavior of the fluid would be totally different from that of the macro-scale.

Current Status Investigation and Predicting Carbon Dioxide Emission in Latin American Countries by Connectionist Models

Currently, one of the biggest concerns of human beings is greenhouse gas emissions, especially carbon dioxide emissions in developed and under-developed countries. In this study, connectionist models including LSSVM (Least Square Support Vector Machine) and evolutionary methods are employed for predicting the amount of CO 2 emission in six Latin American countries, i.e., Brazil, Mexico, Argentina, Peru, Chile, Venezuela and Uruguay. The studied region is modelled based on the available input data in terms of million tons including oil (million tons), gas (million tons oil equivalent), coal (million tons oil equivalent), R e w (million tons oil equivalent) and Gross Domestic Product (GDP) in terms of billion U.S. dollars. Moreover, the available patents in the field of climate change mitigation in six Latin American countries, namely Brazil, Mexico, Argentina, Peru, Chile, Venezuela and Uruguay, have been reviewed and analysed. The results show that except Venezuela, all other mentioned countries have invested in renewable energy R&D activities. Brazil and Argentina have the highest share of renewable energies, which account for 60% and 72%, respectively.

Development of Simple-to-Use Predictive Models to Determine Thermal Properties of Fe2O3/Water-Ethylene Glycol Nanofluid

Thermophysical properties of nanofluids play a key role in their heat transfer capability and can be significantly affected by several factors, such as temperature and concentration of nanoparticles. Developing practical and simple-to-use predictive models to accurately determine these properties can be advantageous when numerous dependent variables are involved in controlling the thermal behavior of nanofluids. Artificial neural networks are reliable approaches which recently have gained increasing prominence and are widely used in different applications for predicting and modeling various systems. In the present study, two novel approaches, Genetic Algorithm-Least Square Support Vector Machine (GA-LSSVM) and Particle Swarm Optimization- artificial neural networks (PSO-ANN), are applied to model the thermal conductivity and dynamic viscosity of Fe2O3/EG-water by considering concentration, temperature, and the mass ratio of EG/water as the input variables. Obtained results from the models indicate that GA-LSSVM approach is more accurate in predicting the thermophysical properties. The maximum relative deviation by applying GA-LSSVM was found to be approximately ±5% for the thermal conductivity and dynamic viscosity of the nanofluid. In addition, it was observed that the mass ratio of EG/water has the most significant impact on these properties.