Polypyrrole/ZnIn2S4 composite photocatalyst for enhanced mineralization of chloramphenicol under visible light

Efficient degradation of the refractory organic pollutant by underwater bubbling pulsed discharge plasma: performance, degradation pathway, and toxicity prediction

It is essential to develop an efficient technology for the elimination of refractory contaminants due to their high toxicity. In this study, a novel underwater bubbling pulsed discharge plasma (UBPDP) system was proposed for the degradation of Orange II (OII). The degradation performance experiments showed that by enhancing the peak voltage and pulse frequency, the degradation efficiency of OII increased gradually. The removal efficiencies under different air flow rates were close. Reducing OII concentration and solution conductivity could promote the elimination of OII. Compared with neutral and alkaline conditions, acidic condition was more beneficial to OII degradation. The active species including ·OH, ·O2-, 1O2, and hydrated electrons were all involved in OII degradation. The concentrations of O3 and H2O2 in OII solution were lower than those in deionized water. During discharge, the solution pH increased while conductivity decreased. The variation of UV-vis spectra with treatment time indicated the effective decomposition of OII. Possible degradation pathways were speculated based on LC-MS. The toxicity of intermediate products was predicted by the Toxicity Estimation Software Tool. Coexisting constituents including Cl-, SO42-, HCO3-, and humic acid had a negative effect on OII removal. Finally, the comparison with other technology depicted the advantage of the UBPDP system.

A review on potential sulfide-based ternary chalcogenides for emerging photo-assisted water purification applications

Sulfide-based ternary chalcogenides have been recognized widely as exceptional photocatalysts, thanks to their narrow band gap enabling them to harvest solar energy to the maximum extent. They provide excellent optical, electrical, and catalytic performance and are of abundant use as a heterogeneous catalyst. Among sulfide-based ternary chalcogenides, compounds exhibiting AB2X4 structure form a new class of materials with excellent stability in photocatalytic performance. In the AB2X4 family of compounds, ZnIn2S4 is one of the top performing photocatalyst for energy and environmental applications. However, to date, only limited information is available on the mechanism behind the photo-induced migration of charge carriers in ternary sulfide chalcogenides. Ternary sulfide chalcogenides with their visible region activity and substantial chemical stability greatly depend on crystal structure, morphology, and optical characteristics for their photocatalytic activity. Hence, in this review, a comprehensive assessment of the reported strategies for enhancement of the photocatalytic efficiency of this compound is presented. In addition, a meticulous investigation of the applicability of ternary sulfide chalcogenide compound ZnIn2S4, in particular, has been delivered. Also, the photocatalytic behavior of other sulfide-based ternary chalcogenides for water remediation applications has also been briefed. Finally, we conclude with an insight into the challenges and future advancements in the exploration of ZnIn2S4-based chalcogenide as a photocatalyst for various photo-responsive applications. It is believed that this review could contribute to a better understanding of ternary chalcogenide semiconductor photocatalysts for solar-driven water treatment applications.

Removal of chloramphenicol antibiotics in natural and engineered water systems: Review of reaction mechanisms and product toxicity

Chloramphenicol antibiotics are widely applied in human and veterinary medicine. They experience natural attenuation and/or chemical degradation during oxidative water treatment. However, the environmental risks posed by the transformation products of such organic contaminants remain largely unknown from the literature. As such, this review aims to summarize and analyze the elimination efficiency, reaction mechanisms, and resulting product risks of three typical chloramphenicol antibiotics (chloramphenicol, thiamphenicol, and florfenicol) from these transformation processes. The obtained results suggest that limited attenuation of these micropollutants is observed during hydrolysis, biodegradation, and photolysis. Comparatively, prominent abatement of these compounds is accomplished using advanced oxidation processes; however, efficient mineralization is still difficult given the formation of recalcitrant products. The in silico prediction on the multi-endpoint toxicity and biodegradability of different products is systematically performed. Most of the transformation products are estimated with acute and chronic aquatic toxicity, genotoxicity, and developmental toxicity. Furthermore, the overall reaction mechanisms of these contaminants induced by multiple oxidizing species are revealed. Overall, this review unveils the non-overlooked and serious secondary risks and biodegradability recalcitrance of the degradation products of chloramphenicol antibiotics using a combined experimental and theoretical method. Strategic improvements of current treatment technologies are strongly recommended for complete water decontamination.

Role of polyaniline in accomplishing a sustainable environment: recent trends in polyaniline for eradicating hazardous pollutants

Attaining a sustainable environment has become a prime area of research interest, as it is an utmost necessity for a healthy life. Hence, ample studies have been carried out in adopting different processes and utilizing various materials to attain the goal. Herein, we present an exclusive discussion on one such material, i.e., polyaniline (PANI) and its derivatives. Being an intrinsic conducting type, it has grabbed more attention due to its durability in different doped/un-doped states, promptness in structural alteration, and solution processability. This review presents an exhaustive discussion on published reports showing utilization of PANI and its derivative in various forms like pure and composites, for cleaning the environment through adsorption, photodegradation, etc., and the various methods adopted in order to achieve an optimum operating condition to obtain the maximum outcome. In addition to these merits and demerits, various technical challenges faced with materials have been also presented. Therefore, it is expected that this piece of work, presenting the exhaustive discussion on PANI and; its derivatives would help to develop a better understanding of this excellent conducting polymer PANI and provide a state of art on the role of this material for attaining sustainable surroundings for the living beings.

Ni-Fe oxide-PEDOT modified anode coupled with BAF treating ammonia and nitrite in recirculating seawater of aquaculture system

Efficient ammonia and nitrite removal in low nutrient recirculating seawater of recirculating aquaculture system (RAS) is critical for healthy cultivation. However, it is hard for conventional biological aerated filters (BAFs) to meet this demand under short hydraulic retention time (HRT). The electrooxidation-BAFs (E-BAFs) were constructed for efficient seawater treatment in a RAS of Sebastes schlegelii, with high activity anodic catalyst Ni-Fe oxide-PEDOT. Satisfactory ammonia removal (88.2% in E-BAFs, 33.7% higher than the control, stage 3) and nitrite removal (69.9 % in E-BAFs, 45.3% in the control) were achieved at HRT of 50 min. The proportion of nitrifying bacteria (Nitrospira, Nitrosomonas and Nitrosopumilus) and nitrification/denitrification genes (amoCAB, nxrAB, narGHI, et. al) were higher in E-BAFs than the control, suggesting better potential in functional bacteria enrichment. Aerobic colony number in RAS with E-BAFs was lower and specific growth rate (SGR) of Sebastes schlegelii (3.79%) was significantly higher, indicating a better culture effect.

ZnIn2 S4 -Based Photocatalysts for Energy and Environmental Applications

As a fascinating visible-light-responsive photocatalyst, zinc indium sulfide (ZnIn₂ S₄ ) has attracted extensive interdisciplinary interest and is expected to become a new research hotspot in the near future, due to its nontoxicity, suitable band gap, high physicochemical stability and durability, ease of synthesis, and appealing catalytic activity. This review provides an overview on the recent advances in ZnIn₂ S₄ -based photocatalysts. First, the crystal structures and band structures of ZnIn₂ S₄ are briefly introduced. Then, various modulation strategies of ZnIn₂ S₄ are outlined for better photocatalytic performance, which includes morphology and structure engineering, vacancy engineering, doping engineering, hydrogenation engineering, and the construction of ZnIn₂ S₄ -based composites. Thereafter, the potential applications in the energy and environmental area of ZnIn₂ S₄ -based photocatalysts are summarized. Finally, some personal perspectives about the promises and prospects of this emerging material are provided.

Conducting polymers: a comprehensive review on recent advances in synthesis, properties and applications

Conducting polymers are extensively studied due to their outstanding properties, including tunable electrical property, optical and high mechanical properties, easy synthesis and effortless fabrication and high environmental stability over conventional inorganic materials. Although conducting polymers have a lot of limitations in their pristine form, hybridization with other materials overcomes these limitations. The synergetic effects of conducting polymer composites give them wide applications in electrical, electronics and optoelectronic fields. An in-depth analysis of composites of conducting polymers with carbonaceous materials, metal oxides, transition metals and transition metal dichalcogenides etc. is used to study them effectively. Here in this review we seek to describe the transport models which help to explain the conduction mechanism, relevant synthesis approaches, and physical properties, including electrical, optical and mechanical properties. Recent developments in their applications in the fields of energy storage, photocatalysis, anti-corrosion coatings, biomedical applications and sensing applications are also explained. Structural properties play an important role in the performance of the composites.

Visible light-activated self-powered photoelectrochemical aptasensor for ultrasensitive chloramphenicol detection based on DFT-proved Z-scheme Ag2CrO4/g-C3N4/graphene oxide

A visible light self-powered photoelectrochemical (PEC) aptasensor based on silver chromate particles, graphitic carbon nitride nanosheets and graphene oxide sheets (Ag₂CrO₄/g-C₃N₄/GO) for the ultrasensitive detection of chloramphenicol (CAP) was reported in this work. g-C₃N₄ was considered to be the fundamental photoelectric material because of its great oxidation ability of photogenerated hole as well as excellent biocompatibility and low toxicity. However, the narrow light absorption range and rapid carrier recombination rate limit the application of pure g-C₃N₄. Herein, Ag₂CrO₄ and GO as photosensitizer were introduced to improve the photoelectric properties of g-C₃N₄. The photocurrent of the developed ternary composite was about 3 times higher than that of pristine g-C₃N₄, which proves it can be used as a suitable photoelectric active material. Moreover, the mechanism of Z-scheme electron transfer path was proved by density functional theory (DFT) calculation. The fabricated PEC aptasensor exhibited high sensitivity toward CAP with a wide liner response of 0.5 pM to 50 nM and a detection limit of 0.29 pM. The specific recognition mechanism and excellent sensing performance indicated this aptasensor could serve as a useful tool for selective and ultrasensitive CAP detection in practical analysis.

Recent Developments about Conductive Polymer Based Composite Photocatalysts

Conductive polymers have been widely investigated in various applications. Several conductive polymers, such as polyaniline (PANI), polypyrrole (PPy), poly(3,4-ethylenedioxythiophene) (PEDOT)), and polythiophene (PTh) have been loaded with various semiconductor nanomaterials to prepare the composite photocatalysts. However, a critical review of conductive polymer-based composite photocatalysts has not been available yet. Therefore, in this review, we summarized the applications of conductive polymers in the preparation of composite photocatalysts for photocatalytic degradation of hazardous chemicals, antibacterial, and photocatalytic hydrogen production. Various materials were systematically surveyed to illustrate their preparation methods, morphologies, and photocatalytic performances. The synergic effect between conductive polymers and semiconductor nanomaterials were observed for a lot of composite photocatalysts. The band structures of the composite photocatalysts can be analyzed to explain the mechanism of their enhanced photocatalytic activity. The incorporation of conductive polymers can result in significantly improved visible-light driven photocatalytic activity by enhancing the separation of photoexcited charge carriers, extending the light absorption range, increasing the adsorption of reactants, inhibiting photo-corrosion, and reducing the formation of large aggregates. This review provides a systematic concept about how conductive polymers can improve the performance of composite photocatalysts.

Insights into the generation of reactive oxygen species (ROS) over polythiophene/ZnIn2S4 based on different modification processing

Different ˙O₂⁻ and ¹O₂ were generated from blended and surface-modified samples, respectively.