Solution structure of the toluene 4-monooxygenase effector protein (T4moD)

Purification and Characterization of the Isoprene Monooxygenase from Rhodococcus sp. Strain AD45

Isoprene (2-methyl-1,3-butadiene) is a climate-active gas released to the atmosphere in large quantities, comparable to methane in magnitude. Several bacteria have been isolated which can grow on isoprene as a sole carbon and energy source, but very little information is available about the degradation of isoprene by these bacteria at the biochemical level. Isoprene utilization is dependent on a multistep pathway, with the first step being the oxidation of isoprene to epoxy-isoprene. This is catalyzed by a four-component soluble diiron monooxygenase, isoprene monooxygenase (IsoMO). IsoMO is a six-protein complex comprising an oxygenase (IsoABE), containing the di-iron active site, a Rieske-type ferredoxin (IsoC), a NADH reductase (IsoF), and a coupling/effector protein (IsoD), homologous to the soluble methane monooxygenase and alkene/aromatic monooxygenases. Here, we describe the purification of the IsoMO components from Rhodococcus sp. AD45 and reconstitution of isoprene-oxidation activity in vitro. Some IsoMO components were expressed and purified from the homologous host Rhodococcus sp. AD45-ID, a Rhodococcus sp. AD45 strain lacking the megaplasmid which contains the isoprene metabolic gene cluster. Others were expressed in Escherichia coli and purified as fusion proteins. We describe the characterization of these purified components and demonstrate their activity when combined with Rhodococcus sp. AD45 cell lysate. Demonstration of IsoMO activity in vitro provides a platform for further biochemical and biophysical characterization of this novel soluble diiron center monooxygenase, facilitating new insights into the enzymatic basis for the bacterial degradation of isoprene. IMPORTANCE Isoprene is a highly abundant climate-active gas and a carbon source for some bacteria. Analyses of the genes encoding isoprene monooxygenase (IsoMO) indicate this enzyme is a soluble diiron center monooxygenase in the same family of oxygenases as soluble methane monooxygenase, alkene monooxygenase, and toluene monooxygenase. We report the initial biochemical characterization of IsoMO from Rhodococcus, the first from any bacterium, describing the challenging purification and reconstitution of in vitro activity of its four components. This study lays the foundation for future detailed mechanistic studies of IsoMO, a key enzyme in the global isoprene cycle.

The mycobacterial binuclear iron monooxygenases require a specific chaperonin-like protein for functional expression in a heterologous host

The mimABCD gene clusters in Mycobacterium smegmatis strain mc(2) 155 and Mycobacterium goodii strain 12523 encode binuclear iron monooxygenases that oxidize propane and phenol. In this study, we attempted to express each mimABCD gene cluster in a heterologous host. The actinomycetous strain Rhodococcus opacus B-4, which is phylogenetically close to Mycobacterium, was selected as the host. Each mimABCD gene cluster was cloned into the Rhodococcus-Escherichia coli shuttle vector, pTip-QC2, and then introduced into R. opacus cells. Although whole-cell assays were performed with phenol as a substrate, the transformed R. opacus cells did not oxidize this substrate. SDS/PAGE analysis revealed that the oxygenase large subunit MimA was expressed in the insoluble fraction of R. opacus cells. We found that a gene designated mimG, which lies downstream of mimABCD, exhibits similarity in the amino acid sequence of its product with the products of genes encoding the chaperonin GroEL. When the mimG gene was cloned and coexpressed with each mimABCD gene cluster in R. opacus strain B-4, this host successfully acquired oxidation activity towards phenol. SDS/PAGE and western blotting analyses demonstrated that MimA was clearly soluble when in the presence of MimG. These results indicated that MimG played essential roles in the productive folding of MimA, and that the resulting soluble MimA protein led to the active expression of MimABCD.

Molecular determinants of the regioselectivity of toluene/o-xylene monooxygenase from Pseudomonas sp. strain OX1

Bacterial multicomponent monooxygenases (BMMs) are a heterogeneous family of di-iron monooxygenases which share the very interesting ability to hydroxylate aliphatic and/or aromatic hydrocarbons. Each BMM possesses defined substrate specificity and regioselectivity which match the metabolic requirements of the strain from which it has been isolated. Pseudomonas sp. strain OX1, a strain able to metabolize o-, m-, and p-cresols, produces the BMM toluene/o-xylene monooxygenase (ToMO), which converts toluene to a mixture of o-, m-, and p-cresol isomers. In order to investigate the molecular determinants of ToMO regioselectivity, we prepared and characterized 15 single-mutant and 3 double-mutant forms of the ToMO active site pocket. Using the Monte Carlo approach, we prepared models of ToMO-substrate and ToMO-reaction intermediate complexes which allowed us to provide a molecular explanation for the regioselectivities of wild-type and mutant ToMO enzymes. Furthermore, using binding energy values calculated by energy analyses of the complexes and a simple mathematical model of the hydroxylation reaction, we were able to predict quantitatively the regioselectivities of the majority of the variant proteins with good accuracy. The results show not only that the fine-tuning of ToMO regioselectivity can be achieved through a careful alteration of the shape of the active site but also that the effects of the mutations on regioselectivity can be quantitatively predicted a priori.

Structural consequences of effector protein complex formation in a diiron hydroxylase

Carboxylate-bridged diiron hydroxylases are multicomponent enzyme complexes responsible for the catabolism of a wide range of hydrocarbons and as such have drawn attention for their mechanism of action and potential uses in bioremediation and enzymatic synthesis. These enzyme complexes use a small molecular weight effector protein to modulate the function of the hydroxylase. However, the origin of these functional changes is poorly understood. Here, we report the structures of the biologically relevant effector protein-hydroxylase complex of toluene 4-monooxygenase in 2 redox states. The structures reveal a number of coordinated changes that occur up to 25 A from the active site and poise the diiron center for catalysis. The results provide a structural basis for the changes observed in a number of the measurable properties associated with effector protein binding. This description provides insight into the functional role of effector protein binding in all carboxylate-bridged diiron hydroxylases.

X-ray structure of a hydroxylase-regulatory protein complex from a hydrocarbon-oxidizing multicomponent monooxygenase, Pseudomonas sp. OX1 phenol hydroxylase

Phenol hydroxylase (PH) belongs to a family of bacterial multicomponent monooxygenases (BMMs) with carboxylate-bridged diiron active sites. Included are toluene/o-xylene (ToMO) and soluble methane (sMMO) monooxygenase. PH hydroxylates aromatic compounds, but unlike sMMO, it cannot oxidize alkanes despite having a similar dinuclear iron active site. Important for activity is formation of a complex between the hydroxylase and a regulatory protein component. To address how structural features of BMM hydroxylases and their component complexes may facilitate the catalytic mechanism and choice of substrate, we determined X-ray structures of native and SeMet forms of the PH hydroxylase (PHH) in complex with its regulatory protein (PHM) to 2.3 A resolution. PHM binds in a canyon on one side of the (alphabetagamma)2 PHH dimer, contacting alpha-subunit helices A, E, and F approximately 12 A above the diiron core. The structure of the dinuclear iron center in PHH resembles that of mixed-valent MMOH, suggesting an Fe(II)Fe(III) oxidation state. Helix E, which comprises part of the iron-coordinating four-helix bundle, has more pi-helical character than analogous E helices in MMOH and ToMOH lacking a bound regulatory protein. Consequently, conserved active site Thr and Asn residues translocate to the protein surface, and an approximately 6 A pore opens through the four-helix bundle. Of likely functional significance is a specific hydrogen bond formed between this Asn residue and a conserved Ser side chain on PHM. The PHM protein covers a putative docking site on PHH for the PH reductase, which transfers electrons to the PHH diiron center prior to O2 activation, suggesting that the regulatory component may function to block undesired reduction of oxygenated intermediates during the catalytic cycle. A series of hydrophobic cavities through the PHH alpha-subunit, analogous to those in MMOH, may facilitate movement of the substrate to and/or product from the active site pocket. Comparisons between the ToMOH and PHH structures provide insights into their substrate regiospecificities.

Alteration of the stereo- and regioselectivity of alkene monooxygenase based on coupling protein interactions

Alkene monooxygenase from Xanthobacter autotrophicus Py2 (XAMO) catalyses the asymmetric epoxidation of a broad range of alkenes. As well as the electron transfer components (a NADH-oxidoreductase and a Rieske-type ferredoxin) and the terminal oxygenase containing the binuclear non-haem iron active site, it requires a small catalytic coupling/effector protein, AamD. The effect of changing AamD stoichiometry and substitution with effector protein homologues on the regioselectivity of toluene hydroxylation and stereoselectivity of styrene epoxidation has been studied. At sub-optimal stoichiometries, there was a marked change in regioselectivity, but no significant change in epoxidation stereoselectivity. Recombinant coupling proteins from a number of phylogenetically related oxygenases were investigated for their ability to functionally replace AamD. Substitution of AamD with IsoD, the coupling protein from the closely related isoprene monooxygenase, changed the regioselectivity of toluene hydroxylation and stereoselectivity of styrene epoxidation, although this was accompanied by a high level of uncoupling. This indicates the importance of coupling protein interaction in controlling the catalytic specificity. Sequence analysis suggests that interaction between Asn34 and Arg57 is important for complementation specificity of the coupling proteins, providing a candidate for site-directed mutagenesis studies.

Solution structure of T4moC, the Rieske ferredoxin component of the toluene 4-monooxygenase complex

Toluene 4-monooxygenase, a four-protein complex from Pseudomonas mendocina KR1, catalyzes the NADH- and O(2)-dependent hydroxylation of toluene to form p-cresol. The solution structure of the 112-amino-acid Rieske ferredoxin component, T4moC, was determined from 2D and 3D (1)H, (13)C, and (15)N NMR data. The structural model was refined through simulated annealing by molecular dynamics in torsion angle space with input from 1650 experimental restraints, including 1264 inter-proton distance restraints obtained from NOEs, 247 non-redundant intra-residue NOEs, 26 hydrogen bond restraints, and 113 dihedral angle ( phi, psi) restraints. The 20 calculated conformers that best satisfied the input restraints were submitted to refinement in explicit solvent to improve the stereochemical quality. With exclusion of ill-defined N- and C-terminal segments (Ser2; His111-Ser112) and residues near to the [2Fe-2S] cluster, the atomic root mean square deviation for the 20 conformers with respect to the mean coordinates was 1.09 A for the backbone and 1.60 A for all non-hydrogen atoms. The T4moC structure consists of 10 beta-strands arranged in the three anti-parallel beta-sheet topology observed in all Rieske [2Fe-2S] domain proteins. The S(gamma) of Cys45 and Cys64 and the N(delta1) of His47 and His67 provide the ligands to the [2Fe-2S] cluster of T4moC. (1)H-(15)N HSQC measurements show that both His47-N(epsilon2) and His67-N(epsilon2) are protonated at the pH of the NMR experiments. Comparisons are made between the present NMR structure, previous paramagnetic NMR studies of T4moC, and the X-ray structures of other members of the Rieske protein family.

Phenol hydroxylase and toluene/o-xylene monooxygenase from Pseudomonas stutzeri OX1: interplay between two enzymes

Degradation of aromatic hydrocarbons by aerobic bacteria is generally divided into an upper pathway, which produces dihydroxylated aromatic intermediates by the action of monooxygenases, and a lower pathway, which processes these intermediates down to molecules that enter the citric acid cycle. Bacterial multicomponent monooxygenases (BMMs) are a family of enzymes divided into six distinct groups. Most bacterial genomes code for only one BMM, but a few cases (3 out of 31) of genomes coding for more than a single monooxygenase have been found. One such case is the genome of Pseudomonas stutzeri OX1, in which two different monooxygenases have been found, phenol hydroxylase (PH) and toluene/o-xylene monooxygenase (ToMO). We have already demonstrated that ToMO is an oligomeric protein whose subunits transfer electrons from NADH to oxygen, which is eventually incorporated into the aromatic substrate. However, no molecular data are available on the structure and on the mechanism of action of PH. To understand the metabolic significance of the association of two similar enzymatic activities in the same microorganism, we expressed and characterized this novel phenol hydroxylase. Our data indicate that the PH P component of PH transfers electrons from NADH to a subcomplex endowed with hydroxylase activity. Moreover, a regulatory function can be suggested for subunit PH M. Data on the specificity and the kinetic constants of ToMO and PH strongly support the hypothesis that coupling between the two enzymatic systems optimizes the use of nonhydroxylated aromatic molecules by the draining effect of PH on the product(s) of oxidation catalyzed by ToMO, thus avoiding phenol accumulation.

Toluene 3-monooxygenase of Ralstonia pickettii PKO1 is a para-hydroxylating enzyme

Oxygenases are promising biocatalysts for performing selective hydroxylations not accessible by chemical methods. Whereas toluene 4-monooxygenase (T4MO) of Pseudomonas mendocina KR1 hydroxylates monosubstituted benzenes at the para position and toluene ortho-monooxygenase (TOM) of Burkholderia cepacia G4 hydroxylates at the ortho position, toluene 3-monooxygenase (T3MO) of Ralstonia pickettii PKO1 was reported previously to hydroxylate toluene at the meta position, producing primarily m-cresol (R. H. Olsen, J. J. Kukor, and B. Kaphammer, J. Bacteriol. 176:3749-3756, 1994). Using gas chromatography, we have discovered that T3MO hydroxylates monosubstituted benzenes predominantly at the para position. TG1/pBS(Kan)T3MO cells expressing T3MO oxidized toluene at a maximal rate of 11.5 +/- 0.33 nmol/min/mg of protein with an apparent Km value of 250 microM and produced 90% p-cresol and 10% m-cresol. This product mixture was successively transformed to 4-methylcatechol. T4MO, in comparison, produces 97% p-cresol and 3% m-cresol. Pseudomonas aeruginosa PAO1 harboring pRO1966 (the original T3MO-bearing plasmid) also exhibited the same product distribution as that of TG1/pBS(Kan)T3MO. TG1/pBS(Kan)T3MO produced 66% p-nitrophenol and 34% m-nitrophenol from nitrobenzene and 100% p-methoxyphenol from methoxybenzene, as well as 62% 1-naphthol and 38% 2-naphthol from naphthalene; similar results were found with TG1/pBS(Kan)T4MO. Sequencing of the tbu locus from pBS(Kan)T3MO and pRO1966 revealed complete identity between the two, thus eliminating any possible cloning errors. 1H nuclear magnetic resonance analysis confirmed the structural identity of p-cresol in samples containing the product of hydroxylation of toluene by pBS(Kan)T3MO.

Evolution of the soluble diiron monooxygenases

Based on structural, biochemical, and genetic data, the soluble diiron monooxygenases can be divided into four groups: the soluble methane monooxygenases, the Amo alkene monooxygenase of Rhodococcus corallinus B-276, the phenol hydroxylases, and the four-component alkene/aromatic monooxygenases. The limited phylogenetic distribution of these enzymes among bacteria, together with available genetic evidence, indicates that they have been spread largely through horizontal gene transfer. Phylogenetic analyses reveal that the alpha- and beta-oxygenase subunits are paralogous proteins and were derived from an ancient gene duplication of a carboxylate-bridged diiron protein, with subsequent divergence yielding a catalytic alpha-oxygenase subunit and a structural beta-oxygenase subunit. The oxidoreductase and ferredoxin components of these enzymes are likely to have been acquired by horizontal transfer from ancestors common to unrelated diiron and Rieske center oxygenases and other enzymes. The cumulative results of phylogenetic reconstructions suggest that the alkene/aromatic monooxygenases diverged first from the last common ancestor for these enzymes, followed by the phenol hydroxylases, Amo alkene monooxygenase, and methane monooxygenases.

Molecular analysis of the soluble butane monooxygenase from 'Pseudomonas butanovora'

'Pseudomonas butanovora' is capable of growth with butane via the oxidation of butane to 1-butanol, which is catalysed by a soluble butane monooxygenase (sBMO). In vitro oxidation of ethylene (an alternative substrate for sBMO) was reconstituted in the soluble portion of cell extracts and was NADH-dependent. Butane monooxygenase was separated into three components which were obligately required for substrate oxidation. The N-terminal sequences of the peptides associated with butane monooxygenase led to the cloning and sequencing of the 5797 nucleotide bmo gene cluster. Comparisons of the deduced amino acid sequences with other multicomponent monooxygenases suggest that sBMO is a multimeric hydroxylase with 61, 45 and 19 kDa subunits encoded by bmoXYZ, a 40 kDa oxidoreductase encoded by bmoC, and a 15 kDa regulatory protein encoded by bmoB. A sixth structural gene (bmoD) encodes a 9.6 kDa protein with similarity exclusively to mmoD (orfY), a putative metal centre assembly protein of the soluble methane monooxygenases. Insertional inactivation of bmoX resulted in a mutant 'P. butanovora' strain incapable of growth with butane. A putative promoter element characteristic of promoters associated with sigma(54)-dependent transcription initiation was located upstream of the bmo genes. Expression of all six genes was detected in butane-induced cells. Butane monooxygenase from 'P. butanovora' aligns most closely with non-haem carboxylate-bridged diiron monooxygenases and, moreover, contains the characteristic iron-binding motif. The structural and mechanistic implications of the high sequence identity (up to 64%) between the peptides of butane monooxygenase and methane monooxygenases are discussed.