Understanding the controlled biodegradation of polymers using nanoclays

Biodegradability of Bioplastics in Managed and Unmanaged Environments: A Comprehensive Review

The production and utilization of conventional plastics have raised concerns regarding plastic waste management and environmental safety. In response, the emergence of biodegradable bioplastics presents a possible solution for sustainability. On the other hand, the efficacy of biodegradation is strictly dependent on both the bioplastic type and the conditions in which the biodegradation occurs. This review offers a comprehensive overview of the biodegradation behavior of several bioplastics under a managed (industrialized or controlled) environment, such as industrial composting and anaerobic digestion (at either mesophilic or thermophilic temperature), as well as under less studied unmanaged (natural or open) environments, including soil, seawater, and freshwater. Although the biodegradation trend of some bioplastics is well known, further investigation should be pursued for others in order to clearly have the knowledge and the ability to choose the most viable bioplastic for a specific application and future end-of-life.

Biodegradation study of poly(hydroxybutyrate-co-hydroxyvalerate)/halloysite/oregano essential oil compositions in simulated soil conditions

The aim of this work was to evaluate the influence of halloysite clay nanoparticles - unmodified (Hal) and organically modified (mHal) - and oregano essential oil (OEO), used as an antimicrobial agent in active packaging, on the biodegradation behavior of poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) films. Five samples were prepared by melt mixing using 3 wt% clay, and 8 wt% and 10.4 wt% OEO. PHBV compositions containing OEO presented the highest rate of biodegradation, achieving 46% of mass loss after aging for 12 weeks in simulated soil. The addition of clay nanoparticles reduced the polymer's biodegradation to 32%. The compositions containing OEO showed a rough and layered surface with visible cracks, indicating degradation occurring through layer-by-layer erosion from the surface. This degradation was confirmed by the chemical changes on the surface of all samples, with a slight decrease in molar masses. The composition containing 8 wt% OEO presented an increase in the crystallization degree as a result of the preferential consumption of amorphous phase, whereas for the compositions containing clay nanoparticles, both crystalline and amorphous regions were degraded at similar rates. Therefore, the combination of additives allows the biodegradation process of PHBV to be controlled for use in the production of active packaging.

Biodegradation of Carbon Nanotube/Polymer Nanocomposites using a Monoculture

The biodegradation rates of carbon nanotube (CNT)/ polymer nanocomposites (PNCs) containing poly-ε-caprolactone (PCL) were investigated using Pseudomonas aeruginosa, a microorganism commonly found in the environment. CNT/PCL nanocomposite mass loss profiles revealed that the rate of PCL matrix biodegradation decreased systematically as the CNT loading increased from 0.1 to 10% w/w. Addition of even a low CNT loading (<1% w/w) caused the CNT/PCL biodegradation rate constant to decrease by more than 50%. Similar trends in biodegradation rate were observed for both pristine and oxidized multiwall CNTs embedded in PCL. During PCL matrix biodegradation, CNT accumulation was observed at the surface of CNT/PCL nanocomposites and single particle inductively coupled-mass spectrometry experiments revealed no measurable CNT release to the culture fluid. Experimental data indicated that biodegradation proceeded as a result of biofilm formation on the CNT/PCL nanocomposites and decreased as a function of CNT loading due to the cytotoxicity of CNTs toward P. aeruginosa and the physical barrier presented by the surface-accumulated CNTs to the underlying PCL substrate. As the CNT loading in the CNT/PCL nanocomposites increased, the microbial proliferation of planktonic cells in the surrounding media also decreased as did the biodegradation rate of PCL samples present in the same reactors. Results from this study demonstrate that the inclusion of CNTs into polymer matrices could increase the environmental persistence of polymers in lakes, landfills, and surface waters.

Controlled drug release through regulated biodegradation of poly(lactic acid) using inorganic salts

Biodegradation rate of poly(lactic acid) (PLA) has been regulated, both increase and decrease with respect to the biodegradation of pure PLA, by embedding meager amount of inorganic salts in polymer matrix. Biodegradation is performed in enzyme medium on suspension and film and the extent of biodegradation is measured through spectroscopic technique which is also verified by weight loss measurement. Media pH has been controlled using trace amount of inorganic salt which eventually control the biodegradation of PLA. High performance liquid chromatography confirms the hydrolytic degradation of PLA to its monomer/oligomer. Induced pH by metal salts show maximum degradation at alkaline range (with calcium salt) while inhibition is observed in acidic medium (with iron salt). The pH of media changes the conformation of enzyme which in turn regulate the rate of biodegradation. Thermal degradation and increment of modulus indicate improvement in thermo-mechanical properties of PLA in presence of inorganic salts. Functional stability of enzyme with metal salts corresponding to acidic and alkaline pH has been established through a model to explain the conformational changes of the active sites of enzyme at varying pH influencing the rate of hydrolysis leading to regulated biodegradation of PLA. The tuned biodegradation has been applied for the controlled release of drug from the polymer matrix (both sustained and enhanced cumulative release as compared to pure polymer). The cell proliferation and adhesion are influenced by the acidic and basic nature of polymeric material tuned by two different inorganic salts showing better adhesion and proliferation in calcium based composite and, therefore, suggest biological use of these composites in biomedical applications.

Biodegradable poly(ε-caprolactone) as a controlled drug delivery vehicle of vancomycin for the treatment of MRSA infection

Biodegradable poly(ε-caprolactone) (PCL) is developed as a controlled drug delivery vehicle of vancomycin (VMC) with the advantage of avoiding a second surgery. The PCL-VMC hybrid, prepared through a solution route, is used as a delivery vehicle for vancomycin for controlling MRSA osteomyelitis as well as healing the cavity simultaneously in an experimental study. An in vitro study is conducted to optimize vancomycin impregnation in the PCL-VMC hybrid. An in vitro study on drug release from the hybrid material is investigated in phosphate buffer saline showing steady and sustained release of the drug. The release kinetics is fitted with several models and a non-Fickian nature is established following the Korsmeyer-Peppas model. Spectroscopic techniques and morphology observations reveal the cause of sustained release to be the strong interaction between the drug and the polymer. The results of the antibacterial assay show that the loading of vancomycin into the PCL matrix is able to maintain the activity of the pure drug. For the in vivo study, a unicortical defect is created in the metaphysis of the distal femur in rabbits. After contaminating the defect with MRSA, the 1st group of rabbits were treated with pure polymer, the 2nd group of rabbits were treated with normal saline (PBS), the 3rd group of rabbits were treated with pure VMC and in the last group of rabbits PCL-VMC was placed. Rabbits are assessed by clinical, radiological, histological, gross examination and bacterial load assays. Infection persisted throughout the period of study for both the pure polymer and PBS treated rabbits while rabbits treated with the PCL-VMC hybrid do not show any sign of infection. The VMC treated group rabbits show mild infection for the 1st week of the study; however, the infection becomes gradually more severe with time. Serial histology confirms the formation of new bone without any inflammation and necrosis for the rabbits treated with PCL-VMC. Importantly, the PCL-VMC hybrid bioadsorbs after delivery of the drug and thereby avoids the second surgery to remove the conventional implant.

Controlled biodegradation of polymers using nanoparticles and its application

Controlled biodegradation mechanism has been revealed using different nanoparticles which eventually regulate pH of media.