Plasmonic magnesium nanoparticles decorated with palladium catalyze thermal and light-driven hydrogenation of acetylene

Bimetallic Pd-Mg nanoparticles were synthesized by partial galvanic replacement of plasmonic Mg nanoparticles, and their catalytic and photocatalytic properties in selective hydrogenation of acetylene have been investigated. Electron probe studies confirm that the Mg-Pd structures mainly consist of metallic Mg and sustain several localized plasmon resonances across a broad wavelength range. We demonstrate that, even without light excitation, the Pd-Mg nanostructures exhibit an excellent catalytic activity with selectivity to ethylene of 55% at 100% acetylene conversion achieved at 60 °C. With laser excitation at room temperature over a range of intensities and wavelengths, the initial reaction rate increased up to 40 times with respect to dark conditions and a 2-fold decrease of the apparent activation energy was observed. A significant wavelength-dependent change in hydrogenation kinetics strongly supports a catalytic behavior affected by plasmon excitation. This report of coupling between Mg's plasmonic and Pd's catalytic properties paves the way for sustainable catalytic structures for challenging, industrially relevant selective hydrogenation processes.

Nickel-Based High-Entropy Intermetallic as a Highly Active and Selective Catalyst for Acetylene Semihydrogenation

Acetylene semihydrogenation is a key technology for producing polymer-grade ethylene from crude ethylene. Ni-based catalysts are promising alternatives to noble-metals for this process. However, achieving high catalytic activity and selectivity remains a big challenge. We report a novel catalyst design based on high-entropy intermetallics (HEI), which provide thermally stable isolated Ni without excess counterpart metals and achieve exceptionally high performance. Intermetallic NiGa was multi-metalized to a (NiFeCu)(GaGe), where the Ni and Ga sites were partially substituted with Fe/Cu and Ge, respectively, without altering the parent CsCl-type structure. The NiFeCuGaGe/SiO₂ HEI catalyst completely inhibited ethylene overhydrogenation even at complete acetylene conversion, and exhibited five-times higher activity than other 3d-transition-metal-based catalysts. The DFT study showed that the surface energy decreased by multi-metallization, which drastically weakened ethylene adsorption.

Compensation Effect Exhibited by Gold Bimetallic Nanoparticles during CO Oxidation

While CO oxidation catalyzed by gold nanoparticles has been practiced academically for several decades, there are still important discoveries to be made. One area of current interest is to pair Au with another alloying metal and observe the catalytic consequences of the presence of the other metal. In this work, TiO₂-supported bimetallic Au nanoparticles are alloyed with Cu, Co, Ni, Pd, and Ru and used as catalysts for CO oxidation. Two synthetic methods for the alloys are presented: a strong electrostatic adsorption (SEA) method and a sterically demanding ligand synthesis (SDLS) method which uses triphenylphosphine (TPP) as the ligand. The catalytic performance of the materials synthesized with the SEA and SDLS methods is compared in CO oxidation. The results indicate that the materials tested present an enthalpy-entropy compensation effect. Interestingly, both the enthalpy of activation, ΔH ^‡, and the entropy of activation, ΔS ^‡, generally decrease with particle size. AuCo and AuRu materials exhibit a decrease in the overall activity as compared to Au and the other Au alloys when synthesized via SEA. Au face-centered-cubic alloys AuCu, AuNi, and AuPd prepared via SEA show an improvement in activity compared to monometallic Au in our reaction conditions. In situ diffuse reflectance infrared Fourier transform spectroscopy presents two distinct regions for Au bimetallics where AuCo and AuRu show peak positions in the region of 2070-2050 cm^-1, indicating a weaker interaction for AuCo and AuRu with CO when compared to that of the other alloys. For the SDLS method samples, the hypothesis is that TPP would enhance the CO oxidation rate by enhancing the charge transfer to the metallic surface. The results indicate that SDLS samples have lower CO oxidation rates and if any charge transfer occurs, it is masked by the lateral interactions of the CO π bonds and the phenyl groups of TPP.

Facile fabrication of bimetallic Cu–Ag binary hybrid nanoparticles and their application in catalysis

Herein, high efficiency and recyclable Cu–Ag hybrid catalyst (Trp–Cu–Ag) NPs were prepared by the hydrothermal method using l-tryptophan as a reducing agent and protecting reagent.

Synthesis of ultrasmall, homogeneously alloyed, bimetallic nanoparticles on silica supports

Supported nanoparticles containing more than one metal have a variety of applications in sensing, catalysis, and biomedicine. Common synthesis techniques for this type of material often result in large, unalloyed nanoparticles that lack the interactions between the two metals that give the particles their desired characteristics. We demonstrate a relatively simple, effective, generalizable method to produce highly dispersed, well-alloyed bimetallic nanoparticles. Ten permutations of noble and base metals (platinum, palladium, copper, nickel, and cobalt) were synthesized with average particle sizes from 0.9 to 1.4 nanometers, with tight size distributions. High-resolution imaging and x-ray analysis confirmed the homogeneity of alloying in these ultrasmall nanoparticles.

Kinetic Parameters for the Selective Hydrogenation of Acetylene on GaPd2 and GaPd

Intermetallic GaPd₂ is a highly selective and stable catalyst for the semi-hydrogenation of acetylene. Knowledge of the underlying reaction kinetics is essential to gain a deeper understanding of the selective hydrogenation on this catalytic material. To date, there has been no experimental kinetic data published for this reaction on a well-defined intermetallic catalyst possessing isolated active sites. Kinetic measurements are performed at 140-200 °C, revealing an apparent activation energy of 29(2) kJ mol^-1 . GaPd₂ is shown to be the first binary catalyst material, which shows a positive reaction order (0.89) with respect to acetylene at 200 °C. The influences on the extent of acetylene conversion, specific activity and selectivity to ethylene, ethane, and higher hydrocarbons are determined by a 2⁴ factorial experiment following a design of experiments approach. Temperature and pressure have the strongest impact on these values. The results allow optimal operation for achieving high ethylene yields. A comparison of the reaction kinetics on GaPd₂ with experimental results obtained for GaPd reveals different orders of reaction of H₂ and C₂ H₂ on the two compounds.

Decorating of Ag and CuO on Cu Nanoparticles for Enhanced High Catalytic Activity to the Degradation of Organic Pollutants

Metal/semiconductor composites are promising catalysts with superior catalytic activity. In this work, a Cu/CuO-Ag composite with structure that consisted of Ag and CuO nanoparticles (NPs) decorated on the surface of Cu were fabricated via a facile in situ method. With characterization by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDX), and inductively coupled plasma atomic emission spectrometry (ICP-AES), the structure and components of the Cu/CuO-Ag composite were well-defined. The Cu/CuO-Ag composite exhibited superior catalytic activities for the reduction of 4-nitrophenol (4-NP) in the presence of NaBH₄ with just a trace amount of Ag NPs (1.28 wt %). The reduction reaction is completed in 75 s with an apparent rate constant k_app of 4.60 × 10^-2 s^-1. The Cu/CuO-Ag composite also showed excellent durable catalytic stability, as no significant activity loss was detected in the consecutive five reaction runs. With the aid of the Sabatier principle and volcano plot, the opportune chemical adsorption energy of the reagent 4-NP on the Cu/CuO-Ag composite was inferred to be the key to its high reaction rate. The CuO NPs as a semiconductor with narrow band gap also could help the Cu/CuO-Ag composite to capture the electrons/hydride ions and increase opportunities for 4-NP to be reduced. Furthermore, the Cu/CuO-Ag composite exhibited outstanding activity on the oxidative degradation of methylene blue (MB). This work enriched the bimetal/semiconductor catalyst system and supplied new insight into the catalysis mechanism.