Single channel seeks permeant ion for brief but intimate relationship

Polymodal Control of TMEM16x Channels and Scramblases

The TMEM16A/anoctamin-1 calcium-activated chloride channel (CaCC) contributes to a range of vital functions, such as the control of vascular tone and epithelial ion transport. The channel is a founding member of a family of 10 proteins (TMEM16x) with varied functions; some members (i.e., TMEM16A and TMEM16B) serve as CaCCs, while others are lipid scramblases, combine channel and scramblase function, or perform additional cellular roles. TMEM16x proteins are typically activated by agonist-induced Ca2+ release evoked by Gq-protein-coupled receptor (GqPCR) activation; thus, TMEM16x proteins link Ca2+-signalling with cell electrical activity and/or lipid transport. Recent studies demonstrate that a range of other cellular factors—including plasmalemmal lipids, pH, hypoxia, ATP and auxiliary proteins—also control the activity of the TMEM16A channel and its paralogues, suggesting that the TMEM16x proteins are effectively polymodal sensors of cellular homeostasis. Here, we review the molecular pathophysiology, structural biology, and mechanisms of regulation of TMEM16x proteins by multiple cellular factors.

Cation-Specific Conformations in a Dual-Function Ion-Pumping Microbial Rhodopsin

A recently discovered rhodopsin ion pump (DeNaR, also known as KR2) in the marine bacterium Dokdonia eikasta uses light to pump protons or sodium ions from the cell depending on the ionic composition of the medium. In cells suspended in a KCl solution, DeNaR functions as a light-driven proton pump, whereas in a NaCl solution, DeNaR conducts light-driven sodium ion pumping, a novel activity within the rhodopsin family. These two distinct functions raise the questions of whether the conformations of the protein differ in the presence of K(+) or Na(+) and whether the helical movements that result in the canonical E → C conformational change in other microbial rhodopsins are conserved in DeNaR. Visible absorption maxima of DeNaR in its unphotolyzed (dark) state show an 8 nm difference between Na(+) and K(+) in decyl maltopyranoside micelles, indicating an influence of the cations on the retinylidene photoactive site. In addition, electronic paramagnetic resonance (EPR) spectra of the dark states reveal repositioning of helices F and G when K(+) is replaced with Na(+). Furthermore, the conformational changes assessed by EPR spin-spin dipolar coupling show that the light-induced transmembrane helix movements are very similar to those found in bacteriorhodopsin but are altered by the presence of Na(+), resulting in a new feature, the clockwise rotation of helix F. The results establish the first observation of a cation switch controlling the conformations of a microbial rhodopsin and indicate specific interactions of Na(+) with the half-channels of DeNaR to open an appropriate path for ion translocation.

Interactions between permeation and gating in the TMEM16B/anoctamin2 calcium-activated chloride channel

Extracellular anions more permeant than Cl⁻ modulate TMEM16B gating to promote channel opening, whereas less permeant anions favor channel closure.

At least two members of the TMEM16/anoctamin family, TMEM16A (also known as anoctamin1) and TMEM16B (also known as anoctamin2), encode Ca²⁺-activated Cl⁻ channels (CaCCs), which are found in various cell types and mediate numerous physiological functions. Here, we used whole-cell and excised inside-out patch-clamp to investigate the relationship between anion permeation and gating, two processes typically viewed as independent, in TMEM16B expressed in HEK 293T cells. The permeability ratio sequence determined by substituting Cl⁻ with other anions (P_X/P_Cl) was SCN⁻ > I⁻ > NO₃⁻ > Br⁻ > Cl⁻ > F⁻ > gluconate. When external Cl⁻ was substituted with other anions, TMEM16B activation and deactivation kinetics at 0.5 µM Ca²⁺ were modified according to the sequence of permeability ratios, with anions more permeant than Cl⁻ slowing both activation and deactivation and anions less permeant than Cl⁻ accelerating them. Moreover, replacement of external Cl⁻ with gluconate, or sucrose, shifted the voltage dependence of steady-state activation (G-V relation) to more positive potentials, whereas substitution of extracellular or intracellular Cl⁻ with SCN⁻ shifted G-V to more negative potentials. Dose–response relationships for Ca²⁺ in the presence of different extracellular anions indicated that the apparent affinity for Ca²⁺ at +100 mV increased with increasing permeability ratio. The apparent affinity for Ca²⁺ in the presence of intracellular SCN⁻ also increased compared with that in Cl⁻. Our results provide the first evidence that TMEM16B gating is modulated by permeant anions and provide the basis for future studies aimed at identifying the molecular determinants of TMEM16B ion selectivity and gating.

Contribution of ion binding affinity to ion selectivity and permeation in KcsA, a model potassium channel

Ion permeation and selectivity, key features in ion channel function, are believed to arise from a complex ensemble of energetic and kinetic variables. Here we evaluate the contribution of pore cation binding to ion permeation and selectivity features of KcsA, a model potassium channel. For this, we used E71A and M96V KcsA mutants in which the equilibrium between conductive and nonconductive conformations of the channel is differently shifted. E71A KcsA is a noninactivating channel mutant. Binding of K(+) to this mutant reveals a single set of low-affinity K(+) binding sites, similar to that seen in the binding of K(+) to wild-type KcsA that produces a conductive, low-affinity complex. This seems consistent with the observed K(+) permeation in E71A. Nonetheless, the E71A mutant retains K(+) selectivity, which cannot be explained on the basis of just its low affinity for this ion. At variance, M96V KcsA is a rapidly inactivating mutant that has lost selectivity for K(+) and also conducts Na(+). Here, low-affinity binding and high-affinity binding of both cations are detected, seemingly in agreement with both being permeating species in this mutant channel. In conclusion, binding of the ion to the channel protein seemingly explains certain gating, ion selectivity, and permeation properties. Ion binding stabilizes greatly the channel and, depending upon ion type and concentration, leads to different conformations and ion binding affinities. High-affinity states guarantee binding of specific ions and mediate ion selectivity but are nonconductive. Conversely, low-affinity states would not discriminate well among different ions but allow permeation to occur.

Ion binding to KcsA: implications in ion selectivity and channel gating

Binding of K+ and Na+ to the potassium channel KcsA has been characterized from the stabilization observed in the heat-induced denaturation of the protein as the ion concentration is increased. KcsA thermal denaturation is known to include (i) dissociation of the homotetrameric channel into its constituent subunits and (ii) protein unfolding. The ion concentration-dependent changes in the thermal stability of the protein, evaluated as the Tm value for thermal-induced denaturation of the protein, may suggest the existence of both high- and low-affinity K+ binding sites of KcsA, which lend support to the tenet that channel gating may be governed by K+ concentration-dependent transitions between different affinity states of the channel selectivity filter. We also found that Na+ binds to KcsA with a KD similar to that estimated electrophysiologically from channel blockade. Therefore, our findings on ion binding to KcsA partly account for K+ over Na+ selectivity and Na+ blockade and argue against the strict “snug fit” hypothesis used initially to explain ion selectivity from the X-ray channel structure. Furthermore, the remarkable effects of increasing the ion concentration, K+ in particular, on the Tm of the denaturation process evidence that synergistic effects of the metal-mediated intersubunit interactions at the channel selectivity filter are a major contributor to the stability of the tetrameric protein. This observation substantiates the notion of a role for ions as structural “effectors” of ion channels.

Ion-dependent gating of kainate receptors

Ligand-gated ion channels are an important class of signalling protein that depend on small chemical neurotransmitters such as acetylcholine, l-glutamate, glycine and gamma-aminobutyrate for activation. Although numerous in number, neurotransmitter substances have always been thought to drive the receptor complex into the open state in much the same way and not rely substantially on other factors. However, recent work on kainate-type (KAR) ionotropic glutamate receptors (iGluRs) has identified an exception to this rule. Here, the activation process fails to occur unless external monovalent anions and cations are present. This absolute requirement of ions singles out KARs from all other ligand-gated ion channels, including closely related AMPA- and NMDA-type iGluR family members. The uniqueness of ion-dependent gating has earmarked this feature of KARs as a putative target for the development of selective ligands; a prospect all the more compelling with the recent elucidation of distinct anion and cation binding pockets. Despite these advances, much remains to be resolved. For example, it is still not clear how ion effects on KARs impacts glutamatergic transmission. I conclude by speculating that further analysis of ion-dependent gating may provide clues into how functionally diverse iGluRs families emerged by evolution. Consequently, ion-dependent gating of KARs looks set to continue to be a subject of topical inquiry well into the future.

Effects of conducting and blocking ions on the structure and stability of the potassium channel KcsA

This article reports on the interaction of conducting (K(+)) and blocking (Na(+)) monovalent metal ions with detergent-solubilized and lipid-reconstituted forms of the K(+) channel KcsA. Monitoring of the protein intrinsic fluorescence reveals that the two ions bind competitively to KcsA with distinct affinities (dissociation constants for the KcsA.K(+) and KcsA.Na(+) complexes of approximately 8 and 190 mm, respectively) and induce different conformations of the ion-bound protein. The differences in binding affinity as well as the higher K(+) concentration bathing the intracellular mouth of the channel, through which the cations gain access to the protein binding sites, should favor that only KcsA.K(+) complexes are formed under physiological-like conditions. Nevertheless, despite such prediction, it was also found that concentrations of Na(+) well below its dissociation constant and even in the presence of higher K(+) concentrations, cause a remarkable decrease in the protein thermal stability and facilitate thermal dissociation into subunits of the tetrameric KcsA, as concluded from the temperature dependence of the protein infrared spectra and from gel electrophoresis, respectively. These latter observations cannot be explained based on the occupancy of the binding sites from above and suggest that there must be additional ion binding sites, whose occupancy could not be detected by fluorescence and in which the affinity for Na(+) must be higher or at least similar to that of K(+). Moreover, cation binding as reported by means of fluorescence does not suffice to explain the large differences in free energy of stabilization involved in the formation of the KcsA.Na(+) and KcsA.K(+) complexes, which for the most part should arise from synergistic effects of the ion-mediated intersubunit interactions.

External ions are coactivators of kainate receptors

The activation of ligand-gated ion channels is thought to depend solely on the binding of chemical neurotransmitters. In this study, we demonstrate that kainate (KA) ionotropic glutamate receptors (iGluRs) require not only the neurotransmitter L-glutamate (L-Glu) but also external sodium and chloride ions for activation. Removal of external ions traps KA receptors (KARs) in a novel inactive state that binds L-Glu with picomolar affinity. Moreover, occupancy of KARs by L-Glu precludes external ion binding, demonstrating crosstalk between ligand- and ion-binding sites. AMPA iGluRs function normally in the absence of external ions, revealing that even closely related iGluR subfamilies operate by distinct gating mechanisms. This behavior is interchangeable via a single amino acid residue that operates as a molecular switch to confer AMPA receptor behavior onto KARs. Our findings identify a novel allosteric site that singles out KARs from all other ligand-gated ion channels.

Outer pore residues control the H(+) and K(+) sensitivity of the Arabidopsis potassium channel AKT3

The Arabidopsis phloem channel AKT3 is the founder of a subfamily of shaker-like plant potassium channels characterized by weak rectification, Ca(2+) block, proton inhibition, and, as shown in this study, K(+) sensitivity. In contrast to inward-rectifying, acid-activated K(+) channels of the KAT1 family, extracellular acidification decreases AKT3 currents at the macroscopic and single-channel levels. Here, we show that two distinct sites within the outer mouth of the K(+)-conducting pore provide the molecular basis for the pH sensitivity of this phloem channel. After generation of mutant channels and functional expression in Xenopus oocytes, we identified the His residue His-228, which is proximal to the K(+) selectivity filter (GYGD) and the distal Ser residue Ser-271, to be involved in proton susceptibility. Mutations of these sites, H228D and S271E, drastically reduced the H(+) and K(+) sensitivity of AKT3. Although in K(+)-free bath solutions outward K(+) currents were abolished completely in wild-type AKT3, S271E as well as the AKT3-HDSE double mutant still mediated K(+) efflux. We conclude that the pH- and K(+)-dependent properties of the AKT3 channel involve residues in the outer mouth of the pore. Both properties, H(+) and K(+) sensitivity, allow the fine-tuning of the phloem channel and thus seem to represent important elements in the control of membrane potential and sugar loading.

Molecular determinants of the inhibition of human Kv1.5 potassium currents by external protons and Zn(2+)

Using human Kv1.5 channels expressed in HEK293 cells we assessed the ability of H+o to mimic the previously reported action of Zn(2+) to inhibit macroscopic hKv1.5 currents, and using site-directed mutagenesis, we addressed the mechanistic basis for the inhibitory effects of H(+)(o) and Zn(2+). As with Zn(2+), H(+)(o) caused a concentration-dependent, K(+)(o)-sensitive and reversible reduction of the maximum conductance (g(max)). With zero, 5 and 140 mM K(+)(o) the pK(H) for this decrease of g(max) was 6.8, 6.2 and 6.0, respectively. The concentration dependence of the block relief caused by increasing [K(+)](o) was well fitted by a non-competitive interaction between H(+)(o) and K(+)(o), for which the K(D) for the K(+) binding site was 0.5-1.0 mM. Additionally, gating current analysis in the non-conducting mutant hKv1.5 W472F showed that changing from pH 7.4 to pH 5.4 did not affect Q(max) and that charge immobilization, presumed to be due to C-type inactivation, was preserved at pH 5.4. Inhibition of hKv1.5 currents by H+o or Zn(2+) was substantially reduced by a mutation either in the channel turret (H463Q) or near the pore mouth (R487V). In light of the requirement for R487, the homologue of Shaker T449, as well as the block-relieving action of K(+)(o), we propose that H(+) or Zn(2+) binding to histidine residues in the pore turret stabilizes a channel conformation that is most likely an inactivated state.

External anions and cations distinguish between AMPA and kainate receptor gating mechanisms

Experiments were designed to examine if ion-flow through alpha-amino-3-hydroxy-5-methyl-isoxazolepropionic acid (AMPA) or kainate receptors interferes with protein structures associated with the gating machinery. Gating was studied using ultra-fast drug perfusion of outside-out patches containing rat GluR-A or GluR6 subunits excised from transfected human embryonic kidney cells. Deactivation rates of GluR6 kainate receptors observed following brief L-glutamate (10 mM Glu, 1 ms) applications differed by two to threefold in high (405 mM symmetrical Na(+), tau(decay) = 2.7 ms at -100 mV) and low ionic strength (55 mM, tau(decay) = 1.1 ms) solutions. In comparison, GluR-A AMPA receptors were much less sensitive. Ion effects on GluR6 receptors did not reflect surface potential screening or ion-agonist competition at the agonist-binding site since deactivation rates were slower in high ionic strength solutions. Moreover, the apparent agonist affinity did not decrease with increasing ionic strength (e.g. 55 mM, EC(50) = 110 microM vs. 405 mM, EC(50) = 61 microM). GluR6 responses were strongly dependent on ions present on the external, but not the internal, side of the plasma membrane. Decay kinetics was regulated by the type of ion present suggesting that the chemical nature of the solution, not its ionic strength, governed channel behaviour. Both external anions and cations modulated the amplitude and decay kinetics of GluR6 responses in a concomitant manner. AMPA receptor responses recorded in identical ionic conditions did not exhibit this behaviour. These results identify a novel mechanism that distinguishes AMPA and kainate receptors. External ions regulate the gating machinery of kainate receptors through an allosteric mechanism that involves both anions and cations.

Gating charge immobilization caused by the transition between inactivated states in the Kv1.5 channel

Sustained Na(+) or Li(+) conductance is a feature of the inactivated state in wild-type (WT) and nonconducting Shaker and Kv1.5 channels, and has been used here to investigate the cause of off-gating charge immobilization in WT and Kv1.5-W472F nonconducting mutant channels. Off-gating immobilization in response to brief pulses in cells perfused with NMG/NMG is the result of a more negative voltage dependence of charge recovery (V(1/2) is -96 mV) compared with on-gating charge movement (V(1/2) is -6.3 mV). This shift is known to be associated with slow inactivation in Shaker channels and the disparity is reduced by 40 mV, or approximately 50% in the presence of 135 mM Cs. Off-gating charge immobilization is voltage-dependent with a V(1/2) of -12 mV, and correlates well with the development of Na(+) conductance on repolarization through C-type inactivated channels (V(1/2) is -11 mV). As well, the time-dependent development of the inward Na(+) tail current and gating charge immobilization after depolarizing pulses of different durations has the same time constant (tau = 2.7 ms). These results indicate that in Kv1.5 channels the transition to a stable C-type inactivated state takes only 2-3 ms and results in strong charge immobilization in the absence of Group IA metal cations, or even in the presence of Na. Inclusion of low concentrations of Cs delays the appearance of Na(+) tail currents in WT channels, prevents transition to inactivated states in Kv1.5-W472F nonconducting mutant channels, and removes charge immobilization. Higher concentrations of Cs are able to modulate the deactivating transition in Kv1.5 channels and prevent the residual slowing of charge return.

Collapse of conductance is prevented by a glutamate residue conserved in voltage-dependent K(+) channels

Voltage-dependent K(+) channel gating is influenced by the permeating ions. Extracellular K(+) determines the occupation of sites in the channels where the cation interferes with the motion of the gates. When external [K(+)] decreases, some K(+) channels open too briefly to allow the conduction of measurable current. Given that extracellular K(+) is normally low, we have studied if negatively charged amino acids in the extracellular loops of Shaker K(+) channels contribute to increase the local [K(+)]. Surprisingly, neutralization of the charge of most acidic residues has minor effects on gating. However, a glutamate residue (E418) located at the external end of the membrane spanning segment S5 is absolutely required for keeping channels active at the normal external [K(+)]. E418 is conserved in all families of voltage-dependent K(+) channels. Although the channel mutant E418Q has kinetic properties resembling those produced by removal of K(+) from the pore, it seems that E418 is not simply concentrating cations near the channel mouth, but has a direct and critical role in gating. Our data suggest that E418 contributes to stabilize the S4 voltage sensor in the depolarized position, thus permitting maintenance of the channel open conformation.

Molecular dynamics of the sodium channel pore vary with gating: interactions between P-segment motions and inactivation

Disulfide trapping studies have revealed that the pore-lining (P) segments of voltage-dependent sodium channels undergo sizable motions on a subsecond time scale. Such motions of the pore may be necessary for selective ion translocation. Although traditionally viewed as separable properties, gating and permeation are now known to interact extensively in various classes of channels. We have investigated the interaction of pore motions and voltage-dependent gating in micro1 sodium channels engineered to contain two cysteines within the P segments. Rates of catalyzed internal disulfide formation (kSS) were measured in K1237C+W1531C mutant channels expressed in oocytes. During repetitive voltage-clamp depolarizations, increasing the pulse duration had biphasic effects on the kSS, which first increased to a maximum at 200 msec and then decreased with longer depolarizations. This result suggested that occupancy of an intermediate inactivation state (IM) facilitates pore motions. Consistent with the known antagonism between alkali metals and a component of slow inactivation, kSS varied inversely with external [Na+]o. We examined the converse relationship, namely the effect of pore flexibility on gating, by measuring recovery from inactivation in Y401C+E758C (YC/EC) channels. Under oxidative conditions, recovery from inactivation was slower than in a reduced environment in which the spontaneous YC/EC cross-link is disrupted. The most prominent effects were slowing of a component with intermediate recovery kinetics, with diminution of its relative amplitude. We conclude that occupancy of an intermediate inactivation state facilitates motions of the P segments; conversely, flexibility of the P segments alters an intermediate component of inactivation.

Modulation of the decay of Ca2+-activated Cl- currents in rabbit portal vein smooth muscle cells by external anions

1. The effects of external anions on the decay kinetics of Ca2+-activated Cl- currents (ICl(Ca)) were studied in smooth muscle cells isolated from rabbit portal vein using the perforated patch whole-cell voltage clamp technique. 2. In normal NaCl-containing external solution the decay of spontaneous Ca2+-activated Cl- currents (STICs) and Ca2+-activated Cl- 'tail' currents (Itail) was described by a single exponential with a time constant (tau) that was prolonged by external anions which are more permeable than Cl- (Br-, I- and SCN-) and accelerated by less permeant anions. However, intracellular I- did not affect the tau of STICs and Itail. 3. There was a positive correlation between the ability of an external anion to affect the decay tau of ICl(Ca) and its permeability relative to Cl-. 4. The voltage dependence of STIC and Itail decay was not affected by external or internal anions. 5. External permeating anions were not obligatory for activation of ICl(Ca) and STIC tau was not altered in Cl--free external solution. 6. Modulation of tau by mole fractions of SCN- and Cl- ions was fitted by a logistic curve, suggesting competition between SCN- and Cl- ions for a binding site. 7. In conclusion, external anions affect the decay of ICl(Ca) by a mechanism compatible with an interaction with a binding site which modulates Cl- channel kinetics.

Ultra-slow inactivation in mu1 Na+ channels is produced by a structural rearrangement of the outer vestibule

While studying the adult rat skeletal muscle Na+ channel outer vestibule, we found that certain mutations of the lysine residue in the domain III P region at amino acid position 1237 of the alpha subunit, which is essential for the Na+ selectivity of the channel, produced substantial changes in the inactivation process. When skeletal muscle alpha subunits (micro1) with K1237 mutated to either serine (K1237S) or glutamic acid (K1237E) were expressed in Xenopus oocytes and depolarized for several minutes, the channels entered a state of inactivation from which recovery was very slow, i.e., the time constants of entry into and exit from this state were in the order of approximately 100 s. We refer to this process as "ultra-slow inactivation". By contrast, wild-type channels and channels with the charge-preserving mutation K1237R largely recovered within approximately 60 s, with only 20-30% of the current showing ultra-slow recovery. Coexpression of the rat brain beta1 subunit along with the K1237E alpha subunit tended to accelerate the faster components of recovery from inactivation, as has been reported previously of native channels, but had no effect on the mutation-induced ultra-slow inactivation. This implied that ultra-slow inactivation was a distinct process different from normal inactivation. Binding to the pore of a partially blocking peptide reduced the number of channels entering the ultra-slow inactivation state, possibly by interference with a structural rearrangement of the outer vestibule. Thus, ultra-slow inactivation, favored by charge-altering mutations at site 1237 in micro1 Na+ channels, may be analogous to C-type inactivation in Shaker K+ channels.

Molecular dynamics of the sodium channel pore vary with gating: interactions between P-segment motions and inactivation

Disulfide trapping studies have revealed that the pore-lining (P) segments of voltage-dependent sodium channels undergo sizable motions on a subsecond time scale. Such motions of the pore may be necessary for selective ion translocation. Although traditionally viewed as separable properties, gating and permeation are now known to interact extensively in various classes of channels. We have investigated the interaction of pore motions and voltage-dependent gating in micro1 sodium channels engineered to contain two cysteines within the P segments. Rates of catalyzed internal disulfide formation (kSS) were measured in K1237C+W1531C mutant channels expressed in oocytes. During repetitive voltage-clamp depolarizations, increasing the pulse duration had biphasic effects on the kSS, which first increased to a maximum at 200 msec and then decreased with longer depolarizations. This result suggested that occupancy of an intermediate inactivation state (IM) facilitates pore motions. Consistent with the known antagonism between alkali metals and a component of slow inactivation, kSS varied inversely with external [Na+]o. We examined the converse relationship, namely the effect of pore flexibility on gating, by measuring recovery from inactivation in Y401C+E758C (YC/EC) channels. Under oxidative conditions, recovery from inactivation was slower than in a reduced environment in which the spontaneous YC/EC cross-link is disrupted. The most prominent effects were slowing of a component with intermediate recovery kinetics, with diminution of its relative amplitude. We conclude that occupancy of an intermediate inactivation state facilitates motions of the P segments; conversely, flexibility of the P segments alters an intermediate component of inactivation.

Gating current studies reveal both intra- and extracellular cation modulation of K+ channel deactivation

1. The presence of permeant ions can modulate the rate of gating charge return in wild-type human heart K+ (hKv1.5) channels. Here we employ gating current measurements in a non-conducting mutant, W472F, of the hKv1.5 channel to investigate how different cations can modulate charge return and whether the actions can be specifically localized at the internal as well as the external mouth of the channel pore. 2. Intracellular cations were effective at accelerating charge return in the sequence Cs+ > Rb+ > K+ > Na+ > NMG+. Extracellular cations accelerated charge return with the selectivity sequence Cs+ > Rb+ > Na+ = NMG+. 3. Intracellular and extracellular cation actions were of relatively low affinity. The Kd for preventing slowing of the time constant of the off-gating current decay (tau off) was 20.2 mM for intracellular Cs+ (Cs+i) and 358 mM for extracellular Cs+ (Cs+o). 4. Both intracellular and extracellular cations can regulate the rate of charge return during deactivation of hKv1.5, but intracellular cations are more effective. We suggest that ion crystal radius is an important determinant of this action, with larger ions preventing slowing more effectively. Important parallels exist with cation-dependent modulation of slow inactivation of ionic currents in this channel. However, further experiments are required to understand the exact relationship between acceleration of charge return and the slowing of inactivation of ionic currents by cations.

Pore mutations alter closing and opening kinetics in Shaker K+ channels

1. We have studied the effects of mutations of amino acids in the pore (positions 447 and 449) and the elevation of extracellular [K+] on the closing and opening kinetics of Shaker B K+ channels transiently expressed in Chinese hamster ovary (CHO) cells. 2. Mutant D447E had closing and C-type inactivation kinetics which were faster than the wild-type channel. These processes were slowed by increasing extracellular [K+] and in these conditions the channels exhibited linear instantaneous current-voltage relationships. Thus, the mutation seems to produce uniform decrease of occupancy by K+ in sites along the channel pore where the cation competes with closing and C-type inactivation. 3. In other mutants also showing K+-dependent fast C-type inactivation, closing was found to be slower than in the wild-type channel and insensitive to variations in external [K+]. These characteristics were particularly apparent in mutant T449K which even in high [K+] has a non-linear instantaneous current-voltage relationship with marked saturation of the inward current recorded at negative membrane potentials. Hence, in this channel type occupation by K+ of the pore appears to be non-uniform with low occupancy of sites near the outer entrance and saturation of the sites accessible from the internal solution. 4. The results show that channel closing is influenced by changes in the pore structure leading to alterations in the occupation of the channels by permeant cations. The differential effects of pore mutations and high external [K+] on closing and C-type inactivation indicate that the respective gates are associated with separate domains of the molecule. 5. Point mutations in the pore sequence can also lead to modifications in channel opening. In general, channels with fast C-type inactivation also show a fast rising phase of activation. However, these effects appear not to be due to primary modifications of the activation process but to arise from the coupling of activation and C-type inactivation. 6. These data, demonstrating that the pore structure influences most of the gating parameters of K+ channels, give further insight into the mechanisms underlying the modulation of K+ channel function by changes in the ionic composition in the extracellular milieu.

Permeation and block of the skeletal muscle chloride channel, ClC-1, by foreign anions

A distinctive feature of the voltage-dependent chloride channels ClC-0 (the Torpedo electroplaque chloride channel) and ClC-1 (the major skeletal muscle chloride channel) is that chloride acts as a ligand to its own channel, regulating channel opening and so controlling the permeation of its own species. We have now studied the permeation of a number of foreign anions through ClC-1 using voltage-clamp techniques on Xenopus oocytes and Sf9 cells expressing human (hClC-1) or rat (rClC-1) isoforms, respectively. From their effect on channel gating, the anions presented in this paper can be divided into three groups: impermeant or poorly permeant anions that can not replace Cl- as a channel opener and do not block the channel appreciably (glutamate, gluconate, HCO3-, BrO3-); impermeant anions that can open the channel and show significant block (methanesulfonate, cyclamate); and permeant anions that replace Cl- at the regulatory binding site but impair Cl- passage through the channel pore (Br-, NO3-, ClO3-, I-, ClO4-, SCN-). The permeability sequence for rClC-1, SCN- approximately ClO4- > Cl- > Br- > NO3- approximately ClO3- > I- >> BrO3- > HCO3- >> methanesulfonate approximately cyclamate approximately glutamate, was different from the sequence determined for blocking potency and ability to shift the Popen curve, SCN- approximately ClO4- > I- > NO3- approximately ClO3- approximately methanesulfonate > Br- > cyclamate > BrO3- > HCO3- > glutamate, implying that the regulatory binding site that opens the channel is different from the selectivity center and situated closer to the external side. Channel block by foreign anions is voltage dependent and can be entirely accounted for by reduction in single channel conductance. Minimum pore diameter was estimated to be approximately 4.5 A. Anomalous mole-fraction effects found for permeability ratios and conductance in mixtures of Cl- and SCN- or ClO4- suggest a multi-ion pore. Hydrophobic interactions with the wall of the channel pore may explain discrepancies between the measured permeabilities of some anions and their size.

Modelling the activation, opening, inactivation and reopening of the voltage-gated sodium channel

A model of the voltage-gated sodium channel is put forward suggesting that the four S4 voltage-sensors behave as screw-helices making a series of discrete transitions that carry one elementary charge for each notch of the screw helix. After the channel has been activated by the first two steps R in equilibrium with P in equilibrium with A in all four domains, followed by a voltage-independent rearrangement, it is opened by a third cooperative step A in equilibrium with B in domains I, II and III in conjunction with hydration. Inactivation is a voltage-dependent process controlled by the third step A in equilibrium with I in sensor IVS4, and the closing of the channel is brought about its dehydration. From the inactivated steady state the channel may be reopened by a fourth step, I in equilibrium with C in sensor IVS4 and rehydration. The computed kinetics of the model are shown to conform closely with those observed experimentally.