Hydrogenation of CO2, Hydrogenocarbonate, and Carbonate to Formate in Water using Phosphine Free Bifunctional Iron Complexes

Diels-Alder Cycloaddition of Cyclopentadiene to C60 and Si60 and Their Endohedral Li+ Counterparts

Both silicon and carbon are elements located in group 14 on the periodic table. Despite some similarities between these two elements, differences in reactivity are important, and whereas carbon is a central element in all known forms of life, silicon is barely found in biological systems. Here, we investigate the Diels-Alder cycloaddition reaction of cyclopentadiene (CP) and cyclopentasildiene (CPSi) with fullerenes C60, Li+@C60, Si60, and Li+@Si60 using density functional theory methods. The results reveal distinct kinetic and thermodynamic trends that govern the reactivity and selectivity. For C60, the [6,6] pathway is kinetically and thermodynamically favored, whereas for Si60, the [5,6] pathway is preferred thermodynamically but not kinetically. The introduction of lithium cations increases the reactivity of both C60 and Si60. Energy decomposition analysis (EDA) unveils the importance of the components of the interaction energy between CPSi and the corresponding fullerenes. The findings provide insights into the interplay of electronic structure, substrate reactivity, and fullerene electrophilicity in cycloaddition reactions.

Nanoparticle-enabled integration of air capture and conversion of CO2

Integrating air capture and conversion of CO2 is key to realizing energy sustainability. However, current integration approaches require high temperature and pressure, making them energy intensive. Here, we demonstrate a nanoparticle (NP) catalysis approach for the hydrogenation of alkyl carbonate, an intermediate obtained from the CO2 capture process, to formate, achieving one-pot air capture and conversion of CO2 under ambient conditions. The capture is realized in an ethylene glycol (EG) solution of KOH (EG-KOH) at room temperature, where CO2 is selectively converted into HO-CH2CH2-O-COOK (∼100% conversion). This carbonate is then hydrogenated using ammonia borane (under ambient pressure and at 50 °C) to formate (HCOOK) (>90% yield) in the presence of a stable Pd NP catalyst with EG being regenerated. Atomistic simulations suggest that the CO2 absorption process in the EG-KOH solution is energetically stable, and the catalyst surface provides the reaction site to break the C-O bond in the -O-COOK structure, enabling the hydrogenation of the alkyl carbonate to formate and the regeneration of EG. Our study provides a promising NP-catalysis approach for air capture and conversion of CO2 into value-added chemicals/fuels under ambient conditions.

Molybdenum-catalyzed hydrogenation of carbon dioxide, bicarbonate, and inorganic carbonates to formates

Herein, we report the hydrogenation of carbon dioxide to sodium formate catalyzed by low-valent molybdenum phosphine complexes. The 1,3-bis(diphenylphosphino)propane (DPPP)-based Mo complex was found to be an efficient catalyst in the presence of NaOH affording formate with a TON of 975 at 130 °C in THF/H2O after 24 h utilizing 40 bar (CO2 : H2 = 10 : 30) pressure. The complex was also active in the hydrogenation of sodium bicarbonate and inorganic carbonates to the corresponding formates. Mechanistic investigation revealed that the reaction proceeded via an intermediate formato complex.

The superiority of Pd2+ in CO2 hydrogenation to formic acid

The hydrogenation of CO2 to formic acid is an essential subject since formic acid is a promising hydrogen storage material and a valuable commodity chemical. In this study, we report for the first time the hydrogenation of CO2 to formic acid catalyzed by a Pd2+ catalyst, Pd-V/AC-air. The catalyst exhibited extraordinary catalytic activity toward the hydrogenation of CO2 to formic acid. The TON and TOF are up to 4790 and 2825 h-1, respectively, representing the top level among reported heterogeneous Pd catalysts. By combining a study of first-principles density functional theory with experimental results, the superiority of Pd2+ over Pd0 was confirmed. Furthermore, the presence of V modified the electronic state of Pd2+, thus promoting the reaction. This study reports the effect of metal valence and electronic state on the catalytic performance for the first time and provides a new prospect for the design of an efficient heterogeneous catalyst for the hydrogenation of CO2 to formic acid.

Carbonate Hydrogenated to Formate in the Aqueous Phase over Nickel/TiO2 Catalysts

Carbonate hydrogenation to formate is a promising route to convert captured carbon dioxide into valuable chemicals, thus reducing carbon emissions and creating a revenue return. Developing inexpensive catalysts with high activity, selectivity, and stability remains challenging. We report a supported non-noble metal catalyst, Ni/TiO2 , with great selectivity over 96 % and excellent stability in catalyzing the conversion of carbonate into formate in aqueous solution. Ni0 and Ni2+ species are both observed in Ni/TiO2 catalysts, and the synergistic effect of these two Ni components leads to high activity and high selectivity of carbonate hydrogenation to formate.

Reaction and separation system for CO2 hydrogenation to formic acid catalyzed by iridium immobilized on solid phosphines under base-free condition

Hydrogenation of carbon dioxide (CO₂) to produce formic acid (HCOOH) in base-free condition can avoid waste producing and simplify product separation process. However, it remains a big challenge because of the unfavorable energy in both thermodynamics and dynamics. Herein, we report the selective and efficient hydrogenation of CO₂ to HCOOH under neutral conditions with imidazolium chloride ionic liquid as the solvent, catalyzed by a heterogeneous Ir/PPh₃ compound. The heterogeneous catalyst is more effective than the homogeneous one because it is inert in catalyzing the decomposition of product. A turnover number (TON) of 12700 can be achieved, and HCOOH with a purity of 99.5% can be isolated by distillation because of the non-volatility of the solvent. Both the catalyst and imidazolium chloride can be recycled at least 5 times with stable reactivity.

Adding Diversity to Diiron Aminocarbyne Complexes with Amine Ligands

The reactions of the diiron aminocarbyne complexes [Fe2Cp2(NCMe)(CO)(μ-CO){μ-CN(Me)(R)}]CF3SO3 (R = Me, 1aNCMe; R = Cy, 1bNCMe), freshly prepared from the tricarbonyl precursors 1a–b, with primary amines containing an additional function (i.e., alcohol or ether) proceeded with the replacement of the labile acetonitrile ligand and formation of [Fe2Cp2(NH2CH2CH2OR’)(CO)(μ-CO){μ-CN(Me)(R)}]CF3SO3 (R = Me, R’ = H, 2a; R = Cy, R’ = H, 2b; R = Cy, R’ = Me, 2c) in 81–95% yields. The diiron-oxazolidinone conjugate [Fe2Cp2(NH2OX)(CO)(μ-CO){μ-CN(Me)2}]CF3SO3, 3, was prepared from 1a, 3-(2-aminoethyl)-5-phenyloxazolidin-2-one (NH2OX) and Me3NO, and finally isolated in 96% yield. In contrast, the one pot reactions of 1a-b with NHEt2 in the presence of Me3NO gave the unstable [Fe2Cp2(NHEt2)(CO)(μ-CO){μ-CN(Me)(R)}]CF3SO3 (R = Me, 4a; R = Cy, 4b) as unclean products. All diiron complexes were characterized by analytical and spectroscopic techniques; moreover, the behavior of 2a–c and 3 in aqueous media was ascertained.

Carbon Dioxide Conversion on Supported Metal Nanoparticles: A Brief Review

The increasing concentration of anthropogenic CO2 in the air is one of the main causes of global warming. The Paris Agreement at COP 21 aims to reach the global peak of greenhouse gas emissions in the second half of this century, with CO2 conversion towards valuable added compounds being one of the main strategies, especially in the field of heterogeneous catalysis. In the current search for new catalysts, the deposition of metallic nanoparticles (NPs) supported on metal oxides and metal carbide surfaces paves the way to new catalytic solutions. This review provides a comprehensive description and analysis of the relevant literature on the utilization of metal-supported NPs as catalysts for CO2 conversion to useful chemicals and propose that the next catalysts generation can be led by single-metal-atom deposition, since in general, small metal particles enhance the catalytic activity. Among the range of potential indicators of catalytic activity and selectivity, the relevance of NPs’ size, the strong metal–support interactions, and the formation of vacancies on the support are exhaustively discussed from experimental and computational perspective.

Oxygenated Hydrocarbons from Catalytic Hydrogenation of Carbon Dioxide

Once fundamental difficulties such as active sites and selectivity are fully resolved, metal-free catalysts such as 3D graphene or carbon nanotubes (CNT) are very cost-effective substitutes for the expensive noble metals used for catalyzing CO2. A viable method for converting environmental wastes into useful energy storage or industrial wealth, and one which also addresses the environmental and energy problems brought on by emissions of CO2, is CO2 hydrogenation into hydrocarbon compounds. The creation of catalytic compounds and knowledge about the reaction mechanisms have received considerable attention. Numerous variables affect the catalytic process, including metal–support interaction, metal particle sizes, and promoters. CO2 hydrogenation into different hydrocarbon compounds like lower olefins, alcoholic composites, long-chain hydrocarbon composites, and fuels, in addition to other categories, have been explained in previous studies. With respect to catalyst design, photocatalytic activity, and the reaction mechanism, recent advances in obtaining oxygenated hydrocarbons from CO2 processing have been made both through experiments and through density functional theory (DFT) simulations. This review highlights the progress made in the use of three-dimensional (3D) nanomaterials and their compounds and methods for their synthesis in the process of hydrogenation of CO2. Recent advances in catalytic performance and the conversion mechanism for CO2 hydrogenation into hydrocarbons that have been made using both experiments and DFT simulations are also discussed. The development of 3D nanomaterials and metal catalysts supported on 3D nanomaterials is important for CO2 conversion because of their stability and the ability to continuously support the catalytic processes, in addition to the ability to reduce CO2 directly and hydrogenate it into oxygenated hydrocarbons.

Enhancing Catalytic Performance through Subsurface Chemistry: The Case of C2H2 Semihydrogenation over Pd Catalysts

Subsurface chemistry in heterogeneous catalysis plays an important role in tuning catalytic performance. Aiming to unravel the role of subsurface heteroatoms, C₂H₂ semihydrogenation on a series of Pd catalysts doped with subsurface heteroatom H, B, C, N, P, or S was fully investigated by density functional theory (DFT) calculations together with microkinetic modeling. The obtained results showed that catalytic performance toward C₂H₂ semihydrogenation was affected significantly by the type and coverage of subsurface heteroatoms. The Pd-B_0.5 and Pd-C_0.5 catalysts with 1/2 monolayer (ML) heteroatom coverage, as well as Pd-N, Pd-P, and Pd-S catalysts with 1/16 ML heteroatom coverage, were screened to not only obviously improve C₂H₄ selectivity and activity but also effectively suppress green oil. The essential reason for subsurface heteroatoms in tuning catalytic performance is attributed to the distinctive surface Pd electronic and geometric structures caused by subsurface heteroatoms. In the Pd-B_0.5 and Pd-C_0.5 catalysts, the Pd surface electronic and geometric effects play the dominant role, while the geometric effect plays a key role in the Pd-N, Pd-P, and Pd-S catalysts. The findings provide theoretically valuable information for designing high-performance metal catalysts in alkyne semihydrogenation through subsurface chemistry.

Spin-state crossover in photo-catalyzed nitrile dihydroboration via Mn-thiolate cooperation

The role of S-donors in ligand-assisted catalysis using first-row metals has not been broadly investigated. Herein is described a combined experimental and computational mechanistic study of the dihydroboration of nitriles with pinacolborane (HBpin) catalyzed by the Mn(i) complex, Mn(κ3-SMeNS)(CO)3, that features thioether, imine, and thiolate donors. Mechanistic studies revealed that catalysis requires the presence of UV light to enter and remain in the catalytic cycle and evidence is presented for loss of two CO ligands. Stoichiometric reactions showed that HBpin reduces the imine N[double bond, length as m-dash]C of the ligand backbone in the absence of nitrile, forming an inactive off-cycle by-product. DFT calculations showed that the bifunctional thiolate donor, coordinative flexibility of the SMeNS ligand, and access to an open-shell intermediate are all crucuial to accessing low-energy intermediates during catalysis.

Manganese Promoted (Bi)carbonate Hydrogenation and Formate Dehydrogenation: Toward a Circular Carbon and Hydrogen Economy

We report here a feasible hydrogen storage and release process by interconversion of readily available (bi)carbonate and formate salts in the presence of naturally occurring α-amino acids. These transformations are of interest for the concept of a circular carbon economy. The use of inorganic carbonate salts for hydrogen storage and release is also described for the first time. Hydrogenation of these substrates proceeds with high formate yields in the presence of specific manganese pincer catalysts and glutamic acid. Based on this, cyclic hydrogen storage and release processes with carbonate salts succeed with good H₂ yields.

Single-Site Iridium Picolinamide Catalyst Immobilized onto Silica for the Hydrogenation of CO2 and the Dehydrogenation of Formic Acid

The development of an efficient heterogeneous catalyst for storing H₂ into CO₂ and releasing it from the produced formic acid, when needed, is a crucial target for overcoming some intrinsic criticalities of green hydrogen exploitation, such as high flammability, low density, and handling. Herein, we report an efficient heterogeneous catalyst for both reactions prepared by immobilizing a molecular iridium organometallic catalyst onto a high-surface mesoporous silica, through a sol–gel methodology. The presence of tailored single-metal catalytic sites, derived by a suitable choice of ligands with desired steric and electronic characteristics, in combination with optimized support features, makes the immobilized catalyst highly active. Furthermore, the information derived from multinuclear DNP-enhanced NMR spectroscopy, elemental analysis, and Ir L₃-edge XAS indicates the formation of cationic iridium sites. It is quite remarkable to note that the immobilized catalyst shows essentially the same catalytic activity as its molecular analogue in the hydrogenation of CO₂. In the reverse reaction of HCOOH dehydrogenation, it is approximately twice less active but has no induction period.

We report the synthesis of a heterogeneous immobilized catalyst (Ir_PicaSi_SiO₂) and its successful application in aqueous CO₂ hydrogenation and FA dehydrogenation. The information derived from multinuclear DNP-enhanced NMR spectroscopy, elemental analysis, and XAS indicates the presence of cationic iridium sites in Ir_PicaSi_SiO₂. The latter shows essentially the same catalytic activity as its molecular analogue in the hydrogenation of CO₂. In the reverse reaction of HCOOH dehydrogenation, it is approximately twice less active but has no induction period.

Homogeneous Catalytic CO2 Hydrogenation by [Fe]-Hydrogenase Bioinspired Complexes: A Computational Study

Computational modeling at the DLPNO-CCSD(T)/CBS//M06-L/def2-TZVP level of theory was used to propose four different iron catalysts whose structures were inspired on the [Fe]-hydrogenase active site: [Fe(^MeP^NNH^NP)(acmp)] (C(1), ^MeP^NNH^NP = 2,6-bis(dimethylphosphine), acmp = acylmethylpyridine), [Fe(C^NNH^NC)(acmp)] (C(2), C^NNH^NC = 2,6-bis(methylimidazol-2-ylidene)), [Fe(^MeP^NN^NP)(acmp)] (D(1), ^MeP^NN^NP = 2,6-bis((dimethylphosphine)pyridine)), and [Fe(C^NN^NC)(acmp)] (D(2), C^NN^NC = 2,6-bis((methylimidazol-2-ylidene) pyridine)). Through these electronic structure calculations, the catalytic mechanism of the reaction was explored. The intermediates and transition states present along the reaction coordinate were identified and described as to their equilibrium geometries, vibrational frequencies, and energies. Quasi-harmonic corrections were performed considering conditions analogous to those used experimentally. To compare the catalytic activities of the studied catalysts, turnover frequencies (TOFs) were calculated. Based on the explored catalytic cycles and TOF values (D(1) > C(1) > D(2) > C(2)), the most suitable iron catalysts are those with tridentate phosphine pincer-type ligands coordinated to the metal center. These systems are new promising iron catalysts to promote the CO₂ hydrogenation to formic acid without any use of bases or additives.

Challenges and recent advancements in the transformation of CO2 into carboxylic acids: straightforward assembly with homogeneous 3d metals

Transformation of carbon dioxide (CO2) into valuable organic carboxylic acids is essential for maintaining sustainability. In this review, such CO2 thermo-, photo- and electrochemical transformations under 3d-transition metal catalysis are described from 2017 until 2022.

Computational Study of CO2 Reduction Catalyzed by Iron(I) Complex at Different Spin States: Cooperativity of Hydrogen Bonding and Auxiliary Group Effect

To explore alternative approaches to the CO₂ reduction to formate and provide an insight into the spin state effect on the CO₂ reduction, we theoretically designed a kind of low-valence iron(I) model complex, whose doublet, quartet, and sextet states are denoted as ² Fe(I), ⁴ Fe(I), and ⁶ Fe(I), respectively. This complex is featured with an iron(I) center, which bonds to a 1,2-ethanediamine (en) and a 2-hydroxy-biphenyl group. Reaction mechanisms for the CO₂ reduction to formate catalyzed by this iron(I) model complex were explored using density functional theory (DFT) computations. Studies showed that the univalent iron(I) compound can efficiently fix and activate a CO₂ molecule, whereas its oxidized forms with trivalent iron(III) or bivalent iron(II) cannot activate CO₂. For the iron(I) compound, it was found that the lowest spin state ² Fe(I) is the most favorable for the CO₂ reduction as the reactions barriers involving ² Fe(I), ⁴ Fe(I), and ⁶ Fe(I) are 25.6, 37.2, and 35.9 kcal/mol, respectively. Yet, a photosensitizer-free visible-light-mediated high-low spin shift from ⁴ Fe(I) and ⁶ Fe(I) to ² Fe(I) is likely through the reverse intersystem crossing (RIC) because the ⁴ Fe(I) and ⁶ Fe(I) compounds have strong absorption in the visible-light range. Notably, the synergistic interaction between the hydrogen bonding from the auxiliary hydroxyl group in the 2-hydroxy-biphenyl moiety to CO₂ and an intermediate five-membered ring promotes the proton transfer, leading to the formation of the -COOH moiety from CO₂ and the Fe-O bond. With the addition of H₂, one H₂ molecule is split by the Fe-O bond and thus serves as H atom sources for both the CO₂ reduction and the recovery of the auxiliary hydroxyl group. The present theoretical study provides a novel solution for the challenging CO₂ reduction, which calls for further experimental verifications.

Ligand-assisted Hydride Transfer: A Pivotal Step for CO2 Hydroboration Catalyzed by a Mononuclear Mn(I) PNP Complex

A mononuclear Mn(I) pincer complex [Mn(Ph₂ PCH₂ SiMe₂ )₂ NH(CO)₂ Br] was disclosed to catalyze the pinacolborane (HBpin)-based CO₂ hydroboration reaction. Density functional calculations were conducted to reveal the reaction mechanism. The calculations showed that the reaction mechanism could be divided into four stages: (1) the addition of HBpin to the unsaturated catalyst C1; (2) the reduction of CO₂ to HCOOBpin; (3) the reduction of HCOOBpin to HCHO; (4) the reduction of HCHO to CH₃ OBpin. The activation of HBpin is the ligand-assisted addition of HBpin to the unsaturated Mn(I)-N complex C1 generated by the elimination of HBr from the Mn(I) pincer catalyst. The sequential substrate reductions share a common mechanism, and every hydroboration commences with the nucleophilic attack of the Mn(I)-H to the electron-deficient carbon centers. The hydride transfer from Mn(I) to HCOOBpin was found to be the rate-limiting step for the whole catalytic reaction, with a total barrier of 27.0 kcal/mol, which fits well with the experimental observations at 90 °C. The reactivity trend of CO₂ , HCOOBpin, HCHO, and CH₃ OBpin was analyzed through both thermodynamic and kinetic analysis, in the following order, namely HCHO>CO₂ >HCOOBpin≫CH₃ OBpin. Importantly, the very high barrier for the reduction of CH₃ OBpin to form CH₄ reconciles with the fact that methane was not observed in this catalytic reaction.

(Cyclopentadienone)iron Complexes: Synthesis, Mechanism and Applications in Organic Synthesis

(Cyclopentadienone)iron tricarbonyl complexes are catalytically active, inexpensive, easily accessible and air-stable that are extensively studied as an active pre-catalyst in homogeneous catalysis. Its versatile catalytic activity arises exclusively due to the presence of a non-innocent ligand, which can trigger its unique redox properties effectively. These complexes have been employed widely in (transfer)hydrogenation (e. g., reduction of polar multiple bonds, Oppenauer-type oxidation of alcohols), C-C and C-N bond formation (e. g., reductive aminations, α-alkylation of ketones) and other synthetic transformations. In this review, we discuss the remarkable advancement of its various synthetic applications along with synthesis and mechanistic studies, until February 2021.

Asymmetric Induction with a Chiral Amine Catalyzed by a Ru-PNP Pincer Complex: Insight from Theoretical Investigation

In this paper, the mechanism of asymmetric amination of a racemic alcohol with Ellman's sulfinamide and the origin of diastereoselectivity catalyzed by a Ru-PNP pincer complex were studied using density functional theory (DFT). The mechanism involves dehydrogenation of the racemic alcohol, C-N coupling, and hydrogen transfer from the catalyst to the in situ formed imine. The calculated results indicate that both the alcohol dehydrogenation and imine hydrogenation are stepwise. The hydride transfer from a Ru hydride complex to the imine is shown to be the chirality-determining step in the whole catalytic cycle. It was found that the diastereoselectivity mainly stems from the hydrogen bonding interactions between the oxygen atom of the sulfinyl moiety and the hydrogen atom of the NH group of the ligand.

Cyclopentadienone Iron Tricarbonyl Complexes-Catalyzed Hydrogen Transfer in Water

The development of efficient and low-cost catalytic systems is important for the replacement of robust noble metal complexes. The synthesis and application of a stable, phosphine-free, water-soluble cyclopentadienone iron tricarbonyl complex in the reduction of polarized double bonds in pure water is reported. In the presence of cationic bifunctional iron complexes, a variety of alcohols and amines were prepared in good yields under mild reaction conditions.

Understanding the performance of a bisphosphonate Ru water oxidation catalyst

Water oxidation catalysts (WOCs) are a key part of generating H₂ from water and sunlight, consequently, it is a promising process for the production of clean energy.