Epsilon-poly-l-lysine decorated ordered mesoporous silica contributes to the synergistic antifungal effect and enhanced solubility of a lipophilic drug

Snowflake Cu2S@ZIF-67: A novel heterostructure substrate for enhanced adsorption and sensitive detection in BPA

Developing semiconductor substrates with superior stability and sensitivity is challenging in surface-enhanced Raman scattering (SERS) research. Here, a snowflake Cu2S@ZIF-67 heterostructure was fabricated using a straightforward method, exhibiting a notable enhancement factor of 9.0 × 109 and a limit of detection (LOD) of 10-14 M for methylene blue (MB). In addition, the Cu2S@ZIF-67 heterostructure substrate demonstrates outstanding homogeneity (relative standard deviation (RSD) = 9.2%) and stability (120 days). Employing Cu2S generates highly sensitive hotspots via an electromagnetic (EM) mechanism, and the growth of ZIF-67 on its surface augments the adsorption capacity and charge transfer capability (chemical mechanism, CM), thereby enhancing the SERS detection sensitivity. Furthermore, the Cu2S@ZIF-67 heterostructure, which was used as a SERS substrate, facilitated the detection of bisphenol A (BPA) with an LOD of 10-11 M. The Cu2S@ZIF-67 heterostructure substrate has excellent selectivity and anti-interference, which is very suitable for BPA detection in complex environment applications. The accuracy of the Cu2S@ZIF-67 heterostructure as a SERS substrate for detecting BPA in real water samples (water bottles, tap water, and pure milk) was confirmed by comparison with high-performance liquid chromatography (HPLC). These results demonstrate that through the rational design of heterostructures can achieve the quantitative and accurate detection of hazardous substances in food and the environment can be achieved.

Remarkable enhancement of cinnamaldehyde antimicrobial activity encapsulated in capped mesoporous nanoparticles: A new "nanokiller" approach in the era of antimicrobial resistance

Combating antimicrobial resistance is one of the biggest health challenges because of the ineffectiveness of standard biocide treatments. This challenge could be approached using natural products, which have demonstrated powerful therapeutics against multidrug-resistant microbes. In the present work, a nanodevice consisting of mesoporous silica nanoparticles loaded with an essential oil component (cinnamaldehyde) and functionalized with the polypeptide ε-poly-l-lysine is developed and used as an antimicrobial agent. In the presence of the corresponding stimuli (i.e., exogenous proteolytic enzymes from bacteria or fungi), the polypeptide is hydrolyzed, and the cinnamaldehyde delivery is enhanced. The nanodevice's release mechanism and efficacy are evaluated in vitro against the pathogenic microorganisms Escherichia coli, Staphylococcus aureus, and Candida albicans. The results demonstrate that the new device increases the delivery of the cinnamaldehyde via a biocontrolled uncapping mechanism triggered by proteolytic enzymes. Moreover, the nanodevice notably improves the antimicrobial efficacy of cinnamaldehyde when compared to the free compound, ca. 52-fold for E. coli, ca. 60-fold for S. aureus, and ca. 7-fold for C. albicans. The enhancement of the antimicrobial activity of the essential oil component is attributed to the decrease of its volatility due to its encapsulation in the porous silica matrix and the increase of its local concentration when released due to the presence of microorganisms.

Covalent modification of γ-cyclodextrin with geraniol: An antibacterial agent with good thermal stability, solubility and biocompatibility

Geraniol (Ger) is an essential oil molecule with excellent biological activity. High hydrophobicity and volatility limit its practical application. Cyclodextrins (CDs) are water-soluble cyclic oligosaccharides with hydrophobic cavities. Physical encapsulation of CDs to improve the solubility and stability of essential oil molecules is not satisfactory. Therefore, this study synthesized the γ-CD derivative (γ-CD-Ger) by grafting Ger onto γ-CD using a bromide-mediated method. Compared to the inclusion complexes (γ-CD/Ger) formed by both, the derivatives exhibit better solubility and thermal stability. The derivative has better antibacterial activity when the ratio of γ-CD to Ger was 1:2. In addition, the derivatives did not exhibit cytotoxic and hemolytic properties. These results indicate that this research provides a water-soluble antibacterial agent with a wide range of promising applications and offers new ideas for the application of alcohol hydrophobic molecules in aqueous systems.

Hyaluronic acid-modified mesoporous silica nanoprobes for target identification of atherosclerosis

Rupture of vulnerable plaque and secondary thrombosis caused by atherosclerosis are one of the main causes of acute cardiovascular and cerebrovascular events, and it is urgent to develop an in-situ, noninvasive, sensitive and targeted detection method at molecular level. We chose CD44, a specific receptor highly expressed on the surface of macrophages, as the target of the molecular probe, and modified the CD44 ligand HA onto the surface of Gd2O3@MSN, constructing the MRI imaging nanoprobe HA-Gd2O3@MSN for targeted recognition of atherosclerosis. The fundamental properties of HA-Gd2O3@MSN were initially investigated. The CCK-8, hemolysis, hematoxylin-eosin staining tests and blood biochemical assays confirmed that HA-Gd2O3@MSN possessed excellent biocompatibility. Laser confocal microscopy, cellular magnetic resonance imaging, flow cytometry and immunohistochemistry were used to verify that the nanoprobes had good targeting properties. The in vivo targeting performance of the nanoprobes was further validated by employing a rabbit atherosclerosis animal model. In summary, the synthesized HA-Gd2O3@MSN nanoprobes have excellent biocompatibility properties as well as good targeting properties. It could provide a new technical tool for early identification of atherosclerosis.

Programmed Co-delivery of tamoxifen and docetaxel using lipid-coated mesoporous silica nanoparticles for overcoming CYP3A4-mediated resistance in triple-negative breast cancer treatment

PURPOSE

This study aims to revolutionize the treatment of aggressive triple-negative breast cancer (TNBC), notorious for its resistance to standard therapies. By ingeniously combining Tamoxifen (TMX) and Docetaxel (DTX) within a lipid-coated mesoporous silica nanoparticle (LP-MSN) delivery system, we intend to enhance therapeutic efficacy while circumventing DTX resistance mediated by CYP3A4 expression.

METHODS

We rigorously tested TNBC cell lines to confirm the responsiveness to Docetaxel (DTX) and Tamoxifen (TMX). We adeptly engineered LP-MSN nanoparticles and conducted a thorough examination of the optimal drug release strategy, evaluating the LP-MSN system's ability to mitigate the impact of CYP3A4 on DTX. Additionally, we comprehensively analyzed its pharmacological performance.

RESULTS

Our innovative approach utilizing TMX and DTX within LP-MSN showcased remarkable efficacy. Sequential drug release from the lipid layer and mesoporous core curbed CYP3A4-mediated metabolism, substantially enhancing cytotoxic effects on TNBC cells without harming normal cells.

CONCLUSION

This pioneering research introduces a breakthrough strategy for tackling TNBC. By capitalizing on synergistic TMX and DTX effects via LP-MSN, we surmount drug resistance mediated by CYP3A4. This advancement holds immense potential for transforming TNBC treatment, warranting further clinical validation.

Heterogeneous Cu2O-SnO2 doped polydopamine fenton-like nanoenzymes for synergetic photothermal-chemodynamic antibacterial application

Wound infections caused by drug-resistant bacteria pose a great threat to human health, and the development of non-drug-resistant antibacterial approaches has become a research priority. In this study, we developed Cu2O-SnO2 doped polydopamine (CSPDA) triple cubic antibacterial nanoenzymes with high photothermal conversion efficiency and good Fenton-like catalase performance. CSPDA antibacterial nanoplatform can catalyze the generation of hydroxyl radical (·OH) from H2O2 at low concentration (50 μg∙mL-1) under 808 nm near-infrared (NIR) irradiation to achieve a combined photothermal therapy (PTT) and chemodynamic therapy (CDT). And the CSPDA antibacterial nanoplatform displays broad-spectrum and long-lasting antibacterial effects against both Gram-negative Escherichia coli (100 %) and Gram-positive Staphylococcus aureus (100 %) in vitro. Moreover, in a mouse wound model with mixed bacterial infection, the nanoplatform demonstrates a significant in vivo bactericidal effect while remaining good cytocompatible. To conclude, this study successfully develops an efficient and long-lasting bacterial infection treatment system. This system provided different options for future studies on the design of synergistic antimicrobial therapy. Hence, the as-synthesized synergetic photothermal therapy and chemodynamic therapy nanoenzymes have rapid and long-term bactericidal ability, well-conglutinant performance and effectively preventing wound infection for clinical application. STATEMENT OF SIGNIFICANCE: Wound infections caused by drug-resistant bacteria pose a great threat to human health, and the development of non-drug-resistant antibacterial approaches has become a research priority. In this study, we developed Cu2O-SnO2 doped polydopamine (CSPDA) triple cubic yolk-like antibacterial nanoenzymes with high photothermal conversion efficiency and Fenton-like catalase effect for photothermal and Chemodynamic antibacterial therapy, Meanwhile, the nanocomposites exhibit good antibioadhesion in a natural water environment for a long-time immersion. In conclusion, this study successfully develops an efficient and long-lasting bacterial infection treatment system. These findings present a pioneering strategy for future research on the design of synergistic antibacterial and antibioadhesive systems.

The Exploitation of pH-Responsive Eudragit-Coated Mesoporous Silica Nanostructures in the Repurposing of Terbinafine Hydrochloride for Targeted Colon Cancer Inhibition: Design Optimization, In Vitro Characterization, and Cytotoxicity Assessment

Targeted drug delivery is achieving great success in cancer therapy due to its potential to deliver drugs directly to the action site. Terbinafine hydrochloride (TER) is a broad-spectrum anti-fungal drug that has been found to have some potential anti-tumor effects in the treatment of colon cancer. We aimed here to design and develop pH-sensitive Eudragit (Eud)-coated mesoporous silica nanostructures (MSNs) to control drug release in response to changes in pH. The diffusion-supported loading (DiSupLo) technique was applied for loading TER into the MSNs. The formulation was optimized by a D-optimal design, which permits the concurrent assessment of the influence of drug/MSN%, coat concentration, and MSN type on the drug entrapment efficiency (EE) and its release performance. The optimal formula displayed a high EE of 96.49%, minimizing the release in pH 1.2 to 16.15% and maximizing the release in pH 7.4 to 78.09%. The cytotoxicity of the optimal formula on the colon cancer cells HT-29 was higher than it was with TER alone by 2.8-fold. Apoptosis in cancer cells exposed to the optimum formula was boosted as compared to what it was with the plain TER by 1.2-fold and it was more efficient in arresting cells during the G0/G1 and S stages of the cell cycle. Accordingly, the repurposing of TER utilizing Eud/MSNs is a promising technique for targeted colon cancer therapy.

Nanocomposite based on Gd2O3 nanoparticles and drug 5-fluorouracil as potential theranostic nano-cargo system

We have prepared silica matrix with hexagonal symmetry of pores (SBA-15) and loaded it with anticancer drug 5-Fluorouracil (5-FU) to promote it as a drug delivery system. Gd2O3 nanoparticles were incorporated into the matrix to enhance nanosystems applicability as contrast agent for MRI, thus enabled this nanocomposite to be used as multifunctional nano-based therapeutic agent. Drug release profile was obtained by UV-VIS spectroscopy, and it indicates the prolongated release of 5-FU during the first hours and the total release after 5 h. The cytotoxicity tests using MTT-assay, fluorescent microscopy, bright-field microscopy, and flow cytometry were carried out using human glioma U87 MG cells and SK BR 3 cells. The nanocomposite with anticancer drug (Gd2O3/SBA-15/5FU) showed toxic behaviour towards studied cells, unlike nanocomposite without drug (Gd2O3/SBA-15) that was non-toxic. Our drug delivery system was designed to minimalize negative effect of Gd3+ ions at magnetic resonance imaging and drug 5-FU on healthy cells due to their encapsulation into biocompatible silica matrix, so the Gd3+ ions are more stable (in comparison to chelates), lower therapeutic dose of 5-FU is needed and its prolongated release from silica pores was confirmed. Very good T1 contrast in MR images was observed even at low concentrations, thus this nanosystem can be potentially used as contrast imaging agent.

Toxicity evaluation of silica nanoparticles for delivery applications

Silica nanoparticles (SiNPs) are being explored as nanocarriers for therapeutics delivery, which can address a number of intrinsic drawbacks of therapeutics. To translate laboratory innovation into clinical application, their potential toxicity has been of great concern. This review attempts to comprehensively summarize the existing literature on the toxicity assessment of SiNPs. The current data suggest that the composition of SiNPs, their physicochemical properties, their administration route, their frequency and duration of administration, and the sex of animal models are related to their tissue and blood toxicity, immunotoxicity, and genotoxicity. However, the correlation between in vitro and in vivo toxicity has not been well established, mainly because both the in vitro and the in vivo-dosed quantities are unrealistic. This article also discusses important factors to consider in the toxicology of SiNPs and current approaches to reducing their toxicity. The aim is to give readers a better understanding of the toxicology of silica nanoparticles and to help identify key gaps in knowledge and techniques.

Concomitant Effect of Quercetin and Its Copper Complex in the Development of Sustained-Release Nanoparticles of Polycaprolactone, Used for the Treatment of Skin Infection

The study aimed to improve the treatment of impetigo with naturally occurring quercetin and its copper-quercetin (Cu-Q) complex by preparing sustained-release (SR) nanoparticles of polycaprolactone (PCL). The solvent evaporation method was used for the copper-quercetin (Cu-Q) complex formation, and their PCL nanoparticles (PCL-NPs, Q-PCL-NPs, and Cu-Q-PCL-NPs) were prepared by the high-pressure homogenization method. Synthesis of nanoparticles was confirmed by their physicochemical and antibacterial properties of quercetin against Gram-positive as well as Gram-negative bacteria. The percentage loading efficiency of quercetin and release in 100 mM of phosphate buffer pH 7.4 and 5.5 at 37 °C was found to be more than 90% after 24 h with the zero-order release pattern. Minimum inhibitory concentration of nanoparticles was found to increase threefold in the case of Cu-Q-PCL-NPs may be due to the synergistic antibacterial behavior. Scanning electron microscopy showed spherical nanoparticles, and surface roughness was confirmed by atomic force microscopy analysis. Fortunately, no sign of irritation on rat skin even at 3%, was seen. In vitro antioxidant assay by 2,2-diphenyl-1-picrylhydrazyl reduction was found to be ≤80 ± 0.02% which confirmed their scavenging activity. Interestingly, for the ex vivo study, the tape-stripping model was applied against Staphylococcus aureus containing rats and showed the formation of the epidermal layer within 4-5 days. Confirmation of antibacterial activity of pure quercetin, from Cu-Q complex, and their SR release from Q-PCL-NPs and Cu-Q-PCL-NPs was considered an effective tool for the treatment of skin diseases and can be used as an alternative of already resistant ciprofloxacin in impetigo.

Repurposed itraconazole for use in the treatment of malignancies as a promising therapeutic strategy

Understanding cancer biology and the development of novel agents for cancer treatment has always been the goal of cancer researchers. However, the research and development of new drugs is hindered by its long development time, exorbitant cost, high regulatory hurdles, and staggering failure rates. Given the challenges involved drug development for cancer therapies, alternative strategies, in particular the repurposing of 'old' drugs that have been approved for other indications, are attractive. Itraconazole is an FDA-approved anti-fungal drug of the triazole class, and has been used clinically for more than 30 years. Recent drug repurposing screens revealed itraconazole exerts anti-cancer activity via inhibiting angiogenesis and multiple oncogenic signaling pathways. To explore the potential utilization of itraconazole in different types of malignancies, we retrieved the published literature relating to itraconazole in cancer and reviewed the mechanisms of itraconazole in preclinical and clinical cancer studies. Current research predicts the hedgehog signaling pathway as the main target by which itraconazole inhibits a variety of solid and hematological cancers. As clinical trial results become available, itraconazole could emerge as a new antitumor drug that can be used in combination with first-line antitumor drugs.

One-pot synthesis of α-Linolenic acid nanoemulsion-templated drug-loaded silica mesocomposites as efficient bactericide against drug-resistant Mycobacterium tuberculosis

Nowadays, pathogenic infection has posed a severe threat to the public health and environmental sanitation, urging a continuous search of efficacious and safe bactericidal agents of various formulated forms. Here, a facile one-pot hydrothermal preparation of mesoporous silica nanoparticles using ultrasonication-assisted nanoemulsion of α-Linolenic acid (α-LA) as template was developed. The formed silica mesocomposite at water/fatty-acid surface provides an easy yet green synthesis route, which can be generalized for the further encapsulation of hydrophobic drugs such as antimycobacterial Rifampicin (RIF). The obtained α-LA nanoemulsion-templated silica nanoparticles (LNS NPs), with a weight content of ∼17% α-LA in the composite, showed apparent antibacterial effect against Staphylococcus aureus (S. aureus). By comparison, the removal of α-LA from the silica nanoparticles (LNS-1 NPs) resulted in the composite of enlarged pore size with negligible bactericidal activities. Notably, the Isoniazide (INH) and Rifampicin (RIF)-encapsulated LNS NPs exhibited outstanding antimycobacterial activity against both drug-sensitive and drug-resistant Mycobacterium tuberculosis (M. tuberculosis). The obtained highly biocompatible, biosafe and low-energy consumptive α-LA-contained mesostructured silica-based bactericide holds promising therapeutic potentials to tackle the emerging drug-resistant infectious microbes.

Dissection of the antibacterial mechanism of zinc oxide nanoparticles with manipulable nanoscale morphologies

Despite the extensive uses of ZnO nanoparticles as promising antimicrobial agents to tackle the severe microbial infections, the systematic antibacterial studies on ZnO nanoparticles with manipulable nanoscale morphologies at the genetic expression level remain ill-defined. In this study, via a controllable thermal decomposition, ZnO nanoparticles of different morphologies were facilely prepared. Additionally, the surface PEGylation of ZnO was conducted to obtain the nanoparticles of low biotoxicity. While all the prepared ZnO nanoparticles exhibited the significantly chemical activities, the pronounced antibacterial effect of obtained ZnO nanoparticles was also identified, in which the ultra-small ones (~5 nm) showed the best performance. Moreover, the antibacterial activities of ZnO nanoparticles were studied by bacterial nucleic acid leakage, alkaline phosphatase, biofilm and reactive oxygen species (ROS) assays. Furthermore, the transcriptome analysis of ZnO nanoparticles with different morphologies against Escherichia coli (E. coli) revealed the underlying antibacterial mechanism involved the signal transduction, material transport, energy metabolism and other biological processes. Therefore, the cost-effective preparation of ZnO nanoparticles with distinct morphological features provides insights for the development of application specific antibacterial agents.

Antibacterial and Antifungal Properties of Silver Nanoparticles-Effect of a Surface-Stabilizing Agent

The biocidal properties of silver nanoparticles (AgNPs) prepared with the use of biologically active compounds seem to be especially significant for biological and medical application. Therefore, the aim of this research was to determine and compare the antibacterial and fungicidal properties of fifteen types of AgNPs. The main hypothesis was that the biological activity of AgNPs characterized by comparable size distributions, shapes, and ion release profiles is dependent on the properties of stabilizing agent molecules adsorbed on their surfaces. Escherichia coli and Staphylococcus aureus were selected as models of two types of bacterial cells. Candida albicans was selected for the research as a representative type of eukaryotic microorganism. The conducted studies reveal that larger AgNPs can be more biocidal than smaller ones. It was found that positively charged arginine-stabilized AgNPs (ARGSBAgNPs) were the most biocidal among all studied nanoparticles. The strongest fungicidal properties were detected for negatively charged EGCGAgNPs obtained using (-)-epigallocatechin gallate (EGCG). It was concluded that, by applying a specific stabilizing agent, one can tune the selectivity of AgNP toxicity towards desired pathogens. It was established that E. coli was more sensitive to AgNP exposure than S. aureus regardless of AgNP size and surface properties.

The immunogenic reaction and bone defect repair function of ε-poly-L-lysine (EPL)-coated nanoscale PCL/HA scaffold in rabbit calvarial bone defect

Tissue engineering is a promising strategy for bone tissue defect reconstruction. Immunogenic reaction, which was induced by scaffolds degradation or contaminating microorganism, influence cellular activity, compromise the efficiency of tissue engineering, or eventually lead to the failure of regeneration. Inhibiting excessive immune response through modulating scaffold is critical important to promote tissue regeneration. Our previous study showed that ε-poly-L-lysine (EPL)-coated nanoscale polycaprolactone/hydroxyapatite (EPL/PCL/HA) composite scaffold has enhanced antibacterial and osteogenic properties in vitro. However, the bone defect repair function and immunogenic reaction of EPL/PCL/HA scaffolds in vivo remains unclear. In the present study, three nanoscale scaffolds (EPL/PCL/HA, PCL and PCL/HA) were transplanted into rabbit paraspinal muscle pouches, and T helper type 1 (Th1), T helper type 2 (Th2), T helper type 17 (Th17), and macrophage infiltration were analyzed after 1 week and 2 weeks to detect their immunogenic reaction. Then, the different scaffolds were transplanted into rabbit calvarial bone defect to compare the bone defect repair capacities. The results showed that EPL/PCL/HA composite scaffolds decreased pro-inflammatory Th1, Th17, and type I macrophage infiltration from 1 to 2 weeks, and increased anti-inflammatory Th2 infiltration into the regenerated area at 2 weeks in vivo, when compared to PCL and PCL/HA. In addition, EPL/PCL/HA showed an enhanced bone repair capacity compared to PCL and PCL/HA when transplanted into rabbit calvarial bone defects at both 4 and 8 weeks. Hence, our results suggest that EPL could regulate the immunogenic reaction and promote bone defect repair function of PCL/HA, which is a promising agent for tissue engineering scaffold modulation.

Towards the Enhancement of Essential Oil Components' Antimicrobial Activity Using New Zein Protein-Gated Mesoporous Silica Microdevices

The development of new food preservatives is essential to prevent foodborne outbreaks or food spoilage due to microbial growth, enzymatic activity or oxidation. Furthermore, new compounds that substitute the commonly used synthetic food preservatives are needed to stifle the rising problem of microbial resistance. In this scenario, we report herein, as far as we know, for the first time the use of the zein protein as a gating moiety and its application for the controlled release of essential oil components (EOCs). The design of microdevices consist of mesoporous silica particles loaded with essential oils components (thymol, carvacrol and cinnamaldehyde) and functionalized with the zein (prolamin) protein found in corn as a molecular gate. The zein protein grafted on the synthesized microdevices is degraded by the proteolytic action of bacterial enzymatic secretions with the consequent release of the loaded essential oil components efficiently inhibiting bacterial growth. The results allow us to conclude that the new microdevice presented here loaded with the essential oil component cinnamaldehyde improved the antimicrobial properties of the free compound by decreasing volatility and increasing local concentration.

Optimization of the Production of ε-Poly-L-Lysine by Novel Producer Lactic Acid Bacteria Isolated from Traditional Dairy Products

New strains of lactic acid bacteria (LAB) were isolated from different traditional dairy products. Six new strains named Lactobacillus delbrueckii strain A01, Lactobacillus delbrueckii subsp. bulgaricus strain D01, Lactobacillus delbrueckii subsp. bulgaricus strain E01, Lactococcus lactis strain G01, Lactobacillus delbrueckii strain C01, and Lactobacillus delbrueckii subsp. bulgaricus strain F01 were identified using 16S rDNA sequencing, morphological and biochemical traits. All strains have been registered in the National Center for Biotechnology Information (NCBI) with accession numbers MN611241.1, MN611300.1, MN611301.1, MN611303.1, MN611241.1, and MN611299.1, respectively. Having found ε-Poly-L-Lysine (ε-PL) in all strains isolated, Lactobacillus delbrueckii strain A01 was identified as an active producer of ε-Poly-L-Lysine (ε-PL). The one-factor-at-a-time method and central composite design were applied to optimize ε-Poly-L-Lysine (ε-PL). A predicted 200 ppm of ε-PL was obtained in the medium containing the lowest level of glucose, 25 g/l, and yeast extract, 6 g/l.

Manipulation of Pharmaceutical Polymorphic Transformation Process Using Excipients

BACKGROUND

In the pharmaceutical field, it is vital to ensure a consistent product containing a single solid-state form of the active pharmaceutical ingredient (API) in the drug product. However, some APIs are suffering from the risk of transformation of their target forms during processing, formulation and storage.

METHODS

The purpose of this review is to summarize the relevant category of excipients and demonstrate the availability and importance of using excipients as a key strategy to manipulate pharmaceutical polymorphic transformation.

RESULTS

The excipient effects on solvent-mediated phase transformations, solid-state transitions and amorphous crystallization are significant. Common pharmaceutical excipients including amino acids and derivatives, surfactants, and various polymers and their different manipulation effects were summarized and discussed.

CONCLUSION

Appropriate use of excipients plays a role in manipulating polymorphic transformation process of corresponding APIs, with a promising application of guaranteeing the stability and effectiveness of drug dosage forms.

Encapsulating insoluble antifungal drugs into oleic acid-modified silica mesocomposites with enhanced fungicidal activity

Oleic acid-modified silica mesocomposites as an insoluble antifungal drug cargo matrix with enhanced fungicidal activity.