Comparison of the mechanical properties of different tension band materials and suture techniques

Suture Bridge Technique with 5-Ethibond: A Promising Approach for Infrapatellar Pole Fracture Treatment

Purpose

Infrapatellar pole fractures are challenging injuries that require appropriate treatment to ensure optimal functional outcomes. This study aimed to introduce the application of the Suture Bridge technique using the 5-Ethibond for the treatment of infrapatellar patella fracture.

Methods

Five cases of infrapatellar pole fracture that were treated at our institution between February 2020 and September 2021. The patients included one male and four females, with an average age of 66 years (range: 60-77 years). All patients were treated with the Suture Bridge technique using the 5-Ethibond to preserve the infrapatellar pole.

Results

The average operative time was 64 min (range: 50-80 min). The average blood loss during surgery was 51 mL (range: 40-60 mL). All cases demonstrated fracture healing at an average of 10 weeks (range 8-12) after surgery. The patients were followed up for an average period of 14.8 months (8-22). No wound infection or second displacement of fracture fragment was found. Full range of motion was restored in all patients within 12-14 weeks after surgery. None of the patients complained of anterior knee pain.

Conclusions

Based on the findings of the study, it appears that the Suture Bridge technique using 5-Ethibond is a promising and viable option for the treatment of infrapatellar pole fractures.

Comparison of Fixation Methods Between Transosseous Pull-Out Suture and Separate Vertical Wiring for Inferior Pole Fracture of Patella: A Systematic Review and Meta-Analysis

OBJECTIVES

To compare, in a systematic review, Krakow transosseous (KT) suturing and separate vertical wiring (VW) fixation methods in inferior pole fractures of the patella and to evaluate whether the supplementary fixation affected bone union.

METHODS

DATA SOURCES

The MEDLINE, Embase, and Cochrane databases were searched from inception to January 15, 2023. The keywords were "patella inferior pole fracture", "patella distal pole fracture", "transosseous", "pull-out suture", "reattachment", and "vertical wiring".

STUDY SELECTION

All clinical studies describing KT or VW techniques for inferior pole fracture of the patella and reporting bone union-related complications were included.

DATA EXTRACTION

This meta-analysis included 16 studies with 274 patellae. Demographic data, surgical techniques, clinical outcomes, and complication rates were recorded. The Methodological Index for Non-Randomized Studies criteria were used to assess their quality.

DATA SYNTHESIS

A meta-analysis was performed using random-effects models and meta-regression. The meta-analytic estimate of bone union-related complications was 3.8% (95% CI, 1.6%-6.0%) for either PO or VW techniques in inferior pole fractures of the patella. The bone union-related complication rates did not differ significantly between the two techniques (KT, 5.7%; VW, 3.0%; P = .277). Meanwhile, supplementation fixation was significantly associated with decrease in bone union-related complication rates ( p = .013).

CONCLUSIONS

Fixation of inferior pole fractures of the patella using either KT or VW techniques provided satisfactory and similar clinical results with minimal bone union-related complications. Supplementary fixation has a positive impact on reducing bone union-related complications in inferior pole fractures of the patella following KT and VW techniques.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Thumb metacarpophalangeal joint morphology and reconstruction of the ruptured ulnar collateral ligament

Studies on graft reconstruction techniques for ruptured thumb metacarpophalangeal (MCP) ulnar collateral ligaments (UCL) do not consider the variety of MCP joint morphology. Optimal reconstruction method for flat MCP joints is therefore unclear. Twenty-four fresh-frozen, human thumbs were tested for flexion, extension and valgus stability of the MCP joint. After resection of the UCL, four reconstruction methods, differing in the metacarpal origin and phalangeal attachment, were performed on each specimen, which were then tested again in the same way. Specimens were grouped as 'round' or 'flat' depending on morphometric parameters and group differences were analysed. In flat joints, only the non-anatomical Glickel reconstruction and a modified Fairhurst reconstruction maintained normal mobility and stability. In round joints, only the Glickel reconstruction maintained normal mobility and stability. The original Fairhurst method and a modification with the origin palmar in the metacarpus were disadvantageous in both flat and round joints.

Clinical application of Kirschner wires combined with 5-Ethibond fixation for patella fractures

Background

Patella fractures that require surgery are conventionally treated using Kirschner wires (K-wires) and stainless steel wires. In recent years, the nonabsorbable polyester has been reported to have excellent outcomes clinically. Therefore, the goal of our study was to evaluate the effects of Kirschner wires combined with 5-Ethibond on treating patellar fractures.

Methods

From July 2018 to January 2022, 22 patella fracture patients were treated with Kirschner wires combined with 5-Ethibond. Radiographs of the knees were used to evaluate fracture healing and hardware complications. The clinical results were evaluated through the functional score, knee joint range of motion (ROM), and Bostman patella fracture functional score.

Results

The average age of patients was 57.4 ± 11.9 (range 33-74) years. The mean follow-up time was 15.2 ± 7.6 (range 4-36) months. The mean operation time was 56.8 ± 8.7 (range 45-80) min. The entire patients had bony union at an average of 10.5 ± 1.9 (range 8-14) weeks. At the final follow-up, the mean range of postoperative ROM was 123.4° ± 14.6° (range 95°-140°), and the functional score was 28.7 ± 1.2 (range 26-30) points. No patient exhibited internal fixation failure, and no symptomatic implants or skin complications were recorded.

Conclusions

The fixation approach using K-wires combined with 5-Ethibond has a lower complication rate and delivers superior clinical results. This research reveals that such technology is a safe and prospective substitute for conventional metal fixation approaches.

The clinical outcomes and complications of combined fixation with cannulated screws and the modified Pyrford technique for the treatment of transverse patellar fractures: a case series study

Background

Transverse patellar fractures can be fixed using various techniques. The purpose of the current study was to assess the clinical outcomes and complication rate of a combined fixation technique using cannulated screws and the modified Pyrford technique with nonabsorbable polyester sutures.

Methods and patients

Between January 2015 and February 2021, 26 transverse patellar fractures were fixed with this combined technique. Preoperative data were collected from patients with transverse patellar fractures who were followed up for at least 12 months. At each follow-up visit, plain radiographs were taken. At the 12-month postoperative follow-up, range of motion of the affected knee joint and clinical outcomes, as evaluated by the Bostman scoring system, were recorded.

Results

The average Bostman score at the 12-month postoperative follow-up was 28.3 ± 1.5. Furthermore, the average extension and flexion of the knee joint were 1.2 ± 2.1 and 125.6 ± 6.7 degrees, respectively. One patient experienced delayed bone union and one experienced superficial wound infection. There were no other postoperative complications. One patient required removal of the device for social-psychological reasons.

Conclusions

The combined fixation technique with cannulated screws and the modified Pyrford technique with suture materials produced excellent clinical outcomes and a low rate of complications in the treatment of transverse patellar fractures.

Treatment of inferior pole patella fracture using Krackow suturing combined with the suture bridge technique

PURPOSE

To evaluate the feasibility and clinical effect of Krackow suturing combined with the suture bridge technique for the treatment of acute inferior pole patella fracture.

METHODS

In this study, 18 patients with acute inferior pole patella fracture who received treatment using Krackow suturing combined with the suture bridge technique between January 2019 and March 2020 were retrospectively reviewed. There were 10 men and 8 women, with an average age of 50.1 years (range 24-69 years). X-ray examinations were performed to assess fracture healing and the Insall-Salvati index. The clinical effect was measured by the range of motion of the knee joint and the Böstman scale.

RESULTS

Patients were followed up for 13-26 months, with an average follow-up period of 19.6 months. X-ray indicated that fracture union had occurred in all patients by 10.1 weeks after surgery on average (range 8-14 weeks). The mean Insall-Salvati index immediately after surgery and at the final follow-up was 0.98 ± 0.07 and 0.90 ± 0.22, respectively (P > 0.05). At the last follow-up, the mean flexion and extension ranges for the knee joint were 135.8° ± 8.8° and - 2.8° ± 3.9°, respectively, and the mean Böstman scale was 28.9 ± 1.1 points. Functional recovery was excellent in 17 patients and good in one patient, resulting in an overall good/excellent recovery rate of 100%.

CONCLUSIONS

Our results indicated that Krackow suturing combined with the suture bridge technique can achieve stable fracture fixation, provides good clinical outcomes in the treatment of acute inferior pole patella fracture, and is worthy of clinical application.

Extensor mechanism ruptures

Native patellar tendon injuries are seen in younger patients compared to quadriceps tendon ruptures.

Up to a third of the patients may have local (antecedent tendinopathy and cortisone injections) or systemic risk factors (obesity, diabetes, hyperparathyroidism, chronic renal failure, fluoroquinolone or statin use) of injury, these are more frequent in bilateral disruptions.

Complete extensor mechanism disruptions should be repaired surgically. Although isolated primary repair has been reported to have good outcomes in younger patients with acute tears and good tendon quality, augmentation of the repair with autograft, allograft or synthetic material should be considered in patients with poor tendon quality, chronic tears or tendon defects.

High rates of return to work/sports have been reported in native patellar and quadriceps tendon tears, with re-rupture rates <5%.

Extensor mechanism disruptions in patients with a total knee arthroplasty are challenging due to older age, systemic co-morbidities and poor local conditions, resulting in inferior outcomes compared to native extensor mechanism injuries. Some form of augmentation with autograft, allograft or synthetics is advisable in all cases. Salvage procedures such as whole extensor mechanism allografts provide acceptable outcomes in multiply operated knees with extensive bone and soft tissue deficits.

"Management of recurrent temporomandibular dislocation using orthodontic traction screws."

Temporomandibular joint dislocation is defined as the loss of joint congruency between the mandibular condyle and the glenoid fossa of the temporal bone. Multiple therapeutic options have been proposed for the treatment of recurrent TMJ dislocation. The aim of this paper is to present two recently treated cases with a modification of Wolford's technique, replacing the Mitek anchors with orthodontic screws. Case series: The first case concerns a 36 year-old women with recurrent temporomandibular dislocation, and the second one a 26 year-old patient with the same diagnosis. In both cases, one 8mm orthodontic screw was placed in the lateral pole of mandibular condyle, sutured with PremiCron® 2/0 to a hole made in the root of each zygomatic arch. At twelve-month follow-up (first patient) and at six-month follow-up (second patient), patients had not presented new episodes of mandibular dislocation and mouth opening range remained stable. This technique can be considered as an alternative to Wolford's technique in treating recurrent temporomandibular dislocation when conservative management fails.

Olecranon fractures in children: treatment of a rare entity

BACKGROUND

Olecranon fractures are a rare entity in children. The classification and treatment strategies are still discussed controversially.

METHODS

A retrospective chart review of all patients < 17 years admitted with an olecranon fracture at a Level I Trauma Center between 2005 and 2017 has been performed. 46 subjects were included. For classification of olecranon fractures in children the AO Pediatric Comprehensive Classification of Long Bone Fractures (AO-PCCF) was used. Fractures were classified along the fracture line, dislocation, joint involvement and affection of the apophysis. For statistical analysis, a comparison of two groups was performed using Student t test. One-way ANOVA and Tukey's multiple comparison test was used to identify differences between more than two groups. For all analysis p ≤ 0.05 was considered statistically significant.

RESULTS

The mean age of the children was 8.5 years (2-16 years). Most children were treated with a conservative therapy (n = 29, 63.0%). 17 patients (36.9%) underwent osteosynthesis (plate or tension band wiring) of which three were initially treated with a conservative therapeutic approach. Children with operative treatment were significantly older compared to children treated conservatively. Interestingly, all patients with luxation were characterized by an oblique fracture line, one of them extraarticular, three intraarticular.

CONCLUSION

Taken together, this study analyzed one of the largest selections of pediatric patients with olecranon fracture in regard to fracture type and treatment strategy. Based on the assumption that treatment strategies follow a fracture classification, a consistent classification method is needed which should take into account fracture morphology and localization, as considered by the AO-PCCF, and the dislocation as measured by Braque. Surgical treatment is needed in case of dislocation ≥ 5 mm, intra-articular fractures, instable fracture conditions caused by the fracture line, open fractures and the affection of the apophysis. Otherwise, the conservative treatment shows insufficient results in the elbow mobility. The reliable choice of treatments based on our classification was mirrored by the very low rate of conversion of treatment strategies.

LEVEL OF EVIDENCE

Level III-retrospective comparative study.

Olecranon mayo IIA fractures treated with transosseous high strength suture: A series of 29 cases

BACKGROUND

The aim of this study is to assess the causes and rates of re-operation in olecranon fractures in adults treated with transosseous suture.

METHODS

We prospectively recruited 29 patients who were treated with this technique between 2010 and 2018. The type of suture used, tourniquet time and surgical time were analyzed for each one. X-rays were taken after 2 weeks, 6 weeks and 6 months, recording complications, causes, rates of re-operation and the final clinical condition.

RESULTS

Median time for ischemia and surgery were 51 (95% CI:48;62) and 45 (95% CI:42;55) minutes respectively. The radiologic studies showed diastasis of the posterior cortex in the X-rays taken after 2 weeks and after 6 weeks in 7 (24,1%) cases. Of these cases, two (6,8%) were no longer followed-up after 6 months. There was only one case of aseptic non-union. Among these cases, two patients (6.8%) required surgical debridement due to acute soft tissue infection. No complication had any clinical impact, maintaining all patients full range of motion and no pain. Osteosynthesis removal was not necessary in any case.

CONCLUSION

Transosseous suture with high strength thread is a valid alternative for treating Mayo IIA olecranon fractures in adult patients, decreasing re-operation rates for implant removal. There may be, in a moderate percentage of cases, radiologic diastasis of the posterior cortex at the fracture site, without causing pain nor limiting mobility LEVEL OF EVIDENCE: III.

Biomechanical Properties and Biocompatibility of a Non-Absorbable Elastic Thread

To date, extensive studies have been conducted to assess diverse types of sutures. But there is a paucity of data regarding biomechanical properties of commonly used suture materials. In the current experiment, we compared biomechanical properties and biocompatibility, such as tensile strength and elongation, the degree of bovine serum albumin (BSA) release, in vitro cytotoxicity and ex vivo frictional properties, between a non-absorbable elastic thread (NAT; HansBiomed Co. Ltd., Seoul, Korea) (NAT-R: NAT with a rough surface, NAT-S: NAT with a smooth surface) and the Elasticum® (Korpo SRL, Genova, Italy). The degree of tensile strength and elongation of Si threads was significantly higher in both the NAT-R and -S as compared with the Elasticum® (p < 0.05). Moreover, the degree of tensile strength and elongation of PET threads was significantly lower in both NAT-R and -S as compared with the Elasticum® (p < 0.05). Furthermore, the degree of tensile strength and elongation of braided Si/PET threads was significantly lower in NAT-S as compared with NAT-R and Elasticum® (p < 0.05). The degree of BSA release was significantly higher in the NAT-R as compared with Elasticum® and NAT-S throughout a 2-h period in the descending order (p < 0.05). The degree of cell viability was significantly higher in both NAT-R and -S as compared with Elasticum® (p < 0.05). The degree of coefficient of friction as well as the frictional force and strength was significantly higher in NAT-R as compared with NAT-S and Elasticum® (p < 0.05). NAT had a higher degree of biomechanical properties and biocompatibility as compared with Elasticum®. But further experimental and clinical studies are warranted to compare the efficacy, safety, and potential role as a carrier for drug delivery between NAT and Elasticum®.

Biomechanical evaluation of patellar tendon repair using Krackow suture technique

Background

Patellar tendon rupture is a potentially devastating injury. Surgical repair is the primary treatment recommended for the patients with patellar tendon ruptures. Given the tendon properties, the suture technique is critical for proper tissue repair. Providing adequate loading during early mobilization is essential to prevent tendon suture repair failure. Therefore, the current study evaluated the mechanical characteristics of various applied loadings on patellar tendon repair using Krackow suture via a porcine model.

Methods

Twelve fresh porcine hindlimbs with patellar tendon rupture were repaired by Krackow method using synthetic and non-absorbable No. 5 Ethibond sutures. Loadings of 100 and 200 N were applied during the cyclic loading test. A three-dimensional optical motion capture system was used to record the gap formation at the initial, 50th, 100th, 150th, 200th, 250th, 500th, 750th, and 1000th cycle. After cyclic loading, the specimen was loaded to failure under displacement control at a rate of 1 mm/s.

Results

Suture breakage was the primary failure mode in both loading conditions. After 1000 cyclic loadings of 100 N, the ultimate failure strength was 243.6 ± 25.8 N. However, the specimens tested under 200 N of loading failed before reaching 200 cycles. Under the 100 N loading, the largest gap deformation (1.89 ± 0.23 mm) and residual deformation (0.213 ± 0.183 mm) were found in the initial cycle. The average cumulative displacement was 5.13 mm from the initial cycle to the 100th cycle and 4.5 mm from the 250th to the 1000th cycle.

Conclusions

Our findings can serve as reference values for further comparisons with various repair techniques or materials. This study suggests that the initially applied load after patellar tendon repair is an important risk factor of re-rupture.

Biomechanics of Prophylactic Tethering for Proximal Junctional Kyphosis: Characterization of Spinous Process Tether Pretensioning and Pull-Out Force

STUDY DESIGN

Biomechanical evaluation of cadaver functional spinal units (FSUs).

OBJECTIVES

Demonstrate the effect of increasing spinous process (SP) tether pretension on FSU flexion range of motion (ROM), intervertebral disc (IVD) pressure, and SP force. Quantify SP tether pull-out forces and relate them to SP forces generated at maximum flexion.

SUMMARY OF BACKGROUND DATA

There has been recent interest in the use of SP tethering for prophylactic treatment of proximal junctional kyphosis (PJK). There is currently no consensus on standard tethering technique and no biomechanical data on the effect of tether pretension.

METHODS

Nine T11-T12 FSUs were tested to 5 Nm of flexion-extension bending. A strain gauge was applied at the base of the T11 SP to measure force. Two custom pressure sensors were inserted into the anterior and posterior thirds of the IVD. Motion kinematics were measured by a motion capture system. An untethered test was done to describe baseline behavior. A 5-mm polyester tether was looped through holes drilled at the base of each SP and pretensioned to five different pretensions ranging from 0 to 88 N. Following ROM testing, specimens were dissected into individual vertebra and then SP pull-out testing was done at each level.

RESULTS

Increasing pretension significantly reduced flexion ROM, reduced IVD pressures, and increased SP force. All pretensions, including the minimum, significantly reduced flexion ROM. SP pull-out forces were significantly greater than SP forces generated at maximum flexion.

CONCLUSIONS

Tether pretension significantly affects segmental FSU biomechanics. Pretension should be considered an integral factor in the overall success of a tethering strategy. Efforts should be made to control and record pretension intraoperatively.

LEVEL OF EVIDENCE

Level V, biomechanical study.

Biomechanics of Prophylactic Tethering for Proximal Junctional Kyphosis: Comparison of Posterior Tether Looping Techniques

STUDY DESIGN

Biomechanical study.

OBJECTIVES

Compare effects of four spinous process (SP) tether looping methods on segmental flexion range of motion (ROM), intervertebral disc (IVD) pressures, and peak tether forces.

SUMMARY OF BACKGROUND DATA

SP tethering has been gaining interest as a prophylactic technique to prevent PJK caused by ligamentous laxity in ASD corrective surgery. Several SP tether looping methods have been proposed; however, there is no consensus on appropriate technique. No study has investigated the effect of the tether looping method on segmental biomechanics.

METHODS

Nine T1-T4 cadaveric motion segments were tested to 5 Nm of flexion-extension. The uppermost instrumented vertebra (UIV) was located at T3 using standard pedicle screws and fusion rods. A crosslink (CL) was placed inferior to the pedicle screws. A 5-mm polyester tether was looped under the CL at UIV and through holes drilled at the base of UIV + 1 and UIV + 2 SPs. Biomechanical measurements included flexion ROM, IVD pressure, and peak tether forces at UIV/UIV + 1 and UIV + 1/UIV + 2. An untethered test was used for baseline values. Tethered tests included one single-level (SL) method and three double-level (DL) methods: common (CM), chained (CH), and figure-8 (F8).

RESULTS

SL yielded significant reductions in flexion ROM at UIV/UIV + 1 (p = .001) and in IVD pressure at UIV/UIV + 1 (p = .007). Choice of DL method had a significant effect on flexion ROM at UIV/UIV + 1 (p = .004) but not at UIV + 1/UIV + 2 (p = .14). Choice of DL method also had a significant effect on IVD pressure at UIV/UIV + 1 (p < .001) but not at UIV + 1/UIV + 2 (p = .311). CM produced the greatest reductions in flexion ROM and IVD pressure, with the lowest peak tether forces among the DL methods.

CONCLUSION

Tether looping method significantly alters segmental biomechanics. Tethering with the CM method to UIV + 2 allows for reductions in loads acting on the UIV + 1 SP and posterior ligaments.

LEVEL OF EVIDENCE

Level V, biomechanical study.

Olecranon fractures in children and adolescents: outcomes based on fracture fixation

PURPOSE

Open reduction and internal fixation with a tension band construct is the standard treatment for displaced transverse intra-articular olecranon fractures. The purpose of this study is to describe the outcomes of tension band fixation of olecranon fractures in children, specifically assessing the need for revision fixation and hardware removal.

METHODS

Patients less than 18 years of age diagnosed with a displaced transverse intra-articular olecranon fracture and treated with tension band fixation between 2008 and 2017 were retrospectively enrolled. Operative treatment was with tension band wire (TBW) or tension band suture (TBS) constructs.

RESULTS

A total of 46 patients, 36 male and ten female with a mean age of 12.3 years (6 to 17), were included. Surgical fixation was with TBW in 17 patients and TBS in 29 patients. Revision fixation due to failure and fracture displacement was required in 6% of the TBW group and 14% of the TBS group (p = 0.19). The patients who required revision fixation in the TBS group were older (14.7 years versus 11.6 years, p = 0.05) and heavier (70.5 kg versus 48.5 kg, p = 0.05) than those in the same group who did not require revision fixation.

CONCLUSION

Paediatric olecranon fractures treated with TBW or TBS fixation unite in the majority of patients with similar need for hardware removal due to prominence and/or pain between fixation techniques. In a select group of older patients weighing greater than 50 kg, TBS constructs demonstrate increased failure rates, requiring revision fixation, and should be avoided in this population group.

LEVEL OF EVIDENCE

IV.

Can tape-screw fixation of a quadrupled semitendinosus graft in a full-length tibial tunnel provide superior fixation compared with a doubled semitendinosus-gracilis held with an interference screw? A matched-pair cadaveric biomechanical comparison

Background

In anterior cruciate ligament reconstruction, quadrupled semitendinosus (Quad ST) grafts have potential advantages over doubled semitendinosus–gracilis (ST/G) including larger diameter and gracilis preservation, however the ideal tibial fixation method of the resultant shorter Quad ST graft remains elusive if a fixed-loop suspensory fixation device is used on the femur. We investigated whether the tibial fixation biomechanical properties of a Quad ST fixed indirectly with polyethylene terephthalate tape tied over a screw in a full outside-in created tunnel was superior to a ST/G graft fixed with an interference screw.

Materials and methods

In a controlled laboratory study, six cadaveric matched pairs of each construct were subjected to cyclic loading to mimic physiologic loading during rehabilitation. This included preconditioning cycling, cyclic loading to 220 N for 500 cycles, then cyclic loading to 500 N for 500 cycles.

Results

High standard deviations across the measured parameters occurred with no significant difference between measured parameters of elongation for the different constructs. Elongation of the Quad-ST construct was greater at 10 and 100 cycles, but not statistically different. Four of the six Quad-ST constructs failed below 100 cycles, compared with two failures below 100 cycles in the ST/G construct. There was a strong correlation between cycles to failure and bone mineral density for the Quad ST-tape constructs.

Conclusions

Tibial fixation of Quad ST with a tied tape–screw construct in a full-length tunnel was not biomechanically superior to ST/G graft fixed with an interference screw, exhibited greater nonsignificant construct elongation with earlier failure, and was more reliant on bone mineral density.

Level of evidence

In vitro laboratory study.

Early range of motion exercise in pediatric patients with olecranon fractures treated with tension band suture with double loops and double knots

BACKGROUND

Pediatric patients with olecranon fractures are uncommon. The tension band suture technique was introduced to reduce the burden of implant removal and other complications. However, to our knowledge, early range of motion (ROM) exercise has not been introduced in this population of patients. Double Vicryl loops and knots with 2 cross-pins are used to maintain the benefits of the tension band suture technique and to enhance fixation tensile strength. We believe that early ROM exercises could be achieved without nonunion or fixation failure.

METHODS

Twelve pediatric patients with olecranon fractures were treated with tension band suture with double loops and knots between 2004 and 2015. Vicryl No. 1 was used for wiring. ROM exercises were initiated 1 week postoperatively with a customized functional brace. Early functional outcomes were evaluated by the Mayo Elbow Performance Score at every visit after 8 weeks postoperatively.

RESULTS

Nine boys and 3 girls (average age, 10.6 years; range, 5 years 7 months-16 years 2 months) were included in the study. Initial displacement and angulation of the fractures were 5 mm (2-7 mm) and 12° (4°-25°), respectively. Two cases had radial neck fractures of the ipsilateral elbow. All patients had a perfect Mayo Elbow Performance Score after 8 weeks postoperatively. Pin removals were performed at 13.1 weeks. No complications, including growth arrest, were observed.

DISCUSSION/CONCLUSION

Tension band suture with double loops and knots, combined with early ROM exercise, may be a complete alternative to tension band wiring.

Os acromiale fixation: a biomechanical comparison of polyethylene suture versus stainless steel wire tension band

BACKGROUND

Symptomatic hardware is a commonly reported complication after surgical fixation of an unstable meso-type os acromiale. This study compared the biomechanical properties of a cannulated screw tension band construct using a metal wire tension band vs. a suture tension band, considering that the suture construct could allow for decreased hardware burden in the clinical setting.

METHODS

A meso-type os acromiale was created in 16 cadaveric shoulders. Two cannulated 4-mm screws were placed in each specimen. Tension band augmentation was accomplished with a 1-mm stainless steel wire (wire group) or a #5 braided polyethylene suture (suture group), with 8 specimens in each group. An inferiorly directed force was applied to the anterior acromion at 1 mm/s on a materials testing machine. Stiffness and ultimate failure load were recorded and analyzed.

RESULTS

No significant difference (P = .22) was observed in the ultimate failure load between the wire (228  ± 85 N; range, 114-397 N) and the suture (275 ± 139 N; range, 112-530 N). No significant difference (P = .17) was observed in the stiffness between the wire (28  ± 12 N/mm; range, 18-53 N/mm) and the suture (38  ± 25 N/mm; range, 10-83 N/mm).

CONCLUSIONS

Stainless steel wire and polyethylene suture have similar biomechanical strength in the cannulated screw tension band fixation of meso-type os acromiale at time zero.

Management of comminuted patellar fracture with non-absorbable suture cerclage and Nitinol patellar concentrator

PURPOSE

To evaluate the effectiveness and safety of a fixation technique for comminuted patellar fracture using non-absorbable suture cerclage and nickel-titanium patellar concentrator (Ni-Ti PC).

METHODS

Twenty-nine consecutive patients with displaced comminuted patellar fractures accepted internal fixation procedure using Ni-Ti PC augmented with different types of non-absorbable suture cerclage. During follow-up, the clinical grading scales of Böstman, including range of movement, pain, work, atrophy, assistance in walking, effusion, giving way, and stair-climbing, were used to evaluate the clinical results. Complications including implant loosening, fragment displacement, bone nonunion, infection, breakage of the implants, painful hardware, and post-traumatic osteoarthritis were also assessed.

RESULTS

Patients were followed up for a mean period of 27 months. The bone union radiographically occurred approximately 2.5 months without implant loosening and fragment displacement. According to Böstman method, satisfactory results were obtained, and the mean score at final follow-up was 28 (range 20–30) points. Twenty-two patients with excellent results had mean score of 29.8 ± 0.5 (range 28–30) and seven patients with good results had mean score of 22.7 ± 3.14 (range 20–27). No postoperative complications, such as infection, dislocation, breakage of the implants, painful hardware, and post-traumatic osteoarthritis, were observed.

CONCLUSION

Ni-Ti PC fixation with non-absorbable suture cerclage is a feasible approach for comminuted patellar fractures. Firm fixation with this technique resulted in satisfactory outcomes without obvious complications.

An alternative patellar fracture fixation: a biomechanical study

OBJECTIVES

The purpose of this study is to compare open reduction and internal fixation of the patella with a locking plate and tension-band construct (PF) versus cannulated screws and tension-band fixation (SF). The hypothesis is that both constructs will have similar failure loads with simulated extension loading.

METHODS

Transverse patellar fractures were created in 10 cadaveric pairs of legs and were fixed with either PF or SF. Dual-energy X-ray Absorptiometry (DXA) scans of all calcanei measured bone mineral density (BMD). Using an MTS 810 servohydraulic testing machine, each leg cycled to full extension 10 times before loading to failure. A differential variable reluctance transducer measured the distraction of the patella. Data were analyzed using paired t test analysis and bivariate analysis for Pearson correlation coefficients.

RESULTS

There was no difference in the BMD between the PF and the SF groups (P = 0.367). No measurable differences occurred during the 10 cycles, and load at clinical failure was not significantly different between the 2 fixation groups (P = 0.38). Stiffness during the final loading cycle was significantly higher for the SF group (P = 0.008). Ultimate strength of fixation was significantly higher in PF group (P = 0.048). BMD was not correlated to the ultimate strength of SF (P = 0.112), but was correlated for PF (P = 0.025).

CONCLUSIONS

Based on our results, PF provides comparable strength to SF, and it seems to be a safe and effective alternative to the current gold standard.

Analysis of a knotless flexor tendon repair using a multifilament stainless steel cable-crimp system

PURPOSE

To compare the biomechanical and technical properties of flexor tendon repairs using a 4-strand cruciate FiberWire (FW) repair and a 2-strand multifilament stainless steel (MFSS) single cross-lock cable-crimp system.

METHODS

Eight tests were conducted for each type of repair using cadaver hand flexor digitorum profundus tendons. We measured the required surgical exposure, repair time, and force of flexion (friction) with a custom motor system with an inline load cell and measured ultimate tensile strength (UTS) and 2-mm gap force on a servo-hydraulic testing machine.

RESULTS

Repair time averaged less than 7 minutes for the 2-strand MFSS cable crimp repairs and 12 minutes for the FW repairs. The FW repair was performed with 2 cm of exposure and removal of the C-1 and A-3 pulleys. The C-1 and A-3 pulleys were retained in each of the MFSS cable crimp repairs with less than 1 cm of exposure. Following the FW repair, the average increase in friction was 89% compared with an average of 53% for the MFSS repairs. Six of the 8 MFSS specimens achieved the UTS before any gap had occurred, whereas all of the FW repairs had more than 2 mm of gap before the UTS, indicating that the MFSS was a stiffer repair. The average UTS appeared similar for both groups.

CONCLUSIONS

We describe a 2-strand multifilament stainless steel single cross-lock cable crimp flexor repair system. In our studies of this cable crimp system, we found that surgical exposure, average repair times, and friction were reduced compared to the traditional 4-strand cruciate FW repair. While demonstrating these benefits, the crimp repair also produced a stiff construct and high UTS and 2-mm gap force.

CLINICAL RELEVANCE

A cable crimp flexor tendon repair may offer an attractive alternative to current repair methods. The benefits may be important especially for flexor tendon repair in zone 2 or for the repair of multiple tendons.

Double fixation of displaced patella fractures using bioabsorbable cannulated lag screws and braided polyester suture tension bands

PURPOSE

To evaluate the effectiveness and safety of a new double fixation technique for displaced patellar fractures using bioabsorbable cannulated lag screws and braided polyester suture tension bands.

METHODS

Fifteen patients (mean age of 46.2 years) with displaced transverse or comminuted patella fractures were enrolled in this prospective study. All of the patients were treated via the open reduction internal fixation (ORIF) procedure using bioabsorbable cannulated lag screws and braided polyester suture tension bands. The patients were followed post-surgery to evaluate (1) the time required for radiographic bone union, (2) the knee joint range of motion at the time of radiographic bone union, (3) the degree of pain assessed using the visual analogue scale (VAS), (4) the function of the knee using the Lysholm score and (5) the presence of any additional complications from the surgery.

RESULTS

All of the patients were followed post-treatment for more than 1 year (range, 12-19 months; mean post-treatment follow up time, 14 months). The bone union of the fractures as seen radiographically occurred approximately 3 months from surgery in all cases without implant failure or redisplacement of the fractured site. The mean knee joint range of motion was from 0 to 134.6°, and the mean VAS score was 0.7 at the time of bone union. The mean Lysholm scores at the time of bone union and 12 months post-surgery were 86.7 and 95.7, respectively. No postoperative complications, such as infection, dislocation or breakage of the implants, were observed. Moreover, all of the patients returned to their previous activity level.

CONCLUSION

This new double fixation technique using bioabsorbable cannulated lag screws and braided polyester suture tension bands resulted in satisfactory outcomes for patella fractures without any obvious complications.

A biomechanical comparison of patellar tendon repair materials in a bovine model

We evaluated the biomechanical properties of FiberWire (Arthrex, Inc, Naples, Florida), a new suture material, for both repair and augmentation as compared to standard Ethibond suture (Ethicon, Inc, Somerville, New Jersey), hypothesizing that primary repair and cerclage augmentation with the new suture material would have similar biomechanical properties as a standard repair with wire augmentation. Forty-five fresh bovine knees were placed in 3 groups of equal size: (1) #5 Ethibond tendon repair plus 18-gauge wire augmentation; (2) #5 FiberWire repair plus #5 FiberWire augmentation; and (3) #5 Ethibond repair plus #5 FiberWire augmentation. A straight static pullout test was performed, randomly alternating between the different groups. Gap formation was measured at the center of the repair by a metric ruler, with the examiner blinded to the developing force-tension readout. For each millimeter of gap formation (1-10 mm), the force on the repair was recorded, as well as the force at the ultimate failure of the repair, designated by breakage of any repair material. Analysis showed no significant difference between the standard Ethibond/wire repair and the FiberWire/FiberWire repair. The Ethibond/FiberWire repair was shown to be significantly weaker than the other 2 groups. Ultimate failure data indicated that the Ethibond/wire repair was significantly stronger than both other groups. No significant differences were found between the FiberWire/FiberWire repair and the Ethibond/FiberWire repair. Newer, stronger suture material for both primary repair and augmentation may provide equivalent biomechanical strength at clinically significant levels.

The use of three types of suture and stainless steel wire tension banding for the fixation of simulated olecranon fractures

Using an osteotomy of the olecranon as a model of a transverse fracture in 22 cadaver elbows we determined the ability of three different types of suture and stainless steel wire to maintain reduction when using a tension-band technique to stabilise the bone. Physiological cyclical loading simulating passive elbow movement (15 N) and using the arms to push up from a chair (450 N) were applied using an Instron materials testing machine whilst monitoring the osteotomy site with a video extensometer. Each osteotomy was repaired by one of four materials, namely, Stainless Steel Wire (7), No 2 Ethibond (3), No 5 Ethibond (5), or No 2 FiberWire (7).

There were no failures (movement of > 2 mm) with stainless steel wire or FiberWire and no significant difference in the movements measured across the site of the osteotomy (p = 0.99). The No. 2 Ethibond failed at 450 N and two of the five of No. 5 Ethibond sutures had a separation of > 2 mm at 450 N.

FiberWire as the tension band in this model held the reduction as effectively as stainless steel wire and may reduce the incidence of discomfort from the hardware. On the basis of our findings we suggest that a clinical trial should be undertaken

Universal Clamp system in thoracolumbar spinal fixation: technical note

BACKGROUND

The Universal Clamp is a polyester band passed under the lamina and connected to a rod by a titanium clamp that has been recently reported as an alternative for replacing screws and hooks for thoracolumbar spinal diseases. To date, there is no report of an evaluation of the effectiveness and safety of posterior fixation and fusion using this technique.

METHODS

This study was a prospective evaluation of a cohort of 18 patients with thoracolumbar disorders that were surgically treated between November 2006 and June 2007 with Universal Clamps for spinal fixation. Fifteen cases were traumatic fractures with others two with degenerative severe stenosis and one kyphotic stenosis. Levels treated were thoracolumbar in 15 cases, thoracic in two cases, and lumbar in one case. Seventeen patients underwent correction and instrumentation using a hybrid construct of screws and clamps, while one patient underwent fixation using Universal Clamps only. Intraoperative evoked potentials were monitored in all cases. One patient had infection that resolved after antibiotic therapy without implant removal. No neurological adverse event was seen. There was no rod breakage or clamp loosening during a follow-up of 12 months.

CONCLUSIONS

The polyester band is soft and flexible, and the anterior-posterior spinal canal space occupied by the band is less than by sublaminar wire steel cable, thus avoiding direct spinal cord trauma during sublaminar passage. The flat configuration of the cable distributes the load over a larger contact area under the lamina compared to metal wires without producing imaging artefacts in postoperative imaging. This preliminary report demonstrates the efficacy and safety of this technique for the stabilization of thoracolumbar spinal disorders.

Tension band fixation for treatment of patellar fracture: novel technique using a braided polyblend sutures and ring pins

AIM

To evaluate a new tension band fixation technique for patellar fracture using braided polyblend sutures (PBSs) and ring pins (RPs).

METHODS

A total of 13 patients (average: 58.2 years) with transverse or comminuted patellar fractures were treated by this technique. From the 4th week after the surgery, normal activities of daily living were permissible.

RESULTS

Bone union was achieved at a mean 3 months from surgery, without any cases of failure, redislocation or postoperative complication. At 12 months after surgery, mean Lysholm score was 93.6, knee motion was extension 0.8 degrees to flexion of 134.6 degrees and visual analogue pain score was 0.5.

CONCLUSION

The new tension band fixation technique using braided polyblend sutures resulted in good outcomes and is considered clinically effective for patellar fracture reduction.

Olecranon fractures

Several options exist for the management olecranon fractures. These include tension band, plate and intramedullary fixation techniques as well as fragment excision with triceps advancement and non-operative management. No one technique is suitable for the management of all olecranon fractures. In deciding how to treat this common trauma presentation, the surgeon needs a good understanding of the anatomy, different fracture morphologies, surgical options and potential complications. With appropriate management and early mobilisation good functional results can be expected in the majority of patients.

Distal tunnel placement improves scaphoid flexion with the Brunelli tenodesis procedure for scapholunate dissociation

PURPOSE

Treatment of scapholunate dissociation remains difficult. The modified Brunelli procedure, a flexor carpi radialis tenodesis through the scaphoid and secured with dorsal wrist ligaments, has shown promising results. This study compares the biomechanical effects on scaphoid flexion and scapholunate gap between proximal and distal tunnel placement in the modified Brunelli procedure.

METHODS

Eight fresh-frozen cadaveric forearms were used. A dorsal approach to the wrist through the floor of the fourth compartment was used. Metallic markers were implanted into the scaphoid and lunate. Tunnels were drilled through the proximal and distal poles of the scaphoid. Wrists were positioned in neutral and loaded to 100 N through the wrist flexor and extensor tendons. Posteroanterior and lateral radiographs were taken with the scapholunate interval intact, with the scapholunate interval sectioned, and after the modified Brunelli tenodesis was performed through the proximal and then distal tunnels using Mersilene tape. Radiographs were analyzed for change in scapholunate angle and scapholunate gap. Multivariate analysis of variance was performed to assess statistical significance for each state compared with the intact wrist.

RESULTS

In the intact wrist, the mean scapholunate gap was 1.6 mm +/- 0.1. With the scapholunate interval sectioned, the scapholunate angle increased by 26 degrees +/- 12 and gap increased to 4.2 mm +/- 1.2. With a proximal tunnel for the modified Brunelli procedure, the change in scapholunate angle decreased to 15 degrees +/- 10 and gap decreased to 1.8 mm +/- 0.3. With a distal tunnel for the modified Brunelli procedure, the change in scapholunate angle decreased to 4 degrees +/- 7 and gap decreased to 1.3 mm +/- 0.2.

CONCLUSIONS

These biomechanical data suggest that a tunnel exiting in the distal pole of the scaphoid results in better correction of scaphoid flexion when performing the modified Brunelli procedure.

Displaced olecranon fractures in children: a biomechanical analysis of fixation methods

BACKGROUND

Wire and suture methods have been used to stabilize pediatric olecranon fractures. This study (1) compared differences in simulated intraoperative compression during fracture reduction, (2) evaluated articular surface compression during cyclic loading of the tension band, and (3) compared fracture stabilization after cyclic physiologic loading at low/high levels.

METHODS

Identical olecranon fractures were created in 10 synthetic ulnae and randomized to suture or wire fixation. Compression after fixation and compression during cyclic loading between 10 and 50 N was measured with a load cell at the articular surface and compared with a 1-way analysis of variance (p < 0.05). Twenty-four fractured synthetic ulna were randomly assigned to wire or suture tension band constructs and low- or high-loading groups. The low-load group (12 ulnae) cycled loading from 3 to 10 N for 100 cycles followed by a failure test. The high-load group (12 ulnae) experienced 10 to 100 N before failure testing. Fracture separation (mm) and failure load (N) were compared using a 2-way analysis of variance (p < 0.05). Ten synthetic ulnae were randomized to wire/suture groups and cyclically loaded between 10 to 50 N while measuring loads across the fracture using a load cell. Correlation data were statistically compared with a Fisher transformation and z test (p < 0.05).

RESULTS

Residual compression was statistically greater for wire compared with suture. There was no difference in fracture displacement between groups during low loads. Suture had significantly greater displacement compared with wire at high loads. Failure loads were significantly greater for wire at both load settings. Wires transmitted forces across the joint surface more readily than sutures.

CONCLUSIONS

Suture tension bands had lower ultimate failure loads and less compression at the fracture site. However, if low loads are expected or if the fracture is reduced easily, the suture tension band may be an appropriate alternative to wire fixation.

CLINICAL RELEVANCE

Perhaps, in small children or when using casts in bigger children, a bioabsorbable suture may be used for fracture stabilization avoiding the need for extensive surgery to remove the fixation material.

A new and effective tension-band braided polyester suture technique for transverse patellar fracture fixation

OBJECTIVES

Concerning the tension-band principle of internal fixation, this study aims to establish whether any difference in interfragmentary gap exists after bone-reducing forceps are released, when a recommended suture-knot technique and a new technique are tested in vitro on a purpose built machine that features a model of a transverse fracture of the patella. In addition, a standard tension-band wiring technique has also been tested as one form of control.

BACKGROUND

Satisfactory compression at a fracture site reduces the risk of failure of fixation, loss of reduction (interfragmentary gap >2mm) and subsequent risks of malunion, delayed union, and ultimately non-union from excessive movement. Stainless-steel wire can provide a stable rigid construct but is associated with complications. Tension-band fixation employing a braided polyester non-absorbable suture provides a less rigid construct. However, satisfactory clinical results and fewer complications are reported. The method by which a suture is tied has an effect on initial compression provided the fracture is reduced. However, it also has an effect on the degree of fracture gap once it is subject to biomechanical distraction.

METHODS

By measuring the output of a strain gauge Wheatstone bridge of a purpose built rig that had been calibrated against fracture gap and compression force, the various tension-band fixation techniques as discussed above were evaluated.

RESULTS

The tension-band suture technique examined in this work (the modified Wagoner's Hitch) has been evaluated. It has quantitatively shown less fracture gap than other recognised tension-band suture and wire techniques. The results exhibit statistical significance (p<0.001).

CONCLUSIONS

This evaluation study has produced quantitative and comparable data of fracture gap as observed with the model of a transverse patella fracture, for both new and established surgical techniques. The contribution this study has made to the knowledge of the subject is that a testing device similar to the one in this study may be useful in the future for conducting preliminary studies of new or established tension-band techniques. The proposed tension-band suture method tested in this dissertation provided statistically significant quantitative data, which may after further work, support its use as an alternative method in the clinical setting.

Intraoperative incidents and complications in primary arthroscopic anterior cruciate ligament reconstruction

PURPOSE

To analyze intraoperative incidents and complications in primary arthroscopic anterior cruciate ligament reconstruction (ACLR) with bone-patellar tendon-bone (BPTB) and quadruple hamstring semitendinosus and gracilis (STG) grafts.

METHODS

From January 1999 to June 2004, we performed 330 BPTB and 96 STG procedures. Intraoperative incidents and complications were recorded for each case.

RESULTS

Our overall intraoperative incident and complication rate was 9.6% and was higher in the STG group (13.5%) than in the BPTB group (8.7%). In the BPTB group, combined incidents and complications according to stage of the procedure consisted of graft harvesting, 4 cases (1.21%); tunnel placement, 9 cases (2.7%); and graft fixation, 15 cases (4.5%). In the STG group, combined incidents and complications included graft harvesting, 8 cases (8.3%); tunnel placement, 1 case (1%); graft fixation, 3 cases (3.1%); and others, 1 case (1%). In 4 patients (0.9%), we had to change the technique from BPTB to STG and vice versa. In 2 STG cases, conversion of the technique was required because of graft-related problems; in the third case, it was necessary because of fixation. One BPTB was converted to STG because the graft was completely transected as a result of improper screw fixation technique.

CONCLUSIONS

None of the encountered incidents and complications had an adverse effect on final stability or on range of motion in operated knees. All incidents and complications were due to technical errors that occurred during graft harvesting, tunnel placement, or graft fixation. It is known that technical errors are preventable if careful surgical technique is followed. The surgeon must be well versed in various reconstruction techniques to be able to detect and resolve forthcoming incidents or complications. Backup implants are mandatory.

LEVEL OF EVIDENCE

IV, therapeutic case series.

A biomechanical analysis of sublaminar and subtransverse process fixation using metal wires and polyethylene cables

STUDY DESIGN

An in vitro biomechanical calf thoracic spine study.

OBJECTIVE

To evaluate the biomechanical stability of sublaminar and subtransverse process fixation using stainless steel wires and ultra-high molecular weight polyethylene (UHMWPE) cables.

SUMMARY OF BACKGROUND DATA

It is commonly held that transverse process fixation provides less stability than sublaminar fixation. To our knowledge, this is the first biomechanical study to compare the stability afforded by sublaminar fixation and subtransverse process fixation using metal wire and UHMWPE cable before and after cyclic loading.

METHODS

There were 6 fresh-frozen calf thoracic spines (T4-T9) used to determine the sublaminar fixation stiffness and subtransverse process fixation stiffness in each group. Double strands of 18-gauge stainless steel wire, 3 and 5 mm-width UHMWPE cable (Nesplon; Alfresa, Inc., Osaka, Japan) were applied to each spine. Cyclic pure flexion-extension moment loading (2 Nm, 0.5 Hz, 5000 cycles) was applied after the initial stability was analyzed by measuring the range of motion. Statistical analyses were used to delineate differences between the various experimental groups.

RESULTS

Subtransverse process wiring was more stable than sublaminar wiring after cyclic loading in flexion-extension (P < 0.05). There were no significant differences between each group in lateral bending and axial rotation after cyclic loading. Sublaminar stainless steel wiring was more stable than sublaminar 3 and 5-mm cable before and after cyclic loading in axial rotation (P < 0.01). Acute subtransverse process fixation using 3-mm cable was less stable after cyclic loading in axial rotation (P < 0.05). All other groups did not produce statistically significant differences.

CONCLUSIONS

Subtransverse process fixation provides at least as much stability as sublaminar fixation. A 5-mm UHMWPE cable and stainless steel wire result in equivalent sublaminar and subtransverse process stability.

Pediatric olecranon fractures: open reduction and internal fixation with removable Kirschner wires and absorbable sutures

The authors present an original fixation technique for pediatric olecranon fractures that avoids reoperation to remove hardware as compared with the standard fixation technique with Kirschner wires and tension band wiring as advocated by the AO technique. The authors' technique uses two percutaneously placed Kirschner wires to fixate displaced transverse and oblique olecranon fractures. Prior to the insertion of the wires, the fracture is reduced through a standard open approach. Augmentation of the pin fixation is achieved with absorbable sutures. Six patients have been treated with this technique, with a mean follow-up of 13 months. No immediate complications have been noted; one patient has a loss of extension of 10 degrees at the elbow. Radiographic results are good, with no loss of reduction. This technique avoids the need for reoperation for hardware removal without compromising the quality of reduction.

Thumb metacarpophalangeal ulnar collateral ligament injuries: a biomechanical simulation study of four static reconstructions

PURPOSE

To determine the optimal tunnel placement positions for tendon graft reconstruction of chronic thumb metacarpophalangeal (MCP) ulnar collateral ligament injuries that would stabilize the joint while maintaining motion.

METHODS

Four commonly used tunnel placement methods were simulated on a cadaveric model using fresh-frozen thumbs and a suture/screw construct. The methods were as follows: (1) triangular configuration with apex proximal, (2) triangular configuration with apex distal, (3) cruciate configuration, and (4) parallel configuration. Stability was tested by valgus loading at 0 degrees and 30 degrees , and range of motion was tested by loading the thumb tendons. Statistical analysis was performed by 1-way analysis of variance testing.

RESULTS

Valgus load stability testing at 0 degrees and 30 degrees showed that all 4 reconstruction methods stabilized the MCP joint compared with the fully sectioned state. The amount of stability achieved was not significantly different between the 4 methods. Only the reconstruction method, however, with a triangular configuration with the apex proximal restored flexion/extension range of motion not significantly different from the intact state. The other 3 methods resulted in significantly decreased range of motion.

CONCLUSIONS

The reconstruction tunnel positioning of triangular configuration with apex proximal stabilizes the thumb MCP joint while maintaining flexion/extension range of motion. We recommend this configuration for chronic MCP joint injuries in which the native ulnar collateral ligament is inadequate and tendon graft reconstruction is performed.