β-Diketiminato Calcium and Magnesium Amides; Model Complexes for Hydroamination Catalysis

Calcium-Ligand Cooperation Promoted Activation of N2O, Amine, and H2 as well as Catalytic Hydrogenation of Imines, Quinoline, and Alkenes

Bond activation and catalysis using s-block metals are of great significance. Herein, a series of calcium pincer complexes with deprotonated side arms have been prepared using pyridine-based PNP and PNN ligands. The complexes were characterized by NMR and X-ray crystal diffraction. Utilizing the obtained calcium complexes, unprecedented N2O activation by metal-ligand cooperation (MLC) involving dearomatization-aromatization of the pyridine ligand was achieved, generating aromatized calcium diazotate complexes as products. Additionally, the dearomatized calcium complexes were able to activate the N-H bond as well as reversibly activate H2, offering an opportunity for the catalytic hydrogenation of various unsaturated molecules. DFT calculations were applied to analyze the electronic structures of the synthesized complexes and explore possible reaction mechanisms. This study is an important complement to the area of MLC and main-group metal chemistry.

Stereoselective polymerization of rac-lactide catalyzed by zwitterionic calcium complexes

Two zwitterionic calcium complexes L¹CaN(SiMe₃)₂(THF) (1) and L²CaN(SiMe₃)₂ (2) via protolysis reaction were synthesized. At −75 °C, 1 gave a heterotactic sequence enriched polylactide, whilst 2 produced an isotactic sequence enriched polymer.

Synthesis of Functionalized Isoindolinones via Calcium Catalyzed Generation and Trapping of N-Acyliminium Ions

Herein we report our full investigation into the calcium catalyzed generation and trapping of N-acyliminium ions from readily available 3-hydroxyisoindolinones. We have successfully employed a range of traditional nucleophiles including carbon, nitrogen, and sulfur containing reactive partners. The reaction is tolerant to a wide range of functionalities and provides high value scaffolds in good to excellent yields.

Heavier Alkaline-Earth Catalyzed Dehydrocoupling of Silanes and Alcohols for the Synthesis of Metallo-Polysilylethers

The dehydrocoupling of silanes and alcohols mediated by heavier alkaline-earth catalysts, [Ae{N(SiMe₃ )₂ }₂ ⋅(THF)₂ ] (I-III) and [Ae{CH(SiMe₃ )₂ }₂ ⋅(THF)₂ ], (IV-VI) (Ae=Ca, Sr, Ba) is described. Primary, secondary, and tertiary alcohols were coupled to phenylsilane or diphenylsilane, whereas tertiary silanes are less tolerant towards bulky substrates. Some control over reaction selectivity towards mono-, di-, or tri-substituted silylether products was achieved through alteration of reaction stoichiometry, conditions, and catalyst. The ferrocenyl silylether, FeCp(C₅ H₄ SiPh(OBn)₂ ) (2), was prepared and fully characterized from the ferrocenylsilane, FeCp(C₅ H₄ SiPhH₂ ) (1), and benzyl alcohol using barium catalysis. Stoichiometric experiments suggested a reaction manifold involving the formation of Ae-alkoxide and hydride species, and a series of dimeric Ae-alkoxides [(Ph₃ CO)Ae(μ₂ -OCPh₃ )Ae(THF)] (3 a-c, Ae=Ca, Sr, Ba) were isolated and fully characterized. Mechanistic experiments suggested a complex reaction mechanism involving dimeric or polynuclear active species, whose kinetics are highly dependent on variables such as the identity and concentration of the precatalyst, silane, and alcohol. Turnover frequencies increase on descending Group 2 of the periodic table, with the barium precatalyst III displaying an apparent first-order dependence in both silane and alcohol, and an optimum catalyst loading of 3 mol % Ba, above which activity decreases. With precatalyst III in THF, ferrocene-containing poly- and oligosilylethers with ferrocene pendent to- (P1-P4) or as a constituent (P5, P6) of the main polymer chain were prepared from 1 or Fe(C₅ H₄ SiPhH₂ )₂ (4) with diols 1,4-(HOCH₂ )₂ -(C₆ H₄ ) and 1,4-(CH(CH₃ )OH)₂ -(C₆ H₄ ), respectively. The resultant materials were characterized by NMR spectroscopy, gel permeation chromatography (GPC) and DOSY NMR spectroscopy, with estimated molecular weights in excess of 20,000 Da for P1 and P4. The iron centers display reversible redox behavior and thermal analysis showed P1 and P5 to be promising precursors to magnetic ceramic materials.

Stepwise Reduction at Magnesium and Beryllium: Cooperative Effects of Carbenes with Redox Non-Innocent α-Diimines

In the past two decades, the organometallic chemistry of the alkaline earth elements has experienced a renaissance due in part to developments in ligand stabilization strategies. In order to expand the scope of redox chemistry known for magnesium and beryllium, we have synthesized a set of reduced magnesium and beryllium complexes and compared their resulting structural and electronic properties. The carbene-coordinated alkaline earth-halides, (^Et2CAAC)MgBr₂ (1), (SIPr)MgBr₂ (2), (^Et2CAAC)BeCl₂ (3), and (SIPr)BeCl₂ (4) [^Et2CAAC = diethyl cyclic(alkyl)(amino) carbene; SIPr = 1,3-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazole-2-ylidene] were combined with an α-diimine [2,2-bipyridine (bpy) or bis(2,6-diisopropylphenyl)-1,4-diazabutadiene (^DippDAB)] and the appropriate stoichiometric amount of potassium graphite to form singly- and doubly-reduced compounds (^Et2CAAC)MgBr(^DippDAB) (5), (^Et2CAAC)MgBr(bpy) (6), (^Et2CAAC)Mg(^DippDAB) (7), (^Et2CAAC)Be(bpy) (8), and (SIPr)Be(bpy) (9). The doubly-reduced compounds 7-9 exhibit substantial π-bonding interactions across the diimine core, metal center, and π-acidic carbene. Each complex was fully characterized by UV-vis, FT-IR, X-ray crystallography, ¹H, ¹³C, and ⁹Be NMR, or EPR where applicable. We use these compounds to highlight the differences in the organometallic chemistry of the lightest alkaline earth metals, magnesium and beryllium, in an otherwise identical chemical environment.

Amidomagnesium cations

We report the synthesis, structure and reactivity of molecular amidomagnesium cations bearing tris{2-(dimethylamino)-ethyl}amine (Me₆TREN). Me₆TREN binds to the cationic magnesium centre exhibiting κ⁴ and κ³ coordination modes in [Me₆TREN-Mg-N(SiHMe₂)₂]⁺ and [Me₆TREN-Mg-N(SiMe₃)₂]⁺ respectively. [Me₆TREN-Mg-N(SiHMe₂)₂]⁺ reacts with benzophenone resulting in the insertion of the carbonyl group across β-SiH bond. The reaction between [Me₆TREN-Mg-N(SiMe₃)₂]⁺ and CO₂ leads to [Me₆TREN-Mg-OSiMe₃]⁺, while the reaction with H₂O results in [Me₆TREN-Mg-OH]₂²⁺. Attempts to prepare hydridomagnesium cations from [Me₆TREN-Mg-N(SiMe₃)₂]⁺ using KH resulted in the precipitation of MgH₂ and the isolation of [(Me₆TREN)K(THF)₃]⁺.

Stoichiometric reactions and catalytic dehydrogenations of amine–boranes with calcium aryloxide

A calcium aryloxide complex reacts with amine–boranes to give unprecedented amine–borane coordinated complexes through Ca⋯H interactions, which serve as active species for catalytic dehydrogenation reactions.

Magnesium-mediated arylation of amines via C–F bond activation of fluoroarenes

Exploiting the high nucleophilic power of structurally defined β-diketiminate stabilised magnesium amides, a new method for amine arylation via rapid C–F bond activation of fluoroarenes is introduced.

Alkaline earth metal complexes stabilized by amidine and guanidine ligands: synthesis, structure and their catalytic activity towards polymerization of rac-lactide

A series of amidine ligands RAmDIPP (R is backbone substituent, R = 2-methylpyridine (HL1), N,N,2-trimethylaniline (HL2), N,N-dimethylpropan-1-amine (HL3); DIPP (2,6-diisopropylphenyl) is N substituent) and a (Z)-1,1-diethyl-2,3-bis(2-methoxyphenyl)guanidine ligand (HL4) have been synthesized. Reaction of HL1-HL4 with Ca[N(SiHMe2)2](THF) or Ca[N(SiMe3)2](THF)2, respectively, afforded complexes 1-8 (1: [L1AmDIPPCa(SiHMe2)2]2, 2: L1AmDIPPCaN(SiMe3)2·(THF)2, 3: L2AmDIPPCaN(SiHMe2)2·(THF)2, 4: L2AmDIPPCaN(SiMe3)2·(THF), 5: L3AmDIPPCaN(SiHMe2)2·(THF)2, 6: L3AmDIPPCaN(SiMe3)2·(THF)2, 7: [L4CaN(SiHMe2)2]2, 8: [L4CaN(SiMe3)2]2). All the complexes were well-defined by NMR spectrum analyses and the molecular structures of 3 and 5-8 were further determined by single crystal X-ray diffraction analyses. In combination with an excess of PhOH as the chain transfer agent, complexes 1-8 catalyzed immortal ring-opening polymerization of rac-lactide in a controlled manner and exhibited moderate catalytic activity at room temperature. The end-group fidelity of the resultant polymer was certified by NMR and MALDI-TOF mass spectra.

Calcium-catalyzed reactions of element-H bonds

Investigation on organocalcium catalysis is just unfolding during the past decade. Beside conventional Ca salts with strong electron-withdrawing counter anions that may serve as Lewis acid catalysts, many Ca complexes have also been designed recently and found to be good catalysts in activation of element-H (EH) bonds like transition metal catalysts. These findings are interesting and may attract the interest of the chemists. Due to the great abundance, non-toxicity, and biocompatible features of Ca element, Ca-catalyzed reactions can be of great significance from the viewpoint of industry. This short review summarizes the recent advances on Ca-catalyzed reactions of EH bonds. We hope that it may provide a useful guide for interested readers from both the academy and industry.

Aerosols: A Sustainable Route to Functional Materials

Sustainability is an increasingly important topic in the design and manufacture of materials, with the need to reduce the environmental impact of producing materials being of paramount significance. A competing interest to this is the ability to produce functional materials in large volumes from a fast, on-line process, which can be integrated easily into existing industrial setups. Herein, we present aerosol-assisted chemical vapour deposition (AACVD) routes to advanced functional materials. We will show that by careful design of precursors and manipulation of deposition conditions, it is possible to achieve high sustainability whilst maintaining fast growth rates and large scale production of thin film functional materials.

Bora-amidinate as a cooperative ligand in group 2 metal catalysis

Syntheses and crystal structures of the monomeric bora-amidinate (bam) complexes ^DIPPNBN-Mg·(THF)₃ and ^DIPPNBN-Ca·(THF)₄ are presented; ^DIPPNBN = HB[N(2,6-iPr₂-C₆H₃)]₂. The simplicity of their ¹H NMR spectra in THF-d₈ suggest that their monomeric solid state structures are retained in solution. ^DIPPNBN-Mg·(THF)₃ in C₆D₆, however, is in equilibrium with a dimeric species. Calculations (B3PW91/6-311++G**) reveal a very high localized negative charge (NPA: -1.103) on the N atoms in ^DIPPNBN-Mg. The strongly basic properties of the bam ligand are in agreement with catalytic activity of these complexes in the intramolecular alkene hydroamination. A mechanism is proposed in which the bam ligand is non-innocent and cooperative, playing an active role in substrate deprotonation and product protonation.

Organomagnesium amide catalyzed cross-dehydrocoupling of organosilanes with amines

Heteroleptic organomagnesium complex pre-catalyzed cross-dehydrocoupling of silanes with amines.

Calcium, Strontium and Barium Homogeneous Catalysts for Fine Chemicals Synthesis

The large alkaline earths (Ae), calcium, strontium and barium, have in the past 15 years yielded a brand new generation of heteroleptic molecular catalysts for the production of fine chemicals. However, the integrity of these complexes is often plagued by ligand redistribution equilibria in solution. This personal account retraces the paths followed in our research group towards the design of stable heteroleptic alkalino-earth complexes, including the use of intramolecular noncovalent Ae···H-Si and Ae···F-C interactions. Their implementation as homogenous precatalysts for reactions such as the intramolecular and intermolecular hydroamination and hydrophosphination of activated alkenes, the hydrophosphonylation of ketones, and the dehydrogenative coupling of amines and hydrosilanes that enable the efficient and controlled formations of CP, CN, or SiN σ-bonds, is presented in a synthetic perspective that highlights their overall outstanding catalytic performance.

Synthesis of Sodium Complexes Supported with NNO-Tridentate Schiff Base Ligands and Their Applications in the Ring-Opening Polymerization of L-Lactide

A series of sodium complexes bearing NNO-tridentate Schiff base ligands with an N-pendant arm were synthesized and used as catalysts for the ring-opening polymerization of L-lactide (L-LA). Electronic effects of ancillary ligands coordinated by sodium complexes substantially influence the catalysis, and ligands with electron-donating groups increase the catalytic activity of the sodium complexes for catalyzing L-LA polymerization. In particular, a sodium complex bearing a 4-methoxy group has the highest activity with conversion up to 95% within 30 s at 0 °C and a low polydispersity index of 1.13, whereas the 4-bromo group showed the poorest performance with regard to the catalytic rate of L-LA polymerization in the presence of benzyl alcohol (BnOH). (1)H NMR pulsed-gradient spin-echo diffusion experiments and single-crystal X-ray analyses showed that sodium complexes [L(H)Na(THF)]2 and [L(4-Cl)Na(THF)]2 were dinuclear species in both solution and the solid state. The kinetic results indicated a first-order dependence on each of [[L(4-Cl)Na]2], [l-LA], and [BnOH].

Alkaline earths as main group reagents in molecular catalysis

The past decade has witnessed some remarkable advances in our appreciation of the structural and reaction chemistry of the heavier alkaline earth (Ae = Mg, Ca, Sr, Ba) elements. Derived from complexes of these metals in their immutable +2 oxidation state, a broad and widely applicable catalytic chemistry has also emerged, driven by considerations of cost and inherent low toxicity. The considerable adjustments incurred to ionic radius and resultant cation charge density also provide reactivity with significant mechanistic and kinetic variability as group 2 is descended. In an attempt to place these advances in the broader context of contemporary main group element chemistry, this review focusses on the developing state of the art in both multiple bond heterofunctionalisation and cross coupling catalysis. We review specific advances in alkene and alkyne hydroamination and hydrophosphination catalysis and related extensions of this reactivity that allow the synthesis of a wide variety of acyclic and heterocyclic small molecules. The use of heavier alkaline earth hydride derivatives as pre-catalysts and intermediates in multiple bond hydrogenation, hydrosilylation and hydroboration is also described along with the emergence of these and related reagents in a variety of dehydrocoupling processes that allow that facile catalytic construction of Si-C, Si-N and B-N bonds.

Magnesium-catalysed nitrile hydroboration

A β-diketiminato n-butylmagnesium complex is presented as a selective precatalyst for the reductive hydroboration of organic nitriles with pinacolborane (HBpin). Stoichiometric reactivity studies indicate that catalytic turnover ensues through the generation of magnesium aldimido, aldimidoborate and borylamido intermediates, which are formed in a sequence of intramolecular nitrile insertion and inter- and intramolecular B-H metathesis events. Kinetic studies highlight variations in mechanism for the catalytic dihydroboration of alkyl nitriles, aryl nitriles bearing electron withdrawing (Ar(EWG)CN) and aryl nitriles bearing electron donating (Ar(EDG)CN) substitution patterns. Kinetic isotope effects (KIEs) for catalysis performed with DBpin indicate that B-H bond breaking and C-H bond forming reactions are involved in the rate determining processes during the dihydroboration of alkyl nitriles and Ar(EDG)CN substrates, which display divergent first and second order rate dependences on [HBpin] respectively. In contrast, the hydroboration of Ar(EWG)CN substrates provides no KIE and HBpin is not implicated in the rate determining process during catalysis. Irrespective of these differences, a common mechanism is proposed in which the rate determining steps are deduced to vary through the establishment of several pre-equilibria, the relative positions of which are determined by the respective stabilities of the dimeric and monomeric magnesium aldimide and magnesium aldimidoborate intermediates as a result of adjustments to the basicity of the nitrile substrate. More generally, these observations indicate that homogeneous processes performed under heavier alkaline earth catalysis are likely to demonstrate previously unappreciated mechanistic diversity.

Cyclopentadienyl-based Mg complexes in the intramolecular hydroamination of aminoalkenes: mechanistic evidence for cationic versus neutral magnesium derivatives

Mechanistic evidence in the catalytic hydroamination of aminoalkenes for a cationic magnesium derivative.

Calcium complexes with imino-phosphinanilido chalcogenide ligands for heterofunctionalisation catalysis

Syntheses, characterisation and utilisation of the calcium complexes supported by imino-phosphinanilido chalcogenide ligands {Ph₂P(E)–N–C₆H₄–CHN(Dipp)} (E = S, Se) as molecular precatalysts for the heterofunctionalisation of styrene are reported.

Heteroleptic alkyl and amide iminoanilide alkaline earth and divalent rare earth complexes for the catalysis of hydrophosphination and (cyclo)hydroamination reactions

[{N^N}M(X)(thf)n] alkyl (X=CH(SiMe3)2) and amide (X=N(SiMe3)2) complexes of alkaline earths (M=Ca, Sr, Ba) and divalent rare earths (Yb(II) and Eu(II) ) bearing an iminoanilide ligand ({N^N}(-)) are presented. Remarkably, these complexes proved to be kinetically stable in solution. X-ray diffraction studies allowed us to establish size-structure trends. Except for one case of oxidation with [{N^N}Yb(II){N(SiMe3)2}(thf)], all these complexes are stable under the catalytic conditions and constitute effective precatalysts for the cyclohydroamination of terminal aminoalkenes and the intermolecular hydroamination and intermolecular hydrophosphination of activated alkenes. Metals with equal sizes across alkaline earth and rare earth families display almost identical apparent catalytic activity and selectivity. Hydrocarbyl complexes are much better catalyst precursors than their amido analogues. In the case of cyclohydroamination, the apparent activity decreases with metal size: Ca>Sr>Ba, and the kinetic rate law agrees with R(CHA) =k[precatalyst](1)[aminoalkene](1). The intermolecular hydroamination and hydrophosphination of styrene are anti-Markovnikov regiospecific. In both cases, the apparent activity increases with the ionic radius (Ca<Sr<Ba) but the rate laws are different, and obey R(HA) =k[styrene](1)[amine](1)[precatalyst](1) and R(HP) =k[styrene](1)[HPPh2 ](0)[precatalyst](1), respectively. Mechanisms compatible with the rate laws and kinetic isotopic effects are proposed. [{N^N}Ba{N(SiMe3)2}(thf)2] (3) and [{N^N}Ba{CH(SiMe3)2}(thf)2] (10) are the first efficient Ba-based precatalysts for intermolecular hydroamination and hydrophosphination, and display activity values that are above those reported so far. The potential of the precatalysts for C-N and C-P bond formation is detailed and a rare cyclohydroamination-intermolecular hydroamination "domino" sequence is presented.