Laminate veneer ceramics in aesthetic rehabilitation of teeth with fluorosis: a 10-year follow-up study

Clinical performance of laminate veneers: A review of the literature

PURPOSE

This narrative review aimed to survey the clinical outcomes of laminate veneers (LVs), including their survival and success rates.

STUDY SELECTION

An electronic search of MEDLINE/PubMed, Web of Science, Cochrane Library, and Google Scholar from 2000 to April 2023 was conducted using the keywords "laminate" OR "veneer" OR "porcelain" OR "feldspathic" OR "lithium disilicate" OR "composite resin" OR "zirconia" OR "survival" OR "success." Case reports, case series, reviews, abstracts, in vitro studies, and observational studies were excluded. Five researchers independently evaluated the titles and abstracts of all identified studies.

RESULTS

A total of 55 studies were identified. None of the studies met the criteria for zirconia LVs. According to the studies in this review, LVs fabricated with feldspathic porcelain, leucite-reinforced glass ceramics (LRG), and lithium disilicate ceramics (LDS) exhibited satisfactory survival and success rates. Furthermore, hydrofluoric acid etching followed by silane priming of the surface of ceramic LVs is necessary for improved clinical outcomes. The extent of dentin exposure significantly decreases the success rate of ceramic LVs. An appropriate adhesive luting process is required to achieve the long-term success of ceramic LVs. Dentin exposure should be minimized or sealed during tooth preparation to achieve a reliable and durable bond between LVs and abutment teeth.

CONCLUSIONS

Based on this narrative review of the literature, the use of silica-based ceramic feldspathic porcelain, LRG, and LDS is recommended for LVs.

Clinical Survival Rate and Laboratory Failure of Dental Veneers: A Narrative Literature Review

There is a vast amount of published literature concerning dental veneers; however, the effects of tooth preparation, aging, veneer type, and resin cement type on the failure of dental veneers in laboratory versus clinical scenarios are not clear. The purpose of the present narrative review was to determine the principal factors associated with failures of dental veneers in laboratory tests and to understand how these factors translate into clinical successes/failures. Articles were identified and screened by the lead author in January 2024 using the keywords ''dental veneer", "complication", "survival rate", "failure", and "success rate" using PubMed/Medline, Scopus, Google Scholar, and Science Direct. The inclusion criteria included articles published between January 1999 and January 2024 on the topics of preparation of a tooth, aging processes of the resin cement and veneer, translucency, thickness, fabrication technique of the veneer; shade, and thickness of the resin cement. The exclusion criteria included articles that discussed marginal and internal fit, microhardness, water sorption, solubility, polishability, occlusal veneers, retention, surface treatments, and wear. The results of the present review indicated that dental veneers generally have a high survival rate (>90% for more than 10 years). The amount of preserved enamel layer plays a paramount role in the survival and success rates of veneers, and glass-ceramic veneers with minimal/no preparation showed the highest survival rates. Fracture was the primary failure mechanism associated with decreased survival rate, followed by debonding and color change. Fractures increased in the presence of parafunctional activities. Fewer endodontic complications were associated with veneer restorations. No difference was observed between the maxillary and mandibular teeth. Clinical significance: Fractures can be reduced by evaluation of occlusion immediately after cementation and through the use of high-strength veneer materials, resin cements with low moduli, and thin layers of highly polished veneers. Debonding failures can be reduced with minimal/no preparation, and immediate dentin sealing should be considered when dentin is exposed. Debonding can also be reduced by preventing contamination from blood, saliva, handpiece oil, or fluoride-containing polishing paste; through proper surface treatment (20 s of hydrofluoric acid etching for glass ceramic followed by silane for 60 s); and through use of light-cured polymerization for thin veneers. Long-term color stability may be maintained using resin cements with UDMA-based resin, glass ceramic materials, and light-cure polymerization with thin veneers.

The Effect of Various Preparation and Cementation Techniques of Dental Veneers on Periodontal Status: A Systematic Review and Meta-Analysis

Dental veneers are widely used to restore or/and enhance dental aesthetics. However, it is not well understood how various veneer preparation and cementation methods affect periodontal health. To provide a quantitative estimate of the overall effect size of the intervention, this study was conducted to synthesize the available evidence on the impact of various dental veneer preparation and cementation methods on periodontal status. A thorough search strategy was implemented using Medical Subject Headings keywords and Boolean operators across various major databases, guided by the Preferred Reporting Items for Systematic Reviews and Meta-Analyses protocol. Nine papers were ultimately selected for inclusion in the review. Seven studies demonstrated a positive impact of dental veneers on overall periodontal health, while two studies reported a slight worsening. The forest plot analyses showed a somewhat protective effect of dental veneers on periodontal health, with odds ratio of 0.18 and relative risk of 0.34, suggesting that dental veneers may have a positive impact on overall periodontal health. The current study, with considerable heterogeneity among the studies, indicates that dental veneers are associated with an overall positive effect on the periodontal health. However, given the variations in study designs, sample sizes, and follow-up times, additional research may be required to confirm and generalize these results.

Clinical outcomes of self-glazed zirconia veneers produced by 3D gel deposition: a retrospective study

BACKGROUND

Self-glazed zirconia (SZ) restorations are made by a novel additive three-dimensional gel deposition approach, which are suitable for a straightforward completely digital workflow. SZ has recently been used as minimally invasive veneer, but its clinical outcomes have not been clarified yet. This study aimed to evaluate the preliminary clinical outcomes of SZ veneers compared with the widely used lithium disilicate glass-ceramic veneers made by either pressing (PG) or milling (MG) process.

METHODS

Fifty-six patients treated with SZ, PG, and MG veneers by 2 specialists between June 2018 and October 2022 were identified. Patients were recalled for follow-up at least 1 year after restoration. Clinical outcomes were assessed by 2 independent evaluators according to the modified United States Public Health Service (USPHS) criteria. Overall patient satisfaction was assessed using visual analogue scale (VAS), and analyzed by one-way ANOVA. Chi-square test was applied to compare the difference in the success and survival rates among the 3 groups.

RESULTS

A total of 51 patients restored with 45 SZ, 40 PG, and 41 MG veneers completed the study, with a patient dropout rate of 8.9%. Mean and standard deviation of follow-up period was 35.0 ± 14.7 months. All restorations performed well at baseline, except for 2 SZ veneers with mismatched color (rated Bravo). During follow-up, marginal discrepancy (rated Bravo) was found in 4 MG veneers and 1 PG veneer, and partially fractured (rated Charlie) was found in another 2 PG veneers. The survival rate of SZ, PG, and MG veneers was 100%, 95%, and 100%, with a success rate of 95.56%, 92.50%, and 90.24%, respectively, none of which were significantly different (p = 0.099 and 0.628, respectively). The mean VAS score of SZ, PG, and MG was 95.00 ± 1.57, 93.93 ± 2.40, and 94.89 ± 2.00 respectively, without significant difference (p > 0.05).

CONCLUSION

SZ veneers exhibited comparable preliminary clinical outcomes to PG and MG veneers, which could be considered as a feasible option for minimally invasive restorative treatment.

Componeer as an aesthetic treatment option for anterior teeth: a case report

INTRODUCTION

Structural abnormalities or anomalies in the anterior teeth, also known as the aesthetic zone, are an important problem for patients and a challenge for dentists. Structural abnormalities or tooth anomalies can change in color, shape, and function. Most dentists prefer minimally invasive aesthetic treatment. One of the aesthetic treatment options for anterior teeth is veneers. Veneer is a restoration that covers the labial part of the tooth with a thin layer of material to correct abnormalities in the color, shape, or function of the tooth. Veneer restoration can be done indirectly with porcelain material made in a laboratory and directly with composite material on the tooth surface or prefabricated which is available from the factory. Componeer is a prefabricated composite veneer that combines the aesthetic properties of ceramic veneers and the adhesive ability of composite veneers to the tooth structure. This case report describes the treatment of two central incisors that had been filled with composite and peg shapes on both lateral incisors using a componeer.

CASE REPORT

A 32-year-old female patient came to the Dental Conservation Clinic at Dentistry Hospital, Padjadjaran University with the main complaint of her right and left upper front teeth and wanted to repair her old fillings and close the gap between her right and left upper front teeth and her canine teeth. Clinical examination showed that teeth 11 and 21 had been filled with composite which had changed color and had an inharmonious shape as well as a gap between the upper front teeth on the right and left sides and the right and left canine teeth.

TREATMENT

The maxilla and mandibular teeth are molded for study models and working models. In the working model, a wax-up is carried out, then a mock-up on the patient's teeth. Next, choose the color and size of the components that match the mock up results. Teeth 11 and 21 had their old composite fillings cleaned and refilled with dentin colored composite, teeth 13, 12, 11, 21, 22, and 23 were prepared with a minimum thickness of 0.3 mm to make room for the componeer material. The teeth was etched and bonded, and bonding was applied to the inner surface of the componeer. The composite is placed on the inner surface of the componeer then placed on the labial surface of the tooth and pressed with a special tool, then light cured. The final step is polishing.

TREATMENT RESULTS

Teeth 13, 12, 11, 21, 22, and 23 which had undergone veneer treatment using componeer, were controlled after 1 week of treatment. The patient did not complain about the results of the treatment and said he was satisfied with the treatment.

Aesthetic impact of resin infiltration and its mechanical effect on ceramic bonding for white spot lesions

BACKGROUND

Treating white spot lesions (WSLs) with resin infiltration alone may not be sufficient, raising questions about its compatibility with other treatments amid controversial or incomplete data. Therefore, this study aimed to assess the aesthetic feasibility of resin infiltration combined with bleaching, as well as its potential mechanical effect on ceramic bonding to WSLs.

METHODS

One hundred and fifty flat enamel surfaces of bovine incisors were prepared. Ninety specimens were deminerailized and randomly assigned to three groups(n = 30): post-bleaching resin infiltration (Bl-R), pre-bleaching resin infiltration (R-Bl), and only resin infiltration (R). Color, surface roughness and microhardness were assessed in immediate, thermocycling and pigmentation tests. The remaining sixty samples were randomly assigned to three groups (n = 20): control (Ctrl), bonding (Bo), pre-bonding resin infiltration (R-Bo). Shear bonding strength, failure mode, micro-leakage depth and interface morphology were evaluated after ceramic bonding. The Tukey test and analysis of variance (ANOVA) were used for statistical analysis.

RESULTS

For the effect of resin infiltration and bleaching on WSLs, the R-Bl group showed the worst chromic masking ability, with the highest |ΔL|, |Δa|, |Δb|, and ΔE values after treatment. Compared with those in the Bl-R group, the R-Bl and R groups showed significant time-dependent staining, which is possibly attributed to their surface roughness. For the effect of resin infiltration on the adhesive properties of WSLs, resin infiltration reduced the staining penetration depth of WSLs from 2393.54 ± 1118.86 μm to 188.46 ± 89.96 μm (P < 0.05) while reducing WSLs porosity in SEM observation.

CONCLUSIONS

Post-bleaching resin infiltration proved to be advantageous in the aesthetic treatment of WSLs. Resin infiltration did not compromise bonding strength but it did reduce microleakage and enhance marginal sealing. Overall, resin infiltration can effectively enhance the chromatic results of treated WSLs and prevent long-term bonding failure between ceramics and enamel. Based on these findings, the use of post-bleaching resin infiltration is recommended, and resin infiltration before ceramic bonding is deemed viable in clinical practice.

Two-year evaluation of porcelain laminate veneers using FDI criteria

PURPOSE

The use of porcelain laminate veneers (PLVs) is a minimally invasive technique that is often used in restorative dentistry due to esthetic considerations. The aim of this study was to evaluate PLVs according to the Fédération Dentaire Internationale (FDI) World Dental Federation clinical criteria.

MATERIALS AND METHODS

This clinical study included 11 patients (7 female and 4 male) who had been admitted to the Uşak University Faculty of Dentistry between February 2019 and February 2021. Before taking part in the study, patients were informed about alternative treatment procedure options. A total of 30 PLVs were fabricated and cemented, and patients were evaluated according to the FDI criteria (with a follow-up after 2 years).

RESULTS

Restorations were evaluated by two trained researchers. During the follow-up evaluation, no fractures or cracks were observed in any restoration. Further, 73% (n = 22) of the PLVs had perfect marginal adaptation and only 27% (n = 8) had small marginal fractures that could be removed by polishing. Moreover, 57% (n = 17) of the PLVs were evaluated as a good color match (no difference in shade and/or translucency), whereas 33% (n = 13) had only minor deviations. In periodontal examinations, 23% (n = 7) of the PLVs had no plaque, inflammation, or pockets, whereas 77% (n = 23) had minor plaque inflammation and no pocket development.

CONCLUSIONS

As there were no fractures, fails, or need for removal of the restorations after 2 years, PLVs showed clinically satisfactory performance. The performance of PLVs can be considered highly favorable due to the minimally invasive and periodontally-compatible nature, with a good color match when carefully planned.

Printed Digital Wax-up Model as a Blueprint for Layered Pressed-ceramic Laminate Veneers: Technique Description and Case Report

This article presents a clinical technique for transferring Digital Smile Design (DSD) information and a digital wax-up to fabricate highly personalized ceramic laminate veneers. The hybrid workflow of digitally designed wax-up and conventional hand-crafted veneers is showcased in a female adult who sought to improve her smile due to maxillary anterior incisal wear. The ceramic veneers, layered by feldspathic porcelain, followed the contours and shade blueprint planned with the digital wax-up. The DSD improved the harmony of the facial-and-smile relationship, and the ceramic restorations fulfilled the patient's esthetic and functional demands. Guides based on the printed model with the digitally designed wax-up can provide a reference for pressed lithium disilicate veneers layered with feldspathic porcelain.

In vivo real-time assessment of developmental defects in enamel of anti-Act1 mice using optical coherence tomography

The purpose of this study was to explore the feasibility of using optical coherence tomography (OCT) for real-time and quantitative monitoring of enamel development in gene-edited enamel defect mice. NF-κB activator 1, known as Act1, is associated with many inflammatory diseases. The antisense oligonucleotide of Act1 was inserted after the CD68 gene promoter, which would cover the start region of the Act1 gene and inhibit its transcription. Anti-Act1 mice, gene-edited mice, were successfully constructed and demonstrated amelogenesis imperfecta by scanning electron microscope (SEM) and energy dispersive X-ray (EDX) spectroscopy. Wild-type (WT) mice were used as the control group in this study. WT mice and anti-Act1 mice at 3 weeks old were examined by OCT every week and killed at eight weeks old. Their mandibular bones were dissected and examined by OCT, micro-computed tomography (micro-CT), and SEM. OCT images showed that the outer layer of enamel of anti-Act1 mice was obviously thinner than that of WT mice but no difference in total thickness. When assessing enamel thickness, there was a significant normal linear correlation between these methods. OCT could scan the imperfect developed enamel noninvasively and quickly, providing images of the enamel layers of mouse incisors.