N-doped carbon intercalated Fe-doped MoS2 nanosheets with widened interlayer spacing: an efficient peroxymonosulfate activator for high-salinity organic wastewater treatment

Chitosan-derived N-doped carbon supported Cu/Fe co-doped MoS2 nanoparticles as peroxymonosulfate activator for efficient dyes degradation

Peroxymonosulfate (PMS), which is dominated by free radical (SO4•-) pathway, has a good removal effect on organic pollutants in complex water matrices. In this article, a new catalyst (CFM@NC) was synthesized by hydrothermal carbonization method with chitosan (CS) as N and C precursors, and used to activate PMS to degrade dye wastewater. CFM@NC/PMS system can degrade 50 mg·L-1 rhodamine B by 99.59 % within 30 min, and the degradation rate remains as high as 97.32 % after 5 cycles. It has good complex background matrices, acid-base anti-interference ability (pH 2.6-10.1), universality and reusability. It can degrade methyl orange and methylene blue by >98 % within 30 min. The high efficiency of the composite is due to the fact that CS-modified MoS2 as a carrier exposes a large number of active sites, which not only disperses CuFe2O4 nanoparticles and improves the stability of the catalyst, but also provides abundant electron rich groups, which promotes the activation of PMS and the production of reactive oxygen species (ROS). PMS is effectively activated by catalytic sites (Cu+/Cu2+, Fe2+/Fe3+, Mo4+/Mo6+, pyridine N, pyrrole N, edge sulfur and hydroxyl group) to produce a large number of radicals to attack RhB molecules, causing chromophore cleavage, ring opening, and mineralization. Among them, free radical SO4•- is the main ROS for RhB degradation. This work is expected to provide a new idea for the design and synthesis of environmentally friendly and efficient heterogeneous catalysts.

CuFeS2/GAC particle combined with electrochemical activation of persulfates for efficient degradation of carbamazepine

Electrochemically activated persulfate is a potential advanced oxidation process due to its advantages of environmental friendliness, high efficiency, and convenient operation. An Fe-Cu-S granular activated carbon (CuFeS2/GAC, abbreviated as FCSG) particles electrode was developed and applied to degrade carbamazepine (CBZ) combined with electrochemical activation of persulfate (E-PDS-FCSG) in this work. Compared to two-dimensional electrochemical process (E-PDS), the three-dimensional (3D) E-PDS-FCSG process exhibited higher removal efficiency of CBZ and lower energy consumption. The removal efficiency of CBZ and power consumption increased by 96% and reduced by 67%, respectively. Over 98% of CBZ removal rate was reached within 25 min. Apart from the same free radicals in two-dimensional electrochemical process, both Fe2+ and Cu+ on the surface of three-dimensional particle electrodes can directly activate PDS to produce SO4•-, and the existence of S2- strengthens the circulation of Fe3+/Fe2+ and Cu2+/Cu+. Furthermore, FCSG particle electrode can not only directly enhance the activation of PDS, but also accelerate the electron transfer, and then effectively promoting reactive species generation. LC-MS analysis showed that the main degradation pathways of CBZ involved decarbonylation, deamination, dealkylation, ring opening and mineralization. Moreover, after five cycle experiments, over 80% of CBZ removal rate could be achieved, demonstrating that the E-PDS-FCSG system had excellent electrocatalytic performance and good stability. These findings indicate that FCSG is a promising material and could be used as a particle electrode for removing organic pollutants from water.

Insights into the efficient removal and mechanism of NiFeAl-LDH with abundant hydroxyl to activate peroxymonosulfate for sulfamethoxazole wastewater

Layered double hydroxide (LDH) material with abundant OH was successfully prepared by co-precipitation method, and a water purification system of Ni2Fe0.25Al0.75-LDH activated peroxymonosulfate (PMS) was constructed to rapidly degrade sulfamethoxazole (SMX) pollutants. The optimal conditions for the degradation of SMX in the system were as follows: 0.30 g/L Ni2Fe0.25Al0.75-LDH, 0.30 mM PMS, pH = 7 and 90 % SMX was removed in 10 min and almost completely in 40 min, which was consistent with the predicted results of response surface methodology (RSM) analysis. The abundant OH in Ni2Fe0.25Al0.75-LDH could form M(O)OSO3 complexes with PMS, accelerating the generation of reactive oxygen species (ROS) and promoting the removal of SMX. Quenching experiments and electron paramagnetic resonance (EPR) spectra showed that SO4-, OH, O2- and 1O2 also existed in the system. The surface-bound SO4- and O2- contributed greatly to the removal of SMX and the electron transfer between metals was also conducive to the production of active substances. The possible degradation pathways and intermediates of SMX were proposed. The toxicity assessment software tool (T.E.S.T) and total organic carbon (TOC) results indicated that the Ni2Fe0.25Al0.75-LDH/PMS system could reduce the overall environmental risk of SMX to some extent. This study provided a new strategy for the practical application of heterogeneous catalysts in sewage treatment.

Chitosan derived N-doped carbon anchored Co3O4-doped MoS2 nanosheets as an efficient peroxymonosulfate activator for degradation of dyes

Peroxymonosulfate (PMS), which is dominated by non-free radical pathway, has a good removal effect on organic pollutants in complex water matrices. In this article, a biodegradable cobalt-based catalyst (Co3O4/MoS2@NCS) was synthesized by a simple hydrothermal method with chitosan (CS) as nitrogen‑carbon precursor and doped with Cobaltic‑cobaltous oxide (Co3O4) and Molybdenum disulfide (MoS2), and was used to activate PMS to degrade dye wastewater. Electrochemical tests showed that Co3O4/MoS2@NCS exhibited higher current density and cycling area than MoS2@NCS and MoS2. In the Co3O4/MoS2@NCS/PMS system, the degradation rate of 30 mg·L-1 rhodamine B (RhB) reached 97.75 % within 5 min, and kept as high as 94.34 % after 5 cycles. Its rate constant was 1.91 and 8.37 times that of MoS2@NCS/PMS and MoS2/PMS, respectively. It had good complex background matrices and acid-base anti-interference ability, and had good universality and reusability. The degradation rate of methyl orange (MO) and methylene blue (MB) were more than 91 % within 5 min at pH 4.8. The experimental results demonstrated that MoS2-modified CS as a carrier exposed a large number of active sites, which not only dispersed Co3O4 nanoparticles and improved the stability of the catalyst, but also provided abundant electron rich groups, and promoted the activation of PMS and the production of reactive oxygen species (ROS). PMS was effectively activated by catalytic sites (Co3+/Co2+, Mo4+/Mo5+/Mo6+, CO, pyridine N, pyrrole N, hydroxyl group and unsaturated sulfur), producing a large number of radicals that attack RhB molecules, causing chromophore cleavage, ring opening, and mineralization. Among them, non-free radical 1O2 was the main ROS for RhB degradation. This work is expected to provide a new idea for the design and synthesis of environmentally friendly and efficient MoS2-modified cobalt-based catalysts.

Development of MoS2-stainless steel catalyst by 3D printing for efficient destruction of organics via peroxymonosulfate activation

Herein, a novel MoS2-stainless steel composite material was first synthetized via a 3D printing method (3DP MoS2-SS) for peroxymonosulfate (PMS) activation and organics degradation. Compared with MoS2-SS powder/PMS system (0.37 g/(m2/min)), 4.3-fold higher kFLO/SBET value was obtained in 3DP MoS2-SS/PMS system (1.60 g/(m2/min), resulting from the superior utilization of active sites. We observed that 3DP MoS2-SS significantly outperformed the 3DP SS due to the enhanced electron transfer rate and increased active sites. Moreover, Mo4+ facilitated the Fe2+/Fe3+ cycle, resulting in the rapid degradation of florfenicol (FLO). Quenching experiments and electron paramagnetic resonance spectra indicated that •OH, SO4•-, O2•- and 1O2 were involved in the degradation of FLO. The effect of influencing factors on the degradation of FLO were evaluated, and the optimized degradation efficiency of 98.69% was achieved at 1 mM PMS and pH of 3.0. Six degradation products were detected by UPLC/MS analyses and several possible degradation pathways were proposed to be the cleavage of C-N bonds, dechlorination, hydrolysis, defluorination and hydroxylation. In addition, 3DP MoS2-SS/PMS system also demonstrated superior degradation performance for 2-chlorophenol, acetaminophen, ibuprofen and carbamazepine. This study provided deep insights into the MoS2-SS catalyst prepared by 3DP technology for PMS activation and FLO-polluted water treatment.

Efficient carbamazepine degradation with Fe3+ doped 1T/2H hybrid molybdenum disulfide as peroxymonosulfate activator under high salinity wastewater

Drawing on the robust activation activity and affinity that transition metal ions and MoS₂ exhibit towards peroxymonosulfate (PMS), 1T/2H hybrid molybdenum disulfide doped with Fe³⁺ (Fe³⁺/N-MoS₂) was synthesized to activate PMS for the treatment of organic wastewater. The ultrathin sheet morphology and 1T/2H hybrid nature of Fe³⁺/N-MoS₂ were confirmed by characterization. The (Fe³⁺/N-MoS₂ + PMS) system demonstrated excellent performance in the degradation of carbamazepine (CBZ) above 90% within 10 min even under high salinity conditions. By electron paramagnetic resonance and active species scavenging experiments, it was inferred that SO₄^•─ palyed a dominant role in the treatment process. The strong synergistic interactions between 1T/2H MoS₂ and Fe³⁺ efficiently promoted PMS activation and generated active species. Additionally, the (Fe³⁺/N-MoS₂ + PMS) system was found to be capable of high activity for CBZ removal in high salinity natural water, and Fe³⁺/N-MoS₂ exhibited high stability during recycle tests. This new strategy of Fe³⁺ doped 1T/2H hybrid MoS₂ for more efficient PMS activation provides valuable insights for the removal of pollutants from high salinity wastewater.

Overestimation of 1O2 role in N-doped carbon materials/peroxymonosulfate system: The misleading of furfuryl alcohol quenching effect

Singlet oxygen (¹O₂) is frequently observed in persulfate-based advanced oxidation processes (PS-AOPs), however its significance in the removal of organic compounds is debatable. To evaluate the role of ¹O₂, some organic pollutants that have been proven to be successfully degraded by ¹O₂ in earlier research were selected as the targeted pollutants of this study. In the activation of peroxymonosulfate (PMS) using Co-BTC (a type of metal-organic framework)/melamine derived nitrogen-doped carbon material (Co-BTC/10MNC) as the catalyst, ¹O₂ and surface-bound SO₄^•- are discovered, however only surface-bound SO₄^•- was the dominant species. The degree of inhibition of furfuryl alcohol (FFA) on the removal of organics is reliant on the reaction rates of SO₄^•- and organics, rather than on the quenching impact of FFA on ¹O₂. The lower k_SO4•- organics have, the easier it is for FFA to inhibit their removal. In short, the quenching effect of FFA is not solid evidence to identify ¹O₂. Besides, it is found that the influence of HCO₃^- is related to the second order reaction rate constant (k_HCO3•) between HCO₃^• and organics, implying that the selective removal of some organics is due to that corresponding inorganic radicals (Cl^•, NO₃^•, HCO₃^• or HPO₄^•-) have good ability to degrade these organics, rather than ¹O₂ as the key reactive oxygen species.

Importance of carbon structure for nitrogen and sulfur co-doping to promote superior ciprofloxacin removal via peroxymonosulfate activation

Herein, five N, S-co-doped carbocatalysts were prepared from different carbonaceous precursors, namely sawdust (SD), biochar (BC), carbon-nanotubes (CNTs), graphite (GP), and graphene oxide (GO) and compared. Generally, as the graphitization degree increased, the extent of N and S doping decreased, graphitic N configuration is preferred, and S configuration is unaltered. As peroxymonosulfate (PMS) activator for ciprofloxacin (CIP) removal, the catalytic performance was in order: NS-CNTs (0.037 min^-1) > NS-BC (0.032 min^-1) > NS-rGO (0.024 min^-1) > NS-SD (0.010 min^-1) > NS-GP (0.006 min^-1), with the carbonaceous properties, rather than the heteroatoms content and textural properties, being the major factor affecting the catalytic performance. NS-CNTs was found to have the supreme catalytic activity due to its remarkable conductivity (3.38 S m^-1) and defective sites (I_D/I_G = 1.28) with high anti-interference effect against organic and inorganic matter and varying water matrixes. The PMS activation pathway was dominated by singlet oxygen (¹O₂) generation and electron transfer regime between CIP and PMS activated complexes. The CIP degradation intermediates were identified, and a degradation pathway is proposed. Overall, this study provides a better understanding of the importance of selecting a suitable carbonaceous platform for heteroatoms doping to produce superior PMS activator for antibiotics decontamination.