Defect Sites in Ultrathin Pd Nanowires Facilitate the Highly Efficient Electrochemical Hydrodechlorination of Pollutants by H*ads

Support electron inductive effect of Pd-Mn/Ni foam catalyst for robust electrocatalytic hydrodechlorination

Structural regulation of Pd-based electrocatalytic hydrodechlorination (EHDC) catalyst for constructing high-efficient cathode materials with low noble metal content and high atom utilization is crucial but still challenging. Herein, a support electron inductive effect of Pd-Mn/Ni foam catalyst was proposed via in-situ Mn doping to optimize the electronic structure of the Ni foam (NF), which can inductive regulation of Pd for improving the EHDC performance. The mass activity and current efficiency of Pd-Mn/NF catalyst are 2.91 and 1.34 times superior to that of Pd/NF with 2,4-dichlorophenol as model compound, respectively. The Mn-doped interlayer optimized the electronic structure of Pd by bringing the d-state closer to the Fermi level than Pd on the NF surface, which optimizied the binding of EHDC intermediates. Additionally, the Mn-doped interlayer acted as a promoter for generating H* and accelerating the EHDC reaction. This work presents a simple and effective regulation strategy for constructing high-efficient cathode catalyst for the EHDC of chlorinated organic compounds.

Electrochemical removal of nitrate in high-salt wastewater with low-cost iron electrode modified by phosphate

Nitrate (NO3-) is a widespread pollutant in high-salt wastewater and causes serious harm to human health. Although electrochemical removal of nitrate has been demonstrated to be a promising treatment method, the development of low-cost electro-catalysts is still challenging. In this work, a phosphate modified iron (P-Fe) cathode was prepared for electrochemical removal of nitrate in high-salt wastewater. The phosphate modification greatly improved the activity of iron, and the removal rate of nitrate on P-Fe was three times higher than that on Fe electrode. Further experiments and density functional theory (DFT) calculations demonstrated that the modification of phosphoric acid improved the stability and the activity of the zero-valent iron electrode effectively for NO3- removal. The nitrate was firstly electrochemically reduced to ammonium, and then reacted with the anodic generated hypochlorite to N2. In this study, a strategy was developed to improve the activity and stability of metal electrode for NO3- removal, which opened up a new field for the efficient reduction of NO3- removal by metal electrode materials.

Hierarchically porous and flexible chitin-fiber/melamine-sponge composite filter with high-loading of PdAu nanoparticles for effective hydrodechlorination of chlorophenols

Hydrodechlorination has emerged as a promising technique for detoxifying chlorophenols (CPs) in wastewater, but it suffers from sluggish reaction kinetics and limited durability due to the lack of effective and stable catalysts. Herein, a composite filter consisting of melamine-sponge (MS), chitin fiber (CF) and ultrafine PdAu nanoparticles (PdAu/CF-MS) has been designed for continuous hydrodechlorination of CPs by using formic acid as a H-donor and sodium formate as a promoter. Benefitting from the dense active sites, rich porosity, and synergetic interaction of Pd/Au, the PdAu/CF-MS filter exhibits excellent hydrodechlorination performance (∼ 100 % conversion) towards 4-chlorophenol (1 mM, fluxes below 6100 mL·h-1·g-1) and outstanding durability (over 500 h at 61 mL·h-1·g-1), surpassing most reported counterparts (usually deactivated within 200 h or several cycles). Moreover, other CPs can also be effectively dechlorinated by the PdAu/CF-MS filter. The catalytic system proposed herein will provide a promising candidate for the detoxification of wastewater containing toxic CPs.

Cooperative amplification of Prussian blue as a signal indicator and functionalized metal-organic framework-based electrochemical biosensor for an ultrasensitive HE4 assay

Human epididymis protein 4 (HE4), a diagnostic biomarker of ovarian cancer, is crucial for monitoring the early stage of the disease. Hence, it is highly important to develop simple, inexpensive, and user-friendly biosensors for sensitive and quantitative HE4 assays. Herein, a new sandwich-type electrochemical immunosensor based on Prussian blue (PB) as a signal indicator and functionalized metal-organic framework nanocompositesas efficient signal amplifiers was fabricated for quantitative analysis of HE4. In principle, ketjen black (KB) and AuNPs modified on TiMOF (TiMOF-KB@AuNPs) could accelerate electron transfer on the electrode surface and act as a matrix for the immobilization of antibodies via cross-linking to improve the determination sensitivity. The PB that covalently binds to labeled antibodies endows the biosensors with intense electrochemical signals. Furthermore, the concentration of HE4 could be indirectly detected by monitoring the electroactivity of PB. Benefiting from the high signal amplification ability of the PB and MOF nanocomposites, this strategy displayed a wide linear range (0.1-80 ng mL-1) and a lower detection limit (0.02 ng mL-1). Hence, this study demonstrated great promise for application in clinical ovarian cancer diagnosis and treatment, and provided a new platform for detecting other cancer biomarkers.

Bibliometric analysis and systematic review of electrochemical methods for environmental remediation

Electrochemical methods are increasingly favored for remediating polluted environments due to their environmental compatibility and reagent-saving features. However, a comprehensive understanding of recent progress, mechanisms, and trends in these methods is currently lacking. Web of Science (WoS) databases were utilized for searching the primary data to understand the knowledge structure and research trends of publications on electrochemical methods and to unveil certain hotspots and future trends of electrochemical methods research. The original data were sampled from 9080 publications in those databases with the search deadline of June 1st, 2022. CiteSpace and VOSviewer software facilitated data visualization and analysis of document quantities, source journals, institutions, authors, and keywords. We discussed principles, influencing factors, and progress related to seven major electrochemical methods. Notably, publications on this subject have experienced significant growth since 2007. The most frequently-investigated areas in electrochemical methods included novel materials development, heavy metal remediation, organic pollutant degradation, and removal mechanism identification. "Advanced oxidation process" and "Nanocomposite" are currently trending topics. The major remediation mechanisms are adsorption, oxidation, and reduction. The efficiency of electrochemical systems is influenced by material properties, system configuration, electron transfer efficiency, and power density. Electro-Fenton exhibits significant advantages in achieving synergistic effects of anodic oxidation and electro-adsorption among the seven techniques. Future research should prioritize the improvement of electron transfer efficiency, the optimization of electrode materials, the exploration of emerging technology coupling, and the reduction in system operation and maintenance costs.

Neighboring Catalytic Sites Are Essential for Electrochemical Dechlorination of 2-Chlorophenol

The electrocatalytic reduction process is a promising technology for decomposing chlorinated organic pollutants in water but is limited by the lack of low-cost catalysts that can achieve high activity and selectivity. In studying electrochemical dechlorination of 2-chlorophenol (2-CP) in aqueous media, we find that cobalt phthalocyanine molecules supported on carbon nanotubes (CoPc/CNT), which is a highly effective electrocatalyst for breaking the aliphatic C-Cl bonds in 1,2-dichloroethane (DCA) and trichloroethylene (TCE), are completely inactive for reducing the aromatic C-Cl bond in 2-CP. Detailed mechanistic investigation, including volcano plot correlation between dechlorination rate and atomic hydrogen adsorption energy on various transition metal surfaces, kinetic measurements, in situ Raman spectroscopy, and density functional theory calculations, reveals that the reduction of the aromatic C-Cl bond in 2-CP goes through a hydrodechlorination mechanism featuring a bimolecular reaction between adsorbed atomic hydrogen and 2-CP on the catalyst surface, which requires neighboring catalytic sites, whereas the aliphatic C-Cl bonds in DCA and TCE are cleaved by direct electron transfer from the catalyst, which can occur on isolated single sites. This investigation leads to the discovery of metallic Co as a highly selective and active electrocatalyst for 2-CP dechlorination. This work provides new insights into the fundamental chemistry and catalyst design of electrochemical dechlorination reactions for wastewater treatment.

A Wetting and Capture Strategy Overcoming Electrostatic Repulsion for Electroreduction of Nitrate to Ammonia from Low-Concentration Sewage

Ammonia production by electrocatalytic nitrate reduction reaction (NO3RR) in water streams is anticipated as a zero-carbon route. Limited by dilute nitrate in natural sewage and the electrostatic repulsion between NO3 - and cathode, NO3RR can hardly be achieved energy-efficiently. The hydrophilic Cu@CuCoO2 nano-island dispersed on support can enrich NO3 - and produce a sensitive current response, followed by electrosynthesis of ammonia through atomic hydrogen (*H) is reported. The accumulated NO3 - can be partially converted to NO2 - without external electric field input, confirming that the Cu@CuCoO2 nano-island can strongly bind NO3 - and then trigger the reduction via dynamic evolution between Cu-Co redox sites. Through the identification of intermediates and theoretical computation. it is found that the N-side hydrogenation of *NO is the optimal reaction step, and the formation of N─N dimer may be prevented. An NH3 product selectivity of 93.5%, a nitrate conversion of 96.1%, and an energy consumption of 0.079 kWh gNH3 -1 is obtained in 48.9 mg-N L-1 naturally nitrate-polluted streams, which outperforms many works using such dilute nitrate influent. Conclusively, the electrocatalytic system provides a platform to guarantee the self-sufficiency of dispersed ammonia production in agricultural regions.

Effects of Ionic Interferents on Electrocatalytic Nitrate Reduction: Mechanistic Insight

Nitrate, a prevalent water pollutant, poses substantial public health concerns and environmental risks. Electrochemical reduction of nitrate (eNO3RR) has emerged as an effective alternative to conventional biological treatments. While extensive lab work has focused on designing efficient electrocatalysts, implementation of eNO3RR in practical wastewater settings requires careful consideration of the effects of various constituents in real wastewater. In this critical review, we examine the interference of ionic species commonly encountered in electrocatalytic systems and universally present in wastewater, such as halogen ions, alkali metal cations, and other divalent/trivalent ions (Ca2+, Mg2+, HCO3-/CO32-, SO42-, and PO43-). Notably, we categorize and discuss the interfering mechanisms into four groups: (1) loss of active catalytic sites caused by competitive adsorption and precipitation, (2) electrostatic interactions in the electric double layer (EDL), including ion pairs and the shielding effect, (3) effects on the selectivity of N intermediates and final products (N2 or NH3), and (4) complications by the hydrogen evolution reaction (HER) and localized pH on the cathode surface. Finally, we summarize the competition among different mechanisms and propose future directions for a deeper mechanistic understanding of ionic impacts on eNO3RR.

Utilizing an Integrated Flow Cathode-Membrane Filtration System for Effective and Continuous Electrochemical Hydrodechlorination

Pd-based electrodes are recognized to facilitate effective electrochemical hydrodechlorination (EHDC) as a result of their superior capacity for atomic hydrogen (H*) generation. However, challenges such as electrode stability, feasibility of treating complex matrices, and high cost associated with electrode synthesis hinder the application of Pd-based electrodes for EHDC. In this work, we investigated the feasibility of degrading 2,4-dichlorophenol (2,4-DCP) by EHDC employing Pd-loaded activated carbon particles, prepared via a simple wet-impregnation method, as a flow cathode (FC) suspension. Compared to other Pd-based EHDC studies, a much lower Pd loading (0.02-0.08 mg cm-2) was used. Because of the excellent mass transfer in the FC system, almost 100% 2,4-DCP was hydrodechlorinated to phenol within 1 h. The FC system also showed excellent performance in treating complex water matrices (including hardness ion-containing wastewater and various other chlorinated organics such as 2,4-dichlorobenzoic acid and trichloroacetic acid) with a relatively low energy consumption (0.26-1.56 kW h m-3 mg-1 of 2,4-DCP compared to 0.32-7.61 kW h m-3 mg-1 of 2,4-DCP reported by other studies). The FC synthesized here was stable over 36 h of continuous operation, indicating its potential suitability for real-world applications. Employing experimental investigations and mathematical modeling, we further show that hydrodechlorination of 2,4-DCP occurs via interaction with H*, with no role of direct electron transfer and/or HO•-mediated processes in the removal of 2,4-DCP.

Pulsed electro-catalysis enables effective conversion of low-concentration nitrate to ammonia over Cu2O@Pd tandem catalyst

Electro-catalytic conversion of nitrate (NO3-) to ammonia (NH3) via the Nitrate Reduction to Ammonia (NORA) process represents a promising strategy for both ammonia synthesis and environmental remediation. Despite its potential, the efficiency of low-concentration NORA is often hindered by mass transfer limitations, competing byproducts (N2 and NO2-), and side reactions such as hydrogen evolution. This study introduces a novel pulsed electro-synthesis technique that alternates the potential to periodically accumulate and transform NO2- intermediates near a Cu2O@Pd electrode, enhancing the NORA process. Compared with that under potentiostatic conditions, the Cu2O@Pd electrodes exhibited a higher NORA activity under the optimized pulsed condition, where a NH3-N Faradaic efficiency (FE) of 81.2%, a yield rate of 1.08 mg h-1 cm-2 and a selectivity efficiency (SE) of 81.5%, were achieved. In-situ characterization revealed an enhancement mechanism characterized by optimized adsorption of the key *NO intermediate, followed by the hydrogenation path "*N → *NH → *NH2→ *NH3". Further investigations indicated the electro-catalytic synergies between Pd sites and Cu species, where the Pd atoms were the reaction sites for the H adsorption while the Cu species were responsible for the NO3- activation. This research offers a novel insight into a method of enhancing low-concentration NORA.

Single-Atom Iron Can Steer Atomic Hydrogen toward Selective Reductive Dechlorination: Implications for Remediation of Chlorinated Solvents-Impacted Groundwater

Atomic hydrogen (H*) is a powerful and versatile reductant and has tremendous potential in the degradation of oxidized pollutants (e.g., chlorinated solvents). However, its application for groundwater remediation is hindered by the scavenging side reaction of H2 evolution. Herein, we report that a composite material (Fe0@Fe-N4-C), consisting of zerovalent iron (Fe0) nanoparticles and nitrogen-coordinated single-atom Fe (Fe-N4), can effectively steer H* toward reductive dechlorination of trichloroethylene (TCE), a common groundwater contaminant and primary risk driver at many hazardous waste sites. The Fe-N4 structure strengthens the bond between surface Fe atoms and H*, inhibiting H2 evolution. Nonetheless, H* is available for dechlorination, as the adsorption of TCE weakens this bond. Interestingly, H* also enhances electron delocalization and transfer between adsorbed TCE and surface Fe atoms, increasing the reactivity of adsorbed TCE with H*. Consequently, Fe0@Fe-N4-C exhibits high electron selectivity (up to 86%) toward dechlorination, as well as a high TCE degradation kinetic constant. This material is resilient against water matrix interferences, achieving long-lasting performance for effective TCE removal. These findings shed light on the utilization of H* for the in situ remediation of groundwater contaminated with chlorinated solvents, by rational design of earth-abundant metal-based single-atom catalysts.

Copper-based electro-catalytic nitrate reduction to ammonia from water: Mechanism, preparation, and research directions

Global water bodies are increasingly imperiled by nitrate pollution, primarily originating from industrial waste, agricultural runoffs, and urban sewage. This escalating environmental crisis challenges traditional water treatment paradigms and necessitates innovative solutions. Electro-catalysis, especially utilizing copper-based catalysts, known for their efficiency, cost-effectiveness, and eco-friendliness, offer a promising avenue for the electro-catalytic reduction of nitrate to ammonia. In this review, we systematically consolidate current research on diverse copper-based catalysts, including pure Cu, Cu alloys, oxides, single-atom entities, and composites. Furthermore, we assess their catalytic performance, operational mechanisms, and future research directions to find effective, long-term solutions to water purification and ammonia synthesis. Electro-catalysis technology shows the potential in mitigating nitrate pollution and has strategic importance in sustainable environmental management. As to the application, challenges regarding complexity of the real water, the scale-up of the commerical catalysts, and the efficient collection of produced NH3 are still exist. Following reseraches of catalyst specially on long term stability and in situ mechanisms are proposed.

A sequencing electroreduction-electrooxidation system driven by atomic hydrogen for enhancing 2,4-dichloronitrobenzene removal from wastewater

The sequencing electroreduction-electrooxidation process has emerged as a promising approach for the degradation of the chloronitrobenzenes (CNBs) due to its elimination of electro-withdrawing groups in the reduction process, facilitating further removal in the subsequent oxidation process. Herein, we developed a cathode consisting of atom Pd on a Ti plate, which enabled the electro-generation of atomic hydrogen (H*) and the efficient electrocatalytic activation of H2O2 to hydroxyl radical (•OH). Cyclic voltammetry (CV) curves and electron spin resonance (ESR) spectra verified the existence of H* and •OH. The electroreduction-electrooxidation system achieved 94.7% of 20 mg L-1 2,4-DCNB removal with a relatively low H2O2 addition (5 mM). Moreover, the inhibition rate of Photobacterium phosphoreum in the effluent decreased from 95% to 52% after the sequencing electroreduction-electrooxidation processes. It was further revealed that the H* dominated the electroreduction process and triggered the electrooxidation process. Our work sheds light on the effective removal of electron-withdrawing groups substituted aromatic contaminants from water and wastewater.

Zeolitic imidazolate framework derived Fe catalyst electrocatalytic-driven atomic hydrogen for efficient reduction of nitrate to N2

Excessive discharge of nitrogen-containing chemical products into the natural water environment leads to the serious environmental problem of nitrate-nitrogen pollution, threatening the ecological balance and human health. In this study, we propose an efficient denitrification electrochemical method utilizing iron-doped zeolite imidazolium framework derived defective nitrogen-doped carbon (d-FeNC) catalysts. The d-FeNC catalyst exhibited 97 % nitrate removal efficiency and 94 % total nitrogen (TN) removal, and the reaction rate constant was increased from 0.73 h-1 of the Fe-undoped electrocatalyst (d-NC) to 1.11 h-1. The successful synthesis of d-FeNC with carbon defect sites and encapsulated Fe was confirmed by in-depth characterization. In situ electron paramagnetic resonance (EPR) analysis in conjunction with cyclic voltammetry (CV) tests confirmed the carbon substrates with defect enhanced the trapping of atomic hydrogen (H*) on the catalyst surface. Density functional theory (DFT) calculations clarified the doping of Fe facilitated the adsorption of nitrate, resulting in contact of H* with nitrate on the catalyst surface. In the synergy of the defective state organic framework and metal Fe, H* and nitrate realized a collision process. The electrochemical denitrification system achieved an excellent nitrate removal capacity of 7587 mgN·g-1cat in high-concentration nitrate solution and showed excellent stability under various conditions. Overall, this study underscores the potential of defective iron-doped carbon catalysts for efficient electrocatalytic denitrification, providing a promising approach for sustainable wastewater treatment.

Monoethanolamine enhanced iohexol degradation in the Co(II)/sulfite system: Nonnegligible role of complexation in accelerating cobalt redox cycling

Generation of sulfate radicals (SO4•-) from sulfite activation has emerged as a promising method for abatement of organic pollutants in the water and wastewater treatment. Co(II) has garnered attention due to its high catalytic activity in the sulfite activation, which is compromised by the slow Co(II)/Co(III) redox cycling. Regarding the regulation of Co(II) electronic structure via the complexation effect, monoethanolamine (MEA), a common chelator, is introduced into the Co(II)/sulfite system. MEA addition results in a significant improvement in iohexol abatement efficiency, increasing from 40% to 92%. The superior iohexol abatement relies on the involvement of SO4•-, hydroxyl radicals (HO•) and Co(IV). Hydrogen radical (•H) is unexpectedly detected, acting as a strong reducing agent, contributing to the reduction of Co(III). This enhancement of sulfite activation by MEA is due to the formation of the Co(II)-MEA complex, in which the complexation ratio of Co(II) and MEA is critical. Electrochemical characterization and theoretical calculations demonstrate that the complexation can facilitate the Co(II)/Co(III) redox cycling with the concomitant enhancement of sulfite activation. This work provides a new insight into the Co(II)/sulfite system in the presence of organic ligands.

Keto-anthraquinone covalent organic framework for H2O2 photosynthesis with oxygen and alkaline water

Hydrogen peroxide photosynthesis suffers from insufficient catalytic activity due to the high energy barrier of hydrogen extraction from H2O. Herein, we report that mechanochemically synthesized keto-form anthraquinone covalent organic framework which is able to directly synthesize H2O2 (4784 μmol h-1 g-1 at λ > 400 nm) from oxygen and alkaline water (pH = 13) in the absence of any sacrificial reagents. The strong alkalinity resulted in the formation of OH-(H2O)n clusters in water, which were adsorbed on keto moieties within the framework and then dissociated into O2 and active hydrogen, because the energy barrier of hydrogen extraction was largely lowered. The produced hydrogen reacted with anthraquinone to generate anthrahydroquinone, which was subsequently oxidized by O2 to produce H2O2. This study ultimately sheds light on the importance of hydrogen extraction from H2O for H2O2 photosynthesis and demonstrates that H2O2 synthesis is achievable under alkaline conditions.

Critical Review of Pd-Catalyzed Reduction Process for Treatment of Waterborne Pollutants

Catalyzed reduction processes have been recognized as important and supplementary technologies for water treatment, with the specific aims of resource recovery, enhancement of bio/chemical-treatability of persistent organic pollutants, and safe handling of oxygenate ions. Palladium (Pd) has been widely used as a catalyst/electrocatalyst in these reduction processes. However, due to the limited reserves and high cost of Pd, it is essential to gain a better understanding of the Pd-catalyzed decontamination process to design affordable and sustainable Pd catalysts. This review provides a systematic summary of recent advances in understanding Pd-catalyzed reductive decontamination processes and designing Pd-based nanocatalysts for the reductive treatment of water-borne pollutants, with special focus on the interactions and transformation mechanisms of pollutant molecules on Pd catalysts at the atomic scale. The discussion begins by examining the adsorption of pollutants onto Pd sites from a thermodynamic viewpoint. This is followed by an explanation of the molecular-level reaction mechanism, demonstrating how electron-donors participate in the reductive transformation of pollutants. Next, the influence of the Pd reactive site structure on catalytic performance is explored. Additionally, the process of Pd-catalyzed reduction in facilitating the oxidation of pollutants is briefly discussed. The longevity of Pd catalysts, a crucial factor in determining their practicality, is also examined. Finally, we argue for increased attention to mechanism study, as well as precise construction of Pd sites under batch synthesis conditions, and the use of Pd-based catalysts/electrocatalysts in the treatment of concentrated pollutants to facilitate resource recovery.

Electron-rich palladium regulated by cationic vacancies in CoFe layered double hydroxide boosts electrocatalytic hydrodechlorination

Palladium (Pd) is regarded as a promising electrocatalytic hydrodechlorination (EHDC) catalyst for the detoxification of halogenated phenols. Nevertheless, its intrinsic EHDC activity is seriously restricted by the hydrogen evolution reaction (HER), consuming the active hydrogen (H*) for EHDC. Here, we report a defect regulation strategy using cationic vacancies rich CoFeV-LDH with coupling ultrafine Pd nanoparticles that induces optimized electron distribution of Pd to promote EHDC. The experimental and theoretical results reveal that superior EHDC performance of Pd@CoFeV-LDH is attributed to the electron-rich Pd regulated by cationic vacancies in CoFeV-LDH support, driving facile adsorption of halogenated phenols, high water activation ability and H* selectivity for EHDC. Our findings provide a versatile defect-regulating strategy to overcome the challenge in efficiency and selectivity of EHDC process.

Electrocatalytic Deep Dehalogenation and Mineralization of Florfenicol: Synergy of Atomic Hydrogen Reduction and Hydroxyl Radical Oxidation over Bifunctional Cathode Catalyst

It is difficult to achieve deep dehalogenation or mineralization for halogenated antibiotics using traditional reduction or oxidation processes, posing the risk of microbial activity inhibition and bacterial resistance. Herein, an efficient electrocatalytic process coupling atomic hydrogen (H*) reduction with hydroxyl radical (•OH) oxidation on a bifunctional cathode catalyst is developed for the deep dehalogenation and mineralization of florfenicol (FLO). Atomically dispersed NiFe bimetallic catalyst on nitrogen-doped carbon as a bifunctional cathode catalyst can simultaneously generate H* and •OH through H2O/H+ reduction and O2 reduction, respectively. The H* performs nucleophilic hydro-dehalogenation, and the •OH performs electrophilic oxidization of the carbon skeleton. The experimental results and theoretical calculations indicate that reductive dehalogenation and oxidative mineralization processes can promote each other mutually, showing an effect of 1 + 1 > 2. 100% removal, 100% dechlorination, 70.8% defluorination, and 65.1% total organic carbon removal for FLO are achieved within 20 min (C0 = 20 mg·L-1, -0.5 V vs SCE, pH 7). The relative abundance of the FLO resistance gene can be significantly reduced in the subsequent biodegradation system. This study demonstrates that the synergy of reduction dehalogenation and oxidation degradation can achieve the deep removal of refractory halogenated organic contaminants.

Water Flow-Driven Coupling Process of Anodic Oxygen Evolution and Cathodic Oxygen Activation for Water Decontamination and Prevention of Chlorinated Byproducts

Electrochemical advanced oxidation process (EAOP) is a promising technology for decentralized water decontamination but is subject to parasitic anodic oxygen evolution and formation of toxic chlorinated byproducts in the presence of Cl-. To address this issue, we developed a novel electrolytic process by water flow-driven coupling of anodic oxygen evolution reaction (OER) and cathodic molecular oxygen activation (MOA). When water flows from anode to cathode, O2 produced from OER is carried by water through convection, followed by being activated by atomic hydrogen (H*) on Pd cathode to produce •OH. The water flow-driven OER/MOA process enables the anode to be polarized at low potential (1.7 V vs SHE) that is lower than that of conventional EAOP whose •OH is produced from direct water oxidation (>2.3 V vs SHE). At a flow rate of 30 mL min-1, the process could achieve 94.8% removal of 2,4-dichlorophenol (2,4-DCP) and 71.5% removal of chemical oxygen demand (COD) within 45 min at an anode potential of 1.7 V vs SHE and cathode potential of -0.5 V vs SHE. To achieve the comparable 2,4-DCP removal performance, 4.3-fold higher energy consumption was needed for the conventional EAOP with titanium suboxide anode (anode potential of 2.9 V vs SHE), but current efficiency declined by 3.5 folds. Unlike conventional EAOP, chlorate and perchlorate were not detected in the OER/MOA process, because low anode potential <2.0 V vs SHE was thermodynamically unfavorable for the formation of chlorinated byproducts by anodic oxidation, indicated by theoretical calculations and experimental data. This study provides a proof-in-concept demonstration of water flow-driven OER/MOA process, representing a paradigm shift of electrochemical technology for water decontamination and prevention of chlorinated byproducts, making electrochemical water decontamination more efficient, more economic, and more sustainable.

Tailoring Ag Electron Donating Ability for Organohalide Reduction: A Bilayer Electrode Design

Electrochemical reduction of organohalides provides a green approach in the reduction of environmental pollutants, the synthesis of new organic molecules, and many other applications. The presence of a catalytic electrode can make the process more energetically efficient. Ag is known to be a very good electrode for the reduction of a wide range of organohalides. Herein, we examine the elementary adsorption and reaction steps that occur on Ag and the changes that result from changes in the Ag-coated metal, strain in Ag, solvent, and substrate geometry. The results are used to develop an electrode design strategy that can possibly be used to further increase the catalytic activity of pure Ag electrodes. We have shown how epitaxially depositing one to three layers of Ag on catalytically inert or less active support metal can increase the surface electron donating ability, thus increasing the adsorption of organic halide and the catalytic activity. Many factors, such as molecular geometry, lattice mismatches, work function, and solvents, contribute to the adsorption of organic halide molecules over the bilayer electrode surface. To isolate and rank these factors, we examined three model organic halides, namely, halothane, bromobenzene (BrBz), and benzyl bromide (BzBr) adsorption on Ag/metal (metal = Au, Bi, Pt, and Ti) bilayer electrodes in both vacuum and acetonitrile (ACN) solvent. The different metal supports offer a range of lattice mismatches and work function differences with Ag. Our calculations show that the surface of Ag becomes more electron donating and accessible to adsorption when it forms a bilayer with Ti as it has a lower work function and almost zero lattice mismatch with Ag. We believe this study will help to increase the electron donating ability of the Ag surface by choosing the right metal support, which in turn can improve the catalytic activity of the working electrode.

Highly efficient atomic hydrogen-mediated electrochemical hydrodehalogenation of trichloroacetic acid on 3D hierarchical multi-transition metal selenides

Halogenated organic compounds as highly focused emerging contaminants pose a long-lasting threat to human health and the aquatic environment due to their high toxicities and strong anti-biodegradation characteristics. Electrochemical hydrodehalogenation (ECHD) is a promising technology with a low-carbon footprint to remove halogenated organic compounds while suffering from a lack of efficient and robust earth-abundant electrocatalysts. Herein, by integrating two kinds of transition metal dichalcogenides (i.e., MoSe2 nanosheet and Ni3Se2 nanowire) into a conductive 3D porous network nickel foam, we obtained a hierarchical architecture (MoSe2/Ni3Se2@NF) that promises high surface area, fast charge transfer and efficient mass transfer. The interface-confined epitaxial growth of Ni3Se2 nanowires on nickel foam provides abundant sites for the vertical growth of MoSe2 nanosheets, which endows MoSe2 with maximal accessible active edge sites to participate in the ECHD process. Benefiting from such a hierarchical 3D porous configuration, trichloroacetic acid (5 mg/L) was removed over 95% by MoSe2/Ni3Se2@NF at - 1.2 V vs. SCE after 1 h, which dramatically outperformed that for NF (20%) and Ni3Se2@NF (53.2%). The major contributor to such boosted performance is the adsorbed atomic hydrogen (*H) generated during water splitting via suppressing hydrogen-hydrogen dimerization, as evidenced by radical quenching experiments and electron paramagnetic resonance spectroscopy. This study offers appealing opportunities for tailoring the catalytic performance of noble-metal-free heterogeneous catalysts for various applications that require noble-metal catalysts.

Electrocatalytic hydro-dehalogenation of halogenated organic pollutants from wastewater: A critical review

Halogenated organic pollutants are often found in wastewater effluent although it has been usually treated by advanced oxidation processes. Atomic hydrogen (H*)-mediated electrocatalytic dehalogenation, with an outperformed performance for breaking the strong carbon-halogen bonds, is of increasing significance for the efficient removal of halogenated organic compounds from water and wastewater. This review consolidates the recent advances in the electrocatalytic hydro-dehalogenation of toxic halogenated organic pollutants from contaminated water. The effect of the molecular structure (e.g., the number and type of halogens, electron-donating or electron-withdrawing groups) on dehalogenation reactivity is firstly predicted, revealing the nucleophilic properties of the existing halogenated organic pollutants. The specific contribution of the direct electron transfer and atomic hydrogen (H*)-mediated indirect electron transfer to dehalogenation efficiency has been established, aiming to better understand the dehalogenation mechanisms. The analyses of entropy and enthalpy illustrate that low pH has a lower energy barrier than that of high pH, facilitating the transformation from proton to H*. Furthermore, the quantitative relationship between dehalogenation efficiency and energy consumption shows an exponential increase of energy consumption for dehalogenation efficiency increasing from 90% to 100%. Lastly, challenges and perspectives are discussed for efficient dehalogenation and practical applications.

Regulating the reaction pathway of nZVI to improve the decontamination performance through magnetic spatial confinement effect

Nanoscale zero-valent iron (nZVI) shows high effectiveness in the catalyzed removal of contaminants in wastewater treatment. However, the uncontrolled interfacial electron transfer behavior and formation of surface iron oxide (FeOx) layer led to severe electron wasting and occasionally form highly toxic intermediates. Here, we constructed magnetic mesoporous SiO₂ shell on surface of nZVI to stimulate a magnetic spatial confinement effect and regulate the electron transfer pattern. Therein, Fe atom facilely spread out from the nZVI core, orderly release electron to surface adsorbed H₂O molecule, which is efficiently transformed into active hydrogen (H*). Meanwhile, in-situ Raman revealed that Fe atoms were involved in the formation of penetrable γ-FeOOH rather than FeOx layer, enabling the continuous inward diffusion of H₂O and outward diffusion of H* . Employing the catalyzed removal of halogenated phenols as demo reaction, the presence of magnetic mesoporous SiO₂ shell utilized the reaction between electrons and H₂O to switch the reaction pathway from the reduction/oxidation hybrid process to hydrodehalogantion, and increased the conversion of halogenated phenols-to-phenols by 5.53 times. This study shows the forehand of improving the decontamination performance of nZVI through sophisticated designed surface coating, as well as fine regulating the environmental behavior of magnetic material via micro-magnetic field.

Promoting Effect of Nitride as Support for Pd Hydrodechlorination Catalyst

Pd-catalyzed reductive decontamination is considerably promising in the safe handling of various pollutants, and previous studies on heterogeneous Pd catalysts have demonstrated the key role of support in determining their catalysis performance. In this work, metal nitrides were studied as supports for Pd as a hydrodechlorination (HDC) catalyst. Density functional theory study showed that a transition metal nitride (TMN) support could effectively modulate the valence-band state of Pd. The upward shift of the d-band center reduced the energy barrier for water desorption from the Pd site to accommodate H₂/4-chlorophenol and increased the total energy released during HDC. The theoretical results were experimentally verified by synthesizing Pd catalysts onto different metal oxides and the corresponding nitrides. All studied TMNs, including TiN, Mo₂N, and CoN, showed satisfactorily stabilized Pd and render Pd with high dispersity. In line with theoretical prediction, TiN most effectively modulated the electronic states of the Pd sites and enhanced their HDC performance, with mass activity much higher than those of counterpart catalysts on other supports. The combined theoretical and experimental results shows that TMNs, especially TiN, are new and potentially important support for the highly efficient Pd HDC catalysts.

Single-Atom Catalysts for Hydrogen Activation

Selective hydrogenation is one of the most important reactions in fine chemical industry, and the activation of H₂ is the key step for hydrogenation. Catalysts play a critical role in selective hydrogenation, and some single-atom catalysts (SACs) are highly capable of activating H₂ in selective hydrogenation by virtue of the maximized atom utilization and the highly uniform active sites. Therefore, more research efforts are needed for the rational design of SACs with superior H₂ -activating capabilities. Herein, the research progress on H₂ activation in typical hydrogenation systems (such as alkyne hydrogenation, hydroformylation, hydrodechlorination, hydrodeoxygenation, nitroaromatics hydrogenation, and polycyclic aromatics hydrogenation) is reviewed, the mechanisms of SACs for H₂ activation are summarized, and the structural regulation strategies for SACs are proposed to promote H₂ activation and provide schemes for the design of high-selectivity hydrogenation catalysts from the atomic scale. At the end of this review, an outlook on the opportunities and challenges for SACs to be developed for selective hydrogenation is presented.

In Situ Reconstruction of Metal Oxide Cathodes for Ammonium Generation from High-Strength Nitrate Wastewater: Elucidating the Role of the Substrate in the Performance of Co3O4-x

In situ electrochemical reconstruction is important for transition metal oxides explored as electrocatalysts for electrochemical nitrate reduction reactions (ENRRs). Herein, we report substantial performance enhancement of ammonium generation on Co, Fe, Ni, Cu, Ti, and W oxide-based cathodes upon reconstruction. Among them, the performance of a freestanding ER-Co₃O_4-x/CF (Co₃O₄ grown on Co foil subjected to electrochemical reduction) cathode was superior to its unreconstructed counterpart and other cathodes; e.g., an ammonium yield of 0.46 mmol h^-1 cm^-2, an ammonium selectivity of 100%, and a Faradaic efficiency of 99.9% were attained at -1.3 V in a 1400 mg L^-1 NO₃^--N solution. The reconstruction behaviors were found to vary with the underlying substrate. The inert carbon cloth only acted as a supporting matrix for immobilizing Co₃O₄, without appreciable electronic interactions between them. A combination of physicochemical characterizations and theoretical modeling provided compelling evidence that the CF-promoted self-reconstruction of Co₃O₄ induced the evolution of metallic Co and the creation of oxygen vacancies, which promoted and optimized interfacial nitrate adsorption and water dissociation, thus boosting the ENRR performance. The ER-Co₃O_4-x/CF cathode performed well over wide ranges of pH and applied current and at high nitrate loadings, ensuring its high efficacy in treating high-strength real wastewater.

Atomic H*-mediated electrochemical removal of low concentration antimonite and recovery of antimony from water

Compounds containing antimony (Sb) are broadly used as starting materials for a wide range of industrial products, leading to serious water pollution associated with Sb rock mining as well as Sb leaching. Herein, we proposed an innovative design of an electrified membrane consisted of bimetallic palladium and iron nanoparticles (Pd-Fe NPs) supported on conductive carbon nanotube (CNT) networks. The nanohybrid filter enabled effective generation and retainment of atomic hydrogen (H*) under an electric field, which further contributed to the complete electroreduction of antimonite (Sb(III)). The highest atomic H* yield and Sb(III) removal kinetics were identified once a potential of -1.0 V vs. Ag/AgCl was exerted. Compared to the pristine CNT, Pd-CNT and Fe-CNT filters, the reaction rate constant of the Pd/Fe-CNT filter was increased 5.15-, 2.39-, and 1.76-fold, respectively for electrochemical removal of Sb(III). The results denoted that the superior performance of the Pd/Fe-CNT nanohybrid filter originated from: (1) the flow-through design, which enhanced mass transport, (2) the bimetallic design, which increased the catalytic activity, and (3) the collective contribution from atomic H*-mediated indirect reduction and direct electron transfer reduction mechanisms. The robust system performance occurred over a broad range of pH values, a variety of water matrices and can withstand several cycles of experiments. Our findings highlight an effective electro-filtration strategy to induce atomic H*-mediated electrochemical removal and recovery of Sb from water.

Defective Metal Oxides: Lessons from CO2 RR and Applications in NOx RR

Sluggish reaction kinetics and the undesired side reactions (hydrogen evolution reaction and self-reduction) are the main bottlenecks of electrochemical conversion reactions, such as the carbon dioxide and nitrate reduction reactions (CO₂ RR and NO₃ RR). To date, conventional strategies to overcome these challenges involve electronic structure modification and modulation of the charge-transfer behavior. Nonetheless, key aspects of surface modification, focused on boosting the intrinsic activity of active sites on the catalyst surface, are yet to be fully understood. Engingeering of oxygen vacancies (OVs) can tune surface/bulk electronic structure and improve surface active sites of electrocatalysts. The continuous breakthroughs and significant progress in the last decade position engineering of OVs as a potential technique for advancing electrocatalysis. Motivated by this, the state-of-the-art findings of the roles of OVs in both the CO₂ RR and the NO₃ RR are presented. The review starts with a description of approaches to constructing and techniques for characterizing OVs. This is followed by an overview of the mechanistic understanding of the CO₂ RR and a detailed discussion on the roles of OVs in the CO₂ RR. Then, insights into the NO₃ RR mechanism and the potential of OVs on NO₃ RR based on early findings are highlighted. Finally, the challenges in designing CO₂ RR/NO₃ RR electrocatalysts and perspectives in studying OV engineering are provided.

Enhancing Electrocatalytic Hydrodechlorination through Interfacial Microenvironment Modulation

Electrochemical reduction (ER) is a promising approach to safely remove pollutants. However, sluggish reaction kinetics and significant side reactions considerably limit the applicability of this green process. Herein, we uncovered the previously ignored role of interfacial hydrophilicity in determining the ER performance through electron microscopy observations, contact angle (CA) analysis, and electrochemical measurements. A Pd/C electrocatalyst forms dense nanopores on the electrode surface, rendering it highly hydrophobic and achieving a CA of up to 145°. This imposes a large mass-transfer barrier for the diffusion of water and pollutants into Pd sites. Moreover, the release of H2 is suppressed, which changes the solid-liquid (Pd-polluted water) interface into a solid-gas (H2)-liquid interface. This further slows down mass transfer and the decontamination process. This dilemma can be easily alleviated by adding hydrophilic polymers like polyethylene glycol to increase hydrophilicity and improve mass transfer. By this way, the activity and Faraday efficiency of Pd/C in the electrochemical hydrodehalogenation of 2,4-dichlorophenol could be increased by 4-5 times. Moreover, this interfacial microenvironment modulation strategy is parallel to other approaches, such as Pd structural engineering, and therefore these strategies can be combined to further increase the electrochemical decontamination performance of electrocatalysts.

Ampere-level current density ammonia electrochemical synthesis using CuCo nanosheets simulating nitrite reductase bifunctional nature

The development of electrocatalysts capable of efficient reduction of nitrate (NO₃^-) to ammonia (NH₃) is drawing increasing interest for the sake of low carbon emission and environmental protection. Herein, we present a CuCo bimetallic catalyst able to imitate the bifunctional nature of copper-type nitrite reductase, which could easily remove NO₂^- via the collaboration of two active centers. Indeed, Co acts as an electron/proton donating center, while Cu facilitates NO_x^- adsorption/association. The bio-inspired CuCo nanosheet electrocatalyst delivers a 100 ± 1% Faradaic efficiency at an ampere-level current density of 1035 mA cm^-2 at -0.2 V vs. Reversible Hydrogen Electrode. The NH₃ production rate reaches a high activity of 4.8 mmol cm^-2 h^-1 (960 mmol g_cat^-1 h^-1). A mechanistic study, using electrochemical in situ Fourier transform infrared spectroscopy and shell-isolated nanoparticle enhanced Raman spectroscopy, reveals a strong synergy between Cu and Co, with Co sites promoting the hydrogenation of NO₃^- to NH₃ via adsorbed *H species. The well-modulated coverage of adsorbed *H and *NO₃ led simultaneously to high NH₃ selectivity and yield.

Harnessing Nickel Phthalocyanine-Based Electrochemical CNT Sponges for Ammonia Synthesis from Nitrate in Contaminated Water

Electrochemical reduction of nitrate to ammonia is of great interest in water treatment with regard to the conversion of contaminants to value-added products, which requires the development of advanced electrodes to achieve high selectivity, stability, and Faradaic efficiency (FE). Herein, nickel phthalocyanine was homogeneously doped into the fiber of a carbon nanotube (CNT) sponge, enabling the production of an electrode with high electrochemical double-layer capacitance (C_DL) and a large electrochemically active surface area (ECSA). The as-prepared NiPc-CNT sponge could achieve 97.6% nitrate removal, 88.4% ammonia selectivity, and 86.8% FE at a nitrate concentration of 50 mg-N L^-1 under an optimized potential of -1.2 V (vs Ag/AgCl). Meanwhile, the ammonia selectivity could be further improved at the high nitrate concentration. Density functional theory calculations showed that the exposure of Ni-N₄ active sites could effectively suppress the hydrogen evolution reaction and dinitrogen generation, enhancing the ammonia selectivity and Faradaic efficiency. Overall, this work sheds light on the conversion of nitrate to ammonia on the metal phthalocyanine-based electrode, offering a novel strategy for managing nitrate in wastewater.

Electrocatalytic Hydrogenation Boosts Reduction of Nitrate to Ammonia over Single-Atom Cu with Cu(I)-N3C1 Sites

The conversion of nitrate to ammonia can serve two important functions: mitigating nitrate pollution and offering a low energy intensity pathway for ammonia synthesis. Conventional ammonia synthesis from electrocatalytic nitrate reduction reactions (NO₃RR) is often impeded by incomplete nitrate conversion, sluggish kinetics, and the competition of hydrogen evolution reactions. Herein, atomic Cu sites anchored on micro-/mesoporous nitrogen-doped carbon (Cu MNC) with fine-tuned hydrophilicity, micro-/mesoporous channels, and abundant Cu(I) sites were synthesized for selective nitrate reduction to ammonia, achieving ambient temperature and pressure hydrogenation of nitrate. Laboratory experiments demonstrated that the catalyst has an ammonia yield rate per active site of 5466 mmol g_Cu^-1 h^-1 and transformed 94.8% nitrate in wastewater containing 100 mg-N L^-1 to near drinking water standard (MCL of 5 mg-N L^-1) at -0.64 V vs RHE. Extended X-ray absorption fine structure (EXAFS) and theoretical calculations showed that the coordination environment of Cu(I) sites (Cu(I)-N₃C₁) localizes the charge around the central Cu atoms and adsorbs *NO₃ and *H onto neighboring Cu and C sites with balanced adsorption energy. The Cu(I)-N₃C₁ moieties reduce the activation energy of rate-limiting steps (*HNO₃ → *NO₂, *NH₂ → *NH₃) compared with conventional Cu(II)-N₄ and lead to a thermodynamically favorable process to NH₃. The as-prepared electrocatalytic cell can run continuously for 84 h (14 cycles) and produce 21.7 mg_NH3 with only 5.64 × 10^-3 kWh energy consumption, suitable for decentralized nitrate removal and ammonia synthesis from nitrate-containing wastewater.

Carbon vacancies enriched carbon nitride nanotubes for Pd coordination environment optimization: Highly efficient photocatalytic hydrodechlorination and CO2 cycloaddition

The use of easily available solar energy to achieve pollutants efficient degradation and waste carbon resource CO₂ utilization under mild conditions is highly desired. Herein, novel carbon vacancies enriched nanotubes graphitic carbon nitride (SCNT-500) has been successfully fabricated via melamine (MA) supramolecular hydrogen-bonded self-assembly in the presence of H₂SO₄. Pd NPs loaded carbon vacancies enriched carbon nitride nanotubes (Pd/SCNT-500) were used for photocatalytic chlorophenols hydrodechlorination and CO₂ cycloaddition with styrene oxide. Up to 6.93 s^-1 4-chlorophenol hydrodechlorination TOF and obviously improved CO₂ cycloaddition efficiency could be realized with Pd/SCNT-500. The improved photocatalytic efficiency should be related to the morphology and carbon vacancies based Pd coordination environment optimization. Such as, the surface area increased nanotubes structure promoted light harvesting along with photoelectrons and holes generation; the carbon vacancies improved excited electrons capture, photoinduced carriers recombination inhibition along with substrates adsorption with electron rich Pd NPs. Mechanism studies not only demonstrated the important role of atomic hydrogen and Pd coordination environment optimization in the chlorophenols hydrodechlorination, but also confirmed the promotion ability of photogenerated electrons on CO₂ cycloaddition.

Synergistic effect of atomically dispersed Fe-Ni pair sites for electrocatalytic reactions to remove chlorinated organic compounds

Electrocatalysis is a promising and environmentally friendly technology for the removal of refractory organics. Diatomic catalysts with an increased number of active sites have emerged with further expansion of the field of atomic catalysts. Here, a metal diatomic FeNi supported graphene (FeNi/N-rGO) catalyst is successfully synthesized. The atomically dispersed Fe and Ni species on graphene is verified by aberration-corrected high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure spectroscopy. The pollutant degradation efficiencies for the cathode and anode are found to reach 97.6% and 95.8%, respectively, within 90 min in the diatomic catalytic system. According to DFT theoretical calculations, FeNi diatomic catalysts have a lower free energy (ΔG = -0.2 eV), and the higher adsorption energy for the active substance H* is -0.412 eV. This work presents a method for the preparation of high-performance diatomic catalysts and promotes their application in the electrochemical degradation of chlorinated organic pollutants.

A highly active copper-nanoparticle-based nitrate reduction electrocatalyst prepared by in situ electrodeposition and annealing

In recent years, copper-based electrodes have attracted intense attention for the electrochemical reduction of nitrate (NO₃^-), the so-called ECRN. However, these electrodes suffer from low activity and selectivity. Herein, we report a novel Cu-based electrode (IE-Cu-400) for the ECRN fabricated by loading Cu-based nanoparticles onto graphite felt using in situ electrodeposition followed by annealing. Compared with traditional Cu-based electrodes, the IE-Cu-400 is comprised of smaller particles and the copper is present in a high oxidation state (Cu²⁺ in CuO). During operation, the CuO is converted to Cu, which is the active ECRN species. In addition, an increased surface area and high density of grain boundaries resulting from the reduction of CuO were observed for IE-Cu-400. This resulted in a 3.38-fold increase in the NO₃^- removal rate and a 1.36-fold increase in NH₄⁺ selectivity. Further analyses revealed that the enhanced ECRN performance of IE-Cu-400 is linked to its increased number of active sites, as well as its improved adsorption and reduction ability for NO₂^-. Moreover, IE-Cu-400 displays high stability for the ECRN. Finally, the produced NH₄⁺ was effectively oxidised to N₂ with approximately 100% selectivity via chlorination. Hence, the two-stage treatment strategy (i.e. ECRN by IE-Cu-400 + chlorination treatment) presented here shows great potential for the complete electrocatalytic denitrification of water. Further, this work highlights the beneficial effect of decreasing the particle size and controlling the surface oxidation of Cu-based catalysts simultaneously for enhancing the ECRN and offers new suggestions for the design of high-performance electrode materials for the ECRN.

Direct Electron Transfer Coordinated by Oxygen Vacancies Boosts Selective Nitrate Reduction to N2 on a Co-CuOx Electroactive Filter

Atomic hydrogen (H*) is used as an important mediator for electrochemical nitrate reduction; however, the Faradaic efficiency (FE) and selective reduction to N₂ are likely compromised due to the side reactions (e.g., ammonia generation and hydrogen evolution reactions). This work reports a Co-CuO_x electrochemical filter with CoO_x nanoclusters rooted on vertically aligned CuO_x nanowalls for selective nitrate reduction to N₂, utilizing the direct electron transfer between oxygen vacancies and nitrate to suppress the contribution by H*. At a cathodic potential of -1.1 V (vs Ag/AgCl), the Co-CuO_x filter showed 95.2% nitrate removal and 96.0% N₂ selectivity at an influent nitrate concentration of 20 N-mg L^-1. Meanwhile, the energy consumption and FE were 0.60 kW h m^-3 and 53.5%, respectively, at a permeate flux of 60 L m^-2 h^-1. The presence of abundant oxygen vacancies on Co-CuO_x was due to the change in the electron density of the Cu atom and a decrease of the coordination numbers of Cu-O via cobalt doping. Theoretical calculations and electrochemical tests showed that the oxygen vacancies coordinated nitrate adsorption and subsequent reduction reactions, thus suppressing the contribution of H* to nitrate reduction and leading to a thermodynamically favorable process to N₂ via direct electron transfer.

Hydroxyl Radical Production via a Reaction of Electrochemically Generated Hydrogen Peroxide and Atomic Hydrogen: An Effective Process for Contaminant Oxidation?

An electrochemical advanced oxidation process (EAOP) is demonstrated with a catalytic cathode capable of simultaneously catalyzing the hydrogen evolution reaction (HER) and the oxygen reduction reaction (ORR) with resultant in situ generation of atomic hydrogen (H*) and hydrogen peroxide (H₂O₂). A palladium-coated carbon-PTFE gas diffusion electrode (Pd/C GDE) was used as a catalytic cathode with hydroxyl radical (^•OH) formed as a result of the reaction of electrogenerated H* with H₂O₂. As both the HER and ORR can be induced to occur at the same cathode, the H*/GDE process results in more effective degradation of organic contaminants than can be achieved by a conventional H*/H₂O₂ process involving direct addition of H₂O₂. At circumneutral pH, 82.7% of added formate was degraded after 2 h treatment at an applied potential of -1.0 V vs Ag/AgCl with relatively low concentrations of generated H₂O₂ remaining in the solution. We also show that H* and H₂O₂ (and thus ^•OH) can be electrogenerated effectively over a wide range of pH (3.2-7.0). These results suggest that by in situ generation of H* and H₂O₂, the H*/GDE process is able to produce significant amounts of ^•OH without external chemical addition and thus offers an alternative method for abatement of aqueous organic contaminants.

Incorporating Oxygen Atoms in a SnS2 Atomic Layer to Simultaneously Stabilize Atomic Hydrogen and Accelerate the Generation of Hydroxyl Radicals for Water Decontamination

Photoelectrocatalysis (PEC) is an efficient way to address various pollutants. Surface-adsorbed atomic hydrogen (H*) and hydroxyl radicals (•OH) play a key role in the PEC process. However, the instability of H* and low production of •OH considerably limit the PEC efficiency. In this study, we noted that incorporating oxygen atoms could regulate the behavior of H* by creating a locally favorable electron-rich state of S atoms in the SnS₂ catalyst. The finely modulated H* led to a 12-fold decrease in the overpotential of H₂O₂ generation (H*-OOH*-H₂O₂-•OH) by decreasing the activation energy barrier of OOH* (rate-determining step). Considering density functional theory calculations, an H*-•OH redox pair suitable for a wide pH range (3-11) was successfully constructed based on the photocathode. The optimal SnS_1.85O_0.15 AL@TNA photocathode exhibited a ∼90% reduction in Cr(VI) in 10 min and ∼70% TOC removal of 4-nitrophenol, nearly 2- and 3-fold higher than that without oxygen incorporation. Electron spin resonance spectrometry and radical quenching experiments verified that H* and the derived •OH via 1-electron and 3-electron reduction were the main active species. Operando Raman spectroscopy confirmed that the stable SnO₂ phase helped constantly activate the production of H* and •OH.

Conductive-polymer-supported palladium-iron bimetallic nanocatalyst for simultaneous 4-chlorophenol and Cr(VI) removal: Enhanced interfacial electron transfer and mechanism

Nanoscale zerovalent iron (nZVI) reduction offers a wide range of applications in source-zone remediation, but the reactivity of nZVI is largely hampered due to its low electron-transfer ability and tendency to aggregate. Based on the dual function of conductive polymers (CPs) as support and electron transfer carrier, we combined CPs with nZVI and prepared a series of Pd/Fe bimetallic materials that successfully address the challenges of nZVI reduction. These Pd/Fe@CPs particles showed strong catalytic ability for the simultaneous removal of 4-chlorophenol (4-CP) and Cr(VI). The removal rate of 4-CP was significantly enhanced by 1.5-6.2 times after supporting Pd/Fe nanoparticles (NPs) with CPs. The enhanced reactivity of supported Pd/Fe NPs was attributed to their highly stabilized and dispersed state and the promoted electron transfer due to the synergistic effect between CPs and nZVI bimetallic particles. The various catalytic activity over Pd/Fe@CPs was attributed to the distinctive properties of CPs and their different interfacial electron transfer ability. Importantly, this study provides insights into distinguishing both mechanisms of direct electron transfer and atomic-hydrogen-mediated indirect electron transfer, and their quantitative relationship to the dehalogenation performance over Pd/Fe@CPs materials. This work provides better understanding of the remediation process and mechanisms of nZVI reduction.

High activity of step sites on Pd nanocatalysts in electrocatalytic dechlorination

The role of step sites on nanocatalysts in the electrocatalytic dechlorination reaction (ECDR) was studied using 3 Pd nanocatalysts with different densities of step sites, which decreased in the order of: tetrahexahedral Pd{310} nanocrystals (THH Pd{310} NCs) > commercial Pd nanoparticles (Pd black) > cubic Pd{100} NCs. The two well-defined Pd NCs served as model catalysts and were prepared through the electrochemical square-wave potential (SWP) method. The toxic herbicide alachlor was first employed in this study as an objective probe to determine the dechlorination performance, which was quantified by the alachlor removal (R_ala), the current efficiency (CE_ala), and the dechlorination selectivity (S_des). The experimental results demonstrated that the THH Pd{310} NCs with abundant step sites exhibited much higher electrocatalytic performance compared to the cubic Pd{100} NCs with terrace sites. The combination of cyclic voltammetry studies, electrochemical in situ FTIR analysis, and density functional theory (DFT) calculations revealed that the adsorbed CO bond and generated on the step sites could lower the C-Cl bond splitting barrier, leading to a high ECDR efficiency. Other chlorinated organics with an activated carbon atom were also investigated, which revealed that the superiority of the step sites toward Cl-C bond breaking was particular to the compounds with CO bonds. This study provides a deep understanding of high actvitiy of step sites on Pd NCs in EHDC and a strategy to improve this important environmental electrocatalysis process.

Effective stabilization of atomic hydrogen by Pd nanoparticles for rapid hexavalent chromium reduction and synchronous bisphenol A oxidation during the photoelectrocatalytic process

Atomic hydrogen (H*) plays a vital role in the synchronous redox of metallic ions and organic molecules. However, H* is extremely unstable as it is easily converted to hydrogen. Herein, we designed a novel strategy for the effective stabilization of H* to enhance its utility. The synthesized Pd nanoparticles grown on the defective MoS₂ (DMS) of TiO₂ nanowire arrays (TNA) (TNA/DMS/Pd) photocathode exhibited rapid Cr(VI) reduction (~95% in 10 min) and bisphenol A (BPA) oxidation (~97% in 30 min), with the kinetic constants almost 24- and 6-fold higher than those of the TNA photocathode, respectively. This superior performances could be attributed to: (i) the generated interface heterojunctions between TNA and DMS boosted the separation efficiencies of photogenerated electrons, thereby supplying abundant valance electrons to lower the overpotential to create a suitable microenvironment for H* generation; (ii) the stabilization of H* by Pd nanoparticles resulted in a significant increase in the yield of hydroxyl radical (•OH). This research provides a new strategy for the effective utilization of H* toward rapid reduction of heavy metals and synchronous oxidation of the refractory organics.

Feasibility study on the electrochemical reductive decomposition of PFOA by a Rh/Ni cathode

The discharge of widely used per- and poly-fluorinated compounds (PFCs) leads to their environmental prevalence, bioaccumulation and biotoxicity; and attracts researches focusing on their treatment in wastewater. Electrochemical reductive treatment is a promising alternative due to its milder reaction conditions and easy operation. The feasibility of electrochemical reductive decomposition of PFOA using a Rh/Ni cathode was explored. The Rh/Ni cathode was fabricated by coating Rh³⁺ on Ni foil through electrodeposition. The Rh coating was primarily elemental and in a Rh(111) crystalline form. PFOA decomposition and defluorination were observed when using the Rh/Ni cathode where DMF was the solvent and the cathode potential was -1.25 V. A hydrodefluorination reaction was considered having occurred. Because possessing d electrons and empty d orbitals, the Rh coating enhanced PFOA adsorption onto the cathode surface and facilitated CF bond activation through Rh···F interactions. Moreover, the Rh(111) crystal helped chemisorb the generated H* and supply it participating in PFOA decomposition. With the continuous interaction of cathode-supplied electrons, CF bond would ultimately dissociate and transform to CH bond by H* substitution. Adding FeCp₂* as a supporting electrolyte enhanced PFOA decomposition by working as the shuttle facilitating PFOA migration to the cathode surface.

On-Demand Atomic Hydrogen Provision by Exposing Electron-Rich Cobalt Sites in an Open-Framework Structure toward Superior Electrocatalytic Nitrate Conversion to Dinitrogen

Electrocatalytic nitrate (NO₃^-) reduction to N₂ via atomic hydrogen (H*) is a promising approach for advanced water treatment. However, the reduction rate and N₂ selectivity are hindered by slow mass transfer and H* provision-utilization mismatch, respectively. Herein, we report an open-framework cathode bearing electron-rich Co sites with extraordinary H* provision performance, which was validated by electron spin resonance (ESR) and cyclic voltammetry (CV) tests. Benefiting from its abundant channels, NO₃^- has a greater opportunity to be efficiently transferred to the vicinity of the Co active sites. Owing to the enhanced mass transfer and on-demand H* provision, the nitrate removal efficiency and N₂ selectivity of the proposed cathode were 100 and 97.89%, respectively, superior to those of noble metal-based electrodes. In addition, in situ differential electrochemical mass spectrometry (DEMS) indicated that ultrafast *NO₂^- to *NO reduction and highly selective *NO to *N₂O or *N transformation played crucial roles during the NO₃^- reduction process. Moreover, the proposed electrochemical system can achieve remarkable N₂ selectivity without the additional Cl^- supply, thus avoiding the formation of chlorinated byproducts, which are usually observed in conventional electrochemical nitrate reduction processes. Environmentally, energy conservation and negligible byproduct release ensure its practicability for use in nitrate remediation.