Anchoring Cu Nanoclusters on Melamine-Formaldehyde Microspheres: A New Strategy for Triggering Aggregation-Induced Emission toward Specific Enzyme-Free Methyl Parathion Sensing

Anchoring Au nanoclusters into coordination polymers: A novel approach toward ATP detection and its application

Adenosine triphosphate (ATP) is the main source of energy required for all life activities and is used as a biomarker for diseases such as cancer. It is of great significance to design a novel fluorescent probe with favorable performance for monitoring the changes of ATP concentration. Herein, a fluorescence probe named ZnCPs@AuNCs for ATP sensing was designed and fabricated by integrating AuNCs into ZnCPs. The emission intensity of AuNCs was greatly enhanced upon the formation of the ZnCPs@AuNCs nanocomposites, which may be attributed to ZnCPs restricting the molecular motion of AuNCs. Upon the introduction of ATP, the fluorescence intensity at 564 nm of ZnCPs@AuNCs is quenched. According to this phenomenon, a sensitive and reliable ATP sensing platform was established. Moreover, ZnCPs@AuNCs were incorporated into a poly (vinyl alcohol) matrix for the fabrication of fluorescent film, which exhibited solid-state fluorescence. Inspired by the remarkable fluorescent properties of ZnCPs@AuNCs, the fluorescent hydrogel was prepared by mixing ZnCPs@AuNCs with κ-carrageenan, which demonstrated a response to ATP and favorable self-healing ability. This work presents a perspective of ZnCPs@AuNCs in multiple applications such as biosensing, fluorescent film, and hydrogel construction.

Research progress of fluorescent composites based on cyclodextrins: Preparation strategies, fluorescence properties and applications in sensing and bioimaging

Fluorescence analysis has been regarded as one of the commonly used analytical methods because of its advantages of simple operation, fast response, low cost and high sensitivity. So far, various fluorescent probes, with noble metal nanoclusters, quantum dots, organic dyes and metal organic frameworks as representatives, have been widely reported. However, single fluorescent probe often suffers from some deficiencies, such as low quantum yield, poor chemical stability, low water solubility and toxicity. To overcome these disadvantages, the introduction of cyclodextrins into fluorescent probes has become a fascinating approach. This review (with 218 references) systematically covers the research progress of fluorescent composites based on cyclodextrins in recent years. Preparation strategies, fluorescence properties, response mechanisms and applications in sensing (ions, organic pollutants, bio-related molecules, temperature, pH) and bioimaging of fluorescent composites based on cyclodextrins are summarized in detail. Finally, the current challenges and future perspectives of these composites in relative research fields are discussed.

Anchoring copper nanoclusters to Al2O3 microsphere for dual-mode analysis of N-acetyl-β-D-glucosaminidase and information encryption

Herein, we attempted to confine copper nanoclusters (CuNCs) with alumina (Al2O3) as the matrix (Al2O3@CuNCs), which effectively circumvented the drawbacks of CuNCs (such as weak photoluminescence and low quantum yield). Al2O3@CuNCs demonstrated sensitive response to p-nitrophenol, the catalytic product of N-acetyl-β-D-glucosaminidase (NAG) on account of the inner filter effect and dynamic quenching effect. In light of this, a novel assay was created to identify NAG, a critical indicator of diabetic nephropathy. Additionally, a portable and instrument-free sensing platform mainly consisting of a smartphone, a cuvette, a cuvette holder, a dark box and a 365 nm UV lamp was developed for the quantitative detection of NAG. The as-prepared material was also utilized in anti-counterfeiting and information encryption based on their excellent optical properties and sensitive response to the catalyzed product of NAG. This work advanced potential applications of CuNCs composites in the areas of portable, multi-mode biosensing, anti-counterfeiting and information encryption.

Fluorometric and colorimetric dual-mode sensing of α-glucosidase based on aggregation-induced emission enhancement of AuNCs

Herein, a fluorometric and colorimetric dual-mode assay platform used for α-glucosidase (α-Glu) activity sensing based on aggregation-induced emission enhancement (AIEE) of AuNCs was developed for the first time. The quantum yield (QY) and fluorescence lifetime of AuNCs were successfully ameliorated by Ce3+-triggered AIEE (Ce@AuNCs). Subsequently, on the basis of the inner filter effect (IFE) and dynamic quenching effect (DQE) between 2,6-dichlorophenolindophenol (DCIP) and Ce@AuNCs as well as the reduction of DCIP by ascorbic acid (AA) generated from α-Glu-catalyzed hydrolysis of L-ascorbic acid-2-O-α-D-glucopyranosyl (AA2G), the marriage of fluorometric and colorimetric modes applied for α-Glu activity monitoring was achieved. Besides, the feasibility of this dual-mode sensing system was confirmed by the assays versus potential interfering substances and in real samples. In particular, this system was further applied to evaluate natural α-Glu inhibitors (AGIs) including luteolin, apigenin, and hesperidin. Overall, the multi-mode optical sensor newly designed here has the potential for the accurate discovery of natural anti-diabetes drugs and the therapy of diabetes.

Simple and sensitive fluorescence sensing of methyl parathion based on the inner filter effect of p-nitrophenol on nitrogen-doped titanium carbide quantum dots

It is of great significance to develop an effective method for methyl parathion (MP) detection. Herein, a novel nitrogen-doped titanium carbide quantum dots (N-Ti3 C2 QDs) was prepared and used to construct a simple and sensitive fluorescence sensing platform of MP by making use of inner filter effect (IFE). The prepared N-Ti3 C2 QDs can exhibit strong blue fluorescence at 434 nm. Meanwhile, MP could hydrolyze to produce p-nitrophenol (p-NP) under alkaline conditions, which showed a characteristic ultraviolet-visible (UV-visible) absorption peak at 405 nm, resulting in the fluorescence of N-Ti3 C2 QDs is effectively quenched by p-NP. In addition, the investigation of time-resolved fluorescence decays indicated that the corresponding quenching mechanism of p-NP on N-Ti3 C2 QDs is due to the IFE. After optimizing the conditions, the as-developed fluorescence sensing platform displayed wide detection range (0.1-30 μg mL-1 ) and low detection limit (0.036 μg mL-1 ) for MP, and it was also successfully applied for MP analysis in real water samples, thus it is expected that this simple, sensitive and enzyme-free sensing platform shows great applications.

Aggregates-based fluorescence sensing technology for food hazard detection: Principles, improvement strategies, and applications

Aggregates often exhibit modified or completely new properties compared with their molecular elements, making them an extraordinarily advantageous form of materials. The fluorescence signal change characteristics resulting from molecular aggregation endow aggregates with high sensitivity and broad applicability. In molecular aggregates, the photoluminescence properties at the molecular level can be annihilated or elevated, leading to aggregation-causing quenching (ACQ) or aggregation-induced emission (AIE) effects. This change in photoluminescence properties can be intelligently introduced in food hazard detection. Recognition units can combine with the aggregate-based sensor by joining the aggregation process, endowing the sensor with the high specificity of analytes (such as mycotoxins, pathogens, and complex organic molecules). In this review, aggregation mechanisms, structural characteristics of fluorescent materials (including ACQ/AIE-activated), and their applications in food hazard detection (with/without recognition units) are summarized. Because the design of aggregate-based sensors may be influenced by the properties of their components, the sensing mechanisms of different fluorescent materials were described separately. Details of fluorescent materials, including conventional organic dyes, carbon nanomaterials, quantum dots, polymers and polymer-based nanostructures and metal nanoclusters, and recognition units, such as aptamer, antibody, molecular imprinting, and host-guest recognition, are discussed. In addition, future trends of developing aggregate-based fluorescence sensing technology in monitoring food hazards are also proposed.

A smartphone-based ratiometric fluoroprobe based on blue-red dual-emission signals of thiochrome and copper nanoclusters for sensitive assay of metam-sodium in cucumbers

It is of great importance to develop the highly efficient fluorescence strategy for rapid/sensitive detection of metam-sodium (MES) in evaluating its residual safety, especially in fresh vegetables. Herein, we prepared an organic fluorophore (thiochrome, TC) and glutathione-capped copper nanoclusters (GSH-CuNCs), and their combination (TC/GSH-CuNCs) was sucessfully employed as a ratiometric fluoroprobe by means of the blue-red dual emission. The fluorescence intensities (FIs) of TC decreased upon the addition of GSH-CuNCs via the fluorescence resonance energy transfer (FRET) process. When fortified at the constant levels of GSH-CuNCs and TC, MES substantially reduced the FIs of GSH-CuNCs, while this was not the case in the FIs of TC except for the prominent red-shift of ∼30 nm. Compared to the previous fluoroprobes, the TC/GSH-CuNCs based fluoroprobe supplied wider linear range of 0.2-500 μM, lower detection limit (60 nM), and satisfactory fortification recoveries (80-107%) for MES in the cucumber samples. Based on the fluorescence quenching phenomenon, a smartphone application was used to output RGB values of the captured images for the colored solution. The smartphone-based ratiometric sensor could be utilized for the visual fluorescent quantitation of MES by virtue of the R/B values in cucumbers, which gave linear range (1-200 μM) and LOD (0.3 μM). By means of blue-red dual-emission fluorescence, the smartphone-based fluoroprobe provides a cost-effective, portable and reliable avenue for the on-site, rapid and sensitive assay of MES's residues in complex vegetable samples.

Spatially confining copper nanoclusters in porous ZrO2 for fluorescence/colorimetry/smartphone triple-mode detection of metoprolol tartrate

Sensitive detection of metoprolol tartrate (MPT) is extremely urgent in the therapy of cardiovascular diseases to guarantee the curative effectiveness. Herein, porous ZrO₂ was first employed as a matrix to spatially confine CuNCs (ZrO₂@CuNCs), which simultaneously ameliorated the emission intensity and stability of CuNCs. Benefiting from the inner filter effect (IFE) and dynamic quenching effect (DQE) between ZrO₂@CuNCs and AuNPs and the color fading of AuNPs induced by MPT, fluorometric and colorimetric methods for simple and sensitive determination of MPT were proposed. Besides, to meet the demand of convenient detection of MPT, a portable sensing platform was constructed including a dark box produced by a 3D printer and a smartphone. This method was further employed to determine MPT in human serum and urine samples with satisfactory results with the triple mode. This work is the first attempt to fabricate a multi-mode optical and portable sensor for MPT detection, which provides a novel approach for point-of-care monitoring of drugs in the treatment of diseases.