Polyvinylidene fluoride multi-scale nanofibrous membrane modified using N-halamine with high filtration efficiency and durable antibacterial properties for air filtration

Fabrication of N-halamine/MWPPy-ZnO hybrids based cellulose nanofibril composite films with improved UV-protective, antibacterial, and biofilm control functions

The design and fabrication of synergistic hybrid antibacterial materials is a promising approach for achieving effective sterilization while compensating for the deficiency of a single component. Despite being highly effective biocidal components, the poor UV light stability of some N-halamines limits their applications. This study was conducted to address this issue by the rational integration of cyclic N-halamine precursor (PGHAPA) with microwaved zinc oxide (MWPPy-ZnO) nanoparticles via covalent bonds and the preparation of cellulose nanofibrils based antibacterial composite films after chlorination (CNF/MWPPy-ZnO-PGHAPA-Cl). The proposed films offered tight lamellar structure, considerable thermal stability and better mechanical properties. The results from the FT-IR and XPS experiments provided the evidence of chemical reactions among the PGHAPA, MWPPy-ZnO, and CNF film. Notably, the CNF/MWPPy-ZnO-PGHAPA-Cl films showed improved UV stability with a chlorine content of up to 0.16 % after 24 h of irradiation, which was much greater than that of the CNF/PGHAPA-Cl films. Furthermore, the CNF/MWPPy-ZnO-PGHAPA-Cl films displayed rapid bactericidal activity, inactivating all the contacted Staphylococcus aureus and Escherichia coli O157:H7 strains within 5 min, along with prominent biofilm disruption, indicating great potential for daily food packaging applications.

Electroactive nanofibrous membrane with antibacterial and deodorizing properties for air filtration

Water vapor from respiration can severely accelerate the charge dissipation of the face mask, reducing filtration efficiency. Moreover, the foul odor from prolonged mask wear tends to make people remove their masks, leading to the risk of infection. In this study, an electro-blown spinning electroactive nanofibrous membrane (Zn/CB@PAN) with antibacterial and deodorization properties was prepared by adding zinc (Zn) and carbon black (CB) nanoparticles to the polyacrylonitrile (PAN) nanofibers, respectively. The filtration efficiency of Zn/CB@PAN for PM0.3 was > 99% and could still maintain excellent durability within 4 h in a high-humidity environment (25 ℃ and RH = 95%). Moreover, the bacterial interception rate of the Zn/CB@PAN could reach 99.99%, and it can kill intercepted bacteria. In addition, the deodorization rate of Zn/CB@PAN in the moist state for acetic acid was 93.75% and ammonia was 95.23%, respectively. The excellent filtering, antibacterial, and deodorizing performance of Zn/CB@PAN can be attributed to the synergistic effect of breath-induced Zn/CB galvanic couples' electroactivity, released metal ions, and generated reactive oxygen species. The developed Zn/CB@PAN could capture and kill airborne environmental pathogens under humid environments and deodorize odors from prolonged wear, holding promise for broad applications as personal protective masks.

Ultrathin, ultralight dual-scale fibrous networks with high-infrared transmittance for high-performance, comfortable and sustainable PM0.3 filter

Highly permeable particulate matter (PM) can carry various bacteria, viruses and toxics and pose a serious threat to public health. Nevertheless, current respirators typically sacrifice their thickness and base weight for high-performance filtration, which inevitably causes wearing discomfort and significant consumption of raw materials. Here, we show a facile yet massive splitting eletrospinning strategy to prepare an ultrathin, ultralight and radiative cooling dual-scale fiber membrane with about 80% infrared transmittance for high-protective, comfortable and sustainable air filter. By tailoring antibacterial surfactant-triggered splitting of charged jets, the dual-scale fibrous filter consisting of continuous nanofibers (44 ± 12 nm) and submicron-fibers (159 ± 32 nm) is formed. It presents ultralow thickness (1.49 μm) and base weight (0.57 g m-2) but superior protective performances (about 99.95% PM0.3 removal, durable antibacterial ability) and wearing comfort of low air resistance, high heat dissipation and moisture permeability. Moreover, the ultralight filter can save over 97% polymers than commercial N95 respirator, enabling itself to be sustainable and economical. This work paves the way for designing advanced and sustainable protective materials.

Reversible bacteria-killing and bacteria-releasing cotton fabric with anti-bacteria adhesion ability for potential sustainable protective clothing applications

Multifunctional antibacterial surfaces are playing an essential role in various areas. Smart antibacterial materials equipped with switchable "bacteria-killing" and "bacteria-releasing" abilities have been created by scientists. However, most of them are either biologically incompatible, or complex fabricating procedures, or cannot prevent themselves from being attached by bacteria. In this work, a double-layer smart antibacterial surface was created easily by simple surface initiate atom transfer radical polymerization: the upper layer PSBMA provides anti-bacteria adhesion capacity, the NCl bond can show bacteria-killing ability and the under layer PNIPAM can exhibit bacteria-releasing property. Remarkably, the NCl bond can interconvert with the NH bond easily, which allows switching between bacteria-killing and bacteria-releasing. As a result, the functional cotton fabrics can resist about 99.66 % of bacteria attaching, kill nearly 100 % of attached bacteria after 5 min contacting and release about 99.02 % of the formerly attached bacteria. Furthermore, the functional cotton fabric kept excellent anti-bacteria adhesion ability (about 99.27 %) and bacteria-releasing capacity (about 98.30 %) after 9 cycles of re-chlorination. In general, a reversible "bacteria-killing" and "bacteria-releasing" cotton fabric was fabricated with well anti-bacteria adhesion capacity in a simple way, and this smart multifunctional cotton fabric shows a great potential application in reusable protective clothing.

The Rise of Electroactive Materials in Face Masks for Preventing Virus Infections

Air-transmitted pathogens may cause severe epidemics, posing considerable threats to public health and safety. Wearing a face mask is one of the most effective ways to prevent respiratory virus infection transmission. Especially since the new coronavirus pandemic, electroactive materials have received much attention in antiviral face masks due to their highly efficient antiviral capabilities, flexible structural design, excellent sustainability, and outstanding safety. This review first introduces the mechanism for preventing viral infection or the inactivation of viruses by electroactive materials. Then, the applications of electrostatic-, conductive-, triboelectric-, and microbattery-based materials in face masks are described in detail. Finally, the problems of various electroactive antiviral materials are summarized, and the prospects for their future development directions are discussed. In conclusion, electroactive materials have attracted great attention for antiviral face masks, and this review will provide a reference for materials scientists and engineers in antiviral materials and interfaces.

Nanopatterned Electroactive Polylactic Acid Nanofibrous MOFilters for Efficient PM0.3 Filtration and Bacterial Inhibition

Biodegradable polylactic acid (PLA) nanofibrous membranes (NFMs) hold great potential to address the increasing airborne particulate matter (PM) and dramatic accumulation of plastic/microplastic pollution. However, the field of PLA NFM-based filters is still in its infancy, frequently dwarfed by the bottlenecks regarding relatively low surface activity, poor electroactivity, and insufficient PM capturing mechanisms. This effort discloses a microwave-assisted approach to minute-level synthesis of dielectric ZIF-8 nanocrystals with high specific surface area (over 1012 m2/g) and ultrasmall size (∼240 nm), which were intimately anchored onto PLA nanofibers (PLA@ZIF-8) by a combined "electrospinning-electrospray" strategy. This endowed the PLA@ZIF-8 NFMs with largely increased electroactivity in terms of elevated dielectric coefficient (an increase of 202%), surface potential (up to 5.8 kV), and triboelectric properties (output voltage of 30.8 V at 10 N, 0.5 Hz). Given the profound control over morphology and electroactivity, the PLA@ZIF-8 NFMs exhibited efficient filtration of PM0.3 (97.1%, 85 L/min) with a decreased air resistance (592.5 Pa), surpassing that of the pure PLA counterpart (88.4%, 650.9 Pa). This was essentially ascribed to realization of multiple filtration mechanisms for PLA@ZIF-8 NFMs, including enhanced physical interception, polar interactions, and electrostatic adsorption, and the unique self-charging function triggered by airflow vibrations. Moreover, perfect antibacterial performance was achieved for PLA@ZIF-8, showing ultrahigh inhibition rates of 99.9 and 100% against E. coli and S. aureus, respectively. The proposed hierarchical structuring strategy, offering the multifunction integration unattainable with conventional methods, may facilitate the development of biodegradable long-term air filters.

Preparation and Functionalization of Polymers with Antibacterial Properties-Review of the Recent Developments

The presence of antibiotic-resistant bacteria in our environment is a matter of growing concern. Consumption of contaminated drinking water or contaminated fruit or vegetables can provoke ailments and even diseases, mainly in the digestive system. In this work, we present the latest data on the ability to remove bacteria from potable water and wastewater. The article discusses the mechanisms of the antibacterial activity of polymers, consisting of the electrostatic interaction between bacterial cells and the surface of natural and synthetic polymers functionalized with metal cations (polydopamine modified with silver nanoparticles, starch modified with quaternary ammonium or halogenated benzene). The synergistic effect of polymers (N-alkylaminated chitosan, silver doped polyoxometalate, modified poly(aspartic acid)) with antibiotics has also been described, allowing for precise targeting of drugs to infected cells as a preventive measure against the excessive spread of antibiotics, leading to drug resistance among bacteria. Cationic polymers, polymers obtained from essential oils (EOs), or natural polymers modified with organic acids are promising materials in the removal of harmful bacteria. Antimicrobial polymers are successfully used as biocides due to their acceptable toxicity, low production costs, chemical stability, and high adsorption capacity thanks to multi-point attachment to microorganisms. New achievements in the field of polymer surface modification in order to impart antimicrobial properties were summarized.

Rapid and persistent bactericidal cotton fabrics finished facilely with reactive N-halamine

Cotton fabrics (CFs) with persistent and rapid bactericidal capability would be of great significance for daily health protection because CFs are very suitable for the growth and reproduction of microorganisms. Herein, we developed a reactive N-halamine compound, 3-(3-hydroxypropyl diisocyanate)-5,5-dimethylhydantoin (IPDMH), that can be covalently bound to a CF to generate a bactericidal CF after chlorination (CF-DMF-Cl) without damaging its surface morphology. The antibacterial rates of CF-DMF-Cl (0.5 wt% IPDMH) against the gram-negative bacterium Escherichia coli (E. coli) and gram-positive bacterium Staphylococcus aureus (S. aureus) reached 99.99 % and were maintained at 90 % (against E. coli) and 93.5 % (against S. aureus) after 50 laundering cycles. The combination of contact killing and release killing mechanisms by CF-PDM-Cl leads to its rapid and persistent bactericidal activity. In addition, CF-DMF-Cl exhibits adequate biocompatibility, well-maintained mechanical properties, air/water vapor permeability and whiteness. Therefore, the proposed CF-DMF-Cl has great potential applications as a bactericidal CF for use in medical textiles, sportswear, home dressings, and so on.

Development of Electromagnetic-Wave-Shielding Polyvinylidene Fluoride-Ti3C2Tx MXene-Carbon Nanotube Composites by Improving Impedance Matching and Conductivity

Absorption-dominated electromagnetic interference (EMI) shielding is attained by improving impedance matching and conductivity through structural design. Polyvinylidene fluoride (PVDF)-Ti₃C₂T_x MXene-single-walled carbon nanotubes (SWCNTs) composites with layered heterogeneous conductive fillers and segregated structures were prepared through electrostatic flocculation and hot pressing of the PVDF composite microsphere-coated MXene and SWCNTs in a layer-by-layer fashion. Results suggest that the heterogeneous fillers improve impedance matching and layered coating, and hot compression allows the MXene and SWCNTs to form a continuous conducting network at the PVDF interface, thereby conferring excellent conductivity to the composite. The PVDF-MXene-SWCNTs composite showed a conductivity of 2.75 S cm^-1 at 2.5% MXene and 1% SWCNTs. The EMI shielding efficiency (SE) and contribution from absorption loss to the total EMI SE of PVDF-MXene-SWCNTs were 46.1 dB and 85.7%, respectively. Furthermore, the PVDF-MXene-SWCNTs composite exhibited excellent dielectric losses and impedance matching. Therefore, the layered heteroconductive fillers in a segregated structure optimize impedance matching, provide excellent conductivity, and improve absorption-dominated electromagnetic shielding.