Devising Chemically Robust and Cationic Ni(II)-MOF with Nitrogen-Rich Micropores for Moisture-Tolerant CO2 Capture: Highly Regenerative and Ultrafast Colorimetric Sensor for TNP and Multiple Oxo-Anions in Water with Theoretical Revelation

The computational density functional theory (DFT) investigating the CO gas adsorption on magnesium porphyrin nanorings (Mg4@PNR4)

The decorated butadiyne-linked four porphyrin nanorings with four magnesium cations (Mg4@PNR4) represented a novel class of nanoscale molecules. This Mg4@PNR4 system could be considered as a high surface area with favorable chemical and physical properties which has inherent ability to form hydrogen and covalent bonds. The Mg4@PNR4 system could contribute to air purification and greenhouse gas decrease by efficiently capturing toxic gases such as carbon dioxide and nitrogen oxides. This study aims to scrutinise and improve the CO gas sensing capacity of the Mg4@PNR4 system with four porphyrin rings using density functional theory (DFT). In all configurations, the adsorption values were negative which indicates adsorption process is physical and reversible. Also, the CO gas adsorption, in all configurations, increased the band gap of nanoring by 114-121 % and reduced the conductivity of the nanoring. Additionally, the recovery times were in the range of nano, pico and femto seconds which showed the rapid desorption of CO gas after physical adsorption. According to the NBO investigations, the amount of positive charge in the magnesium ions decreases and the positive charge in the gas increases during the adsorption of CO molecule on the nanoring. Eventually, the FMO analysis and the electron transfer amount (ΔN) showed that the electrons were transferring from CO to the porphyrin nanoring.

Strategic Design of a Functionalized Al(III) Metal-Organic Framework for Chemical Fixation of CO2 inside Alkynes under Ambient Conditions and Synthesis of Biologically Important Heterocycles

The increasing impact of elevated atmospheric CO2 levels on climate and biological systems underscores the urgent need for effective materials to mitigate these concentrations. Simultaneously, the demand for quinoline derivatives has risen sharply due to their critical role in synthesizing life-saving drugs. Here, we present the synthesis, characterization, and catalytic activity of an aqua-stable Al(III) metal-organic framework (MOF 1') and its postmodified variant doped with Ag(0) nanoparticles (1'-Ag NPs). The native MOF (1') and its nanoparticle-anchored derivative exhibited remarkable efficacy in two key areas: the quantitative synthesis of quinoline heterocycles and irreversible chemical fixation of CO2 into various alkynes. Under ambient temperature and atmospheric CO2 pressure, 1'-Ag NPs demonstrated exceptional catalytic performance for the cyclization of propargylic alcohols. Moreover, the catalysts exhibited excellent recyclability across multiple reusability cycles. Detailed control experiments revealed that the outstanding performance of 1' and 1'-Ag NPs stems from the anchored functional groups within 1' and the highly exposed alkalophilic Ag(0) catalytic sites distributed along the surface of 1'-Ag NPs. This study highlights the dual utility of 1' and 1'-Ag NPs, demonstrating their potential in both the selective synthesis of quinoline heterocycles and the environmentally sustainable capture and irreversible chemical conversion of CO2 under mild conditions.

Microstructural Modulation of Isomorphic Luminescent Coordination Polymers To Achieve Sensing Effect Transformation

The sensing effect transformation is first exploited by microstructural modulation. Two AIE functional ligands L-1 and L-2 were developed to construct two isomorphic coordination polymers [Cu(L-1)2(SCN)2]n (1) and [Cu(L-2)2(SCN)2]n (2), respectively (L-1 = 4,4'-((9H-fluoren-9-ylidene)-methylene)dipyridine; L-2 = 5,5'-((9H-fluoren-9-ylidene)-methylene)dipyrimidine). 1 and 2 exhibit 1-D single-chain architectures and have good water, pH, and thermal stabilities. 1 and 2 show the functional-ligand-originated luminescence and reduced emission intensities. L-1 and L-2 stack in a back-to-back manner in 1 and 2 with the distances of 4.61 and 5.38 Å, resulting in distinct MnO4- sensing effects for 1 and 2. 1 exhibits "turn-off" (luminescence quenching) MnO4- sensing. In a sharp contrast, 2 shows "turn-on" (luminescence enhancing) MnO4- sensing ability with ultrahigh sensitivity. Particularly, 2 represents the first "turn-on" MnO4- sensor. Their sensing mechanism toward a distinct MnO4- sensing effect is discussed in detail.

Mixed-ligand based water-stable Mn(II)-MOF for quick, sensitive, and reusable IFE-PET-RET facilitated detection of formaldehyde and Cr(VI)-oxoanions in real-field samples like food and industrial water: experimental and theoretical insights

We report the luminescence-based detection of Group-1 carcinogen formaldehyde (FA) and Cr(VI)-oxoanions with a mesoporous Mn(II)-MOF (1), featuring a uninodal 4-c net topology and linear 1D square channels forming a polymeric 2D network. The Mn-MOF i.e., [Mn(phen)(hia)(H2O)]∞ was solvothermally constructed using π-conjugated, chelating phenanthroline (phen) and µ3-η2:η1 binding 5-hydroxyisophthalic acid (hia) ligands. The 2D rod-like crystallites of 1 demonstrated excellent phase purity, high thermal and photostability, and robustness under harsh conditions. The SCXRD and XPS studies established the structural framework and elemental composition, while the Hirshfeld surface analysis and NCI-RDG plot confirmed the presence of π-π stacking and weak interactions in 1. We explored the bright-blue emission of 1 for recyclable and fast-responsive (∼70 s) 'turn-off' detection of FA, with a low limit of detection (LOD) of 8.49 µM. Based on this, a 04-input-03-output molecular logic gate was proposed, which can be useful as a molecular switch for future applications. Furthermore, a unique experimental setup using the MOF film demonstrated ∼57% quenching upon exposure to FA vapor (an indoor VOC). Additionally, 1 exemplified itself as an efficient probe towards Cr(VI)-oxyanions, depicting LODs of 79 and 170 ppb, Stern-Volmer constants (KSV) of 16.13 × 104 and 12.73 × 104 M-1, and response times of ∼48 and ∼40 s for CrO42- and Cr2O72-, respectively. DFT calculations and specific wet-chemical investigations elucidated the FA detection to be triggered by photo-induced electron transfer (PET), while the Cr(VI)-sensing involved a combination of PET, the inner-filter effect (IFE), resonance energy transfer (RET), and electrostatic H-bonding interactions. The FA detection was validated using food samples (fish and meat) and wastewater specimens, achieving excellent recovery rates of ∼92-95%. Furthermore, the MOF's efficacy in recognizing the Cr(VI)-species in complex matrices (coal mine wastewater, sewage, and tap water) was investigated to yield high KSV values (3.10-5.17 × 104 and 2.16-7.03 × 104 M-1 for CrO42- and Cr2O72-), which demonstrated the probe's consistency and reliability.

Using eugenol scaffold to explore the explosive sensing properties of Cd(II)-based coordination polymers: experimental studies and real sample analysis

Eugenol, the major constituent of clove oil, has been explored as an essential natural ingredient for ages owing to its versatile pharmacological properties. However, to date, the coordination chemistry of eugenol derivatives has not been much explored. In the present work, an eugenol-based Schiff base ligand (HL) was synthesized and structurally confirmed through ESI-MS, NMR, and FT-IR spectroscopy studies. Consequently, the N,O-donor chelating ligand HL was coordinated with Cd2+, in the presence of bridging pseudohalides (thiocyanate, SCN-, and dicyanamide, N(CN)2-) to synthesize two luminescent coordination polymers (CPs 1 and 2): [Cd2(L)2(X)2]n (where HL = 4-allyl-2-(((2-(benzylamino)ethyl) imino)methyl)-6-methoxyphenol and Xs are bridging pseudohalides, i.e., SCN- and N(CN)2-) on a Cd-eugenol scaffold. The CPs depicted structural diversity, bulk-phase purity, thermal stability, and the presence of interlayer supramolecular C-H⋯π interactions together with C-H⋯S (for CP 1) and C-H⋯N (for CP 2) interactions. The CPs further exemplified themselves as selective and sensitive 'turn-off' probes towards trinitrophenol (TNP) (quenching efficiency: 82.02% and 83.86% for 1 and 2) among a pool of hazardous nitroaromatic compounds (NACs). Accordingly, 1 and 2 exhibited an ultralow limit of detection (LOD) of 0.29 and 0.15 μM, with high quenching constants (KSV) of 5.91 × 104 and 17.60 × 104 M-1, respectively. In addition, TNP sensing events were evidenced to be recyclable and exhibited fast response (∼31 s, 1, and ∼40 s, 2), which increased its real-world viability. Vapor phase TNP sensing was also accomplished upon drop-casted CP films. Experimental investigations and theoretical DFT study confirmed the cooperative occurrence of RET-IFE-PET-collisional quenching and non-covalent π⋯π stacking as key factors involved in the TNP sensing performance. The competency of 1 and 2 in the detection of TNP from several complex environmental matrices (CEMs), viz. matchstick powder, river and sewage water, and soil specimens, was also established with good recovery (∼66-86% and ∼68-93% for 1 and 2, respectively) and high KSV values (3.90-11.39 × 104 and 6.17-18.79 × 104 M-1 for 1 and 2, respectively).

Imidazole Compounds: Synthesis, Characterization and Application in Optical Analysis

Imidazole is a five-membered heterocyclic ring containing three carbon atoms, two nitrogen atoms, and two double bonds. Among two nitrogen atoms, one of which carries with a hydrogen atom is a pyrrole-type nitrogen atom, another is a pyridine type nitrogen atom. Hence, the imidazole ring belongs to the π electron-rich aromatic ring and can accept strong suction to the electronic group. Moreover, the nitrogen atom of the imidazole ring is coordinated with metal ions to form metal-organic frameworks. In recent years, because of imidazole compounds' unique optical properties, their applications have attracted more and more attention in optical analysis. Thus, this review has summarized the synthesis, characterization, and application with emphasis on the research progress of imidazole compounds in optical analysis, including fluorescence probe, colorimetric probe, electrochemiluminescence sensor, fiber optical sensor, surface plasmon resonance, etc. This paper will suggest the direction for the development of imidazole-containing sensors with high sensitivity and selectivity.

Mixed N,O-donor Directed Blue Emissive Nano-dispersed Mesoporous Mn(II)-MOF: Dual Sensing Probe for Recyclable and Ultrasensitive ppb-Level Recognition of TNP and Cr(VI)-Oxoanions

A new mesoporous Mn(II)-MOF [Mn2(phen)2(nia)2]∞ with 4-c uninodal net topology and reiterating rectangular channels in its cargo-net like extension was synthesized using π-conjugated phenanthroline (phen) and syn-syn bridging 5-nitroisopthalic acid (nia) linkers. The MOF (1) exhibited phase purity, uniform morphology, photo and thermal stability, and robustness; duly triggered by the exceptional framework rigidity via intermolecular H-bonding and interlayer π-π stacking interactions. The bright-blue luminescence of the MOF nano-dispersion was explored for sensitive, specific and ultrafast detection of trinitrophenol (TNP) with extremely low LOD (90.62 nM), high KSV (18.27×104 M-1) and Kq (4×1014 M-1s-1). The vapor-phase TNP sensing was also accomplished. Additionally, 1 served towards discriminatory, aqueous-phase monitoring of Cr(VI)-oxoanions, depicting LODs: 36.08 and 35.70 ppb; KSV: 3.46×104 and 4.87×104 M-1; Kq: 3.26×1013 M-1s-1 and 4.31×1013 M-1s-1; and response time: 32 and 40s for CrO4 2- and Cr2O7 2- respectively. The quenching mechanisms (i. e., RET, PET, IFE, weak interactions, collisional quenching and π⋅⋅⋅π stacking) was explained from several experimental investigations and theoretical DFT calculations. The recyclable sensing events and quantification from complex environmental matrices with admirable recovery rates and high KSV (13.02-22.44×104; ~6.31-10.98×104 and ~6.60-11.42×104 M-1 for TNP, CrO4 2- and Cr2O7 2-) undoubtedly advocated the consistency of the probe.

A fluorescent MOF and its synthesized MOF@cotton composite: Ratiometric sensing of vitamin B2 and antibiotic drug molecule

Here, we demonstrated the synthesis of a zinc based luminescent MOF, 1 (NDC = 2,6- naphthalenedicarboxylate) for the ratiometric detection of biomarker riboflavin (RBF; vitamin B2) in water dispersed medium. Further, this MOF detected two other antibiotic drug molecules, nitrofurantoin (NFT) and nitrofurazone (NZF). The detection of these analytes is very quick (∼seconds), and the limit of detection (LOD) for RBF, NZF and NFT are calculated as 16.58 ppm, 47.63 ppb and 56.96 ppb, respectively. The detection of these analytes was also comprehended by solid, solution, cost-effective paper strip method i.e., triphasic identification capabilities. The sensor is reusable without losing its detection efficacy. The sensor further showed the recognition abilities of these antibiotics in real field samples (river water, urine and tablet) and RBF in vitamin B2 pills and food samples (milk and cold drinks). The sensing merit of 1 urged us to fabricate of 1@cotton fabric composite, which exhibited the colorimetric detection of these analytes. In-depth experimental analysis suggested that the occurrence of photo-induced electron transfer (PET), fluorescence resonance energy transfer (FRET), and the inner filter effect (IFE) are the possible sensing mechanisms for the recognition of the antibiotics drug. The FRET mechanism is responsible for the recognition of RBF. The sensing mechanism is further supported by the theoretical analysis and the excited lifetime measurement.

Fluorescent MOF and Its Gel Composite for the Fluorescence Recovery "Turn-On" Detection of Al3+ Ions and "Turn-Off" Detection of Oxo-Anions

The exploration of smart sensors is of great significance for the selectivity, sensitivity, and ability to show the low detection limit for the target analyte. Here, we have used the linker H2L (5-((anthracen-9-ylmethyl)amino)isophthalic acid) for the construction of {[Cd(L)(DMF)(H2O)2]·H2O}n (1) which is in order with the chromophore anthracene moiety and the free -NH functionality as a guest interaction site. This framework showed the luminescence recovery "turn-on" detection of the Al3+ ion in an aqueous solution. An exhaustive mechanism study disclosed that the Lewis acid-base-type interaction between the Al3+ ion and the -NH functionality of the linker in the framework revealed that the absorbance caused an enhancement for the "turn-on" sensing event. Besides the "turn-on" sensing event, the "turn-off" sensing phenomenon of 1 is also noticed when it detects the hazardous oxo-anions (MnO4- and CrO42-) with limit of detection values of 17.08 and 19.91 ppb, respectively. The detection of these diverse analytes are very fast (10 s) and they can also be recognized through a colorimetric response. The sensing mechanisms for these analytes are established by photoinduced electron transfer, Forster resonance energy transfer, and inert filter effect along with theoretical investigation. Furthermore, to show the sensing application of 1 in a versatile podium, a MOF gel composite, 1@AA (AA = Agar-Agar), was developed from 1 with AA. Interestingly, 1@AA showed the colorimetric detection of these analytes under UV light. Therefore, sensor 1 behaves as a smart sensory material for the recognition of the above analytes through a simultaneous "turn-on" and "turn-off" effect.

Water-stable metal-organic frameworks (MOFs): rational construction and carbon dioxide capture

Metal-organic frameworks (MOFs) are considered to be a promising porous material due to their excellent porosity and chemical tailorability. However, due to the relatively weak strength of coordination bonds, the stability (e.g., water stability) of MOFs is usually poor, which severely inhibits their practical applications. To prepare water-stable MOFs, several important strategies such as increasing the bonding strength of building units and introducing hydrophobic units have been proposed, and many MOFs with excellent water stability have been prepared. Carbon dioxide not only causes a range of climate and health problems but also is a by-product of some important chemicals (e.g., natural gas). Due to their excellent adsorption performances, MOFs are considered as a promising adsorbent that can capture carbon dioxide efficiently and energetically, and many water-stable MOFs have been used to capture carbon dioxide in various scenarios, including flue gas decarbonization, direct air capture, and purified crude natural gas. In this review, we first introduce the design and synthesis of water-stable MOFs and then describe their applications in carbon dioxide capture, and finally provide some personal comments on the challenges facing these areas.

A dual-emitting Rhodamine B-encapsulated Zn-based MOF for the selective sensing of Chromium(VI)

A Rhodamine B-Zn-MOF composite (RhB-Zn-MOF) with dual emission intensity was synthesized through one pot synthesis by in-situ encapsulation of Rhodamine-B dye on a new Zn-MOF metal-organic framework [(Zn(OAc)2(4-BrIPh) (1,10-phenonthroline)(H2O)].H2O, (4-BrIPh = 4-Bromoisophthalic acid). The synthesized encapsulated material was characterized by elemental analysis, FTIR, UV-Visible spectroscopy, TGA, single crystal and powder X-ray diffraction and photoluminescence spectroscopy. The results showed that the synthesized composite, RhB-Zn-MOF could be used as an efficient probe for the selective sensing of Cr(VI) in the presence of Cr(III) as well as other metal ions.

Sensitive fluorescent detection of phosmet and chlortetracycline in animal-derived food samples based on a water-stable Cd(II) chain-based zwitterionic metal-organic framework

The residues of pesticides and antibiotics have always been a major concern in agriculture and food safety. In order to provide a new method for the rapid detection of organophosphorus pesticides and antibiotics, a novel Cd(II) chain-based zwitterionic metal-organic framework MOF 1 with high sensitivity fluorescence sensing performance was successfully synthesized. A series of researches showed that the water- and pH-stable bifunctional MOF 1 has a great ability to detect phosmet (PSM) and chlortetracycline (CTC) in water through fluorescence quenching effect, with high detection sensitivity, low detection limits (0.0124 μM and 0.0131 μM), short response time (40 s) and reusability. Practical application results revealed that MOF 1 could detect PSM and CTC in milk, beef, chicken and egg samples, with satisfactory recoveries (95.2%-103.7%). As a novel fluorescence probe, MOF 1, is known the first case that can detect PSM in animal-derived samples, and the first dual-function material capable of detecting PSM and CTC. Mechanism studies displayed that competitive absorption and photoinduced electron transfer clearly authenticate the high quenching performance of the material.

A Water-Stable Cationic SIFSIX MOF for Luminescent Probing of Cr2 O7 2- via Single-Crystal to Single-Crystal Transformation

The sensing and monitoring of toxic oxo-anion contaminants in water are of significant importance to biological and environmental systems. A rare hydro-stable SIFSIX metal-organic framework, SiF6 @MOF-1, {[Cu(L)2 (H2 O)2 ]·(SiF6 )(H2 O)}n , with exchangeable SiF6 2- anion in its pore is strategically designed and synthesized, exhibiting selective detection of toxic Cr2 O7 2- oxo-anion in an aqueous medium having high sensitivity, selectivity, and recyclability through fluorescence quenching phenomena. More importantly, the recognition and ion exchange mechanism is unveiled through the rarely explored single-crystal-to-single crystal (SC-SC) fashion with well-resolved structures. A thorough SC-SC study with interfering anions (Cl- , F- , I- , NO3 - , HCO3 - , SO4 2- , SCN- , IO3 - ) revealed no such transformations to take place, as per line with quenching studies. Density functional theory calculations revealed that despite a lesser binding affinity, Cr2 O7 2- shows strong orbital mixing and large driving forces for electron transfer than SiF6 2- , and thus enlightens the fluorescence quenching mechanism. This work inaugurates the usage of a SIFSIX MOF toward sensing application domain under aqueous medium where hydrolytic stability is a prime concern for their plausible implementation as sensor materials.

Synthesis, Structural Versatility, Magnetic Properties, and I- Adsorption in a Series of Cobalt(II) Metal-Organic Frameworks with a Charge-Neutral Aliphatic (O,O)-Donor Bridge

Four new metal-organic frameworks based on cobalt(II) salts and 1,4-diazabicyclo[2.2.2]octane N,N'-dioxide (odabco) were obtained. Their crystallographic formulae are [Co3(odabco)2(OAc)6] (1, OAc- = acetate), [Co(H2O)2(HCOO)2]·odabco (2), [Co2(H2O)(NO3)(odabco)5](NO3)3·3.65H2O (3), and [Co2(DMF)2(odabco)4](NO3)4·3H2O (4; DMF = N,N-dimethylformamide). Crystal structures of 1-4 were determined by single-crystal X-ray crystallography. Coordination polymer 1 comprises binuclear and mononuclear metal-acetate blocks alternating within uncharged one-dimensional chains, in which odabco acts as a bridging ligand. A layered Co(II) formate 2 contains odabco only as guest molecules located in the interlayer space. Layered compound 3 and three-dimensional 4 have cationic coordination frameworks with 26% and 34% specific void volumes, respectively, unveiling high structural diversity of Co(II)-odabco MOFs based on quite a rare aliphatic moiety. Magnetization measurements were performed for 1, 3, and 4 and the obtained data were interpreted on the basis of their crystal structures. A strong (J/kB~100 K) antiferromagnetic coupling was found within binuclear metal blocks in 1. Ion exchange experiments revealed a considerable iodide uptake by 3 resulting in an up to 75% guest nitrate substitution within the voids of a coordination framework, found by capillary zone electrophoresis data and confirmed by single-crystal XRD. A preservation of 3 crystallinity during the exchange allowed for the guest I- positions within a new adduct with the formula [Co2(H2O)(NO3)(odabco)5]I2(NO3)·1.85H2O (3-I) to be successfully determined and the odabco aliphatic core to be revealed as a main adsorption center for quite large and easily polarizable iodide anions. In summary, this work presents a comprehensive study for a series of 1,4-diazabicyclo[2.2.2]octane N,N'-dioxide-based MOFs of cobalt(II) within the framework of magnetic properties and reports the first example of anion exchange in odabco-based coordination networks, supported by direct X-ray structural data. The reported results unveil promising applications of such frameworks bearing ligands with an aliphatic core in the diverse structural design of selective adsorbents and other types of functional materials.

Reticular Chemistry for Optical Sensing of Anions

In the last few decades, reticular chemistry has grown significantly as a field of porous crystalline molecular materials. Scientists have attempted to create the ideal platform for analyzing distinct anions based on optical sensing techniques (chromogenic and fluorogenic) by assembling different metal-containing units with suitable organic linking molecules and different organic molecules to produce crystalline porous materials. This study presents novel platforms for anion recognition based on reticular chemistry with high selectivity, sensitivity, electronic tunability, structural recognition, strong emission, and thermal and chemical stability. The key materials for reticular chemistry, Metal-Organic Frameworks (MOFs), Zeolitic Imidazolate Frameworks (ZIFs), and Covalent-Organic Frameworks (COFs), and the pre- and post-synthetic modification of the linkers and the metal oxide clusters for the selective detection of the anions, have been discussed. The mechanisms involved in sensing are also discussed.

Coordination Unsaturation and Basic Site-Immobilized Nanochannel in a Chemorobust MOF for 3-Fold-Increased High-Temperature Selectivity and Fixation of CO2 under Mild Conditions with Nanomolar Recognition of Roxarsone

A multifaceted metal-organic framework (MOF) with task-specific site-engineered pores can promise high-temperature and moisture-tolerant capture and non-redox fixation of CO2 under mild conditions as well as ultrasensitive detection of carcinogenic contaminants in water. Herein, we report a pillar-bilayered MOF that holds a nanochannel with contrasting functionalities for both these sustainable applications with improved performance characteristics. The twofold entangled robust framework exhibits CO2 adsorption at elevated temperatures with considerable MOF-gas interaction. Interestingly, CO2 selectivity unveils nearly a 3-fold improvement upon the rise of temperature, affording a CO2/N2 value of 820 at 313 K, which outperforms many porous adsorbents. Additionally, breakthrough simulation establishes complete separation and attests the potential of this MOF in the separation of flue gas mixture. Importantly, minor CO2 loss during multiple capture-release cycles and under a relative humidity of 75% promise practical usability of the material. Density functional theory (DFT) not only portrays the atomistic level snapshots of temperature-triggered CO2 inclusion inside this microporous vessel alongside the role of diverse CO2-philic sites but also validates the basis of N2-phobicity of an azo-functionalized linker on such increased selectivity. The guest-free MOF further demonstrates non-redox and recyclable CO2 fixation with wide epoxide tolerance under solvent-free mild conditions and even works at atmospheric pressure and room temperature. The crucial roles of high-density acid-base sites in both adsorption and catalysis are supported by control experiments and by comparing the activity of an unfunctionalized MOF. The hydrolytic stability and strong luminescence signature benefit the framework in aqueous-phase selective and fast responsive detection of detrimental roxarsone (ROX) with high quenching (7.56 × 104 M-1) and very low sensitivity (68 nM). Apart from varying degrees of an energy-transfer mechanism, the fluorosensing of ROX is comprehensively supported by in-depth DFT studies that manifest alteration of MOF energy levels in the presence of organoarsenic compounds and depict MOF-analyte supramolecular interactions.

A Zn(II) coordination polymer as a dual sensor for ppb level detection of antibiotics and organo-toxins in a green solvent

Herein, we describe the synthesis of a new fluorescent d¹⁰ coordination polymer, [Zn₂(CFDA)₂(BPEP)]_n·nDMF (CP-1) under solvothermal reaction condition using zinc metal ion. In CP-1, Zn(II) ion along with CFDA and BPED ligand forms a 2-fold self-interpenetrated 3D coordination polymers. This CP-1 is characterized by the single crystal X-ray diffraction (SCXRD), powder X-ray diffraction (PXRD), infrared spectra, optical microscope image and thermogravimetric analysis and the framework is found to maintain its structural stability in different solvents. The framework (CP-1) detected antibiotics (NFT (nitrofurantoin) and NZF (nitrofurazone)) and organo-toxin trinitrophenol in aqueous dispersed medium. Apart from the fast responsive (10 s), the detection limit for them was found at ppb level. The detection of these organo-aromatics were also comprehended by the colorimetric response through solid, solution and low cost paper strip technique i.e., triple mode recognition capability. The probe is re-usable without changing in its sensing efficiency and in addition, it has been applied for the detection of these analytes in the real field specimens (soil, river water, human urine and commercial tablet). The sensing ability is established by in-depth experimental analysis and the life time measurement where mechanism such as photo induced electron transfer (PET), fluorescence resonance energy transfer (FRET), inner filter effect (IFE) was recognized. The presence of guest interaction sites on the linker backbone in CP-1 induces diverse supramolecular interaction with the targeted analytes results to bring them in proximity for the occurrence of these sensing mechanism. The Stern-Volmer quenching constant values of CP-1 for the targeted analytes are admirable and the low detection limit (LOD) values for NFT, NZF and TNP are found to be 34.54, 67.79 and 43.93 ppb respectively. Further, the DFT theory is carried out in details to justify the sensing mechanism.

Tactile Sensors: Hydroxyl Decorated Silver Metal-Organic Frameworks for Detecting Cr2O72-, MnO4-, Humic Acid, and Fe3+ Ions

Anionic, acidic, and metal ions are common contaminants in water and cause serious concerns for human and aquatic life. With the goal of rapid detection of analytes, we herein design a new array of ligand 5-(4H-1,2,4-triazol-4-yl)pyridin-3-ol-linked silver coordinated metal-organic frameworks Ag-MOFs as a promising sensor for Cr₂O₇^2-, MnO₄^-, humic acid (HA), and Fe³⁺ ions down to the micro level. Furthermore, as evidenced by luminescence, excitation-emission matrix (EEM) spectroscopic, and PXRD measurements, designed metal-organic frameworks (MOFs) can be fast, stable, and reusable for analyte detection in water.

Largely Entangled Diamondoid Framework with High-Density Urea and Divergent Metal Nodes for Selective Scavenging of CO2 and Molecular Dimension-Mediated Size-Exclusive H-Bond Donor Catalysis

Pore environment modulation with high-density polarizing groups in metal-organic frameworks (MOFs) can effectively accomplish selective and multicyclic carbon dioxide (CO₂) adsorption, whereas the incorporation of task-specific organic sites inside these porous vessels promise to evade self-quenching, solubility, and recyclability issues in hydrogen-bond donating (HBD) catalysis. However, concurrent amalgamation of both these attributes over a single platform is rare but extremely demanding in view of sustainable applications. We designed a robust diamondoid framework CSMCRI-17 (CSMCRI = Central Salt and Marine Chemicals Research Institute) from the mixed-ligand assembly of azo group-containing dicarboxylate ligand, urea-functionalized pyridyl linker, and Zn(II) nodes with specific divergent coordination. Seven-fold interpenetration to the microporous structure largely augments N-rich functionality that facilitates high CO₂ uptake in the activated form (17a) with good CO₂ selectivity over N₂ and CH₄ that outperform many reported materials. The framework displays very strong CO₂ affinity and no reduction in adsorption capacity over multiple uptake-release cycles. Benefitting from the pore-wall decoration with urea functionality from the pillaring strut, 17a further demonstrates hydrogen-bond-mediated Friedel-Crafts alkylation of indole with β-nitrostyrene under mild conditions, with multicyclic usability and excellent reactivity toward wide ranges of substituted nucleophiles and electrophiles. Interestingly, interpenetration-generated optimum-sized pores induce poor conversion to sterically encumbered substrate via molecular dimension-mediated size selectivity that is alternatively ascribed from additional control experiments and support the occurrence of HBD reaction within the MOF cavity. The catalytic path is detailed in light of the change of emission intensity of the framework by the electrophile as well as the judicious choice of the substrate, which authenticates the prime role of urea moiety-governed two-point hydrogen bonding.

Exploring novel heterojunctions based on the cerium metal-organic framework family and CAU-1, as dissimilar structures, for the sake of photocatalytic activity enhancement

Ce-based metal-organic frameworks (Ce-MOFs) are excellent photocatalysts due to their high efficiency in charge transportation. The integration of this family with CAU-1 (CAU standing for Christian-Albrechts-University), as a MOF benefiting from its ultra-high surface area, can remarkably enhance the properties of the structure. This research includes four new heterojunctions, namely CAU-1/Ce-BDC-NH2, CAU-1/Ce-UiO-66, CAU-1/Ce-MOF-808, and CAU-1/Ce-BDC, prepared by an innovative method, and several characterization techniques were employed to study the structural features of the frameworks. Their high surface area and low bandgap energy seemed appropriate for catalytic applications. Therefore, CAU-1/Ce-BDC was chosen for the photocatalytic removal of Cr(vi), a dangerous heavy metal, from aqueous systems. According to the results, a 96% reduction of Cr(vi) to Cr(iii) within 75 min was observed, and the catalyst retained its stability after four runs of reactions under acidic conditions.

Highly Luminescent MOF and Its In Situ Fabricated Sustainable Corn Starch Gel Composite as a Fluoro-Switchable Reversible Sensor Triggered by Antibiotics and Oxo-Anions

Frequent use of antibiotics and the growth of industry lead to the pollution of several natural resources which is one of the major consequences for fatality to human health. Exploration of smart sensing materials is highly anticipated for ultrasensitive detection of those hazardous organics. The robust porous hydrogen bonded network encompassing a free-NH₂ moiety, Zn(II)-based metal-organic framework (MOF) (1), is used for the selective detection of antibiotics and toxic oxo-anions at the ppb level. The framework is able to detect the electronically dissimilar antibiotic sulfadiazine and nitrofurazone via fluorescence "turn-on" and "turn-off" processes, respectively. The antibiotic-triggered reversible fluoro-switching phenomena (fluorescence "on-off-on") are also observed by using the fluorimetric method. An extensive theoretical investigation was performed to establish the fluoro-switching response of 1, triggered by a class of antibiotics and also the sensing of oxo-anions. This investigation reveals that the interchange of the HOMO-LUMO energy levels of fluorophore and analytes is responsible for such a fluoro-switchable sensing activity. Sensor 1 showed the versatile detection ability which is reflected by the detection of a carcinogenic nitro-group-containing drug "roxarsone". In view of the sustainable environment along with quick-responsive merit of 1, an in situ MOF gel composite (1@CS; CS = corn starch) is prepared using 1 and CS due to its useful potential features such as biocompatibility, toxicologically innocuous, good flexibility, and low commercial price. The MOF composite exhibited visual detection of the above analytes as well as antibiotic-triggered reversible fluoro-switchable colorimetric "on-off-on" response. Therefore, 1@CS represents a promising smart sensing material for monitoring of the antibiotics and oxo-anions, particularly appropriate for the real-field analysis of carcinogenic drug molecule "roxarsone" in food specimens.

Brønsted Acid-Functionalized Ionic Co(II) Framework: A Tailored Vessel for Electrocatalytic Oxygen Evolution and Size-Exclusive Optical Speciation of Biothiols

Metal-organic frameworks (MOFs) not only combine globally demanded renewable energy generation and environmental remediation onto a single platform but also rationalize structure-performance synergies to devise smarter materials with remarkable performance. The robust and non-interpenetrated cationic MOF exemplifies a unique bifunctional scaffold for the efficient electrochemical oxygen evolution reaction (OER) and ultrasensitive monitoring of biohazards. The microporous framework containing Brønsted acid-functionalized [Co₂(μ₂-OH)(CO₂)₂] secondary building units (SBUs) exhibits remarkable OER performance in 1 M KOH, requiring 410 mV overpotential to obtain 10 mA cm^-2 anodic current density, and a low Tafel slope of 55 mV/dec with 93.1% Faradaic efficiency. Apart from the high turnover frequency and electrochemically assessable surface area, steady OER performance over 500 cycles under potentiodynamic and potentiostatic conditions result in long-term catalyst durability. The highly emissive attribute from nitrogen-rich fluorescent struts benefits the MOF in recyclable and selective fluoro-detection of three biothiols (l-cysteine, homocysteine, and glutathione) in water with a fast response time. In addition to colorimetric monitoring in the solid and solution phases, control experiments validate size-exclusive biothiol speciation through molecular-dimension-mediated pore diffusion. The role of SBUs in the OER mechanism is detailed from density functional theory-derived free energy analysis, which also validates the importance of accessible N-sites in sensing via portraying framework-analyte supramolecular interactions.

Highly regenerative, fast colorimetric response for organo-toxin and oxo-anions in an aqueous medium using a discrete luminescent Cd(II) complex in a heterogeneous manner with theoretical revelation

The highly luminescent complex [CdQ₂(H₂O)₂] (1) shows ultra-selectivity and high sensitivity to the explosive organo-toxin trinitrophenol (TNP). This detection is extremely fast with a high quenching constant (5.3 × 10⁴ M^-1) and a very low limit of detection (LOD) of 137 nM/59 ppb. This motivated us to detect the lethal carcinogenic arsenical drug roxarsone (ROX), which is reported here for the first time. The quenching constant and LOD for ROX using 1 were found to be 4.9 × 10⁴ M^-1 and 86 nM (or 37 ppb), respectively. Moreover, the probe also recognizes three lethal toxic oxo-anions (MnO₄^-, Cr₂O₇^2- and CrO₄^2-) with outstanding quenching constant (2.2 × 10⁴ M^-1, 1.4 × 10⁴ M^-1 and 1.1 × 10⁴ M^-1) and very low LODs (141 nM/61 ppb, 178 nM/78 ppb and 219 nM/95 ppb). Compared to the previously reported homogeneous sensing nature of the discrete complexes, our complex showed the detection of toxic pollutants in a heterogeneous manner, which results in high recyclability and hence multi-cycle sensing capability. Interestingly, 1 shows the possibility for real-time monitoring through naked eye detection by visible colorimetric changes in solid, solution and strip paper methods, i.e., triphasic detection ability. In addition, the sensor also exhibited the cross-sensing ability for these pollutants. The experimental sensing mechanism is strongly supported by the exhaustive theoretical investigation. Based on the fluorescence signal shown by each analyte, an integrated AND-OR logic gate is constructed. Furthermore, the sensing ability of 1 remains intact towards the detection of versatile real field samples including lethal carcinogenic arsenical drug roxarsone in the real food sample.

Two bis-ligand-coordinated Zn(ii)-MOFs for luminescent sensing of ions, antibiotics and pesticides in aqueous solutions

Two organometallic complexes with two and three-dimensional architectures were constructed by using multiple ligands and Zn(ii) ions: [Zn3(BTC)2(DTP)4(H2O)2]·(H2O)4 (Zn-1) (BTC = benzene-1,3,5-tricarboxylic acid and DTP = 3,5-di(1,2,4-triazol-1-yl)pyridine) and [Zn2(NTD)2(DTP)] (Zn-2) (NTD = 1,4-naphthalenedicarboxylic acid). The as-prepared complexes were characterized by single-crystal X-ray diffraction (SCXRD), elemental analysis, powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and fluorescence analysis. Fluorescence sensing tests revealed that the two complexes are effective, sensitive and selective toward cationic Fe3+ and anionic MnO4 - and Cr2O7 2-. During the antibiotic sensing process, cefixime (CFX) for Zn-1 and nitrofurantoin (NFT) for Zn-2 exhibited the highest quenching efficiencies. For sensing pesticides, the highest quenching efficiencies were exhibited by imidacloprid (IMI) toward Zn-1 and Zn-2. The fluorescence quenching of the complexes that was induced by antibiotics, pesticides and MnO4 - was attributed to both the inner filter effect (IFE) and the fluorescence resonance energy transfer (FRET) effect.

Fabricated Metal-Organic Frameworks (MOFs) as luminescent and electrochemical biosensors for cancer biomarkers detection

In the health domain, a major challenge is the detection of diseases using rapid and cost-effective techniques. Most of the existing cancer detection methods show poor sensitivity and selectivity and are time consuming with high cost. To overcome this challenge, we analyzed porous fabricated metal-organic frameworks (MOFs) that have better structures and porosities for enhanced biomarker sensing. Here, we summarize the use of fabricated MOF luminescence and electrochemical sensors in devices for cancer biomarker detection. Various strategies of fabrication and the role of fabricated materials in sensing cancer biomarkers have been studied and described. The structural properties, sensing mechanisms, roles of noncovalent interactions, limits of detection, modeling, advantages, and limitations of MOF sensors have been well-discussed. The study presents an innovative technique to detect the cancer biomarkers by the use of luminescence and electrochemical MOF sensors. In addition, the potential association studies have been opening the way for personalized patient treatments and the development of new cancer-detecting devices.

A new visual and stable fluorescent Cu-MOF as a dual-function sensor for glyphosate and Cr2O72−

A new visual and stable Cu-MOF as a dual-function sensor with high sensitivity for the detection of glyphosate and Cr2O72−.

Stabilization of CO2 as Zwitterionic Carbamate within a Coordination Polymer (CP): Synthesis, Structure and Anions Sensing Behaviour of Tb-CP composite

A new gadolinium (III) based coordination polymer (CP), [Gd(3,5-pydc)1.5(CO2)0.5(H2O)4].3H2O (where 3,5-pydc =3,5-pyridinedicarboxylate) , 1, has been successfully synthesized using slow diffusion method at room temperature. Single crystal X-ray diffraction study...

A Ni-MOF based luminescent sensor for selective and rapid sensing of Fe(ii) and Fe(iii) ions

In this work, a bis(N,N-trimellitoyl)-4,4′-oxydianiline linker was synthesized and characterized by spectroscopic techniques. The molecular structure and luminescence intensity of the Ni-MOF treated with different metal ions were investigated.

Construction of two novel non-penetrating Co-MOFs derived from designed 2,4,6-tri(2,4-dicarboxyphenyl) pyridine: synthesis, structure and gas adsorption properties

The strategy of extending ligands and reducing symmetry provide a facile access to obtain a wide variety of linkers for the construction of MOFs bearing diverse structures and intriguing properties....

A multifunctional fluorescent Cd-MOF probe: its synthesis, structure, and sensing properties

A Cd-MOF with a one-dimensional cavity can be used as a multifunctional fluorescent probe to effectively recognize CrO42− and Cr2O72− ions, Fe3+ ions and TNP molecules.

Metal–organic frameworks (MOFs) as fluorescence sensors: principles, development and prospects

This review classifies the latest developments of MOF-based fluorescence sensors according to the analytes, and discusses the challenges faced by MOF-based fluorescence sensors and promotes some directions for future research.

Intrinsic-Unsaturation-Enriched Biporous and Chemorobust Cu(II) Framework for Efficient Catalytic CO2 Fixation and Pore-Fitting Actuated Size-Exclusive Hantzsch Condensation with Mechanistic Validation

Carbon dioxide (CO₂) utilization and one-pot Hantzsch condensation denote two important protocols pertinent to sustainable agenda because of the obvious advantages like reduction in chemical usage, short reaction time, and minimum waste generation. To this end, the astute combination of optimum-sized pore structure with built-in Lewis acid center in metal-organic frameworks (MOFs) can bring about such reactions under energetically favorable conditions and offer a step forward to size-exclusive catalysis. The chemoresistant and twofold interpenetrated Cu(II) framework CSMCRI-13 (CSMCRI = Central Salt & Marine Chemicals Research Institute) is built from a C₃-symmetric tricarboxylate ligand and an N,N'-donor linker that undergo incisive amalgamation of the paddle-wheel [Cu₂(COO)₄] secondary building unit (SBU) and the intrinsically unsaturated Cu(II) node with four coordination. The microporous structure features a dual-pore containing cage-like network with free oxygen-atom-enriched cavities and exhibits appreciable CO₂ adsorption with moderate MOF-CO₂ interaction in activated form (13a). Benefitting from both, the coordinatively frustrated metal center containing MOF acts as a highly synergistic and solvent-free catalyst in CO₂ cycloaddition reaction under an 8 bar CO₂ pressure at 70 °C in 6 h. The catalyst furnished admirable reactivity and fair recyclability with a wide range of substrates, wherein sterically encumbered and long-chain epoxides produced poor conversion. This MOF further executes highly regenerable Hantzsch condensation reaction under mild condition with superior activity to contemporary materials, where most of the 1,4-dihydropyridine derivatives are additionally characterized through the single-crystal X-ray diffraction analysis. Importantly, mechanistic proof of the tricomponent condensation involving built-in Lewis acid sites is validated from several control experiments and in-depth analytical studies. To the best of the single-step multicomponent reaction, substrate molecules having incompatible molecular dimension to that of pore size of the framework resulted insignificant conversion and demonstrated the first-ever pore-fitting-induced size selectivity in Hantzsch condensation.

Advanced strategies in Metal-Organic Frameworks for CO2 Capture and Separation

The continuous carbon dioxide (CO₂ ) gas emissions associated with fossil fuel production, valorization, and utilization are serious challenges to the global environment. Therefore, several developments of CO₂ capture, separation, transportation, storage, and valorization have been explored. Consequently, we documented a comprehensive review of the most advanced strategies adopted in metal-organic frameworks (MOFs) for CO₂ capture and separation. The enhancements in CO₂ capture and separation are generally achieved due to the chemistry of MOFs by controlling pore window, pore size, open-metal sites, acidity, chemical doping, post or pre-synthetic modifications. The chemistry of defects engineering, breathing in MOFs, functionalization in MOFs, hydrophobicity, and topology are the salient advanced strategies, recently reported in MOFs for CO₂ capture and separation. Therefore, this review summarizes MOF materials' advancement explaining different strategies and their role in the CO₂ mitigations. The study also provided useful insights into key areas for further investigations.

N-alkylation briefly constructs tunable multifunctional sensor materials: Multianalyte detection and reversible adsorption

A series of N-alkyl-substituted polybenzimidazoles (SPBIs), synthesized by simple condensation and N-alkylation, act as functional materials with tunable microstructures and sensing performance. For their controllable morphologies, the formation of nano-/microspheres is observed at the n(RBr)/n(PBI) feed ratio of 5:1. Products with different degrees of alkylation can recognize metal ions and nitroaromatic compounds (NACs). For example, SPBI-c, obtained at the feed ratio of 1:1, can selectively detect Cu2+, Fe3+, and NACs. By contrast, SPBI-a, obtained at the feed ratio of 0.1:1, can exclusively detect Cu2+ with high sensitivity. Their sensing mechanisms have been studied by FT-IR spectroscopy, SEM, XPS, and DFT calculations. Interestingly, the SPBIs can adsorb Cu2+ in solution and show good recyclability. These results demonstrate that polymeric materials with both sensing and adsorption applications can be realized by regulating the alkylation extent of the main chain, thus providing a new approach for the facile synthesis of multifunctional materials.

A luminescent cationic MOF for bimodal recognition of chromium and arsenic based oxo-anions in water

Water pollution from heavy metals and their toxic oxo-anionic derivatives such as CrO42-, Cr2O72-, HAsO42-, and HAsO32- has become one of the most critical environmental issues. To address this, herein, we report a new hydrolytically stable luminescent Zn(ii) based cationic metal organic framework (MOF), iMOF-4C, which further successfully exhibited a rare dual "turn off/on" fluorescence response toward Cr(vi), As(v) and As(iii) based oxo-anions respectively in water medium. In addition, iMOF-4C was found to maintain its superior selectivity in the presence of other concurrent anions (e.g. SO42-, Cl-, Br-, ClO4-, NO3-, SCN- and CO32-). More importantly, iMOF-4C exhibited an excellent selective and sensitive luminescence "turn-off" response towards CrO42- and Cr2O72- anions in water medium with the quenching constant (Ksv) values as high as 1.31 × 105 M-1 (CrO42-) and 4.85 × 105 M-1 (Cr2O72-), which are found to be the highest among the values reported in the regime of MOFs. Interestingly, iMOF-4C showed fluorescence "turn-on" response toward HAsO42- and HAsO32- with an enhancement coefficient (Kec) of 1.98 × 104 M-1 and 3.56 × 103 M-1 respectively. The high sensitivity and low detection limits make iMOF-4C more feasible for real-time sensing of such toxic oxo-anions in an aqueous medium. Furthermore, the probable sensing mechanism has been investigated by DFT calculation studies and discussed in detail.

High-Performance Water Harvester Framework for Triphasic and Synchronous Detection of Assorted Organotoxins with Site-Memory-Reliant Security Encryption via pH-Triggered Fluoroswitching

Atmospheric water harvesting, triphasic detection of water contaminants, and advanced antiforgery measures are among important global agendas, where metal-organic frameworks (MOFs), as an incipient class of multifaceted materials, can affect substantial development of individual properties at the interface of tailor-made fabrication. The chemically robust and microporous MOF, encompassing contrasting pore functionalization, exhibits an S-shaped water adsorption curve at 300 K with a steep pore-filling step near P/P₀ = 0.5 and shows reversible uptake-release performance. Density functional theory (DFT) studies provide atomistic-level snapshots of sequential insertion of H₂O molecules inside the porous channels and also portray H-bonding interactions with polar functional sites in the two-fold interpenetrated structure. The highly emissive attribute with an electron-pull system benefits the fast-responsive framework and highly regenerable detection of four classes of organic pollutants (2,4,6-trinitrophenol (TNP), dichloran, aniline, and nicotine) in water at a record-low sensitivity. In addition to solid-, liquid-, and vapor-phase sensing, host-guest-mediated reversible fluoroswitching is validated through repetitive paper-strip monitoring and image-based detection of food sample contamination. Structure-property synergism in the electron transfer route of sensing is justified from DFT calculations that describe the reshuffling of molecular orbital energy levels in an electron-rich network by each organotoxin, besides evidencing framework-analyte supramolecular interactions. The MOF further delineates the pH-responsive luminescence defect repair via site-specific emission modulation, wherein reversibly alternated "encrypted and decrypted" states are utilized as highly reusable anticounterfeiting labels over multiple platforms and conceptualized as artificial molecular switches. Aiming at self-calibrated, advanced security claims, a NOR-OR coupled logic gate is devised based on commensurate fluorescence-cum-real-time synchronous detection of organic and inorganic (HCl and NH₃) pollutants.