AuPt Alloy Nanostructures with Tunable Composition and Enzyme-like Activities for Colorimetric Detection of Bisulfide

Oxidative stress modulating nanomaterials and their biochemical roles in nanomedicine

Many pathological conditions are predominantly associated with oxidative stress, arising from reactive oxygen species (ROS); therefore, the modulation of redox activities has been a key strategy to restore normal tissue functions. Current approaches involve establishing a favorable cellular redox environment through the administration of therapeutic drugs and redox-active nanomaterials (RANs). In particular, RANs not only provide a stable and reliable means of therapeutic delivery but also possess the capacity to finely tune various interconnected components, including radicals, enzymes, proteins, transcription factors, and metabolites. Here, we discuss the roles that engineered RANs play in a spectrum of pathological conditions, such as cancer, neurodegenerative diseases, infections, and inflammation. We visualize the dual functions of RANs as both generator and scavenger of ROS, emphasizing their profound impact on diverse cellular functions. The focus of this review is solely on inorganic redox-active nanomaterials (inorganic RANs). Additionally, we deliberate on the challenges associated with current RANs-based approaches and propose potential research directions for their future clinical translation.

Laser Irradiation Induced Electronic Structure Modulation of the Palladium-Based Nanosheets for Efficient Electrocatalysts

Palladium nanosheets (Pd NSs) are widely used as electrocatalysts due to their high atomic utilization efficiency, and long-term stability. Here, the electronic structure modulation of the Pd NSs is realized by a femtosecond laser irradiation strategy. Experimental results indicate that laser irradiation induces the variation in the atomic structures and the macrostrain effects in the Pd NSs. The electronic structure of Pd NSs is modulated by laser irradiation through the balancing between Au-Pd charge transfer and the macros-strain effects. Finite element analysis (FEA) indicates that the lattice of the nanostructures undergoes fast heating and cooling during laser irradiation. The structural evolution mechanism is disclosed by a combined FEA and molecule dynamics (MD) simulation. These results coincide well with the experimental results. The L-AuPd NSs exhibit excellent mass activity and specific activity of 7.44 A mg-1 Pd and 18.70 mA cm-2 toward ethanol oxidation reaction (EOR), 4.3 and 4.4 times higher than the commercial Pd/C. The 2500-cycle accelerated durability (ADT) test confirms the outstanding catalytic stability of the L-AuPd NSs. Density functional theory (DFT) calculations reveal the catalytic mechanism. This unique strategy provides a new pathway to design the ultrathin nanosheet-based materials with excellent performance.

Structural Control Enables Catalytic and Electrocatalytic Activity of Porous Tetrametallic Nanorods

Integrating more than one type of metal into a nanoparticle that has a well-defined morphology and composition expands the functionalities of nanocatalysts. For a metal core/porous multimetallic shell nanoparticle, the availability of catalytically active surface sites and molecular mass transport can be enhanced, and the multielemental synergy can facilitate intraparticle charge transport. In this work, a reliable and robust synthesis of such a functional tetrametallic nanoparticle type is presented, where a micro- and mesoporous PdPtIr shell is grown on Au nanorods. The effect of critical synthesis parameters, namely temperature and the addition of HCl are investigated on the hydrodynamic size of the micellar pore template as well as on the stability of the metal chloride complexes and various elemental analysis techniques prove composition of the porous multimetallic shell. Due to the synergistic properties, the tetrametallic nanorods possess extensive negative surface charge making them a promising catalyst in reduction reactions. Dye degradation as well as the conversion of p-nitrophenol to p-aminophenol is catalyzed by the supportless nanorods without light illumination. By depositing the particles onto conductive substrates, the nanostructured electrodes show promising electrocatalytic activity in ethanol oxidation reaction. The nanocatalyst presents excellent morphological stability during all the catalytic test reactions.

Synthesis, Structural Analysis, and Peroxidase-Mimicking Activity of AuPt Branched Nanoparticles

Bimetallic nanomaterials have generated significant interest across diverse scientific disciplines, due to their unique and tunable properties arising from the synergistic combination of two distinct metallic elements. This study presents a novel approach for synthesizing branched gold-platinum nanoparticles by utilizing poly(allylamine hydrochloride) (PAH)-stabilized branched gold nanoparticles, with a localized surface plasmon resonance (LSPR) response of around 1000 nm, as a template for platinum deposition. This approach allows precise control over nanoparticle size, the LSPR band, and the branching degree at an ambient temperature, without the need for high temperatures or organic solvents. The resulting AuPt branched nanoparticles not only demonstrate optical activity but also enhanced catalytic properties. To evaluate their catalytic potential, we compared the enzymatic capabilities of gold and gold-platinum nanoparticles by examining their peroxidase-like activity in the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). Our findings revealed that the incorporation of platinum onto the gold surface substantially enhanced the catalytic efficiency, highlighting the potential of these bimetallic nanoparticles in catalytic applications.

Layer-By-Layer Designed Spark-Type AuCuPt Alloy with Robust Broadband Absorption to Enhance Sensitivity in Flexible Detection of Estriol by a Lateral Flow Immunoassay

Excessive intake of estrogen poses significant health risks to the human body; hence, there is a necessity to develop rapid detection methods to monitor its levels of addition. Gold nanoparticles (AuNPs), commonly utilized as colorimetric signal labels, find extensive application in lateral flow immunoassay (LFIA). However, the detection sensitivity of traditional AuNPs-LFIA is typically constrained by low molar extinction coefficients and reliance on a single signal. Herein, in this work, unique spark-type AuCuPt nanoflowers modified with tannic acid (AuCuPt@TA) were precisely designed by reasonable layer-by-layer element composition and green modification. The obtained AuCuPt displays robust broadband absorption spanning the visible to near-infrared spectrum, showcasing a notable molar extinction coefficient of 2.38 × 1012 M-1 cm-1 and a photothermal conversion efficiency of 48.5%. Based on this, selecting estriol (E3) as a model analyte, colorimetric/photothermal dual-signal LFIA (CLFIA and PLFIA) was developed. Limits of detection (LOD) of the CLFIA and PLFIA were achieved at 0.033 ng mL-1 and 0.021 ng mL-1, respectively, which represent a 9.3- and 14.6-fold improvement compared to the visual LOD of AuNPs-LFIA. Moreover, the application feasibility of the immunoassay was further evaluated in the milk and pork with satisfactory recoveries ranging from 86.21% to 117.91%. Thus, this work has enhanced the performance of LFIA for E3 detection and exhibited enormous potential for other sensing platform construction.

Nanozyme based colorimetric detection of biogenic gaseous H2S using Ag@Au core/shell nanoplates with peroxidase-like activity

A highly sensitive and facile colorimetric assay is introduced for detecting biogenic gaseous H2S using peroxidase (POD)-like catalytic activity of silver core/gold shell nanoplates (Ag@Au NPls). H2S can react with Ag@Au NPls to form Ag2S or Au2S on their surface, which can reduce POD-like activity of Ag@Au NPls and consequently decrease the absorbance at 650 nm due to oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide (H2O2). For in situ and multiple detection of H2S, we utilized a microplate cover with 24 polydimethylsiloxane inner wells where Ag@Au NPls reacted with H2S gas followed by treatment with TMB/H2O2. As a result, the change in absorbance at 650 nm showed a linear relationship with the H2S concentration in the range 0.33 to 2.96 μM (0.36 absorbance/μM H2S in PBS, R2 = 0.994) with a limit of detection of 263 nM and a relative standard deviation of 4.4%. Finally, this assay could detect H2S released from Eikenella corrodens, used as a model bacterium, in a short time (20 min) or at a low number of bacteria (1 × 104 colony forming units/mL). Therefore, this assay is expected to be applied for the study of H2S signaling in bacterial physiology, as well as measure H2S production released from other oral bacteria that cause halitosis and oral diseases, leading to the subsequent diagnosis.

Platinum-based nanodendrites as glucose oxidase-mimicking surrogates

Catalytic conversion of glucose represents an interesting field of research with multiple applications. From the biotechnology point of view, glucose conversion leads to the fabrication of different added-value by-products. In the field of nanocatalytic medicine, the reduction of glucose levels within the tumor microenvironment (TME) represents an appealing approach based on the starvation of cancer cells. Glucose typically achieves high conversion rates with the aid of glucose oxidase (GOx) enzymes or by fermentation. GOx is subjected to degradation, possesses poor recyclability and operates under very specific reaction conditions. Gold-based materials have been typically explored as inorganic catalytic alternatives to GOx in order to convert glucose into building block chemicals of interest. Still, the lack of sufficient selectivity towards certain products such as gluconolactone, the requirement of high fluxes of oxygen or the critical size dependency hinder their full potential, especially in liquid phase reactions. The present work describes the synthesis of platinum-based nanodendrites as novel enzyme-mimicking inorganic surrogates able to convert glucose into gluconolactone with outstanding selectivity values above 85%. We have also studied the enzymatic behavior of these Pt-based nanozymes using the Michaelis-Menten and Lineweaver-Burk models and used the main calculation approaches available in the literature to determine highly competitive glucose turnover rates for Pt or Pt-Au nanodendrites.

Catechol-Modified and MnO2-Nanozyme-Reinforced Hydrogel with Improved Antioxidant and Antibacterial Capacity for Periodontitis Treatment

Periodontitis is an inflammatory disease characterized by tooth loss and alveolar bone resorption. Bacteria are the original cause of periodontitis, and excess reactive oxygen species (ROS) encourage and intensify inflammation. In this study, a mussel-inspired and MnO2 NPs-reinforced adhesive hydrogel capable of alleviating periodontitis with improved antibacterial and antioxidant abilities was developed. The hydrogel was created by combining polyvinyl alcohol (PVA), 3,4-dihydroxy-d-phenylalanine (DOPA), and MnO2 nanoparticles (NPs) (named PDMO hydrogel). The hydrogel was demonstrated to be able to scavenge various free radicals (including total ROS─O2•- and OH•) and relieve the hypoxia in an inflammatory microenvironment by scavenging excess ROS and generating O2 due to its superoxide dismutase (SOD)/catalase (CAT)-like activity. Besides, under 808 nm near-infrared (NIR) light, the photothermal performance of the PDMO hydrogel displayed favorable antibacterial and antibiofilm effects toward Escherichia coli, Staphylococcus aureus, and Porphyromonas gingivalis (up to nearly 100% antibacterial rate). Furthermore, the PDMO hydrogel exhibited favorable therapeutic efficacy in alleviating gingivitis in Sprague-Dawley rats, even comparable to or better than the commercial PERIO. In addition, in the periodontitis models, the PDMO2 group showed the height of the residual alveolar bone and the smallest shadow area of low density among other groups, indicating the positive role of the PDMO2 hydrogel in bone regeneration. Finally, the biosafety of the PDMO hydrogel was comprehensively investigated, and the hydrogel was demonstrated to have good biocompatibility. Therefore, the developed PDMO hydrogel provided an effective solution to resolve biofilm recolonization and oxidative stress in periodontitis and could be a superior candidate for local drug delivery system in the clinical management of periodontitis with great potential for future clinical translation.

Air-Derived Inhibitor of Nanozymes

Nanozymes are functional nanomaterials with enzyme-mimicking activities, which have found wide applications in various fields. Investigation on nanozyme inhibitors not only helps to apply nanozymes in a controlled manner but also deepens our insight into the catalysis mechanism. Herein, we report an inorganic ion inhibitor, HCO₃^-, which can significantly inhibit the alkaline phosphatase-mimicking activities of Ce₆ cluster-based metal-organic framework (Ce-MOF) nanozymes. The inhibition of adsorption of the negatively charged fluorescence sodium on Ce₆ clusters in Ce-MOF nanoparticles (NPs) by HCO₃^- proves that HCO₃^- ions occupy and deactivate Ce₆ clusters (i.e., catalytic active sites), leading to the activity inhibition of Ce-MOF nanozymes. Tris(hydroxymethyl)aminomethane hydrochloride (Tris-HCl) buffer is widely employed as the alkaline reaction medium. HCO₃^- ions can be formed in Tris-HCl buffer through adsorption of CO₂ in the air during storage in a sealed tube, which significantly inhibits the activity of Ce-MOF nanozymes. To our knowledge, this study is the first to demonstrate an air-derived inhibitor of nanozymes.

Non-Enzymatically Colorimetric Bilirubin Sensing Based on the Catalytic Structure Disruption of Gold Nanocages

As an essential indicator of liver function, bilirubin is of great significance for clinical diagnosis. A non-enzymatic sensor has been established for sensitive bilirubin detection based on the bilirubin oxidation catalyzed by unlabeled gold nanocages (GNCs). GNCs with dual-localized surface plasmon resonance (LSPR) peaks were prepared by a one-pot method. One peak around 500 nm was ascribed to gold nanoparticles (AuNPs), and the other located in the near-infrared region was the typical peak of GNCs. The catalytic oxidation of bilirubin by GNCs was accompanied by the disruption of cage structure, releasing free AuNPs from the nanocage. This transformation changed the dual peak intensities in opposite trend, and made it possible to realize the colorimetric sensing of bilirubin in a ratiometric mode. The absorbance ratios showed good linearity to bilirubin concentrations in the range of 0.20~3.60 μmol/L with a detection limit of 39.35 nM (3σ, n = 3). The sensor exhibited excellent selectivity for bilirubin over other coexisting substances. Bilirubin in real human serum samples was detected with recoveries ranging from 94.5 to 102.6%. The method for bilirubin assay is simple, sensitive and without complex biolabeling.

Structure design mechanisms and inflammatory disease applications of nanozymes

Nanozymes are artificial enzymes with high catalytic activity, low cost, and good biocompatibility, and have received ever-increasing attention in recent years. Various inorganic and organic nanoparticles have been found to exhibit enzyme-like activities and are used as nanozymes for diverse biomedical applications ranging from tumor imaging and therapeutics to detection. However, their further clinical applications are hindered by the potential toxicity and long-term retention of nanomaterials in vivo. Clarifying the catalytic mechanism of nanozymes and identifying the key factors responsible for their behavior can guide the design of nanozyme structure, enlighten the ways to improve their enzyme-like activities, and minimize the dosage of nanozymes, leading to reduced toxicity to the human body for a real biomedical application prospect. In particular, inflammation occurring in numerous diseases is closely related to reactive oxygen species, and the active oxygen scavenging ability of nanozymes potentially exerts excellent therapeutic effects on inflammatory diseases. In this review, we systematically summarize the structure-activity relationship of nanozymes, including regulation strategies for size and morphology, surface structure, and composition. Based on the structure-activity mechanisms, a series of chemically designed nanozymes developed to target various inflammatory diseases are briefly summarized.

Synthesis of Gold-Platinum Core-Shell Nanoparticles Assembled on a Silica Template and Their Peroxidase Nanozyme Properties

Bimetallic nanoparticles are important materials for synthesizing multifunctional nanozymes. A technique for preparing gold-platinum nanoparticles (NPs) on a silica core template (SiO₂@Au@Pt) using seed-mediated growth is reported in this study. The SiO₂@Au@Pt exhibits peroxidase-like nanozyme activity has several advantages over gold assembled silica core templates (SiO₂@Au@Au), such as stability and catalytic performance. The maximum reaction velocity (V_max) and the Michaelis–Menten constants (K_m) were and 2.1 × 10⁻¹⁰ M⁻¹∙s⁻¹ and 417 µM, respectively. Factors affecting the peroxidase activity, including the quantity of NPs, solution pH, reaction time, and concentration of tetramethyl benzidine, are also investigated in this study. The optimization of SiO₂@Au@Pt NPs for H₂O₂ detection obtained in 0.5 mM TMB; using 5 µg SiO₂@Au@Pt, at pH 4.0 for 15 min incubation. H₂O₂ can be detected in the dynamic liner range of 1.0 to 100 mM with the detection limit of 1.0 mM. This study presents a novel method for controlling the properties of bimetallic NPs assembled on a silica template and increases the understanding of the activity and potential applications of highly efficient multifunctional NP-based nanozymes.

Free-Standing, Interwoven Tubular Graphene Mesh-Supported Binary AuPt Nanocatalysts: An Innovative and High-Performance Anode Methanol Oxidation Catalyst

Pt-based alloy or bimetallic anode catalysts have been developed to reduce the carbon monoxide (CO) poisoning effect and the usage of Pt in direct methanol fuel cells (DMFCs), where the second metal plays a role as CO poisoning inhibitor on Pt. Furthermore, better performance in DMFCs can be achieved by improving the catalytic dispersion and using high-performance supporting materials. In this work, we introduced a free-standing, macroscopic, interwoven tubular graphene (TG) mesh as a supporting material because of its high surface area, favorable chemical inertness, and excellent conductivity. Particularly, binary AuPt nanoparticles (NPs) can be easily immobilized on both outer and inner walls of the TG mesh with a highly dispersive distribution by a simple and efficient chemical reduction method. The TG mesh, whose outer and inner walls were decorated with optimized loading of binary AuPt NPs, exhibited a remarkably catalytic performance in DMFCs. Its methanol oxidation reaction (MOR) activity was 10.09 and 2.20 times higher than those of the TG electrodes with only outer wall immobilized with pure Pt NPs and binary AuPt NPs, respectively. Furthermore, the catalyst also displayed a great stability in methanol oxidation after 200 scanning cycles, implying the excellent tolerance toward the CO poisoning effect.

Gold-Platinum Nanoparticles with Core-Shell Configuration as Efficient Oxidase-like Nanosensors for Glutathione Detection

Nanozymes, defined as nanomaterials that can mimic the catalytic activity of natural enzymes, have been widely used to develop analytical tools for biosensing. In this regard, the monitoring of glutathione (GSH), a key antioxidant biomolecule intervening in the regulation of the oxidative stress level of cells or related with Parkinson's or mitochondrial diseases can be of great interest from the biomedical point of view. In this work, we have synthetized a gold-platinum Au@Pt nanoparticle with core-shell configuration exhibiting a remarkable oxidase-like mimicking activity towards the substrates 3,3',5,5'-tetramethylbenzidine (TMB) and o-phenylenediamine (OPD). The presence of a thiol group (-SH) in the chemical structure of GSH can bind to the Au@Pt nanozyme surface to hamper the activation of O2 and reducing its oxidase-like activity as a function of the concentration of GSH. Herein, we exploit the loss of activity to develop an analytical methodology able to detect and quantify GSH up to µM levels. The system composed by Au@Pt and TMB demonstrates a good linear range between 0.1-1.0 µM to detect GSH levels with a limit of detection (LoD) of 34 nM.

AuPt Bimetallic Nanozymes for Enhanced Glucose Catalytic Oxidase

Au metal nanoparticles as artificial nanozymes have attracted wide interest in biotechnology due to high stability and easy synthesis. Unfortunately, its catalytic activity is limited by the uniform surface electron distribution, fundamentally affecting the oxidation efficiency of glucose. Here, we synthesized AuPt bimetallic nanoparticles with unique surface electron structure due to the coupling effect of the two metal components, achieving improved glucose catalytic oxidase. Because of the effective work function difference between the two metals in AuPt, the electrons will transfer from Au to accumulate on Pt, simultaneously contributing to the substantial enhancement of Au-induced glucose oxidase and Pt-induced catalase performance. We systematically studied the enzyme-catalytic efficiency of AuPt with varied two metal proportions, in which Au:Pt at 3:1 showed the highest catalytic efficiency of glucose oxidase in solution. The AuPt nanoparticles were further co-cultured with cells and also showed excellent biological activity for glucose oxidase. This work demonstrates that the physicochemical properties between different metals can be exploited for engineering high-performance metal nanoparticle-based nanozymes, which opens up a new way to rationally design and optimize artificial nanozymes to mimic natural enzymes.

Non-covalent functionalization of triazine framework decorated over reduced graphene oxide as a novel anode catalyst support for glycerol oxidation

The electrocatalytic performance of platinum-gold(Pt-Au) nanoparticles decorated non-covalent functionalization of triazine framework derived from poly(cyanuric chloride-co-biphenyl) over reduced graphene oxide (Poly(CC-co-BP)-RGO) was carried out for glycerol in basic medium and their oxidized products were analysed to support the enhanced activity. The surface morphology and the composition of the catalyst were obtained using X-ray diffraction, transmission electron microscopy and energy-dispersive X-ray spectroscopy. The electrooxidation results illustrate that the Pt-Au/Poly(CC-co-BP)-RGO catalyst exhibits improved catalytic activity and stability when compared to that of Pt/Poly(CC-co-BP)-RGO, Pt/Poly(CC-co-BP) and Pt/RGO catalysts. The better performed Pt-Au/Poly(CC-co-BP)-RGO catalyst was used as electrode material for the fabrication of single test direct alkaline glycerol fuel cell. The fuel cell performance was tested by varying the concentration of glycerol and the temperature of the cell. The maximum power density of 122.96 mWcm^-2 was obtained for Pt-Au/Poly(CC-co-BP)-RGO catalyst in single direct alkaline glycerol fuel cell under the optimum concentration of 2.0 M glycerol at 70 °C.

A Review on Metal- and Metal Oxide-Based Nanozymes: Properties, Mechanisms, and Applications

Since the ferromagnetic (Fe3O4) nanoparticles were firstly reported to exert enzyme-like activity in 2007, extensive research progress in nanozymes has been made with deep investigation of diverse nanozymes and rapid development of related nanotechnologies. As promising alternatives for natural enzymes, nanozymes have broadened the way toward clinical medicine, food safety, environmental monitoring, and chemical production. The past decade has witnessed the rapid development of metal- and metal oxide-based nanozymes owing to their remarkable physicochemical properties in parallel with low cost, high stability, and easy storage. It is widely known that the deep study of catalytic activities and mechanism sheds significant influence on the applications of nanozymes. This review digs into the characteristics and intrinsic properties of metal- and metal oxide-based nanozymes, especially emphasizing their catalytic mechanism and recent applications in biological analysis, relieving inflammation, antibacterial, and cancer therapy. We also conclude the present challenges and provide insights into the future research of nanozymes constituted of metal and metal oxide nanomaterials.

One-pot synthesis of AuAgPd trimetallic nanoparticles with peroxidase-like activity for colorimetric assays

In this work, AuAgPd trimetallic nanoparticles (AuAgPd TNPs) with intrinsic and broad-spectrum peroxidase-like activity were synthesized through a one-pot method by co-reduction of HAuCl₄, AgNO₃, and Na₂PdCl₄ with NaBH₄. The morphology and composition of AuAgPd TNPs were characterized. The peroxidase-like activity of AuAgPd TNPs were highly dependent on the composition and nanostructure of AuAgPd TNPs. Rationally designed AuAgPd TNPs could catalyze the oxidation of various chromogenic substrates including 3,3'5,5'-tetramethylbenzidine (TMB), 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS), and o-phenylenediamine (OPD) by H₂O₂ to generate blue, green, and yellow products, respectively. Kinetic assays indicated that AuAgPd TNPs exhibited high affinity to H₂O₂. Then, sensitive colorimetric assays were developed for H₂O₂ detection by using ABTS, OPD, and TMB as chromogenic substrates, respectively. Lowest limit of detection (LOD) of 3.1 μM with wide linear range of 6-250 μM was obtained by using ABTS as substrate. Hydrogen sulfide ion (HS^-) could effectively inhibit the peroxidase-like activity of AuAgPd TNPs. Thus, a selective colorimetric assay was further fabricated for HS^- detection with LOD of 2.3 μM. This work provides an effective way for the synthesis of trimetallic nanozyme with peroxidase-like activity and also for tailoring their catalytic activity for desired use. Graphical abstract.

Porous Au@Pt nanoparticles with superior peroxidase-like activity for colorimetric detection of spike protein of SARS-CoV-2

The development of colorimetric assays for rapid and accurate diagnosis of coronavirus disease 2019 (COVID-19), caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), is of practical importance for point-of-care (POC) testing. Here we report the colorimetric detection of spike (S1) protein of SARS-CoV-2 based on excellent peroxidase-like activity of Au@Pt nanoparticles, with merits of rapidness, easy operation, and high sensitivity. The Au@Pt NPs were fabricated by a facile seed-mediated growth approach, in which spherical Au NPs were premade as seeds, followed by the Pt growth on Au seeds, producing uniform, monodispersed and porous Au@Pt core-shell NPs. The as-obtained Au@Pt NPs showed a remarkable enhancement in the peroxidase-mimic catalysis, which well abided by the typical Michaelis-Menten theory. The enhanced catalysis of Au@Pt NPs was ascribed to the porous nanostructure and formed electron-rich Pt shells, which enabled the catalytic pathway to switch from hydroxyl radical generation to electron transfer process. On a basis of these findings, a colorimetric assay of spike (S1) protein of SARS-CoV-2 was established, with a linear detection range of 10-100 ng mL^-1 of protein concentration and a low limit of detection (LOD) of 11 ng mL^-1. The work presents a novel strategy for diagnosis of COVID-19 based on metallic nanozyme-catalysis.

Au/Pt-Egg-in-Nest Nanomotor for Glucose-Powered Catalytic Motion and Enhanced Molecular Transport to Living Cells

Nanostructures converting chemical energy to mechanical work by using benign metabolic fuels, have huge implications in biomedical science. Here, we introduce Au/Pt-based Janus nanostructures, resembling to "egg-in-nest" morphology (Au/Pt-ENs), showing enhanced motion as a result of dual enzyme-relay-like catalytic cascade in physiological biomedia, and in turn showing molecular-laden transport to living cells. We developed dynamic-casting approach using silica yolk-shell nanoreactors: first, to install a large Au-seed fixing the silica-yolk aside while providing the anisotropically confined concave hollow nanospace to grow curved Pt-dendritic networks. Owing to the intimately interfaced Au and Pt catalytic sites integrated in a unique anisotropic nest-like morphology, Au/Pt-ENs exhibited high diffusion rates and displacements as the result of glucose-converted oxygen concentration gradient. High diffusiophoresis in cell culture media increased the nanomotor-membrane interaction events, in turn facilitated the cell internalization. In addition, the porous network of Au/Pt-ENs facilitated the drug-molecule cargo loading and delivery to the living cells.

Emerging Nanotechnology for Treatment of Alzheimer's and Parkinson's Disease

The prevalence of the two most common neurodegenerative diseases, Parkinson's disease (PD) and Alzheimer's Disease (AD), are expected to rise alongside the progressive aging of society. Both PD and AD are classified as proteinopathies with misfolded proteins α-synuclein, amyloid-β, and tau. Emerging evidence suggests that these misfolded aggregates are prion-like proteins that induce pathological cell-to-cell spreading, which is a major driver in pathogenesis. Additional factors that can further affect pathology spreading include oxidative stress, mitochondrial damage, inflammation, and cell death. Nanomaterials present advantages over traditional chemical or biological therapeutic approaches at targeting these specific mechanisms. They can have intrinsic properties that lead to a decrease in oxidative stress or an ability to bind and disaggregate fibrils. Additionally, nanomaterials enhance transportation across the blood-brain barrier, are easily functionalized, increase drug half-lives, protect cargo from immune detection, and provide a physical structure that can support cell growth. This review highlights emergent nanomaterials with these advantages that target oxidative stress, the fibrillization process, inflammation, and aid in regenerative medicine for both PD and AD.

AuPt Bimetal-Functionalized SnSe2 Microflower-Based Sensors for Detecting Sub-ppm NO2 at Low Temperatures

A novel chemiresistive-type sensor for detecting sub-ppm NO₂ has been fabricated using AuPt bimetal-decorated SnSe₂ microflowers, which was synthesized by the hydrothermal treatment followed by in situ chemical reduction of the bimetal precursors on the surface of the petals of the microflowers. The as-prepared sensor registers a superior performance in detection of sub-ppm concentration of NO₂. Functionalized by the AuPt bimetal, the SnSe₂ microflower-based sensor shows a response of approximately 4.62 to 8 ppm NO₂ at 130 °C. It is significantly higher than those of the sensors using the pristine SnSe₂ (∼2.29) and the modified SnSe₂ samples by a single metal, either Au (∼3.03) or Pt (∼3.97). The sensor demonstrates excellent long-term stability, signal repeatability, and selectivity to some typical interfering gaseous species including ammonia, acetone, formaldehyde, ethanol, methanol, benzene, CO₂, SO₂, and CO. The remarkable improvement of the sensitive characteristics could be induced by the electronic and chemical sensitization and the synergistic effect of the AuPt bimetal. Density functional theory (DFT) is implemented to calculate the adsorption states of NO₂ on the sensing materials and thus to possibly reveal the sensing mechanism. The significantly enhanced response of the SnSe₂-based sensor decorated with AuPt bimetallic nanoparticles has been found to be possibly caused by the orbital hybridization of O, Au, and Pt atoms leading to the redistribution of electrons, which is beneficial for NO₂ molecules to obtain more electrons from the composite material.

Ultrasmall Alloy Nanozyme for Ultrasound- and Near-Infrared Light-Promoted Tumor Ablation

The therapeutic effect of chemodynamic therapy (CDT) is significantly restricted by the stern reaction conditions and slow reaction rate of the Fenton reaction (pH 3-4). Herein, we report an ultrasmall trimetallic (Pd, Cu, and Fe) alloy nanozyme (PCF-a NEs) possessing dynamic active-site synergism, thus exhibiting a cascade glutathione peroxidase and peroxidase (POD) mimicking activities in circumneutral pH. PCF-a NEs exhibit photothermally augmented POD property and high photothermal conversion efficiency (62%) for synergistic tumor cell apoptosis. In addition, ultrasound can also enhance the mass transfer at active catalytic sites of PCF-a NEs, in turn accelerating Fenton-like reaction for tumor-specific CDT. This work provides a strategy for engineering alloy nanozymes in a bioinspired way for the amplification of intratumor reactive oxygen species in response to external stimuli, demonstrating enhanced efficiency for the inhibition of tumor growth in vitro and in vivo.

Iron-Palladium magnetic nanoparticles for decolorizing rhodamine B and scavenging reactive oxygen species

HYPOTHESIS

Here, FePd magnetic nanoparticles (MNPs) are developed as artificial enzymes with high biocompatibility and reusability.

EXPERIMENT

The nanoparticles (NPs) are synthesized in an aqueous solvent by one-pot synthesis utilizing glutathione (GSH) and cysteine (Cys) as surfactants.

FINDINGS

The prepared hydrophilic FePd NPs are redispersible in water. Further, they exhibit catalytic activity for the degradation of rhodamine B (RhB), as well as for the inhibition of reactive oxygen species (ROS) production induced by H₂O₂, which are two- and seven-fold enhancements of their catalytic performances, respectively, compared with that of horseradish peroxidase. The computational simulation and electrochemical analysis indicate that the enhancement of the catalytic effect is due to the protection of the MNP surface by GSH and Cys. In vitro experiments reveal that FePd MNPs behave like a peroxidase and decrease the ROS in mammalian cells. The cytotoxicity assessment of FePd MNPs via exposures to different cell lines for over seven days indicates that they can maintain the cell viability of >90% for up to 20 μgmL^-1 concentration. FePd MNPs with high saturation magnetization and biocompatibility can be utilized as recyclable peroxidase-mimicking nanozymes and biosensors in a variety of catalytic and biological applications.

Human serum albumin templated MnO2 nanosheets as an efficient biomimetic oxidase for biomolecule sensing

Herein, we have proposed a colorimetric biosensor for detection of acid phosphatase based on human serum albumin (HSA) templated MnO2 nanosheets (HSA-MnO2 NSs). HSA-MnO2 NSs as an efficient biomimetic oxidase could catalyze the oxidization of 3,3',5,5'-tetramethylbenzidine (TMB) to the coloured oxidation product (oxTMB). Acid phosphatase (ACP) could hydrolyze l-ascorbic acid-2-phosphate (AAP) to produce ascorbic acid, and ascorbic acid could lead to the decomposition of MnO2 NSs to Mn2+ ions, inhibiting the production of oxTMB. On the basis of this, we have demonstrated a novel colorimetric approach for the detection of acid phosphatase with the linear range from 50 μU mL-1 to 1500 μU mL-1 and a detection limit of 40 μU mL-1. The MnO2 NS-based colorimetric method has been successfully used to determine the content of acid phosphatase in real samples with satisfactory results.

Pt Nanoparticles Confined by Zirconium Metal-Organic Frameworks with Enhanced Enzyme-like Activity for Glucose Detection

Metal nanozymes hold promise for chemical and biological applications, and their implementation relies on high catalytic efficiency and stability. Using the metal-organic framework as an ideal carrier for well-dispersed ultra-small metal nanoparticles (NPs) is beneficial for improving the catalytic efficiency of nanozymes. In this study, a zirconium-based metal organic framework (UiO-66) with good chemical stability and high porosity was synthesized and used to construct Pt/UiO-66 nanocomposites. The percentage of Pt in UiO-66 can be tuned easily by adjusting the feeding amount of PtCl4 2-. Because of the confinement effect of mesopores, the Pt particles with an average diameter of 3.8 nm are formed and dispersed throughout the pores of the UiO-66 particle. The Pt/UiO-66 composites show efficient oxidase- and peroxidase-like activity. Both the oxidase- and peroxidase-like activities are dependent on the Pt percentage. Pt/UiO-66-6% exhibits enhanced peroxidase-like activity, ∼3.9 times higher than that of commercial Pt/C with 10 wt % Pt. We propose that the construction of Pt/UiO-66 increased the utilization efficiency and stability of Pt NPs and provided more active sites for catalytic reactions. Using the peroxidase-like activity of Pt/UiO-66, a colorimetric method that can be used for actual blood glucose detection was developed for the specific detection of glucose with a limit of detection of 0.033 mM.

Synthesis of gold, platinum, and gold-platinum alloy nanoparticle colloids with high-power megahertz-repetition-rate lasers: the importance of the beam guidance method

Nanoparticles of noble metals and their alloys are of particular interest for biomedicine and catalysis applications. The method of laser ablation of bulk metals in liquids gives facile access to such particles as  high-purity colloids and is already used in industrial research. However, the method still lacks sufficient productivity for industrial implementation into series production. The use of innovative laser technology may help to further disseminate this colloid synthesis method in the near future. Ultrashort-pulsed lasers with high powers and megahertz-repetition-rates became available recently, but place high demands on the accurate optical laser pulse delivery on the target. Full lateral pulse separation is necessary to avoid a reduction of nanoparticle productivity due to pulse shielding. In this study, we compare flexible but rather slow galvanometer scanning with much faster but more expensive polygon-wheel scanning in their performance in the production of colloidal nanoparticles by laser ablation in liquid. Both beam guidance technologies are applied in the laser ablation of gold, platinum, and a gold-rich platinum alloy in micromolar saline water. We found that the dimensions of the scan pattern are crucial. A threshold pattern length exists, at which one scan technology becomes more productive than the other one. In addition, a much lower productivity was found for the ablation of gold compared to that of platinum. Alloying gold with only 10 at.% of platinum improved the productivity nearly to the level of platinum, reaching 8.3 g/h.

Synthesis, Catalytic Properties and Application in Biosensorics of Nanozymes and Electronanocatalysts: A Review

The current review is devoted to nanozymes, i.e., nanostructured artificial enzymes which mimic the catalytic properties of natural enzymes. Use of the term "nanozyme" in the literature as indicating an enzyme is not always justified. For example, it is used inappropriately for nanomaterials bound with electrodes that possess catalytic activity only when applying an electric potential. If the enzyme-like activity of such a material is not proven in solution (without applying the potential), such a catalyst should be named an "electronanocatalyst", not a nanozyme. This paper presents a review of the classification of the nanozymes, their advantages vs. natural enzymes, and potential practical applications. Special attention is paid to nanozyme synthesis methods (hydrothermal and solvothermal, chemical reduction, sol-gel method, co-precipitation, polymerization/polycondensation, electrochemical deposition). The catalytic performance of nanozymes is characterized, a critical point of view on catalytic parameters of nanozymes described in scientific papers is presented and typical mistakes are analyzed. The central part of the review relates to characterization of nanozymes which mimic natural enzymes with analytical importance ("nanoperoxidase", "nanooxidases", "nanolaccase") and their use in the construction of electro-chemical (bio)sensors ("nanosensors").

Electrodeposition-Assisted Rapid Preparation of Pt Nanocluster/3D Graphene Hybrid Nanozymes with Outstanding Multiple Oxidase-Like Activity for Distinguishing Colorimetric Determination of Dihydroxybenzene Isomers

Here, we demonstrate a facile bottom-up strategy to fabricate Pt nanoclusters (Pt NCs) grafted onto three-dimensional graphene foam (3D GF) assisted by cetyltrimethyl ammonium bromide (CTAB) using the electrodeposition method. The homogeneous grafting of Pt NC onto 3D GF is due to the formation of hemimicelles above some CTAB concentration. With the unique nanocluster structure and the high content of Pt⁰, the Pt NC/3D GF nanohybrid exhibits extremely high activity and shows higher reusability and stability. Apart from the intrinsic oxidase-like activity with 3,3',5,5'-tetramethylbenzidine (TMB) as the substrate, the Pt NC/3D GF nanohybrid can act simultaneously as an effective polyphenol oxidase (PPO) mimic, such as tyrosinase, catechol oxidase, and laccase. More importantly, utilizing intrinsic catechol oxidase-like activity and the oxidase-like activity with TMB as the substrate of the nanohybrid, distinguishing colorimetric determination of dihydroxybenzene isomers (catechol and hydroquinone) is performed. Distinguishing colorimetric analysis of dihydroxybenzene isomers was first developed using nanozymes. The present work provides a simple bottom-up approach for the reasonable fabrication of various nanostructured nanozymes with excellent performance using the electrodeposition method assisted with surfactants.

Regulating the pro- and anti-oxidant capabilities of bimetallic nanozymes for the detection of Fe2+ and protection of Monascus pigments

The emerging properties of mimicking enzymes open up new horizons for nanomaterials. Regulating their enzyme-like activity and exploiting their applications are currently the hot topics for nanozymes. Among their activities, the pro-oxidant and antioxidant capabilities of nanozymes are important to determine their unique physiological functions. In this paper, we demonstrate that PtRu NPs exhibit multiple enzyme-like activities (e.g. peroxidase, oxidase, ferroxidase, catalase and SOD) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity. The PtRu bimetallic nanozymes therefore show pro-oxidant and anti-oxidant functions. It was found that the enzyme-like activities of PtRu NPs are highly dependent on the Pt/Ru molar ratio and show a similar trend in the order of activity: Pt₉₀Ru₁₀ > Pt₇₅Ru₂₅ > Pt > Pt₄₀Ru₆₀, indicating that proper alloying of Pt with Ru can enhance both pro- and anti-oxidant capabilities. By employing the ferroxidase-like activity and catalase-like activity, we verified the applications of PtRu nanozymes in the detection of Fe²⁺ ions, and tried for the first time to protect Monascus pigments (MPs) from hydrogen peroxide oxidation. These results not only provide an effective way to optimize the pro- and anti-oxidant capabilities of nanozymes, but also provide prospects for the applications of nanozymes in protecting biologically active natural products.

Nanomagnet-Silica Nanoparticles Decorated with Au@Pd for Enhanced Peroxidase-Like Activity and Colorimetric Glucose Sensing

Nanomagnet-silica shell (Fe₃O₄@SiO₂) decorated with Au@Pd nanoparticles (NPs) were synthesized successfully. The characterization of Fe₃O₄@SiO₂-NH₂-Au@PdNPs was achieved using several spectroscopic and microscopic techniques. The quantitative surface analysis was confirmed using X-ray photoelectron spectroscopy. The Fe₃O₄@SiO₂-NH₂-Au@Pd_0.30NPs exhibited excellent peroxidase-like activity by effectively catalyzing the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H₂O₂. The absorption peaks at 370 and 652 nm confirmed the peroxidase-like activity of the Fe₃O₄@SiO₂-NH₂-Au@Pd_0.30NPs. The Michaelis-Menten constant (K_m) of 0.350 and 0.090 mM showed strong affinity toward H₂O₂ and TMB at Fe₃O₄@SiO₂-NH₂-Au@Pd_0.30NPs. The mechanism of the peroxidase-like activity was found to proceed via an electron transfer process. A simple colorimetric sensor based on glucose oxidase and Fe₃O₄@SiO₂-NH₂-Au@Pd_0.30NPs showed excellent selectivity and sensitivity towards the detection of glucose. The fabricated glucose biosensor exhibited a wide linear response toward glucose from 0.010 to 60.0 μM with an limit of detection of 60.0 nM and limit of quantification of 200 nM. The colorimetric biosensor based on Fe₃O₄@SiO₂-NH₂-Au@Pd_0.30NPs as a peroxidase mimic was also successfully applied for the determination of glucose concentrations in serum samples. The synthesized Fe₃O₄@SiO₂-NH₂-Au@Pd_0.30NPs nanozymes exhibited excellent potential as an alternative to horseradish peroxidase for low-cost glucose monitoring.

Colorimetric sensing of chlorpyrifos through negative feedback inhibition of the catalytic activity of silver phosphate oxygenase nanozymes

Intensive use of organophosphate chlorpyrifos pesticides in farming has become a serious issue due to their harmful effects on living beings. Most fruits, vegetables and soil contain chlorpyrifos, and it cannot be rinsed out completely by water washing. Therefore, a selective and sensitive detection of chlorpyrifos is significant. In the present study, the intriguing oxidase-mimicking activity of Ag₃PO₄ nanoparticles (NPs) is explored for the fast and selective detection of chlorpyrifos pesticides. Ag₃PO₄ NPs exhibit several advantages, such as great catalytic efficiency, high stability, monodispersity and reusability, over other expensive nanozymes via a facile one-step sensing. The size, shape, crystal planes and diffraction patterns of the Ag₃PO₄ NPs were observed via FESEM and HR-TEM. The surface properties and oxidation states were analyzed via XPS technique. Ag₃PO₄ NPs possess intrinsic excellent oxidase-mimicking properties against 3,3′,5,5′-tetramethylbezidyne (TMB). When chlorpyrifos and Ag₃PO₄ NP nanozymes come in proper orientation proximity, chlorpyrifos is oxidized. The oxidized chlorpyrifos produces sulfide ions and chlorpyrifos oxon. The produced sulfide ions in the reaction system interact with Ag₃PO₄ NPs and inhibit their catalytic activity by feedback inhibition. Indeed, neither any catalytic site is left to oxidize TMB nor any blue colour appears. Thus, this feedback inhibition phenomenon senses chlorpyrifos pesticides. The calculated limit of detection (LOD) for the standard chlorpyrifos is ∼9.97 ppm, and the efficacy of the Ag₃PO₄ NPs calculated in terms of the K_m value was found to be 0.15 mM. A real sample analysis was carried out by the standard addition method with two soil samples collected from Pethapur and Chiloda villages.

Ag₃PO₄ oxygenase nanozymatic activity towards chlorpyrifos sensing.

One-to-Many Single Entity Electrochemistry Biosensing for Ultrasensitive Detection of microRNA

Single-entity electrochemistry (SEEC), a promising method for biosensing, has an intrinsic limitation on sensitivity since at most one colliding entity can be successfully triggered by one target. Here, we take advantage of one-to-many (1:n) signal amplification to develop a new single-entity electrochemistry biosensing (SEECBS), integrating satellite magnetic nanoparticle (MN)-DNA-Pt nanoparticle (NP) conjugates, duplex-specific nuclease (DSN) assisted Pt NPs releasing with stabilization, and effective collision of small sized and nearly naked Pt NPs. Compared with conventional SEECBS, the 1:n SEECBS can successfully enrich ∼2 nM Pt NPs by adding 50 aM microRNA (miRNA), in other words, ∼4 × 10⁷ Pt NPs can be triggered by one target. The proposed SEECBS allows the detection of 47 aM miRNA-21, nearly 6 orders of magnitude lower than the previous work, and discrimination of nontarget miRNAs containing even single-nucleotide mismatch. Besides, this method has also been successfully demonstrated for quantification of miRNA in different cell lines. Therefore, the proposed method holds great potential for the application of SEECBS in early diagnosis and prognosis monitoring of cancer.

Recent Advances in Nanozyme Research

As a new generation of artificial enzymes, nanozymes have the advantages of high catalytic activity, good stability, low cost, and other unique properties of nanomaterials. Due to their wide range of potential applications, they have become an emerging field bridging nanotechnology and biology, attracting researchers in various fields to design and synthesize highly catalytically active nanozymes. However, the thorough understanding of experimental phenomena and the mechanisms beneath practical applications of nanozymes limits their rapid development. Herein, the progress of experimental and computational research of nanozymes on two issues over the past decade is briefly reviewed: (1) experimental development of new nanozymes mimicking different types of enzymes. This covers their structures and applications ranging from biosensing and bioimaging to therapeutics and environmental protection. (2) The catalytic mechanism proposed by experimental and theoretical study. The challenges and future directions of computational research in this field are also discussed.

Comparative biological effects of spherical noble metal nanoparticles (Rh, Pd, Ag, Pt, Au) with 4-8 nm diameter

For a comparative cytotoxicity study, nanoparticles of the noble metals Rh, Pd, Ag, Pt, and Au (spherical, average diameter 4 to 8 nm) were prepared by reduction in water and colloidally stabilized with poly(N-vinyl pyrrolidone) (PVP). Thus, their shape, size, and surface functionalization were all the same. Size and morphology of the nanoparticles were determined by dynamic light scattering (DLS), analytical disc centrifugation (differential centrifugal sedimentation, DCS), and high-resolution transmission electron microscopy (HRTEM). Cell-biological experiments were performed to determine the effect of particle exposure on the viability of human mesenchymal stem cells (hMSCs). Except for silver, no adverse effect of any of the metal nanoparticles was observed for concentrations up to 50 ppm (50 mg L-1) incubated for 24 h, indicating that noble metal nanoparticles (rhodium, palladium, platinum, gold) that do not release ions are not cytotoxic under these conditions.

Innovative Biocatalysts as Tools to Detect and Inactivate Nerve Agents

Pesticides and warfare nerve agents are frequently organophosphates (OPs) or related compounds. Their acute toxicity highlighted more than ever the need to explore applicable strategies for the sensing, decontamination and/or detoxification of these compounds. Herein, we report the use of two different thermostable enzyme families capable to detect and inactivate OPs. In particular, mutants of carboxylesterase-2 from Alicyclobacillus acidocaldarius and of phosphotriesterase-like lactonases from Sulfolobus solfataricus and Sulfolobus acidocaldarius, have been selected and assembled in an optimized format for the development of an electrochemical biosensor and a decontamination formulation, respectively. The features of the developed tools have been tested in an ad-hoc fabricated chamber, to mimic an alarming situation of exposure to a nerve agent. Choosing ethyl-paraoxon as nerve agent simulant, a limit of detection (LOD) of 0.4 nM, after 5 s of exposure time was obtained. Furthermore, an optimized enzymatic formulation was used for a fast and efficient environmental detoxification (>99%) of the nebulized nerve agent simulants in the air and on surfaces. Crucial, large-scale experiments have been possible thanks to production of grams amounts of pure (>90%) enzymes.