Biomechanical cadaver testing of a fixed-angle plate in comparison to tension wiring and screw fixation in transverse patella fractures

Clinical and functional outcomes of locked plating vs. cerclage compression wiring for AO type C patellar fractures- a retrospective single-center cohort study

PURPOSE

Although "tension-band wiring" is still commonly used to stabilize patellar fractures, the technique has recently been scrutinized due to biomechanical insufficiency. Consequently, the AO Foundation renamed the principle to compression cerclage wiring (CCW). Several studies propose favorable outcomes when utilizing locked plating (LP). This study aims to compare outcome of CCW and LP for complex patellar fractures.

METHODS

A retrospective, single-center cohort study was performed on patients who underwent operative treatment for (AO 34 C-Type) patellar fractures between April 2013 and March 2023. Patients with a 12 month follow up were included. We grouped and compared patients based on the applied treatment strategy: group LP vs. group CCW. Primary outcome parameters included implant-related complications and revision surgeries. Secondary outcomes were length of stay, return to work and 12 months functional outcome (Lysholm score). Odd ratios for complications and revisions were calculated using the conditional Maximum Likelihood Estimate. The threshold for statistical significance was set at p < 0.05.

RESULTS

Of 145 patients, 63 could be included (group LP: n = 23 and group CCW: n = 40). Fractures in group LP were significantly more complex in regard to AO Classification (p < 0.001), number of fragments (p < 0.001) and degree of comminution (p < 0.001), yet odds of complications were significantly lower in group LP (OR: 0.147; 95%CI: 0.015-0.742; p = 0.009). K-wire migration was the most common complication in group CCW (20%). Odds of revision surgery were significantly lower in group LP (OR: 0.000; 95%CI: 0.000-1.120; p = 0.041). The average Lysholm score at one year was favorable in both groups (89.8; SD: 11.9 in group LP and 90.6; SD: 9.3 in group CCW; n.s.).

CONCLUSION

In our study cohort, LP was routinely chosen for more complex fracture morphologies; nevertheless the data implies that LP may be considered as the superior fixation technique in regard to complications and revision operations. Especially, K-wire migration occurs frequently after CCW. The one year functional outcome was comparable between the groups, with both demonstrating good results. Prospective randomized studies are indicated to validate our findings.

An innovative anti-rotation tension band wiring for treating transverse patellar fractures: finite element analysis and mechanical testing

BACKGROUND

The displacement and rotation of the Kirschner wire (K-wire) in the traditional tension band wiring (TBW) led to a high rate of postoperative complications. The anti-rotation tension band wiring (ARTBW) could address these issues and achieve satisfactory clinical outcomes. This study aimed to investigate the biomechanical performance of the ARTBW in treating transverse patellar fracture compared to traditional TBW using finite element analysis (FEA) and mechanical testing.

METHODS

We conducted a FEA to evaluate the biomechanical performance of traditional TBW and ARTBW at knee flexion angles of 20°, 45°, and 90°. Furthermore, we compared the mechanical properties under a 45° knee flexion through static tensile tests and dynamic fatigue testing. The K-wire pull-out test was also conducted to evaluate the bonding strength between K-wires and cancellous bone of two surgical approaches.

RESULTS

The outcome of FEA demonstrated the compression force on the articular surface of ARTBW was 28.11%, 27.32%, and 52.86% higher than traditional TBW at knee flexion angles of 20°, 45°, and 90°, respectively. In mechanical testing, the mechanical properties of ARTBW were similar to the traditional TBW. In the K-wire pull-out test, the pull-out strength of ARTBW was significantly greater than the traditional TBW (111.58 ± 2.38 N vs. 64.71 ± 4.22 N, P < 0.001).

CONCLUSIONS

The ARTBW retained the advantages of traditional TBW, and achieved greater compression force of articular surface, and greater pull-out strength of K-wires. Moreover, ARTBW effectively avoided the rotation of the K-wires. Therefore, ARTBW demonstrates potential as a promising technique for treating patellar fractures.

Dorsal Hook Plating of Patella Fractures With Immediate Range of Motion Results in Reliable Fixation, Low Implant Removal Rates, and Satisfactory Clinical Outcomes

OBJECTIVES

To evaluate radiographic and clinical patient-reported outcomes following dorsal hook plating of displaced patella fractures with permittance of immediate postoperative active closed chain range of motion.

METHODS

DESIGN

Retrospective review of prospectively collected data.

SETTING

Urban academic level 1 trauma center.

PATIENT SELECTION CRITERIA

Adult patients with displaced patella fractures (OTA/AO 34C1-3) who underwent dorsal plating with immediate range of motion between 2018 and 2023.

OUTCOME MEASURES AND COMPARISONS

Numerical Rating Scale for Pain, Knee Outcome Score (KOS-ADL), Tegner-Lysholm score, radiographic union, and wound complications were collected.

RESULTS

Sixty-one patients were included (47 female) with an average age of 63 years (SD 14.7, range 22-86 years). The mean BMI was 24.2 (SD 3.6, range 16.6-33.3). There were 13 34-C2 and 48 34-C3 fractures. All but 2 patients (96.7%) achieved bony union after the index procedure. 89% (n = 54) of patients completed outcome surveys with at least 6-month follow-up. Six patients (9.8%) underwent removal of plate implant at a mean of 15.1 months postoperatively. The mean KOS-ADL score was 91.4, the mean Tegner-Lysholm score was 78.1, and the mean NRS was 2.7.

CONCLUSIONS

Dorsal hook plating offers secure fixation to allow early range of motion, reliable fixation with low nonunion and implant failure rates, low implant removal rates, and satisfactory patient-reported outcomes.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Transverse patella fracture fixation: A cadaveric biomechanical comparison of cannulated screws and anterior tension band versus low-profile, multiplanar mesh plating

INTRODUCTION

Multiplanar mesh plating of patella fractures has become more popular in recent years. It was the goal of this study to compare the biomechanical stability of cannulated screw with anterior tension band to multiplanar mesh plating for fixation of transverse patella fractures in cadaver specimens.

MATERIALS AND METHODS

Eight matched pairs of fresh frozen cadaveric knees were obtained and soft tissues dissected leaving the extensor mechanism, joint capsule, and retinaculum intact. Transverse fractures were created at the mid-portion of the patella. For each pair, one specimen was repaired using cannulated screws with anterior tension band, and the second was repaired using multiplanar mesh plating. Each specimen underwent cyclic extension loading with loads increasing by 1.1 kg after every 50 cycles. Interfragmentary displacement was measured at the end of each interval at both 5° and 45° of knee flexion angle, with fixation failure defined by >2 mm displacement.

RESULTS

The specimens fixed with multiplanar mesh plating survived more cycles and higher loads than the specimens fixed with cannulated screws with anterior tension band (p = 0.011 comparing survival plots). After 150 cycles of extension loading, 3 of 8 of the specimens fixed with screws/tension band had failed, whereas none of the mesh plated specimens had failed. After 400 cycles, 7 of 8 of the screws/tension band had failed, whereas half of the mesh plated specimens had failed.

CONCLUSIONS

While a more technically challenging and expensive technique, mesh plating for patella fractures appears to offer greater durability than traditional cannulated screw with tension banding.

Lateral rim variable angle locked plating versus tension band wiring of simple and complex patella fractures: a biomechanical study

INTRODUCTION

Treatment of both simple and complex patella fractures is a challenging clinical problem. Although tension band wiring has been the standard of care, it can be associated with high complication rates. The aim of this study was to investigate the biomechanical performance of recently developed lateral rim variable angle locking plates versus tension band wiring used for fixation of simple and complex patella fractures.

MATERIALS AND METHODS

Sixteen pairs of human anatomical knees were used to simulate either two-part transverse simple AO/OTA 34-C1 or five-part complex AO/OTA 34-C3 patella fractures by means of osteotomies, with each fracture model created in eight pairs. The complex fracture pattern was characterized by a medial and a lateral proximal fragment, together with an inferomedial, an inferolateral, and an inferior (central distal) fragment mimicking comminution around the distal patellar pole. The specimens with simple fractures were pairwise assigned for fixation with either tension band wiring through two parallel cannulated screws or a lateral rim variable angle locking plate. The knees with complex fractures were pairwise treated with either tension band wiring through two parallel cannulated screws plus circumferential cerclage wiring or a lateral rim variable angle locking plate. Each specimen was tested over 5000 cycles by pulling on the quadriceps tendon, simulating active knee extension and passive knee flexion within the range of 90° flexion to full extension. Interfragmentary movements were captured via motion tracking.

RESULTS

For both fracture types, the articular displacements measured between the proximal and distal fragments at the central patella aspect between 1000 and 5000 cycles, together with the relative rotations of these fragments around the mediolateral axis were all significantly smaller following the lateral rim variable angle locked plating compared with tension band wiring, p ≤ 0.01.

CONCLUSIONS

From a biomechanical perspective, lateral rim variable angle locked plating of both simple and complex patella fractures provides superior construct stability versus tension band wiring under dynamic loading.

Comparative study of locking neutralization plate construct versus tension band wiring with a cannulated screw for patella fractures: experimental and finite element analysis

Transverse patella fractures, accounting for approximately 1% of Orthopedic injuries, pose intricate challenges due to their vital role in knee mechanics. This study aimed to compare the biomechanical performance of a construct, integrating cannulated screws and an anterior locking neutralization plate, with the conventional tension band wiring technique for treating these fractures. Experimental testing and Finite Element Analysis were employed to evaluate the constructs and gain profound insights into their mechanical behavior. Sixteen cadaveric knees were prepared, and transverse patella fractures were induced at the midpoints using a saw. The plate construct and tension band wire fixation were randomly assigned to the specimens. A cyclic test evaluated the implants' durability and stability, simulating knee movement during extension and flexion. Tensile testing assessed the implants' maximum failure force after cyclic testing, while Finite Element Analysis provided detailed insights into stress distribution and deformation patterns. Statistical analysis was exclusively performed for the experimental data. Results showed the plate enhanced stability with significantly lower deformation (0.09 ± 0.12 mm) compared to wire fixation (0.77 ± 0.54 mm) after 500 cycles (p = 0.004). In tensile testing, the construct also demonstrated higher failure resistance (1359 ± 21.53 N) than wire fixation (780.1 ± 22.62N) (p = 0.007). Finite Element Analysis highlighted distinct stress patterns, validating the construct's superiority. This research presents a promising treatment approach for transverse patella fractures with potential clinical impact and future research prospects. This study presents a promising advancement in addressing the intricate challenges of transverse patella fractures, with implications for refining clinical practice. The construct's improved stability and resistance to failure offer potential benefits in postoperative management and patient outcomes.

Can multiple miniplates improve the treatment of comminuted patellar fracture?

BACKGROUND

We have applied primarily multiple locking compression miniplates in treating multifragmentary, comminuted patellar fracture in combination with conventional fixation methods.

METHODS

Medical and radiologic data were retrospectively reviewed for the patients surgically fixated with locking compression miniplates in patellar fracture of AO/OTA 34-C3. The primary outcome was bone union at the final follow-up, and the secondary outcomes were functional outcomes and postoperative complications associated with the procedure. For the functional assessment, the Lysholm score, Tegner scores, and the knee range of motion was compared.

RESULTS

A total of twenty patients with AO/OTA 34-C3 patellar fracture were included in the study with an average follow-up period of 15 months (range:11 ~ 18 months) between June 2018 and November 2021. Eleven male and nine female patients presented an average age of 57.15 years. The primary fracture union was seen in all twenty patients, and the average time to the union was 15.6 weeks on serial radiograph follow-up. All patients did not show any postoperative complications, such as fixation failure, infection, or revision operations. Postoperatively, all patients achieved an average range of motion of 130 degrees, and the Lysholm and Tegners scores showed an average of 90.4 and 5.0 at the final follow-up, retrospectively.

CONCLUSION

Fixations with miniplates in comminuted patellar fractures can be a useful option for effective osteosynthesis due to their versatile, efficient, and low-profile nature.

Patella Fracture Fixation With Novel Wagon Wheel Construct Versus Tension-Band Construct: A Technical Trick

SUMMARY

Internal fixation of patella fractures remains technically challenging. Cannulated screws with an anterior tension band have been associated with high rates of implant prominence, and fracture comminution can make appropriate application of a tension band impractical. We present the results of a novel technique using a transtendinous/transligamentous mini-fragment plate positioned peripherally around the patella with radially directed screws: termed the wagon-wheel (WW) construct. Compared with a cohort of fractures treated with cannulated screws with an anterior tension band, there was no difference in final range of motion and rate of nonunion. The WW construct had a significantly decreased incidence of symptomatic implants (5% vs. 32%, P = 0.02), rate of reoperation (9% vs. 38%, P = 0.018), dependency on gait aids (10% vs. 38%, P = 0.031), and a faster time to union (HR: 2.2; 95% CI, 1.28-3.95, P = 0.005). In summary, the WW was designed with the goal of obtaining peripheral plate fixation to maximize fragment-specific fixation while minimizing implant prominence. Patients treated with the WW demonstrated reduced rates of implant prominence and reoperation.

Novel screw-cable integrated system(SCIS) for minimally invasive treatment of patella transverse fractures: a finite element analysis

BACKGROUND

The most recommended method for treating transverse patella fractures is modified tension band wiring (MTBW). However, the optimal instrument for use with MTBW is still undetermined. Hence, we aimed to design a novel screw-cable integrated system (SCIS) and compare its biomechanical characteristics with Kirschner-wire, SCIS, and Cable-Pin systems in treating transverse patellar fracture.

METHODS

A finite-element (FE) model of transverse patella fracture was created. The fracture model was fixed with either K-wire, SCIS, or Cable-pin. Different tension force loading (400 N and 800 N), direction(0° and 45°), and screw or K-wire depth(5 mm and 10 mm) were set. The maximum displacement of the fragment and maximum gap opening were measured by using FE analysis.

RESULTS

Compared with the K-wire and Cable-pin system, SCIS increased the stability of the fractured patella by reducing fragment displacement and gap opening. Under 400 N loading in the direction 45°, SCIS with screw placing at 5-mm depth reduced the maximum fragment displacement (0.43 mm) by 49.62% and 26%, respectively, compared with the K-wire (0.22 mm) and Cable-pin (0. 22 mm) group. Meanwhile, the gap opening in SCIS (0.05 mm) was reduced by 83% and 59.8% (0.05 to 0.18) compared with the K-wire (0.30 mm) and Cable-pin (0.18 mm) group.

CONCLUSION

SCIS demonstrated improved biomechanical stability for treating transverse patellar fractures compared to MTBW with Kirschner wire and the Cable-Pin system. Finite element analysis showed SCIS substantially reduced fracture fragment displacement and gap opening under various loading conditions.

[Anterior plate osteosynthesis for multifragmentary patella fracture with additive stabilization of the distal pole using suture cerclage]

OPERATION GOAL

The aims of the surgical treatment are the anatomical reduction of the articular surface and stabilization of a multifragmentary patella fracture with a distal pole fragment using plate osteosynthesis and additive suture tape cerclage to secure the distal fragment.

INDICATION

Demonstration of the surgical procedure for a multifragmentary patella fracture in the knee joint of a male cadaver.

SURGICAL TECHNIQUE

Start with a median prepatellar skin incision and splitting of the bursa and surrounding fascia. Lateral arthrotomy with proximal and distal extension for complete eversion and articular exposure of the multifragmentary fracture. The fracture is then reduced from the articular side using temporary K‑wire fixation and reduction clamps, followed by screw osteosynthesis of the large fragments (e.g., distal and proximal poles). After selection of the plate it is fixed with locking screws. In addition, a suture cerclage according to Krakow and/or McLaughlin is applied distally and transosseously through the tibial tuberosity and proximally through the quadriceps tendon. The knotting of the McLaughlin suture cerclage should be done in 90° flexion of the knee joint.

POSTOPERATIVE TREATMENT

Functional postoperative treatment with hard shell orthesis with movement limitation (30°, 60° and 90° for 2 weeks each) and partial weight bearing of 15-20 kg for 6 weeks is recommended. Full weight-bearing is only allowed in full extension.

EVIDENCE

Plate osteosynthesis is biomechanically superior in comparison to the widely used tension band osteosynthesis. In multifragmentary fractures, additional augmentation with a suture tape cerclage seems to be appropriate. Due to the lack of study results there is currently no clinical evidence for this.

Anterior variable-angle locked plating versus tension band wiring of simple and complex patella fractures - a biomechanical investigation

BACKGROUND

The aim of this study was to investigate the biomechanical performance of novel anterior variable-angle locking plates versus tension band wiring used for fixation of simple and complex patella fractures.

METHODS

Sixteen pairs of human cadaveric knees were used to simulate two-part simple transverse AO/OTA 34-C1 and five-part complex AO/OTA 34-C3 patella fractures. The complex fracture pattern was characterized with a medial and a lateral proximal fragment, together with an inferomedial, an inferolateral and an inferior fragment mimicking comminution around the distal patella pole. Eight pairs with simple fractures were split for fixation via either tension band wiring (TBW) through two parallel cannulated screws or anterior variable-angle locked plating, whereas other eight pairs with complex fractures were split for either TBW through two parallel cannulated screws plus circumferential cerclage wiring, or anterior variable-angle locked plating using a cortical caudo-cranial polar screw. Each specimen was tested over 5000 cycles with a range of motion from 90° flexion to full extension by pulling on the quadriceps tendon. Interfragmentary movements were captured by motion tracking.

RESULTS

For both fracture types, the longitudinal and shear articular displacements, measured between the proximal and distal fragments at the central patella aspect between 1000 and 5000 cycles, together with the relative rotations of these fragments around the mediolateral axis were all significantly smaller following anterior variable-angle locked plating versus TBW, p ≤ 0.01.

CONCLUSIONS

From a biomechanical perspective, anterior locked plating of both simple and complex patella fractures resulted in less interfragmentary displacement under extended cyclic loading.

3D reduction combined with the modified Kirschner-wire tension band for the treatment of comminuted patella fracture

PURPOSE

A novel 3D reduction method combined with a modified Kirschner-wire tension band (3D MKTB) fixation method to treat comminuted patella fractures was introduced in this study. This study aims to evaluate the effectiveness and practicality of this novel technology.

METHODS

This study is a retrospective case series study. Twenty-eight patients with closed comminuted patella fractures were treated with the novel 3D MKTB fixation method. Radiographs of the knee were obtained at the routine follow-up to assess fracture healing and widening of the articular step-off. Clinical outcomes including the degree of pain on a visual analogue scale (VAS), range of motion, Lysholm, and Bostman grading scales were measured at the last follow-up. The mean follow-up was 39.8 ± 10.5 (range 26-62) months.

RESULTS

All patients had bony union at a mean of 11.4 ± 1.4 (range 9-14 weeks) weeks based on X-ray. No patient had evidence of internal fixation failure. Only two patients suffered from surgical complication. One patient suffered from postoperative superficial infection, and one patient suffered from internal fixation irritation. Articular step-off larger than 2 mm was not seen in any cases. The average VAS-related pain score was 0.5 ± 0.5 (range 0-1) points. The average range of motion was 0-138.6° ± 11.9° (range 90°-155°), all patients had full knee extension. The mean Lysholm and Bostman scores were 92.9 ± 3.5 (range 86-100 points) points and 28.5 ± 1.3 (range 24-30 points) points, respectively.

CONCLUSION

The novel 3D reduction technique combined with the modified Kirschner-wire tension band technique is an effective, safe, and simple treatment option for comminuted patella fractures.

LEVEL OF EVIDENCE

IV.

Developments in the epidemiology and surgical management of patella fractures in Germany

BACKGROUND

Patella fractures account for approximately 1% of all skeletal injuries. Treatment options are vast and no definitive conclusion on what option is the most beneficial could be made so far. Plate osteosynthesis appears to gain in importance. We aim to give insight into the more recent trends and developments as well as establish the epidemiology of patella fractures in Germany by analysing treatment and epidemiological data from a national database.

METHODS

Anonymised data was retrieved form a national database. In the period of 2006 to 2020, all patients with patella fractures as defined in ICD-10 GM as their main diagnosis, who were treated in a German hospital were included. Patients were divided into subgroups based on gender and age. Age groups were created in 10-year intervals from 20 years old up to 80 years old with one group each encompassing all those above the age of 80 years old and below 20 years old and younger. Linear regression was performed were possible to determine statistical significance of possible trends.

RESULTS

A total of 151,435 patellar fractures were reported. 95,221 surgical interventions were performed. Women were about 1.5 times more likely to suffer from patella fracture than men. The relative number of surgical interventions rose from about 50% in 2006 to 75% in 2020. Most surgical interventions are performed in those over the age of 50. The incidence of complex fractures and plate osteosynthesis has significantly increased throughout the analysed period.

CONCLUSIONS

We found a clear trend for surgical treatment in Germany with an increase in surgical procedures. We could also show that this ratio is age-related, making it more likely for younger patients in the age groups from 0 to 70 years old to receive surgical treatment for their patella fracture.

Transosseous suture versus suture anchor fixation for inferior pole fractures of the patella in osteoporotic bone: a biomechanical study

BACKGROUND

The surgical treatment of inferior patellar pole fractures can be a challenge, especially in geriatric patients, who are particularly frequently affected by osteoporosis. The objective of this biomechanical study was to compare the performance of suture anchor and transosseous suture fixation in fractures of the inferior patellar pole in context of bone mineral density.

METHODS

Twelve fresh-frozen human cadaveric knees received a transverse osteotomy, simulating an AO/OTA 34C1.3 inferior pole fracture of the patella. These fractures were fixated with either suture anchors (SA; Corkscrew® FT 4.5 mm) or transosseous suture (TS; #2 FiberWire®). Cyclic loading tests were performed by pulling the quadriceps tendon against gravity from 90° flexion to almost full extension (5°) for 1000 cycles. Motion and fracture gap displacement were tracked until failure occurred. Subsequently, loading to failure tests followed. Differences between groups were compared using unpaired t-tests, and correlations were calculated with Pearson's correlation coefficient.

RESULTS

The suture anchor group showed significantly fewer cycles to failure than the transosseous suture group (SA: 539.0 ± 465.6 cycles, TS: 1000 ± 0 cycles, P = 0.04). Bone mineral density correlated positively with cycles to failure in the suture anchor group (Pearson's r = 0.60, P = 0.02). No differences in fracture gap displacement could be proven after 100 cycles (SA: 4.1 ± 2.6 mm, TS: 6.5 ± 2.6 mm, P = 0.19); 500 cycles (SA: 6.4 ± 6.1 mm, TS: 9.6 ± 3.8 mm, P = 0.39); and 1000 cycles (SA: 4.0 ± 0.4 mm, TS: 11.0 ± 4.5 mm, P = 0.08). Furthermore, the mean destructive load to failure in the suture anchor group was also significantly lower than in the transosseous suture group (SA: 422.4 ± 212.2 N, TS: 825.7 ± 189.3 N, P = 0.04).

CONCLUSIONS

Suture anchors may be a viable alternative to transosseous suture in younger patients for clinical advantages, but in osteoporotic bone, the more stable osteosynthesis with transosseous suture continues to prove superior. Therefore, trauma surgeons might consider the use of transosseous suture in elderly patients, especially in those presenting with low bone mineral density values.

Adjunct neutralization plating in patella fracture fixation: a technical trick

Patella fracture outcomes are positive overall; however, in some cases, traditional fixation methods result in complications, including loss of fixation and irritable hardware requiring removal. We present a technique of plate fixation that we believe has the potential to improve stability and is less offensive in more comminuted fracture patterns. Improved stability should allow unfettered advancement of rehabilitation without concern for loss of fixation. Lower profile fixation offers a potential for diminishing the presence of irritating hardware requiring removal. We present our technique for using plate fixation to augment more complex patella fracture patterns.

Anterior Locking Plate Osteosynthesis of Patellar Factures - Analysis of Complications and Functional Outcome

BACKGROUND

Tension band wiring is the standard procedure for patellar fractures, but is associated with a high rate of implant related complications and implant failure. Tension band wiring may fail, especially with multifragmentary and comminuted fractures. Plate fixation of complex patellar fractures seems to be superior to wiring, both clinically and biomechanically. The aim of this study was to evaluate complications after locking plate fixation in patellar fractures two years after surgery and to access the functional outcome.

MATERIAL AND METHODS

As part of a prospective case series, all patients who had received locking plate fixation of a patellar fracture between April 2013 and May 2018 were clinically examined two years postoperatively and potential complications were evaluated.

RESULTS

A total of 38 patients aged 19 - 87 years were included. Complications occurred in a total of five patients (13%), including one reactive prepatellar bursitis, one chronic infection and loss of reduction due to a dislocated pole fragment in three cases. The average active range of motion of the affected knee joint two years postoperatively was 133°. The Tegner activity scale score reached 3 points, the Lysholm score 95 points and the Kujala score 95 points.

CONCLUSION

With an overall relatively low complication rate and good clinical outcome, dislocated distal pole fragments are a common complication after plate fixation of patellar fractures. If preoperative diagnostic testing shows a pole fragment, a modified hook-plate can be used, with the possibility of fixing the pole fragment.

Suture tension band fixation vs. metallic tension band wiring for patella fractures - A biomechanical study on 19 human cadaveric patellae

PURPOSE

Traditional tension band fixation of patella fracture is associated with high reoperation rates. The purpose of the study was to assess strength of fixation in patella fractures treated with either a non-metallic all suture-based technique or traditional metallic tension band wiring.

METHODS

Ten paired human cadaveric specimens were included. A transverse fracture was created, reduced and fixated with a non-metallic or metallic approach. Non-metallic fixation was done according to a previously published technique, metallic fixation was done according to AO description. Specimens were fixed in 90° of flexion and underwent 200 cycles of loading by pulling the Quadriceps tendon to 300 Newton. Fracture displacement was optically monitored. Primary outcome was fracture displacement after 200 cycles compared to the first cycle. Subsequently, load-to-failure was assessed by a monotonic pull to 1000 N.

RESULTS

For cyclic loading analysis, one specimen from each group was excluded due to machine synchronization, resulting in a total population of 18 specimens. Median (min-max) fracture displacement was 0.65 mm (0.06-1.3) in the non-metallic group and 0.68 mm (0-1.23), (p=0.931) in the metallic group. No difference in displacement was found between the two groups in the repeated measures analysis of variance (p=0.5524). For load-to-failure analysis one specimen was excluded due to machine synchronization, resulting a total population of 19 specimens. 2/9 specimens failed in the non-metallic group (at 979 and 635 N) and 2/10 failed in the metallic group (745 and 654 N).

CONCLUSION

Non-metallic technique is a biomechanically viable alternative to traditional tension band fixation and it can hopefully lead to fewer implant-related complications.

Vertical Patella Fracture Fixed by Plate and Screws With Bone Graft: A Case Report

Fractures of the patella constitute approximately 1% of all skeletal injuries. The vertical pattern represents 12-17% and the open patella fracture represents 6-30%. We here represent a rare case constituting the presence of these two uncommon (vertical type patella fracture with depression of articular surface). A 22-year-old male had a close patella fracture after a road traffic accident. The fracture was classified as a vertical and comminuted pattern. A back slab above the knee was applied and then the patient was prepared for surgery. Open reduction and internal fixation of the patella by miniplate and bone graft restore the articular surface, which reduces the risk of post-traumatic osteoarthritis. At five months postoperatively, the patient had a satisfactory joint motion with full extension and 120° of joint flexion and returned to his daily life activities without restriction. Additionally, the patient was in good health and able to bear full weight. In conclusion, the treatment choice requires a thorough knowledge of the case to ensure good stability and avoid fracture displacement.

Fracture-related infection of the patella: Treatment options and outcome

BACKGROUND

Fracture-related infection (FRI) after the operative management of patella fractures is a serious complication that can result in prolonged hospitalization, multiple revision procedures and permanent functional impairment. Till today, treatment modalities and outcome of FRI of the patella are not well described. Therefore, the main objective of this retrospective cohort study was to evaluate treatment options, functional outcome and healthcare costs related to FRI of the patella.

METHODS

This study evaluated 111 consecutive patients that were surgically treated for patella fractures, at the department of trauma surgery of the University Hospitals Leuven (Belgium), between January 2015 and April 2020. Patients were excluded if they (1) were younger than 18 years at the time of injury or (2) died during follow up. The minimal follow-up for all patients was 18 months.

RESULTS

During the 5-year study period, 107 patients with 108 patella fractures were included. A total of 10 patients were diagnosed with an FRI (9.3%). Four of these were treated with a DAIR approach and three patients underwent implant removal or exchange. Finally, three patients were treated with total patellectomy. Out of the 10 patients, two were diagnosed with a recurrence of infection. Overall, we observed substantial lower scores for all Knee Injury and Osteoarthritis Outcome Score subscales in the FRI group, compared to a reference population. Moreover, our study shows that direct hospital-related healthcare costs of FRI of the patella were nine times higher compared to non-FRI cases.

CONCLUSIONS

FRI of the patella is a challenging complication and recurrence of infection not uncommon. Although multiple treatment modalities exist, a multidisciplinary patient-specific approach is crucial. An early or delayed onset infection can be managed with a DAIR approach, but only when the construct is stable and the soft tissue coverage adequate. In patients with an FRI, implant removal is preferred when the fracture has healed. A total patellectomy can be used as a salvage procedure in complex cases with acceptable functional results. Overall, FRI of the patella leads to both a negative impact on the functional status of the patient and a ninefold increase in total healthcare costs.

Outcomes for a custom-made anchor-like plate combined with cerclage in the treatment of inferior pole patellar fracture

Objective

An inferior pole fracture of the patella requires surgical treatment to restore the knee extension mechanism of the knee joint. Different from other types of patellar fractures, inferior pole fractures are usually comminuted, and other traditional fixation methods, such as tension band wiring, may not meet the fixation needs. We propose fixing inferior pole fractures of the patella with a custom-made anchor-like plate combined with cerclage and report the surgical outcomes.

Material and methods

This is a retrospective clinical study. From June 2018 to August 2020, 21 patients with inferior patella fracture treated at Hong Hui Hospital Affiliated to Xi’an Jiaotong University received a custom-made anchor-like plate combined with cerclage. Complications of the surgical fixation methods and final knee function were used as the main outcome measures.

Results

All fractures achieved good union, and the union time ranged from 8 to 12 weeks. No patients had serious complications, such as internal fixation failure or infection. The average duration of surgery of patients was 75.05 7.26 min, and the intraoperative blood loss was 60.099.49 ml. At the last follow-up, the range of motion of the knee was 120°-140°, with an average of 131.436.92°, the Bostman score was 27–30, and the Lysholm score ranged from 82 to 95. All patients showed good knee function one year after the operation.

Conclusion

We used a modified T-shaped plate combined with cerclage technology to fix inferior fractures pole of the patella, providing reliable fixation, allowing early functional exercise of the knee joint, and providing patients with good knee joint function after surgery.

A New Antirotation Strategy of K-Wire Tension Band Therapy for Patellar Fracture

Background

Patellar fracture is a common phenomenon observed in orthopedic clinics. Many methods have been shown to be effective in the fixation of patellar fracture. However, there are few studies on the antirotation effect of these methods. The purpose of this study is to present a new strategy of K-wire tension band therapy for patellar fracture and explore the antirotation effect of the modified tension band method on patellar fracture.

Methods

A retrospective clinical observation study was conducted on 75 patients with patellar fracture. Totally, 46 patients were enrolled to the traditional group, who received the traditional K-wire tension band therapy. The modified group included 29 patients on whom our new strategy was implemented. The operation time, intraoperative blood loss, and fracture healing time were collected to compare the two operations and the knee society score (KSS) scores after the operations, and complications were recorded and retrieved to indicate the effectiveness of the two treatments.

Results

The preoperative baseline data (gender, age, fracture types) of the two groups showed no significant statistical difference. Similarly, there was no significant difference in the operation time, intraoperative blood loss, and fracture healing time between the two groups. The KSS clinical scores 1 year after operation was 90 (84, 95) for the traditional group as compared with 99 (97, 100) for the modified group (p < 0.05). The KSS functional scores 1 year after operation in the two groups were 90 (65, 90) and 100 (90, 100) (p < 0.05). The incidences of complications due to the rotation of K-wires in the traditional group and the modified group were 76.1% (35 of 46) and 6.9% (2 of 29) with a significant statistical difference (p < 0.05).

Conclusion

This study shows that our modified tension band therapy is an effective strategy for antirotation in the treatment of patellar fracture and proves that it can achieve better clinical outcomes than the traditional K-wire tension band method. This new strategy may be a safe and effective clinical technique for the treatment of patellar fracture. However, more prospective randomized controlled trials with larger sample sizes are still needed to further prove its efficacy.

Prospective Comparative Study of Fixing Displaced Transverse Patellar Fracture by Tension Band Wiring Versus Cannulated Screws with Wiring

BACKGROUND: Transverse fractures of the patella are important fractures with a wide variety of subtypes, the common incidence in the age group of 20–50 years. Surgical interference aims to achieve a perfect alignment of the joint surface, in addition to rigid fixation of the fracture for early re-habitation and early movement to retain the extensor mechanism of the knee joint. AIM: The aim of this study was to compare the radiological and functional outcomes of the displaced transverse patella fracture in adult patients treated by ORIF using tension band wiring versus cannulated screws with wiring. METHODS: A prospective analytic comparative study was conducted in Al-Kindy Teaching Hospital/Baghdad/Iraq for 18 months from April 1, 2019, to October 1, 2020. It included 32 patients with isolated displaced transverse patellar fracture AO type 34-C1. The patients have undergone operative fixation with two different surgical techniques divided randomly by choosing every other patient into two groups. Group A, the fracture was fixed by cannulated screws with wiring and Group B, the fracture was fixed by two K-wires and with tension band technique. Postoperatively, assessment of the knee function by Lysholm score, the visual analog scale for pain intensity, and active flexion range of movement were measured in degree as primary outcomes, while time to union in weeks assessed radiographically as secondary outcomes. RESULTS: The patients’ age was ranging from 26 to 49 years, with males predominant. Low-energy falls occupying a major part of the mechanism of injury in both groups. Lysholm score was significantly increased after 3, 6, and 12 months compared to that after 1 month in both groups with no statistical differences. The mean visual analog score significantly decreased in Group A after 1 month than that in Group B with no significant change in the other follow-up periods. There were no statistically significant differences in both groups regarding the range of knee movement and the radiographic assessment of fracture healing. CONCLUSION: Both techniques are good and effective with taking into consideration that open reduction and cannulated screws fixation with wiring technique is shown to be associated with lower post-operative pain and a lower frequency of complications mainly surgical site infection.

Influence of patella height after patella fracture on clinical outcome: a 13-year period

INTRODUCTION

The incidence of patella fracture is statistically low (0.5-1.5%) compared to other fractures of the extremities [Patella fractures 76(10):987-997, 2005]. In the latter research, patella fractures if treated surgically present an overall inferior functional outcome. Little is known about the influence of the postoperative patella height on the clinical outcome. Therefore, the aim of our study was to analyse the influence of the patella height on the patients' functional outcome after surgery.

METHODS

In this retrospective study the in-house trauma register of our level I University trauma center was screened for patients suffering patella fractures treated surgically. Patella height of the same patients was evaluated on lateral X-rays using the Insall-Salvati Ratio (ISR). The patients' X-rays were analyzed at two time points for the ISR, whereas group A presents ISR data right after surgery and group B data at the latest follow up (minimum 6 weeks). The change of mean ISR at both time points was tested for significance. The functional outcome was measured by the "Munich Knee Questionaire" (MKQ). These MKQ results of different patella heights and fracture types were compared.

RESULTS

The screening of our in-house trauma register revealed 375 patients between the years 2003 and 2016. Out of these 54 patients (34f, 20 m) were enrolled. In detail the follow-up time for ISR between group A and B accounted for a mean of 503.8 ± 655.7 days. The MKQ was assessed at a mean of 1367.0 ± 1042.8 days after surgery. According to the AO-classification 10% AO.34 type B and 90% AO.34 type C fractures were found. Group A showed in 9.1% a patella baja and in 27.3% a patella alta compared to group B presenting 20.0% patella baja and 14.5% patella alta. There was no significant difference in functional outcome referring to the MKQ in patella alta (MKQ 69.0% ± 18.2) or baja (MKQ 67.1% ± 17.9) (p = 0.9). No significant functional difference between AO34.type B (MKQ 74.5% ± 11.0) and AO34.type C fractures (MKQ 64.0% ± 15.0) resulted (p = 0.1).

CONCLUSION

Our results demonstrate that different postoperative patella heights apparently do not influence the functional outcome in the short follow-up.

Three-dimensional fracture mapping of multi-fragmentary patella fractures (AO/OTA 34C3)

Background

Multi-fragmentary patella fractures (MFPFs) are common patella fracture type. Low-profile plate fixation seems to be promising advancement in the treatment of such difficult fractures. There is no systematic morphologic study specifically for MFPFs to provide objective reference for the improvement of future implants and biomechanical models. This study aimed to delineate and quantify the location and spatial frequency of fracture lines, comminution zones, and coronal plane fragments in MFPFs using three-dimensional (3D) CT mapping technique.

Methods

A total of 187 MFPFs were retrospectively reviewed and analyzed. Fractures were digitally reconstructed from CT data, and fracture lines, comminution zones, and coronal fragments were graphically overlaid onto a 3D patella template. Fracture characteristics were summarized qualitatively based on the fracture maps and quantitatively on the counts and volume of each fragment. Furthermore, according to the classic fracture patterns concerning MFPFs, subgroup analysis was conducted.

Results

On average, we observed 7 fragments in each fracture, 3 of which were <1 cm³. Most fractures (81.2%) had coronal fragments on the anterior and/or posterior patella surfaces. We identified three classic patella fracture patterns: transverse with comminution, stellate, and “displaced comminuted” in 104, 54, and 29 knees, respectively. 3D maps demonstrated distinct distribution fracture patterns of fracture lines, comminution zones, and coronal fragments.

Conclusions

Supero-medial corner of the patella was seldomly involved, and might be used as the cornerstone for fixation. Coronal fragments were common on both anterior and posterior patella surfaces, justifying the application of anterior plate osteosynthesis characterized by multi-planar fixation. Comminution areas mainly concentrated in the lower half of the patella, potentially suitable for an implant in combination with sutures or circumferential cerclage wiring. The described 3D features of MFPFs could provide reference for the design of future implants and biomechanical models.

Patellar Fractures: Anatomy, Mechanics, and Surgical Management

➤

A preoperative computed tomography scan may be considered to improve surgical planning, as secondary fracture lines are poorly visualized on radiographs.

➤

Oblique internal and external rotation fluoroscopic views may be used intraoperatively to fully evaluate the medial and lateral facet articular reduction if direct assessment by visualization or palpation is not completed.

➤

Partial patellectomy for inferior pole fractures should be avoided, and bone-preserving procedures are recommended.

➤

A lateral arthrotomy may be used for direct visualization of the articular reduction for multifragmentary fractures. An inferomedial arthrotomy should be avoided to protect the dominant blood supply of the patella.

➤

Tension band fixation with cannulated screws yields a lower reoperation rate, improved functional outcome scores, and better performance in biomechanical studies than Kirschner wire-based tension band fixation.

➤

Preliminary studies of novel plate and screw constructs for osteosynthesis have shown promising results.

Suturing methods in prolapse surgery: a biomechanical analysis

INTRODUCTION

Pelvic organ prolapse is a common problem in urogynecological surgery. Abdominal and laparoscopic sacrocolpopexy is currently considered to be the gold standard of treatment. The main problem remains the anatomical point of fixation as well as how sutures are placed. We evaluated the biomechanical difference between an in-line ligament suture versus an orthogonal ligament suture and a single suture versus a continuous suture at the anterior longitudinal ligament in an in-vitro, sacrocolpopexy model.

METHODS

Biomechanical in-vitro testing was performed on human, non-embalmed, female cadaver pelvises. An Instron test frame (tensinometer) was used for load/ displacement analysis. The average patient age was 75 years. Ligament preparation yielded 15 ligaments available for testing. Recorded parameters were the ultimate load, failure displacement, and stiffness.

RESULTS

This in-vitro analysis of different suturing methods showed the difference between an orthogonal and an in-line approach to be the ultimate load. Orthogonal sutures displayed an ultimate load of 80 N while in-line suturing yielded only 57 N (p < 0.05). For the anterior longitudinal ligament, this study demonstrated that continuous suture is significantly superior to a single suture regarding failure displacement (p < 0.05).

CONCLUSION

We established baseline biomechanical parameters for the sacrospinous ligament and anterior longitudinal ligament. An orthogonal suture is superior to an in-line suture in an in-vitro model. A continuous suture is superior to a single suture at the anterior longitudinal ligament. Clinical trials might be able to evaluate whether any clinical significance can be established from these findings.

Outcome Analysis of Fixed Angle Locking Plate in Patella Fractures: A Single Centre Experience from North India

BACKGROUND

Tension band wiring supposedly is the most commonly used technique for displaced patella fractures, but is not effective in comminuted fractures and osteoporotic bones. It often leads to loosening of wires, dislocation of fracture, hardware problem and failure of osteosynthesis, resulting in knee stiffness and post-traumatic osteoarthritis. The aim of the study is to evaluate clinical outcome in patients with acute patella fractures (< 3 week) treated with unidirectional angle fixed low-profile titanium patella locking plate.

MATERIALS AND METHODS

Twenty patients who presented with displaced patella fractures, aged between 18-70 years were included in the study. All fractures were reduced and fixed with unidirectional angle fixed stable low-profile titanium patella locking plate. Knee Range of motion and Knee Outcome Survey Activities of Daily Living Scale (KOS-ADL) was used to evaluate the outcome.

RESULTS

We were able to achieve union in 19 out of 20 patients. One patient with comminuted patella fracture had failure of fixation, which was revised. Mean flexion at final follow-up was 124° (110°-130°) and none of the patients had extensor lag. The final radiograph revealed complete union in all patients.

CONCLUSION

This technique offers an option of fixation in comminuted patella fracture and in osteoporotic individuals. It provides mechanical stability for fracture fixation resulting in anatomical reduction, good functional outcome, lower incidence of symptomatic implant or failure of osteosynthesis.

Patella fracture fixation with a non-locked anterior plating technique: A biomechanical study

OBJECTIVES

The purpose of this study was to compare the biomechanical attributes of patella fracture fixation with either anterior plating utilizing two parallel, longitudinal 2.0 mm plates technique versus a cannulated screw tension band technique.

METHODS

Five matched pairs (ten specimens) of fresh frozen cadavers were utilized. A transverse patella fracture (OTA 34C1.1) was fixed using either two 4.0 mm cannulated screw anterior tension band (CATB) or with two 2.0 mm stainless steel non-locking plates along the anterior cortex secured with 2.4 mm cortical screws traversing the fracture site. Specimens underwent 1000 cycles of simulated active knee range of motion before load to failure destructive testing.

RESULTS

During cyclic loading there were no failures in the plate fixation group, and 2 out of 5 specimens catastrophically failed in the CATB group (p = 0.22). Average fracture displacement at the end of fatigue testing was 0.96 mm in the plate fixation group and 2.72 mm in the CATB group (p = 0.18). The specimens that withstood cyclic testing underwent a destructive load. Mean load to failure for the plate fixation specimens was 1286 N, which was not significantly different from the CATB group mean of 1175 N (p = 0.48). The mechanism of failure in the plate fixation cohort was uniformly via a secondary vertical patella fracture around the plates in all five specimens. In the CATB group, the mechanism of failure was via wire elongation and backing out of the screws.

CONCLUSIONS

Patella fixation with anterior plating technique statistically performed equivalent to cannulated screw anterior tension band in ultimate load to failure strength and fatigue endurance under cyclical loading. No failures were observed cyclic simulated active range of motion in the anterior plate group. There was a trend towards improved fatigue endurance in the plate fixation group, however this did not reach statistical significance. We believe plate fixation technique represents a low-profile implant option for treatment of transverse patella fractures, which may allow for early active range of motion, and these data support biomechanical equivalency to standard of care.

Patella Fractures: Approach to Treatment

Patellar fracture morphology varies based on the mechanism of injury. Most fractures are either a result of direct impact or through an indirect eccentric extensor contraction injury. Each fracture pattern requires appropriate preoperative planning and individualization of the fixation method. Displaced fractures affect the extension apparatus, and often require surgical fixation. Surgical treatment is recommended in fractures with any of the following features: articular step-off > 2 mm, > 3 mm of fracture displacement, open fractures, and displaced fractures affecting the extensor mechanism. Meticulous handling of the soft-tissue envelope is of the utmost importance, given the patella's tenuous blood supply and limited soft-tissue envelope. Incongruent articular surface can result in detrimental long-term effects; therefore, surgical treatment is directed toward anatomic reduction and fixation. The evolution of patellar fracture fixation continues to maximize options to balance rigid fixation with low-profile fixation constructs. Improving functional outcomes, minimizing soft-tissue irritation, and limiting postoperative complications are possible by using the therapeutic principles of rigid anatomical fixation and meticulous soft-tissue handling.

Functional Outcomes of Patella Fractures Treated With Anterior Plate Osteosynthesis at One Year

OBJECTIVES

To evaluate the functional outcomes of patients with displaced patellar fractures treated with anterior plate constructs.

DESIGN

Prospective cohort and retrospective clinical and radiographic assessment.

SETTING

Level I Trauma Center.

PATIENTS/PARTICIPANTS

Between 2014 and 2018, 18 patients who underwent operative intervention for an isolated, displaced patella fracture (OTA/AO 34C1-3) with a minimum of 1-year follow-up agreed to participate in the study. The mean follow-up was 19.5 ± 6.0 months.

INTERVENTION

Patients were treated with 2.4 or 2.7-mm plates and supplemental screws or cerclage wires.

MAIN OUTCOME MEASUREMENTS

Patients were evaluated with the Short Form-36 Survey and the Knee Injury and Osteoarthritis Outcome Scores and asked about symptomatic implants. The range of motion was assessed by goniometer.

RESULTS

The cohort had no wound complications, infections, nonunion, loss of reduction, or implant failure. Active knee flexion was 131 ± 7 degrees. Five patients (28%) endorsed implant irritation. Only one patient (5.5%) underwent implant removal, which consisted of transverse screw removal alone. Twelve of the 14 patients (86%), who were previously employed, returned to work at 10 ± 7 weeks. All Knee Injury and Osteoarthritis Outcome Scores subscale scores and the Short Form-36 Survey scores for physical functioning, limitations due to physical health, limitations due to mental health, and social functioning were significantly lower than reference population norms (P < 0.05).

CONCLUSIONS

Anterior plating provides reliable fixation for displaced patellar fractures and results in a low incidence of implant irritation. However, patients who had anterior fixation for displaced patella fractures continue to exhibit functional deficits at 1-year postoperatively.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Comminuted patellar fractures: The role of biplanar fixed angle plate constructs

Background

Comminuted patellar fractures represent a challenging clinical problem. Treatment aims to restore the integrity of the extensor mechanism and the congruity of patellofemoral joint. Controversy exists regarding the ideal fixation method. Metallic constructs aiming to convert pulling forces on the anterior aspect of the patella into compression forces across the fracture site are the standard of care. More recently, low profile plates have been described in the management of comminuted patellar fractures. The aims of this study were to (1) develop a novel unstable patellar fracture model and (2) to compare biomechanically three different constructs for fixation comminuted patellar fractures. We hypothesized that an orthogonal biplanar disposition of the screws within an anteriorly placed locking plate provides the best biomechanical properties in the management of comminuted fractures.

Methods

Six-part complex AO 34–C3 patella fractures were simulated in 18 human cadaveric knees by means of osteotomies including comminution around the distal patellar pole. The specimens were randomly assigned to 3 fixation techniques (n ​= ​6) for either anterior plating, antero-lateral plating, or tension band wiring (TBW). Biomechanical testing was performed over 5000 cycles in active extension and passive flexion, followed by ultimate destructive quasi-static testing. Interfragmentary movements were captured by means of optical motion tracking.

Results

Displacement between the proximal and distal medial patella fragments was lower after anterior plating compared to both antero-lateral plating (P ​= ​0.084) and TBW (P ​< ​0.001). Moreover, displacement between the proximal and distal lateral fragments was significantly lower after anterior plating compared to both other techniques (P ​≤ ​0.032). In addition, it was significantly lower for antero-lateral plating versus TBW (P ​< ​0.001). Rotation around the medio-lateral axis between the proximal and distal medial fragments was significantly lower after anterior plating compared to TBW (P ​= ​0.017).

Conclusions

Anterior mesh plating with biplanar placement of locking screws provides superior stability for fixation of comminuted patellar fractures when compared to both antero-lateral mesh plating and TBW. The latter is associated with considerably inferior performance.

Clinical outcomes of Ti-Ni shape-memory patella concentrator combined with cannulated compression screws in the treatment of C2 and C3 patella fracture: a retrospective study of 54 cases

Background

Ti-Ni shape-memory patella concentrator (TNSMPC) has been designed as an alternative approach for fixation of patella fracture, which has some advantages like higher hardness, higher tenacity, better wearing resistance, excellent corrosion resistance and desired histocompatibility. The present study was to investigate the efficiency of TNSMPC combined with cannulated compression screws in the treatment of comminuted patella fractures.

Methods

Between January 2014 and December 2017, 54 patients of C2 and C3 patella fractures underwent open reduction and internal fixation with TNSMPC combined with cannulated compression screws. All the patients got standard postoperative rehabilitation programs and were regularly followed up for at least 12 months after the operation. X-rays, knee functions and life quality were evaluated during the follow-up.

Results

All the patients achieved bone healing and recovery of knee function with low incidence of complications according to outcomes of X-rays and questionnaires. The average operation time and blood loss during surgery were 77.5 ± 25.12 min and 24.25 ± 4.70 ml respectively. The Knee Outcome Survey Activities of Daily Living Scale, the range of motion and the 36-item short-form heath survey after the operation were all improved. According to the Bostman’s criteria, the excellent to good rate was 92.6%.

Conclusion

TNSMPC combined with cannulated compression screws is an effective internal fixation method for C2 and C3 patella fracture with excellent clinical outcomes. In addition, the operation does not increase extra technique difficulty or tissue damage relatively, which is worth promotion.

Biomechanical comparison of a 3.5 mm anterior locking plate to cannulated screws with anterior tension band wiring in comminuted patellar fractures

PURPOSE

To date, surgically treated multifragmentary patellar fractures are still associated with high rates of complications, such as i.e. secondary fracture displacement. Osteosynthesis is most frequently performed with screws and cerclages. To increase primary stability, locking plates have been introduced. However, there is still a lack of biomechanical data supporting the superiority of plate fixation compared to screw fixation with cerclages in these cases. The goal of the present study was to conduct biomechanical comparison of these two techniques under dynamic loading conditions.

METHODS

A standardized 34-C3 fracture was created in eight pairs of human cadaveric knee joints. Following a randomization protocol, they were fixed with a 3.5 mm anterior locking plate (LP) or cannulated screws with anterior tension band wiring (hybrid osteosynthesis, HO).Subsequently, all constructs were tested for 100 cycles from 90° of knee-flexion to full extension by applying a pulling force to the quadriceps tendon. Outcome parameters were fracture displacement after one cycle, after 100 cycles and implant loosening. Failure was defined as fracture displacement > 2 mm.

RESULTS

Biomechanical testing showed significantly less fracture displacement following LP compared to HO both after the first (p = 0.042) and after 100 cycles (p = 0.025). The difference in loosening was significant as well (p = 0.017). Following HO, 5/8 constructs failed during cyclic loading. There was no failure in the LP group. In the HO group, loosening correlated with bone mineral density (R = - 0.857) which was not observed in the LP group (R = - 0.429).

CONCLUSION

Anterior locking plate osteosynthesis of comminuted patellar fractures biomechanically provides better primary stability compared to cannulated screws with anterior tension band wiring.

Fracture Patterns and Comminution Zones in OTA/AO 34C Type Patellar Fractures

OBJECTIVES

To characterize the fracture patterns and comminution zones for complete articular (OTA/AO 34C type) patellar fractures, using a computed tomography mapping technique.

METHODS

Eighty-three OTA/AO 34C type patellar fractures were included. Images of patellar fractures were superimposed on a coronal template of the patella, created from a healthy right knee, to identify fracture patterns and comminution zones.

RESULTS

Our analysis was based on 83 computed tomography images of patellar fractures, contributed by 69 male and 14 female patients (mean age, 52 years; range, 18-79 years), and included 13 type C1, 26 type C2 and 44 type C3 fractures. A transverse fracture, including both the medial and lateral facets, was the most common fracture pattern, identified in 92.8% of cases. In the C1 and C2 types, the fracture line affecting the medial and lateral joint surface was either transverse or oblique. In the C3 type, the transverse and vertical fracture line of the medial articular surface extended to the inferior pole of the patella, with transverse and oblique fractures lines on the lateral joint surface. In addition, a concentration of the fracture lines around the vertical ridge was observed.

CONCLUSIONS

The patterns of fracture lines and comminution zones OTA/AO 34C type fractures were repeatable on the constructed maps. A transverse fracture line on the inferior pole which was observed in the C2 and C3 type fractures may be used for the modification of current classification systems to direct treatment.

Hook plating in patella fractures

PURPOSE

Tension band wiring is considered the standard treatment for patella fractures. However, it is limited for fractures with marginal involvement, comminution, and osteoporotic bone. Our experience indicates that these limitations can be overcome with the hook plate. We evaluated the radiographic and clinical outcomes in patients with patella fracture treated with hook plating.

METHODS

We enrolled 30 patients who underwent hook plating for patella fracture at two institutions between 2013 and 2017. Fracture classification and surgical options were reviewed. Postoperative fracture gap and time to union as radiographic measurements, and complications, range of motion, and functional outcome with the Lysholm score as clinical outcomes, were evaluated retrospectively.

RESULTS

Nine fractures were AO/OTA 34A1, three B1, one B2, two C1, nine C2, and six C3. All were closed fractures. There were 3 cases of revision, 4 with lateral or medial marginal fracture, 9 with isolated inferior pole fracture, and 14 with comminuted fracture. The average postoperative fracture gap was 0.4 (range, 0-2.0) mm, and bone union was achieved without additional intervention. The average time to union was 11.6 (range, 7-24) weeks. There were no complications, and no extension lag except in one case (10°). The average flexion was 138.5° (range, 110-145°). For functional outcomes, the average Lysholm score was 89.5 (range, 74-95), with 13 excellent, 14 good, 3 fair, and no poor cases.

CONCLUSION

This study suggests that hook plating can result in good bone union and restored knee function in marginal or comminuted fractures of the patella.

Management of comminuted patellar fracture fixation using modified cerclage wiring

Background

Although there are several different kinds of fixation techniques for displaced comminuted patellar fracture, the treatment remains a challenge for orthopaedic surgeons. The purpose of this study is to evaluate the effectiveness and safety of a fixation technique for comminuted patellar fracture fixation using modified cerclage wiring.

Methods

From February 2016 to April 2018, 38 cases of simple unilateral closed comminuted patellar fracture were treated by modified cerclage wiring. Among these cases, 16 patients were males and 22 were females, aged 23–68 years (average 40.4 ± 9.1 years). Comminuted patellar fractures were classified according to the AO/OTA classification: 10 cases were type 34-C2 (three fragments), 28 cases were type 34-C3 (more than three fragments). Postoperative complications including loosening of internal fixation, fragment re-displacement, nonunion, infection, breakage of internal fixation and traumatic osteoarthritis were assessed. The clinical results after operation were evaluated by the clinical grading scales of Böstman including range of movement, pain, work, atrophy, assistance in walking, effusion, giving way, and stair-climbing during follow-up.

Results

A total of 38 patients were followed up for 6–36 months (mean time 16.1 ± 5.8 months). The bone union radiographically occurred at approximately 2.5–3.5 months (mean time 2.92 ± 0.25 months). No postoperative complications, such as infection, dislocation, breakage of the implants, painful hardware, and post-traumatic osteoarthritis, were observed. According to the clinical grading scales of Böstman, satisfactory results were obtained, and the mean score at the final follow-up was 28.7 (range 20–30) points. Thirty-two patients (84.2%) with excellent results had a mean score of 29.5 ± 0.7 (range 28–30) points, and six patients (15.8%) with good results had a mean score of 24.5 ± 2.2 (range 20–27) points. The patients with excellent and good scores had active flexion of 130° (110–140).

Conclusions

Modified cerclage wiring can effectively treat comminuted patellar fracture and offers a new strategy resulting in satisfactory results without obvious complications.

[Patellar fractures]

Patellar fractures are a relatively rare entity with an prevalence of 1%. Preoperative computed tomography has gained a significant role as a diagnostic tool for patellar fractures in recent years. It enables an exact assessment of the fracture and helps in the decision making for the correct treatment procedure. Therapeutically, the armamentarium was supplemented by angle stable plate fixation, which potentially enables a better reconstruction of the patella than the conventional tension band fixation. In this context, the results of angle stable plate fixation are promising in terms of functional outcome and lower complication rates. The proven tension band fixation using K‑wires or cannulated screws continues to be widespread in clinical practice and retains significance for simple patellar fractures. The use of polyethylene thread material instead of steel wire has shown advantages in biomechanical studies but the clinical application is more restrained.

Biomechanical Comparison of Tension Band Fixation of Patella Transverse Fracture: Headless Screws Versus Headed Screws

OBJECTIVE

This study aimed to investigate the stability and strength of tension band wire fixation using headless compression screws versus headed screws for transverse patella fractures.

METHODS

Six matched pairs of fresh-frozen cadaveric knees with transverse osteotomies created at the midpoint of the patella were surgically fixed, with one knee randomly receiving fixation with headless screws (Acumed Acutrak 4/5) and the other with headed screws (Synthes 4.0 partially threaded cannulated screws). The specimens were mounted onto a servohydraulic load frame in a 45-degree flexed position and loaded through the quadriceps tendon. Interfragmentary movement was recorded with a motion analysis system. The initial fixation stiffness, range of interfragmentary motion, and strength of the headless screw construct were compared with the headed screw construct. Failure was defined as either a sudden drop in applied tendon force or 2 mm of separation on the anterior surface of the patella (ie, clinical failure), whichever occurred first.

RESULTS

Mean primary interfragmentary motion was 0.31 ± 0.28 degrees for the headed screws and 0.10 ± 0.06 degrees for headless screws under 150 N load (P = 0.03). Mean construct stiffness was 277 ± 243 N/degrees for the headed screws and 510 ± 362 N/degrees for the headless screws (P = 0.03). None of the constructs from either group displayed structural failure before reaching the clinical failure gap of 2 mm. The mean clinical failure strength was 808 ± 183 N for the headless screws construct and 520 ± 241 N for the headed screws construct (P = 0.03).

CONCLUSIONS

Headless screw tension band fixation demonstrated superior biomechanical behaviors over standard headed screw fixation with higher construct rigidity, smaller interfragmentary motion, and greater fixation strength.

Cannulated Screw Prominence in Tension Band Wiring of Patella Fractures Increases Fracture Gapping: A Cadaver Study

BACKGROUND

Transverse patella fractures are often treated with cannulated screws and a figure-of-eight anterior tension band. A common teaching regarding this construct is to recess the screws so that their distal ends do not protrude beyond the patella because doing so may improve biomechanical performance. However, there is a lack of biomechanical or clinical data to support this recommendation.

QUESTION

In the treatment of transverse patella fractures, is there a difference between prominent and recessed cannulated screw constructs, supplemented by tension banding, in terms of gap formation from cyclic loading and ultimate load to failure?

METHODS

Ten pairs of fresh-frozen cadaver legs (mean donor age, 72 years; range, 64-89 years) were randomized in a pairwise fashion to prominent or standard-length screws. In the prominent screw group, screw length was 15% longer than the measured trajectory, resulting in 4 to 6 mm of additional length. Each patella was transversely osteotomized at its midportion and fixed with screws and an anterior tension band. Gap formation was measured over 40 loaded flexion-extension cycles (90° to 5°). Ultimate load to failure was assessed with a final monotonic test after cyclic loading. Areal bone mineral density (BMD) of each patella was measured with dual energy x-ray absorptiometry (DEXA). There was no difference in BMD between the recessed (1.06 ± 0.262 g/cm) and prominent (1.03 ± 0.197 g/cm) screw groups (p = 0.846). Difference in gap formation was assessed with a Wilcoxon Rank Sum Test. Ultimate load to failure and BMD were assessed with a paired t-test.

RESULTS

Patella fractures fixed with prominent cannulated screws demonstrated larger gap formation during cyclic loading. Median gap size at the end of cyclic loading was 0.13 mm (range, 0.00-2.92 mm) for the recessed screw group and 0.77 mm (range, 0.00-7.50 mm) for the prominent screw group (p = 0.039; 95% confidence interval [CI] difference of geometric means, 0.05-2.12 mm). There was no difference in ultimate failure load between the recessed screw (891 ± 258 N) and prominent screw (928 ± 268 N) groups (p = 0.751; 95% CI difference of means, -226 to 301 N). Ultimate failure load was correlated with areal BMD (r = 0.468; p = 0.046).

CONCLUSIONS

In this cadaver study, when using cannulated screws and a figure-of-eight tension band to fix transverse patella fractures, prominent screws reduced the construct's ability to resist gap formation during cyclic loading testing.

CLINICAL RELEVANCE

This biomechanical cadaver study found that the use of prominent cannulated screws for the fixation of transverse patella fractures increases the likelihood of interfragmentary gap formation, which may potentially increase the risk of fracture nonunion and implant failure. These findings suggest that proximally and distally recessed screws may increase construct stability, which may increase the potential for bony healing. The findings support further laboratory and clinical investigations comparing recessed screws supplemented by anterior tension banding with other repair methods that are in common use, such as transosseous suture repair.

Outcomes after locked plating of displaced patella fractures: a prospective case series

PURPOSE

Tension band wiring remains a common treatment for patella fractures, but complication rates are high, with unsatisfactory results. The purpose of this observation study was to evaluate clinical results and complication rates of a novel patella locking plate fixation.

METHODS

Twenty patients (mean age, 59.2 ± 18 years) with displaced patella fractures were prospectively enrolled. Range of motion, knee scores (Tegner, Lysholm, Kujala), complications, and revision surgeries were assessed six weeks, six months, 12 months, and 24 months after surgery. Results were compared to the situation before trauma in regards to the time of follow-up using a paired sample t test.

RESULTS

According to the OTA classification, the fractures were classified as follows: one A1, four C1, six C2, and nine C3. Range of motion improved from 121° after six weeks to 140°, 141°, and 143° within the follow-up period. While the Tegner, Lysholm, and Kujala scores were 4.1/97/97, respectively, before trauma, they improved from 2.6/80/89 to 3.6/94/89, 3.7/95/94, and 4.1/97/97 within the follow-up period. Three patients had a complication (15%): one fracture dislocation, one reactive bursitis, and one renewed fracture. Four patients reported discomfort or anterior knee pain especially when kneeling on the implant.

CONCLUSIONS

The patella locking plate is a safe and effective treatment for patella fractures, including comminuted fractures. Function can be restored within six months after surgery, and the complication rate is low. Nonetheless, the implant can cause discomfort or anterior knee pain especially when kneeling, which can necessitate an implant removal.

Miniplate Augmented Tension-Band Wiring for Comminuted Patella Fractures

The aim of this study was to introduce various applications of miniplate augmented tension-band wiring (TBW) for comminuted patella fractures and to evaluate the clinical outcomes. Comminuted articular patella fractures were managed with anterior cortical miniplate fixation with a TBW technique from January 2014 to January 2016. The primary end point was radiographic union. Secondary end points were complications related to the procedure. Functional outcomes including range of motion were also evaluated. Thirty patients were followed up for a mean of 20 months (range, 12-28) postoperatively. The primary union rate was 96% (29 of 30 patients). Mean time to union was 3.2 months. One patient required additional surgery because of acute postoperative infection. Twenty-five patients recovered a full range of motion relative to the contralateral limb. The mean Bostman score at the last follow-up was 28.6 points (range, 26-30). In conclusion, miniplate augmented TBW is a versatile and useful technique for comminuted patella fracture fixation.

Laparoscopic pectopexy: a follow-up cyclic biomechanical analysis determining time to functional stability

INTRODUCTION

Pectopexy, a laparoscopic method for prolapse surgery, showed promising results in previous transient testing by this group. It was shown that a single suture, yielding an ultimate load of 35 N, was equivalent to continuous suturing. This was demonstrated in an in vitro cadaver study. This transient data were used to establish an elastic stress-strain envelope. It was now possible to proceed to dynamic in vitro analysis of this surgical method to establish time to functional stability.

METHODS

Cyclic testing of this fixation method was performed on human female embalmed cadaver (cohort 1) and fresh, non-embalmed cadaver (cohort 2) pelvises. The testing envelope was 5-25 N at a speed of 1 mm/s. 100 load regulated cycles were applied.

RESULTS

100 cycles were completed with each model; no overall system failure occurred. Steady state, i.e., functional stability was reached after 14.5 (± 2.9) cycles for the embalmed group and after 19.1 (± 7.2) cycles for the non-embalmed group. This difference was statistically significant p = 0.00025.

CONCLUSION

This trial showed in an in vitro cyclic testing of the pectopexy method that functional stability may be achieved after no more than 19.1 cycles of load exposure. When remaining within the established load envelope of below 25 N, patients do not need to fear global fixation failure. Testing did demonstrate differences in non-embalmed and embalmed cadaver testing. Embalmed cadaver testing tends to underestimate time to steady state by 26.3%.

[Plate osteosynthesis after patellar fracture - the technique and initial results of a prospective study]

BACKGROUND

Tension band wiring after patellar fractures is related to a high number of implant-related complications (22-53 %). Revision surgery is necessary in 10-55 % of patients mostly with unsatisfactory results. The patella plate is an alternative treatment with the advantages of locked plating. The purpose of this study was to evaluate the first clinical prospective results and complications of this new implant.

MATERIALS AND METHODS

Between April 2013 and May 2015 all patients that were treated with locked plating for patella fractures were included in this prospective study. Patients were followed-up clinically after six weeks and six months.

RESULTS

Included in this study were 17 patients, 6 women and 11 men, with a mean age of 58 years (19-87). The knee range of motion was 120° after 6 weeks and improved to 138° after 6 months, corresponding to 84 % and 97 % of the range of motion of the healthy opposite knee. The Tegner activity scale increased from 2,5 to 3,5 (initial value: 4), the Lysholm score increased from 78 to 92 points (initial value: 97) and the Kujala score increased from 72 to 88 points (initial value: 96). Two complications occurred: one patient had a reactive bursitis prepatellaris and one patient sustained a loss of reduction.

CONCLUSION

Locked plating of patella fractures is a reliable alternative treatment with good functional outcomes and low complication rates.

Treatment of Patella Fractures

Patella fractures comprise 1% of all fractures. Treatment options vary based on fracture displacement, classification, and patient factors. Traditionally, nonoperative treatment has been reserved for nondisplaced fractures. Many operative treatments are available with differing indications and levels of success. Tension band constructs have been the most commonly employed approach to fixation, with cerclage wiring for comminuted fractures. Recently, plate fixation of patella fractures has become more popular. Plating constructs offer a low-profile design with stable fixation, allowing for earlier mobilization and potentially improved functional outcomes. Data regarding the long-term outcomes of plating techniques are limited, and further studies are needed. [Orthopedics. 2018; 41(6):e747-e755.].

A Biomechanical Study of an Alternative Internal Fixation Method for Transverse Patella Fractures

Pain and reoperation after fixation using tension band wiring and K-wires is not uncommon. A novel hook plate was designed to improve the treatment of patella fractures. The aim of this study was to compare the stability of the hook plate with that of tension band wiring and K-wires in a simulated patellar transverse fracture model (AO/OTA classification 34-C1.1). The authors tested 16 embalmed cadaver knee joints fixed with the hook plate and tension band wiring and K-wires under cyclic loading. Specimens underwent 100 cycles extending the knee joint from 90° of flexion to full extension at a velocity of 50 mm/min. The fracture gap was measured after the initial and last cycles. Data were assessed statistically using the t test, with significance set as P<.05. The fatigue test showed that the fracture gap after 100 cycles was 2.97±1.39 mm using tension band wiring and K-wires and 1.53±0.93 mm for the hook plate (P=.029). Six of 8 specimens in the tension band wiring and K-wires group met the failure criterion of fracture gap greater than 2 mm vs 1 in the hook plate group (P=.041). From a biomechanical point of view, the hook plate is a valid alternative to tension band wiring and K-wires for fixing patella transverse fractures. Compared with tension band wiring and K-wires, the hook plate may have superior ability in sustaining a reduced transverse patella fracture. [Orthopedics. 2018; 41(5):e643-e648.].

A Locked Intraosseous Nail for Transverse Patellar Fractures: A Biomechanical Comparison with Tension Band Wiring Through Cannulated Screws

BACKGROUND

Displaced transverse patellar fractures require open reduction and internal fixation. State-of-the-art stabilization techniques are tension band wiring (TBW) using Kirschner wires or cannulated screws. These techniques are associated with high rates of secondary fracture displacement, implant migration, implant prominence, wound-healing disturbances, and the need for implant removal. Recently, a locked intraosseous patellar nail prototype was developed. The aim of the present study was to investigate the biomechanical performance of this nail compared with TBW using cannulated screws.

METHODS

Seven paired fresh-frozen human cadaveric knees were stripped of all soft tissues except the extensor apparatus. A transverse osteotomy was created to simulate an OTA/AO type 34-C1 transverse patellar fracture. The specimen pairs were randomly assigned to be fixed with TBW using cannulated screws or with the new intraosseous nail. Each specimen was cyclically tested for 5,000 cycles by pulling on the quadriceps tendon and simulating active knee extension and passive knee flexion within the range from 90° of flexion to full knee extension. Anterior and articular margin displacement of the fracture as well as interfragmentary rotation around the mediolateral axis were investigated with optical motion tracking after 100, 500, 1,000, 2,500, and 5,000 test cycles.

RESULTS

Within the respective 5 testing-cycle time points evaluated, the articular margin displaced on average 68%, 60%, 72%, 76%, and 81% less after intraosseous nailing compared with TBW. Whereas the difference remained nonsignificant after 100 and 500 cycles (p ≥ 0.116), a trend toward significance was observed after 1,000 cycles (p = 0.063), which became significant after 2,500 and 5,000 cycles (p ≤ 0.043).

CONCLUSIONS

From a biomechanical point of view, the locked intraosseous patellar nail may be an alternative to TBW using cannulated screws because of the higher interfragmentary stability provided at the articular fracture site.

CLINICAL RELEVANCE

A locked patellar nail for transverse patellar fractures achieved a stable osteosynthetic construct that may reduce hardware-associated complications because of its intraosseous positioning.

Fixed angle plate fixation of comminuted patellar fractures

INTRODUCTION

Comminuted patella fractures are uncommon and difficult fractures to manage. Multiple treatment modalities have been suggested, with little clinical data to support practice. Recent biomechanical and technical investigations have described successful plate fixation of comminuted patella fractures. The purpose of this study was to evaluate radiographic, clinical and functional outcome of comminuted patella fractures treated with a fixed angle locking plates. We believe stable fixation, which results in successful fracture union and functional recovery, can be achieved with this technique.

MATERIALS AND METHODS

A retrospective review was performed at a single regional academic Level 1 trauma hospital. All comminuted patella fractures treated with a fixed angle locking plate (AO/OTA 34C2 and C3) over a six-year period were evaluated. Thirty-six patients were identified. Average length of follow up was 154 weeks (range 12-297 weeks). Twenty patients were available for functional outcome scoring. Primary outcome measures were: Knee Outcome Score (KOS), Lower Extremity Functional Scale (LES) and goniometer measured knee range of motion. Secondary outcomes evaluated the need for additional screw or cerclage fixation, reoperation for any reason, bothersome hardware, infection and nonunion.

RESULTS

Average KOS = 57.2 (20-74), average LES = 58.9 (15-80). Median extension = 0° (full extension), median flexion = 130°. Supplemental screws were used in 17/36 cases; cerclage used in 2/36 cases. Hardware irritation was noted in 4/20 patients, no patient requested elective hardware removal, one patient had failure of fixation and no nonunions were identified.

CONCLUSION

Fixed angle plate stabilization of comminuted patella fractures is a viable technique for fracture fixation. Good to excellent return of knee function and low complication rates, including need for hardware removal, can be expected.