Fabrication of surface energy/chemical gradients using self-assembled monolayer surfaces

Evaluation of Factors To Determine Platelet Compatibility by Using Self-Assembled Monolayers with a Chemical Gradient

Intercorrelation among surface chemical composition, packing structure of molecules, water contact angles, amounts and structures of adsorbed proteins, and blood compatibility was systematically investigated with self-assembled monolayers (SAMs) with continuous chemical composition gradients. The SAMs were mixtures of two thiols: n-hexanethiol (hydrophobic and protein-adsorbing) and hydroxyl-tri(ethylene glycol)-terminated alkanethiol (hydrophilic and protein-resistant) with continuously changing mixing ratios. From the systematic analyses, we found that protein adsorption is governed both by sizes of proteins and hydrophobic domains of the substrate. Furthermore, we found a clear correlation between adsorption of fibrinogen and adhesion of platelets. Combined with the results of surface force measurements, we found that the interfacial behavior of water molecules is profoundly correlated with protein resistance and antiplatelet adhesion. On the basis of these results, we conclude that the structuring of water at the SAM-water interface is a critical factor in this context.

Contact angles of surfactant solutions on heterogeneous surfaces

Exploration of new model for contact angle of surfactant solutions on smooth/rough heterogeneous surfaces, allowing adsorption at all interfaces.

A humidity-sensitive hydrogel-Bacillus spore composite for micropatterning of biomolecular gradients

A composite material consisting of Bacillus subtilis spores suspended in a humidity sensitive hydrogel can be used to pattern biomolecules in different concentrations directly onto glass surfaces using a mechanical micromanipulator. By altering the relative humidity surrounding the composite gel during deposition, surface concentration of patterned biomolecules can be controlled and varied to create user-defined, biomolecular surface concentrations.

Programmable chemical gradient patterns by soft grayscale lithography

A method for fabricating chemical gradients on planar and nonplanar substrates using grayscale lithography is reported. Compliant grayscale amplitude masks are fabricated using a vacuum-assisted microfluidic filling protocol that employs dilutions of a carbon-black-containing polydimethylsiloxane emulsion (bPDMS) within traditional clear PDMS (cPDMS) to create planar, fully self-supporting mask elements. The mask is then placed over a surface functionalized with a hydrophobic coumarin-based photocleavable monolayer, which exposes a polar group upon irradiation. The mask serves to modulate the intensity of incident UV light, thereby controlling the density of molecules cleaved. The resulting molecular-level grayscale patterns are characterized by condensation microscopy and imaging mode time-of-flight secondary-ion mass spectrometry (ToF-SIMS). Due to the inherent flexibility of this technique, the photofuse as well as the gradient patterns can be designed for a wide range of applications; in this paper two proof-of-concept demonstrations are shown. The first utilizes the ability to control the resulting contact angle of the surface for the fabrication of a passive pressure-sensitive microfluidic gating system. The second is a model surface modification process that utilizes the functional groups deprotected during the photocleavage to pattern the deposition of moieties with complementary chemistry. The spatial layout, resolution, and concentration of these covalently linked molecules follow the gradient pattern created by the grayscale mask during exposure. The programmable chemical gradient fabrication scheme presented in this work allows explicit engineering of both surface properties that dictate nonspecific interactions (surface energy, charge, etc.) and functional chemistry necessary for covalent bonding.

Fabrication of Multifaceted Micropatterned Surfaces with Laser Scanning Lithography

The implementation of engineered surfaces presenting micrometer-sized patterns of cell adhesive ligands against a biologically inert background has led to numerous discoveries in fundamental cell biology. While existing surface patterning strategies allow for pattering of a single ligand it is still challenging to fabricate surfaces displaying multiple patterned ligands. To address this issue we implemented Laser Scanning Lithography (LSL), a laser-based thermal desorption technique, to fabricate multifaceted, micropatterned surfaces that display independent arrays of subcellular-sized patterns of multiple adhesive ligands with each ligand confined to its own array. We demonstrate that LSL is a highly versatile "maskless" surface patterning strategy that provides the ability to create patterns with features ranging from 450 nm to 100 μm, topography ranging from -1 to 17 nm, and to fabricate both stepwise and smooth ligand surface density gradients. As validation for their use in cell studies, surfaces presenting orthogonally interwoven arrays of 1×8 μm elliptical patterns of Gly-Arg-Gly-Asp-terminated alkanethiol self-assembled monolayers and human plasma fibronectin are produced. Human umbilical vein endothelial cells cultured on these multifaceted surfaces form adhesion sites to both ligands simultaneously and utilize both ligands for lamella formation during migration. The ability to create multifaceted, patterned surfaces with tight control over pattern size, spacing, and topography provides a platform to simultaneously investigate the complex interactions of extracellular matrix geometry, biochemistry, and topography on cell adhesion and downstream cell behavior.

Producing a superhydrophobic paper and altering its repellency through ink-jet printing

A new method for making superhydrophobic (SH) paper based on spraying a nanocomposite film is developed. Furthermore, manipulating the wetting characteristics of SH paper has been demonstrated through a new method, i.e. printing solid grey patterns of different intensities with simple printing technology (home or office grade ink-jet and laser printers). It has been found that for a range of ink intensities (0-85%), water drop mobility can be changed at a different rate (almost independently) from repellency. The repellency of water decreases minimally up to 85% ink intensity with a sharp decrease up to 100% ink intensity. Drop mobility remains constant up to 30% ink intensity with a steady decrease up to 100% ink intensity. It was observed that using ink-jet or laser printing would yield different results for the change of mobility or repellency with higher amounts of ink/toner used. Being able to achieve almost independent control of water drop mobility over water drop repellency on SH paper would allow inexpensive lab-on-paper devices to be used for sampling, mixing and transport of liquids.

Nanopore gradients on porous aluminum oxide generated by nonuniform anodization of aluminum

A method for surface engineering of structural gradients with nanopore topography using the self-ordering process based on electrochemical anodization of aluminum is described. A distinct anodization condition with an asymmetrically distributed electric field at the electrolyte/aluminum interface is created by nonparallel arrangement between electrodes (tilted by 45°) in an electrochemical cell. The anodic aluminum oxide (AAO) porous surfaces with ordered nanopore structures with gradual and continuous change of pore diameters from 80 to 300 nm across an area of 0.5-1 cm were fabricated by this anodization using two common electrolytes, oxalic acid (0.3 M) and phosphoric acid (0.3 M). The formation of pore gradients of AAO is explained by asymmetric and gradual distribution of the current density and temperature variation generated on the surface of Al during the anodization process. Optical and wetting gradients of prepared pore structures were confirmed by reflective interferometric spectroscopy and contact angle measurements showing the ability of this method to generate porous surfaces with multifunctional gradients (structural, optical, wetting). The study of influence of pore structures on cell growth using the culture of neuroblastoma cells reveals biological relevance of nanopore gradients and the potential to be applied as the platform for spatially controllable cell growth and cell differentiation.

Electrochemical preparation of pore wall modification gradients across thin porous silicon layers

Thin film porous silicon layers have been constructed in which the level of chemical modification to the pore walls is altered in a controlled gradient across the material. The gradient modification within such a nanoporous material represents a significant advance over gradients imposed across a flat surface. Gradients of methyl, pentyl acetate, and decyl groups are formed via electrochemical attachment of organohalides with an asymmetric electrode arrangement. The stability and hydrophobicity of the latter two systems have been improved through postprocess "end-capping" of the porous silicon with methyl groups. Two-dimensional mapping transmission FTIR microspectrophotometry and ATR-FTIR have been employed to characterize these new materials. Cleaving the surface-attached pentyl acetate groups to 5-hydroxypentyl groups leads to materials that can act as efficient visual indicators of the ethanol concentration in water over the range 1-10 vol %.

Directed nanoparticle motion on an interfacial free energy gradient

Using total internal reflection fluorescence microscopy (TIRFM), we have observed the directed motion of 20 nm probe particles on specific regions of surfaces that exhibited strong gradients of hydrophobicity. Patterned surfaces were prepared by selective photodegradation (using a contact photomask) of a hydrophobically modified fused silica surface. The lateral distribution of hydrophobicity was characterized in situ using the selective affinity of amphiphilic probes (i.e., hydrophobic interaction microscopy). Probe particles were observed to move unidirectionally from regions of lower to higher to hydrophobicity over distances of approximately 1 microm when the hydrophobicity gradient was greater than d(cos theta)/dx = 0.05 +/- 0.02 microm(-1), where theta is the water contact angle on the bare surface. Only adsorption events were observed on energetically homogeneous surface regions.