Data mining in Raman imaging in a cellular biological system

Label-free Raman microspectroscopic imaging with chemometrics for cellular investigation of apple ring rot and nondestructive early recognition using near-infrared reflection spectroscopy with machine learning

Apple ring rot caused by Botryosphaeria dothidea can cause fruit decay during the growth and storage stages of apple fruit. Understanding the infection process and cellular defense response at the cellular micro-level holds immense importance in the field of prevention and control. Consequently, there is a pressing need to develop suitable chemical imaging analysis methods. Here we proposed a label-free, high-throughput imaging method for cellular investigation of apple fruit ring rot infected by Botryosphaeria dothidea, based on confocal Raman microspectroscopic imaging technology combined with multivariate curve resolution-alternating least squares algorithm (MCR-ALS). We conducted Raman measurements on every apple fruit and obtain an image cube. This cube was then unfolded into an augmented matrix in a column-wise manner. We proceeded with simultaneous MCR-ALS analysis, resolving the single-substance spectrum and concentration profile from the mixed signals. Lastly, the accurate and pure molecular imaging of low methoxyl pectin, high methoxyl pectin, cellulose, lignin, and phenols were realized by refolding the resolved concentration data to construct the composition image. Thereafter, we realized the study of the spatial-temporal changes distribution of the above substances in the cuticle and cell wall of green and red apples at different stages of infection. The imaging method proposed in this paper is expected to provide a chemical imaging strategy for studying pathogen infection process and fruit defense response at the cellular level. In addition, by utilizing a fiber-optic probe near-infrared reflection spectrometer in conjunction with machine learning, we developed a rapid and non-destructive classification method. This method allows for the timely identification of apples exhibiting early infection by Botryosphaeria dothidea. Notably, both principal component analysis-quadratic discriminant analysis and support vector machine achieved a classification accuracy of 100%.

Evaluation of Raman spectroscopy combined with the gated recurrent unit serum detection method in early screening of gastrointestinal cancer

Gastric and colorectal cancers are significant causes of human mortality. Conventionally, the diagnosis of gastrointestinal tumors has been accomplished through image-based techniques, including endoscopic and biopsy procedures coupled with tissue staining. Most of these methods are invasive. In contrast, Raman spectroscopy has the advantages of being non-invasive and label-free and requiring no additional reagents, making it a potential tool for the detection of serum components. In this study, we collected Raman spectra of serum samples from patients with gastric cancer (n = 93) and colorectal cancer (n = 92) and from healthy individuals (n = 100). Analysis of Raman peak areas revealed that cancer patients had significantly higher peak areas at around 2923 cm-1 compared to normal individuals, which corresponded to the presence of lipids and proteins. We successfully achieved the early screening of gastrointestinal tumors using the improved gated recurrent unit (GRU) algorithm and traditional machine learning methods. The accuracy of identifying digestive tract tumors using different recognition models exceeds 84.72%, with support vector machine (SVM) and GRU achieving 100% accuracy. The use of GRU further demonstrated its ability to differentiate subtypes of gastric and colorectal cancers based on the degree of differentiation and stage, with a recognition accuracy exceeding 95%, which is challenging using traditional machine learning methods. Furthermore, our study revealed that principal component analysis (PCA) dimensionality reduction has a limited impact on the recognition results obtained using different recognition models.

Strategies and Progress of Raman Technologies for Cellular Uptake Analysis of the Drug Delivery Systems

Nanoparticle (NP)-based drug delivery systems have the potential to significantly enhance the pharmacological and therapeutic properties of drugs. These systems enhance the bioavailability and biocompatibility of pharmaceutical agents via enabling targeted delivery to specific tissues or organs. However, the efficacy and safety of these systems are largely dependent on the cellular uptake and intracellular transport of NPs. Thus, it is crucial to monitor the intracellular behavior of NPs within a single cell. Yet, it is challenging due to the complexity and size of the cell. Recently, the development of the Raman instrumentation offers a versatile tool to allow noninvasive cellular measurements. The primary objective of this review is to highlight the most recent advancements in Raman techniques (spontaneous Raman scattering, bioorthogonal Raman scattering, coherence Raman scattering, and surface-enhanced Raman scattering) when it comes to assessing the internalization of NP-based drug delivery systems and their subsequent movement within cells.

Raman Fingerprints of SARS-CoV-2 Omicron Subvariants: Molecular Roots of Virological Characteristics and Evolutionary Directions

The latest RNA genomic mutation of SARS-CoV-2 virus, termed the Omicron variant, has generated a stream of highly contagious and antibody-resistant strains, which in turn led to classifying Omicron as a variant of concern. We systematically collected Raman spectra from six Omicron subvariants available in Japan (i.e., BA.1.18, BA.2, BA.4, BA.5, XE, and BA.2.75) and applied machine-learning algorithms to decrypt their structural characteristics at the molecular scale. Unique Raman fingerprints of sulfur-containing amino acid rotamers, RNA purines and pyrimidines, tyrosine phenol ring configurations, and secondary protein structures clearly differentiated the six Omicron subvariants. These spectral characteristics, which were linked to infectiousness, transmissibility, and propensity for immune evasion, revealed evolutionary motifs to be compared with the outputs of genomic studies. The availability of a Raman "metabolomic snapshot", which was then translated into a barcode to enable a prompt subvariant identification, opened the way to rationalize in real-time SARS-CoV-2 activity and variability. As a proof of concept, we applied the Raman barcode procedure to a nasal swab sample retrieved from a SARS-CoV-2 patient and identified its Omicron subvariant by coupling a commercially available magnetic bead technology with our newly developed Raman analyses.

Measurement of chemical penetration in skin using Stimulated Raman scattering microscopy and multivariate curve resolution - alternating least squares

The mechanistic understanding of skin penetration underpins the design, efficacy and risk assessment of many high-value products including functional personal care products, topical and transdermal drugs. Stimulated Raman scattering (SRS) microscopy, a label free chemical imaging tool, combines molecular spectroscopy with submicron spatial information to map the distribution of chemicals as they penetrate the skin. However, the quantification of penetration is hampered by significant interference from Raman signals of skin constituents. This study reports a method for disentangling exogeneous contributions and measuring their permeation profile through human skin combining SRS measurements with chemometrics. We investigated the spectral decomposition capability of multivariate curve resolution - alternating least squares (MCR-ALS) using hyperspectral SRS images of skin dosed with 4-cyanophenol. By performing MCR-ALS on the fingerprint region spectral data, the distribution of 4-cyanophenol in skin was estimated in an attempt to quantify the amount permeated at different depths. The reconstructed distribution was compared with the experimental mapping of CN, a strong vibrational peak in 4-cyanophenol where the skin is spectroscopically silent. The similarity between MCR-ALS resolved and experimental distribution in skin dosed for 4 h was 0.79 which improved to 0.91 for skin dosed for 1 h. The correlation was observed to be lower for deeper layers of skin where SRS signal intensity is low which is an indication of low sensitivity of SRS. This work is the first demonstration, to the best of our knowledge, of combining SRS imaging technique with spectral unmixing methods for direct observation and mapping of the chemical penetration and distribution in biological tissues.

Influence of Yokukansan on the refractive index of neuroblastoma cells

Yokukansan (YKS) is a traditional Japanese herbal medicine that is increasingly being studied for its effects on neurodegenerative diseases. In our study, we presented a novel methodology for a multimodal analysis of the effects of YKS on nerve cells. The measurements of 3D refractive index distribution and its changes performed by holographic tomography were supported with an investigation by Raman micro-spectroscopy and fluorescence microscopy to gather complementary morphological and chemical information about cells and YKS influence. It was shown that at the concentrations tested, YKS inhibits proliferation, possibly involving reactive oxygen species. Also substantial changes in the cell RI after few hours of YKS exposure were detected, followed by longer-term changes in cell lipid composition and chromatin state.

Decoding the metabolic response of Escherichia coli for sensing trace heavy metals in water

Heavy metal contamination due to industrial and agricultural waste represents a growing threat to water supplies. Frequent and widespread monitoring for toxic metals in drinking and agricultural water sources is necessary to prevent their accumulation in humans, plants, and animals, which results in disease and environmental damage. Here, the metabolic stress response of bacteria is used to report the presence of heavy metal ions in water by transducing ions into chemical signals that can be fingerprinted using machine learning analysis of vibrational spectra. Surface-enhanced Raman scattering surfaces amplify chemical signals from bacterial lysate and rapidly generate large, reproducible datasets needed for machine learning algorithms to decode the complex spectral data. Classification and regression algorithms achieve limits of detection of 0.5 pM for As³⁺ and 6.8 pM for Cr⁶⁺, 100,000 times lower than the World Health Organization recommended limits, and accurately quantify concentrations of analytes across six orders of magnitude, enabling early warning of rising contaminant levels. Trained algorithms are generalizable across water samples with different impurities; water quality of tap water and wastewater was evaluated with 92% accuracy.

Correlative Fluorescence and Raman Microscopy to Define Mitotic Stages at the Single-Cell Level: Opportunities and Limitations in the AI Era

Nowadays, morphology and molecular analyses at the single-cell level have a fundamental role in understanding biology better. These methods are utilized for cell phenotyping and in-depth studies of cellular processes, such as mitosis. Fluorescence microscopy and optical spectroscopy techniques, including Raman micro-spectroscopy, allow researchers to examine biological samples at the single-cell level in a non-destructive manner. Fluorescence microscopy can give detailed morphological information about the localization of stained molecules, while Raman microscopy can produce label-free images at the subcellular level; thus, it can reveal the spatial distribution of molecular fingerprints, even in live samples. Accordingly, the combination of correlative fluorescence and Raman microscopy (CFRM) offers a unique approach for studying cellular stages at the single-cell level. However, subcellular spectral maps are complex and challenging to interpret. Artificial intelligence (AI) may serve as a valuable solution to characterize the molecular backgrounds of phenotypes and biological processes by finding the characteristic patterns in spectral maps. The major contributions of the manuscript are: (I) it gives a comprehensive review of the literature focusing on AI techniques in Raman-based cellular phenotyping; (II) via the presentation of a case study, a new neural network-based approach is described, and the opportunities and limitations of AI, specifically deep learning, are discussed regarding the analysis of Raman spectroscopy data to classify mitotic cellular stages based on their spectral maps.

Discovering Glioma Tissue through Its Biomarkers' Detection in Blood by Raman Spectroscopy and Machine Learning

The most commonly occurring malignant brain tumors are gliomas, and among them is glioblastoma multiforme. The main idea of the paper is to estimate dependency between glioma tissue and blood serum biomarkers using Raman spectroscopy. We used the most common model of human glioma when continuous cell lines, such as U87, derived from primary human tumor cells, are transplanted intracranially into the mouse brain. We studied the separability of the experimental and control groups by machine learning methods and discovered the most informative Raman spectral bands. During the glioblastoma development, an increase in the contribution of lactate, tryptophan, fatty acids, and lipids in dried blood serum Raman spectra were observed. This overlaps with analogous results of glioma tissues from direct Raman spectroscopy studies. A non-linear relationship between specific Raman spectral lines and tumor size was discovered. Therefore, the analysis of blood serum can track the change in the state of brain tissues during the glioma development.

Building an ensemble learning model for gastric cancer cell line classification via rapid raman spectroscopy

Cell misuse and cross-contamination can affect the accuracy of cell research results and result in wasted time, manpower and material resources. Thus, cell line identification is important and necessary. At present, the commonly used cell line identification methods need cell staining and culturing. There is therefore a need to develop a new method for the rapid and automated identification of cell lines. Raman spectroscopy has become one of the emerging techniques in the field of microbial identification, with the advantages of being rapid and noninvasive and providing molecular information for biological samples, which is beneficial in the identification of cell lines. In this study, we built a library of Raman spectra for gastric mucosal epithelial cell lines GES-1 and gastric cancer cell lines, such as AGS, BGC-823, HGC-27, MKN-45, MKN-74 and SNU-16. Five spectral datasets were constructed using spectral data and included the full spectrum, fingerprint region, high-wavelength number region and Raman background of Raman spectra. A stacking ensemble learning model, SL-Raman, was built for different datasets, and gastric cancer cell identification was achieved. For the gastric cancer cells we studied, the differentiation accuracy of SL-Raman was 100% for one of the gastric cancer cells and 100% for six of the gastric cancer cells. Additionally, the separation accuracy for two gastric cancer cells with different degrees of differentiation was 100%. These results demonstrate that Raman spectroscopy combined with SL-Raman may be a new method for the rapid and accurate identification of gastric cancer. In addition, the accuracy of 94.38% for classifying Raman spectral background data using machine learning demonstrates that the Raman spectral background contains some useful spectral features. These data have been overlooked in previous studies.

A User-Friendly Platform for Single-Cell Raman Spectroscopy Analysis

The optimization of Raman instruments greatly expands our understanding of single-cell Raman spectroscopy. The improvement in the speed and sensitivity of the instrument and the implementation of advanced data mining methods help to reveal the complex chemical and biological information within the Raman spectral data. Here we introduce a new Matlab Graphical User-Friendly Interface (GUI), named "CELL IMAGE" for the analysis of cellular Raman spectroscopy data. The three main steps of data analysis embedded in the GUI include spectral processing, pattern recognition and model validation. Various well-known methods are available to the user of the GUI at each step of the analysis. Herein, a new subsampling optimization method is integrated into the GUI to estimate the minimum number of spectral collection points. The introduction of the signal-to-noise ratio (SNR) of the analyte in the binomial statistical model means the new subsampling model is more sophisticated and suitable for complicated Raman cell data. These embedded methods allow "CELL IMAGE" to transform spectral information into biological information, including single-cell visualization, cell classification and biomolecular/ drug quantification.

Raman Metabolomics of Candida auris Clades: Profiling and Barcode Identification

This study targets on-site/real-time taxonomic identification and metabolic profiling of seven different Candida auris clades/subclades by means of Raman spectroscopy and imaging. Representative Raman spectra from different Candida auris samples were systematically deconvoluted by means of a customized machine-learning algorithm linked to a Raman database in order to decode structural differences at the molecular scale. Raman analyses of metabolites revealed clear differences in cell walls and membrane structure among clades/subclades. Such differences are key in maintaining the integrity and physical strength of the cell walls in the dynamic response to external stress and drugs. It was found that Candida cells use the glucan structure of the extracellular matrix, the degree of α-chitin crystallinity, and the concentration of hydrogen bonds between its antiparallel chains to tailor cell walls’ flexibility. Besides being an effective ploy in survivorship by providing stiff shields in the α–1,3–glucan polymorph, the α–1,3–glycosidic linkages are also water-insoluble, thus forming a rigid and hydrophobic scaffold surrounded by a matrix of pliable and hydrated β–glucans. Raman analysis revealed a variety of strategies by different clades to balance stiffness, hydrophobicity, and impermeability in their cell walls. The selected strategies lead to differences in resistance toward specific environmental stresses of cationic/osmotic, oxidative, and nitrosative origins. A statistical validation based on principal component analysis was found only partially capable of distinguishing among Raman spectra of clades and subclades. Raman barcoding based on an algorithm converting spectrally deconvoluted Raman sub-bands into barcodes allowed for circumventing any speciation deficiency. Empowered by barcoding bioinformatics, Raman analyses, which are fast and require no sample preparation, allow on-site speciation and real-time selection of appropriate treatments.

Fingerprint multiplex CARS at high speed based on supercontinuum generation in bulk media and deep learning spectral denoising

We introduce a broadband coherent anti-Stokes Raman scattering (CARS) microscope based on a 2-MHz repetition rate ytterbium laser generating 1035-nm high-energy (≈µJ level) femtosecond pulses. These features of the driving laser allow producing broadband red-shifted Stokes pulses, covering the whole fingerprint region (400-1800 cm^-1), employing supercontinuum generation in a bulk crystal. Our system reaches state-of-the-art acquisition speed (<1 ms/pixel) and unprecedented sensitivity of ≈14.1 mmol/L when detecting dimethyl sulfoxide in water. To further improve the performance of the system and to enhance the signal-to-noise ratio of the CARS spectra, we designed a convolutional neural network for spectral denoising, coupled with a post-processing pipeline to distinguish different chemical species of biological tissues.

Integration of surface-enhanced Raman spectroscopy (SERS) and machine learning tools for coffee beverage classification

Surface-enhanced Raman spectroscopy (SERS) is a powerful tool for molecule identification. However, profiling complex samples remains a challenge because SERS peaks are likely to overlap, confounding features when multiple analytes are present in a single sample. In addition, SERS often suffers from high variability in signal enhancement due to nonuniform SERS substrate. The machine learning classification techniques widely used for facial recognition are excellent tools to overcome the complexity of SERS data interpretation. Herein, we reported a sensor for classifying coffee beverages by integrating SERS, feature extractions, and machine learning classifiers. A versatile and low-cost SERS substrate, called nanopaper, was used to enhance Raman signals of dilute compounds in coffee beverages. Two classic multivariate analysis techniques, Principal Component Analysis (PCA) and Discriminant Analysis of Principal Components (DAPC), were used to extract the significant spectral features, and the performance of various machine learning classifiers was evaluated. The combination of DAPC with Support Vector Machine (SVM) or K-Nearest Neighbor (KNN) shows the best performance for classifying coffee beverages. This user-friendly and versatile sensor has the potential to be a practical quality-control tool for the food industry.

Research on the difference between patients with coronary heart disease and healthy controls by surface enhanced Raman spectroscopy

Coronary heart disease (CHD) is one of the primary causes of death globally. There are several diagnostic techniques for CHD at present, but they are invasive and with limited accuracy. In the work, measurement of human urine based on surface-enhanced Raman spectroscopy (SERS) was proposed to diagnose CHD. Urine samples of 157 CHD patients and 63 healthy controls (HC) were investigated by SERS. Statistical analysis of the measured data was then performed. It was found that there were intensity differences in nine Raman peaks (1223/1243/1272/1463/1481/1516/1536/1541/1550 cm^-1) between CHD and HC in their average SERS spectrum. Furthermore, principal component analysis (PCA)-linear discriminant analysis (LDA) was then utilized to establish a prediction model to classify CHD and HC. It revealed that the accuracy, specificity and sensitivity of the prediction model validated by leave-one-patient-out cross validation (LOPOCV) were 84.09%, 92.06% and 80.89%, respectively. Therefore, the proposed method can be employed as a non-invasive, rapid and accurate tool for CHD diagnosis in clinical application.

Label-Free Differentiation of Cancer and Non-Cancer Cells Based on Machine-Learning-Algorithm-Assisted Fast Raman Imaging

This paper proposes a rapid, label-free, and non-invasive approach for identifying murine cancer cells (B16F10 melanoma cancer cells) from non-cancer cells (C2C12 muscle cells) using machine-learning-assisted Raman spectroscopic imaging. Through quick Raman spectroscopic imaging, a hyperspectral data processing approach based on machine learning methods proved capable of presenting the cell structure and distinguishing cancer cells from non-cancer muscle cells without compromising full-spectrum information. This study discovered that biomolecular information-nucleic acids, proteins, and lipids-from cells could be retrieved efficiently from low-quality hyperspectral Raman datasets and then employed for cell line differentiation.

Multimodal bioimaging using nanodiamond and gold hybrid nanoparticles

Hybrid core–shell nanodiamond-gold nanoparticles were synthesized and characterized as a novel multifunctional material with tunable and tailored properties for multifunctional biomedical applications. The combination of nanostructured gold and nanodiamond properties afford new options for optical labeling, imaging, sensing, and drug delivery, as well as targeted treatment. ND@Au core–shell nanoparticles composed of nanodiamond (ND) core doped with Si vacancies (SiV) and Au shell were synthesized and characterized in terms of their biomedical applications. Several bioimaging modalities based on the combination of optical and spectroscopic properties of the hybrid nano-systems are demonstrated in cellular and developing zebrafish larvae models. The ND@Au nanoparticles exhibit isolated ND’s Raman signal of sp3 bonded carbon, one-photon fluorescence of SiV with strong zero-phonon line at 740 nm, two-photon excited fluorescence of nanogold with short fluorescence lifetime and strong absorption of X-ray irradiation render them possible imaging agent for Raman mapping, Fluorescence imaging, two-photon Fluorescence Lifetime Imaging (TP-FLIM) and high-resolution hard-X-ray microscopy in biosystems. Potential combination of the imaging facilities with other theranostic functionalities is discussed.

Looking for a perfect match: multimodal combinations of Raman spectroscopy for biomedical applications

Raman spectroscopy has shown very promising results in medical diagnostics by providing label-free and highly specific molecular information of pathological tissue ex vivo and in vivo. Nevertheless, the high specificity of Raman spectroscopy comes at a price, i.e., low acquisition rate, no direct access to depth information, and limited sampling areas. However, a similar case regarding advantages and disadvantages can also be made for other highly regarded optical modalities, such as optical coherence tomography, autofluorescence imaging and fluorescence spectroscopy, fluorescence lifetime microscopy, second-harmonic generation, and others. While in these modalities the acquisition speed is significantly higher, they have no or only limited molecular specificity and are only sensitive to a small group of molecules. It can be safely stated that a single modality provides only a limited view on a specific aspect of a biological specimen and cannot assess the entire complexity of a sample. To solve this issue, multimodal optical systems, which combine different optical modalities tailored to a particular need, become more and more common in translational research and will be indispensable diagnostic tools in clinical pathology in the near future. These systems can assess different and partially complementary aspects of a sample and provide a distinct set of independent biomarkers. Here, we want to give an overview on the development of multimodal systems that use RS in combination with other optical modalities to improve the diagnostic performance.