Metal−Organic Frameworks as Adsorbents for Trapping and Preconcentration of Organic Phosphonates

Adsorbents for hydrogen-bond accepting hazardous chemicals by post-synthetic modification of UiO-66-NH2

Adsorbents for hydrogen-bond accepting chemicals such as organophosphates are developed by post-synthetically modifying UiO-66-NH2 through two analogous condensation reactions to incorporate hydrogen-bond donating adsorbent groups. When benzaldehydes are employed as coupling partners, the resulting imine-functionalized MOFs show improvements in uptake capacity with increasingly electron-deficient adsorbent groups. By contrast, when the coupling partners are benzoic acids, the resulting amide-functionalized MOFs exhibit improvements in uptake capacity with increasingly electron-rich adsorbent groups. Both modification approaches also increase binding affinity for organophosphates relative to unmodified UiO-66-NH2, demonstrating successful modification of the MOF scaffold to create adsorbents for hazardous chemicals.

Metal-Organic Framework Gels for Adsorption and Catalytic Detoxification of Chemical Warfare Agents: A Review

Chemical warfare agents (CWAs) have brought great threats to human life and social stability, and it is critical to investigate protective materials. MOF (metal-organic framework) gels are a class with an extended MOF architecture that are mainly formed using metal-ligand coordination as an effective force to drive gelation, and these gels combine the unique characteristics of MOFs and organic gel materials. They have the advantages of a hierarchically porous structure, a large specific surface area, machinable block structures and rich metal active sites, which inherently meet the requirements for adsorption and catalytic detoxification of CWAs. A series of advances have been made in the adsorption and catalytic detoxification of MOF gels as chemical warfare agents; however, overall, they are still in their infancy. This review briefly introduces the latest advances in MOF gels, including pure MOF gels and MOF composite gels, and discusses the application of MOF gels in the adsorption and catalytic detoxification of CWAs. Meanwhile, the influence of microstructures (pore structures, metal active site, etc.) on the detoxification performance of protective materials is also discussed, which is of great significance in the exploration of high-efficiency protective materials. Finally, the review looks ahead to next priorities. Hopefully, this review can inspire more and more researchers to enrich the performance of MOF gels for applications in chemical protection and other purification and detoxification processes.

A promising sensing platform for explosive markers: Zeolite-like metal-organic framework based monolithic composite as a case study

Preconcentration for on-site detection or subsequent determination is a promising technique for selective sensing explosive markers at low concentrations. Here, we report divinylbenzene monolithic polymer in its blank form (neat-DVB) and as a composite incorporated with sodalite topology zeolite-like metal-organic frameworks (3-ZMOF@DVB), as a sensitive, selective, and cost-effective porous preconcentrator for aliphatic nitroalkanes in the vapor phase as explosive markers at infinite dilution. The developed materials were fabricated as 18 cm gas chromatography (GC) monolithic capillary columns to study their separation performance of nitroalkane mixture and the subsequent physicochemical study of adsorption using the inverse gas chromatography (IGC) technique. A strong preconcentration effect was indicated by a specific retention volume adsorption/desorption ratio equal to 3 for nitromethane on the neat-DVB monolith host-guest interaction, and a 14% higher ratio was observed using the 3-ZMOF@DVB monolithic composite despite the low percentage of 0.7 wt.% of sod-ZMOF added. Furthermore, Incorporating ZMOF resulted in a higher percentage of micropores, increasing the degree of freedom more than bringing stronger adsorption and entropic-driven interaction more than enthalpic. The specific free energy of adsorption (ΔGS) values increased for polar probes and nitroalkanes, denoting that adding ZMOFs earned the DVB monolithic matrix a more specific character. Afterward, Lewis acid-base properties were calculated, estimating the electron acceptor (KA) and electron donor (KB) constants. The neat-DVB was found to have a Lewis basic character with KB/KA = 7.71, and the 3-ZMOF@DVB had a less Lewis basic character with KB/KA = 3.82. An increased electron-accepting nature can be directly related to incorporating sod-ZMOF into the DVB monolithic matrix. This work considers the initial step in presenting a portable explosives detector or preconcentrating explosive markers trace prior to more sophisticated analysis. Additionally, the IGC technique allows for understanding the factors that led to the superior adsorption of nitroalkanes for the developed materials.

Spindle-like MIL101(Fe) decorated with Bi2O3 nanoparticles for enhanced degradation of chlortetracycline under visible-light irradiation

Improving the photocatalytic performance of metal-organic frameworks (MOFs) is an important way to expand its potential applications. In this work, zero-dimensional (0D) Bi₂O₃ nanoparticles were anchored to the surface of tridimensional (3D) MIL101(Fe) by a facile solvothermal method to obtain a novel 0D/3D heterojunction Bi₂O₃/MIL101(Fe) (BOM). The morphology and optical properties of the as-prepared Bi₂O₃/MIL101(Fe) composite were characterized. The photocatalytic activity of the synthesized samples was evaluated by degrading chlortetracycline (CTC) under visible-light irradiation. The obtained BOM-20 composite (20 wt % Bi₂O₃/MIL101(Fe)) exhibits the highest photocatalytic activity with CTC degradation efficiency of 88.2% within 120 min. The degradation rate constant of BOM-20 toward CTC is 0.01348 min^-1, which is 5.9 and 4.3 times higher than that of pristine Bi₂O₃ and MIL101(Fe), respectively. The enhanced photocatalytic activity is attributed to the formation of a Z-scheme heterojunction between Bi₂O₃ and MIL101(Fe), which is conducive to the rapid separation of photogenerated carriers and the enhancement of photogenerated electron and hole redox capacity. The intermediate products were analyzed by liquid chromatography-mass spectrometry (LC-MS), and a possible photocatalytic degradation path of CTC was proposed. This work provides a new perspective for the preparation of efficient MOF-based photocatalysts.

Observation of oxygen evolution over a {Ni12}-cluster-based metal-organic framework

The development of efficient electrocatalysts based on non-noble metals for oxygen evolution reaction (OER) remains an important and challenging task. Multinuclear transition-metal clusters with high structural stability are promising OER catalysts but their catalytic role is poorly understood. Here we report the crystallographic observation of OER activity over robust {Ni12}-clusters immobilised in a porous metal-organic framework, NKU-100, by single-crystal X-ray diffraction as a function of external applied potential. We observed the aggregation of confined oxygen species around the {Ni12}-cluster as a function of applied potential during the electrocatalytic process. The refined occupancy of these oxygen species shows a strong correlation with the variation of current density. This study demonstrates that the enrichment of oxygen species in the secondary co-ordination sphere of multinuclear transition-metal clusters can promote the OER activity.

Selective Detection of Volatile Organics in a Mixture Using a Photoionization Detector and Thermal Desorption from a Nanoporous Preconcentrator

The selective detection of individual hazardous volatile organic compounds (VOCs) within a mixture is of great importance in industrial contexts due to environmental and health concerns. Achieving this with inexpensive, portable detectors continues to be a significant challenge. Here, a novel thermal separator system coupled with a photoionization detector has been developed, and its ability to selectively detect the VOCs isopropanol and 1-octene from a mixture of the two has been studied. The system includes a nanoporous silica preconcentrator in conjunction with a commercially available photoionization detector (PID). The PID is a broadband total VOC sensor with little selectivity; however, when used in conjunction with our thermal desorption approach, selective VOC detection within a mixture can be achieved. VOCs are adsorbed in the nanoporous silica over a 5 min period at 5 °C before being desorbed by heating at a fixed rate to 70 °C and detected by the PID. Different VOCs desorb at different times/temperatures, and mathematical analysis of the set of PID responses over time enabled the contributions from isopropanol and 1-octene to be separated. The concentrations of each compound individually could be measured in a mixture with limits of detection less than 10 ppb_v and linearity errors less than 1%. Demonstration of a separation of a mixture of chemically similar compounds, benzene and o-xylene, is also provided.

Homochiral Metal-Organic Framework [Co(L)(bpe)2(H2O)2]·H2O Used for Separation of Racemates in High-Performance Liquid Chromatography

A homochiral metal-organic framework (MOF) comprising [Co(L)(bpe)2(H2O)2]·H2O was prepared using (1R,2R)-(-)-1,2-cyclohexanedicarboxylic acid (H2L) and 1,2-bis(4-pyridyl)-ethylene as organic ligands. The homochiral MOF [Co(L)(bpe)2(H2O)2]·H2O was explored as chiral stationary phase (CSP) for high-performance liquid chromatography (HPLC) separation of racemates. Nine racemates including naphthol, alcohol, diol, amine, ketone, ether and organic acid were well separated on the homochiral MOF [Co(L)(bpe)2(H2O)2]·H2O column (250 mm long × 4.6 mm i.d.). The relative standard deviation for five replicate separations of 1,1'-bi-2-naphthol is 0.69% for the retention time, indicating that the good reproducibility and stability of the homochiral MOF column for HPLC enantioseparation. The results indicated that the homochiral MOF as CSP is practical, which promotes the application of homochiral MOFs in HPLC.

Recent progress in environmental applications of metal-organic frameworks

Nanomaterials have aroused the interest of many researchers and become a research hotspot in recent years and metal-organic frameworks (MOFs) included in that are a class of new organic-inorganic hybrid porous materials formed through the self-assembly of organic ligands and inorganic metal ions. MOFs have been attracting increasing attention due to their structural diversification, large specific surface area, high porosity, inerratic pore space framework. These characteristics play their advantages in different fields and make some excellent achievements. This article summarizes the research progress of metal-organic framework in the field of environment especially the remarkable achievements in adsorption and provides a clear help for understanding the research progress and prospects for future research.

A new strategy for the adsorption and removal of fenitrothion from real samples by active-extruded MOF (AE-MOF UiO-66) as an adsorbent

The adsorption and removal of hazardous materials such as fenitrothion by adsorbents with high adsorption capacities and easy separation from sample solutions are highly desirable.

Cu-BTC Functional Microdevices as Smart Tools for Capture and Preconcentration of Nerve Agents

Cu-based metal-organic framework (MOF) microdevices are applied in sampling and preconcentration of nerve agents (NAs) diluted in gaseous streams. An in situ electrochemical-assisted synthesis of a Cu-benzene-1,3,5-tricarboxylate (BTC) thick film is carried out to functionalize a Cu-modified glass substrate. This simple, rapid, reproducible, and easy-to-integrate MOF synthesis approach enables the microfabrication of functional micro-preconcentrators with a large Brunauer-Emmett-Teller (BET) surface area (above 2000 cm²) and an active pore volume (above 90 nL) for the efficient adsorption of nerve agent molecules along the microfluidic channel 2.5 cm in length. The equilibrium adsorption capacity of the bulk material has been characterized through thermogravimetric analysis after exposure to controlled atmospheres of a sarin gas surrogate, dimethyl methylphosphonate (DMMP), in both dry and humid conditions (30% RH at 293 K). Breakthrough tests at the ppm level (162 mg/m³) reveal equilibrium adsorption capacities up to 691 mg/g. The preconcentration performance of such μ-devices when dealing with highly diluted surrogate atmosphere, i.e., 520 ppbV (2.6 mg/m³) at 298 K, leads to preconcentration coefficients up to 171 for sample volume up to 600 STP cm³. We demonstrate the potentialities of Cu-BTC micro-preconcentrators as smart first responder tools for "on-field" detection of nerve agents in the gas phase at relevant conditions.

Micro gas preconcentrator using metal organic framework embedded metal foam for detection of low-concentration volatile organic compounds

Analysis of volatile organic compounds (VOCs) is essential for on-site environmental monitoring and toxic chemicals detection. However, quantitatively detecting VOC gases is difficult because of their low gas concentration (<100 ppb), and preconcentration is necessary to overcome the detection limitations of various gas sensors. Many studies on micro preconcentrators (μ-PC) have been reported, however, these devices suffer from high desorption temperatures and significant pressure drops, which degrade sensing ability and increase operating costs, respectively. Due to these disadvantages, such devices are not yet commercially available. In this study, a μ-PC was developed using metal organic framework embedded metal foam (MOFM) as an adsorbent. The preconcentration performance of the μ-PC was evaluated based on several key parameters, such as desorption temperature, adsorption time, and initial sample concentration. In addition, the MOFM and commercial adsorbents were each packed in the same μ-PC chip, respectively, to compare their preconcentration and pressure drop performances. The MOFM-adsorbent-packed μ-PC demonstrated the preconcentration factors were 2.6 and 4 times higher, and the pressure drops were 4 and 3 times lower than those of the commercial adsorbents under the same conditions owing to the high specific surface area and the efficient flow distribution of the MOFM adsorbent.

Multifunctional Ag@MOF-5@chitosan non-woven cloth composites for sulfur mustard decontamination and hemostasis

Attachment of MOF-5 particles on the surface of carboxymethylated non-woven chitosan cloth (denoted MOF-5@chitosan) was achieved by a layer-by-layer technique in an alternating bath of Zn(OAc)2·2H2O and terephthalic acid solutions. Afterwards, silver nanoparticles were formed/loaded within the resulting MOF-5@chitosan by irradiating at 350 nm wavelength the composite immersed in an aqueous solution of silver nitrate of different concentrations, leading to the formation of ternary composites (denoted Ag@MOF-5@chitosan) which were thoroughly characterized by various techniques. Decontamination of HD over the composites was systematically studied and the results showed that decontamination efficacy increased with the increase of silver amount. The decontamination rate constant and half-life of HD were found to be 0.011 min-1 and 63.0 min over the optimal composite, respectively. Remarkably, attachment of the silver nanoparticles and MOF-5 on the chitosan cloth surface did not interfere with chitosan's original hemostatic capability that was confirmed through the arterial hemostasis of rats. It is expected that the multifunctional composite material can find practical applications in the fields of hemostasis, sterilization and chemical war agent decontamination.

Adsorption and Detection of Hazardous Trace Gases by Metal-Organic Frameworks

The quest for advanced designer adsorbents for air filtration and monitoring hazardous trace gases has recently been more and more driven by the need to ensure clean air in indoor, outdoor, and industrial environments. How to increase safety with regard to personal protection in the event of hazardous gas exposure is a critical question for an ever-growing population spending most of their lifetime indoors, but is also crucial for the chemical industry in order to protect future generations of employees from potential hazards. Metal-organic frameworks (MOFs) are already quite advanced and promising in terms of capacity and specific affinity to overcome limitations of current adsorbent materials for trace and toxic gas adsorption. Due to their advantageous features (e.g., high specific surface area, catalytic activity, tailorable pore sizes, structural diversity, and range of chemical and physical properties), MOFs offer a high potential as adsorbents for air filtration and monitoring of hazardous trace gases. Three advanced topics are considered here, in applying MOFs for selective adsorption: (i) toxic gas adsorption toward filtration for respiratory protection as well as indoor and cabin air, (ii) enrichment of hazardous gases using MOFs, and (iii) MOFs as sensors for toxic trace gases and explosives.

Metal-organic framework and Tenax-TA as optimal sorbent mixture for concurrent GC-MS analysis of C1 to C5 carbonyl compounds

We report a multi adsorbent-based method using combinations of metal-organic frameworks (MOFs) and a commercial sorbent Tenax-TA for sampling and thermal desorption (TD) gas chromatography-mass spectrometry (GC-MS) quantification of mixtures of six (C1 to C5) aldehydes. The feasibility of this approach was demonstrated along with the optical analytical conditions for maximum recovery. Optimal TD conditions for adsorption and desorption of aldehydes using MOF-5 (Zn-based MOF)+ Tenax-TA were determined as -25 °C and 150 °C, respectively (purge volume: 100 ml). These conditions yielded good linearity (R² = 0.997), precision, and high sensitivity. Analysis of the aldehyde mixtures yielded slightly smaller R² values than the analysis of single species. Additionally, the performance of MOF-5+ Tenax-TA was compared with other combinations comprising of Cu-based MOF-199 and Zr-based MOF of UiO-66 topology. The results of the theoretical modelling analyses propose simultaneous interaction of the C=O group of aldehydes with open metal sites of the studied MOFs and van der Waals interaction of hydrocarbon "tail" of aldehydes with linkers of MOFs. The combined interactions significantly increased the enthalpy (eV/molecule) of formaldehyde adsorption on MOF. Our findings unravel a potential way to extend the application of GC-based detection toward concurrent analysis of organic molecules of variable sizes.

Hybrid Photonic Cavity with Metal-Organic Framework Coatings for the Ultra-Sensitive Detection of Volatile Organic Compounds with High Immunity to Humidity

Detection of volatile organic compounds (VOCs) at parts-per-billion (ppb) level is one of the most challenging tasks for miniature gas sensors because of the high requirement on sensitivity and the possible interference from moisture. Herein, for the first time, we present a novel platform based on a hybrid photonic cavity with metal-organic framework (MOF) coatings for VOCs detection. We have fabricated a compact gas sensor with detection limitation ranging from 29 to 99 ppb for various VOCs including styrene, toluene, benzene, propylene and methanol. Compared to the photonic cavity without coating, the MOF-coated solution exhibits a sensitivity enhancement factor up to 1000. The present results have demonstrated great potential of MOF-coated photonic resonators in miniaturized gas sensing applications.

Layer-by-layer assembly of Cu3(BTC)2 on chitosan non-woven fabrics: a promising haemostatic decontaminant composite material against sulfur mustard

Anchoring Cu₃(BTC)₂ on the surface of chitosan non-woven fabrics results in formation of a new haemostatic decontaminant composite materials.

Separation/Preconcentration Techniques for Rare Earth Elements Analysis

The main aim of this chapter exactly characterizes the contribution. The analytical chemistry of the rare earth elements (REEs) very often is highly complicated and the determination of a specific element is impossible without a sample pre-concentration. Sample preparation can be carried out either by separation of the REEs from the matrix or by concentrating the REEs. The separation of REEs from each other is mainly made by chromatography.

At the beginning of REE analysis, the method of precipitation/coprecipitation was applied for the treatment of REE mixtures. The method is not applicable for the separation of trace amounts of REEs. The majority of the methods used are based on the distribution of REEs in a two-phase system, a liquid–liquid or a liquid–solid system. Various techniques have been developed for the liquid–liquid extraction (LLE), in particular the liquid phase micro-extraction. The extraction is always combined with a pre-concentration of the REEs in a single drop of extractant or in a hollow fiber filled with the extractant. Further modified techniques for special applications and for difficult REE separation have been developed. Compared to the LLE, the solid phase micro-extraction is preferred. The method is robust and easy to handle, in which the solid phase loaded with the REEs can be used directly for subsequent determination methods. At present, very new solid materials, like nanotubes, are developed and tested for solid phase extraction.

Towards metal-organic framework based field effect chemical sensors: UiO-66-NH2 for nerve agent detection

We present a highly sensitive gas detection approach for the infamous 'nerve agent' group of alkyl phosphonate compounds. Signal transduction is achieved by monitoring the work function shift of metal-organic framework UiO-66-NH2 coated electrodes upon exposure to ppb-level concentrations of a target simulant. Using the Kelvin probe technique, we demonstrate the potential of electrically insulating MOFs for integration in field effect devices such as ChemFETs: a three orders of magnitude improvement over previous work function-based detection of nerve agent simulants. Moreover, the signal is fully reversible both in dry and humid conditions, down to low ppb concentrations. Comprehensive investigation of the interactions that lead towards this high sensitivity points towards a series of confined interactions between the analyte and the pore interior of UiO-66-NH2.

Cationic Ionic Liquids Organic Ligands Based Metal-Organic Frameworks for Fabrication of Core-Shell Microspheres for Hydrophilic Interaction Liquid Chromatography

In this study, new metal-organic frameworks (MOFs) nanocrystals modified SiO2 core-shell microspheres were designed with cationic ionic liquids (ILs) 1,3-bis(4-carboxybutyl)imidazolium bromide (ILI) as organic ligands. By further adjustment the growth cycles, the new ILI-01@SiO2 core-shell stationary phase was facilely fabricated. The developed stationary phase was respectively characterized via element analysis, thermogravimetric analysis, scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectrometry. Because the introduction of cationic imidazolium-based ILs ILI for fabrication of the MOFs nanocrystals shell, the new stationary phase exhibits the retention mechanism of hydrophilic interaction liquid chromatography (HILIC). Many polar samples, such as amides, vitamins, nucleic acid bases, and nucleosides, were utilized to investigate the performance of the prepared ILI-01@SiO2 column. Compared to the conventional aminosilica column, the new ILI-01@SiO2 column displays high separation selectivity in a shorter separation time. Furthermore, the new ILI-01@SiO2 column was also used for detection of illegal melamine addition in the baby formula. All the above results demonstrate the new ILI-01@SiO2 core-shell stationary phase is of good potentials for high-selectivity separation the polar samples.

Covalent Bonding of Metal-Organic Framework-5/Graphene Oxide Hybrid Composite to Stainless Steel Fiber for Solid-Phase Microextraction of Triazole Fungicides from Fruit and Vegetable Samples

A hybrid material of the zinc-based metal-organic framework-5 and graphene oxide (metal-organic framework-5/graphene oxide) was prepared as a novel fiber coating material for solid-phase microextraction (SPME). The SPME fibers were fabricated by covalent bonding via chemical cross-linking between the coating material metal-organic framework-5/graphene oxide and stainless steel wire. The prepared fiber was used for the extraction of five triazole fungicides from fruit and vegetable samples. Gas chromatography coupled with microelectron capture detector (GC-μECD) was used for quantification. The developed method gave a low limit of detection (0.05-1.58 ng g(-1)) and good linearity (0.17-100 ng g(-1)) for the determination of the triazole fungicides in fruit and vegetable samples. The relative standard deviations (RSDs) for five replicate extractions of the triazole fungicides ranged from 3.7 to 8.9%. The method recoveries for spiked fungicides (5, 20, and 50 ng g(-1)) in grape, apple, cucumber, celery cabbage, pear, cabbage, and tomato samples were in the range of 85.6-105.8% with the RSDs ranging from 3.6 to 11.4%, respectively, depending on both the analytes and samples. The metal-organic framework-5/graphene oxide coated fiber was stable enough for 120 extraction cycles without a significant loss of extraction efficiency. The method was suitable for the determination of triazole fungicides in fruit and vegetable samples.

Controlled stepwise-synthesis of core-shell Au@MIL-100 (Fe) nanoparticles for sensitive surface-enhanced Raman scattering detection

A novel porous Au@MIL-100 (Fe) core-shell structure in which a Au nanoparticle (AuNP) core is coated with a controllable uniform metal-organic framework shell has been fabricated by using a facile step-by-step procedure. The as-synthesized Au@MIL-100 (Fe) takes advantage of the high adsorption capability of the MIL-100 (Fe) shell and the localized surface plasmon resonance properties of the AuNP core, and was used as a hybrid surface enhanced Raman scattering (SERS) substrate. We discussed the fabrication, physical characterization, and SERS activity of our novel substrate, and found that this new substrate had controllable shell thickness, high stability and good SERS activity. The potential practical application of the novel SERS substrate was firstly evaluated by quantitative analysis of malachite green in aquaculture water. The method showed good linearity between 3.0 × 10(-8)-1.0 × 10(-6) mol L(-1) for malachite green with a correlation coefficient of 0.9945. The limit of detection (LOD) was 8.0 × 10(-9) mol L(-1). Then the applicability of Au@MIL-100 (Fe) as the SERS substrate for in situ detection of malachite green on the fish body indicated its great potential as a rapid and on-site detection analytical strategy. In addition, the preliminary investigation also shows that the Au@MIL-100 (Fe) has SERS activity toward carbon disulfide which would be a new strategy for SERS-based gas sensors.

Magnetic nanoporous hybrid carbon from core–shell metal–organic frameworks for glycan extraction

Magnetic nanoporous carbon (NPC) materials, which can be thoroughly separated from an aqueous solution easily, are very promising adsorbents.

Synthesis of a metal-organic framework confined in periodic mesoporous silica with enhanced hydrostability as a novel fiber coating for solid-phase microextraction

A metal-organic framework/periodic mesoporous silica (MOF-5@SBA-15) hybrid material has been prepared by using SBA-15 as a matrix. The prepared MOF-5@SBA-15 hybrid material was then deposited on a stainless-steel wire to obtain the fiber for the solid-phase microextraction of phenolic compounds. Modifications in the metal-organic framework structure have proven to improve the extraction performance of MOF/SBA-15 hybrid materials, compared to pure MOF-5 and SBA-15. Optimum conditions include an extraction temperature of 75°C, a desorption temperature of 260°C, and a salt concentration of 20% w/v. The dynamic linear range and limit of detection range from 0.1-500 and from 0.01-3.12 ng/mL, respectively. The repeatability for one fiber (n = 3), expressed as relative standard deviation, is between 4.3 and 9.6%. The method offers the advantage of being simple to use, rapid, and low cost, the thermal stability of the fiber, and high relative recovery (compared to conventional methods) represent additional attractive features.

Organic building block based microporous network SNW-1 coating fabricated by multilayer interbridging strategy for efficient enrichment of trace volatiles

Microporous organic polymers (MOPs) are an emerging class of functional porous materials for diverse potential applications. Typically, tailored microporous structures of MOPs are generated by linkages of organic polymerizable monomer building blocks, providing high permanent porosity and excellent stability. Herein, we reported the first example of the application of organic building block based MOPs (OBB-MOPs) as efficient enrichment media for sample preparation. A novel multilayer interbridging strategy was proposed to fabricate OBB-MOP coatings, and hereby SNW-1 (a kind of OBB-MOPs) was coated on silica substrate with well-controlled thickness. Strong covalent bonds throughout the network and interlayer bridging improved the durability of the coating significantly. Outstanding chemical stability was observed in diverse solvents as well as solutions with a wide range of pH or high ionic strength and even under extremely harsh conditions like boiling water. The SNW-1 coating possessed a microporous network structure constructed of conjugated and nitrogen-rich building blocks. Thus, the coating exhibited a superior enrichment performance of polycyclic aromatic hydrocarbons and volatile fatty acids (VFAs) over commercial coatings based on interactions including π-π affinity and acid-base interaction. For further application, this coating was combined with gas chromatography/mass spectrometry for the noninvasive analysis of VFAs from tea leaf and tobacco shred samples. The low detection limits of 0.014-0.026 μg/L were achieved with the relative standard deviations (RSDs) between 4.3 and 9.0%. Consequently, trace original VFAs from the samples were detected. Good recoveries were obtained in the range of 90-129% and 77-118% with the corresponding RSDs (n = 3) of 2.6-9.3% and 1.9-10%, respectively.

Reverse-phase high performance liquid chromatography separation of positional isomers on a MIL-53(Fe) packed column

The application of the metal–organic framework (MOF) MIL-53(Fe) as a novel stationary phase for reverse-phase high performance liquid chromatography (HPLC) separation of positional isomers is described for the first time.

Fast multipoint immobilized MOF bioreactor

An enzyme-NBD@MOF bioreactor with exemplary proteolytic performance, even after successive reuse and storage, was produced through a novel, rapid and simple multipoint immobilization technique without chemical modification of the solid support. Enzyme loading and distribution could be directly monitored from the fluorescence emission of the bioreactor. The dye molecular dimension plays a role in its overall performance.

Fabrication of gold nanoparticle-embedded metal-organic framework for highly sensitive surface-enhanced Raman scattering detection

Surface-enhanced Raman scattering (SERS) signals strongly rely on the interactions and distance between analyte molecules and metallic nanostructures. In this work, the use of a gold nanoparticle (AuNP)-embedded metal-organic framework was introduced for the highly sensitive SERS detection. The AuNPs were in situ grown and encapsulated within the host matrix of MIL-101 by a solution impregnation strategy. The as-synthesized AuNPs/MIL-101 nanocomposites combined the localized surface plasmon resonance properties of the gold nanoparticles and the high adsorption capability of metal-organic framework, making them highly sensitive SERS substrates by effectively preconcentrating analytes in close proximity to the electromagnetic fields at the SERS-active metal surface. We discussed the fabrication, physical characterization, and SERS activity of our novel substrates by measuring the Raman signals of a variety of model analytes. The SERS substrate was found to be highly sensitive, robust, and amiable to several different target analytes. A SERS detection limit of 41.75 and 0.54 fmol for Rhodamine 6G and benzadine, respectively, was demonstrated. The substrate also showed high stability and reproducibility, as well as molecular sieving effect thanks to the protective shell of the metal-organic framework. Subsequently, the potential practical application of the novel SERS substrate was evaluated by quantitative analysis of organic pollutant p-phenylenediamine in environmental water and tumor marker alpha-fetoprotein in human serum. The method showed good linearity between 1.0 and 100.0 ng/mL for p-phenylenediamine and 1.0-130.0 ng/mL for alpha-fetoprotein with the correlation coefficients of 0.9950 and -0.9938, respectively. The recoveries ranged from 80.5% to 114.7% for p-phenylenediamine in environmental water and 79.3% to 107.3% for alpha-fetoprotein in human serum. These results foresee promising application of the novel metal-organic framework based composites as sensitive SERS-active substrates in both environmental and clinical samples.