Enzymatic synthesis of 2'-modified nucleic acids: identification of important phosphate and ribose moieties in RNase P substrates

Polymerization-sensitive switch-on monomer for terminal transferase activity assay

We herein describe a simple but efficient method for the determination of terminal transferase (TdT) activity, which relies on our finding that Fe(III)-quenched boron-dipyrromethene (BODIPY)-ATP is utilized as a switch-on monomer for polymerization and enables the facile synthesis of fluorescence oligonucleotides without additional, post-processing steps. As TdT carries out the synthesis of DNA by adding the monomers into growing chains, Fe(III) is displaced from BODIPY with the release of pyrophosphate group, which consequently leads to the generation of highly fluorescent long oligonucleotides. With this strategy, we selectively detected the TdT activity with high sensitivity. In addition, its practical applicability was successfully demonstrated by determining TdT activities in human serum.

Cotranscriptional Production of Chemically Modified RNA Nanoparticles

RNA nanoparticles consisting of multiple RNA strands of different sequences forming various three-dimensional structures emerge as promising carriers of siRNAs, RNA aptamers, and ribozymes. In vitro transcription of a mixture of dsDNA templates encoding all the subunits of the RNA nanoparticle may result in cotranscriptional self-assembly of the nanoparticle. Based on our experience with production of RNA nanorings, RNA nanocubes, and RNA three-way junctions, we propose a strategy for optimization of the cotranscriptional production of chemically modified ribonuclease-resistant RNA nanoparticles.

Modified Nucleic Acid for Systematic Evolution of RNA Ligands by Exponential Enrichment

Various types of modified nucleic acid were tested for systematic evolution of ligands by exponential enrichment (SELEX) or in vitro evolution. T7 RNA polymerase accepted cytidine triphosphate with a biotinyl group at the N4-position of cytosine, adenosine triphosphate with an aminohexyl group at the N6-position of adenine, and 2T-amino-2′-deoxyuridine triphosphate as substrates for transcription of DNA containing a random sequence. However, uridine triphosphate with a nitroveratryloxy group at the 2′-position and adenosine triphosphate with an aminohexyl group at the 8-position of adenine were not accepted. The transcribed products served as templates for the production of cDNA by reverse transcription. These findings indicate that some modified nucleotides can be applied to the present SELEX protocol.

Modified Nucleoside Triphosphates for In-vitro Selection Techniques

The development of SELEX (Selective Enhancement of Ligands by Exponential Enrichment) provides a powerful tool for the search of functional oligonucleotides with the ability to bind ligands with high affinity and selectivity (aptamers) and for the discovery of nucleic acid sequences with diverse enzymatic activities (ribozymes and DNAzymes). This technique has been extensively applied to the selection of natural DNA or RNA molecules but, in order to improve chemical and structural diversity as well as for particular applications where further chemical or biological stability is necessary, the extension of this strategy to modified oligonucleotides is desirable. Taking into account these needs, this review intends to collect the research carried out during the past years, focusing mainly on the use of modified nucleotides in SELEX and the development of mutant enzymes for broadening nucleoside triphosphates acceptance. In addition, comments regarding the synthesis of modified nucleoside triphosphate will be briefly discussed.

Aptamer-mediated delivery of chemotherapy to pancreatic cancer cells

Gemcitabine is a nucleoside analog that is currently the best available single-agent chemotherapeutic drug for pancreatic cancer. However, efficacy is limited by our inability to deliver sufficient active metabolite into cancer cells without toxic effects on normal tissues. Targeted delivery of gemcitabine into cancer cells could maximize effectiveness and concurrently minimize toxic side effects by reducing uptake into normal cells. Most pancreatic cancers overexpress epidermal growth factor receptor (EGFR), a trans-membrane receptor tyrosine kinase. We utilized a nuclease resistant RNA aptamer that binds and is internalized by EGFR on pancreatic cancer cells to deliver gemcitabine-containing polymers into EGFR-expressing cells and inhibit cell proliferation in vitro. This approach to cell type-specific therapy can be adapted to other targets and to other types of therapeutic cargo.

Analysis of catalytic RNA structure and function by nucleotide analog interference mapping

Nucleotide analog interference mapping (NAIM) is a quick and efficient method to define concurrently, yet singly, the importance of specific functional groups at particular nucleotide residues to the structure and function of an RNA. NAIM can be utilized on virtually any RNA with an assayable function. The method hinges on the ability to successfully incorporate, within an RNA transcript, various 5'-O-(1-thio)nucleoside analogs randomly via in vitro transcription. This could be achieved by using wild-type or Y639F mutant T7 RNA polymerase, thereby creating a pool of analog doped RNAs. The pool when subjected to a selection step to separate the active transcripts from the inactive ones leads to the identification of functional groups that are crucial for RNA activity. The technique can be used to study ribozyme structure and function via monitoring of cleavage or ligation reactions, define functional groups critical for RNA folding, RNA-RNA interactions, and RNA interactions with proteins, metals, or other small molecules. All major classes of catalytic RNAs have been probed by NAIM. This is a generalized approach that should provide the scientific community with the tools to better understand RNA structure-activity relationships.

Enzymatic recognition of 2'-modified ribonucleoside 5'-triphosphates: towards the evolution of versatile aptamers

The quest for effective, selective and nontoxic nucleic-acid-based drugs has led to designing modifications of naturally occurring nucleosides. A number of modified nucleic acids have been made in the past decades in the hope that they would prove useful in target-validation studies and therapeutic applications involving antisense, RNAi, aptamer, and ribozyme-based technologies. Since their invention in the early 1990s, aptamers have emerged as a very promising class of therapeutics, with one drug entering the market for the treatment of age-related macular degeneration. To combat the limitations of aptamers containing naturally occurring nucleotides, chemically modified nucleotides have to be used. In order to apply modified nucleotides in aptamer drug development, their enzyme-recognition capabilities must be understood. For this purpose, several modified nucleoside 5'-triphosphates were synthesized and investigated as substrates for various enzymes. Herein, we review studies on the enzyme-recognition of various 2'-sugar-modified NTPs that were carried out with a view to their effective utilization in SELEX processes to generate versatile aptamers.

Evolution of functional nucleic acids in the presence of nonheritable backbone heterogeneity

Multiple lines of evidence support the hypothesis that the early evolution of life was dominated by RNA, which can both transfer information from generation to generation through replication directed by base-pairing, and carry out biochemical activities by folding into functional structures. To understand how life emerged from prebiotic chemistry we must therefore explain the steps that led to the emergence of the RNA world, and in particular, the synthesis of RNA. The generation of pools of highly pure ribonucleotides on the early Earth seems unlikely, but the presence of alternative nucleotides would support the assembly of nucleic acid polymers containing nonheritable backbone heterogeneity. We suggest that homogeneous monomers might not have been necessary if populations of heterogeneous nucleic acid molecules could evolve reproducible function. For such evolution to be possible, function would have to be maintained despite the repeated scrambling of backbone chemistry from generation to generation. We have tested this possibility in a simplified model system, by using a T7 RNA polymerase variant capable of transcribing nucleic acids that contain an approximately 11 mixture of deoxy- and ribonucleotides. We readily isolated nucleotide-binding aptamers by utilizing an in vitro selection process that shuffles the order of deoxy- and ribonucleotides in each round. We describe two such RNA/DNA mosaic nucleic acid aptamers that specifically bind ATP and GTP, respectively. We conclude that nonheritable variations in nucleic acid backbone structure may not have posed an insurmountable barrier to the emergence of functionality in early nucleic acids.

A class I ligase ribozyme with reduced Mg2+ dependence: Selection, sequence analysis, and identification of functional tertiary interactions

The class I ligase was among the first ribozymes to have been isolated from random sequences and represents the catalytic core of several RNA-directed RNA polymerase ribozymes. The ligase is also notable for its catalytic efficiency and structural complexity. Here, we report an improved version of this ribozyme, arising from selection that targeted the kinetics of the chemical step. Compared with the parent ribozyme, the improved ligase achieves a modest increase in rate enhancement under the selective conditions and shows a sharp reduction in [Mg(2+)] dependence. Analysis of the sequences and kinetics of successful clones suggests which mutations play the greatest part in these improvements. Moreover, backbone and nucleobase interference maps of the parent and improved ligase ribozymes complement the newly solved crystal structure of the improved ligase to identify the functionally significant interactions underlying the catalytic ability and structural complexity of the ligase ribozyme.

Effective inhibition of human cytomegalovirus gene expression by DNA-based external guide sequences

To investigate whether a 12 nucleotide DNA-based miniEGSs can silence the expression of human cytomegalovirus (HCMV) UL49 gene efficiently, A HeLa cell line stably expressing UL49 gene was constructed and the putative miniEGSs (UL49-miniEGSs) were assayed in the stable cell line. Quantitative RT-PCR and western blot results showed a reduction of 67% in UL49 expression level in HeLa cells that were transfected with UL49-miniEGSs. It was significantly different from that of mock and control miniEGSs (TK-miniEGSs) which were 1% and 7%, respectively. To further confirm the gene silence directed by UL49-miniEGSs with human RNase P, a mutant of UL49-miniEGSs was constructed and a modified 5'RACE was carried out. Data showed that the inhibition of UL49 gene expression directed by UL49-miniEGSs was RNase P-dependent and the cleavage of UL49 mRNA by RNase P was site specific. As a result, the length of DNA-based miniEGSs that could silence gene expression efficiently was only 12 nt. That is significantly less than any other oligonucleotide-based method of gene inactivation known so far. MiniEGSs may represent novel gene-targeting agents for the inhibition of viral genes and other human disease related gene expression.

Nucleotide analog interference mapping

Nucleotide analog interference mapping (NAIM) is a powerful chemogenetic technique that rapidly identifies chemical groups essential for RNA function. Using a series of phosphorothioate-tagged nucleotide analogs, each carrying different modifications of nucleobase or backbone functionalities, it is possible to simultaneously, yet individually, assess the contribution of particular functional groups to an RNA's activity at every position within the molecule. In contrast to traditional mutagenesis, which modifies RNA on the nucleobase level, the smallest mutable unit in a NAIM analysis is a single atom, providing a detailed description of interactions at critical nucleotides. Because the method introduces modified nucleotides by in vitro transcription, NAIM offers a straightforward and efficient approach to study any RNA that has a selectable function, and it can be applied to RNAs of nearly any length.

Probing RNA structure and function by nucleotide analog interference mapping

Nucleotide analog interference mapping (NAIM) can be used to simultaneously, yet individually, identify structurally or catalytically important functional groups within an RNA molecule. Phosphorothioate-tagged nucleotides and nucleotide analogs are randomly incorporated into an RNA of interest by in vitro transcription. The phosphorothioate tag marks the site of substitution and identifies sites at which the modification affects the structure or function of the RNA molecule. This technique has been expanded to include identification of hydrogen bonding pairs (NAIS), ionizable functional groups, metal ion ligands, and the energetics of protein binding (QNAIM). The analogs, techniques, and data analysis used in NAIM are described here.

Three essential and conserved regions of the group II intron are proximal to the 5'-splice site

Despite the central role of group II introns in eukaryotic gene expression and their importance as biophysical and evolutionary model systems, group II intron tertiary structure is not well understood. In order to characterize the architectural organization of intron ai5gamma, we incorporated the photoreactive nucleotides s(4)U and s(6)dG at specific locations within the intron core and monitored the formation of cross-links in folded complexes. The resulting data reveal the locations for many of the most conserved, catalytically important regions of the intron (i.e., the J2/3 linker region, the IC1(i-ii) bulge in domain 1, the bulge of D5, and the 5'-splice site), showing that all of these elements are closely colocalized. In addition, we show by nucleotide analog interference mapping (NAIM) that a specific functional group in J2/3 plays a role in first-step catalysis, which is consistent with its apparent proximity to other first-step components. These results extend our understanding of active-site architecture during the first step of group II intron self-splicing and they provide a structural basis for spliceosomal comparison.

Template-dependent incorporation of 8-N3AMP into RNA with bacteriophage T7 RNA polymerase

UV-induced photochemical crosslinking is a powerful approach that can be used for the identification of specific interactions involving nucleic acid-protein and nucleic acid-nucleic acid complexes. 8-AzidoATP (8-N(3)ATP) is a photoaffinity-labeling agent which has been widely used to elucidate the ATP binding site of a variety of proteins. However, its true potential as a photoactivatable nucleotide analog could not be exploited due to the lack of 8-azidoadenosine phosphoramidite, a monomer used in the synthesis of RNA, and the inability of 8-N(3)ATP to serve as an efficient substrate for bacteriophage RNA polymerase. In this study, we explored the ability of SP6, T3, and T7 RNA polymerases and metal ion cofactors to catalyze the incorporation of 8-N(3)AMP into RNA. Whereas transcription buffer containing 2.0-2.5 mM Mn(2+) supports T7 RNA polymerase-mediated insertion of 8-N(3)AMP into RNA, a mixture of 2.5 mM Mn(2+) and 2.5 mM Mg(2+) further improves the yield of 8-N(3)AMP-containing transcript. In addition, both RNA transcription and reverse transcription proceed with high fidelity for the incorporation of 8-N(3)AMP and complementary residue, respectively. Finally, we show that a high-affinity MS2 coat protein binding sequence, in which adenosine residues were replaced by 8-azidoadenosine, crosslinks to the coat protein of the Escherichia coli phage MS2.

Synthesis and transcription studies on 5'-triphosphates derived from 2'-C-branched-uridines: 2'-homouridine-5'-triphosphate is a substrate for T7 RNA polymerase

The 5'-triphosphates of 2'-hydroxymethyluridine (2'-homouridine) and 2'-hydroxyethyluridine were prepared from the corresponding acetyl-protected nucleosides by initial phosphitylation with 2-chloro-5,6-benzo-1,2,3-dioxaphosphorin-4-one. 2'-Acetamidouridine 5'-triphosphate was prepared in an analogous fashion from uridine 2'-C-, 3'-O-gamma-butyrolactone, in which the 3'-hydroxyl group is internally protected as the lactone. Subsequent treatment with ammonia gave the required acetamido triphosphate. All three triphosphates were investigated as substrates for T7 RNA polymerase and a Y639F mutant of this enzyme. 2'-Homouridine triphosphate was found to be a substrate for the wild-type enzyme in the presence of manganese and was specifically incorporated into short RNA transcripts (20 and 21 nucleotides in length). The presence of the analogue within the transcripts was confirmed through its resistance to alkaline hydrolysis. Gel electrophoretic analysis also showed that 2'-homouridine could be multiply incorporated into a transcript with a length of 75 nucleotides. This is the first report of a 2'-deoxy-2'-alpha-C-branched nucleoside 5'-triphosphate acting as a substrate for T7 RNA polymerase. The 2'-hydroxyethyl- and 2'-acetamido -uridine triphosphates were not substrates for the enzymes.

Expanding the Substrate Repertoire of a DNA Polymerase by Directed Evolution

Nucleic acid polymerases are the most important reagents in biotechnology. Unfortunately, their high substrate specificity severely limits their applications. Polymerases with tailored substrate repertoires would significantly expand their potential and allow enzymatic synthesis of unnatural polymers for in vivo and in vitro applications. For example, the ability to synthesize 2'-O-methyl-modified polymers would provide access to materials possessing properties that make them attractive for biotechnology and therapeutic applications, but unfortunately, no known polymerases are capable of efficiently accepting these modified substrates. To evolve such enzymes, we have developed an activity-based selection method which isolates polymerase mutants with the desired property from libraries of the enzyme displayed on phage. In this report, mutants that could efficiently synthesize an unnatural polymer from 2'-O-methyl ribonucleoside triphosphates were immobilized and isolated by means of their activity-dependent modification of a DNA oligonucleotide primer attached to the same phage particle. In each case, directed evolution resulted in relocating a critical side chain to a different position in the polypeptide, thus re-engineering the overall active site while preserving critical protein-DNA interactions. Remarkably, one evolved polymerase is shown to incorporate the modified substrates with an efficiency and fidelity equivalent to that of the wild-type enzyme with natural substrates.

Small structural costs for evolution from RNA to RNP-based catalysis

Typical RNA-based cellular catalysts achieve their active structures only as complexes with protein cofactors, implying that protein binding compensates for some structural deficiencies in the RNA. An unresolved question was the extent to which protein-facilitation imposes additional structural costs, by requiring that an RNA maintain structures required for protein binding, beyond those required for catalysis. We used nucleotide analog interference to identify initially 71 functional group substitutions at phosphate, 2'-ribose, and adenosine base positions that compromise RNA self-splicing in the bI5 group I intron. Protein-facilitated splicing by CBP2 suppresses 11 of 30 interfering substitutions at the RNA backbone and a greater fraction, 27 of 41, at the adenosine base, including at structures conserved among group I introns. Only one substitution directly interferes with protein binding but not with self-splicing. This substitution, plus three adenosine base modifications that interfere more strongly in CBP2-dependent splicing than in self-splicing, yield a cost for protein facilitation of only four functional groups, as approximated by this set of analogs. The small observed structural cost provides a strong physical rationale for the evolutionary drive from RNA to RNP-based function in biology. Remarkably, the four extra requirements do not appear to report disruption of direct protein-RNA contacts and instead likely reflect design against misfolding rather than for maintenance of a protein-binding site.

Distinct modes of mature and precursor tRNA binding to Escherichia coli RNase P RNA revealed by NAIM analyses

We have analyzed by nucleotide analog interference mapping (NAIM) pools of precursor or mature tRNA molecules, carrying a low level of Rp-RMPalphaS (R = A, G, I) or Rp-c7-deaza-RMPalphaS (R = A, G) modifications, to identify functional groups that contribute to the specific interaction with and processing efficiency by Escherichia coli RNase P RNA. The majority of interferences were found in the acceptor stem, T arm, and D arm, including the strongest effects observed at positions G19, G53, A58, and G71. In some cases (interferences at G5, G18, and G71), the affected functional groups are candidates for direct contacts with RNase P RNA. Several modifications disrupt intramolecular tertiary contacts known to stabilize the authentic tRNA fold. Such indirect interference effects were informative as well, because they allowed us to compare the structural constraints required for ptRNA processing versus product binding. Our ptRNA processing and mature tRNA binding NAIM analyses revealed overlapping but nonidentical patterns of interference effects, suggesting that substrate binding and cleavage involves binding modes or conformational states distinct from the binding mode of mature tRNA, the product of the reaction.

Magnesium ions mediate contacts between phosphoryl oxygens at positions 2122 and 2176 of the 23S rRNA and ribosomal protein L1

The complex of ribosomal protein L1 with 23S rRNA from Escherichia coli is of great interest because of the unique structural and functional aspects of this ribonucleoprotein domain. We have minimized the binding site for protein L1 on the 23S rRNA to nt 2120-2129, 2159-2162, and 2167-2178. This RNA fragment consists of two helices as well as an interconnecting loop of unknown structure. RNA molecules corresponding to the minimized L1 binding site, in which G, A, U, or C were individually replaced by their deoxyribo- (dN) or alpha-thio- (rNaS) analogs have been synthesized by T7 transcription in vitro and analyzed for their ability to bind protein L1. It has been demonstrated that the substitution of rNaS at position 2122 or 2176 decreases the affinity of the RNA for the protein in the presence of magnesium five- to tenfold, whereas the same changes have little effect on binding in the presence of manganese. This suggests that Rp oxygens in the phosphates preceding positions 2122 and 2176 are coordinated with Mg2+ and may participate in L1-23S rRNA interaction via magnesium bridges. We have also shown that this interaction is impaired by the presence of dC at position 2122 coupled with the presence of deoxyribonucleotide(s) at other positions in the RNA. This study demonstrates that the ribose-phosphate backbone of the helix encompassing nt 2120-2124/2174-2178 is intimately involved in the interaction of protein L1 with the 23S rRNA. In particular, we suggest that this helix is positioned in the cleft between the two domains of protein L1.

Functional anatomy of a dsRNA trigger: differential requirement for the two trigger strands in RNA interference

In RNA-mediated interference (RNAi), externally provided mixtures of sense and antisense RNA trigger concerted degradation of homologous cellular RNAs. We show that RNAi requires duplex formation between the two trigger strands, that the duplex must include a region of identity between trigger and target RNAs, and that duplexes as short as 26 bp can trigger RNAi. Consistent with in vitro observations, a fraction of input dsRNA is converted in vivo to short segments of approximately 25 nt. Interference assays with modified dsRNAs indicate precise chemical requirements for both bases and backbone of the RNA trigger. Strikingly, certain modifications are well tolerated on the sense, but not the antisense, strand, indicating that the two trigger strands have distinct roles in the interference process.

A chemical phylogeny of group I introns based upon interference mapping of a bacterial ribozyme

Despite its small size, the 205 nt group I intron from Azoarcus tRNA(Ile) is an exceptionally stable self-splicing RNA. This IC3 class intron retains the conserved secondary structural elements common to group I ribozymes, but lacks several peripheral helices. These features make it an ideal system to establish the conserved chemical basis of group I intron activity. We collected nucleotide analog interference mapping (NAIM) data of the Azoarcus intron using 14 analogs that modified the phosphate backbone, the ribose sugar, or the purine base functional groups. In conjunction with a complete interference set collected on the Tetrahymena group I intron (IC1 class), these data define a "chemical phylogeny" of functional groups that are important for the activity of both introns and that may be common chemical features of group I intron catalysts. The data identify the functional moieties most likely to play a conserved role as ligands for catalytic metal ions, the substrate helix, and the guanosine cofactor. These include backbone functional groups whose nucleotide identity is not conserved, and hence are difficult to identify by standard phylogenetic sequence comparisons. The data suggest that both introns utilize an equivalent set of long range tertiary interactions for 5'-splice site selection between the P1 substrate helix and its receptor in the J4/5 asymmetric bulge, as well as an equivalent set of 2'-OH groups for P1 helix docking into most of the single stranded segment J8/7. However, the Azoarcus intron appears to make an alternative set of interactions at the base of the P1 helix and at the 5'-end of the J8/7. Extensive differences were observed within the intron peripheral domains, particularly in P2 and P8 where the Azoarcus data strongly support the proposed formation of a tetraloop-tetraloop receptor interaction. This chemical phylogeny for group I intron catalysis helps to refine structural models of the RNA active site and identifies functional groups that should be carefully investigated for their role in transition state stabilization.

Ribozyme chemogenetics

In this review I will outline several chemogenetic approaches used to determine the chemical basis of large ribozyme function and structure. The term chemogenetics was first used to describe site-specific functional group modification experiments in the analysis of DNA-protein interactions. Within the past few years equivalent experiments have been performed on large catalytic RNAs using both single-site substitution and interference mapping techniques with nucleotide analogues. While functional group mutagenesis is an important aspect of a chemogenetic approach, chemical correlates to genetic revertants and suppressors must also be realized for the genetic analogy to be intellectually valid and experimentally useful. Several examples of functional group revertants and suppressors have now been obtained within the Tetrahymena group I ribozyme. These experiments define an ensemble of tertiary hydrogen bonds that have made it possible to construct a detailed model of the ribozyme catalytic core. The model includes a functionally important monovalent metal ion binding site, a wobble-wobble receptor motif for helix-helix packing interactions, and a minor groove triple helix.

Nucleotide analog interference mapping of the hairpin ribozyme: implications for secondary and tertiary structure formation

The hairpin ribozyme is a small, naturally occurring RNA capable of folding into a distinct three-dimensional structure and catalyzing a specific phosphodiester transfer reaction. We have adapted a high throughput screening procedure entitled nucleotide analog interference mapping (NAIM) to identify functional groups important for proper folding and catalysis of this ribozyme. A total of 18 phosphorothioate-tagged nucleotide analogs were used to determine the contribution made by individual ribose 2'-OH and purine functional groups to the hairpin ribozyme ligation reaction. Substitution with 2'-deoxy-nucleotide analogs disrupted activity at six sites within the ribozyme, and a unique interference pattern was observed at each of the 11 conserved purine nucleotides. In most cases where such information is available, the NAIM data agree with the previously reported single-site substitution results. The interference patterns are interpreted in comparison to the isolated loop A and loop B NMR structures and a model of the intact ribozyme. These data provide biochemical evidence in support of many, but not all, of the non-canonical base-pairs observed by NMR in each loop, and identify the functional groups most likely to participate in the tertiary interface between loop A and loop B. These groups include the 2'-OH groups of A10, G11, U12, C25, and A38, the exocyclic amine of G11, and the minor groove edge of A9 and A24. The data also predict non-A form sugar pucker geometry at U39 and U41. Based upon these results, a revised model for the loop A tertiary interaction with loop B is proposed. This work defines the chemical basis of purine nucleotide conservation in the hairpin ribozyme, and provides a basis for the design and interpretation of interference suppression experiments.

A chemogenetic approach to RNA function/structure analysis

Almost two dozen nucleotide analogs have been synthesized with alpha-phosphorothioate-tagged triphosphates and utilized in an interference modification approach termed Nucleotide Analog Interference Mapping. This method has made it possible to determine the chemical basis of RNA function and structure, including the identification of new rules for RNA helix packing, the functional analysis of a binding site for monovalent metal ions within RNA and the characterization of the catalytic mechanism of RNA enzymes.

Nucleotide analog interference mapping

Single-atom substitution experiments provide atomic resolution biochemical information concerning RNA structure and function. Traditionally, these experiments are performed using chimeric RNAs generated by reassembly of full-length RNA from a synthetic substituted oligonucleotide and a truncated RNA transcript. Unfortunately, this technique is limited by the technical difficulty of assembling and measuring the effect of each singly substituted molecule in a given RNA. Here we review an alternate method for rapidly screening the effect of chemical group substitutions on RNA function. Nucleotide analog interference mapping is a chemogenetic approach that utilizes a series 5'-O-(1-thio)-nucleoside analog triphosphates to simultaneously, yet individually, probe the contribution of a functional group at every nucleotide position in an RNA molecule. A population of randomly substituted RNAs is prepared by including phosphorothioate-tagged nucleotide analogs in an in vitro transcription reaction. The active molecules in the RNA population are selected by an activity assay, and the location of the analog substitution detrimental to activity is identified by cleavage at the phosphorothioate tag with iodine and resolution of the cleavage fragments by gel electrophoresis. This method, which is as easy as RNA sequencing, is applicable to any RNA that can be transcribed in vitro and has an assayable function. Here we describe protocols for the synthesis of phosphorothioate-tagged analogs and their incorporation into RNA transcripts. The incorporation properties and unique biochemical signatures of each individual analog are discussed.

Targeted cleavage of RNA molecules by human RNase P using minimized external guide sequences

The endoribonuclease RNase P processes tRNA-like structures that are assembled out of two separate strands. In these bimolecular constructs, one of the strands is cleaved by the enzyme, and the other one is called the external guide sequence (EGS). A number of EGS with different mutations and deletions were tested for the ability to induce cleavage with human RNase P. Different domains of the original tRNAtyr-like structure were deleted or modified. The anticodon stem and loop and the variable loop could be deleted without a detrimental effect on recognition by RNase P. Modifications in the lengths of T stem and aminoacyl acceptor stem led to a decrease in the relative amount of cleavage, whereas modifications of the D stem were more permissible. Single nucleotide deletions in the T loop reduced cleavage to different extents, depending on the position. Values for the Kd of complex formation of bimolecular constructs with annealing arms of varying lengths ranged from 0.2 nM to 28 nM. A cleavage rate of 1 min(-1) was measured for both the bimolecular target-EGS complex and tRNA precursor.

A minor groove RNA triple helix within the catalytic core of a group I intron

Close packing of several double helical and single stranded RNA elements is required for the Tetrahymena group I ribozyme to achieve catalysis. The chemical basis of these packing interactions is largely unknown. Using nucleotide analog interference suppression (NAIS), we demonstrate that the P1 substrate helix and J8/7 single stranded segment form an extended minor groove triple helix within the catalytic core of the ribozyme. Because each triple in the complex is mediated by at least one 2'-OH group, this substrate recognition triplex is unique to RNA and is fundamentally different from major groove homopurine-homopyrimidine triplexes. We have incorporated these biochemical data into a structural model of the ribozyme core that explains how the J8/7 strand organizes several helices within this complex RNA tertiary structure.

Defining functional groups, core structural features and inter-domain tertiary contacts essential for group II intron self-splicing: a NAIM analysis

Group II introns are self-splicing RNA molecules that are of considerable interest as ribozymes, mobile genetic elements and examples of folded RNA. Although these introns are among the most common ribozymes, little is known about the chemical and structural determinants for their reactivity. By using nucleotide analog interference mapping (NAIM), it has been possible to identify the nucleotide functional groups (Rp phosphoryls, 2'-hydroxyls, guanosine exocyclic amines, adenosine N7 and N6) that are most important for composing the catalytic core of the intron. The majority of interference effects occur in clusters located within the two catalytically essential Domains 1 and 5 (D1 and D5). Collectively, the NAIM results indicate that key tetraloop-receptor interactions display a specific chemical signature, that the epsilon-epsilon' interaction includes an elaborate array of additional features and that one of the most important core structures is an uncharacterized three-way junction in D1. By combining NAIM with site-directed mutagenesis, a new tertiary interaction, kappa-kappa', was identified between this region and the most catalytically important section of D5, adjacent to the AGC triad in stem 1. Together with the known zeta-zeta' interaction, kappa-kappa' anchors D5 firmly into the D1 scaffold, thereby presenting chemically essential D5 functionalities for participation in catalysis.

Modified oligonucleotides: synthesis and strategy for users

Synthetic oligonucleotide analogs have greatly aided our understanding of several biochemical processes. Efficient solid-phase and enzyme-assisted synthetic methods and the availability of modified base analogs have added to the utility of such oligonucleotides. In this review, we discuss the applications of synthetic oligonucleotides that contain backbone, base, and sugar modifications to investigate the mechanism and stereochemical aspects of biochemical reactions. We also discuss interference mapping of nucleic acid-protein interactions; spectroscopic analysis of biochemical reactions and nucleic acid structures; and nucleic acid cross-linking studies. The automation of oligonucleotide synthesis, the development of versatile phosphoramidite reagents, and efficient scale-up have expanded the application of modified oligonucleotides to diverse areas of fundamental and applied biological research. Numerous reports have covered oligonucleotides for which modifications have been made of the phosphodiester backbone, of the purine and pyrimidine heterocyclic bases, and of the sugar moiety; these modifications serve as structural and mechanistic probes. In this chapter, we review the range, scope, and practical utility of such chemically modified oligonucleotides. Because of space limitations, we discuss only those oligonucleotides that contain phosphate and phosphate analogs as internucleotidic linkages.

Identification by modification-interference of purine N-7 and ribose 2'-OH groups critical for catalysis by bacterial ribonuclease P

The RNA subunit of bacterial ribonuclease P is a catalytic RNA that cleaves precursor tRNAs to generate mature tRNA 5' ends. A self-cleaving RNase P RNA-substrate conjugate was used in modification-interference analysis to identify purine N-7 and ribose 2'-hydroxyl functional groups that are critical to catalysis. We identify six adenine N-7 groups and only one 2'-hydroxyl that, when substituted with 7-deazaadenine or 2'-deoxy analogues, respectively, reduce the RNase P catalytic rate approximately 10-fold at pH 8 and limiting concentration of magnesium. Two sites of low-level interference by phosphorothioate modification were detected in addition to the four sites of strong interference documented previously. These modification-interference results, the absolute phylogenetic conservation of these functional groups in bacterial RNase P RNA, their proximity to the substrate-phosphate in the tertiary structure of the ribozyme-substrate complex, and the importance of some of the sites for binding of catalytic magnesium all implicate these functional groups as components of the RNase P active site. Five of the 7-deazaadenine interferences are suppressed at pH 6, where the hydrolytic step is rate-limiting, or at saturating concentrations of magnesium. We propose, therefore, that these base functional groups are specifically engaged in the catalytic center of RNase P RNA, possibly by involvement in magnesium-dependent folding. One 7-deazaadenine interference and one 2'-deoxy-interference, although partially suppressed at pH 6, are not suppressed at saturating magnesium concentrations. This implicates these groups in magnesium-independent folding of the catalytic substructure of the ribozyme.

Short oligonucleotides as external guide sequences for site-specific cleavage of RNA molecules with human RNase P

Human RNase P recognizes a small model substrate consisting of only the 5' leader sequence, aminoacyl acceptor stem, and T stem and loop of a tRNA precursor. It was demonstrated here that a bimolecular construct in which the T loop is opened between G57 and A58 (tRNA numbering system) is still processed by RNase P. The strand that is cleaved can be considered the target RNA, whereas the other strand serves as an external guide sequence (EGS). The nucleotides corresponding to nt 58-60 in the T loop could be deleted without affecting cleavage of the substrate. Thus, the complete T loop can be replaced by the single-stranded sequence UUCG or UUCA (nt 55-57 in the T loop). The four nucleotides UUCR possibly form a structure that resembles the uridine turn in the T loop of tRNA. Because recognition by RNase P is independent of the helical sequence, this motif can be used for targeting RNA molecules for EGS-directed cleavage by human RNase P. Chemically modified EGSs with 2'-O-methyl groups also showed activity in inducing RNase P cleavage. Several 13-mer EGSs targeted to the 2.1-kb surface antigen mRNA of hepatitis B virus (HBV) were designed and tested using a co-transcriptional cleavage assay with a 2.1-kb HBV transcript. Some of the new EGSs were capable of inducing cleavage of the HBV RNA by RNase P.

The P15-loop of Escherichia coli RNase P RNA is an autonomous divalent metal ion binding domain

We have studied the structure and divalent metal ion binding of a domain of the ribozyme RNase P RNA that is involved in base pairing with its substrate. Our data suggest that the folding of this internal loop, the P15-loop, is similar irrespective of whether it is part of the full-length ribozyme or part of a model RNA molecule. We also conclude that this element constitutes an autonomous divalent metal ion binding domain of RNase P RNA and our data suggest that certain specific chemical groups within the P15-loop participate in coordination of divalent metal ions. Substitutions of the Sp- and Rp-oxygens with sulfur at a specific position in this loop result in a 2.5-5-fold less active ribozyme, suggesting that Mg2+ binding at this position contributes to function. Our findings strengthen the concept that small RNA building blocks remain basically unchanged when removed from their structural context and thus can be used as models for studies of their potential function and structure within native RNA molecules.

The chemical basis of adenosine conservation throughout the Tetrahymena ribozyme

Adenosines are present at a disproportionately high frequency within several RNA structural motifs. To explore the importance of individual adenosine functional groups for group I intron activity, we performed Nucleotide Analog Interference Mapping (NAIM) with a collection of adenosine analogues. This paper reports the synthesis, transcriptional incorporation, and the observed interference pattern throughout the Tetrahymena group I intron for eight adenosine derivatives tagged with an alpha-phosphorothioate linkage for use in NAIM. All of the analogues were accurately incorporated into the transcript as an A. The sites that interfere with the 3'-exon ligation reaction of the Tetrahymena intron are coincident with the sites of phylogenetic conservation, yet the interference patterns for each analogue are different. These interference data provide several biochemical constraints that improve our understanding of the Tetrahymena ribozyme structure. For example, the data support an essential A-platform within the J6/6a region, major groove packing of the P3 and P7 helices, minor groove packing of the P3 and J4/5 helices, and an axial model for binding of the guanosine cofactor. The data also identify several essential functional groups within a highly conserved single-stranded region in the core of the intron (J8/7). At four sites in the intron, interference was observed with 2'-fluoro A, but not with 2'-deoxy A. Based upon comparison with the P4-P6 crystal structure, this may provide a biochemical signature for nucleotide positions where the ribose sugar adopts an essential C2'-endo conformation. In other cases where there is interference with 2'-deoxy A, the presence or absence of 2'-fluoro A interference helps to establish whether the 2'-OH acts as a hydrogen bond donor or acceptor. Mapping of the Tetrahymena intron establishes a basis set of information that will allow these reagents to be used with confidence in systems that are less well understood.

Complementary sets of noncanonical base pairs mediate RNA helix packing in the group I intron active site

Helix packing is critical for RNA tertiary structure formation, although the rules for helix-helix association within structured RNAs are largely unknown. Docking of the substrate helix into the active site of the Tetrahymena group I ribozyme provides a model system to study this question. Using a novel chemogenetic method to analyze RNA structure in atomic detail, we report that complementary sets of noncanonical base pairs (a G.U wobble pair and two consecutively stacked sheared A.A pairs) create an RNA helix packing motif that is essential for 5'-splice site selection in the group I intron. This is likely to be a general motif for helix-helix interaction within the tertiary structures of many large RNAs.

RNA-protein interactions of an archaeal homotetrameric splicing endoribonuclease with an exceptional evolutionary history

The splicing endoribonuclease from Methanococcus jannaschii, a member of a recently defined family of enzymes involved in splicing of archaeal introns and eukaryotic nuclear tRNA introns, was isolated and shown by cross-linking studies to form a homotetramer in solution. A non-cleavable substrate analogue was synthesized by incorporating 2'-deoxyuridines at the two cleavage sites and complexed to the splicing enzyme. The complex was subjected to protein footprinting and the results implicated an RNP1-like sequence and a sequence region immediately N-terminal to a putative leucine zipper in substrate binding. In addition, a histidine residue (His125), positioned within a third RNA binding region, was shown to be involved in catalysis by mutagenesis. The splicing enzyme was localized on the central helix and the two 3 nt bulges of the conserved archaeal 'bulge-helix-bulge' substrate motif by RNA footprinting. Sequence comparison with the dimeric splicing enzyme from Halobacterium volcanii demonstrates that the latter is a tandemly repeated duplication of the former, where alternating segments within each protein half degenerated after the duplication event. Another duplication event, in the eukaryotic domain, produced two different homologues of the M.jannaschii-type enzyme structure. The data provide strong evidence that the tetrameric M.jannaschii enzyme consists of two isologously associated dimers, each similar to one H.volcanii monomer and each consisting of two monomers, where one face of monomer 1 and the opposite face of monomer 2 are involved in RNA binding.

Defining the chemical groups essential for Tetrahymena group I intron function by nucleotide analog interference mapping

Improved atomic resolution biochemical methods are needed to identify the chemical groups within an RNA that are essential to its activity. As a step toward this goal, we report the use of 5'-O-(1-thio)inosine monophosphate (IMP alphaS) in a nucleotide analog interference mapping (NAIM) assay that makes it possible to simultaneously, yet individually, determine the contribution of almost every N2 exocyclic amine of G within a large RNA. Using IMP alphaS, we identified the exocyclic amines that are essential for 5' or 3' exon ligation by the Tetrahymena group I intron. We report that the amino groups of three phylogenetically conserved guanosines (G111, G112, and G303) are important for 3' exon ligation. The amine of G22, as well as the amines of the other four guanosines within the P1 helix, are essential for ligation of the 5' exon. Previous work has shown that point mutation of either G22 or G303 to an adenosine (A) substantially reduces activity. Like inosine, adenosine lacks an N2 amino group. Interference rescue of the G22A and G303A point mutations was detected at the site of mutation by NAIM using 5'-O-(1-thio)diaminopurine riboside monophosphate (DMP alphaS), an adenosine analog that has an N2 exocyclic amine. The G22A point mutant could also be rescued by incorporation of DMP alphaS at A24. By analogy to genetics, there are interference phenotypes comparable to loss of function, reversion, and suppression. This method can be readily extended to other nucleotide analogs for the analysis of chemical groups essential to a variety of RNA and DNA activities.

New applications for biocatalysts

Biocatalysis has always been a key focus area in biotechnology and new approaches for the utilization of biocatalysts have continued to emerge over the past year. Significant progress has been made in the biocatalytic production of both synthetic and natural polymers, in the generation of novel biocatalysts using genetic and biochemical approaches or through identification of new biological sources, in the immobilization of biocatalysts and their modification with amphiphilic polymers, and in the modulation of the stereochemistry of enzymatic reactions.

Recent approaches to probe functional groups in ribonuclease P RNA by modification interference

Modification interference is a powerful method to identify important functional groups in RNA molecules. We review here recent developments of techniques to screen for chemical modifications that interfere with (i) binding of (pre-)tRNA to bacterial RNase P RNA or (ii) pre-tRNA cleavage by this ribozyme. For example, two studies have analyzed positions at which a substitution of sulfur for the pro-Rp oxygen affects tRNA binding [1] or catalysis [2]. The results emphasize the functional key role of a central core element present in all known RNase P RNA subunits. The four sulfur substitutions identified in one study [2] to inhibit the catalytic step also interfered with binding of tRNA to E. coli RNase P RNA [1]. This suggests that losses in binding energy due to the modification at these positions affect the enzyme-substrate and the enzyme-transition state complex. In addition, the two studies have revealed, for the first time, sites of direct metal ion coordination in RNase P RNA. The potentials, limitations and interpretational ambiguities of modification interference experiments as well as factors influencing their outcome are discussed.

Enzymatic RNA synthesis and RNase P. Evolutionary aspects

TransferRNA recognition was used as leit-motiv in the illustration of possible links between a hypothetical primordial RNA world and the contemporary DNA world. In an RNA world, 'proto-tRNA' could have functioned as replication origin and as primitive telomere. Possibly, this primitive structure is preserved in a 'universal substrate' for modern tRNA-specific enzymes. The combination of acceptor stem and T arm (plus a linker) was finally revealed as sufficient for the recognition by prokaryotic and eukaryotic RNase P, as well as other tRNA enzymes. In modern life forms, a tRNA-like element in viral RNAs still serves as replication origin, and furthermore, the recognition of similar structures as cryptic promoters is universally conserved for template-dependent RNA polymerases. Another common property of modern polymerases is their high, but clearly limited and condition-dependent substrate specificity. Very likely, also substrate recognition by primitive polymerases was not more stringent, and this lead to the occurrence of mixed nucleic acids as intermediates in the transition of genomic RNA to contemporary genomic DNA.