Size- and Shape-Controlled Synthesis and Properties of Magnetic-Plasmonic Core-Shell Nanoparticles

Nanoengineered pure Fe in a citrate matrix (Fe-CIT) with significant and tunable magnetic properties

This work demonstrates the synthesis and characterization of Fe nanoparticles surrounded by a citrate (CIT) matrix prepared at various temperatures and concentrations of metal, capping agent and reducing agent at standard conditions. We study the effect of reactant ratio and reaction temperature on the magnetization of the produced nanoparticles and their crystal structure. We found that for optimal metal concentrations, magnetic saturation increases with increase in the concentration of capping and reducing agents but decreases as the temperature of the reaction increases. Synthesis conditions were tailored to reveal nucleation of particles with average sizes ranging from 24 to 105 nm and a spherical shape. The ultra-high saturation magnetization of 228 emu g-1obtained for samples prepared at a metal precursor concentration of 27.8 mol l-1was attributed to the formation of small magnetic domains. Energy band gap measurements revealed a band gap energy for the Fe nanoparticles in the CIT matrix which is associated with CIT concentration and/or possible formation of a few thin layers of iron oxide shell and does not have a significant effect on the magnetic properties of the samples. Herein, we demonstrate that the synthesis parameters are crucial for the nucleation of Fe-CIT nanoparticles tailoring their magnetizatic properties as well as their potential for different applications.

Magnetic-Plasmonic Nanocomposites as Versatile Substrates for Surface-enhanced Raman Scattering (SERS) Spectroscopy

Surface-enhanced Raman scattering (SERS) spectroscopy, a highly sensitive technique for detecting trace-level analytes, relies on plasmonic substrates. The choice of substrate, its morphology, and the excitation wavelength are crucial in SERS applications. To address advanced SERS requirements, the design and use of efficient nanocomposite substrates have become increasingly important. Notably, magnetic-plasmonic (MP) nanocomposites, which combine magnetic and plasmonic properties within a single particle system, stand out as promising nanoarchitectures with versatile applications in nanomedicine and SERS spectroscopy. In this review, we present an overview of MP nanocomposite fabrication methods, explore surface functionalization strategies, and evaluate their use in SERS. Our focus is on how different nanocomposite designs, magnetic and plasmonic properties, and surface modifications can significantly influence their SERS-related characteristics, thereby affecting their performance in specific applications such as separation, environmental monitoring, and biological applications. Reviewing recent studies highlights the multifaceted nature of these materials, which have great potential to transform SERS applications across a range of fields, from medical diagnostics to environmental monitoring. Finally, we discuss the prospects of MP nanocomposites, anticipating favorable developments that will make substantial contributions to various scientific and technological areas.

Multiplexed Surface Protein Detection and Cancer Classification Using Gap-Enhanced Magnetic-Plasmonic Core-Shell Raman Nanotags and Machine Learning Algorithm

Cancer is the second leading cause of death attributed to disease worldwide. Current standard detection methods often rely on a single cancer marker, which can lead to inaccurate results, including false negatives, and an inability to detect multiple cancers simultaneously. Here, we developed a multiplex method that can effectively detect and classify surface proteins associated with three distinct types of breast cancer by utilizing gap-enhanced Raman scattering nanotags and machine learning algorithm. We synthesized anisotropic magnetic core-gold shell gap-enhanced Raman nanotags incorporating three different Raman reporters. These multicolor Raman nanotags were employed to distinguish specific surface protein markers in breast cancer cells. The acquired signals were deconvoluted and analyzed using classical least-squares regression to generate a surface protein profile and characterize the breast cancer cells. Furthermore, computational data obtained via finite-difference time-domain and discrete dipole approximation showed the amplification of the electric fields within the gap region due to plasmonic coupling between the two gold layers. Finally, a random forest classifier achieved an impressive classification and profiling accuracy of 93.9%, enabling effective distinguishing between the three different types of breast cancer cell lines in a mixed solution. With the combination of immunomagnetic multiplex target specificity and separation, gap-enhancement Raman nanotags, and machine learning, our method provides an accurate and integrated platform to profile and classify different cancer cells, giving implications for identification of the origin of circulating tumor cells in the blood system.

Multiwavelength SERS of Magneto-Plasmonic Nanoparticles Obtained by Combined Laser Ablation and Solvothermal Methods

The present study introduces a novel method for the synthesis of magneto-plasmonic nanoparticles (MPNPs) with enhanced functionality for surface-enhanced Raman scattering (SERS) applications. By employing pulsed laser ablation in liquid (PLAL) to synthesize plasmonic nanoparticles and wet chemistry to synthesize magnetic nanoparticles, we successfully fabricated chemically pure hybrid Fe3O4@Au and Fe3O4@Ag nanoparticles. We demonstrated a straightforward approach of an electrostatic attachment of the plasmonic and magnetic parts using positively charged polyethylenimine. The MPNPs displayed high SERS sensitivity and reproducibility, and the magnetic part allowed for the controlled separation of the nanoparticles from the reaction mixture, their subsequent concentration, and their precise deposition onto a specified surface area. Additionally, we fabricated alloy based MPNPs from AgxAu100-x (x = 50 and 80 wt %) targets with distinct localized surface plasmon resonance (LSPR) wavelengths. The compositions, morphologies, and optical properties of the nanoparticles were characterized by using transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), UV-vis spectroscopy, and multiwavelength Raman spectroscopy. A standard SERS marker, 4-mercaptobenzoic acid (4-MBA), validated the enhancement properties of the MPNPs and found an enhancement factor of 2 × 108 for the Fe3O4@Ag nanoparticles at 633 nm excitation. Lastly, we applied MPNP-enhanced Raman spectroscopy for the analysis of the biologically relevant molecule adenine and found a limit of detection of 10-7 M at 785 nm excitation. The integration of PLAL and wet chemical methods enabled the relatively fast and cost-effective production of MPNPs characterized by high SERS sensitivity and signal reproducibility that are required in various fields, including biomedicine, food safety, materials science, security, and defense.

Fe3O4@C@MCM41-guanidine core-shell nanostructures as a powerful and recyclable nanocatalyst with high performance for synthesis of Knoevenagel reaction

In this study, preparation, characterization and catalytic application of a novel core-shell structured magnetic with carbon and mesoporous silica shells supported guanidine (Fe₃O₄@C@MCM41-guanidine) are developed. The Fe₃O₄@C@MCM41-guanidine was prepared via surfactant directed hydrolysis and condensation of tetraethyl orthosilicate around Fe₃O₄@C NPs followed by treatment with guanidinium chloride. This nanocomposite was characterized by using Fourier transform infrared spectroscopy, vibrating sample magnetometry, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, thermal gravimetric analysis, wide-angle X-ray diffraction and low-angle X-ray diffraction techniques. This nanocomposite have high thermal, chemical stability, and uniform size. Fe₃O₄@C@MCM41-guanidine catalyst demonstrated high yield (91-98%) to prepare of Knoevenagel derivatives under the solvent free conditions at room temperature in the shortest time. Also, this catalyst was recovered and reused 10 times without significant decrease in efficiency and stability. Fortunately, an excellent level of yield (98-82%) was observed in the 10 consecutive catalyst cycles.

Material design, development, and trend for surface-enhanced Raman scattering substrates

Surface-enhanced Raman scattering (SERS) is a powerful and non-invasive spectroscopic technique that can provide rich and specific chemical fingerprint information for various target molecules through effective SERS substrates. In view of the strong dependence of the SERS signals on the properties of the SERS substrates, design, exploration, and construction of novel SERS-active nanomaterials with low cost and excellent performance as the SERS substrates have always been the foundation and the top priority for the development and application of the SERS technology. This review specifically focuses on the extensive progress made in the SERS-active nanomaterials and their enhancement mechanism since the first discovery of SERS on the nanostructured plasmonic metal substrates. The design principles, unique functions, and influencing factors on the SERS signals of different types of SERS-active nanomaterials are highlighted, and insight into their future challenge and development trends is also suggested. It is highly expected that this review could benefit a complete understanding of the research status of the SERS-active nanomaterials and arouse the research enthusiasm for them, leading to further development and wider application of the SERS technology.

Universal linker-free assembly of core-satellite hetero-superstructures

Colloidal superstructures comprising hetero-building blocks often show unanticipated physical and chemical properties. Here, we present a universal assembly methodology to prepare hetero-superstructures. This straightforward methodology allows the assembly of building block materials varying from inorganic nanoparticles to living cells to form superstructures. No molecular linker is required to bind the building blocks together and thus the products do not contain any unwanted adscititious material. The Fourier transform infrared spectra, high resolution transmission electron microscopic images and nanoparticle adhesion force measurement results reveal that the key to self-organization is stripping surface ligands by adding non-polar solvents or neutralizing surface charge by adding salts, which allow us to tune the balance between van der Waals attraction and electrostatic repulsion in the colloid so as to trigger the assembling process. As a proof-of-concept, the superior photocatalytic activity and single-particle surface-enhanced Raman scattering of the corresponding superstructures are demonstrated. Our methodology greatly extends the scope of building blocks for superstructure assembly and enables scalable construction of colloidal multifunctional materials.

Multifunctional plasmonic-magnetic nanoparticles for bioimaging and hyperthermia

Multicompartment nanoparticles have raised great interest for different biomedical applications, thanks to the combined properties of different materials within a single entity. These hybrid systems have opened new avenues toward diagnosis and combination therapies, thus becoming preferred theranostic agents. When hybrid nanoparticles comprise magnetic and plasmonic components, both magnetic and optical properties can be achieved, which are potentially useful for multimodal bioimaging, hyperthermal therapies and magnetically driven selective delivery. Nanostructures comprising iron oxide and gold are usually selected for biomedical applications, as they display size-dependent properties, biocompatibility, and unique physical and chemical characteristics that can be tuned through highly precise synthetic protocols. We provide herein an overview of the most recent synthetic protocols to prepare magnetic-plasmonic nanostructures made of iron oxide and gold, to then highlight the progress made on multifunctional magnetic-plasmonic bioimaging and heating-based therapies. We discuss the advantages and limitations of the various systems in these directions.

Magnetic iron oxide cores with attached gold nanostructures coated with a layer of silica: An easily, homogeneously deposited new nanomaterial for surface-enhanced Raman scattering measurements

Nanostructures made of magnetic cores (Fe₃O₄) with many smaller plasmonic (Au) nanostructures attached were covered with a very thin layer of silica. The first example of the application of this type of material for surface-enhanced Raman scattering (SERS) measurements is presented. (Fe₃O₄@Au)@SiO₂ nanoparticles turned out to be very efficient substrates for SERS measurements. Moreover, due to the nanomaterial's strong magnetic properties, it can be easily manipulated using a magnetic field, and it is therefore possible to form homogeneous layers (with no significant 'coffee-ring' effect) of (Fe₃O₄@Au)@SiO₂ nanoparticles using a very simple procedure: depositing a drop of a sol of such nanoparticles and evaporating the solvent after placing the sample in a strong magnetic field. Synthesised (Fe₃O₄@Au)@SiO₂ nanostructures have been used for the SERS detection of penicillin G in milk. Good quality SERS spectra of penicillin G were obtained even at a concentration of penicillin G in milk of 1 nmol/l - this means that the SERS detection of penicillin G in milk is possible at a concentration lower than the maximum residue limit of penicillin G in milk established by the European Commission. .

Thermally Stable Magneto-Plasmonic Nanoparticles for SERS with Tunable Plasmon Resonance

Bifunctional magneto-plasmonic nanoparticles that exhibit synergistically magnetic and plasmonic properties are advanced substrates for surface-enhanced Raman spectroscopy (SERS) because of their excellent controllability and improved detection potentiality. In this study, composite magneto-plasmonic nanoparticles (Fe3O4@AgNPs) were formed by mixing colloid solutions of 50 nm-sized magnetite nanoparticles with 13 nm-sized silver nanoparticles. After drying of the layer of composite Fe3O4@AgNPs under a strong magnetic field, they outperformed the conventional silver nanoparticles during SERS measurements in terms of signal intensity, spot-to-spot, and sample-to-sample reproducibility. The SERS enhancement factor of Fe3O4@AgNP-adsorbed 4-mercaptobenzoic acid (4-MBA) was estimated to be 3.1 × 107 for a 633 nm excitation. In addition, we show that simply by changing the initial volumes of the colloid solutions, it is possible to control the average density of the silver nanoparticles, which are attached to a single magnetite nanoparticle. UV-Vis and SERS data revealed a possibility to tune the plasmonic resonance frequency of Fe3O4@AgNPs. In this research, the plasmon resonance maximum varied from 470 to 800 nm, suggesting the possibility to choose the most suitable nanoparticle composition for the particular SERS experiment design. We emphasize the increased thermal stability of composite nanoparticles under 532 and 442 nm laser light irradiation compared to that of bare Fe3O4 nanoparticles. The Fe3O4@AgNPs were further characterized by XRD, TEM, and magnetization measurements.

A CRISPR-Cas12a integrated SERS nanoplatform with chimeric DNA/RNA hairpin guide for ultrasensitive nucleic acid detection

Background: CRISPR-Cas12a has been integrated with nanomaterial-based optical techniques, such as surface-enhanced Raman scattering (SERS), to formulate a powerful amplification-free nucleic acid detection system. However, nanomaterials impose steric hindrance to limit the accessibility of CRISPR-Cas12a to the narrow gaps (SERS hot spots) among nanoparticles (NPs) for producing a significant change in signals after nucleic acid detection. Methods: To overcome this restriction, we specifically design chimeric DNA/RNA hairpins (displacers) that can be destabilized by activated CRISPR-Cas12a in the presence of target DNA, liberating excessive RNA that can disintegrate a core-satellite nanocluster via toehold-mediated strand displacement for orchestrating a promising "on-off" nucleic acid biosensor. The core-satellite nanocluster comprises a large gold nanoparticle (AuNP) core surrounded by small AuNPs with Raman tags via DNA hybridization as an ultrabright Raman reporter, and its disassembly leads to a drastic decrease of SERS intensity as signal readouts. We further introduce a magnetic core to the large AuNPs that can facilitate their separation from the disassembled nanostructures to suppress the background for improving detection sensitivity. Results: As a proof-of-concept study, our findings showed that the application of displacers was more effective in decreasing the SERS intensity of the system and attained a better limit of detection (LOD, 10 aM) than that by directly using activated CRISPR-Cas12a, with high selectivity and stability for nucleic acid detection. Introducing magnetic-responsive functionality to our system further improves the LOD to 1 aM. Conclusion: Our work not only offers a platform to sensitively and selectively probe nucleic acids without pre-amplification but also provides new insights into the design of the CRISPR-Cas12a/SERS integrated system to resolve the steric hindrance of nanomaterials for constructing biosensors.

The First Silver-Based Plasmonic Nanomaterial for Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy with Magnetic Properties

Nanostructures made of magnetic cores (from Fe₃O₄) with attached silver plasmonic nanostructures were covered with a very thin layer of silica. The (Fe₃O₄@Ag)@SiO₂ magnetic–plasmonic nanomaterial can be manipulated using a magnetic field. For example, one can easily form homogeneous layers from this nanomaterial using a very simple procedure: deposition of a layer of a sol of such a nanostructure and evaporation of the solvent after placing the sample in a strong magnetic field. Due to the rapid magnetic immobilization of the magnetic–plasmonic nanomaterial on the investigated surface, no coffee-ring effect occurs during the evaporation of the solvent. In this contribution, we report the first example of a magnetic, silver-based plasmonic nanomaterial for shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS). Nanoresonators based on silver plasmonic nanostructures locally enhance the intensity of the exciting electromagnetic radiation in a significantly broader frequency range than the previously used magnetic SHINERS nanoresonators with gold plasmonic nanostructures. Example applications where the resulting nanomaterial was used for the SHINERS investigation of a monolayer of mercaptobenzoic acid chemisorbed on platinum, and for a standard SERS determination of dopamine, are also presented.

A Mini Review on Surface-Enhanced Raman Scattering based Nanoclusters for Sensing and Imaging Applications

Background:

The invention of enhanced Raman scattering by adsorbing molecules on nanostructured metal surfaces is a milestone in the development of spectroscopic and analytical techniques. Important experimental and theoretical efforts were geared towards understanding the Surface Enhanced Raman Scattering effect (SERS) and evaluating its significance in a wide range of fields in different types of ultrasensitive sensing applications.

Methods:

Metal nanoclusters have been widely studied due to their unique structure and individual properties, which place them among single metal atoms and larger nanoparticles. In general, the nanoparticles with a size less than 2 nm is defined as nanoclusters (NCs) and they possess distinct optical properties. In addition, the excited electrons from absorption bands results in the emission of positive luminescence associated to the quantum size effect in which separate energy levels are produced.

Results:

It is demonstrated that fluorescent based SERS investigations of metal nanoparticles have showed more photostability, high compatibility, and good water solubility, has resulted in high sensitivity, better imaging and sensing experience in the biomedical applications.

Conclusion:

In the present review, we report recent trends in the synthesis of metal nanoclusters and their applications in biosensing and bio-imaging applications due some benefits including cost-effectiveness, easy synthesis routes and less consumption of sample volumes. Outcomes of this study confirms that SERS based fluorescent nanoclusters could be one of thrust research areas in biochemistry and biomedical engineering.

Recent Advances of Magnetic Gold Hybrids and Nanocomposites, and Their Potential Biological Applications

Magnetic gold nanoparticles (mGNP) have become a great interest of research for nanomaterial scientists because of their significant magnetic and plasmonic properties applicable in biomedical applications. Various synthetic approaches and surface modification techniques have been used for mGNP including the most common being the coprecipitation, thermal decomposition, and microemulsion methods in addition to the Brust Schiffrin technique, which involves the reduction of metal precursors in a two-phase system (water and toluene) in the presence of alkanethiol. The hybrid magnetic–plasmonic nanoparticles based on iron core and gold shell are being considered as potential theranostic agents. In this critical review, in addition to future works, we have summarized recent developments for synthesis and surface modification of mGNP with their applications in modern biomedical science such as drug and gene delivery, bioimaging, biosensing, and neuro-regeneration, neuro-degenerative and arthritic disorders. This review includes techniques and biological applications of mGNP majorly based on research from the previous six years.

Magnetic Nanoparticle-Mediated Heating for Biomedical Applications

Magnetic nanoparticles, especially superparamagnetic nanoparticles (SPIONs), have attracted tremendous attention for various biomedical applications. Facile synthesis and functionalization together with easy control of the size and shape of SPIONS to customize their unique properties, have made it possible to develop different types of SPIONs tailored for diverse functions/applications. More recently, considerable attention has been paid to the thermal effect of SPIONs for the treatment of diseases like cancer and for nanowarming of cryopreserved/banked cells, tissues, and organs. In this mini-review, recent advances on the magnetic heating effect of SPIONs for magnetothermal therapy and enhancement of cryopreservation of cells, tissues, and organs, are discussed, together with the non-magnetic heating effect (i.e., high Intensity focused ultrasound or HIFU-activated heating) of SPIONs for cancer therapy. Furthermore, challenges facing the use of magnetic nanoparticles in these biomedical applications are presented.

Synthesis and Characterization of NiCoPt/CNFs Nanoparticles as an Effective Electrocatalyst for Energy Applications

In this work, three nanoparticle samples, Ni4Co2Pt/CNFs, Ni5CoPt/CNFs and Ni6Pt/CNFs, were designed according to the molar ratio during loading on carbon nanofibers (CNFs) using electrospinning and carbonization at 900 °C for 7 h in an argon atmosphere. The metal loading and carbon ratio were fixed at 20 and 80 wt%, respectively. Various analysis tools were used to investigate the chemical composition, structural, morphological, and electrochemical (EC) properties. For samples with varying Co%, the carbonization process reduces the fiber diameter of the obtained electrospun nanofibers from 200-580 nm to 150-200 nm. The EDX mapping revealed that nickel, platinum, and cobalt were evenly and uniformly incorporated into the carbonized PVANFs. The prepared Ni-Co-Pt/CNFs have a face-centered cubic (FCC) structure with slightly increased crystallite size as the Co% decreased. The electrocatalytic properties of the samples were investigated for ethanol, methanol and urea electrooxidation. Using cyclic voltammetry (CV), chronoamperometry, and electrochemical impedance measurements, the catalytic performance and electrode stability were investigated as a function of electrolyte concentration, scan rate, and reaction time. When Co is added to Ni, the activation energy required for the electrooxidation reaction decreases and the electrode stability increases. In 1.5 M methanol, the Ni5CoPt/CNFs electrode showed the lowest onset potential and the highest current density (30.6 A/g). This current density is reduced to 28.2 and 21.2 A/g for 1.5 M ethanol and 0.33 M urea, respectively. The electrooxidation of ethanol, methanol, and urea using our electrocatalysts is a combination of kinetic/diffusion control limiting reactions. This research provided a unique approach to developing an efficient Ni-Co-Pt-based electrooxidation catalyst for ethanol, methanol and urea.

Statistically Representative Metrology of Nanoparticles via Unsupervised Machine Learning of TEM Images

The morphology of nanoparticles governs their properties for a range of important applications. Thus, the ability to statistically correlate this key particle performance parameter is paramount in achieving accurate control of nanoparticle properties. Among several effective techniques for morphological characterization of nanoparticles, transmission electron microscopy (TEM) can provide a direct, accurate characterization of the details of nanoparticle structures and morphology at atomic resolution. However, manually analyzing a large number of TEM images is laborious. In this work, we demonstrate an efficient, robust and highly automated unsupervised machine learning method for the metrology of nanoparticle systems based on TEM images. Our method not only can achieve statistically significant analysis, but it is also robust against variable image quality, imaging modalities, and particle dispersions. The ability to efficiently gain statistically significant particle metrology is critical in advancing precise particle synthesis and accurate property control.

Recent Advances in the Use of Iron-Gold Hybrid Nanoparticles for Biomedical Applications

Recently, there has been an increased interest in iron-gold-based hybrid nanostructures, due to their combined outstanding optical and magnetic properties resulting from the usage of two separate metals. The synthesis of these nanoparticles involves thermal decomposition and modification of their surfaces using a variety of different methods, which are discussed in this review. In addition, different forms such as core-shell, dumbbell, flower, octahedral, star, rod, and Janus-shaped hybrids are discussed, and their unique properties are highlighted. Studies on combining optical response in the near-infrared window and magnetic properties of iron-gold-based hybrid nanoparticles as multifunctional nanoprobes for drug delivery, magnetic-photothermal heating as well as contrast agents during magnetic and optical imaging and magnetically-assisted optical biosensing to detect traces of targeted analytes inside the body has been reviewed.

Advances in Hollow Inorganic Nanomedicines for Photothermal-Based Therapies

Nanotechnology has prompted the development of hollow inorganic nanomedicine. These medicines are now widely investigated as photothermal-based therapies for various diseases due to their high loading capacity, tuneable wavelength, relatively small size and low density. We begin this review with a brief introduction, followed by a summary of the development of imaging-guided photothermal therapy (PTT) for cancer treatment during the last three years (from 2017 to 2020). We then introduce the antibacterial effects of these medicines on some bacterial infections, in which the pathogenic bacteria can be killed by mild photothermal effects, ions and antibiotic release. Other diseases can also be treated using hollow inorganic photothermal agents. Specifically, we discuss the use of PTT for treating Alzheimer's disease, obesity and endometriosis. Finally, we share our perspectives on the current challenges and future prospects of using hollow inorganic materials in clinical PTT for various diseases.

Pt distribution-controlled Ni–Pt nanocrystals via an alcohol reduction technique for the oxygen reduction reaction

The catalytic performance and durability of Ni–Pt alloy nanoparticles synthesized using an alcohol reduction technique were enhanced by controlling the metallic Pt distribution.

Galvanic Replacement as a Synthetic Tool for the Construction of Anisotropic Magnetoplasmonic Nanocomposites with Synergistic Phototransducing and Magnetic Properties

Magnetoplasmonic nanomaterials, which combine light and magnetic field responsiveness in an advantageous manner, are attractive candidates for bio-nanoapplications. However, the synthetic access to such hybrid particles has been limited by the incompatibility of the iron- and gold-based lattices. In this work, we provide the first insights into a new synthetic strategy for developing magnetoplasmonic anisotropic nanocomposites with prominent phototransducing properties. In our approach, magnetic nanocubes based on an alloy of iron oxide, zinc, and silver were constructed. In a key second stage, the galvanic replacement of silver with gold atoms yielded satellite-like magnetoplasmonic anisotropic structures. Superior magnetic and photoconverting properties were observed for the novel magnetoplasmonic nanocomposites when compared with the pure parent structures. Moreover, the synergy between the magnetic and optical stimuli was examined, showing shape-dependent contributions in the magnetization experiments. More importantly, an excellent cell ablation capability upon laser irradiation was observed for the magnetoplasmonic nanocomposites compared to the pure magnetic or plasmonic controls. Further demonstration of these novel theragnostic agents as MRI contrast agents is also reported even during the light-irradiation event. Thus, the described particles showed promising properties for bioapplications emerging from the novel synthetic methodology.

Broadening and Enhancing Bacteriocins Activities by Association with Bioactive Substances

Bacteriocins are antimicrobial peptides some of which are endowed with antiviral, anticancer and antibiofilm properties. These properties could be improved through synergistic interactions of these bacteriocins with other bioactive molecules such as antibiotics, phages, nanoparticles and essential oils. A number of studies are steadily reporting the effects of these combinations as new and potential therapeutic strategies in the future, as they may offer many incentives over existing therapies. In particular, bacteriocins can benefit from combination with nanoparticles which can improve their stability and solubility, and protect them from enzymatic degradation, reduce their interactions with other molecules and improve their bioavailability. Furthermore, the combination of bacteriocins with other antimicrobials is foreseen as a way to reduce the development of antibiotic resistance due to the involvement of several modes of action. Another relevant advantage of these synergistic combinations is that it decreases the concentration of each antimicrobial component, thereby reducing their side effects such as their toxicity. In addition, combination can extend the utility of bacteriocins as antiviral or anticancer agents. Thus, in this review, we report and discuss the synergistic effects of bacteriocin combinations as medicines, and also for other diverse applications including, antiviral, antispoilage, anticancer and antibiofilms.

Immunomagnetic Capture and Multiplexed Surface Marker Detection of Circulating Tumor Cells with Magnetic Multicolor Surface-Enhanced Raman Scattering Nanotags

Circulating tumor cells (CTCs) have substantial clinical implications in cancer diagnosis and monitoring. Although significant progress has been made in developing technologies for CTC detection and counting, the ability to quantitatively detect multiple surface protein markers on individual tumor cells remains very limited. In this work, we report a multiplexed method that uses magnetic multicolor surface-enhanced Raman scattering (SERS) nanotags in conjunction with a chip-based immunomagnetic separation to quantitatively and simultaneously detect four surface protein markers on individual tumor cells in whole blood. Four-color SERS nanotags were prepared using magnetic-optical iron oxide-gold core-shell nanoparticles with different Raman reporters to recognize four different cancer markers with respective antibodies. A microfluidic device was fabricated to magnetically capture the nanoparticle-bound tumor cells and to perform online negative staining and single-cell optical detection. The level of each targeted protein was obtained by signal deconvolution of the mixed SERS signals from individual tumor cells using the classic least squares regression method. The method was tested with spiked tumor cells in human whole blood with three different breast cancer cell lines and compared with the results of purified cancer cells suspended in a phosphate buffer solution. The method, with either spiked cancer cells in blood or purified cancer cells, showed a strong correlation with purified cancer cells by enzyme-linked immunosorbent assay, suggesting the potential of our method for the reliable detection of multiple surface markers on CTCs. Combining immunomagnetic enrichment with high specificity, multiplexed targeting for the capture of CTC subpopulations, multicolor SERS detection with high sensitivity and specificity, microfluidics for handling rare cells and magnetic-plasmonic nanoparticles for dual enrichment and detection, our method provides an integrated, yet a simple and an efficient platform that has the potential to more sensitively detect and monitor cancer metastasis.

Mechanistic Aspects of Simultaneous Extraction of Silver and Gold Nanoparticles across Aqueous-Organic Interfaces by Surface Active Iron Oxide Nanoparticles

Surface active iron oxide nanoparticles (NPs) were used for the simultaneous extraction of water soluble Ag and Au NPs across an aqueous-organic interface from aqueous bulk. The surface activity of iron oxide NPs was achieved by using cationic Gemini surfactants of different architectures during the in situ synthesis of iron oxide NPs in hydrothermal synthesis. Aqueous bulk solubility of Ag and Au NPs was achieved by stabilizing them with conventional surfactants of different polarities such as SDS, CTAB, and DDM. The amphiphilic nature of iron oxide NPs demonstrated their remarkable ability to extract Ag and Au NPs through both hydrophilic and hydrophobic interactions. The mechanism of extraction from aqueous bulk was monitored by placing different amounts of surface active iron oxide NPs on the aqueous-organic interface and was studied with the help of UV-visible, DLS, and IR measurements. XPS and TEM measurements were used for the quantitative estimation of efficiency of extraction. Extraction was facilitated when both hydrophilic and hydrophobic interactions were participating simultaneously. Results may help in designing a suitable method for purification of industrial effluents contaminated with metal particulates simply by applying an external magnetic field rather than going through a complicated conventional filtration process.

Photopolarimetrical properties of coronavirus model particles: Spike proteins number influence

Coronavirus virions have spherical shape surrounded by spike proteins. The coronavirus spike proteins are very effective molecular mechanisms, which provide the coronavirus entrance to the host cell. The number of these spikes is different; it dramatically depends on external conditions and determines the degree of danger of the virus. A larger number of spike proteins makes the virus infectivity stronger. This paper describes a mathematical model of the shape of coronavirus virions. Based on this model, the characteristics of light scattered by the coronavirus virions were calculated. It was found two main features of coronavirus model particles in the spectral region near 200 nm: a minimum of intensity and a sharp leap of the linear polarization degree. The effect of the spike protein number on the intensity and polarization properties of the scattered light was studied. It was determined that when the number of spike proteins decreases, both the intensity minimum and the position of the linear polarization leap shift to shorter wavelengths. This allows us to better evaluate the shape of the coronavirus virion, and, therefore, the infectious danger of the virus. It was shown that the shorter the wavelength of scattered light, the more reliably one can distinguish viruses from non-viruses. The developed model and the light scattering simulations based on it can be applied not only to coronaviruses, but also to other objects of a similar structure, for example, pollen.

Small mode volume plasmonic film-coupled nanostar resonators

Confining and controlling light in extreme subwavelength scales are tantalizing tasks. In this work, we report a study of individual plasmonic film-coupled nanostar resonators where polarized plasmonic optical modes are trapped in ultrasmall volumes. Individual gold nanostars, separated from a flat gold film by a thin dielectric spacer layer, exhibit a strong light confinement between the sub-10 nm volume of the nanostar's tips and the film. Through dark field scattering measurements of many individual nanostars, a statistical observation of the scattered spectra is obtained and compared with extensive simulation data to reveal the origins of the resonant peaks. We observe that an individual nanostar on a flat gold film can result in a resonant spectrum with single, double or multiple peaks. Further, these resonant peaks are strongly polarized under white light illumination. Our simulation data revealed that the resonant spectrum of an individual film-coupled nanostar resonator is related to the symmetry of the nanostar, as well as the orientation of the nanostar relative to its placement on the gold substrate. Our results demonstrate a simple new method to create an ultrasmall mode volume and polarization sensitive plasmonic platform which could be useful for applications in sensing or enhanced light-matter interactions.

Plasmon-assisted random lasing from a single-mode fiber tip

Random lasing occurs as the result of a coherent optical feedback from multiple scattering centers. Here, we demonstrate that plasmonic gold nanostars are efficient light scattering centers, exhibiting strong field enhancement at their nanotips, which assists a very narrow bandwidth and highly amplified coherent random lasing with a low lasing threshold. First, by embedding plasmonic gold nanostars in a rhodamine 6G dye gain medium, we observe a series of very narrow random lasing peaks with full-width at half-maximum ∼ 0.8 nm. In contrast, free rhodamine 6G dye molecules exhibit only a single amplified spontaneous emission peak with a broader linewidth of 6 nm. The lasing threshold for the dye with gold nanostars is two times lower than that for a free dye. Furthermore, by coating the tip of a single-mode optical fiber with gold nanostars, we demonstrate a collection of random lasing signal through the fiber that can be easily guided and analyzed. Time-resolved measurements show a significant increase in the emission rate above the lasing threshold, indicating a stimulated emission process. Our study provides a method for generating random lasing in the nanoscale with low threshold values that can be easily collected and guided, which promise a range of potential applications in remote sensing, information processing, and on-chip coherent light sources.

Star-Shaped Fe3-xO4-Au Core-Shell Nanoparticles: From Synthesis to SERS Application

In this work, the preparation of magneto-plasmonic granular nanostructures and their evaluation as efficient substrates for magnetically assisted surface enhanced Raman spectroscopy (SERS) sensing are discussed. These nanostructures consist of star-shaped gold Au shell grown on iron oxide Fe3-xO4 multicores. They were prepared by seed-mediated growth of anisotropic, in shape gold nanosatellites attached to the surface of polyol-made iron oxide polycrystals. In practice, the 180 nm-sized spherical iron oxide particles were functionalized by (3-aminopropyl) triethoxysilane (APTES) to become positively charged and to interact, in solution, with negatively charged 2 nm-sized Au single crystals, leading to nanohybrids. These hybrids acted subsequently as nucleation platforms for the growth of a branched gold shell, when they were contacted to a fresh HAuCl4 gold salt aqueous solution, in the presence of hydroquinone, a reducing agent, for an optimized nominal weight ratio between both the starting hybrids and the gold salt. As expected, the resulting nanocomposites exhibit a high saturation magnetization at room temperature and a rough enough plasmonic surface, making them easily attracted by a lab. magnet, while exhibiting a great number of SERS hot spots. Preliminary SERS detection assays were successfully performed on diluted aqueous thiram solution (10-8 M), using these engineered substrates, highlighting their capability to be used as chemical trace sensors.

Morphology of Composite Fe@Au Submicron Particles, Produced with Ultrasonic Spray Pyrolysis and Potential for Synthesis of Fe@Au Core-Shell Particles

Iron core–gold shell (Fe@Au) nanoparticles are prominent for their magnetic and optical properties, which are especially beneficial for biomedical uses. Some experiments were carried out to produce Fe@Au particles with a one-step synthesis method, Ultrasonic Spray Pyrolysis (USP), which is able to produce the particles in a continuous process. The Fe@Au particles were produced with USP from a precursor solution with dissolved Iron (III) chloride and Gold (III) chloride, with Fe/Au concentration ratios ranging from 0.1 to 4. The resulting products are larger Fe oxide particles (mostly maghemite Fe₂O₃), with mean sizes of about 260–390 nm, decorated with Au nanoparticles (AuNPs) with mean sizes of around 24–67 nm. The Fe oxide core particles are mostly spherical in all of the experiments, while the AuNPs become increasingly irregular and more heavily agglomerated with lower Fe/Au concentration ratios in the precursor solution. The resulting particle morphology from these experiments is caused by surface chemistry and particle to solvent interactions during particle formation inside the USP system.

Multimodal Composite Iron Oxide Nanoparticles for Biomedical Applications

Background

Iron oxide nanoparticles (IONPs) are excellent candidates for biomedical imaging because of unique characteristics like enhanced colloidal stability and excellent in vivo biocompatibility. Over the last decade, material scientists have developed IONPs with better imaging and enhanced optical absorbance properties by tuning their sizes, shape, phases, and surface characterizations. Since IONPs could be detected with magnetic resonance imaging, various attempts have been made to combine other imaging modalities, thereby creating a high-resolution imaging platform. Composite IONPs (CIONPs) comprising IONP cores with polymeric or inorganic coatings have recently been documented as a promising modality for therapeutic applications.

Methods

In this review, we provide an overview of the recent advances in CIONPs for multimodal imaging and focus on the therapeutic applications of CIONPs.

Result

CIONPs with phototherapeutics, IONP-based nanoparticles are used for theranostic application via imaging guided photothermal therapy.

Conclusion

CIONP-based nanoparticles are known for theranostic application, longstanding effects of composite NPs in in vivo systems should also be studied. Once such issues are fixed, multifunctional CIONP-based applications can be extended for theranostics of diverse medical diseases in the future.

Multifunctional Magnetic Gold Nanomaterials for Cancer

The integration of multiple imaging and therapeutic agents into a customizable nanoplatform for accurate identification and rapid prevention of cancer is attracting great attention. Among the available theranostic nanosystems, magnetic gold nanoparticles are particularly promising as they exhibit unique physicochemical properties that can support multiple functions, including cancer diagnosis by magnetic resonance imaging, X-ray computed tomography, Raman and photoacoustic imaging, drug delivery, and plasmonic photothermal and photodynamic therapies. This review gives an overview of recent advances in the fabrication of multifunctional gold nanohybrids with magnetic and optical properties and their successful demonstration in multimodal imaging and therapy of cancer. Concerns around toxicity of these nanomaterials are also discussed in view of an imminent transition to clinical practice.

Optical Properties of Au-based and Pt-based Alloys for Infrared Device Applications: A Combined First Principle and Electromagnetic Simulation Study

Due to the rapid progress in MEMS-based infrared emitters and sensors, strong demand exists for suitable plasmonic materials for such microdevices. We examine the possibility of achieving this goal by alloying other metals with the noble metals Au and Pt, which have some drawbacks, such as low melting point, structural instability, and high costs. The six different metals (Ir, Mo, Ni, Pb, Ta, and W) which possess good properties for heat resistance, stability, and magnetism are mixed with noble metals to improve the properties. The optical properties are calculated by density functional theory and they are used for further investigations of the optical responses of alloy nanorods. The results show that the studied alloy nanorods have wavelength selective properties and can be useful for infrared devices and systems.

Synthetic Methodologies to Gold Nanoshells: An Overview

Gold nanostructures that can be synthetically articulated to adapt diverse morphologies, offer a versatile platform and tunable properties for applications in a variety of areas, including biomedicine and diagnostics. Among several conformational architectures, gold nanoshells provide a highly advantageous combination of properties that can be fine-tuned in designing single or multi-purpose nanomaterials, especially for applications in biology. One of the important parameters for evaluating the efficacy of gold nano-architectures is their reproducible synthesis and surface functionalization with desired moieties. A variety of methods now exist that allow fabrication and chemical manipulation of their structure and resulting properties. This review article provides an overview and a discussion of synthetic methodologies to a diverse range of gold nanoshells, and a brief summary of surface functionalization and characterization methods employed to evaluate their overall composition.

Iron Oxide and Gold Based Magneto-Plasmonic Nanostructures for Medical Applications: A Review

Iron oxide and gold-based magneto-plasmonic nanostructures exhibit remarkable optical and superparamagnetic properties originating from their two different components. As a consequence, they have improved and broadened the application potential of nanomaterials in medicine. They can be used as multifunctional nanoprobes for magneto-plasmonic heating as well as for magnetic and optical imaging. They can also be used for magnetically assisted optical biosensing, to detect extreme traces of targeted bioanalytes. This review introduces the previous work on magneto-plasmonic hetero-nanostructures including: (i) their synthesis from simple “one-step” to complex “multi-step” routes, including seed-mediated and non-seed-mediated methods; and (ii) the characterization of their multifunctional features, with a special emphasis on the relationships between their synthesis conditions, their structures and their properties. It also focuses on the most important progress made with regard to their use in nanomedicine, keeping in mind the same aim, the correlation between their morphology—namely spherical and non-spherical, core-satellite and core-shell, and the desired applications.

Solvent dependent dispersion behaviour of macrocycle stabilized cobalt nanoparticles and their applications

Cobalt nanoparticles have been prepared by using amine phthalocyanine as a stabilizing agent in one step.

Construction of iron oxide nanoparticle-based hybrid platforms for tumor imaging and therapy

This review highlights the most recent progress in the construction of iron oxide nanoparticle-based hybrid platforms for tumor imaging and therapy.

Ultrasonic assisted synthesis of palladium-nickel/iron oxide core-shell nanoalloys as effective catalyst for Suzuki-Miyaura and p-nitrophenol reduction reactions

In this study, ultrasonic assisted synthesis of Pd-Ni/Fe₃O₄ core-shell nanoalloys is reported. Unique reaction condition was prepared by ultrasonic irradiation, releasing the stored energy in the collapsed bubbles and heats the bubble contents that leads to Pd(II) and Ni(II) reduction. Co-precipitation method was applied for the synthesis of Fe₃O₄ nanoparticles (NPs). Immobilized solution was produced by sonicating the aqueous mixture of Fe₃O₄ and mercaptosuccinic acid to obtain Pd-Ni alloys on Fe₃O₄ magnetic NP cores. The catalytic activity of the synthesized Pd-Ni/Fe₃O₄ core-shells was investigated in the Suzuki-Miyaura CC coupling reaction and 4-nitrophenol reduction, which exhibited a high catalytic activity in both reactions. These magnetic NPs can be separated from the reaction mixture by external magnetic field. This strategy is simple, economical and promising for industrial applications.

Synthesis of phytochemicals-stabilized gold nanoparticles and their biological activities against bacteria and Leishmania

Nanoscale materials have shown promising results in the field of medicine as therapeutic agents and drugs delivery vehicles. In the current study, gold nanoparticles (AuNPs) were prepared by a green and facile method using the aqueous extract of Rhazya stricta decne as a source of reducing and stabilizing agents. The bio-fabricated AuNPs were characterized by UV-visible spectroscopy, X-ray diffraction (XRD), Transmission electron microscopy (TEM) and FTIR spectroscopy. Antimicrobial activities of the biosynthesized AuNPs were tested against Leishmania tropica (HTD₇), E. coli and S. aureus. AuNPs were the most effective agents in inhibiting the growth of intra-THP-1 amastigotes at 100 μg/mL concentration (IC₅₀ = 43 μg/mL) after 48-h incubation. In addition, the prepared AuNPs also displayed good activity against E. coli (MIC = 25.0 μg/mL) and Bacillus subtilis (50.0 μg/mL). Interestingly, biogenic AuNPs did not exhibit cytotoxic effect against the THP-1 cells after 24 h exposure. The findings of this study conclude that phytochemicals-stabilized AuNPs could be a safe and effective source of antimicrobial agents.

One-Step Facile Synthesis of Highly Magnetic and Surface Functionalized Iron Oxide Nanorods for Biomarker-Targeted Applications

We report a one-step method for facile and sustainable synthesis of magnetic iron oxide nanorods (or IONRs) with mean lengths ranging from 25 to 50 nm and mean diameters ranging from 5 to 8 nm. The prepared IONRs are highly stable in aqueous media and can be surface functionalized for biomarker-targeted applications. This synthetic strategy involves the reaction of iron(III) acetylacetonate with polyethyleneimine in the presence of oleylamine and phenyl ether, followed by thermal decomposition. Importantly, the length and diameter as well as the aspect ratio of the prepared IONRs can be controlled by modulating the reaction parameters. We show that the resultant IONRs exhibit stronger magnetic properties compared to those of the widely used spherical iron oxide nanoparticles (IONPs) at the same iron content. The increased magnetic properties are dependent on the aspect ratio, with the magnetic saturation gradually increasing from 10 to 75 emu g^-1 when increasing length of the IONRs, 5 nm in diameter, from 25 to 50 nm. The magnetic resonance imaging (MRI) contrast-enhancing effect, as measured in terms of the transverse relaxivity, r₂, increased from 670.6 to 905.5 mM^-1 s^-1, when increasing the length from 25 to 50 nm. When applied to the immunomagnetic cell separation of the transferrin receptor (TfR)-overexpressed medulloblastoma cells using transferrin (Tf) as the targeting ligand, Tf-conjugated IONRs can capture 92 ± 3% of the targeted cells under a given condition (2.0 × 10⁴ cells/mL, 0.2 mg Fe/mL concentration of magnetic materials, and 2.5 min of incubation time) compared to only 37 ± 2% when using the spherical IONPs, and 14 ± 2% when using commercially available magnetic beads, significantly improving the efficiency of separating the targeted cells.

Assumption-free morphological quantification of single anisotropic nanoparticles and aggregates

Characterizing the morphometric parameters of noble metal nanoparticles for sensing and catalysis is a persistent challenge due to their small size and complex shape. Herein, we present an approach to determine the volume, surface area, and curvature of non-symmetric anisotropic nanoparticles using electron tomography and design-based stereology without the use of segmentation tools or modeling of the particles. Finally, we apply these tools to aggregates to estimate their fractal dimension.

Synthesis and Properties of Magnetic-Optical Core-Shell Nanoparticles

Due to their high integrity, facile surface chemistry, excellent stability, and dual properties from the core and shell materials, magnetic-plasmonic core-shell nanoparticles are of great interest across a number of science, engineering and biomedical disciplines. They are promising for applications in a broad range of areas including catalysis, energy conversion, biological separation, medical imaging, disease detection and treatment. The technological applications have driven the need for high quality nanoparticles with well controlled magnetic and optical properties. Tremendous progress has been made during past few decades in synthesizing and characterizing magnetic-plasmonic core-shell nanoparticles, mainly iron oxide-gold core-shell nanoparticles. This review introduces various approaches for the synthesis of spherical and anisotropic magnetic-plasmonic core-shell nanoparticles focusing on iron oxide-gold core-shell nanoparticles. Growth mechanisms are discussed to provide understanding of the key factors controlling shape-controlled synthesis. Magnetic and optical properties are summarized from both computational and experimental studies.