Yeast mating for combinatorial Fab library generation and surface display

Bovine ultralong CDR-H3 derived knob paratopes elicit potent TNF-α neutralization and enable the generation of novel adalimumab-based antibody architectures with augmented features

In this work we have generated cattle-derived chimeric ultralong CDR-H3 antibodies targeting tumor necrosis factor α (TNF-α) via immunization and yeast surface display. We identified one particular ultralong CDR-H3 paratope that potently neutralized TNF-α. Interestingly, grafting of the knob architecture onto a peripheral loop of the CH3 domain of the Fc part of an IgG1 resulted in the generation of a TNF-α neutralizing Fc (Fcknob) that did not show any potency loss compared with the parental chimeric IgG format. Eventually, grafting this knob onto the CH3 region of adalimumab enabled the engineering of a novel TNF-α targeting antibody architecture displaying augmented TNF-α inhibition.

Immunoglobulin constant regions provide stabilization to the paratope and enforce epitope specificity

Constant domains in antibody molecules at the level of the Fab (CH1 and CL) have long been considered to be simple scaffolding elements that physically separate the paratope-defining variable (V) region from the effector function-mediating constant (C) regions. However, due to recent findings that C domains of different isotypes can modulate the fine specificity encoded in the V region, elucidating the role of C domains in shaping the paratope and influencing specificity is a critical area of interest. To dissect the relative contributions of each C domain to this phenomenon, we generated antibody fragments with different C regions omitted, using a set of antibodies targeting capsular polysaccharides from the fungal pathogen, Cryptococcus neoformans. Antigen specificity mapping and functional activity measurements revealed that V region-only antibody fragments exhibited poly-specificity to antigenic variants and extended to recognition of self-antigens, while measurable hydrolytic activity of the capsule was greatly attenuated. To better understand the mechanistic origins of the remarkable loss of specificity that accompanies the removal of C domains from identical paratopes, we performed molecular dynamics simulations which revealed increased paratope plasticity in the scFv relative to the corresponding Fab. Together, our results provide insight into how the remarkable specificity of immunoglobulins is governed and maintained at the level of the Fab through the enforcement of structural restrictions on the paratope by CH1 domains.

An integrated technology for quantitative wide mutational scanning of human antibody Fab libraries

Antibodies are engineerable quantities in medicine. Learning antibody molecular recognition would enable the in silico design of high affinity binders against nearly any proteinaceous surface. Yet, publicly available experiment antibody sequence-binding datasets may not contain the mutagenic, antigenic, or antibody sequence diversity necessary for deep learning approaches to capture molecular recognition. In part, this is because limited experimental platforms exist for assessing quantitative and simultaneous sequence-function relationships for multiple antibodies. Here we present MAGMA-seq, an integrated technology that combines multiple antigens and multiple antibodies and determines quantitative biophysical parameters using deep sequencing. We demonstrate MAGMA-seq on two pooled libraries comprising mutants of nine different human antibodies spanning light chain gene usage, CDR H3 length, and antigenic targets. We demonstrate the comprehensive mapping of potential antibody development pathways, sequence-binding relationships for multiple antibodies simultaneously, and identification of paratope sequence determinants for binding recognition for broadly neutralizing antibodies (bnAbs). MAGMA-seq enables rapid and scalable antibody engineering of multiple lead candidates because it can measure binding for mutants of many given parental antibodies in a single experiment.

Development of Recombinant Antibody by Yeast Surface Display Technology

Recombinant antibodies have emerged as powerful tools in various fields, including therapeutics, diagnostics, and research applications. The selection of high-affinity antibodies with desired specificity is a crucial step in the development of recombinant antibody-based products. In recent years, yeast surface display technology has gained significant attention as a robust and versatile platform for antibody selection. This graphical review provides an overview of the yeast surface display technology and its applications in recombinant antibody selection. We discuss the key components involved in the construction of yeast surface display libraries, including the antibody gene libraries, yeast host strains, and display vectors. Furthermore, we highlight the strategies employed for affinity maturation and optimization of recombinant antibodies using yeast surface display. Finally, we discuss the advantages and limitations of this technology compared to other antibody selection methods. Overall, yeast surface display technology offers a powerful and efficient approach for the selection of recombinant antibodies, enabling the rapid generation of high-affinity antibodies for various applications.

An integrated technology for quantitative wide mutational scanning of human antibody Fab libraries

Antibodies are engineerable quantities in medicine. Learning antibody molecular recognition would enable the in silico design of high affinity binders against nearly any proteinaceous surface. Yet, publicly available experiment antibody sequence-binding datasets may not contain the mutagenic, antigenic, or antibody sequence diversity necessary for deep learning approaches to capture molecular recognition. In part, this is because limited experimental platforms exist for assessing quantitative and simultaneous sequence-function relationships for multiple antibodies. Here we present MAGMA-seq, an integrated technology that combines multiple antigens and multiple antibodies and determines quantitative biophysical parameters using deep sequencing. We demonstrate MAGMA-seq on two pooled libraries comprising mutants of ten different human antibodies spanning light chain gene usage, CDR H3 length, and antigenic targets. We demonstrate the comprehensive mapping of potential antibody development pathways, sequence-binding relationships for multiple antibodies simultaneously, and identification of paratope sequence determinants for binding recognition for broadly neutralizing antibodies (bnAbs). MAGMA-seq enables rapid and scalable antibody engineering of multiple lead candidates because it can measure binding for mutants of many given parental antibodies in a single experiment.

A next-generation Fab library platform directly yielding drug-like antibodies with high affinity, diversity, and developability

We previously described an in vitro single-chain fragment (scFv) library platform originally designed to generate antibodies with excellent developability properties. The platform design was based on the use of clinical antibodies as scaffolds into which replicated natural complementarity-determining regions purged of sequence liabilities were inserted, and the use of phage and yeast display to carry out antibody selection. In addition to being developable, antibodies generated using our platform were extremely diverse, with most campaigns yielding sub-nanomolar binders. Here, we describe a platform advancement that incorporates Fab phage display followed by single-chain antibody-binding fragment Fab (scFab) yeast display. The scFab single-gene format provides balanced expression of light and heavy chains, with enhanced conversion to IgG, thereby combining the advantages of scFvs and Fabs. A meticulously engineered, quality-controlled Fab phage library was created using design principles similar to those used to create the scFv library. A diverse panel of binding scFabs, with high conversion efficiency to IgG, was isolated against two targets. This study highlights the compatibility of phage and yeast display with a Fab semi-synthetic library design, offering an efficient approach to generate drug-like antibodies directly, facilitating their conversion to potential therapeutic candidates.

Engineering hydrophobicity and manufacturability for optimized biparatopic antibody-drug conjugates targeting c-MET

Optimal combinations of paratopes assembled into a biparatopic antibody have the capacity to mediate high-grade target cross-linking on cell membranes, leading to degradation of the target, as well as antibody and payload delivery in the case of an antibody-drug conjugate (ADC). In the work presented here, molecular docking suggested a suitable paratope combination targeting c-MET, but hydrophobic patches in essential binding regions of one moiety necessitated engineering. In addition to rational design of HCDR2 and HCDR3 mutations, site-specific spiking libraries were generated and screened in yeast and mammalian surface display approaches. Comparative analyses revealed similar positions amendable for hydrophobicity reduction, with a broad combinatorial diversity obtained from library outputs. Optimized variants showed high stability, strongly reduced hydrophobicity, retained affinities supporting the desired functionality and enhanced producibility. The resulting biparatopic anti-c-MET ADCs were comparably active on c-MET expressing tumor cell lines as REGN5093 exatecan DAR6 ADC. Structural molecular modeling of paratope combinations for preferential inter-target binding combined with protein engineering for manufacturability yielded deep insights into the capabilities of rational and library approaches. The methodologies of in silico hydrophobicity identification and sequence optimization could serve as a blueprint for rapid development of optimal biparatopic ADCs targeting further tumor-associated antigens in the future.

A fine-tuned yeast surface-display/secretion platform enables the rapid discovery of neutralizing antibodies against Clostridioides difficile toxins

BACKGROUND

Neutralizing antibody plays a key role in protecting hosts from invasive pathogens and their virulent components. Current high-throughput assays for antibody screening are based on binding activities. However, those antibodies with high affinity may not have neutralizing activities. Subsequent functionality assays are necessary to identify neutralizing antibodies from binders with high affinity to their target antigens, which is laborious and time-consuming. Therefore, a versatile platform that can rapidly identify antibodies with both high binding affinity and neutralizing activity is desired to curb future pandemics like COVID-19.

RESULTS

In this proof-of-concept study, we adapted Saccharomyces cerevisiae to either display human antibodies on the yeast surface or secrete soluble antibodies into the cultivation supernatant under a controllable 'switch' through different carbon source induced promoters. Initially, an engineered chimeric-bispecific Fab antibody, derived from humanized nanobodies against both Clostridioides difficile toxin A and B (TcdA and TcdB), was successfully expressed either on the yeast cell surface or in the culture medium with intact bioactivity, suggesting the applicability of our system in antibody display and secretion. Next, a combinatorial Fab library was constructed from B cells isolated from a convalescent patient with a high serological neutralizing titer against TcdB. Following three rounds of magnetic bead enrichment and one round of flow cytometry sorting, antibodies against TcdB were enriched efficiently. We then sorted out single binders with high binding affinity and induced them to express soluble antibodies in culture medium. The neutralizing activity of culture supernatant was analyzed using cell-based assay immediately. This way, we rapidly identified two unique neutralizers (out of seven binders) that can neutralize the cytotoxicity of TcdB.

CONCLUSION

The antibody screening platform described here simplifies the neutralizing antibody discovery procedure and will be an attractive alternative for screening functional antibodies against infectious diseases.

Selection of High-Affinity Heterodimeric Antigen-Binding Fc Fragments from a Large Yeast Display Library

Antigen-binding Fc (Fcab™) fragments, where a novel antigen binding site is introduced by the mutagenesis of the C-terminal loops of the C_H3 domain, function as parts of bispecific IgG-like symmetrical antibodies when they replace their wild-type Fc. Their homodimeric structure typically leads to bivalent antigen binding. In particular, biological situations monovalent engagement, however, would be preferred, either for avoiding agonistic effects leading to safety issues, or the attractive option of combining a single chain (i.e., one half) of an Fcab fragment reactive with different antigens in one antibody. We present the strategies for construction and selection of yeast libraries displaying heterodimeric Fcab fragments and discuss the effects of altered thermostability of the basic Fc scaffold and novel library designs that lead to isolation of highly affine antigen binding clones.

A Two-Step Golden Gate Cloning Procedure for the Generation of Natively Paired YSD Fab Libraries

In vitro antibody display libraries have emerged as powerful tools for a streamlined discovery of novel antibody binders. While in vivo antibody repertoires are matured and selected as a specific pair of variable heavy and light chains (VH and VL) with optimal specificity and affinity, during the recombinant generation of in vitro libraries, the native sequence pairing is not maintained. Here we describe a cloning method that combines the flexibility and versatility of in vitro antibody display with the advantages of natively paired VH-VL antibodies. In this regard, VH-VL amplicons are cloned via a two-step Golden Gate cloning procedure, allowing the display of Fab fragments on yeast cells.

An overview on display systems (phage, bacterial, and yeast display) for production of anticancer antibodies; advantages and disadvantages

Antibodies as ideal therapeutic and diagnostic molecules are among the top-selling drugs providing considerable efficacy in disease treatment, especially in cancer therapy. Limitations of the hybridoma technology as routine antibody generation method in conjunction with numerous developments in molecular biology led to the development of alternative approaches for the streamlined identification of most effective antibodies. In this regard, display selection technologies such as phage display, bacterial display, and yeast display have been widely promoted over the past three decades as ideal alternatives to traditional methods. The display of antibodies on phages is probably the most widespread of these methods, although surface display on bacteria or yeast have been employed successfully, as well. These methods using various sizes of combinatorial antibody libraries and different selection strategies possessing benefits in screening potency, generating, and isolation of high affinity antibodies with low risk of immunogenicity. Knowing the basics of each method assists in the design and retrieval process of antibodies suitable for different diseases, including cancer. In this review, we aim to outline the basics of each library construction and its display method, screening and selection steps. The advantages and disadvantages in comparison to alternative methods, and their applications in antibody engineering will be explained. Finally, we will review approved or non-approved therapeutic antibodies developed by employing these methods, which may serve as therapeutic antibodies in cancer therapy.

Grabbing the Bull by Both Horns: Bovine Ultralong CDR-H3 Paratopes Enable Engineering of 'Almost Natural' Common Light Chain Bispecific Antibodies Suitable For Effector Cell Redirection

A subset of antibodies found in cattle comprises ultralong CDR-H3 regions of up to 70 amino acids. Interestingly, this type of immunoglobulin usually pairs with the single germline VL gene, V30 that is typically very conserved in sequence. In this work, we have engineered ultralong CDR-H3 common light chain bispecific antibodies targeting Epidermal Growth Factor Receptor (EGFR) on tumor cells as well as Natural Cytotoxicity Receptor NKp30 on Natural Killer (NK) cells. Antigen-specific common light chain antibodies were isolated by yeast surface display by means of pairing CDR-H3 diversities following immunization with a single V30 light chain. After selection, EGFR-targeting paratopes as well as NKp30-specific binders were combined into common light chain bispecific antibodies by exploiting the strand-exchange engineered domain (SEED) technology for heavy chain heterodimerization. Biochemical characterization of resulting bispecifics revealed highly specific binding to the respective antigens as well as simultaneous binding to both targets. Most importantly, engineered cattle-derived bispecific common light chain molecules elicited potent NK cell redirection and consequently tumor cell lysis of EGFR-overexpressing cells as well as robust release of proinflammatory cytokine interferon-γ. Taken together, this data is giving clear evidence that bovine bispecific ultralong CDR-H3 common light chain antibodies are versatile for biotechnological applications.

Antibodies binding diverse pertactin epitopes protect mice from B. pertussis infection

Infection by the bacterium Bordetella pertussis continues to cause considerable morbidity and mortality worldwide. Many current acellular pertussis vaccines include the antigen pertactin, which has presumptive adhesive and immunomodulatory activities, but is rapidly lost from clinical isolates after the introduction of these vaccines. To better understand the contributions of pertactin antibodies to protection and pertactin's role in pathogenesis, we isolated and characterized recombinant antibodies binding four distinct epitopes on pertactin. We demonstrate that four of these antibodies bind epitopes that are conserved across all three classical Bordetella strains, and competition assays further showed that antibodies binding these epitopes are also elicited by B. pertussis infection of baboons. Surprisingly, we found that representative antibodies binding each epitope protected mice against experimental B. pertussis infection. A cocktail of antibodies from each epitope group protected mice against a subsequent lethal dose of B. pertussis and greatly reduced lung colonization levels after sublethal challenge. Each antibody reduced B. pertussis lung colonization levels up to 100-fold when administered individually, which was significantly reduced when antibody effector functions were impaired, with no antibody mediating antibody-dependent complement-induced lysis. These data suggest that antibodies binding multiple pertactin epitopes protect primarily by the same bactericidal mechanism, which overshadows contributions from blockade of other pertactin functions. These antibodies expand the available tools to further dissect pertactin's role in infection and understand the impact of antipertactin antibodies on bacterial fitness.

Yeast Mating as a Tool for Highly Effective Discovery and Engineering of Antibodies via Display Methodologies

Yeast surface display (YSD) is a powerful methodology for discovery and engineering of antibodies, and the yeast mating has been used to overcome low transformation efficiency of yeast in antibody library generation. We developed an optimized method of yeast mating for generating a large, combinatorial antibody fragment library and heterodimeric protein library by cellular fusion between two haploid cells carrying different library each other. This method allows for increased diversity in screening of target-specific fragment antigen-binding (Fab) antibodies as well as in the development of heterodimeric Fc variants for bi-specific antibody generation and T-cell receptor (TCR). Here we describe the efficient isolation of human antibodies against the activated GTP-bound form of the oncogenic Ras mutant (KRas^G12D-GTP) by sequential isolation of their heavy chains (HCs) followed by combination with light chains (LCs) via the yeast mating process. This strategy facilitates guided selection of the antigen-specific HC with either a fixed functional LC, which has cytosol penetrating ability, or an LC library to generate the Fab. It also allows for deeper exploration of a sequence space with fixed diversity, leading to a higher probability of successful isolation of human antibodies with high specificity and affinity.

Milking the Cow: Cattle-Derived Chimeric Ultralong CDR-H3 Antibodies and Their Engineered CDR-H3-Only Knobbody Counterparts Targeting Epidermal Growth Factor Receptor Elicit Potent NK Cell-Mediated Cytotoxicity

In this work, we have generated epidermal growth factor receptor (EGFR)-specific cattle-derived ultralong CDR-H3 antibodies by combining cattle immunization with yeast surface display. After immunization, ultralong CDR-H3 regions were specifically amplified and grafted onto an IGHV1-7 scaffold by homologous recombination to facilitate Fab display. Antigen-specific clones were readily obtained by fluorescence-activated cell sorting (FACS) and reformatted as chimeric antibodies. Binning experiments revealed epitope targeting of domains I, II, and IV of EGFR with none of the generated binders competing with Cetuximab, Matuzumab, or EGF for binding to EGFR. Cattle-derived chimeric antibodies were potent in inducing antibody-dependent cell-mediated cytotoxicity (ADCC) against EGFR-overexpressing tumor cells with potencies (EC50 killing) in the picomolar range. Moreover, most of the antibodies were able to significantly inhibit EGFR-mediated downstream signaling. Furthermore, we demonstrate that a minor fraction of CDR-H3 knobs derived from generated antibodies was capable of independently functioning as a paratope facilitating EGFR binding when grafted onto the Fc part of human IgG1. Besides slightly to moderately diminished capacities, these engineered Knobbodies largely retained main properties of their parental antibodies such as cellular binding and triggering of ADCC. Hence, Knobbodies might emerge as promising tools for biotechnological applications upon further optimization.

Development of an Antigen-Antibody Co-Display System for Detecting Interaction of G-Protein-Coupled Receptors and Single-Chain Variable Fragments

G-protein-coupled receptors (GPCRs), especially chemokine receptors, are ideal targets for monoclonal antibody drugs. Considering the special multi-pass transmembrane structure of GPCR, it is often a laborious job to obtain antibody information about off-targets and epitopes on antigens. To accelerate the process, a rapid and simple method needs to be developed. The split-ubiquitin-based yeast two hybrid system (YTH) was used as a blue script for a new method. By fusing with transmembrane peptides, scFv antibodies were designed to be anchored on the cytomembrane, where the GPCR was co-displayed as well. The coupled split-ubiquitin system transformed the scFv-GPCR interaction signal into the expression of reporter genes. By optimizing the topological structure of scFv fusion protein and key elements, including signal peptides, transmembrane peptides, and flexible linkers, a system named Antigen-Antibody Co-Display (AACD) was established, which rapidly detected the interactions between antibodies and their target GPCRs, CXCR4 and CXCR5, while also determining the off-target antibodies and antibody-associated epitopes. The AACD system can rapidly determine the association between GPCRs and their candidate antibodies and shorten the research period for off-target detection and epitope identification. This system should improve the process of GPCR antibody development and provide a new strategy for GPCRs antibody screening.

Antibody display technologies: selecting the cream of the crop

Antibody display technologies enable the successful isolation of antigen-specific antibodies with therapeutic potential. The key feature that facilitates the selection of an antibody with prescribed properties is the coupling of the protein variant to its genetic information and is referred to as genotype phenotype coupling. There are several different platform technologies based on prokaryotic organisms as well as strategies employing higher eukaryotes. Among those, phage display is the most established system with more than a dozen of therapeutic antibodies approved for therapy that have been discovered or engineered using this approach. In recent years several other technologies gained a certain level of maturity, most strikingly mammalian display. In this review, we delineate the most important selection systems with respect to antibody generation with an emphasis on recent developments.

Harnessing the power of directed evolution to improve genome editing systems

The recent development of genome editing systems, such as zinc-finger nucleases, transcription activator-like effectors, CRISPR-Cas nucleases, and base editors has enabled the unprecedented capability to engineer the genomes of living cells. The ever-increasing demand for genome editors with improved accuracy, activity, and functionality has stimulated significant efforts to further engineer the genome editing systems. Directed evolution represents a promising strategy to improve the existing genome editing systems and enable new editing functions. Here, we review recent representative strategies to harness the power of directed evolution to improve genome editing systems, which have led to state-of-the-art genome editors that have significant implications for diverse applications in both laboratories and clinics.

FACS-Based Functional Protein Screening via Microfluidic Co-encapsulation of Yeast Secretor and Mammalian Reporter Cells

In this study, we present a straightforward approach for functional cell-based screening by co-encapsulation of secretor yeast cells and reporter mammalian cells in millions of individual agarose-containing microdroplets. Our system is compatible with ultra-high-throughput selection utilizing standard fluorescence-activated cell sorters (FACS) without need of extensive adaptation and optimization. In a model study we co-encapsulated murine interleukin 3 (mIL-3)-secreting S. cerevisiae cells with murine Ba/F3 reporter cells, which express green fluorescent protein (GFP) upon stimulation with mIL-3, and could observe specific and robust induction of fluorescence signal compared to a control with yeast cells secreting a non-functional mIL-3 mutant. We demonstrate the successful enrichment of activating mIL-3 wt-secreting yeast cells from a 1:10,000 dilution in cells expressing the inactive cytokine variant by two consecutive cycles of co-encapsulation and FACS. This indicates the suitability of the presented strategy for functional screening of high-diversity yeast-based libraries and demonstrates its potential for the efficient isolation of clones secreting bioactive recombinant proteins.

mRNA display with library of even-distribution reveals cellular interactors of influenza virus NS1

A comprehensive examination of protein-protein interactions (PPIs) is fundamental for the understanding of cellular machineries. However, limitations in current methodologies often prevent the detection of PPIs with low abundance proteins. To overcome this challenge, we develop a mRNA display with library of even-distribution (md-LED) method that facilitates the detection of low abundance binders with high specificity and sensitivity. As a proof-of-principle, we apply md-LED to IAV NS1 protein. Complementary to AP-MS, md-LED enables us to validate previously described PPIs as well as to identify novel NS1 interactors. We show that interacting with FASN allows NS1 to directly regulate the synthesis of cellular fatty acids. We also use md-LED to identify a mutant of NS1, D92Y, results in a loss of interaction with CPSF1. The use of high-throughput sequencing as the readout for md-LED enables sensitive quantification of interactions, ultimately enabling massively parallel experimentation for the investigation of PPIs.

FN3 Protein Conjugates for Cancer Diagnosis and Imaging Studies

Bioconjugation of biologically useful proteins is in great demand (e.g., conjugation to biotins, metal chelators, and drug carriers to target specific tissues for both in vitro and in vivo use). These conjugates provide widespread opportunities for various biological and biomedical applications. Evolving state-of-the-art protein conjugation strategies have led to the development of many affinity ligands, including for cancer imaging and diagnosis. However, to achieve the desirable protein conjugates, there are many challenges that remain to be addressed in order to obtain a reproducible procedure for all proteins and ligands. These include a control over the protein modification and the efficiency of the conjugation while retaining the original biological protein affinity postmodification. Here we present detailed conjugation methods for the human fibronectin tenth type III domain (FN3) protein scaffold for use in preclinical PET imaging. More specifically, this chapter provides detailed methods to produce a FN3 and a FN3-chelator-conjugate, its labeling with the radionuclide 64-Cu, and its use for noninvasive PET imaging in mice.

Generation of a Fully Human scFv that binds Tumor-Specific Glycoforms

Tumor-specific glycosylation changes are an attractive target for the development of diagnostic and therapeutic applications. Periostin is a glycoprotein with high expression in many tumors of epithelial origin including ovarian cancer. Strategies to target the peptide portion of periostin as a diagnostic or therapeutic biomarker for cancer are limited due to increased expression of periostin in non-cancerous inflammatory conditions. Here, we have screened for antibody fragments that recognize the tumor-specific glycosylation present on glycoforms of periostin containing bisecting N-glycans in ovarian cancer using a yeast-display library of antibody fragments, while subtracting those that bind to the periostin protein with glycoforms found in non-malignant cell types. We generated a biotinylated form of a fully human scFv antibody (scFvC9) that targets the bisecting N-glycans expressed by cancer cells. Validation studies in vitro and in vivo using scFvC9 indicate this antibody can be useful for the development of diagnostic, imaging, and therapeutic applications for cancers that express the antigen.

Affinity maturation of an TpoR targeting antibody in full-length IgG form for enhanced agonist activity

It has been observed that converting scFv formatted antibodies to full-length IgG often associates with loss of affinity. We aim to address this issue in this paper by establishing an integrated affinity maturation method applying yeast display technology platform. To demonstrate that, we employed a human thrombopoietin receptor targeting antibody named 3D9 which was identified previously from a combinational antibody library in scFv-Fc fusion protein form. We have observed that significant potency loss happened when 3D9 was transformed to full-length IgG form. In this study, we tested whether the potency of the full-length IgG can be improved by affinity maturation of 3D9 using a modified Fab yeast display platform. An efficient CDR3 targeted mutagenesis strategy was designed for Fab library with pre-designed CDR diversity. Next generation sequencing was also used for evaluation of the enrichment process and investigation of sequence-function relationship of the antibody. A variant with improved affinity and higher potency was identified. The study demonstrates that the strategy we used here are efficient for optimizing affinity and activity of full-length IgGs.

Yeast Surface Display and Cell Sorting of Antigen-Binding Fc Fragments

Since the introduction of the yeast display platform, this method has increasingly gained popularity for the discovery and affinity maturation of antibodies and other protein scaffolds intended for antigen recognition. Yeast display is particularly well suited for the selection of antigen-binding Fc fragments (Fcabs) as it allows rapid combinatorial library construction via gap repair-driven homologous recombination and an efficient display of a glycosylated Fc able to interact with Fcγ receptors. Apart from expression-related normalization, isolation of properly folded Fcabs can be guided efficiently by simultaneous staining with ligands such as protein A, FcγRI, or the conformation-sensitive anti-FigC_H2 antibody, whose binding is critically dependent on the integrity of the Fc structure. The particular properties of the Fcab scaffold, such as its homodimeric state which can promote binding to multiple antigen molecules, require modifications of traditional affinity maturation strategies. Preferred to equilibrium selections are kinetically driven antigen selections, designed to specifically influence the binding off-rate, which in many cases augments the desired biological effect. A simple design of a yeast-displayed heterodimeric Fc fragment is described and can be used as a general guideline for affinity selection of Fcabs with an asymmetric binding site. Overall, this chapter underlines the importance of the versatile yeast display technique for the optimization of the novel Fcab scaffold for antigen recognition.

Identification of high affinity HER2 binding antibodies using CHO Fab surface display

Discovery of monoclonal antibodies is most commonly performed using phage or yeast display but mammalian cells are used for production because of the complex antibody structure, including the multiple disulfide bonds and glycosylation, required for function. As this transition between host organisms is often accompanied by impaired binding, folding or expression, development pipelines include laborious plate-based screening or engineering strategies to adapt an antibody to mammalian expression. To circumvent these problems, we developed a plasmid-based Fab screening platform on Chinese hamster ovary (CHO) cells which allows for antibody selection in the production host and in the presence of the same post-translational modifications as the manufactured product. A hu4D5 variant with low affinity for the human epidermal growth factor receptor (HER2) growth factor receptor was mutagenized and this library of ~10(6) unique clones was screened to identify variants with up to 400-fold enhanced HER2 binding. After two rounds of fluorescence activated cell sorting (FACS), four unique clones exhibited improved antigen binding when expressed on the CHO surface or as purified human IgG. Three of the four clones contained free cysteines in third complementarity determining region of the antibody heavy chain, which did not impair expression or cause aggregation. The improved clones had similar yields and stabilities as hu4D5 and similar sub-nanomolar affinities as measured by equilibrium binding to target cells. The limited size of mammalian libraries restricts the utility of this approach for naïve antibody library screening, but it is a powerful approach for antibody affinity maturation or specificity enhancement and is readily generalizable to engineering other surface receptors, including T-cell receptors and chimeric antigen receptors.

Biosynthesis of (deoxy)guanosine-5'-triphosphate by GMP kinase and acetate kinase fixed on the surface of E. coli

(Deoxy)guanosine-5'-triphosphate (5'-(d)GTP), the precursor for synthesizing DNA or RNA in vivo, is an important raw material for various modern biotechnologies based on PCR. In this study, we investigated the application of whole-cell catalysts constructed by bacterial cell surface display in biosynthetic reactions of 5'-(d)GTP from (deoxy)guanosine-5'-monophosphate (5'-(d)GMP). By N-terminal or N- and C-terminal fusion of the ice nucleation protein, we successfully displayed the GMP kinase of Lactobacillus bulgaricus and the acetate kinase of E. coli on the surface of E. coli cells. A large amount of soluble target protein was obtained upon induction with 0.2 mM IPTG at 25 °C for 30 h. The conversion of dGMP was up to 91% when catalysed by the surface-displayed enzymes at 37 °C for 4 h. Up to 95% of the GMP was converted after 3 h of reaction. The stability of the whole-cell catalyst at 37 °C was very good. The enzyme activity was maintained above 50% after 9 rounds of recovery. Our research showed that only one-twentieth of the initial substrate concentration of added ATP was sufficient to meet the reaction requirements.

Facile generation of antibody heavy and light chain diversities for yeast surface display by Golden Gate Cloning

Antibodies can be successfully engineered and isolated by yeast or phage display of combinatorial libraries. Still, generation of libraries comprising heavy chain as well as light chain diversities is a cumbersome process involving multiple steps. Within this study, we set out to compare the output of yeast display screening of antibody Fab libraries from immunized rodents that were generated by Golden Gate Cloning (GGC) with the conventional three-step method of individual heavy- and light-chain sub-library construction followed by chain combination via yeast mating (YM). We demonstrate that the GGC-based one-step process delivers libraries and antibodies from heavy- and light-chain diversities with similar quality to the traditional method while being significantly less complex and faster. Additionally, we show that this method can also be used to successfully screen and isolate chimeric chicken/human antibodies following avian immunization.

Selection of Antibodies with Tailored Properties by Application of High-Throughput Multiparameter Fluorescence-Activated Cell Sorting of Yeast-Displayed Immune Libraries

In this study, we present a multiparameter screening procedure for the identification of target-specific antibodies with prescribed properties. Based on B cell receptor gene repertoires from transgenic rats, yeast surface display libraries were generated, and high-affinity human antibodies were readily isolated. We demonstrate that specific desirable features, i.e., species' cross-reactivity and a broad epitope coverage can be integrated into the screening procedure using high-throughput fluorescence-activated cell sorting. We show that the applied screening stringencies translate directly into binding properties of isolated human antibody variants.

Isolation of pH-Sensitive Antibody Fragments by Fluorescence-Activated Cell Sorting and Yeast Surface Display

Fluorescence-activated cell sorting (FACS) in combination with yeast surface display (YSD) has proven to be a valuable tool for the engineering of antibodies. It enables the fast and robust identification and isolation of candidates with prescribed characteristics from combinatorial libraries. A novel application for FACS and YSD that has recently evolved addresses the engineering of antibodies toward pH-switchable antigen binding, aiming at reduced binding at acidic pH, compared to neutral pH. Therefore, we give guidance for the incorporation of such pH switches into antibody variable domains using combinatorial histidine scanning libraries. The protocol describes a flow cytometric sorting technique for the enrichment of antigen-specific molecules. Moreover, we provide information on how to screen the obtained antibody pools from initial sorting to isolate and characterize pH-sensitive variants.

Fab is the most efficient format to express functional antibodies by yeast surface display

Multiple formats are available for engineering of monoclonal antibodies (mAbs) by yeast surface display, but they do not all lead to efficient expression of functional molecules. We therefore expressed four anti-tumor necrosis factor and two anti-IpaD mAbs as single-chain variable fragment (scFv), antigen-binding fragment (Fab) or single-chain Fabs and compared their expression levels and antigen-binding efficiency. Although the scFv and scFab formats are widely used in the literature, 2 of 6 antibodies were either not or weakly expressed. In contrast, all 6 antibodies expressed as Fab revealed strong binding and high affinity, comparable to that of the soluble form. We also demonstrated that the variations in expression did not affect Fab functionality and were due to variations in light chain display and not to misfolded dimers. Our results suggest that Fab is the most versatile format for the engineering of mAbs.

A novel one-step approach for the construction of yeast surface display Fab antibody libraries

BACKGROUND

Yeast surface display (YSD) has proven to be a versatile platform technology for antibody discovery. However, the construction of antibody Fab libraries typically is a tedious three-step process that involves the generation of heavy chain as well as light chain display plasmids in different haploid yeast strains followed by yeast mating.

RESULTS

Within this study, we aimed at implementing a focused Golden Gate Cloning approach for the generation of YSD libraries. For this, antibodies heavy and light chains were encoded on one single plasmid. Fab display on yeast cells was either mediated by a two-directional promoter system (2dir) or by ribosomal skipping (bicis). The general applicability of this methodology was proven by the functional display of a therapeutic antibody. Subsequently, we constructed large antibody libraries with heavy chain diversities derived from CEACAM5 immunized animals in combination with a common light chain. Target-specific antibodies from both display systems were readily obtained after three rounds of fluorescence activated cell sorting. Isolated variants exhibited high affinities in the nanomolar and subnanomolar range as well as appropriate biophysical properties.

CONCLUSION

We demonstrated that Golden Gate Cloning appears to be a valid tool for the generation of large yeast surface display antibody Fab libraries. This procedure simplifies the hit discovery process of antibodies from immune repertoires.

Selection of Antibody Fragments by Yeast Display

The critical need for renewable, high-quality affinity reagents in biological research, as well as for diagnostic and therapeutic applications, has required the development of new platforms of discovery. Yeast display is one of the main methods of in vitro display technology with phage display. Yeast display has been chosen by numerous groups to refine both affinity and specificity of antibodies because it enables fine discrimination between mutant clones of similar affinity. In addition, the construction of display libraries of antibody fragments in yeast permits to sample the immune antibody repertoire more fully than using phage. This chapter gives an updated overview of the available systems of yeast display platforms and libraries, followed up by technical descriptions of selection methods of antibody fragments by yeast display.

A Streamlined Approach for the Construction of Large Yeast Surface Display Fab Antibody Libraries

Yeast surface display is a versatile platform technology for antibody discovery. Nevertheless, the construction of antibody Fab libraries typically is a tedious multistep process that involves the generation of heavy chain as well as light chain display plasmids in different haploid yeast strains followed by yeast mating. Here, we present a focused one-step Golden Gate cloning approach for the generation of yeast surface display Fab libraries that allows for simultaneous introduction of heavy-chain and light-chain variable regions into one single display vector. Thereby, the overall time as well as the materials needed for library generation can be reduced significantly.

Creation of Stable Heterothallic Strains of Komagataella phaffii Enables Dissection of Mating Gene Regulation

The methylotrophic yeast Komagataella phaffii (Pichia pastoris) is homothallic and has been reported to switch mating type by an ancient inversion mechanism. Two mating-type (MAT) loci include homologs of the MATa and MATα transcription factor genes, with the expression from one locus downregulated by telomere position effects. However, not much is known about mating gene regulation, since the mixture of mating types complicates detailed investigations. In this study, we developed K. phaffii strains with stable mating types by deletion of the inverted-repeat region required for mating-type switching. These heterothallic strains retain their ability to mate with cells of the opposite mating type and were used to further elucidate mating gene regulation. Functional analysis of MAT mutant strains revealed the essential role of MATa2 and MATα1 in diploid cell formation. Disruption of MATa1 or MATα2 did not affect mating; however, in diploid cells, both genes are required for sporulation and the repression of shmoo formation. The heterothallic strains generated in this study allowed the first detailed characterization of mating gene regulation in K. phaffii They will be a valuable tool for further studies investigating cell-type-specific behavior and will enable in-depth genetic analyses and strain hybridization in this industrially relevant yeast species.

Generation of human bispecific common light chain antibodies by combining animal immunization and yeast display

Bispecific antibodies (bsAbs) pave the way for novel therapeutic modes of action along with potential benefits in several clinical applications. However, their generation remains challenging due to the necessity of correct pairings of two different heavy and light chains and related manufacturability issues. We describe a generic approach for the generation of fully human IgG-like bsAbs. For this, heavy chain repertoires from immunized transgenic rats were combined with either a randomly chosen common light chain or a light chain of an existing therapeutic antibody and screened for binders against tumor-related targets CEACAM5 and CEACAM6 by yeast surface display. bsAbs with subnanomolar affinities were identified, wherein each separate binding arm mediated specific binding to the respective antigen. Altogether, the described strategy represents a combination of in vivo immunization with an in vitro selection method, which allows for the integration of existing therapeutic antibodies into a bispecific format.

Efficient construct of a large and functional scFv yeast display library derived from the ascites B cells of ovarian cancer patients by three-fragment transformation-associated recombination

Over the past decade, yeast display technology has emerged as a powerful tool for the isolation of high-affinity immunoglobulin fragments with potential utility as clinical diagnostic and therapeutic reagents. Despite significant refinement of the various methodologies underpinning library construction and selections, certain aspects remain challenging and process limiting. We have sought to significantly improve the robustness of the single-chain Fv (scFv) library construction step by overcoming the technical inefficiencies frequently encountered during the PCR-mediated assembly of scFvs from the discrete heavy and light V-domain repertoires. Using a novel primer set designed to provide maximum amplification coverage of the known germ-line V-domain repertoire, we have exploited the potential of the in vivo homologous gap-repair apparatus of Saccharomyces cerevisiae to assemble intact scFvs directly from co-transformed PBMC-derived VH, VL, and linearized vector component fragments. We have successfully applied this three-fragment assembly strategy to construct a large (>10(9)) scFv yeast display library from the ascites immune repertoire of ovarian cancer patients and validated the approach by applying FACS-based sorting to readily isolate scFvs that recognize various tumor marker antigens (TMAs). It is expected that this simplified construction method may find general utility, both for de novo scFv library construction and for subsequent combinatorial affinity maturation manipulations that require more than two fragments.

Selection of Recombinant Human Antibodies

Since the development of therapeutic antibodies the demand of recombinant human antibodies is steadily increasing. Traditionally, therapeutic antibodies were generated by immunization of rat or mice, the generation of hybridoma clones, cloning of the antibody genes and subsequent humanization and engineering of the lead candidates. In the last few years, techniques were developed that use transgenic animals with a human antibody gene repertoire. Here, modern recombinant DNA technologies can be combined with well established immunization and hybridoma technologies to generate already affinity maturated human antibodies. An alternative are in vitro technologies which enabled the generation of fully human antibodies from antibody gene libraries that even exceed the human antibody repertoire. Specific antibodies can be isolated from these libraries in a very short time and therefore reduce the development time of an antibody drug at a very early stage.In this review, we describe different technologies that are currently used for the in vitro and in vivo generation of human antibodies.

Engineering of Immunoglobulin Fc Heterodimers Using Yeast Surface-Displayed Combinatorial Fc Library Screening

Immunoglobulin Fc heterodimers, which are useful scaffolds for the generation of bispecific antibodies, have been mostly generated through structure-based rational design methods that introduce asymmetric mutations into the CH3 homodimeric interface to favor heterodimeric Fc formation. Here, we report an approach to generate heterodimeric Fc variants through directed evolution combined with yeast surface display. We developed a combinatorial heterodimeric Fc library display system by mating two haploid yeast cell lines, one haploid cell line displayed an Fc chain library (displayed FcCH3A) with mutations in one CH3 domain (CH3A) on the yeast cell surface, and the other cell line secreted an Fc chain library (secreted FcCH3B) with mutations in the other CH3 domain (CH3B). In the mated cells, secreted FcCH3B is displayed on the cell surface through heterodimerization with the displayed FcCH3A, the detection of which enabled us to screen the library for heterodimeric Fc variants. We constructed combinatorial heterodimeric Fc libraries with simultaneous mutations in the homodimer-favoring electrostatic interaction pairs K370-E357/S364 or D399-K392/K409 at the CH3 domain interface. High-throughput screening of the libraries using flow cytometry yielded heterodimeric Fc variants with heterodimer-favoring CH3 domain interface mutation pairs, some of them showed high heterodimerization yields (~80-90%) with previously unidentified CH3 domain interface mutation pairs, such as hydrogen bonds and cation-π interactions. Our study provides a new approach for engineering Fc heterodimers that could be used to engineer other heterodimeric protein-protein interactions through directed evolution combined with yeast surface display.

A High Through-put Platform for Recombinant Antibodies to Folded Proteins

Antibodies are key reagents in biology and medicine, but commercial sources are rarely recombinant and thus do not provide a permanent and renewable resource. Here, we describe an industrialized platform to generate antigens and validated recombinant antibodies for 346 transcription factors (TFs) and 211 epigenetic antigens. We describe an optimized automated phage display and antigen expression pipeline that in aggregate produced about 3000 sequenced Fragment antigen-binding domain that had high affinity (typically EC₅₀<20 nm), high stability (T_m∼80 °C), good expression in E. coli (∼5 mg/L), and ability to bind antigen in complex cell lysates. We evaluated a subset of Fabs generated to homologous SCAN domains for binding specificities. These Fragment antigen-binding domains were monospecific to their target SCAN antigen except in rare cases where they cross-reacted with a few highly related antigens. Remarkably, immunofluorescence experiments in six cell lines for 270 of the TF antigens, each having multiple antibodies, show that ∼70% stain predominantly in the cytosol and ∼20% stain in the nucleus which reinforces the dominant role that translocation plays in TF biology. These cloned antibody reagents are being made available to the academic community through our web site recombinant-antibodies.org to allow a more system-wide analysis of TF and chromatin biology. We believe these platforms, infrastructure, and automated approaches will facilitate the next generation of renewable antibody reagents to the human proteome in the coming decade.

REAL-Select: full-length antibody display and library screening by surface capture on yeast cells

We describe a novel approach named REAL-Select for the non-covalent display of IgG-molecules on the surface of yeast cells for the purpose of antibody engineering and selection. It relies on the capture of secreted native full-length antibodies on the cell surface via binding to an externally immobilized ZZ domain, which tightly binds antibody Fc. It is beneficial for high-throughput screening of yeast-displayed IgG-libraries during antibody discovery and development. In a model experiment, antibody-displaying yeast cells were isolated from a 1∶1,000,000 mixture with control cells confirming the maintenance of genotype-phenotype linkage. Antibodies with improved binding characteristics were obtained by affinity maturation using REAL-Select, demonstrating the ability of this system to display antibodies in their native form and to detect subtle changes in affinity by flow cytometry. The biotinylation of the cell surface followed by functionalization with a streptavidin-ZZ fusion protein is an approach that is independent of the genetic background of the antibody-producing host and therefore can be expected to be compatible with other eukaryotic expression hosts such as P. pastoris or mammalian cells.

Double mutation of cell wall proteins CspB and PBP1a increases secretion of the antibody Fab fragment from Corynebacterium glutamicum

Background

Among other advantages, recombinant antibody-binding fragments (Fabs) hold great clinical and commercial potential, owing to their efficient tissue penetration compared to that of full-length IgGs. Although production of recombinant Fab using microbial expression systems has been reported, yields of active Fab have not been satisfactory. We recently developed the Corynebacterium glutamicum protein expression system (CORYNEX®) and demonstrated improved yield and purity for some applications, although the system has not been applied to Fab production.

Results

The Fab fragment of human anti-HER2 was successfully secreted by the CORYNEX® system using the conventional C. glutamicum strain YDK010, but the productivity was very low. To improve the secretion efficiency, we investigated the effects of deleting cell wall-related genes. Fab secretion was increased 5.2 times by deletion of pbp1a, encoding one of the penicillin-binding proteins (PBP1a), mediating cell wall peptidoglycan (PG) synthesis. However, this Δpbp1a mutation did not improve Fab secretion in the wild-type ATCC13869 strain. Because YDK010 carries a mutation in the cspB gene encoding a surface (S)-layer protein, we evaluated the effect of ΔcspB mutation on Fab secretion from ATCC13869. The Δpbp1a mutation showed a positive effect on Fab secretion only in combination with the ΔcspB mutation. The ΔcspBΔpbp1a double mutant showed much greater sensitivity to lysozyme than either single mutant or the wild-type strain, suggesting that these mutations reduced cell wall resistance to protein secretion.

Conclusion

There are at least two crucial permeability barriers to Fab secretion in the cell surface structure of C. glutamicum, the PG layer, and the S-layer. The ΔcspBΔpbp1a double mutant allows efficient Fab production using the CORYNEX® system.

Therapeutic antibody engineering by high efficiency cell screening

In recent years, several cell-based screening technologies for the isolation of antibodies with prescribed properties emerged. They rely on the multi-copy display of antibodies or antibody fragments on a cell surface in functional form followed by high through put screening and isolation of cell clones that carry an antibody variant with the desired affinity, specificity, and stability. Particularly yeast surface display in combination with high-throughput fluorescence-activated cell sorting has proven successful in the last fifteen years as a very powerful technology that has some advantages over classical generation of monoclonals using the hybridoma technology or bacteriophage-based antibody display and screening. Cell-based screening harbours the benefit of single-cell online and real-time analysis and characterisation of individual library candidates. Moreover, when using eukaryotic expression hosts, intrinsic quality control machineries for proper protein folding and stability exist that allow for co-selection of high-level expression and stability simultaneously to the binding functionality. Recently, promising technologies emerged that directly rely on antibody display on higher eukaryotic cell lines using lentiviral transfection or direct screening on B-cells. The combination of immunisation, B-cell screening and next generation sequencing may open new avenues for the isolation of therapeutic antibodies with prescribed physicochemical and functional characteristics.

Cells and cell lysates: a direct approach for engineering antibodies against membrane proteins using yeast surface display

Membrane proteins (MPs) are often desirable targets for antibody engineering. However, the majority of antibody engineering platforms depend implicitly on aqueous solubility of the target antigen which is often problematic for MPs. Recombinant, soluble forms of MPs have been successfully employed as antigen sources for antibody engineering, but heterologous expression and purification of soluble MP fragments remains a challenging and time-consuming process. Here we present a more direct approach to aid in the engineering of antibodies to MPs. By combining yeast surface display technology directly with whole cells or detergent-solubilized whole-cell lysates, antibody libraries can be screened against MP antigens in their near-native conformations. We also describe how the platform can be adapted for antibody characterization and antigen identification. This collection of compatible methods serves as a basis for antibody engineering against MPs and it is predicted that these methods will mature in parallel with developments in membrane protein biochemistry and solubilization technology.

Generation of diploid Pichia pastoris strains by mating and their application for recombinant protein production

Background

Yeast mating provides an efficient means for strain and library construction. However, biotechnological applications of mating in the methylotrophic yeast Pichia pastoris have been hampered because of concerns about strain stability of P. pastoris diploids. The aim of the study reported here is to investigate heterologous protein expression in diploid P. pastoris strains and to evaluate diploid strain stability using high cell density fermentation processes.

Results

By using a monoclonal antibody as a target protein, we demonstrate that recombinant protein production in both wild-type and glycoengineered P. pastoris diploids is stable and efficient during a nutrient rich shake flask cultivation. When diploid strains were cultivated under bioreactor conditions, sporulation was observed. Nevertheless, both wild-type and glycoengineered P. pastoris diploids showed robust productivity and secreted recombinant antibody of high quality. Specifically, the yeast culture maintained a diploid state for 240 h post-induction phase while protein titer and N-linked glycosylation profiles were comparable to that of a haploid strain expressing the same antibody. As an application of mating, we also constructed an antibody display library and used mating to generate novel full-length antibody sequences.

Conclusions

To the best of our knowledge, this study reports for the first time a comprehensive characterization of recombinant protein expression and fermentation using diploid P. pastoris strains. Data presented here support the use of mating for various applications including strain consolidation, variable-region glycosylation antibody display library, and process optimization.

Engineering antibodies by yeast display

Since its first application to antibody engineering 15 years ago, yeast display technology has been developed into a highly potent tool for both affinity maturing lead molecules and isolating novel antibodies and antibody-like species. Robust approaches to the creation of diversity, construction of yeast libraries, and library screening or selection have been elaborated, improving the quality of engineered molecules and certainty of success in an antibody engineering campaign and positioning yeast display as one of the premier antibody engineering technologies currently in use. Here, we summarize the history of antibody engineering by yeast surface display, approaches used in its application, and a number of examples highlighting the utility of this method for antibody engineering.

Selection of antibody fragments by yeast display

The critical need for renewable, high-quality affinity reagents in biological research, as well as for diagnostic and therapeutic applications, has required the development of new platforms of discovery. Yeast display is one of the main methods of in vitro display technology with phage display. Yeast display has been chosen by numerous groups to refine both affinity and specificity of antibodies because it enables fine discrimination between mutant clones of similar affinity. In addition, the construction of display libraries of antibody fragments in yeast permit to sample the immune antibody repertoire more fully than using phage. This chapter gives an updated overview of the available systems of yeast display platforms and libraries, followed up by technical descriptions of selection methods of antibody fragments by yeast display.