Selective crosslinking or addressing of individual domains within block copolymer nanostructures

Inside Block Copolymer Micelles-Tracing Interfacial Influences on Crosslinking Efficiency in Nanoscale Confined Spaces

Recently, several studies have demonstrated the excellent capabilities of tip-enhanced Raman spectroscopyfor in-depth investigations of structural properties of matter with unprecedented resolution and chemical specificity. These capabilities are utilized here to study the internal structure of core-crosslinked micelles, which are formed by self-assembly of the diblock terpolymer poly(ethylene oxide)-block-poly(furfuryl glycidylether-co-tert-butylglycidyl ether). Supplementing force-volume atomic force microscopy experiments address additionally the nanomechanical properties. Particularly, TERS enables investigating the underlying principles influencing the homogeneity and efficiency of the Diels-Alder core-crosslinking process in the confined hydrophobic core. While the central core region is homogenously crosslinked, a breakdown of the crosslinking reaction is observed in the core-corona interfacial region. The results corroborate that a strong crosslinking efficiency is directly correlated to the formation of a mixed zone of the glycidyl ether and PEO corona blocks reaching ≈5 nm into the core region. Concomitantly a strong exclusion of the encapsulated bismaleimide crosslinker from the interfacial region is observed. It is conceivable that a changed structure, chemical composition and altered nanomechanical properties of this interfacial region may also influence the crosslinking efficiency across the entire core region by a modification of the solubility of the crosslinker in the interfacial core-corona region.

Threonine-Based Stimuli-Responsive Nanoparticles with Aggregation-Induced Emission-Type Fixed Cores for Detection of Amines in Aqueous Solutions

Stimuli-responsive polymeric nanoparticles (NPs) exhibit reversible changes in the dispersion or aggregation state in response to external stimuli. In this context, we designed and synthesized core-shell NPs with threonine-containing weak polyelectrolyte shells and fluorescent cross-linked cores, which are applicable for the detection of pH changes and amine compounds in aqueous solution. Stable and uniform NP(dTh) and NP(Fl), consisting of fluorescent symmetric diphenyl dithiophene (dTh) and diphenyl fluorene (Fl) cross-linked cores, were prepared by site-selective Suzuki coupling reactions in self-assembled block copolymer. NP(Fl) with the Fl unit in the core showed a high fluorescence intensity in different solvents, which is regarded as an aggregation-induced emission-type NP showing strong emission in aggregated states in the cross-linked core. Unimodal NPs were observed in water at different pH values, and the diameter of NP(Fl) changed from 122 (pH = 2) to 220 nm (pH = 11). Furthermore, pH-dependent changes of the fluorescence peak positions and intensities were detected, which may be due to the core aggregation derived from the deprotonation of the threonine-based shell fragment. Specific interactions between the threonine-based shell of NP(Fl) and amine compounds (triethylamine and p-phenylenediamine) resulted in fluorescence quenching, suggesting the feasibility of fluorescent amine detection.

Polyether-Based Diblock Terpolymer Micelles with Pendant Anthracene Units-Light-Induced Crosslinking and Limitations Regarding Reversibility

The synthesis of 9-methylanthracenyl glycidyl ether (AnthGE) as a crosslinkable monomer that can be applied in anionic ring opening polymerization is reported. Diblock terpolymers of the composition methoxy-poly(ethylene oxide)-block-poly(2-ethylhexyl glycidyl ether-co-9-methylanthracenyl glycidyl ether) (mPEO-b-P(EHGE-co-AnthGE) with 10 to 24 wt% of AnthGE are synthesized and characterized. Their micellization behavior, as well as their light-induced core-crosslinking via irradiation with UV light (λ = 365 nm) is studied. The results are compared with studies on the dimerization, and the dimer cleavage via irradiation with UV-C light (λ = 254 nm), of the same diblock terpolymer in organic solution, and the small-molecule model compound 9-methoxymethylanthracene. Differences in ¹ H NMR spectra of the crosslinked or dimerized compounds and reaction kinetics of the dimerization reactions under different conditions suggest possible side reactions for the case of the core-crosslinking of micelles in aqueous solution. These side reactions limit the reversibility of the anthracene dimerization reaction in aqueous solutions, even if the anthracene molecule is encapsulated within the hydrophobic core of a polymeric micelle.

Linear/Ladder-Like Polysiloxane Block Copolymers with Methyl-, Trifluoropropyl- and Phenyl- Siloxane Units for Surface Modification

Multiblock copolymers containing linear polydimethylsiloxane or polymethyltrifluoropropylsiloxane and ladder-like polyphenylsiloxane were synthesized in a one-step pathway. The functional homopolymer blocks and final multiblock copolymers were characterized using solution and solid-state multinuclear ¹H, ¹³C, ¹⁹F, and ²⁹Si NMR spectroscopy. It was shown that the ladder-like block contains silanol units, which influence the adhesion properties of multiblock copolymers and morphology of their casted films. The adhesion to metals and mechanical properties of multiblock copolymers were tested. The SEM study of casted films of multiblock copolymers shows the variety of formed morphologies, including long-strip-like or globular.

Self-assembly of dextran - b - deoxycholic acid polyester copolymers: Copolymer composition and self-assembly procedure tune the aggregate size and morphology

Self-assembly potential of new amphiphilic block copolymers containing dextran (M_n 4500, 8000, 15,000) and a semi-rigid deoxycholic acid-oligoethyleneglycol polyester (M_n 2500-8800, 2 or 4 ethyleneglycol units), was evaluated as a function of copolymer composition and self-assembly procedure, using dynamic light scattering and transmission electron microscopy. Addition of copolymer solution to water provided small star-like micelles (∼ 100 nm), while addition of water to copolymer solution led to various morphologies and sizes (60-600 nm), depending on polymer composition. Worm-like micelles were obtained from a copolymer containing dextran with M_n 4500 and 66 wt% polyester, and vesicles were formed by copolymers prepared from dextran with M_n 8000 and containing 46 wt% polyester. Presence of a longer oligoethyleneglycol decreased the size of micelles and vesicles due to an enhanced flexibility of the polyester hydrophobic block. The results allow the selection of the most appropriate parameters to obtain the desired aggregate characteristics.

Scaffolding polymeric biomaterials: Are naturally occurring biological macromolecules more appropriate for tissue engineering?

Nowadays, tissue and organ failures resulted from injury, aging accounts, diseases or other type of damages is one of the most important health problems with an increasing incidence worldwide. Current treatments have limitations including, low graft efficiency, shortage of donor organs, as well as immunological problems. In this context, tissue engineering (TE) was introduced as a novel and versatile approach for restoring tissue/organ function using living cells, scaffold and bioactive (macro-)molecules. Among these, scaffold as a three-dimensional (3D) support material, provide physical and chemical cues for seeding cells and has an essential role in cell missions. Among the wide verity of scaffolding materials, natural or synthetic biopolymers are the most commonly biomaterials mainly due to their unique physicochemical and biological features. In this context, naturally occurring biological macromolecules are particular of interest owing to their low immunogenicity, excellent biocompatibility and cytocompatibility, as well as antigenicity that qualified them as popular choices for scaffolding applications. In this review, we highlighted the potentials of natural and synthetic polymers as scaffolding materials. The properties, advantages, and disadvantages of both polymer types as well as the current status, challenges, and recent progresses regarding the application of them as scaffolding biomaterials are also discussed.

Tannic Acid-Mediated Aggregate Stabilization of Poly(N-vinylpyrrolidone)-b-poly(oligo (ethylene glycol) methyl ether methacrylate) Double Hydrophilic Block Copolymers

The self-assembly of block copolymers in aqueous solution is an important field in modern polymer science that has been extended to double hydrophilic block copolymers (DHBC) in recent years. In here, a significant improvement of the self-assembly process of DHBC in aqueous solution by utilizing a linear-brush macromolecular architecture is presented. The improved self-assembly behavior of poly(N-vinylpyrrolidone)-b-poly(oligo(ethylene glycol) methyl ether methacrylate) (PVP-b-P(OEGMA)) and its concentration dependency is investigated via dynamic light scattering (DLS) (apparent hydrodynamic radii ≈ 100-120 nm). Moreover, the DHBC assemblies can be non-covalently crosslinked with tannic acid via hydrogen bonding, which leads to the formation of small aggregates as well (apparent hydrodynamic radius ≈ 15 nm). Non-covalent crosslinking improves the self-assembly and stabilizes the aggregates upon dilution, reducing the concentration dependency of aggregate self-assembly. Additionally, the non-covalent aggregates can be disassembled in basic media. The presence of aggregates was studied via cryogenic scanning electron microscopy (cryo-SEM) and DLS before and after non-covalent crosslinking. Furthermore, analytical ultracentrifugation of the formed aggregate structures was performed, clearly showing the existence of polymer assemblies, particularly after non-covalent crosslinking. In summary, we report on the completely hydrophilic self-assembled structures in solution formed from fully biocompatible building entities in water.

Antifouling Properties of a Self-Assembling Glutamic Acid-Lysine Zwitterionic Polymer Surface Coating

There is a need for the development of antifouling materials to resist adsorption of biomacromolecules. Here we describe the preparation of a novel zwitterionic block copolymer with the potential to prevent or delay the formation of microbial biofilms. The block copolymer comprised a zwitterionic (hydrophilic) section of alternating glutamic acid (negatively charged) and lysine (positively charged) units and a hydrophobic polystyrene section. Cryo-TEM and dynamic-light-scattering (DLS) results showed that, on average, the block copolymer self-assembled into 7-nm-diameter micelles in aqueous solutions (0 to 100 mM NaCl, pH 6). Quartz crystal microbalance with dissipation monitoring (QCM-D), atomic force microscopy (AFM), and contact angle measurements demonstrated that the block copolymer self-assembled into a brush-like monolayer on polystyrene surfaces. The brush-like monolayer produced from a 100 mg/L block copolymer solution exhibited an average distance, d, of approximately 4-8 nm between each block copolymer molecule (center to center). Once the brush-like monolayer self-assembled, it reduced EPS adsorption onto the polystyrene surface by ∼70% (mass), reduced the rate of bacterial attachment by >80%, and inhibited the development of thick biofilms. QCM-D results revealed that the EPS molecules penetrate between the chains of the brush and adsorb onto the polystyrene surface. Additionally, AFM analyses showed that the brush-like monolayer prevents the adhesion of large (> d) hydrophilic colloids onto the surface via hydration repulsion; however, molecules or colloids small enough to fit between the brush polymers (< d) were able to be adsorbed onto the surface via van der Waals interactions. Overall, we found that the penetration of extracellular organelles, as well as biopolymers through the brush, is critical for the failure of the antifouling coating, and likely could be prevented through tuning of the brush density. Stability and biofilm development testing on multiple surfaces (polypropylene, glass, and stainless steel) support practical applications of this novel block copolymer.

Synthesis and properties of benzocyclobutene-terminated imide-containing cyano group

Benzocyclobutene (BCB) resins have aroused much interest because of their excellent physical and chemical properties. Unfortunately the temperature required to induce cross-linking in typical BCBs is higher than 250°C, which restricts their applications. In this study, a novel cyano-containing BCB-terminated imide monomer was synthesized through the reaction of 1-cyano-5-amino-benzocyclobutene with 4,4′-oxydiphthalic anhydride. This monomer allows a 50–100°C lower curing temperature in comparison with typical BCBs, and it is highly soluble in various solvents and can easily convert to cured film at 150–200°C. Because of the presence of rigid imide group and strong polar cyano group, the cured film exhibits excellent mechanical strength with tensile strength up to 87.8 MPa, high glass transition temperature up to 350°C, low coefficient of thermal expansion (36.9 ppm K−1), and outstanding planarity with the average surface roughness as low as 0.26 nm.

Extractable Free Polymer Chains Enhance Actuation Performance of Crystallizable Poly(ε-caprolactone) Networks and Enable Self-Healing

Crosslinking of thermoplastics is a versatile method to create crystallizable polymer networks, which are of high interest for shape-memory actuators. Here, crosslinked poly(ε-caprolactone) thermosets (cPCLs) were prepared from linear starting material, whereby the amount of extractable polymer was varied. Fractions of 5⁻60 wt % of non-crosslinked polymer chains, which freely interpenetrate the crosslinked network, were achieved leading to differences in the resulting phase of the bulk material. This can be described as "sponge-like" with open or closed compartments depending on the amount of interpenetrating polymer. The crosslinking density and the average network chain length remained in a similar range for all network structures, while the theoretical accessible volume for reptation of the free polymer content is affected. This feature could influence or introduce new functions into the material created by thermomechanical treatment. The effect of interpenetrating PCL in cPCLs on the reversible actuation was analyzed by cyclic, uniaxial tensile tests. Here, high reversible strains of up to ∆ε = 24% showed the enhanced actuation performance of networks with a non-crosslinked PCL content of 30 wt % resulting from the crystal formation in the phase of the non-crosslinked PCL and co-crystallization with network structures. Additional functionalities are reprogrammability and self-healing capabilities for networks with high contents of extractable polymer enabling reusability and providing durable actuator materials.

Core-crosslinked diblock terpolymer micelles – taking a closer look on crosslinking efficiency

We present an in-depth study on the crosslinking of diblock terpolymer micellar cores.

Directed Self-Assembly of Liquid-Crystalline Molecular Building Blocks for Sub-5 nm Nanopatterning

The thin-film directed self-assembly of molecular building blocks into oriented nanostructure arrays enables next-generation lithography at the sub-5 nm scale. Currently, the fabrication of inorganic arrays from molecular building blocks is restricted by the limited long-range order and orientation of the materials, as well as suitable methodologies for creating lithographic templates at sub-5 nm dimensions. In recent years, higher-order liquid crystals have emerged as functional thin films for organic electronics, nanoporous membranes, and templated synthesis, which provide opportunities for their use as lithographic templates. By choosing examples from these fields, recent progress toward the design of molecular building blocks is highlighted, with an emphasis on liquid crystals, to access sub-5 nm features, their directed self-assembly into oriented thin films, and, importantly, the fabrication of inorganic arrays. Finally, future challenges regarding sub-5 nm patterning with liquid crystals are discussed.

Micellization of Photo-Responsive Block Copolymers

This review focuses on block copolymers featuring different photo-responsive building blocks and self-assembly of such materials in different selective solvents. We have subdivided the specific examples we selected: (1) according to the wavelength at which the irradiation has to be carried out to achieve photo-response; and (2) according to whether irradiation with light of a suitable wavelength leads to reversible or irreversible changes in material properties (e.g., solubility, charge, or polarity). Exemplarily, an irreversible change could be the photo-cleavage of a nitrobenzyl, pyrenyl or coumarinyl ester, whereas the photo-mediated transition between spiropyran and merocyanin form as well as the isomerization of azobenzenes would represent reversible response to light. The examples presented cover applications including drug delivery (controllable release rates), controlled aggregation/disaggregation, sensing, and the preparation of photochromic hybrid materials.