Design of fluorescent method for sensing toxic diazinon in water samples using PbS quantum dots-based gelatin

In this current article, a chemical sensor was synthesized PbS functionalized with gelatin quantum dots for toxic diazinon. The measure of toxic diazinon was performed using concentration 0.5 µM, PbS quantum dot-gelatin nanocomposites sensor, pH 6, and time 50 s, wavelength 300 nm, in phosphate buffer solution. Under the optimum conditions, the detection limit linear range was obtained (0.01-20.0 µg L^-1). The standard deviation of less than (1.0%), and detection limits (3S/m) of the method (0.01 µg L^-1) and quantification (LOQ) of (0.099 µg L^-1), for determination of toxic diazinon, was obtained. The observed outcomes confirmed the suitability recovery and a very low detection limit for measuring the toxic diazinon. The Chemical PbS Quantum Dot-Gelatin nanocomposites sensor as excellent sensor was applied to measure and analyze residue toxic diazinon in water samples.

Enhanced fluorescent sensing probe via PbS quantum dots functionalized with gelatin for sensitive determination of toxic bentazon in water samples

Fluorescent chemical sensors to detect materials, by increasing fluorescence emission and absorption or by shutting down, because they are nondestructive, the ability to show decomposed concentrations, fast response, high accuracy have been considered and used. In this research, a chemical sensor was synthesized PbS functionalized with gelatin quantum dots for the determination of toxic bentazon (BTZN) one of the most problematic pesticides polluting in water samples, and extremely harmful to humans and animals even at low concentrations. The calibration curve was linear in the range of (0.05 to 200.0 ng mL^-1). The current response was linearly proportional to the BTZN concentration with a R²∼ 0.999. The standard deviation of less than (3%), and detection limits (3S/m) of the method (0.5 ng mL^-1, in time 50 s, 325 nm) were obtained for sensor level response PbS Quantum Dot-Gelatin nanocomposites sensor with (99%) which is below the U.S. Health Advisory level. The observed outcomes confirmed the suitability recovery and a very low detection limit for measuring the BTZN. The method fluorometric introduced to measure BTZN in water samples was used and can be used for in different intricate matrices, the chemical PbS Quantum Dot-Gelatin nanocomposites sensor made it possible as an excellent sensor with good reproducibility.