Crystallization at Inorganic-organic Interfaces: Biominerals and Biomimetic Synthesis

Advances in implants and bone graft types for lumbar spinal fusion surgery

The increasing prevalence of spinal disorders worldwide necessitates advanced treatments, particularly interbody fusion for severe cases that are unresponsive to non-surgical interventions. This procedure, especially 360° lumbar interbody fusion, employs an interbody cage, pedicle screw-and-rod instrumentation, and autologous bone graft (ABG) to enhance spinal stability and promote fusion. Despite significant advancements, a persistent 10% incidence of non-union continues to result in compromised patient outcomes and escalated healthcare costs. Innovations in lumbar stabilisation seek to mimic the properties of natural bone, with evolving implant materials like titanium (Ti) and polyetheretherketone (PEEK) and their composites offering new prospects. Additionally, biomimetic cages featuring precisely engineered porosities and interconnectivity have gained traction, as they enhance osteogenic differentiation, support osteogenesis, and alleviate stress-shielding. However, the limitations of ABG, such as harvesting morbidities and limited fusion capacity, have spurred the exploration of sophisticated solutions involving advanced bone graft substitutes. Currently, demineralised bone matrix and ceramics are in clinical use, forming the basis for future investigations into novel bone graft substitutes. Bioglass, a promising newcomer, is under investigation despite its observed rapid absorption and the potential for foreign body reactions in preclinical studies. Its clinical applicability remains under scrutiny, with ongoing research addressing challenges related to burst release and appropriate dosing. Conversely, the well-documented favourable osteogenic potential of growth factors remains encouraging, with current efforts focused on modulating their release dynamics to minimise complications. In this evidence-based narrative review, we provide a comprehensive overview of the evolving landscape of non-degradable spinal implants and bone graft substitutes, emphasising their applications in lumbar spinal fusion surgery. We highlight the necessity for continued research to improve clinical outcomes and enhance patient well-being.

Polyaptamer-Driven Crystallization of Alendronate for Synergistic Osteoporosis Treatment through Osteoclastic Inhibition and Osteogenic Promotion

Osteoclastic inhibition using antiresorptive bisphosphonates and osteogenic promotion using antisclerostin agents represent two distinct osteoporosis treatments in clinical practice, each individual treatment suffers from unsatisfactory therapeutic efficacy due to its indirect intervention in osteoclasis and promotion of osteogenesis simultaneously. Although this issue is anticipated to be resolved by drug synergism, a tempting carrier-free dual-medication nanoassembly remains elusive. Herein, we prepare such a nanoassembly made of antiresorptive alendronate (ALN) crystal and antisclerostin polyaptamer (Apt) via a nucleic acid-driven crystallization method. This nanoparticle can protect Apt from rapid nuclease degradation, avoid the high cytotoxicity of free ALN, and effectively concentrate in the cancellous bone by virtue of the bone-binding ability of DNA and ALN. More importantly, the acid microenvironment of cancellous bone triggers the disassociation of nanoparticles for sustained drug release, from which ALN inhibits the osteoclast-mediated bone resorption while Apt promotes osteogenic differentiation. Our work represents a pioneering demonstration of nucleic acid-driven crystallization of a bisphosphonate into a tempting carrier-free dual-medication nanoassembly. This inaugural advancement augments the antiosteoporosis efficacy through direct inhibition of osteoclasis and promotion of osteogenesis simultaneously and establishes a paradigm for profound understanding of the underlying synergistic antiosteoporosis mechanism of antiresorptive and antisclerostin components. It is envisioned that this study provides a highly generalizable strategy applicable to the tailoring of a diverse array of DNA-inorganic nanocomposites for targeted regulation of intricate pathological niches.

Algal-bacterial consortium promotes carbon sink formation in saline environment

INTRODUCTION

The level of atmospheric CO2 has continuously been increasing and the resulting greenhouse effects are receiving attention globally. Carbon removal from the atmosphere occurs naturally in various ecosystems. Among them, saline environments contribute significantly to the global carbon cycle. Carbonate deposits in the sediments of salt lakes are omnipresent, and the biological effects, especially driven by halophilic microalgae and bacteria, on carbonate formation remain to be elucidated.

OBJECTIVES

The present study aims to characterize the carbonates formed in saline environments and demonstrate the mechanisms underlying biological-driven CO2 removal via microalgal-bacterial consortium.

METHODS

The carbonates naturally formed in saline environments were collected and analyzed. Two saline representative organisms, the photosynthetic microalga Dunaliella salina and its mutualistic halophilic bacteria Nesterenkonia sp. were isolated from the inhabiting saline environment and co-cultivated to study their biological effects on carbonates precipitation and isotopic composition. During this process, electrochemical parameters and Ca2+ flux, and expression of genes related to CaCO3 formation were analyzed. Genome sequencing and metagenomic analysis were conducted to provide molecular evidence.

RESULTS

The results showed that natural saline sediments are enriched with CaCO3 and enrichment of genes related to photosynthesis and ureolysis. The co-cultivation stimulated 54.54% increase in CaCO3 precipitation and significantly promoted the absorption of external CO2 by 49.63%. A pH gradient was formed between the bacteria and algae culture, creating 150.22 mV of electronic potential, which might promote Ca2+ movement toward D. salina cells. Based on the results of lab-scale induction and 13C analysis, a theoretical calculation indicates a non-negligible amount of 0.16 and 2.3 Tg C/year carbon sequestration in China and global saline lakes, respectively.

CONCLUSION

The combined effects of these two typical representative species have contributed to the carbon sequestration in saline environments, by promoting Ca2+ influx and increase of pH via microalgal and bacterial metabolic processes.

Effect of borate, fluoride and strontium ions on biomimetic nucleation of calcium phosphate studied using solid-state nuclear magnetic resonance and X-ray diffraction

OBJECTIVES

Apatite minerals can have various anions and cations in their crystal structure in addition to phosphate ion (PO₄³⁻) and calcium ion (Ca2+). The aim of this study is to investigate effects of the borate, fluoride and strontium ions on biomimetic nucleation of calcium phosphate.

METHODS

Nano-crystalline hydroxyapatite (H-Ap) was obtained from a supersaturated buffered solution containing 4.12 mM HPO42- and 5.88 mM Ca2+ (H-Ap). Four additives were used in solid solution methods: (i) 0.588 mM F- (F-Ap), (ii) 5.88 mM Sr2+ (Sr-Ap), (iii) 4.12 mM BO33- (BO3-Ap), and (iv) a surface pre-reacted glass ionomer (S-PRG) filler eluate that contained 0.17 mM Sr2+, 0.588 mM F-, 11.1 mM BO33-- (SPRG-Ap). Apatite crystallization was investigated using a solid-state magic-angle spinning NMR spectroscopy and X-ray diffraction (XRD) with the Rietveld analysis.

RESULTS

A 2D 1H-31P heteronuclear-correlation NMR showed F- ion incorporation in the apatite structure of the F-Ap and SPRG-Ap. The peaks on the 31P axis of the F-Ap, Sr-Ap, and BO3-Ap were different from that of the H-Ap, and the full width at half maximum increased in the following order: H-Ap∼F-Ap∼BO3-Ap< SPRG-Ap< Sr-Ap, suggesting the incorporation of the F-, Sr2+ and BO33-. The incorporation of F and BO3 was further confirmed by 19F and 11B NMR. The XRD revealed that Sr2+ was preferentially incorporated into the CaII site.

SIGNIFICANCE

The F-, Sr2+ and BO33-ions might be involved in modifying the crystallization of apatite precipitation, producing a variety of apatite. S-PRG filler that release these ions may have an effect on remineralization, i.e., the reformation of apatite lost due to caries.

Resolving protein-mineral interfacial interactions during in vitro mineralization by atom probe tomography

Organic macromolecules exert remarkable control over the nucleation and growth of inorganic crystallites during (bio)mineralization, as exemplified during enamel formation where the protein amelogenin regulates the formation of hydroxyapatite (HAP). However, it is poorly understood how fundamental processes at the organic-inorganic interface, such as protein adsorption and/or incorporation into minerals, regulates nucleation and crystal growth due to technical challenges in observing and characterizing mineral-bound organics at high-resolution. Here, atom probe tomography techniques were developed and applied to characterize amelogenin-mineralized HAP particles in vitro, revealing distinct organic-inorganic interfacial structures and processes at the nanoscale. Specifically, visualization of amelogenin across the mineralized particulate demonstrates protein can become entrapped during HAP crystal aggregation and fusion. Identification of protein signatures and structural interpretations were further supported by standards analyses, i.e., defined HAP surfaces with and without amelogenin adsorbed. These findings represent a significant advance in the characterization of interfacial structures and, more so, interpretation of fundamental organic-inorganic processes and mechanisms influencing crystal growth. Ultimately, this approach can be broadly applied to inform how potentially unique and diverse organic-inorganic interactions at different stages regulates the growth and evolution of various biominerals.

Synthesis and Characterization of a New Alginate/Carrageenan Crosslinked Biopolymer and Study of the Antibacterial, Antioxidant, and Anticancer Performance of Its Mn(II), Fe(III), Ni(II), and Cu(II) Polymeric Complexes

Natural polysaccharides are essential to a wide range of fields, including medicine, food, and cosmetics, for their various physiochemical and biological properties. However, they still have adverse effects limiting their further applications. Consequently, possible structural modifications should be carried out on the polysaccharides for their valorization. Recently, polysaccharides complexed with metal ions have been reported to enhance their bioactivities. In this paper, we synthesized a new crosslinked biopolymer based on sodium alginate (AG) and carrageenan (CAR) polysaccharides. The biopolymer was then exploited to form complexes with different metal salts including MnCl₂·4H₂O, FeCl₃·6H₂O, NiCl₂·6H₂O, and CuCl₂·2H₂O. The four polymeric complexes were characterized by Fourier-transform infrared spectroscopy (FT-IR), elemental analysis, ultraviolet-visible spectroscopy (UV-Vis), magnetic susceptibility, molar conductivity methods, and thermogravimetric analysis. The X-ray crystal structure of the Mn(II) complex is tetrahedral and belongs to the monoclinic crystal system with the space group P121/n1. The Fe(III) complex is octahedral and crystal data fit with the cubic crystal system with the space group Pm-3m. The Ni(II) complex is tetrahedral and crystal data correspond to the cubic crystal arrangement with the space group Pm-3m. The data estimated for the Cu(II) polymeric complex revealed that it is tetrahedral and belongs to the cubic system with the space group Fm-3m. The antibacterial study showed significant activity of all the complexes against both Gram-positive bacteria (Staphylococcus aureus and Micrococcus luteus) and Gram-negative (Escherichia coli and Salmonella typhimurium) pathogenic strains. Similarly, the various complexes revealed an antifungal activity against Candida albicans. The Cu(II) polymeric complex recorded a higher antimicrobial activity with an inhibitory zone reaching 4.5 cm against Staphylococcus aureus bacteria and the best antifungal effect of 4 cm. Furthermore, higher antioxidant values of the four complexes were obtained with DPPH scavenging activity varying from 73 to 94%. The two more biologically effective complexes were then selected for the viability cell assessments and in vitro anticancer assays. The polymeric complexes revealed excellent cytocompatibility with normal human breast epithelial cells (MCF10A) and a high anticancer potential with human breast cancer cells (MCF-7) which increase significantly in a dose-dependent manner.

Biomimetic Mineral Synthesis by Nanopatterned Supramolecular-Block Copolymer Templates

Supramolecular structures of matrix proteins in mineralizing tissues are known to direct the crystallization of inorganic materials. Here we demonstrate how such structures can be synthetically directed into predetermined patterns for which functionality is maintained. The study employs block copolymer lamellar patterns with alternating hydrophilic and hydrophobic regions to direct the assembly of amelogenin-derived peptide nanoribbons that template calcium phosphate nucleation by creating a low-energy interface. Results show that the patterned nanoribbons retain their β-sheet structure and function and direct the formation of filamentous and plate-shaped calcium phosphate with high fidelity, where the phase, amorphous or crystalline, depends on the choice of mineral precursor and the fidelity depends on peptide sequence. The common ability of supramolecular systems to assemble on surfaces with appropriate chemistry combined with the tendency of many templates to mineralize multiple inorganic materials implies this approach defines a general platform for bottom-up-patterning of hybrid organic-inorganic materials.

A Tale of Two Foulants: The Coupling of Organic Fouling and Mineral Scaling in Membrane Desalination

Membrane desalination that enables the harvesting of purified water from unconventional sources such as seawater, brackish groundwater, and wastewater has become indispensable to ensure sustainable freshwater supply in the context of a changing climate. However, the efficiency of membrane desalination is greatly constrained by organic fouling and mineral scaling. Although extensive studies have focused on understanding membrane fouling or scaling separately, organic foulants commonly coexist with inorganic scalants in the feedwaters of membrane desalination. Compared to individual fouling or scaling, combined fouling and scaling often exhibits different behaviors and is governed by foulant-scalant interactions, resembling more complex but practical scenarios than using feedwaters containing only organic foulants or inorganic scalants. In this critical review, we first summarize the performance of membrane desalination under combined fouling and scaling, involving mineral scales formed via both crystallization and polymerization. We then provide the state-of-the-art knowledge and characterization techniques pertaining to the molecular interactions between organic foulants and inorganic scalants, which alter the kinetics and thermodynamics of mineral nucleation as well as the deposition of mineral scales onto membrane surfaces. We further review the current efforts of mitigating combined fouling and scaling via membrane materials development and pretreatment. Finally, we provide prospects for future research needs that guide the design of more effective control strategies for combined fouling and scaling to improve the efficiency and resilience of membrane desalination for the treatment of feedwaters with complex compositions.

Rational Design of a Bifunctional Peptide Exhibiting Lithium Titanate Oxide and Carbon Nanotube Affinities for Lithium-Ion Battery Applications

Phage display is employed as a method for identifying polypeptides that bind to lithium-ion battery materials, specifically lithium titanate oxide (LTO) and multiwalled carbon nanotubes (MWCNTs). Output/input assays are used as a quantitative measure to narrow down the strongest binding polypeptides from several peptides selected through biopanning. Negatively stained transmission electron microscopy is used to verify that a phage presenting a particular LTO or MWCNT binding peptide sequence colocalizes with the respective material. Heterologous expression allows for ample polypeptides to be grown and purified using a peptide expression vector. Isothermal titration calorimetry in conjunction with alanine scanning enables determination of the pertinent residues involved in LTO binding and yields a dissociation constant of 3.41 μM. A rationally designed bifunctional peptide exhibiting LTO and MWCNT binding domains is subsequently validated to exhibit both LTO and MWCNT affinities and is incorporated as a binding agent in LTO coin-type electrochemical cells where the bifunctional peptide demonstrates stability at high cycle rates and potential as an alternative to non-specific binding agents for aqueous slurry processing of lithium-ion battery electrodes.

Discrete Orientations of Interfacial Waters Direct Crystallization of Mica-Binding Proteins

Understanding the basis of templated molecular assembly on a solid surface requires a fundamental comprehension of both short- and long-range aqueous response to the surface under a variety of solution conditions. Herein we provide a detailed picture of how the molecular-scale response to different mica surfaces yields distinct solvent orientations that produce quasi-static directional potentials onto which macromolecules can adsorb. We connect this directionality to observed (a)symmetric epitaxial alignment of designed proteins onto these surfaces, corroborate our findings with 3D atomic force microscopy experiments, and identify slight differences in surface structure as the origin of this effect. Our work provides a detailed picture of the intrinsic electrolyte response in the vicinity of mineral interfaces, with clear predictions for experiment, and highlights the role of solvent on the predictive assembly of hierarchical materials on mineral surfaces.

Recalibrating the calcium trap in amino acid carboxyl groups via classical molecular dynamics simulations

In order to use classical molecular dynamics to complement experiments accurately, it is important to use robust descriptions of the system. The interactions between biomolecules, like aspartic and glutamic acid, and dissolved ions are often studied using standard biomolecular force-fields, where the interactions between biomolecules and cations are often not parameterized explicitly. In this study, we have employed metadynamics simulations to investigate different interactions of Ca with aspartic and glutamic acid and constructed the free energy profiles of Ca²⁺-carboxylate association. Starting from a generally accepted, AMBER-based force field, the association was substantially over and under-estimated, depending on the choice of water model (TIP3P and SPC/fw, respectively). To rectify this discrepancy, we have replaced the default calcium parameters. Additionally, we modified the σ_ij value in the hetero-atomic Lennard-Jones interaction by 0.5% to further improve the interaction between Ca and carboxylate, based on comparison with the experimentally determined association constant for Ca with the carboxylate group of L-aspartic acid. The corrected description retrieved the structural properties of the ion pair in agreement with the original biomolecule - Ca²⁺ interaction in AMBER, whilst also producing an association constant comparable to experimental observations. This refined force field was then used to investigate the interactions between amino acids, calcium and carbonate ions during biogenic and biomimetic calcium carbonate mineralisation.

Molecular Dynamics Simulation of Protein Cages

Molecular dynamics (MD) simulations enable the description of the physical movement of the system over time based on classical mechanics at various scales depending on the models. Protein cages are a particular group of different-size proteins with hollow, spherical structures and are widely found in nature, which have vast applications in numerous fields. The MD simulation of cage proteins is particularly important as a powerful tool to unveil their structures and dynamics for various properties, assembly behavior, and molecular transport mechanisms. Here, we describe how to conduct MD simulations for cage proteins, especially technical details, and analyze some of the properties of interest using GROMACS/NAMD packages.

Biodegradable interbody cages for lumbar spine fusion: Current concepts and future directions

Lumbar fusion often remains the last treatment option for various acute and chronic spinal conditions, including infectious and degenerative diseases. Placement of a cage in the intervertebral space has become a routine clinical treatment for spinal fusion surgery to provide sufficient biomechanical stability, which is required to achieve bony ingrowth of the implant. Routinely used cages for clinical application are made of titanium (Ti) or polyetheretherketone (PEEK). Ti has been used since the 1980s; however, its shortcomings, such as impaired radiographical opacity and higher elastic modulus compared to bone, have led to the development of PEEK cages, which are associated with reduced stress shielding as well as no radiographical artefacts. Since PEEK is bioinert, its osteointegration capacity is limited, which in turn enhances fibrotic tissue formation and peri-implant infections. To address shortcomings of both of these biomaterials, interdisciplinary teams have developed biodegradable cages. Rooted in promising preclinical large animal studies, a hollow cylindrical cage (Hydrosorb™) made of 70:30 poly-l-lactide-co-d, l-lactide acid (PLDLLA) was clinically studied. However, reduced bony integration and unfavourable long-term clinical outcomes prohibited its routine clinical application. More recently, scaffold-guided bone regeneration (SGBR) with application of highly porous biodegradable constructs is emerging. Advancements in additive manufacturing technology now allow the cage designs that match requirements, such as stiffness of surrounding tissues, while providing long-term biomechanical stability. A favourable clinical outcome has been observed in the treatment of various bone defects, particularly for 3D-printed composite scaffolds made of medical-grade polycaprolactone (mPCL) in combination with a ceramic filler material. Therefore, advanced cage design made of mPCL and ceramic may also carry initial high spinal forces up to the time of bony fusion and subsequently resorb without clinical side effects. Furthermore, surface modification of implants is an effective approach to simultaneously reduce microbial infection and improve tissue integration. We present a design concept for a scaffold surface which result in osteoconductive and antimicrobial properties that have the potential to achieve higher rates of fusion and less clinical complications. In this review, we explore the preclinical and clinical studies which used bioresorbable cages. Furthermore, we critically discuss the need for a cutting-edge research program that includes comprehensive preclinical in vitro and in vivo studies to enable successful translation from bench to bedside. We develop such a conceptual framework by examining the state-of-the-art literature and posing the questions that will guide this field in the coming years.

Confinement induces stable calcium carbonate formation in silica nanopores

Scalable efforts to remove anthropogenic CO₂via the formation of durable carbonates require us to harness siliceous nanoporous geologic materials for carbon storage. While calcium carbonate formation has been extensively reported in bulk fluids, there is a limited understanding of the influence of nanoconfined fluids on the formation of specific stable and metastable polymorphs of calcium carbonates in siliceous materials that are abundant in subsurface environments. To address this challenge, silica nanochannels with diameters of 3.7 nm are architected and the formation of specific calcium carbonate phases is investigated using X-ray diffraction (XRD), and molecular dynamics (MD) simulations. The formation of stable calcium carbonate (or calcite) is noted in silica nanochannels. The presence of fewer water molecules in the first hydration shell of calcium ions in confinement compared to in bulk fluids contributes to stable calcium carbonate formation. These studies show that nanoporous siliceous environments favor the formation of stable calcium carbonate formation.

The variability in the structural and functional properties of coccolith base plates

Biomineralization processes exert varying levels of control over crystallization, ranging from poorly ordered polycrystalline arrays to intricately shaped single crystals. Coccoliths, calcified scales formed by unicellular algae, are a model for a highly controlled crystallization process. The coccolith crystals nucleate next to an organic oval structure that was termed the base plate, leading to the assumption that the base plate is responsible for the oriented nucleation of the crystals via stereochemical interactions. In recent years, several works focusing on a well-characterized model species demonstrated a fundamental role for indirect interactions that facilitate coccolith crystallization. Here, we develop the tools to extract the base plates from five different species, giving the opportunity to systematically explore the relations between base plate and coccolith properties. We used multiple imaging techniques to evaluate the structural and chemical features of the base plates under native hydrated conditions. The results show a wide range of properties, overlaid on a common rudimentary scaffold that lacks any detectable structural or chemical motifs that can explain direct nucleation control. This work emphasizes that it is the combination between the base plate and the chemical environment inside the cell that cooperatively facilitate the exquisite control over the crystallization process. STATEMENT OF SIGNIFICANCE: : Biological organic scaffolds can serve as functional surfaces that guide the formation of inorganic materials. However, in many cases the specific interactions that facilitate such tight regulation are complex and not fully understood. In this work, we elucidate the architecture of such model biological template, an organic scale that directs the assembly of exquisite crystalline arrays of marine microalgae. By using cryo electron microscopy, we reveal the native state organization of these scales from several species. The observed similarities and differences allow us to propose that the chemical microenvironment, rather than stereochemical matching, is the pivotal regulator of the process.

Biomimetic non-classical crystallization drives hierarchical structuring of efficient circularly polarized phosphors

Hierarchically structured chiral luminescent materials hold promise for achieving efficient circularly polarized luminescence. However, a feasible chemical route to fabricate hierarchically structured chiral luminescent polycrystals is still elusive because of their complex structures and complicated formation process. We here report a biomimetic non-classical crystallization (BNCC) strategy for preparing efficient hierarchically structured chiral luminescent polycrystals using well-designed highly luminescent homochiral copper(I)-iodide hybrid clusters as basic units for non-classical crystallization. By monitoring the crystallization process, we unravel the BNCC mechanism, which involves crystal nucleation, nanoparticles aggregation, oriented attachment, and mesoscopic transformation processes. We finally obtain the circularly polarized phosphors with both high luminescent efficiency of 32% and high luminescent dissymmetry factor of 1.5 × 10⁻², achieving the demonstration of a circularly polarized phosphor converted light emitting diode with a polarization degree of 1.84% at room temperature. Our designed BNCC strategy provides a simple, reliable, and large-scale synthetic route for preparing bright circularly polarized phosphors.

Chiral emitters with high photoluminescence quantum yield are desirable for use in circularly polarized LEDs. The authors demonstrate the transfer of chirality from nanoscale copper iodide clusters to microscale chiral luminescent polycrystals by non-classical crystallization.

Influence of dietary dacitic tuff breccia on laying hen performance and egg quality parameters and bone structure at 85 weeks of age after a non-anorexic molt program at 73 to 77 weeks

The objective of the study was to assess the efficacy of AZOMITE (AZM), a dacitic tuff breccia, in laying hens through egg quality and production parameters. A total of ninety six 73-wk-old Hy-Line W-36 commercial laying hens were randomly assigned to 2 dietary treatments, a control diet and the same diet containing 0.25% AZM, with 24 replicates of 2 hens/replication. From 73 to 77 wk, hens went through nonanorexic molt, and, from 77 to 85 wk, the hens were evaluated for egg production, eggshell quality, and bone health. At wk 85, tibiotarsi were collected for ash and mineral composition, ileal contents were collected for calcium, phosphorus, apparent metabolizable energy corrected for N (AMEn), and apparent nitrogen retention (ANR) evaluation. AZM-fed hens tended to have higher body weight (P = 0.07) from 82 to 83 and 84 to 85 wk, and higher hen day egg production than control (90.54 vs. 79.51%, P = 0.005) from 84 to 85 wk. In general, no differences were reported in feed intake, eggshell color, egg weight, albumen height, Haugh units, or eggshell thickness (P > 0.05). However, shell strength and elasticity were improved (P < 0.02) and yolk color was decreased (P = 0.03) in AZM-fed hens than control. Moreover, the digestibility of Ca, AMEn, and ANR was increased with 0.25% AZM compared to control (P < 0.01). Tibiotarsi P and Ca percentage were lower in AZM-fed birds than control (P < 0.01), without affecting bone strength and mineral density (P > 0.36). Therefore, the use of 0.25% AZM showed a potential in improving egg production and eggshell strength, while maintaining bone quality in post-molt laying hens.

Inorganic phosphate in growing calcium carbonate abalone shell suggests a shared mineral ancestral precursor

The presence of phosphate from different origins (inorganic, bioorganic) is found more and more in calcium carbonate-based biominerals. Phosphate is often described as being responsible for the stabilization of the transient amorphous calcium carbonate phase. In order to specify the composition of the mineral phase deposited at the onset of carbonated shell formation, the present study investigates, down to the nanoscale, the growing shell from the European abalone Haliotis tuberculata, using a combination of solid state nuclear magnetic resonance, scanning transmission electron microscope and spatially-resolved electron energy loss spectroscopy techniques. We show the co-occurrence of inorganic phosphate with calcium and carbonate throughout the early stages of abalone shell formation. One possible hypothesis is that this first-formed mixed mineral phase represents the vestige of a shared ancestral mineral precursor that appeared early during Evolution. In addition, our findings strengthen the idea that the final crystalline phase (calcium carbonate or phosphate) depends strongly on the nature of the mineral-associated proteins in vivo.

Phosphate involvement in calcium carbonate biominerals raises questions on biomineralisation pathways. Here, the authors explore the presence of phosphate in the growing shell of the European abalone and suggest a shared mixed mineral ancestral precursor with final crystal phase being selected by mineral-associated proteins.

Polymer-Inorganic Crystalline Nanocomposite Materials via Nanoparticle Occlusion

Efficient occlusion of guest nanoparticles into host single crystals opens up a straightforward and versatile way to construct functional crystalline nanocomposites. This new technique has attracted increasing research interest because it enables the composition, structure and property of the resulting nanocomposites to be well-controlled. In this review article, we aim to provide a comprehensive summary of nanoparticle occlusion within inorganic crystals. First, we summarize recently-developed strategies for the occlusion of various colloidal particles (e.g., diblock copolymer nanoparticles, polymer-modified inorganic nanoparticles, oil droplets, etc.) within host crystals (e.g., CaCO₃ , ZnO or ZIF-8). Second, new results pertaining to spatially-controlled occlusion and the physical mechanism of nanoparticle occlusion are briefly discussed. Finally, we highlight the physicochemical properties and potential applications of various functional nanocomposite crystals constructed via nanoparticle occlusion and we also offer our perspective on the likely future for this research topic. This article is protected by copyright. All rights reserved.

Molecular Origin of the Biologically Accelerated Mineralization of Hydroxyapatite on Bacterial Cellulose for More Robust Nanocomposites

Biomineralization generates hierarchically structured minerals with vital biological functions in organisms. This strategy has been adopted to construct complex architectures to achieve similar functionalities, mostly under chemical environments mimicking biological components. The molecular origin of the biofacilitated mineralization process is elusive. Herein, we describe the mineralization of hydroxyapatite (HAp) accompanying the biological secretion of nanocellulose by Acetobacter xylinum. In comparison with mature cellulose, the newly biosynthesized cellulose molecules greatly accelerate the nucleation rate and facilitate the uniform distribution of HAp crystals, thereby generating composites with a higher Young modulus. Both simulations and experiments indicate that the biological metabolism condition allows the easier capture of calcium ions by the more abundant hydroxyl groups on the glucan chain before the formation of hydrogen bonding, for the subsequent growth of HAp crystals. Our work provides more insights into the biologically accelerated mineralization process and presents a different methodology for the generation of biomimetic nanocomposites.

Cell-Free Biomimetic Mineralization Strategies to Regenerate the Enamel Microstructure

The distinct architecture of native enamel gives it its exquisite appearance and excellent intrinsic-extrinsic fracture toughening properties. However, damage to the enamel is irreversible. At present, the clinical treatment for enamel lesion is an invasive method; besides, its limitations, caused by the chemical and physical difference between restorative materials and dental hard tissue, makes the restorative effects far from ideal. With more investigations on the mechanism of amelogenesis, biomimetic mineralization techniques for enamel regeneration have been well developed, which hold great promise as a non-invasive strategy for enamel restoration. This review disclosed the chemical and physical mechanism of amelogenesis; meanwhile, it overviewed and summarized studies involving the regeneration of enamel microstructure in cell-free biomineralization approaches, which could bring new prospects for resolving the challenges in enamel regeneration.

Multi-layered Barium and Strontium Carbonate Structures Induced by the Small Organic Dye Acid Orange 7

The crystal growth behavior induced by small molecular additives is commonly assumed to be far less complex and rich in comparison to that obtained when using macromolecules. Herein, we demonstrate that the small organic molecule Acid Orange 7 can induce a large diversity of multi-layered barium carbonate structures. These multi-layered structures stem from the small molecule imperfectly blocking the fastest growing crystal face. By tuning the balance of growth and inhibition, we control the layer shape and thickness of the structures. Extending these strategies to strontium carbonate enables the precipitation of large quasi two-dimensional multi-layer sheets. Collectively, these findings highlight the unforeseen potential for using small organic molecules to induce the formation of complex inorganic structures.

Surfactant efficiency on pentachlorophenol-contaminated wastewater enhanced by Pseudomonas putida AJ 785569

This study aims to evaluate the effect of three surfactants on the removal of PCP (800 mg L^-1) from Secondary Treated Wastewater (STWW) by Pseudomonas putida AJ 785569. The effect of surfactants [sodium lauryl sulfate (SDS) as anionic, Tween 80 (TW80) as non-anionic and cetyltrimethylammonium bromide (CTAB) as cationic] is tested about the three following aspects: (1) bacterial growth, (2) bacterial biofilm formation or development and (3) PCP rate removal. The results showed that strain P. putida AJ 785569 could adsorb around 30 mg L^-1 and remove 600 mg L^-1 of PCP within 168 h of incubation. The SDS developed the growth of bacteria and the removal of PCP. This PCP removal in mineral salt medium (MSM) is around 760 mg L^-1 (95% degradation) higher than the ones registered with CTAB and TW80 with a value 506.75 (63% degradation) and 364.1 mg L^-1 (45% degradation), respectively. The obtained results of chloride concentration showed an important relation with PCP removal during incubation with an important value. Monitoring the development of bacterial biofilm, in MSM medium added with PCP (100 mg L^-1) by strain P. putida AJ 785569, showed a significant increase in the optical density value from 0.9 to 4 at λ = 595 nm, a modification of strain P. putida AJ 785569's morphotype, density and color colonies.

Enhanced crystallization behaviors and dielectric performance of poly(vinylidene fluoride) film induced by polyamide-1

Poly(vinylidene fluoride) (PVDF)-based composites attract tremendous attention as dielectric materials. However, their development has been limited due to the raised problem in the in-homogeneous polymer composites. In this work, a novel PVDF-based film incorporated with polyamide-1, containing the highest density of dipole among all polyamides, was prepared to improve the crystallization behaviors and dielectric properties. The results showed that the optimal concentration of polyamide-1 in PVDF was 6 wt.%. The crystallization rate of PVDF was improved in the presence of polyamide-1. Interestingly, the polyamide-1 was conductive to the formation of β form crystal of PVDF, which exhibited great electric performance. The dielectric constant of PVDF increased sharply and loss tangent still kept at a low level of 0.03@100 Hz when the concentration of polyamide-1 was 6 wt.%. This work may provide a new direction to design dielectric materials for PVDF blends.

The novel matrix protein hic7 of hyriopsis cumingii participates in the formation of the shell and pearl

Shell matrix proteins have important roles in the biomineralization of shells. In this study, we isolated and identified a novel shell matrix protein gene, hic7, from the mussel Hyriopsis cumingii. The cDNA of hic7 was 459 bp long, including a 240-bp open reading frame. It encoded a 79 amino acid-long protein, with amino acids 1-19 constituting the signal peptide. The resulting hic7 is rich in cysteine (16.5%). After removing the signal peptide, the molecular weight was 8.85 kDa and the theoretical isoelectric point was 6.34, indicating that hic7 is a weakly acidic shell matrix protein. Hic7 is mainly expressed in the mantle tissue of H. cumingii. In situ hybridization showed hic7 signals at the edge and dorsal region of the mantle outer fold, indicating that it is related to the formation of the prismatic and nacreous layer of the shell. RNA interference indicated that when hic7 was inhibited by 80%, the crystal morphology of the prism and nacre layers of the shell were irregular and disordered. In addition, the expression of hic7 during the early development of the pearl sac indicated that it has an important role in the transformation of calcium carbonate crystals from a disordered to an orderly deposition pattern. These results suggest that matrix protein hic7 take part in constructing the framework of crystal nucleation and regulating the calcium carbonate crystal morphology of the nacreous and prismatic layers of shells and pearls.

Novel nanomaterial-organism hybrids with biomedical potential

Instinctive hierarchically biomineralized structures of various organisms, such as eggs, algae, and magnetotactic bacteria, afford extra protection and distinct performance, which endow fragile organisms with a tenacious ability to adapt and survive. However, spontaneous formation of hybrid materials is difficult for most organisms in nature. Rapid development of chemistry and materials science successfully obtained the combinations of organisms with nanomaterials by biomimetic mineralization thus demonstrating the reproduction of the structures and functions and generation of novel functions that organisms do not possess. The rational design of biomaterial-organism hybridization can control biological recognition, interactions, and metabolism of the organisms. Thus, nanomaterial-organism hybrids represent a next generation of organism engineering with great potential biomedical applications. This review summarizes recent advances in material-directed organism engineering and is mainly focused on biomimetic mineralization technologies and their outstanding biomedical applications. Three representative types of biomimetic mineralization are systematically introduced, including external mineralization, internal mineralization, and genetic engineering mineralization. The methods involving hybridization of nanomaterials and organisms based on biomimetic mineralization strategies are described. These strategies resulted in applications of various nanomaterial-organism hybrids with multiplex functions in cell engineering, cancer treatment, and vaccine improvement. Unlike classical biological approaches, this material-based bioregulation is universal, effective, and inexpensive. In particular, instead of traditional medical solutions, the integration of nanomaterials and organisms may exploit novel strategies to solve current biomedical problems. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease.

Biomineralized Biohybrid Algae for Tumor Hypoxia Modulation and Cascade Radio-Photodynamic Therapy

Biomineralization of biomaterials has shown extraordinary potential in cancer treatment, but the exploration of their in vivo applications is still insufficient. Here, we report a biohybrid microalgae system using a biomineralization approach to improve their biocompatibility, while keeping their living activities for radiation and photodynamic synergistic therapy in breast cancer. The biohybrid algae (Algae@SiO₂) synthesized by a one-step biomimetic silicification method could significantly enhance their cytotoxicity and tolerance, improving the living activity in the tumor area. The innate chlorophyll and unique optical property make Algae@SiO₂ possess dual imaging ability, namely, photoacoustic imaging and fluorescence imaging. Algae@SiO₂ accumulated in tumor sites could generate oxygen in situ by external light-mediated photosynthesis, relieve tumor hypoxia, and then enhance the efficiency of radiation therapy. As a natural photosensitizer, the released chlorophyll from Algae@SiO₂ could provide reactive oxygen species to kill the cancer cells for the cascaded photodynamic therapy. The significant suppression of tumor growth in the mice bearing 4T1 tumor successfully demonstrates the promising anti-tumor effect of the Algae@SiO₂-mediated synergistic therapy. Our results show that biohybrid algae, integrated with PAI/FI dual imaging, radiosensitization, and cascaded photothermal therapy, is a promising multifunctional efficient biosystem for cancer treatment.

Assembly of a patchy protein into variable 2D lattices via tunable multiscale interactions

Self-assembly of molecular building blocks into higher-order structures is exploited in living systems to create functional complexity and represents a powerful strategy for constructing new materials. As nanoscale building blocks, proteins offer unique advantages, including monodispersity and atomically tunable interactions. Yet, control of protein self-assembly has been limited compared to inorganic or polymeric nanoparticles, which lack such attributes. Here, we report modular self-assembly of an engineered protein into four physicochemically distinct, precisely patterned 2D crystals via control of four classes of interactions spanning Ångström to several-nanometer length scales. We relate the resulting structures to the underlying free-energy landscape by combining in-situ atomic force microscopy observations of assembly with thermodynamic analyses of protein-protein and -surface interactions. Our results demonstrate rich phase behavior obtainable from a single, highly patchy protein when interactions acting over multiple length scales are exploited and predict unusual bulk-scale properties for protein-based materials that ensue from such control.

As nanoscale building blocks, proteins offer unique advantages, including monodispersity and atomically tunable interactions, but their self-assembly is limited compared to inorganic or polymeric nanoparticles. Here, the authors show modular self-assembly of an engineered protein into four physicochemically distinct patterned 2D crystals via control of four classes of interactions.

Biomineralization of Bacteria by a Metal-Organic Framework for Therapeutic Delivery

Biomimetic mineralization of live organisms shows extraordinary promise in biotechnology. However, their therapeutic applications have been insufficiently explored. Herein, it is demonstrated that metal-organic framework (MOF)-engineered bacteria are powerful carriers for tumor-targeted therapeutic delivery. Specifically, Escherichia coli (MG1655) is coated with a zeolitic imidazolate framework-8 layer coloaded with a photosensitizer and chemical drug through a one-step in situ method. The as-prepared bacteria@MOF hybrid preserves its viability and tumor selectivity. It exhibits high therapeutic efficacy both in vitro and in vivo in a combined chemo-photodynamic manner. To the best of knowledge, this is the first report of engineered bacteria@MOFs for in vivo tumor treatment. This study opens a new horizon for the bioapplications of biomineralized organisms and may provide novel strategies against tumors.

Fluorescence and Optical Activity of Chiral CdTe Quantum Dots in Their Interaction with Amino Acids

Ligand-induced chirality in semiconducting nanocrystals has been the subject of extensive study in the past few years and shows potential applications in optics and biology. Yet, the origin of the chiroptical effect in semiconductor nanoparticles is still not fully understood. Here, we examine the effect of the interaction with amino acids on both the fluorescence and the optical activity of chiral semiconductor quantum dots (QDs). A significant fluorescence enhancement is observed for l/d-Cys-CdTe QDs upon interaction with all the tested amino acids, indicating suppression of nonradiative pathways as well as the passivation of surface trap sites brought via the interaction of the amino group with the CdTe QDs' surface. Heterochiral amino acids are shown to weaken the circular dichroism (CD) signal, which may be attributed to a different binding configuration of cysteine molecules on the QDs' surface. Furthermore, a red shift of both CD and fluorescence signals in l/d-Cys-CdTe QDs is only observed upon adding cysteine, while other tested amino acids do not exhibit such an effect. We speculate that the thiol group induces orbital hybridization of the highest occupied molecular orbital (HOMOs) of cysteine and the valence band of CdTe QDs, leading to the decrease of the energy band gap and a concomitant red shift of CD and fluorescence spectra. This is further verified by density functional theory calculations. Both the experimental and theoretical findings indicate that the addition of ligands that do not "directly" interact with the valence band (VB) of the QD (noncysteine moieties) changes the QD photophysical properties, as it probably modifies the way cysteine is bound to the surface. Hence, we conclude that it is not only the chemistry of the amino acid ligand that affects both CD and PL but also the exact geometry of binding that modifies these properties. Understanding the relationship between the QD's surface and chiral amino acid thus provides an additional perspective on the fundamental origin of induced chiroptical effects in semiconductor nanoparticles, potentially enabling us to optimize the design of chiral semiconductor QDs for chiroptic applications.

Synthesis of Diatomite-Based Mesoporous Wool-Ball-Like Microspheres and Their Application for Toluene Total Oxidation Reaction

Diatomite (DE) has attracted considerable attention owing to its abundance, low cost, and potential for a wide variety of applications. This work reports the development of mesoporous wool-ball-like (WBL) microspheres from natural DE through a simple hydrothermal treatment. We discovered that the presence of cetyltrimethylammonium bromide is a prerequisite for generating monodispersed WBL microspheres. The mechanism for the transformation of pristine DE into mesoporous microspheres through dissolution–recrystallization was clearly investigated. Interestingly, the microspheres exhibited a specific surface area 25–60 times larger than that of the pristine DE. The application of WBL microsphere DE as an effective support for metallic catalysts in the toluene total oxidation reaction was demonstrated.

Biomineralization of Carbonate Minerals Induced by The Moderate Halophile Staphylococcus Warneri YXY2

Although biomineralization of minerals induced by microorganisms has been widely reported, the mechanisms of biomineralization and the characteristics of the biominerals precipitated needs to be studied further. In this study, Staphylococcus warneri YXY2, a moderate halophile, was used to induce the precipitation of carbonate minerals at various Mg/Ca molar ratios. To investigate the biomineralization mechanism, the growth curve, pH changes, ammonia test, the concentration of bicarbonate and carbonate ions, and the activity of carbonic anhydrase (CA) and alkaline phosphatase (ALP) were determined. X-ray powder diffraction (XRD), scanning electron microscopy - energy disperse spectroscopy (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy (STEM), and stable carbon isotope analyses were used to characterize the minerals. The obtained biotic minerals were calcite, vaterite, Mg-rich calcite, and aragonite crystals. The crystallinity of aragonite decreased with increasing Mg/Ca ratios. The preferred orientation, diverse morphologies, organic substances, and more negative stable carbon isotope values proved the biogenesis of these carbonate minerals. The presence of Mg in the biotic aragonite crystals was likely related to the acidic amino acids which also facilitated the nucleation of minerals on/in the extracellular polymeric substances (EPS). Mg2+ and Ca2+ ions were able to enter into the YXY2 bacteria to induce intracellular biomineralization. Dynamics simulation using Material Studio software proved that different adsorption energies of Glutamic acid (Glu) adsorbed onto different crystal planes of aragonite led to the preferred orientation of aragonite. This study helps to deepen our understanding of biomineralization mechanisms and may be helpful to distinguish biotic minerals from abiotic minerals.

Strained calcite crystals from amorphous calcium carbonate containing an organic molecule

Strained calcite was produced from amorphous calcium carbonate (ACC) containing aspartic acid and characterized by Raman spectroscopy and nanoindentation.

Bioprospecting solid binding polypeptides for lithium ion battery cathode materials

Biotemplating presents a promising approach to improve the performance of inorganic materials via specific control over morphology, crystal structure, and the size of particles during synthesis and assembly. Among other biotemplates, solid binding polypeptides (SBPs) isolated for the material of interest provide high binding affinity and selectivity due to distinct combinations of functional groups found in amino acids. Nanomaterials assembled and synthesized with SBPs have found widespread applications from drug delivery to catalysis and energy storage due to their improved properties. In this study, the authors describe the identification of SBPs for binding to Li-ion battery cathode materials LiCoPO₄, LiMn_1.5Ni_0.5O₄, and LiMn₂O₄, which all have potential for improvement toward their theoretical values. The binding affinity of isolated peptides was assessed via phage binding assays and confirmed with electron microscopy in order to select for potential biotemplates. The authors demonstrate ten binding peptides for each material and analyze the sequences for enrichment in specific amino acids toward each structure (olivine and spinel oxide), as well as the test for specificity of selected sequences. In further studies, the authors believe that the isolated SBPs will serve as a template for synthesis and aid in assembly of cathode materials resulting in improved electrochemical properties for Li-ion batteries.

Electrically assisted 3D printing of nacre-inspired structures with self-sensing capability

Lightweight and strong structural materials attract much attention due to their strategic applications in sports, transportation, aerospace, and biomedical industries. Nacre exhibits high strength and toughness from the brick-and-mortar-like structure. Here, we present a route to build nacre-inspired hierarchical structures with complex three-dimensional (3D) shapes by electrically assisted 3D printing. Graphene nanoplatelets (GNs) are aligned by the electric field (433 V/cm) during 3D printing and act as bricks with the polymer matrix in between as mortar. The 3D-printed nacre with aligned GNs (2 weight %) shows lightweight property (1.06 g/cm³) while exhibiting comparable specific toughness and strength to the natural nacre. In addition, the 3D-printed lightweight smart armor with aligned GNs can sense its damage with a hesitated resistance change. This study highlights interesting possibilities for bioinspired structures, with integrated mechanical reinforcement and electrical self-sensing capabilities for biomedical applications, aerospace engineering, as well as military and sports armors.

Bioinspired Fabrication of DNA-Inorganic Hybrid Composites Using Synthetic DNA

Nucleic acid nanostructures have attracted significant interest as potential therapeutic and diagnostic platforms due to their intrinsic biocompatibility and biodegradability, structural and functional diversity, and compatibility with various chemistries for modification and stabilization. Among the fabrication approaches for such structures, the rolling circle techniques have emerged as particularly promising, producing morphologically round, flower-shaped nucleic acid particles: typically hybrid composites of long nucleic acid strands and inorganic magnesium pyrophosphate (Mg2PPi). These constructs are known to form via anisotropic nucleic acid-driven crystallization in a sequence-independent manner, rendering monodisperse and densely packed RNA or DNA-inorganic composites. However, it still remains to fully explore how flexible polymer-like RNA or DNA strands (acting as biomolecular additives) mediate the crystallization process of Mg2PPi and affect the structure and properties of the product crystals. To address this, we closely examined nanoscale details to mesoscopic features of Mg2PPi/DNA hybrid composites fabricated by two approaches, namely rolling circle amplification (RCA)-based in situ synthesis and long synthetic DNA-mediated crystallization. Similar to the DNA constructs fabricated by RCA, the rapid crystallization of Mg2PPi was retarded on a short-range order when we precipitated the crystals in the presence of presynthesized long DNA, which resulted in effective incorporation of biomolecular additives such as DNA and enzymes. These findings further provide a more feasible way to encapsulate bioactive enzymes within DNA constructs compared to in situ RCA-mediated synthesis, i.e., by not only protecting them from possible denaturation under the reaction conditions but also preventing nonselective association of proteins arising from the RCA reaction mixtures.

Spatially Controlled Occlusion of Polymer-Stabilized Gold Nanoparticles within ZnO

In principle, incorporating nanoparticles into growing crystals offers an attractive and highly convenient route for the production of a wide range of novel nanocomposites. Herein we describe an efficient aqueous route that enables the spatially controlled occlusion of gold nanoparticles (AuNPs) within ZnO crystals at up to 20 % by mass. Depending on the precise synthesis protocol, these AuNPs can be (i) solely located within a central region, (ii) uniformly distributed throughout the ZnO host crystal or (iii) confined to a surface layer. Remarkably, such efficient occlusion is mediated by a non-ionic water-soluble polymer, poly(glycerol monomethacrylate)₇₀ (G₇₀ ), which is chemically grafted to the AuNPs; pendent cis-diol side groups on this steric stabilizer bind Zn²⁺ cations, which promotes nanoparticle interaction with the growing ZnO crystals. Finally, uniform occlusion of G₇₀ -AuNPs within this inorganic host leads to faster UV-induced photodegradation of a model dye.

Inorganic semiconductor biointerfaces

Biological systems respond to and communicate through biophysical cues, such as electrical, thermal, mechanical and topographical signals. However, precise tools for introducing localized physical stimuli and/or for sensing biological responses to biophysical signals with high spatiotemporal resolution are limited. Inorganic semiconductors display many relevant electrical and optical properties, and they can be fabricated into a broad spectrum of electronic and photonic devices. Inorganic semiconductor devices enable the formation of functional interfaces with biological material, ranging from proteins to whole organs. In this Review, we discuss fundamental semiconductor physics and operation principles, with a focus on their behaviour in physiological conditions, and highlight the advantages of inorganic semiconductors for the establishment of biointerfaces. We examine semiconductor device design and synthesis and discuss typical signal transduction mechanisms at bioelectronic and biophotonic interfaces for electronic and optoelectronic sensing, optoelectronic and photothermal stimulation and photoluminescent in vivo imaging of cells and tissues. Finally, we evaluate cytotoxicity and highlight possible new material components and biological targets of inorganic semiconductor devices.

Topochemical Engineering of Cellulose-Based Functional Materials

Topochemical engineering is a method of designing the fractionation (disassembly) and fabrication (assembly) of highly engineered functional materials using a combination of molecular and supramolecular techniques. Cellulose is one of the naturally occurring biopolymers, currently considered to be an important raw material for the design and development of sustainable products and processes. This feature article deals with new insights into how cellulose can be processed and functionalized using topochemical engineering in order to create functional fibers, enhance biopolymer dissolution in water-based solvents, and control the shaping of porous materials. Subsequently, topochemical engineering of cellulose offers a variety of morphological structures such as highly engineered fibers, functional cellulose beads, and reactive powders that find relevant applications in pulp bleaching, enzyme and antimicrobial drug carriers, ion exchange resins, photoluminescent materials, waterproof materials, fluorescent materials, flame retardants, and template materials for inorganic synthesis. The topochemical engineering of biopolymers and biohybrids is an exciting and emerging area of research that can boost the design of new bioproducts with novel functionalities and technological advancements for biobased industries.