Effect of bromide and iodide on halogenated by-product formation from different organic precursors during UV/chlorine processes

Degradation of emerging contaminants in synthetic hydrolyzed urine by UV/peracetic acid: Free radical chemistry, and toxicity analysis

The ecological impact of emerging contaminants (ECs) in aquatic environments has raised concerns, particularly with regards to urine as a significant source of such contaminants in wastewater. The current investigation used the UV/Peracetic Acid (UV/PAA) processes, an innovative advanced oxidation technology, to effectively separate two emerging pollutants from urine at its source, namely, ciprofloxacin (CIP) and bisphenol A(BPA). The research findings demonstrate that the presence of the majority of characteristic ions has minimal impact on the degradation of ECs. However, in synthetic hydrolyzed urine, only NH4+ inhibits the degradation of two types of ECs, with a more pronounced effect observed on CIP degradation compared to BPA.The impact of halogen ions, specifically Cl- and I-, on the degradation of CIP in synthetic hydrolyzed urine was a complex phenomenon. When these two halogen ions are present individually, the generation of reactive halogen species (RHS) within the system enhances the degradation of CIP. However, when both types of ions coexist, the formation of diatomic radical species partially inhibits degradation. In terms of BPA degradation, while the production of reactive chlorine species (RCS) to some extent hinders the reaction rate, the generation of reactive iodine species (RIS) promotes the overall process. CIP undergoes fragmentation of the piperazine and quinoline rings, decarboxylation, defluorination reactions, as well as substitution reactions, leading to the formation of products with simplified structures. The degradation of BPA occurs gradually through hydroxyl and halogen substitution as well as isopropyl cleavage. The preliminary toxicity analysis confirmed that the presence of halogen ions in urine resulted in the formation of halogenated products in two types of ECs, albeit with an overall reduction in toxicity. The UV/PAA processes was considered to be an effective and relatively safe approach for the separation of ECs in urine.

The diverse roles of halide ions in the degradation of bisphenol A via UV/peracetic acid process at different pH values: Radical chemistry, and transformation pathways

UV/Peracetic Acid (UV/PAA), as an innovative advanced oxidation process (AOP), is employed to treat bisphenol A (BPA) in water through the generation of hydroxyl radicals (•OH) and carbon-centered radicals (R-C•). The impact of halide ions (Cl-; Br-; I-) on the efficiency of UV/PAA was investigated for the first time under varying pH levels. The presence of halide ions exerted an influence on the reactivity of •OH and R-C•, exhibiting varying degrees of impact across different pH conditions. It was discovered that pH exerts a significant influence on its efficiency, with optimal removal performance observed at a pH 9. The degradation of BPA was inhibited by Cl- through the generation of reactive chlorine species (RCS), which triggers the interconversion between •OH and R-C•. Reactive bromine species (RBS) were produced in the presence of Br-, facilitating BPA degradation and generating HOBr as a supplementary source of •OH radicals. I- primarily generate reactive iodine species (RIS) through photolysis, which facilitates the degradation of BPA. The transformation of BPA involves hydroxylation, demethylation, halogenation, and cleavage reactions to form various products and pathways. The toxicity test demonstrates that the UV/PAA treatment of BPA exhibits lower toxicity, thereby indicating its environmentally friendly.

Formation of halonitromethanes from benzylamine during UV/chlorination: Impact factors, toxicity alteration, and pathways

Halonitromethanes (HNMs), a representative nitrogen-containing disinfection byproduct, have gained significant concerns due to their higher cytotoxicity and genotoxicity. UV/chlorination is considered a promising alternative disinfection technology for chlorination. This study aimed to investigate the HNMs formation from benzylamine (BZA) during UV/chlorination. The experimental results revealed that the yields of HNMs initially raised to a peak then dropped over time. Higher chlorine dosage and BZA concentration promoted the formation of HNMs, whereas alkaline pH inhibited their formation. The presence of bromine ion (Br-) not only converted chlorinated-HNMs (Cl-HNMs) to brominated (chlorinated)-HNMs Br (Cl)-HNMs) and brominated-HNMs (Br-HNMs) but also enhanced the total concentration of HNMs. Besides, the calculated cytotoxicity index (CTI) and genotoxicity index (GTI) of HNMs were elevated by 68.97% and 60.66% as Br- concentration raised from 2 to 6 µM. The possible formation pathways of HNMs from BZA were proposed based on the intermediates identified by a gas chromatography/mass spectrometry (GC/MS). In addition, the formation rules of HNMs in actual water verified the results in deionized water during UV/chlorination. The results of this study provide basic data and a theoretical basis for the formation and control of HNMs, which is conducive to applying UV/chlorination.

Bromide induced the formation of brominated halonitromethanes from aspartic acid in the UV/chlorine disinfection process

Brominated halonitromethanes (Br-HNMs) are generated in water disinfection processes and present high toxicity to human health. This work used aspartic acid (ASP) as the precursor to reveal that bromide (Br-) induced the production of Br-HNMs in the UV/chlorine disinfection process. Consequently, six Br-HNMs were identified, and their yields presented an increasing and then declining evolution over the reaction time from 0 to 15 min. Also, the total Br-HNMs yield reached the maximum of 251.1 μg L-1 at 5 min and then declined to 107.1 μg L-1. The total Br-HNMs yield increased from 2.40 to 251.14 μg L-1 with the increase of Cl2:Br- ratios from 0.25 to 3.0 by increasing free chlorine dosage with a fixed Br- concentration, and it increased from 207.59 to 251.14 μg L-1 and then decreased to 93.44 μg L-1 with the increase of Cl2:Br- ratio from 1.0 to 3.6 by increasing Br- concentration with a fixed free chlorine dosage. Besides, the total Br-HNMs yield reached the highest value (251.14 μg L-1) at pH 7.0 and the lowest value (74.20 μg L-1) at pH 8.0. Subsequently, the possible reaction mechanism of Br-HNMs generated from ASP was deduced, and the changes in toxicity of Br-HNMs also followed an increasing and then declining trend, closely relating to Br-HNMs yields and Br- utilization. This work explored and illustrated the yields, influence factors, reaction mechanisms, and toxicity of Br-HNMs formed from Br- containing ASP water during UV/chlorine disinfection, which might help to control Br-HNMs formation.

Sonochemistry dosimetries in seawater

Due to the complex physical and chemical interactions taking place in the sonicated medium, various methods have been proposed in the literature for a better understanding of the sonochemical system. In the present paper, the performance of calorimetry, iodometry, Fricke, 4-nitrophenol, H2O2, and ascorbic acid dosimetry techniques have been evaluated over the electric power range from 20 to 80 W (f = 300 kHz). These methods have been analyzed for distilled and seawater in light of the literature findings. It has been found that the lowest temperatures and calorimetric energies were obtained for seawater in comparison to distilled water. However, the discrepancy between both mediums disappears with the increase in the electric power up to 80 W. Compared to the calorimetry results, a similar trend was obtained for the KI dosimetry, where the discrepancy between both solutions (seawater and distilled water) increased with the reduction in the electric power down to 20 W. In contrast, over the whole range of the electric power (20-80 W), the H2O2 dosimetry was drastically influenced by the salt composition of seawater, where, I3- formation was clearly reduced in comparison to the case of the distilled water. On the other hand, a fluctuated behavior was observed for the Fricke and 4-nitrophenol dosimetry methods, especially at the low electric powers (20 and 40 W). It has been found that dosimetry techniques based on ascorbic acid or potassium iodide are the best means for accurate quantification of the sonochemical activity in the irradiated liquid. As a result, it has been concluded, in terms of the dosimetry process's performance, that the dosimetry methods are in the following order: Ascorbic acid ≈ KI > Fricke > 4-nitrophenol > H2O2.

Characterization of halogenated organic compounds by the Fourier transform ion cyclotron resonance mass spectrometry: A critical review

Halogenated organic compounds (HOCs), widely present in various environments, are generally formed by natural processes (e.g., photochemical halogenation) and anthropogenic activities (e.g., water disinfection and anthropogenic discharge of HOCs), posing health and environmental risks. Therefore, in-depth knowledge of the molecular composition, transformation, and fate of HOCs is crucial to regulate and reduce their formation. Because of the extremely complex nature of HOCs and their precursors, the molecular composition of HOCs remains largely unknown. The Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) offers the most powerful resolution and mass accuracy for the simultaneous molecular-level characterization of HOCs and their precursors. However, there is still a paucity of reviews regarding the comprehensive characterization of HOCs by FT-ICR MS. Based on the FT-ICR MS, the formation mechanism, sample pretreatment, and analysis methods were summarized for two typical HOCs classes, namely halogenated disinfection byproducts and per- and polyfluoroalkyl substances in this review. Moreover, we have highlighted data analysis methods and some typical applications of HOCs using FT-ICR MS and proposed suggestions for current issues. This review will deepen our understanding of the chemical characterization of HOCs and their formation mechanisms and transformation at the molecular level in aquatic systems, facilitating the application of the state-of-the-art FT-ICR MS in environmental and geochemical research.

Disinfection By-Products Formation from Chlor(am)ination of Algal Organic Matter of Chlorella sorokiniana

Eutrophication in water reservoirs releases algal organic matter (AOM), which is an important precursor of disinfection by-products (DBPs) formed during water treatment. Chlorella sorokiniana is a microalgae which flourishes under conditions of high light intensity and temperature, thus its prevalence in algal blooms is expected to increase with climate change. However, Chlorella sorokiniana AOM has not been previously investigated as a DBP precursor. In this context, this study evaluated the effect of AOM concentration, humic acid (HA), and pH on DBP formation from chlor(am)ination of AOM Chlorella sorokiniana. DBP yields determined by linear regression for trichloromethane (TCM) and chloral hydrate (CH) were 57.9 and 46.0 µg·mg DOC-1 in chlorination, while the TCM, CH, dichloroacetonitrile (DCAN), 1,1,1-trichloropropanone (1,1,1-TCP), and chloropicrin (CPN) concentrations were 33.6, 29.8, 16.7, 2.1, and 1.2 µg·mg DOC-1 in chloramination. Chloramination reduced the formation of TCM and CH but increased CPN, DCAN, and 1,1,1-TCP yields. AOM Chlorella sorokiniana showed a higher DBP formation than 9 of 11 algae species previously investigated in the literature. At basic pH, the concentration of TCM increased while the concentration of other DBP classes decreased. Bromide was effectively incorporated into the AOM structure and high values of bromine incorporation factor were found for THM (1.81-1.89) and HAN (1.32) at 1.5 mg Br·L-1. Empirical models predicted successfully the formation of THM and HAN (R2 > 0.86). The bromide concentration had more impact in the model on the DBP formation than AOM and HA. These results provide the first insights into the DBP formation from AOM chlor(am)ination of Chlorella sorokiniana.

Formation, toxicity, and mechanisms of halonitromethanes from poly(diallyl dimethyl ammonium chloride) during UV/monochloramine disinfection in the absence and presence of bromide ion

Bromide ion (Br^-) is known as a prevalent component in water environments, which exhibits significant impacts on halonitromethanes (HNMs) formation. This study was performed to explore and compare the formation, toxicity, and mechanisms of HNMs from poly(diallyl dimethyl ammonium chloride) (PDDACl) in the absence and presence of Br^- in the UV/monochloramine (UV/NH₂Cl) disinfection process. The results showed that chlorinated HNMs were found in the absence of Br^-, while brominated (chlorinated) HNMs and brominated HNMs were found in the presence of Br^-. Furthermore, the peaks of total HNMs were promoted by 2.0 and 2.4 times, respectively when 1.0 and 2.0 mg L^-1 Br^- were added. Also, the peaks of total HNMs were enhanced with the increase of the NH₂Cl dosage, which were reduced with the increase of pH. It should be noted that Br^- induced higher toxicity of HNMs, and the cytotoxicity and genotoxicity of HNMs with the addition of 2.0 mg L^-1 Br^- were 78.0 and 3.7 times those without the addition of Br^-, respectively. Meanwhile, both the reaction mechanisms of HNMs produced from PDDACl were speculated in the absence and presence of Br^-. Finally, different HNMs species and yields were discovered in these two real water samples compared to those in simulated waters. These findings of this work will be conducive to understanding the significance of Br^- affecting HNMs formation and toxicity in the disinfection process.

Chlorination disinfection by-products in Southeast Asia: A review on potential precursor, formation, toxicity assessment, and removal technologies

This review discusses disinfection by-products' (DBPs) potential precursors, formation, and toxicity, alongside available research on the treatment of DBPs in Southeast Asian countries' water sources. Although natural organic matter (NOM) in the form of humic and fulvic acids is the major precursor of DBPs formation, the presence of anthropogenic organic matter (AOM) also plays essential roles during disinfection using chlorine. NOM has been observed in water sources in Southeast Asian countries, with a relatively high concentration in peat-influenced water sources and a relatively low concentration in non-peat-influenced water sources. Similarly, AOMs, such as microplastics, pharmaceuticals, pesticides, and endocrine-disrupting chemicals (EDCs), have also been detected in water sources in Southeast Asian countries. Although studies regarding DBPs in Southeast Asian countries are available, they focus on regulated DBPs. Here, the formation potential of unregulated DBPs is also discussed. In addition, the toxicity associated with extreme DBPs' formation potential, as well as the effectiveness of treatments such as conventional coagulation, filtration, adsorption, and ozonation in reducing DBPs' formation potential in Southeast Asian sources of water, is also analyzed.

Degradation of odorous 2,4,6-trichloroanisole in chlorinated water by UV-LED/chlorination: kinetics and influence factors

2,4,6-Trichloroanisole (2,4,6-TCA) has aroused a special concern for their odor problem and potential threats. In this study, the degradation of 2,4,6-TCA by UV/chlorination with different UV sources was compared, including low-pressure mercury lamp (LPUV, 254 nm) and ultraviolet light-emitting diode (UV-LED, 275 and 285 nm). The maximum removal of 2,4,6-TCA can be achieved by 275-nm UV-LED/chlorination in neutral and alkaline conditions which was 80.0%. The reaction, kinetics, and water matrix parameters on 2,4,6-TCA degradation were also evaluated. During UV-LED (275 nm)/chlorination, 2,4,6-TCA degradation was mainly caused by direct UV photolysis and indirect hydroxyl radical (HO·) oxidation, while reactive chlorine radicals (RCSs) had a negligible contribution. The second-order rate constant between HO· and 2,4,6-TCA was determined as 3.1 × 10⁹ M^-1 s^-1. Increasing initial chlorine dosage and decreasing 2,4,6-TCA concentration or pH value significantly promoted 2,4,6-TCA degradation during UV/chlorination process. The presence of natural organic matter (NOM) and bicarbonate (HCO₃^-) can inhibit 2,4,6-TCA degradation, while chloride ion (Cl^-) had a negligible effect. The kinetic model for 2,4,6-TCA degradation was established and validated, and the degradation pathways were proposed based on the identified intermediates. Furthermore, UV-LED (275 nm)/chlorination also exhibited a promising effect on 2,4,6-TCA removal in real water, which can be used to control 2,4,6-TCA pollution and odor problems.

Formation of halogenated macromolecular organics induced by Br- and I- during plasma oxidation/chlorination of DOM: Highlighting competitive mechanisms

Understanding the effects of halogens on the production of macromolecular disinfection byproducts (DBPs) is critical for drinking water safety. The effects of Br^- and I^- on the chemical diversity of dissolved organic matter (DOM) during plasma preoxidation and the subsequent formation of macromolecular halogenated DBPs after chlorination were deciphered. Plasma preoxidation changed DOM diversity from aromatic component-oriented to lignin and tannin component-oriented, resulting in 62.0% and 21.2% decreases in N-DBPs (C_kH_nO_mN_zCl_x formulas) and C-DBPs (C_kH_nO_mCl_x formulas) after chlorination, respectively. Br^- could induce the formation of organobromine compounds (OBrCs) during plasma oxidation; however, the intensities of OBrCs decreased by 56.3% (CHO formulas) and 75.2% (CHON formulas) after further chlorination. OBrCs still accounted for 79.8% of the total organohalogen compounds (OXCs, X=Cl or Br) due to the higher substitutability of bromine. I^-promoted OIC production in the DOM preoxidation process, and OICs acted as intermediates to form OClCs during chlorination. When Br^-and I^-coexisted, Br^- promoted OIC production in the DOM preoxidation process; therefore, more OBrCs and OClCs were generated due to intermediates of OICs in subsequent chlorination. Connections between OXCs and their precursors were established using network computation. The precursors of OClCs were located in the aromatic structure region (0.2 < H/C ≤ 0.7; O/C ≤ 0.67); those of OBrCs and OICs were located in the lignin (0.7 < H/C ≤ 1.5; 0.1 < O/C < 0.67) and tannin (0.6 ≤ H/C ≤ 1.5, 0.67 < O/C < 1.0) regions with relatively greater H/C and O/C ratios, respectively.

Degradation of organics and formation of DBPs in the combined LED-UV and chlorine processes: Effects of water matrix and fluorescence analysis

Combined processes of light-emitting diodes ultraviolet (LED UV) and chlorination (Cl₂) are alternative disinfection technologies in drinking water, while the formation of disinfection by-products (DBPs) needs to be evaluated. This study investigated the impacts of critical water matrix factors on the DBP formation in the combined processes. Moreover, the correlation between the degraded natural organic matter (NOM) and the formed DBP was studied. Simultaneous UV/Cl₂ outperformed single Cl₂ and sequential combined processes in degrading humic acids (HA) and resulted in the highest DBP yield. Iodide at 5-20 μg/L and bromide at 0.05-0.2 mg/L slightly affected the degradation of organics, while increased the formation of brominated DBPs up to 36.6 μg/L. pH 6 was regarded as the optimum pH, achieving high efficiency of HA degradation and a lower level of total DBP formation than pH 7 and 8 by 11 % and 24 %, respectively. Compared to HA samples (46.8-103.9 μg/L per mg/L DOC), NOM in canal water were less aromatic and yielded fewer DBPs (19.6 and 21.2 μg/L per mg/L DOC). However, the extremely high bromide in site 1 samples (18.6 mg/L) shifted the chlorinated DBPs to their brominated analogues, posting around 1 order of magnitude higher levels of toxicities than HA samples. The reduction of absorbance at 254 nm (UV₂₅₄) correlated with all DBP categories in HA samples, while the correlation coefficients were compromised when included in the canal samples. For the first time, this study found that parallel factor analysis (PARAFAC) would neglect the fluorescence change caused by iodide/bromide in UV/Cl₂, while the changes could be captured by self-organising map (SOM) trained with full fluorescence spectra. Fluorescence Ex/Em pairs were proposed to predict DBP formation, suggesting a potential method to develop an online monitoring system for DBPs.

Effects of bromide ion on the formation and toxicity alteration of halonitromethanes from nitrate containing humic acid water during UV/chlor(am)ine disinfection

UV/chlor(am)ine are efficient for achieving multiple-barrier disinfection and maintaining residuals, while bromide (Br^-) has notable impacts on the formation and toxicity of halonitromethanes (HNMs) during UV/chlor(am)ine disinfection. This study investigated the effects of Br^- on HNMs formation and toxicity alteration during UV/chlor(am)ine disinfection of nitrate containing humic acid (HA) water. Results reveal that the maximum concentration of HNMs during UV/chlorine disinfection was 12.03 μg L^-1 with 0.2 mg L^-1 Br^-, which was 22.5% higher than that without Br^-, and the predominant species of HNMs were converted from trichloronitromethane (TCNM) to dibromonitromethane (DBNM) and tribromonitromethane (TBNM). However, the maximum concentration of HNMs during UV/chloramine disinfection was 3.69 μg L^-1 with 0.2 mg L^-1 Br^-, which was increased by 26.0% than that without Br^-, and the predominant species of HNMs were converted from dichloronitromethane (DCNM) to bromochloronitromethane (BCNM) and DBNM. Notably, the HNMs species and yields during UV/chloramine disinfection were less than those during UV/chlorine disinfection, primarily due to the higher concentrations of HO· and reactive chlorine/bromine species in UV/chlorine. Also, in the ranges of the Br^-:Cl₂ molar ratio from 0 to 0.32 and pH from 6.0 to 8.0, the Br^-:Cl₂ molar ratio of 0.16 and acidic pH contributed to the HNMs formation during UV/chlorine disinfection, and a high Br^-:Cl₂ molar ratio and neutral pH contributed to the HNMs formation during UV/chloramine disinfection. Note that the incorporation of Br^- significantly improved the calculated cytotoxicity (CTI) and genotoxicity (GTI) of HNMs formed, and the calculated CTI and GTI of HNMs formed during UV/chloramine disinfection were 28.19 and 48.90% of those during UV/chlorine disinfection. Based on the diversity of nitrogen sources, the possible formation pathways of HNMs from nitrate containing HA water were proposed during UV/chlor(am)ine disinfection in the presence of Br^-. Results of this study indicated that UV/chloramine can reduce the formation and toxicity of HNMs efficiently.

Mechanistic insights into the generation and control of Cl-DBPs during wastewater sludge chlorination disinfection process

Chlorination disinfection has been widely used to kill the pathogenic microorganisms in wastewater sludge during the special Covid-19 period, but sludge chlorination might cause the generation of harmful disinfection byproducts (DBPs). In this work, the transformation of extracellular polymeric substance (EPS) and mechanisms of Cl-DBPs generation during sludge disinfection by sodium hypochlorite (NaClO) were investigated using multispectral analysis in combination with Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). The microorganism Escherichia coli (E. coli) was effectively inactivated by active chlorine generated from NaClO. However, a high diversity of Cl-DBPs were produced with the addition of NaClO into sludge, causing the increase of acute toxicity on Q67 luminous bacteria of chlorinated EPS. A variety of N-containing molecular formulas were produced after chlorination, but N-containing DBPs were not detected, which might be the indicative of the dissociation of -NH₂ groups after Cl-DBPs generated. Additionally, the release of N-containing compounds was increased in alkaline environment caused by NaClO addition, resulted in more Cl-DBPs generation via nucleophilic substitutions. Whereas, less N-compounds and Cl-DBPs were detected after EPS chlorination under acidic environment, leading to lower cell cytotoxicity. Therefore, N-containing compounds of lignin derivatives in sludge were the major Cl-DBPs precursors, and acidic environment could control the release of N-compounds by eliminating the dissociation of functional groups in lignin derivatives, consequently reducing the generation and cytotoxicity of Cl-DBPs. This study highlights the importance to control the alkalinity of sludge to reduce Cl-DBPs generation prior to chlorination disinfection process, and ensure the safety of subsequential disposal for wastewater sludge.

Treatment of synthetic dye containing textile raw wastewater effluent using UV/Chlorine/Br photolysis process followed by activated carbon adsorption

This study investigated the efficiency and feasibility of ultraviolet (UV)-assisted photolysis of synthetic dye containing textile raw wastewater effluent. For a said purpose, in-house developed UV/Chlorine/Br process was followed in the presence of activated carbon (AC) which additionally facilitate the dye adsorption. In UV/Chlorine process Cl^•, Cl₂^•-, and HO^• are generated in the solution and destroyed compounds that cannot be oxidized by the conventional oxidant. In this process, free bromine is formed and photolyzed by UV radiation and generate Br^• and Br₂^•- that can enhance the rate of pollutant degradation. In the present study, the dye removal efficiency was contributed by dark bromide (7.18%), UV irradiation (26.8%), dark chlorination (78.67%), and UV/Chlorine/Br (87.01%), respectively. With increasing pH from 3.0 to 8.30, the dye removal efficiency was enhanced but decreased by further increasing pH values. In addition, magnetized activated carbon from pomegranate husk using dual-stage chemical activation was used for post-adsorption of the residual dye and its degradation byproducts. The adsorption of the dye residues by AC followed the second-order kinetics with the rate constant of 1.7 × 10^-3. The phytotoxicity of the treated textile wastewater by UV irradiation, dark chlorination, and UV/Chlorine/Br was assessed by seed germination of Lepidium sativum seeds. The highest inhibition effect on seed germination was related to treated wastewater by UV irradiation (more than 90% inhibition) that alleviated to less than 10% when this effluent diluted to 5% v/v. The highest germination was observed when the seeds were irrigated by the effluent of the UV/Chlorine/Br process. The significant reduction in the toxicity of the treated wastewater revealed that the UV/Chlorine/Br process has a considerable potential to effectively detoxify textile wastewater. Graphical abstract.

Effects of MPUV/chlorine oxidation and coexisting bromide, ammonia, and nitrate on DBP formation potential of five typical amino acids

Disinfection byproduct (DBP) formation is a potential concern with regard to MPUV/Cl₂ application in water treatment. In this study, five typical amino acids (AAs) were selected to investigate their DBP alteration during short-term medium pressure (MP) UV/chlorine oxidation following post-chlorination relative to parallel dark controls. The five selected AAs include two potent DBP precursors (aspartic acid and tryptophan), one modest precursor (asparagine) and two poor precursors (phenylalanine and proline). MPUV/chlorine increased the total DBP formation and DBP-associated cytotoxicity of the two poor precursors phenylalanine (Phe) and proline (Pro) as well as their chlorine demands. Conversely, DBP formation and DBP-associated cytotoxicity of the three modest-to-potent DBP precursors showed the opposite changing trends due to MPUV/Cl₂ oxidation. The two aromatic AAs (tryptophan and phenylalanine) were more readily to be affected by MPUV/Cl₂ oxidation especially at acidic pH condition. Conversely, DBP formation and DBP-associated cytotoxicity of the three modest-to-potent precursors showed the opposite changing trends due to MPUV/Cl₂ oxidation. Among the measured DBPs, the absolute formation potential changes of haloacetic acids and haloacetonitriles were the most prominent. Presence of bromide increased the trihalomethane formation potential of five AAs. Ammonia-spiked samples resulted in notably higher chlorine demands but slightly reduced DBPFP. Photonitration caused increased haloacetonitrile and trichloronitromethane formation but lower overall DBP formation potential and DBP-associated cytotoxicity. Results indicated that increased DBP formation of unreactive aromatic AAs may be problematic with respect to MPUV/Cl₂ application, while the presence of inorganic ions may not contribute to further increase in calculated cytotoxicity of measured DBPs.

Enhanced formation of iodinated trihalomethanes in a mixed chlorine/chloramine system and attenuation by UV-activated process

Iodinated trihalomethanes (I-THMs) have drawn increasing concerns due to their higher toxicity than those of their chlorinated and brominated analogues. In this study, I-THM formation was firstly evaluated for three treatment scenarios - (i) chlorine alone, (ii) chloramine alone, and (iii) mixed chlorine/chloramine - in the presence and absence of UV irradiation for the iodide-containing humic acid solution or natural water. The results indicated that I-THM formation decreased in the order of mixed chlorination/chloramination > chloramination > > chlorination, which fitted the trend of toxicity evaluation results using Chinese hamster ovary cells. Conversely, total organic halide concentration decreased in the order of chlorination > > chloramination ≈ mixed chlorination/chloramination. Besides, I-THM formation can be efficiently controlled in a UV-activated mixed chlorine/chloramine system. Influencing factors including pH values and Br^-/I^- molar ratios were also systematically investigated in a mixed chlorine/chloramine system. Enhanced I-THM formation was observed with increasing pH values (6.0-8.0) and Br^-/I^- molar ratios (1: 1-10: 1). The results obtained in this study can provide new insights into the increasing risk of I-THM formation in a mixed chlorine/chloramine system and the effective control of I-THMs in the iodide-containing water using UV irradiation.

Effect of bromide on molecular transformation of dissolved effluent organic matter during ozonation, UV/H2O2, UV/persulfate, and UV/chlorine treatments

Ozonation and ultraviolet-based advanced oxidation processes (UV-AOPs) play important roles in advanced treatment of municipal wastewater for water reuse. Bromide is widely present in wastewater at different concentration levels (ranging from μg/L to mg/L). However, the effect of bromide on molecular transformation of dissolved effluent organic matter (dEfOM) in real wastewater during ozonation and UV-AOPs treatments still remains unclear. Herein, Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) was utilized to characterize the overall molecular transformation of dEfOM and the formation of unknown halogenated byproducts (X-BPs) in ozonation, UV/H₂O₂, UV/persulfate (UV/PS), and UV/chlorine (UV/Cl) processes in the presence of additional bromide. Compared with the same oxidation processes without additional bromide, the degree of dEfOM oxygenation had some extent decrement with the effect of bromide. A slightly increment of the number of unknown brominated byproducts (Br-BPs) was observed during ozonation, UV/H₂O₂, and UV/PS treatments in the presence of additional bromide, and the largest increment of these compounds was found in UV/Cl process. A total of 82 chlorinated byproducts (Cl-BPs) and 183 Br-BPs were detected in all oxidation processes with the effect of bromide, and the number of Br-BPs was significantly higher than that of Cl-BPs. Based on mass difference analysis, 69 pairs of possible precursors/Br-BPs were identified. In addition, the additional bromide did not remarkably increase the concentrations of trihalomethanes (THMs) and haloacetic acids (HAAs) in ozonation, UV/H₂O₂, and UV/PS treatments, while the production of THMs and HAAs significantly decreased by 68.06% and 54.55%, respectively, during UV/Cl treatment. The calculated cytotoxicity increased to some extent for each treatment, especially for UV/Cl treatment, and the compound with largest contribution to cytotoxicity was monobromoacetic acid. This study provides new insights into the formation and transformation of X-BPs during advanced treatment of real wastewater with the effect of bromide.

Transformation of bromide and formation of brominated disinfection byproducts in peracetic acid oxidation of phenol

Peracetic acid (PAA) has attracted increasing attention in wastewater treatment as a disinfectant. However, the transformation of bromide (Br^-) during PAA oxidation of bromide-containing wastewater has not been fully explored. This study showed that Br^- could be oxidized by PAA to free bromine which reacted with phenol to form organic bromine. At pH 7.0, more than 35.2% inorganic Br^- was converted to organic bromines in 4 h. At acidic conditions, the conversion ratio was even higher, reaching 69.9% at pH 2.8. Most of the organic bromines were presented as bromophenols (i.e., 2-bromophenol, 4-bromophenol, and 2,4-dibromophenol), while regulated brominated disinfection byproducts (Br-DBPs, i.e., bromoform and bromoacetic acids) only accounted for a tiny fraction of total organic bromine. Similar results were observed when PAA was applied to natural organic matter (NOM) or wastewater in presence of Br^-. The organic bromine yield reached 56.6 μM in the solution containing 0.1 mM Br^- and 2 mg/L NOM initially. Among them, only 1.00 μM bromoform and 0.16 μM dibromoacetic acid were found. Similarly, regulated Br-DBPs only accounted for 28.3% of the organic bromine in a real wastewater effluent treated with PAA. All these data show that monitoring regulated DBPs cannot fully indicate the potential environmental risk of the application of PAA to wastewater.

Formation and transformation of halonitromethanes from dimethylamine in the presence of bromide during the UV/chlorine disinfection

Halonitromethanes (HNMs) is a typical class of nitrogenous disinfection byproducts with high toxicity. The effect of Br^- on the formation and transformation of HNMs from dimethylamine (DMA) during the ultraviolet (UV)/chlorine disinfection has been investigated in current study. Results reveal that only chloronitromethane, dichloronitromethane and trichloronitromethane (TCNM) could be found during the UV/chlorine disinfection. Whereas in the presence of Br^-, nine species of HNMs could be observed simultaneously. When Br^- concentration increased from 0 to 15.0 mg L^-1, the predominant species of HNMs were gradually changed from TCNM to dibromonitromethane and tribromonitromethane, which contributed to 23.37% and 31.07% of total HNMs concentration at 15 mg L^-1 Br^-, respectively. The presence of Br^- not only shifted the chlorinated-HNMs (Cl-HNMs) towards brominated-HNMs (Br-HNMs) but also affected the dominant species and total concentration of HNMs. When Br^- concentration was 4.0 mg L^-1, the formation of HNMs decreased with the increase of pH from 6.0 to 8.0 and increased with the increase of free chlorine and DMA. When free chlorine concentration rose from 0.25 to 1.1 mmol L^-1, Br-HNMs were shifted to Br(Cl)-HNMs and then to Cl-HNMs. According to the findings, possible formation and transformation pathways of HNMs from DMA were proposed in the presence of Br^- during the UV/chlorine disinfection. Finally, it was proved that the effect of Br^- on the trend of HNMs in real water was similar to that in deionized water, but higher HNMs concentrations and delayed peak time were observed in real water. This study can provide the scientific evidence and fundamental data for the applications of UV/chlorine disinfection in the treatment of water containing Br^-.

The fate and transformation of iodine species in UV irradiation and UV-based advanced oxidation processes

Iodinated disinfection byproducts (I-DBPs) formed in water treatment are of emerging concern due to their high toxicity and the tase-and-odor problems associated with iodinated trihalomethanes (I-THMs). Iodoacetic acid and dichloroiodomethane are currently regulated in Shenzhen, China and the Ministry of Health of the People's Republic of China has also been considering regulating I-DBPs. Iodide (I^-), organoiodine compounds (e.g., iodinated X-ray contrast media [ICM]), and iodate (IO₃^-) are the three common iodine sources in aquatic environment that lead to I-DBP formation. While UV irradiation effectively inactivate a wide range of microorganisms in water, it induces the transformation of these iodine sources, enabling the formation of I-DBPs. This review focuses on the fate and transformation of these iodine sources in UV-based water treatment (i.e., UV irradiation and UV-based advanced oxidation processes [UV-AOPs]) and the formation of I-DBPs in post-disinfection. I^- released in UV-based treatments of ICM and can be oxidized in subsequent disinfection to hypoiodous acid (HOI), which reacts with natural organic matter (NOM) to produce I-DBPs. Both UV and UV-AOPs are not able to fully mineralize ICM and completely oxidize the released I^- to (except UV/O₃). Results reveal that UV and UV-AOPs are adequate for I-DBP degradation but require high UV doses. While the ideal I-DBP mitigation strategy awaits to be developed, understanding their sources and formation pathways aids in informed selections of water treatment processes, empowers water suppliers to meet drinking water standards, and minimizes consumers' exposure to I-DBPs.

Iodide promotes bisphenol A (BPA) halogenation during chlorination: Evidence from 30 X-BPAs (X = Cl, Br, and I)

As a well known endocrine-disrupting and model chemical, bisphenol A (BPA) may pose a serious threat to human health, since it and its disinfection by-products (DBPs) have been detected in drinking water, urine, human colostrum, adipose tissue, and placenta samples. Although chlorinated BPAs (Cl-BPAs) and iodinated BPAs (I-BPAs) have been well studied, brominated BPAs (Br-BPAs), and mixed halogenated DBPs like bromo-iodo-BPAs (Br-I-BPAs), and bromo-chloro-iodo-BPAs (Cl-Br-I-BPAs) are less well understood. Notably, the role of iodide (I^-) during chlorination is not well understood, since the studies of the I-DBPs mainly focus on their genotoxicity and cytotoxicity. To understand the formation mechanisms of halogenated bisphenol A (HBPs) during chlorination with bromide (Br^-) and/or I^-, and the role of I^- during chlorination, three set of reactions were performed in the laboratory ("BPA + chlorine + Br^-", "BPA + chlorine + I^-" and "BPA + chlorine + Br^- +I^-" assigned as group A, B and C respectively). Thirty HBPs were identified and 18 of them were never reported before. I^- increases the transformation rate of BPA into HBPs as I-BPAs act as intermediate HBPs during chlorination that easily react with HClO/ClO^- and HBrO/BrO^- to form Cl-BPAs and Br-BPAs. HIO/IO^- showed higher reactivity towards BPA and HBPs than that of HBrO/BrO^- and HClO/ClO^-. The recycling of I^- was observed in the reactions of "BPA + chlorine + I^-" and "BPA + chlorine + Br^- +I^-", which may explain why I^- can induce BPA to transform into HBPs and suggests that I^- may act as a catalyst during the BPA chlorination reactions. The reaction pathways are proposed which present the reactions of BPA and HBPs with HClO/ClO^-, HBrO/BrO^-, and HIO/IO^-, as well as the recycling of I^-. This study describes the potential DBP formation and transformation mechanisms of BPA and its 16 alternatives, as well as the role of I^- on the transformation of phenol compounds during chlorination.

DBP formation and toxicity alteration during UV/chlorine treatment of wastewater and the effects of ammonia and bromide

The UV/chlorine process is efficient for the abatement of micropollutants; yet, the formation of disinfection by-products (DBPs) and the toxicity can be altered during the treatment. This study investigated effluent organic matter characterization, DBP formation and toxicity alteration after the UV/chlorine treatment of wastewater; particularly, typical water matrix components in wastewater, namely, ammonia and bromide, were studied. The raw wastewater contained low levels of ammonia (3 µM) and bromide (0.5 µM). The UV/chlorine treatment efficiently eliminated 90 - 94% of fluorescent components. Compared with chlorination alone, a 20 min UV/chlorine treatment increased the formation of trihalomethanes (THMs), haloacetic acids (HAAs), chloral hydrate (CH), haloacetonitriles (HANs), trichloronitromethane (TCNM) and haloacetamides (HAcAms) by 90 - 508%. In post-chlorination after the UV/chlorine treatment, the formation of CH, HANs, TCNM and HAcAms increased by 77 - 274%, whereas the formation of both THMs and HAAs increased slightly by 11%. Meanwhile, the calculated cytotoxicity and genotoxicity of DBPs increased considerably after the UV/chlorine treatment and in post-chlorination, primarily due to the increased formation of HAAs and nitrogenous DBPs (N-DBPs). However, the acute toxicity of the wastewater to Vibrio fischeri and genotoxicity determined by the umu test decreased by 19% and 76%, respectively, after the 20 min UV/chlorine treatment. An additional 200 µM ammonia decreased the formation of all detected DBPs during the UV/chlorine treatment and 24 h post-chlorination, except that TCNM formation increased by 11% during post-chlorination. The acute toxicity of wastewater spiked with 200 µM ammonia was 32% lower than that of raw wastewater after the UV/chlorine treatment, but the genotoxicity was 58% higher. The addition of 1 mg/L bromide to the UV/chlorine process dramatically increased the formation of brominated DBPs and the overall calculated cytotoxicity and genotoxicity of DBPs. However, the acute toxicity and genotoxicity of the wastewater decreased by 7% and 100%, respectively, when bromide was added to the UV/chlorine treatment. This study illuminated that UV/chlorine treatment can decrease acute and geno- toxicities of wastewater efficiently.

Removal of micropollutants in drinking water using UV-LED/chlorine advanced oxidation process followed by activated carbon adsorption

This study investigated the removal of three selected micropollutants (i.e., bisphenol A, diclofenac and caffeine) in drinking water using the UV-LED/chlorine advanced oxidation process (AOP) followed by activated carbon adsorption. The degradation of bisphenol A, diclofenac and caffeine was predominantly contributed by chlorination (>60%), direct UV photolysis (>80%) and radical oxidation (>90%), respectively, during the treatment by the UV-LED/chlorine AOP at three tested UV wavelengths (i.e., 265, 285 and 300 nm). The most effective UV wavelengths for the degradation of bisphenol A, diclofenac and caffeine were 265, 285 and 300 nm, respectively. The degradation of all the three micropollutants was enhanced with increasing pH from 6 to 8, though the reasons for the pH dependence were different. The residues of the micropollutants and their degradation (by)products were removed by post-adsorption using granular activated carbon (GAC). Interestingly and more importantly, the adsorption rates of the degradation (by)products were 2-3 times higher than the adsorption rates of the corresponding micropollutants, indicating the formation of more adsorbable (by)products after the AOP pre-treatment. The UV-LED/chlorine AOP followed by GAC adsorption provides a multi-barrier treatment system for enhancing micropollutant removal in potable water. The findings also suggest the merit of the sequential use of UV-LEDs followed by GAC in treating chlorine-containing potable water in small-scale water treatment systems (e.g., point-of-use or point-of-entry water purifiers).