Self-trapping of excitons, violation of Condon approximation, and efficient fluorescence in conjugated cycloparaphenylenes

Pinning Excited State Self-Trapping with All-Benzene Trefoil Knot

The synthesis of novel carbon nanostructures with unique topologies expands the landscape of organic molecules, introducing new chemical properties and potential applications. Carbon nanorings, composed of cyclic paraphenylene (CPP) chains, serve as a versatile scaffold for designing materials with unique molecular architectures that impact their optical properties and photoinduced dynamics. These new topologies alter the balance between competing π-conjugation effects, high bending strain energies, and steric hindrances imposed by the rearrangement of their cyclic structures. Here, we explore the photoinduced dynamics of the all-benzene trefoil knot using nonadiabatic excited-state molecular dynamics. We show how its absorption spectra can be modeled by a particle in a box constrained to the trefoil knot geometry, and we analyze the internal conversion process following photoexcitation. Our findings reveal an exciton intraring migration governed by the winding of the paraphenylene chain, ultimately leading to exciton self-trapping at specific high curvature regions of the knot. This behavior contrasts with the nondeterministic exciton self-trapping in the corresponding CPP, where localization occurs randomly across different phenylene units. Our results highlight the ability of molecular knots to control exciton dynamics through curvature, tension, and planarization effects, positioning these materials as promising candidates for future technological applications. This ability to precisely manipulate optical and electronic characteristics is essential for developing more efficient and versatile devices.

Optical Properties of Macrocyclic Chiral Molecules: The Limitations of Ring Size Increase

Chiral macrocyclic molecules are extensively investigated as potential candidates to develop organic emitters exhibiting circularly polarized luminescence (CPL) with large dissymmetry factors (g). Here, based on time-dependent density functional theory calculations, we investigate the relationship between macrocycle size and chiral properties. Our results underline that the rotatory strength (R) of the transition to the first excited state (S0 → S1) increases linearly with the macrocycle loop area. While this evolution could promote high g values in the case of very large rings, it is found that the increase in system size can lead to energetic quasi-degeneracy of several low-lying transitions. In large macrocycles, among those transitions, it is the slightly higher-energy transitions possessing large oscillator strengths but small g values that come to dominate over the S0 → S1 transition. Also, the corresponding decrease in energy spacing among these lowest excited states can trigger a broken symmetry of the S1-state geometry via a pseudo Jahn-Teller effect. Overall, our results highlight that in large macrocycles the CPL can gain in intensity but this occurs at the expense of the g value. Thus, it is critical that the interaction of the S0 → S1 transition with higher-energy states be carefully considered when designing large-size CPL emitters.

meta-Cycloparaphenylenes (mCPPs) with pendant carborane

The design of easily modifiable nanohoops with favourable photophysical properties is crucial for their applications. Here, carborane-based boron-clusters are linked to meta-cycloparaphenylenes (mCPPs) as pendants through an alkyne insertion reaction with decaborane from an mCPP-alkyne precursor. Subsequent deboronation reaction efficiently yields ionic mCPP compounds with a high fluorescence quantum yield (81%) in solution.

Effective Detection of Cu(II) Ions Based on Carbon Dots@Exfoliated Layered Double Hydroxides Composites Fluorescence Probe

A series of carbon dots@exfoliated layered double hydroxides (CDs@LDH) composites were hydrothermally fabricated by Mg/Al LDH and formamide. The results of FTIR, UV-vis, and XPS spectra in company with HRTEM images showed that crystalline nano CDs formed on the single layer of LDH by Mg-C bond. With the increase of solvothermal reaction time from 2 to 6 h, the band gap and the binding energy of aminic and graphitic N species of CDs@LDH composites decreased, whereas the crystallinity increased. The fluorescence peaks of CDs@LDH composites could be deconvoluted into short-wavelength (416 nm) and large-wavelength (443 nm) components by Gaussian function, and the fluorescence intensities of both components enhanced with the extension of the solvothermal reaction time. The simultaneous enhancements of fluorescence lifetime and quantum yield resulted from the relatively high electron density in graphitic nitrogen of CDs@LDH, whereas the reduction of nonradiative rate was due to the high crystallinity in the carbon core of CDs@LDH. A strong exciton-lattice interaction also has been validated based on the excitation and emission spectra of CDs@LDH, so the fluorescence emission of CDs@LDH composite was heavily related to its crystalline carbon core and nitrogen-containing groups. CDs@LDH with high nitrogen-containing exhibited a superior detection property for Cu2+ ion sensing with the linear range of 26.90 ~ 192.20 μM and a limit of detection of 0.1957 μM. The photo-induced electron transfer (PET) process dominated the fluorescence quenching of CDs@LDH by Cu2+ ion since the fluorescence lifetime decreased with the increase of Cu2+ ion concentration.

Tuning Electronic Relaxation of Nanorings Through Their Interlocking

Electronic and vibrational relaxation processes can be optimized and tuned by introducing alternative pathways that channel excess energy more efficiently. An ensemble of interacting molecular systems can help overcome the bottlenecks caused by large energy gaps between intermediate excited states involved in the relaxation process. By employing this strategy, catenanes composed of mechanically interlocked carbon nanostructures show great promise as new materials for achieving higher efficiencies in electronic devices. Herein, we perform nonadiabatic excited state molecular dynamics on different all-benzene catenanes. We observe that catenanes experience faster relaxations than individual units. Coupled catenanes present overlapping energy manifolds that include several electronic excited states spatially localized on the different moieties, increasing the density of states that ultimately improve the efficiency in the energy relaxation. This result suggests the use of catenanes as a viable strategy for tuning the internal conversion rates in a quest for their utilization for new optoelectronic applications.

Pinwheel-like Curved Aromatics from the Cyclotrimerization of Strained Alkyne Cycloparaphenylenes

Carbon nanomaterials composed of curved aromatics, such as carbon nanotubes, are difficult to selectively synthesize and modify precisely. Smaller molecular fragments of curved nanomaterials, such as cycloparaphenylenes, benefit from the precision of bottom-up synthesis, however, efforts to expand the curved molecular framework into even larger structures often rely on restrictive early stage synthetic strategies or difficult to control polymerizations. In this work we report a high yielding, strain-promoted, late-stage modification of a series of [n + 1]CPPs. We show that the conversion of these [n + 1]CPPs into soluble, pinwheel-like multipore carbon nanostructures is achievable via a straightforward and efficient metal-mediated alkyne cyclotrimerization reaction. We provide insight into suitable metals for this transformation, the photophysics of these trimeric molecules, as well as their strain profiles and crystal packing. We also demonstrate the strain-enhanced nature of the reaction under the optimized conditions, showing that strained internal-alkyne [n + 1]CPPs efficiently undergo complete conversion whereas unstrained diphenylacetylene remains completely unreacted. We anticipate that this work will have broader impacts on the study of reactivity in strained-alkyne-containing hydrocarbons, and that access to this new molecular architecture will inspire new research and applications in materials science and related fields.

[n]Cycloparaphenylenes as Compatible Fluorophores for Melt Electrowriting

Fluorescent probes are an indispensable tool in the realm of bioimaging technologies, providing valuable insights into the assessment of biomaterial integrity and structural properties. However, incorporating fluorophores into scaffolds made from melt electrowriting (MEW) poses a challenge due to the sustained, elevated temperatures that this processing technique requires. In this context, [n]cycloparaphenylenes ([n]CPPs) serve as excellent fluorophores for MEW processing with the additional benefit of customizable emissions profiles with the same excitation wavelength. Three fluorescent blends are used with distinct [n]CPPs with emission wavelengths of either 466, 494, or 533 nm, identifying 0.01 wt% as the preferred concentration. It is discovered that [n]CPPs disperse well within poly(ε-caprolactone) (PCL) and maintain their fluorescence even after a week of continuous heating at 80 °C. The [n]CPP-PCL blends show no cytotoxicity and support counterstaining with commonly used DAPI (Ex/Em: 359 nm/457 nm), rhodamine- (Ex/Em: 542/565 nm), and fluorescein-tagged (Ex/Em: 490/515 nm) phalloidin stains. Using different color [n]CPP-PCL blends, different MEW fibers are sequentially deposited into a semi-woven scaffold and onto a solution electrospun membrane composed of [8]CPP-PCL as a contrasting substrate for the [10]CPP-PCL MEW fibers. In general, [n]CPPs are potent fluorophores for MEW, providing new imaging options for this technology.

Nanohoops in membranes: confined supramolecular spaces within phospholipid bilayer membranes

Nanohoops, an exciting class of fluorophores with supramolecular binding abilities, have the potential to become innovative tools within biological imaging and sensing. Given the biological importance of cell membranes, incorporation of macrocyclic materials with the dual capability of fluorescence emission and supramolecular complexation would be particularly interesting. A series of different-sized nanohoops-ethylene glycol-decorated [n]cyclo-para-pyrenylenes (CPYs) (n = 4-8)-were synthesised via an alternate synthetic route which implements a stannylation-based precursor, producing purer material than the previous borylation approach, enabling the growth of single-crystals of the Pt-macrocycle. Reductive elimination of these single-crystals achieved significantly higher selectivity and yields towards smaller ring-sized nanohoops (n = 4-6). The supramolecular binding capabilities of these CPYs were then explored through host-guest studies with a series of polycyclic (aromatic)hydrocarbons, revealing the importance of molecular size, shape, and CH-π contacts for efficient binding. CPYs were incorporated within the hydrophobic layer of lipid bilayer membranes, as confirmed by microscopic imaging and emission spectroscopy, which also demonstrated the size-preferential incorporation of the five-fold nanohoop. Molecular dynamics simulations revealed the position and orientation within the membrane, as well as the unique non-covalent threading interaction between nanohoop and phospholipid.

π-Conjugated Nanohoops: A New Generation of Curved Materials for Organic Electronics

Nanohoops, cyclic association of π-conjugated systems to form a hoop-shaped molecule, have been widely developed in the last 15 years. Beyond the synthetic challenge, the strong interest towards these molecules arises from their radially oriented π-orbitals, which provide singular properties to these fascinating structures. Thanks to their particular cylindrical arrangement, this new generation of curved molecules have been already used in many applications such as host-guest complexation, biosensing, bioimaging, solid-state emission and catalysis. However, their potential in organic electronics has only started to be explored. From the first incorporation as an emitter in a fluorescent organic light emitting diode (OLED), to the recent first incorporation as a host in phosphorescent OLEDs or as charge transporter in organic field-effect transistors and in organic photovoltaics, this field has shown important breakthroughs in recent years. These findings have revealed that curved materials can play a key role in the future and can even be more efficient than their linear counterparts. This can have important repercussions for the future of electronics. Time has now come to overview the different nanohoops used to date in electronic devices in order to stimulate the future molecular designs of functional materials based on these macrocycles.

Synthesis and Photophysical Properties of a Chiral Carbon Nanoring Containing Rubicene

Herein we report the construction of an inherently chiral carbon nanoring, cyclo[7]paraphenylene-2,9-rubicene ([7]CPPRu2,9), by combining rubicene with a C-shaped synthon through the Suzuki-Miyaura coupling reaction. The structure was fully confirmed by high-resolution mass spectroscopies (HR-MS) and various NMR techniques. The photophysical properties were investigated by UV-vis absorption and fluorescence spectroscopy as well as the time-resolved fluorescence decay. Moreover, two enantiomers (M)/(P)-[7]CPPRu2,9 were successfully resolved by recyclable HPLC and studied by CD and CPL spectra.

Thermoelectric Properties of Porphyrin Nano Rings: A Theoretical and Modelling Investigation

Propagation of De Broglie waves through nanomolecular junctions is greatly affected by molecular topology changes, which in turn plays a key role in determining the electronic and thermoelectric properties of source|molecule|drain junctions. The probing and realization of the constructive quantum interference (CQI) and a destructive quantum interference (DQI) are well established in this work. The critical role of quantum interference (QI) in governing and enhancing the transmission coefficient T(E), thermopower (S), power factor (P) and electronic figure of merit (ZelT) of porphyrin nanorings has been investigated using a combination of density functional theory (DFT) methods, a tight binding (Hückel) modelling (TBHM) and quantum transport theory (QTT). Remarkably, DQI not only dominates the asymmetric molecular pathways and lowering T(E), but also improves the thermoelectric properties.

Highly Luminescent Chiral Carbon Nanohoops via Symmetry Breaking with a Triptycene Unit: Bright Circularly Polarized Luminescence and Size-Dependent Properties

Chiral carbon nanohoops with both high fluorescence quantum yield and large luminescence dissymmetry factor are essential to the development of circularly polarized luminescence (CPL) materials. Herein, the rational design and synthesis of a series of highly fluorescent chiral carbon nanohoops TP-[8-13]CPPs via symmetry breaking with a chiral triptycene motif is reported. Theoretical calculations revealed that breaking the symmetry of nanohoops causes a unique size-dependent localization in the highest occupied molecular orbitals (HOMOs) and the lowest unoccupied molecular obtitals (LUMOs) as the increasing of sizes, which is sharply different from those of [n]cycloparaphenylenes. Photophysical investigations demonstrated that TP-[n]CPPs display size-dependent emissions with high fluorescence quantum yields up to 92.9% for TP-[13]CPP, which is the highest value among the reported chiral conjugated carbon nanohoops. The high fluorescence quantum yields are presumably attributed to both the unique acyclic, and radial conjugations and high radiative transition rates, which are further supported by theoretical investigations. Chiroptical studies revealed that chiral TP-[n]CPPs exhibit bright CPL with CPL brightness up to 100.5 M-1 cm-1 for TP-[11]CPP due to the high fluorescence quantum yield. Importantly, the investigations revealed the intrigued size-dependent properties of TP-[n]CPPs with regards to (chir)optical properties, which follow a nice linear relationship versus 1/n. Such a nice linear relationship is not observed in other reported conjugated nanohoops including CPPs.

Carbon Nanomaterial Fluorescent Probes and Their Biological Applications

Fluorescent carbon nanomaterials have broadly useful chemical and photophysical attributes that are conducive to applications in biology. In this review, we focus on materials whose photophysics allow for the use of these materials in biomedical and environmental applications, with emphasis on imaging, biosensing, and cargo delivery. The review focuses primarily on graphitic carbon nanomaterials including graphene and its derivatives, carbon nanotubes, as well as carbon dots and carbon nanohoops. Recent advances in and future prospects of these fields are discussed at depth, and where appropriate, references to reviews pertaining to older literature are provided.

The Synthesis of a Multiple D-A Conjugated Macrocycle and Its Application in Organic Photovoltaic

As a novel class of materials, D-A conjugated macrocycles hold significant promise for chemical science. However, their potential in photovoltaic remains largely untapped due to the complexity of introducing multiple donor and acceptor moieties into the design and synthesis of cyclic π-conjugated molecules. Here, we report a multiple D-A ring-like conjugated molecule (RCM) via the coupling of dimer molecule DBTP-C3 as a template and thiophenes in high yields. RCM exhibits a narrow optical gap (1.33 eV) and excellent thermal stability, and shows a remarkable photoluminescence yield (ΦPL ) of 11.1 % in solution, much higher than non-cyclic analogues. Organic solar cell (OSC) constructed with RCM as electron acceptor shows efficient charge separation at donor-acceptor band offsets and achieves a power conversion efficiency (PCE) of 14.2 %-approximately fourfold higher than macrocycle-based OSCs reported so far. This is partly due to low non-radiative voltage loss down to 0.20 eV and a high electroluminescence yield (ΦEL ) of 4×10-4 . Our findings emphasize the potential of D-A cyclic conjugated molecules in advancing organic photovoltaic technology.

NEXMD v2.0 Software Package for Nonadiabatic Excited State Molecular Dynamics Simulations

We present NEXMD version 2.0, the second release of the NEXMD (Nonadiabatic EXcited-state Molecular Dynamics) software package. Across a variety of new features, NEXMD v2.0 incorporates new implementations of two hybrid quantum-classical dynamics methods, namely, Ehrenfest dynamics (EHR) and the Ab-Initio Multiple Cloning sampling technique for Multiconfigurational Ehrenfest quantum dynamics (MCE-AIMC or simply AIMC), which are alternative options to the previously implemented trajectory surface hopping (TSH) method. To illustrate these methodologies, we outline a direct comparison of these three hybrid quantum-classical dynamics methods as implemented in the same NEXMD framework, discussing their weaknesses and strengths, using the modeled photodynamics of a polyphenylene ethylene dendrimer building block as a representative example. We also describe the expanded normal-mode analysis and constraints for both the ground and excited states, newly implemented in the NEXMD v2.0 framework, which allow for a deeper analysis of the main vibrational motions involved in vibronic dynamics. Overall, NEXMD v2.0 expands the range of applications of NEXMD to a larger variety of multichromophore organic molecules and photophysical processes involving quantum coherences and persistent couplings between electronic excited states and nuclear velocity.

Experimental and theoretical elucidation of SPAAC kinetics for strained alkyne-containing cycloparaphenylenes

Tuning strained alkyne reactivity via organic synthesis has evolved into a burgeoning field of study largely focused on cyclooctyne, wherein physical organic chemistry helps guide rational molecular design to produce molecules with intriguing properties. Concurrent research in the field of carbon nanomaterials has produced new types of strained alkyne macrocycles, such as cycloparaphenyleneacetylenes, that possess uniquely curved aromatic π systems but hover on the edge of stability. In 2018, we introduced a strained alkyne scaffold that marries the synthetic accessibility and stability of cyclooctyne with the curved π system of carbon nanomaterials. These molecules are strained alkyne-containing cycloparaphenylenes (or [n+1]CPPs), which have been shown to possess size-dependent reactivity as well as the classic characteristics of the unfunctionalized parent CPP, such as a tunable HOMO-LUMO gap and bright fluorescence for large sizes. Herein, we elaborate further on this scaffold, introducing two modifications to the original design and fully characterizing the kinetics of the strain-promoted azide-alkyne cycloaddition (SPAAC) for each [n+1]CPP with a model azide. Additionally, we explain how electronic (the incorporation of fluorine atoms) and strain (a meta linkage which heightens local strain at the alkyne) modulations affect SPAAC reactivity via the distortion-interaction computational model. Altogether, these results indicate that through a modular synthesis and rational chemical design, we have developed a new family of tunable and inherently fluorescent strained alkyne carbon nanomaterials.

Modular synthesis, host-guest complexation and solvation-controlled relaxation of nanohoops with donor-acceptor structures

Carbon nanohoops with donor-acceptor (D-A) structures are attractive electronic materials and biological fluorophores, but their synthesis is usually challenging. Moreover, the preparation of D-A nanohoop fluorophores exhibiting high fluorescence quantum yields beyond 500 nm remains a key challenge. This study presents a modular synthetic approach based on an efficient metal-free cyclocondensation reaction that readily produced nine congeners with D-A or donor-acceptor-donor' (D-A-D') structures, one of which is water-soluble. The tailored molecular design of nanohoops enabled a systematic and detailed study of their host-guest complexation with fullerene, optical properties, and charge transfer (CT) dynamics using X-ray crystallography, fluorescence titration, steady and ultrafast transient absorption spectroscopy, and theoretical calculations. The findings revealed intriguing physical properties associated with D-A motifs, such as tight binding with fullerene, moderate fluorescence quantum yields (37-67%) beyond 540 nm, and unique solvation-controlled CT relaxation of D-A-D' nanohoops, where two CT states (D-A and A-D') can be effectively tuned by solvation, resulting in dramatically changed relaxation pathways in different solvents.

Steric Hindrance Governs the Photoinduced Structural Planarization of Cycloparaphenylene Materials

Cycloparaphenylenes ([n]CPPs) and their derivatives are known for the unique size-dependent photophysical properties, which are largely attributed to the structural planarization-associated exciton localization, attracting substantial research attention. In this work, we show that the steric hindrance between neighboring structural units plays a key role in governing the photoinduced global/local structural planarization and electron-hole distribution features of [n]CPP materials, due to the tunable strength of H···H repulsion between neighboring units via structural modification or C-H distance variation as revealed by density functional theory (DFT) and time-dependent DFT calculations. According to our results, steric hindrance controls the manner and also the extent of excited-state structural planarization, where a weak (strong) steric hindrance favors (hinders) structural planarization upon relaxation in the first excited singlet (S₁) state as compared to the ground (S₀)-state structure. Depending on the molecular structures, steric hindrance leads to fully delocalized, partially separated, or more localized electron-hole distributions. For example, via H···H repulsion release by manually shortening the C-H distance or by chemical substitution of C-H with N atoms, the modified [10]CPP structures show fully planarized configurations (each dihedral angle can be less than 2°) and entirely delocalized electron-hole distribution upon photorelaxation. This work provides insights into the structural origin of the unusual photophysical properties of [n]CPPs and shows the promise of steric hindrance tuning in accessing diverse excited-state features in [n]CPP materials.

Exciton-vibrational dynamics induces efficient self-trapping in a substituted nanoring

Cycloparaphenylenes, being the smallest segments of carbon nanotubes, have emerged as prototypes of the simplest carbon nanohoops. Their unique structure-dynamics-optical properties relationships have motivated a wide variety of synthesis of new related nanohoop species. Studies of how chemical changes, introduced in these new materials, lead to systems with new structural, dynamics and optical properties, expand their functionalities for optoelectronics applications. Herein, we study the effect that conjugation extension of a cycloparaphenylene through the introduction of a satellite tetraphenyl substitution has on its structural and dynamical properties. Our non-adiabatic excited state molecular dynamics simulations suggest that this substitution accelerates the electronic relaxation from the high-energy band to the lowest excited state. This is partially due to efficient conjugation achieved between specific phenyl units as introduced by the tetraphenyl substitution. We observe a particular exciton redistribution during relaxation, in which the tetraphenyl substitution plays a significant role. As a result, an efficient inter-band energy transfer takes place. Besides, the observed phonon-exciton interplay induces a significant exciton self-trapping. Our results encourage and guide the future studies of new phenyl substitutions in carbon nanorings with desired optoelectronic properties.

Nonadiabatic Molecular Dynamics Simulations Based on Time-Dependent Density Functional Tight-Binding Method

Nonadiabatic excited-state molecular dynamics underpin many photophysical and photochemical phenomena, such as exciton dynamics, charge separation and transport. In this work, we present an efficient nonadiabatic molecular dynamic (NAMD) simulation method based on time-dependent density functional tight-binding (TDDFTB) theory. Specifically, the adiabatic electronic structure, an essential NAMD input, is described at the TDDFTB level. The nonadiabatic effects originating from the coupled motions of electrons and nuclei are treated by the trajectory surface hopping algorithm. To improve the computational efficiency, nonadiabatic couplings between excited states within the TDDFTB method are derived and implemented using an analytical approach. Further, the time-dependent nonadiabatic coupling scalars are calculated based on the overlap between molecular orbitals rather than the Slater determinants to speed up the simulations. In addition, the electronic decoherence scheme and a state reassigned unavoided crossings algorithm, which has been implemented in the NEXMD software, are used to improve the accuracy of the simulated dynamics and handle trivial unavoided crossings. Finally, the photoinduced nonadiabatic dynamics of a benzene molecule are simulated to demonstrate our implementation. The results for excited state NAMD simulations of benzene molecule based on TDDFTB method compare well that obtained with numerically expensive time-dependent density functional theory. The proposed methodology provides an attractive theoretical simulation tool for predicting the photophysical and photochemical properties of complex materials.

Bethe Salpeter Equation Spectra for Very Large Systems

We present a highly efficient method for the extraction of optical properties of very large molecules via the Bethe-Salpeter equation. The crutch of this approach is the calculation of the action of the effective Coulombic interaction, $W$, through a stochastic TD Hartree propagation, which uses only 10 stochastic orbitals rather than propagating the full sea of occupied states. This leads to a scaling that is at most cubic in system size, with trivial parallelization of the calculation. We apply this new method to calculate the spectra and electronic density of the dominant excitons of a carbon-nanohoop bound fullerene system with 520 electrons, using less than 4000 core hours.

Fluorescent cyclophanes and their applications

With the serendipitous discovery of crown ethers by Pedersen more than half a century ago and the subsequent introduction of host-guest chemistry and supramolecular chemistry by Cram and Lehn, respectively, followed by the design and synthesis of wholly synthetic cyclophanes-in particular, fluorescent cyclophanes, having rich structural characteristics and functions-have been the focus of considerable research activity during the past few decades. Cyclophanes with remarkable emissive properties have been investigated continuously over the years and employed in numerous applications across the field of science and technology. In this Review, we feature the recent developments in the chemistry of fluorescent cyclophanes, along with their design and synthesis. Their host-guest chemistry and applications related to their structure and properties are highlighted.

Dynamics of Excitons in Conjugated Molecules and Organic Semiconductor Systems

The exciton, an excited electron-hole pair bound by Coulomb attraction, plays a key role in photophysics of organic molecules and drives practically important phenomena such as photoinduced mechanical motions of a molecule, photochemical conversions, energy transfer, generation of free charge carriers, etc. Its behavior in extended π-conjugated molecules and disordered organic films is very different and very rich compared with exciton behavior in inorganic semiconductor crystals. Due to the high degree of variability of organic systems themselves, the exciton not only exerts changes on molecules that carry it but undergoes its own changes during all phases of its lifetime, that is, birth, conversion and transport, and decay. The goal of this review is to give a systematic and comprehensive view on exciton behavior in π-conjugated molecules and molecular assemblies at all phases of exciton evolution with emphasis on rates typical for this dynamic picture and various consequences of the above dynamics. To uncover the rich variety of exciton behavior, details of exciton formation, exciton transport, exciton energy conversion, direct and reverse intersystem crossing, and radiative and nonradiative decay are considered in different systems, where these processes lead to or are influenced by static and dynamic disorder, charge distribution symmetry breaking, photoinduced reactions, electron and proton transfer, structural rearrangements, exciton coupling with vibrations and intermediate particles, and exciton dissociation and annihilation as well.

A Modular Synthesis of Substituted Cycloparaphenylenes

Herein, we report a modular synthesis providing access to substituted cycloparaphenylenes (CPPs) of different sizes. A key synthon introducing two geminal ester units was efficiently prepared by [2+2+2] cycloaddition. This building block can be conveniently converted to macrocyclic precursors controlling the ring size of the final CPP. Efficient reductive aromatization through single-electron transfer provided the substituted nanohoops in a straightforward manner. The tBu ester substitution pattern enables a tube-like arrangement in the solid-state governed by van der Waals interactions that exhibits one of the tightest packings of CPPs in tube direction, thus opening new avenues in the crystal design of CPPs.

Naphthodithiophene Diimide Based Chiral π-Conjugated Nanopillar Molecules

The synthesis, structures, and properties of [4]cyclonaphthodithiophene diimides ([4]C-NDTIs) are described. NDTIs as important n-type building blocks were catenated in the α-positions of thiophene rings via an unusual electrochemical-oxidation-promoted macrocyclization route. The thiophene-thiophene junction in [4]C-NDTIs results in an ideal pillar shape. This interesting topology, along with appealing electronic and optical properties inherited from the NDTI units, endows the [4]C-NDTIs with both near-infrared (NIR) light absorptions, strong excitonic coupling, and tight encapsulation of C₆₀ . Stable orientations of the NDTI units in the nanopillars lead to stable inherent chirality, which enables detailed circular dichroism studies on the impact of isomeric structures on π-conjugation. Remarkably, the [4]C-NDTIs maintain the strong π-π stacking abilities of NDTI units and thus adopt two-dimensional (2D) lattice arrays at the molecular level. These nanopillar molecules have great potential to mimic natural photosynthetic systems for the development of multifunctional organic materials.

Recent Advances in Dimeric Cycloparaphenylenes as Nanotube Fragments

Since the discovery of cycloparaphenylenes in 2008, the chemical synthesis of more-complicated molecular systems with curved π-surfaces has been vigorously sought, giving rise to a plethora of new exciting molecules with various topologies and functions. This Synpacts article briefly summarizes recent examples of carbon nanohoop dimers, highlighting three examples as nanotube fragments. Their synthesis, isomerization, photophysical properties, and host–guest chemistry are discussed.

1 Introduction

2 Synthetic Strategy toward Nanotube Dimers

3 Isomerization Dynamics of Nanotube Dimers

4 Photophysical Properties of Nanotube Dimers

5 Host–Guest Chemistry of Nanotube Dimers

6 Conclusions

A Highly Strained All-Phenylene Conjoined Bismacrocycle

Herein, we report the precise synthesis of a 3D highly strained all-phenylene bismacrocycle, termed conjoined (1,4)[10]cycloparaphenylenophane (SCPP[10]). This structure consists of a twisted benzene ring which is bridged twice by phenylene units anchored in two para-positions. The conjoined structure of SCPP[10] was confirmed in real space at the atomic scale by scanning tunneling microscopy. Theoretical calculations indicate that this bismacrocycle has a very high strain energy of 110.59 kcal mol^-1 and the largest interphenylene torsion angle of 46.07° caused by multiple repulsive interactions. Furthermore, a 1:2 host-guest complex of SCPP[10] and [6,6]-phenyl-C₆₁ -butyric acid methyl ester was investigated, which represents the first peanut-shaped 1:2 host-guest complex based on bismacrocycles.

Construction of a double-walled carbon nanoring

The nanoring structure of cycloparaphenylenes (CPPs) can be considered as the shortest fragment of a carbon nanotube. Herein, we successfully prepared a double-walled carbon nanoring of [6]CPP⊂[12]CPP, which can be regarded as the shortest double-walled carbon nanotube. [6]CPP⊂[12]CPP was constructed through the supramolecular assembly, and its crystallographic structure was unambiguously determined by single-crystal X-ray diffraction. The host-guest interaction and charge transfer in [6]CPP⊂[12]CPP were disclosed by UV-Vis absorption, fluorescence, and electrochemical studies. Electron paramagnetic resonance (EPR) spectroscopy disclosed the stability of the [6]CPP⊂[12]CPP cation radical, whose unpaired spin was fully delocalized on the inner [6]CPP and well protected by outer [12]CPP. Moreover, [6]CPP⊂[12]CPP shows highly enhanced photoconductivity and photocurrent under light irradiation compared to those of pristine monomers. The self-assembly behavior of [6]CPP⊂[12]CPP was also studied, and it was found that [6]CPP⊂[12]CPP molecules tend to form a square rod structure in the DMF solution. Thus, these results demonstrate that this double-walled carbon nanoring material has a great potential application in photoelectronic devices and organic semiconductors.

Exciton Spatial Dynamics and Self-Trapping in Carbon Nanocages

Three-dimensional cage-shaped molecules formed from chainlike structures hold potential as unique optoelectronic materials and host compounds. Their optical, structural, and dynamical features are tunable by changes in shape and size. We perform a comparison of these properties for three sizes of strained conjugated [n.n.n]carbon nanocages composed of three paraphenylene chains (bridges) of length n = 4, 5, or 6. The exciton intramolecular redistribution occurring during nonradiative relaxation has been explored using nonadiabatic excited-state molecular dynamics. Our results provide atomistic insight into the conformational features associated with the observed red- and blue-shift trends in the absorption and fluorescence spectra, respectively, with increasing nanocage size. Their internal conversion processes involve intramolecular energy transfer that leads to exciton self-trapping on a few phenylene units at the center of a single bridge. The dependence of these dynamical features on the size of the nanocage can be used to tune their host-guest chemical properties and their use for organic electronics and catenane-like applications.

A BN-Doped Cycloparaphenylene Debuts

The first example of a BN-doped cycloparaphenylene BN-[10]CPP was synthesized and characterized. Its reactivity and photophysical properties were evaluated in direct comparison to its carbonaceous analogues Mes-[10]CPP and [10]CPP. While the photophysical properties of BN-[10]CPP remains similar to its carbonaceous analogues, the electronic structure changes associated with the introduction of a 1,2-azaborine BN heterocycle into a CPP scaffold enables facile and selective late-stage functionalizations that cannot be accomplished with carbonaceous CPPs. Specifically, Ir-catalyzed hydrogenation of BN-[10]CPP selectively reduces the BN heterocyclic ring, which upon hydrolysis produces a rare example of a macrocyclic paraphenylene 6 incorporating the versatile ketone functionality within the macrocyclic ring.

Effect of curvature and placement of donor and acceptor units in cycloparaphenylenes: a computational study

Cycloparaphenylenes have promise as novel fluorescent materials. However, shifting their fluorescence beyond 510 nm is difficult. Herein, we computationally explore the effect of incorporating electron accepting and electron donating units on CPP photophysical properties at the CAM-B3LYP/6-311G** level. We demonstrate that incorporation of donor and acceptor units may shift the CPP fluorescence as far as 1193 nm. This computational work directs the synthesis of bright red-emitting CPPs. Furthermore, the nanohoop architecture allows for interrogation of strain effects on common conjugated polymer donor and acceptor units. Strain results in a bathochromic shift versus linear variants, demonstrating the value of using strain to push the limits of low band gap materials.

Ultrafast Exciton Self-Trapping and Delocalization in Cycloparaphenylenes: The Role of Excited-State Symmetry in Electron-Vibrational Coupling

Upon photon absorption, π-conjugated organics are apt to undergo ultrafast structural reorganization via electron-vibrational coupling during non-adiabatic transitions. Ultrafast nuclear motions modulate local planarity and quinoid/benzenoid characters within conjugated backbones, which control primary events in the excited states, such as localization, energy transfer, and so on. Femtosecond broadband fluorescence upconversion measurements were conducted to investigate exciton self-trapping and delocalization in cycloparaphenylenes as ultrafast structural reorganizations are achieved via excited-state symmetry-dependent electron-vibrational coupling. By accessing two high-lying excited states, one-photon and two-photon allowed states, a clear discrepancy in the initial time-resolved fluorescence spectra and the temporal dynamics/spectral evolution of fluorescence spectra were monitored. Combined with quantum chemical calculations, a novel insight into the effect of the excited-state symmetry on ultrafast structural reorganization and exciton self-trapping in the emerging class of π-conjugated materials is provided.

Controlling Defect-State Photophysics in Covalently Functionalized Single-Walled Carbon Nanotubes

ConspectusSingle-walled carbon nanotubes (SWCNTs) show promise as light sources for modern fiber optical communications due to their emission wavelengths tunable via chirality and diameter dependency. However, the emission quantum yields are relatively low owing to the existence of low-lying dark electronic states and fast excitonic diffusion leading to carrier quenching at defects. Covalent functionalization of SWCNTs addresses this problem by brightening their infrared emission. Namely, introduction of sp³-hybridized defects makes the lowest energy transitions optically active for some defect geometries and enables further control of their optical properties. Such functionalized SWCNTs are currently the only material exhibiting room-temperature single photon emission at telecom relevant infrared wavelengths. While this fluorescence is strong and has the right wavelength, functionalization introduces a variety of emission peaks resulting in spectrally broad inhomogeneous photoluminescence that prohibits the use of SWCNTs in practical applications. Consequently, there is a strong need to control the emission diversity in order to render these materials useful for applications. Recent experimental and computational work has attributed the emissive diversity to the presence of multiple localized defect geometries each resulting in distinct emission energy. This Account outlines methods by which the morphology of the defect in functionalized SWCNTs can be controlled to reduce emissive diversity and to tune the fluorescence wavelengths. The chirality-dependent trends of emission energies with respect to individual defect morphologies are explored. It is demonstrated that defect geometries originating from functionalization of SWCNT carbon atoms along bonds with strong π-orbital mismatch are favorable. Furthermore, the effect of controlling the defect itself through use of different chemical groups is also discussed. Such tunability is enabled due to the formation of specific defect geometries in close proximity to other existing defects. This takes advantage of the changes in π-orbital mismatch enforced by existing defects and the resulting changes in reactivities toward formation of specific defect morphologies. Furthermore, the trends in emissive energies are highly dependent on the value of mod(n-m,3) for an (n,m) tube chirality. These powerful concepts allow for a targeted formation of defects that emit at desired energies based on SWCNT single chirality enriched samples. Finally, the impact of functionalization with specific types of defects that enforce certain defect geometries due to steric constraints in bond lengths and angles to the SWCNT are discussed. We further relate to a similar effect that is present in systems where high density of surface defects is formed due to high reactant concentration. The outlined strategies suggested by simulations are instrumental in guiding experimental efforts toward the generation of functionalized SWCNTs with tunable emission energies.

Photoexcited energy relaxation and vibronic couplings in π-conjugated carbon nanorings

Conjugated carbon nanorings exhibit unique photophysical properties that, combined with their tunable sizes and conformations, make them suitable for a variety of practical applications. These properties are intimately associated to their strained, bent and sterically hindered cyclic structures. Herein we perform a comparative analysis of the photoinduced dynamics in carbon nanorings composed of nine phenyl units([9]CPP) and nine naphthyl units ([9]CN) respectively. The sterically demanding naphthyl units lead to large dihedral angles between neighboring units. Nevertheless, the ultrafast electronic and vibrational energy relaxation and redistribution is found to be similar for both systems. We observe that vibronic couplings, introduced by nonadiabatic energy transfer between electronic excited states, ensure the intramolecular vibrational energy redistribution through specific vibrational modes. The comparative impact of the internal conversion process on the exciton spatial localization and intra-ring migration indicates that naphthyl units in [9]CN achieve more efficient but less dynamical self-trapping compared to that of phenyl units in [9]CPP. That is, during the photoinduced process, the exciton in [9]CN is more static and localized than the exciton in [9]CPP. The internal conversion processes take place through a specific set of middle- to high-frequency normal modes, which directly influence the spatial exciton redistribution during the internal conversion, self-trapping and intra-ring migration.

Electronic Energy Relaxation in a Photoexcited Fully Fused Edge-Sharing Carbon Nanobelt

Carbon nanobelts are cylindrical molecules composed of fully fused edge-sharing arene rings. Because of their aesthetically appealing structures, they acquire unusual optoelectronic properties that are potentially suitable for a range of applications in nanoelectronics and photonics. Nevertheless, the very limited success of their synthesis has led to their photophysical properties remaining largely unknown. Compared to that of carbon nanorings (arenes linked by single bonds), the strong structural rigidity of nanobelts prevents significant deformations away from the original high-symmetry conformation and, therefore, impacts their photophysical properties. Herein, we study the photoinduced dynamics of a successfully synthesized belt segment of (6,6)CNT (carbon nanotube). Modeling this process with nonadiabatic excited state molecular dynamics simulations uncovers the critical role played by the changes in excited state wave function localization on the different types of carbon atoms. This allows a detailed description of the excited state dynamics and spatial exciton evolution throughout the nanobelt scaffold. Our results provide detailed information about the excited state electronic properties and internal conversion rates that is potentially useful for designing nanobelts for nanoelectronic and photonic applications.

Modeling nonadiabatic dynamics in condensed matter materials: some recent advances and applications

This review focuses on recent developments in the field of nonadiabatic molecular dynamics (NA-MD), with particular attention given to condensed-matter systems. NA-MD simulations for small molecular systems can be performed using high-level electronic structure (ES) calculations, methods accounting for the quantization of nuclear motion, and using fewer approximations in the dynamical methodology itself. Modeling condensed-matter systems imposes many limitations on various aspects of NA-MD computations, requiring approximations at various levels of theory-from the ES, to the ways in which the coupling of electrons and nuclei are accounted for. Nonetheless, the approximate treatment of NA-MD in condensed-phase materials has gained a spin lately in many applied studies. A number of advancements of the methodology and computational tools have been undertaken, including general-purpose methods, as well as those tailored to nanoscale and condensed matter systems. This review summarizes such methodological and software developments, puts them into the broader context of existing approaches, and highlights some of the challenges that remain to be solved.

Non-adiabatic Excited-State Molecular Dynamics: Theory and Applications for Modeling Photophysics in Extended Molecular Materials

Optically active molecular materials, such as organic conjugated polymers and biological systems, are characterized by strong coupling between electronic and vibrational degrees of freedom. Typically, simulations must go beyond the Born-Oppenheimer approximation to account for non-adiabatic coupling between excited states. Indeed, non-adiabatic dynamics is commonly associated with exciton dynamics and photophysics involving charge and energy transfer, as well as exciton dissociation and charge recombination. Understanding the photoinduced dynamics in such materials is vital to providing an accurate description of exciton formation, evolution, and decay. This interdisciplinary field has matured significantly over the past decades. Formulation of new theoretical frameworks, development of more efficient and accurate computational algorithms, and evolution of high-performance computer hardware has extended these simulations to very large molecular systems with hundreds of atoms, including numerous studies of organic semiconductors and biomolecules. In this Review, we will describe recent theoretical advances including treatment of electronic decoherence in surface-hopping methods, the role of solvent effects, trivial unavoided crossings, analysis of data based on transition densities, and efficient computational implementations of these numerical methods. We also emphasize newly developed semiclassical approaches, based on the Gaussian approximation, which retain phase and width information to account for significant decoherence and interference effects while maintaining the high efficiency of surface-hopping approaches. The above developments have been employed to successfully describe photophysics in a variety of molecular materials.

Linear and Radial Conjugation in Extended π-Electron Systems

We describe the synthesis and electronic properties of new π-conjugated small molecules and polymers that combine the linear intramolecular conjugation pathways commonly associated with organic electronic materials with the emerging properties of radial conjugation found in cycloparaphenylenes (CPPs) and other curved π-surfaces. Using arylene ethynylenes as prototypical linear segments and [6]/[8]CPP as the radial segments, we demonstrate the formation of new electronic states that are not simply additive responses from the individual components. Quantum chemical calculations of model oligomeric structures reveal these electronic processes to arise from the hybrid nature of wave function delocalization over the linear and radial contributors in the photophysically relevant electronic states.