Dual energy X-ray absorptiometry of the calcaneus: comparison with other techniques to assess bone density and value in predicting risk of spine fracture

Bone Quality in Patients with Parkinson's Disease Determined by Quantitative Ultrasound (QUS) of the Calcaneus: Influence of Sex Differences

(1) Background: Parkinson’s disease (PD) is a relatively common neurodegenerative disease in elderly individuals, with a high risk of falls. There is abundant literature on the relationship between PD and osteoporosis. The aim of this study is to describe the bone quality of a population with PD by calcaneal ultrasound and to compare it with a healthy control, assessing the influence of possible sex differences. (2) Methods: 21 patients diagnosed with PD were recruited. The control group was composed of 30 healthy individuals with similar sociodemographic characteristics. The bone quality of all participants was assessed using calcaneal quantitative ultrasound (QUS). The parameters recorded were broadband ultrasound attenuation (BUA, in decibels per megahertz), imaging speed of sound (SOS, in meters per second), stiffness index (SI) and T-score of each participant. Bone mineral density (BMD) was estimated using the equation BMD = 0.002592 × (BUA + SOS) − 3.687 (g/cm2). (3) Results: significant differences were observed between the healthy control and the PD group: the T-score was lower in the PD group (p < 0.05) and SOS was higher in Parkinson’s disease patients (p < 0.05), while 28.6% of the PD patients were osteoporotic with T-score values lower than −1.5 compared to 16.7% of osteoporotic individuals in the control group (p < 0.01). Regarding the sex, there were significant differences (p < 0.05) between the females of the PD group vs. control group, showing a significant difference in the SI (71.4 ± 14.7 vs. 87.8 ± 12), T-score (−2.19 ± 1.1 vs. −0.15 ± 0.8), BUA (104.5 ± 13 vs. 116 ± 10.6) and BMD (0.49 ± 0.09 vs. 0.60 ± 0.08), with no difference in the comparison between the male groups; and the comparison between both sexes in T-score only showed significant differences for the PD group (p < 0.05), with worse bone quality in women. (4) Conclusions: this study shows poorer bone quality in female patients with PD, who have a higher percentage of osteoporosis than healthy patients. The QUS technique of the calcaneus seems adequate for these determinations in patients with Parkinson’s disease.

Ultimate Load Measuring System for Fixation of Soft Tissue to Bone

BACKGROUND

The initial ultimate load for graft fixation is one of the essential factors in the reconstruction of lateral ankle ligaments. Several anchoring devices have been developed to fix the substitute ligament into the bone. A fair comparison of these fixation methods warrant a reproducible examination system. The purpose of this study was to make an experimental animal model and to compare the initial ultimate loads of 3 graft fixation methods, including the use of EndoButton (EB), interference screw (IFS), and a novel socket anchoring (SA) technique.

METHODS

Porcine calcaneus bones and 5-mm-wide split bovine Achilles tendons were used as fixation bases and graft materials, respectively. Both ends were firmly sutured side-by-side, using the circumferential ligation technique as a double-strand substitute that was 45 mm in length. Porcine calcanei with similar characteristics to adult human calcanei were mounted on a tensile testing machine, and substitutes were fixed into bones using the 3 fixation methods. A polyester tape was passed through the tendon loop and connected to a crosshead jig of the testing machine. The initial ultimate loads were measured in 15 specimens for each fixation method to simulate a lateral ankle ligament (LAL) injury.

RESULTS

The ultimate loads (ULs) were 223.6 ± 52.7 N for EB, 229.7 ± 39.7 N for SA, and 208.8 ± 65.3 N for IFS. No statistically significant difference was observed among the 3 groups (P = .571). All failures occurred at the bone-ligament substitute interface.

CONCLUSION

The initial ULs in all 3 fixation methods were sufficient for clinical usage. These values were larger than the UL of the anterior talofibular ligament; however, these were smaller than the UL of the calcaneofibular ligament.

CLINICAL RELEVANCE

In an experimental animal model, ULs for SA, EB, and IFS techniques showed no significant difference. All failures were observed in the fixation site of the calcaneus and were overwhelmingly related to suture fixation failure.

Comparison of modern locked plating and antiglide plating for fixation of osteoporotic distal fibular fractures

BACKGROUND

Fractures in osteoporotic patients can be difficult to treat because of poor bone quality and inability to gain screw purchase. The purpose of this study is to compare modern lateral periarticular distal fibula locked plating to antiglide plating in the setting of an osteoporotic, unstable distal fibula fracture.

METHODS

AO/OTA 44-B2 distal fibula fractures were created in sixteen paired fresh frozen cadaveric ankles and fixed with a lateral locking plate and an independent lag screw or an antiglide plate with a lag screw through the plate. The specimens underwent stiffness, cyclic loading, and load to failure testing. The energy absorbed until failure, torque to failure, construct stiffness, angle at failure, and energy at failure was recorded.

RESULTS

The lateral locking construct had a higher torque to failure (p=0.02) and construct stiffness (p=0.04). The locking construct showed a trend toward increased angle at failure, but did not reach statistical significance (p=0.07). Seven of the eight lateral locking plate specimens failed through the distal locking screws, while the antiglide plating construct failed with pullout of the distal screws and displacement of the fracture in six of the eight specimens.

CONCLUSION

In our study, the newly designed distal fibula periarticular locking plate with increased distal fixation is biomechanically stronger than a non-locking one third tubular plate applied in antiglide fashion for the treatment of AO/OTA 44-B2 osteoporotic distal fibula fractures.

LEVEL OF EVIDENCE

V: This is an ex-vivo study performed on cadavers and is not a study performed on live patients. Therefore, this is considered Level V evidence.

Epidemiology of Vertebral Fractures

Vertebral fractures are one of the most common fractures associated with skeletal fragility and can cause as much morbidity as hip fractures. However, the epidemiology of vertebral fractures differs from that of osteoporotic fractures at other skeletal sites in important ways, largely because only one quarter to one-third of vertebral fractures are recognized clinically at the time of their occurrence and otherwise require lateral spine imaging to be recognized. This article first reviews the prevalence and incidence of clinical and radiographic vertebral fractures in populations across the globe and secular trends in the incidence of vertebral fracture over time. Next, associations of vertebral fractures with measures of bone mineral density and bone microarchitecture are reviewed followed by associations of vertebral fracture with various textural measures of trabecular bone, including trabecular bone score. Finally, the article reviews clinical risk factors for vertebral fracture and the association of vertebral fractures with morbidity, mortality, and other subsequent adverse health outcomes.

Association between low cortical bone mineral density, soft-tissue calcification, vascular calcification and chondrocalcinosis: a case-control study

OBJECTIVES

To examine the association between bone mineral density (BMD), soft-tissue calcification, vascular calcification and chondrocalcinosis (CC).

METHODS

A case-control study within the Genetics of Osteoarthritis and Lifestyle (GOAL) database (n=3170). All GOAL participants completed a questionnaire self-reporting current and early adult life exposures. Radiographs of knees, hands and pelvis were scored for osteoarthritis (OA), CC, pelvic vascular calcification, peri-articular knee calcification and metacarpal index (MCI-measure of cortical BMD). Calcaneal dual-energy X-ray absorptiometry (DEXA) was performed. Cases had radiographic CC, while controls did not have CC at any radiographed site. OR, 95% CI were used to measure association between risk factors and CC. Logistic regression was used to adjust for confounding and to estimate the adjusted OR (aOR).

RESULTS

Low MCI (aOR (95%) for CC in 1st tertile 1.41 (1.06 to 1.89), with 3rd tertile referent), soft-tissue calcification (aOR (95%) for CC 1.81 (1.36 to 2.42)), and vascular calcification (aOR (95%) for CC 1.76 (1.13 to 2.75)) independently associated with CC. There was a negative association between body mass index and CC (aOR (95%) for CC in 2nd and 3rd tertiles 0.68 (0.53 to 0.89), and 0.67 (0.51 to 0.88) respectively with 1st tertile referent). Age and OA associated with CC. However, only age and low MCI independently associated with CC at >1 joint. Self-reported meniscectomy, low cortical BMD, vascular calcification, and soft-tissue calcification independently associated with knee CC.

CONCLUSIONS

This study identifies several novel associations of CC including low cortical BMD. The association between vascular calcification, soft-tissue calcification, and CC suggests a generalised constitutional predisposition to calcium crystal formation.

A comprehensive bone-health management approach for men with prostate cancer receiving androgen deprivation therapy

For advanced and metastatic prostate cancer, androgen deprivation therapy (adt) is the mainstay of treatment. Awareness of the potential bone-health complications consequent to adt use is increasing. Many studies have shown that prolonged adt leads to significant bone loss and increased fracture risk that negatively affect quality of life. Clinical practice guidelines for preserving bone health in men with prostate cancer on adt vary across Canada. This paper reviews recent studies on bone health in men with prostate cancer receiving adt and the current evidence regarding bone-health monitoring and management in reference to Canadian provincial guidelines. Based on this narrative review, we provide general bone-health management recommendations for men with prostate cancer receiving adt.

Informatics in radiology: use of a macro scripting editor to facilitate transfer of dual-energy X-ray absorptiometry reports into an existing departmental voice recognition dictation system

The process of verbally reporting or manually retyping numeric data generated at dual-energy x-ray absorptiometry (DXA) involves numerous pitfalls. With use of a macro scripting editor, a customized macro was created to automate the transfer of data generated by a DXA scanner into a structured voice recognition dictation system without requiring radiologists to type in a medical record number or accession number to identify the study. A preliminary report is generated with use of software for a DXA unit and a customized template that includes numeric and qualitative assessments of osteoporosis as well as data from prior studies if available. A customized macro is then invoked by the macro scripting editor, which selectively transfers the report from the draft document into the voice recognition dictation system, thereby producing a final structured diagnostic report. All of the radiologists surveyed to evaluate this automated method reported ease of software use and greater efficiency in report production. In addition, a random audit of the 800 DXA scans that have been reported with this technique demonstrated no reports generated under an incorrect accession number and no incorrect transfer of data. Automated DXA reporting is now the preferred method of dictation at the authors' institution and represents an inexpensive, accurate, and customizable means of DXA reporting.

A displaced stress fracture of the femoral neck in an adolescent female distance runner with female athlete triad: A case report

This report presents a case of a displaced stress fracture of the femoral neck in an adolescent female distance runner with amenorrhea. Both reduction and internal fixation were performed early after the injury. At 24 months postoperatively, magnetic resonance imaging and bone scintigraphy showed no positive signs of femoral head necrosis and bone union was confirmed on plain X-ray. A medical examination for the presence of the signs of the female athlete triad by checking weight, calorie intake and menstrual cycles is most important to prevent such stress fractures. Athletes as well as their coaches or parents therefore need to understand female athlete triad.

Volumetric quantitative CT of the spine and hip derived from contrast-enhanced MDCT: conversion factors

OBJECTIVE

The purposes of this study were to perform volumetric quantitative CT (QCT) of the spine and hip using nondedicated contrast-enhanced standard MDCT data sets and to derive a conversion factor for bone mineral density (BMD) assessment based on dedicated volumetric QCT data sets.

SUBJECTS AND METHODS

Forty postmenopausal women with a mean +/- SD age of 71 +/- 9 years underwent routine contrast-enhanced abdominal and pelvic MDCT. Before this imaging examination, standard volumetric QCT of the spine (L1-L3, n = 40) and hip (n = 21) was performed. Relations between QCT and contrast-enhanced MDCT findings were assessed with linear regression analysis.

RESULTS

Mean lumbar BMD was 84.1 +/- 35.8 mg/mL, and mean femoral BMD was 0.62 +/- 0.12 g/cm2, as determined with QCT. Contrast-enhancement values with MDCT were on average 30.3% higher than those of QCT in the spine and 2.3% higher in the proximal femur (p < 0.05). Based on linear regression, a correlation coefficient of r = 0.98 was calculated for lumbar BMD with the equation BMD(QCT) = 0.96xBMD(MDCT) - 20.9 mg/mL. A coefficient of r = 0.99 was calculated for the proximal femur with the equation BMD(QCT) = 0.99xBMD(MDCT) - 12 mg/cm2 (p < 0.01). In 17 of 40 patients, 33 vertebral fractures were found. The dedicated QCT and enhanced MDCT data sets did not show a significant difference (p > 0.05) between patients with fractures and those without fractures.

CONCLUSION

With the conversion factors, reliable volumetric BMD measurements can be calculated for the hip and the spine from routine abdominal and pelvic MDCT data sets.

New imaging technologies in the diagnosis of osteoporosis

In the context of osteoporosis, bone quality--which encompasses trabecular and cortical micro-architecture, mass, and tissue mechanical & compositional properties--plays an important and as yet undiscovered role. Non-invasive assessment of bone quality has recently received considerable attention, as bone density alone has not been able to predict existing or future osteoporotic fractures, or to explain therapeutic effects of emerging treatments. The goal of this review, therefore, is to present imaging modalities and related analysis methods capable of assessing bone quality for improved diagnosis and care of osteoporotic individuals. The techniques described include quantitative ultrasound, quantitative computed tomography, peripheral quantitative tomography, micro computed tomography, magnetic resonance, radiographic texture analysis, as well as finite element analysis based on the above-mentioned imaging modalities. The performance of these techniques in predicting osteoporotic fracture and assessing strength indices are discussed.

Influence of age and osteoporosis on calcaneus trabecular bone structure: a preliminary in vivo MRI study by quantitative texture analysis

Recent developments in high-resolution MR imaging techniques have opened up new perspectives for structural characterization of trabecular bone by non-invasive methods. In this study, 3-D MR imaging was performed on 17 healthy volunteers and 6 osteoporotic patients. Two different MR sequences were used to evaluate the impact on MR acquisition on texture analysis results. Images were analyzed with four automated methods of texture analysis (grey level histogram, cooccurrence, runlength and gradient matrices) enabling quantitative analysis of grey level intensity and distribution within three different regions of interest (ROI). Texture analysis is not very frequently used since the interpretation of the large number of calculated parameters is difficult. We applied multiparametric data analyses such as principal component analysis (CFA) and hierarchical ascending classification (HAC) to determine the relevant parameters to differentiate between three sets of images (healthy young volunteers, healthy postmenopaused and osteoporotic patients). The results suggest that relevant texture information (depending on the ROI localization in the calcaneus) can be extracted from calcaneus MR images to evaluate osteoporosis and age effects on trabecular bone structure if strictly the same acquisition sequences are used for all patients' examination.

Leisure physical activity is associated with quantitative ultrasound measurements independently of bone mineral density in postmenopausal women

The purpose of this study was to assess the magnitude of the relationship between leisure physical activity and bone status as measured either by an Achilles ultrasound bone densitometer (QUS) or dual-energy X-ray absorptiometry (DXA) in postmenopausal women. We studied 1162 French Canadian postmenopausal women, aged 33-84 years (mean age 58 years), for QUS parameters [broadband ultrasound attenuation (BUA), speed of sound (SOS), and stiffness index (SI)] measured at the right calcaneus, and bone mineral density (BMD) measured at the lumbar spine and femoral neck. Multivariate regression analyses revealed that leisure physical activity level was an independent predictor of the heel QUS parameters and of femoral neck BMD. No such association was observed for BMD of the lumbar spine. Heel QUS parameters (BUA, SOS, SI) and femoral neck BMD adjusted for interfering covariables showed a statistically significant difference between sedentary (less than three sessions/month) and active women (three or more sessions/week) (P < or = 0.001). Furthermore, after adjusting each heel QUS parameters for the mean lumbar spine BMD value, the association observed between leisure physical activity and QUS remained significant. These results suggest that regular leisure physical activity could influence QUS parameters, independently of BMD, and that quantitative ultrasound could be a suitable outcome measure in exercise studies in postmenopausal women.

Tendon transfer fixation in the foot and ankle: a biomechanical study evaluating two sizes of pilot holes for bioabsorbable screws

The purpose of this study was to compare the initial fixation strengths of bioabsorbable screws for tendon transfers in the foot and ankle when the pilot hole size varied. A 7 x 20 mm screw was used with 5.5 mm and 6.5 mm drill holes, and a 5 x 20 mm screw was used with 3.9 mm and 4.5 mm drill holes. Biomechanical testing was performed on each tendon transfer in cadaver specimens. A paired t-test showed no significant difference in pullout strength when pilot hole size varied between 79 to 93% of the screw size for the 7 mm screw and 78 to 90% of the screw size for the 5 mm screw. Previous studies have found a critical value of tendon tension equaling 50 N with passive dorsiflexion of the foot. With an average value of approximately 170 N, the 7 mm screw provided three times the requisite strength. The 5 mm screw provided 1.5 times the requisite strength, but the transfer was technically more difficult.

Trabecular bone volume fraction mapping by low-resolution MRI

Trabecular bone volume fraction (TBVF) is highly associated with the mechanical competence of trabecular bone. TBVF is ordinarily measured by histomorphometry from bone biopsies or, noninvasively, by means of high-resolution microcomputed tomography and, more recently, by micro-MRI. The latter methods require spatial resolution sufficient to resolve trabeculae, along with segmentation techniques that allow unambiguous assignment of the signal to bone or bone marrow. In this article it is shown that TBVF can be measured under low-resolution conditions by exploiting the attenuation of the MR signal resulting from fractional occupancy of the imaging voxel by bone and bone marrow, provided that a reference signal is available from a marrow volume devoid of trabeculation. The method requires accurate measurement of apparent proton density, which entails correction for various sources of error. Key among these are the spatial nonuniformity in the RF field amplitude and effects of the slice profile, which are determined by B(1) field mapping and numerical integration of the Bloch equations, respectively. By contrast, errors from variations in bone marrow composition (hematopoietic vs. fatty) between trabecular and reference site are predicted to be small and usually negligible. The method was evaluated in phantoms and in vivo in the distal radius and found to be accurate to 1% in marrow volume fraction. Finally, in a group of 12 patients of varying skeletal status, TBVF in the calcaneus was found to strongly correlate with integral bone mineral density of the lumbar vertebrae (r(2) = 0.83, p < 0.0001). The method may fail in large imaging objects such as the human trunk at high magnetic field where standing wave and RF penetration effects cause intensity variations that cannot be corrected. Magn Reson Med 46:103-113, 2001.

Interpretation of calcaneus dual-energy X-ray absorptiometry measurements in the assessment of osteopenia and fracture risk

Dual-energy X-ray absorptiometry (DXA) of the calcaneus is useful in assessing bone mass and fracture risk at other skeletal sites. However, DXA yields an areal bone mineral density (BMD) that depends on both bone apparent density and bone size, potentially complicating interpretation of the DXA results. Information that is more complete may be obtained from DXA exams by using a volumetric density in addition to BMD in clinical applications. In this paper, we develop a simple methodology for determining a volumetric bone mineral apparent density (BMAD) of the calcaneus. For the whole calcaneus, BMAD = (BMC)/ADXA3/2, where BMC and ADXA are, respectively, the bone mineral content and projected area measured by DXA. We found that ADXA3/2 was proportional to the calcaneus volume with a proportionality constant of 1.82 +/- 0.02 (mean +/- SE). Consequently, consistent with theoretical predictions, BMAD was proportional to the true volumetric apparent density (rho) of the bone according to the relationship rho = 1.82 BMAD. Also consistent with theoretical predictions, we found that BMD varied in proportion to rho V1/3, where V is the bone volume. We propose that the volumetric apparent density, estimated at the calcaneus, provides additional information that may aid in the diagnosis of osteopenia. Areal BMD or BMD2 may allow estimation of the load required to fracture a bone. Fracture risk depends on the loading applied to a bone in relation to the bone's failure load. When DXA is used to assess osteopenia and fracture risk in patients, it may be useful to recognize the separate and combined effects of applied loading, bone apparent density, and bone size.

Calcaneal loading during walking and running

PURPOSE

This study of the foot uses experimentally measured kinematic and kinetic data with a numerical model to evaluate in vivo calcaneal stresses during walking and running.

METHODS

External ground reaction forces (GRF) and kinematic data were measured during walking and running using cineradiography and force plate measurements. A contact-coupled finite element model of the foot was developed to assess the forces acting on the calcaneus during gait.

RESULTS

We found that the calculated force-time profiles of the joint contact, ligament, and Achilles tendon forces varied with the time-history curve of the moment about the ankle joint. The model predicted peak talocalcaneal and calcaneocuboid joint loads of 5.4 and 4.2 body weights (BW) during walking and 11.1 and 7.9 BW during running. The maximum predicted Achilles tendon forces were 3.9 and 7.7 BW for walking and running.

CONCLUSIONS

Large magnitude forces and calcaneal stresses are generated late in the stance phase, with maximum loads occurring at approximately 70% of the stance phase during walking and at approximately 60% of the stance phase during running, for the gait velocities analyzed. The trajectories of the principal stresses, during both walking and running, corresponded to each other and qualitatively to the calcaneal trabecular architecture.

The effect of region of interest selection on dual energy X-ray absorptiometry measurements of the calcaneus in 55 post-menopausal women

Bone mineral density (BMD) of the calcaneus was assessed by dual energy X-ray absorptiometry (DXA) in four different regions of the calcaneus in 20 pre-menopausal and 55 post-menopausal women, none of whom were on treatment or suffering from conditions affecting bone. The total body option in the small animal software package of a Lunar DPX-L bone densitometer was used. The precision of the technique (%CV) varied from 0.7 to 2.2% depending on the region scanned. For post-menopausal women, BMD results in the mid and posterior parts of the calcaneus varied by < 7% while BMD in the anterior region was about 20% lower. DXA of the calcaneus was compared with measurements at the spine (L2-L4) and hip (femoral neck) and changes with age were estimated from cross-sectional data. BMD of the calcaneus was significantly reduced in 28 post-menopausal women with low lumbar spine BMD (-2SD) compared with women with normal spine BMD. Calcaneal BMD was significantly correlated to axial BMD (r = 0.45-0.77) and to age (r = 0.45 to -0.63). For a subgroup of 33 post-menopausal women measured twice after approximately 1 year, calcaneus BMD decreased by between 1.2% and 2.5% while axial BMD showed no significant change. Unlike spine or femoral neck BMD, the decrease in calcaneus BMD was significantly greater in women with low spine BMD than in normal women, possibly indicating improved detection of skeletal changes. The optimum measurement sites for BMD in the calcaneus were within the mid or posterior part of the calcaneus or enclosing the whole posterior calcaneus. The calcaneus was shown to be a precise, sensitive and simple measurement site suitable for the assessment of osteoporosis, especially in the elderly where degenerative changes in the spine and hip can complicate BMD assessment.

Radiation exposure in bone mineral density assessment

Osteoporosis is a systematic skeletal disease characterized by low bone mass and microarchitectural deterioration of bone tissue which leads to diminished biomechanical competence of the skeleton and low-trauma or atraumatic fractures. Due to increased awareness of the impact of osteoporosis on the elderly population, the use of bone densitometric techniques is becoming more widespread. Considerable progress has been made in the development of non-invasive methods for the assessment of the skeleton. While DXA and QCT are commonly used techniques, the popularity of other approaches such as RA, SXA and QUS is gaining grounds. QCT has an advantage over the other techniques in its ability to measure the true volumetric density of trabecular or cortical bone. We therefore present an overview of these current techniques for bone mineral density (BMD) measurements. In the second section we discuss the radiation doses incurred in BMD measurements by patients and methods for reducing patient and staff radiation exposure are given. Studies of radiation dose to patient from DXA confirms that patient dose is small (0.08-4.6 muSv) compared to that given by many other investigations involving ionizing radiation. Fan beam technology with increased resolution has resulted in increase patient dose radiation dose (6.7-31 muSv) but this is still relatively small. Carrying vertebral morphometry using DXA also incurs less radiation dose (< 60 muSv) than standard lateral radiographs QCT has radiation dose (25-360 muSv) comparable to simple radiological examination such as chest X-ray but lower than imaging CT. Radiation dose from other techniques such as RA and SXA are in the same order of magnitude as pencil beam DXA. For pencil beam DXA and SXA systems the time average dose to staff from scatter is very low even with the operator sitting as close as 1 m from the patient during measurement. However the scatter dose from fan beam DXA systems is considerable higher and approaches limits set by regulator bodies for occupational exposure.

Smoking as a risk factor for bone mineral density in the heel of Japanese men

Bone mineral density (BMD) of the calcaneus was measured in 1736 male Japanese office workers (age 20-64 yr) using a DX-2000 (Matsushita Industrial Equipment, Toyonaka, Japan). The scanning time was 10 s, with an in vitro precision error of 0.85% and an in vivo precision error of 1.54%. A significant gradual loss of BMD was detected between 20 and 60 yr of age, with an age difference of 0. 27% per year. Significant determinants for heel BMD were body mass index, age, and smoking. A nonsignificant factor was alcohol consumption. The coefficient of determination was 30.7%. These results suggest that smoking is a risk factor for osteoporosis in middle-aged Japanese men.

Calcaneus as a site for the assessment of bone mass

The calcaneus is a skeletal site frequently used for monitoring bone loss after spaceflight, because it is sensitive to microgravity-induced bone mineral loss and reflects the degree of demineralization in the vertebra and the femoral neck. In this article, methods for assessing the calcaneus are reviewed, and their potential applications and limitations as the monitoring site for bone loss in weightlessness are discussed. Currently, single or dual energy X-ray absorptiometry appears to be most sensitive for monitoring bone mineral loss in weightlessness. The results of recent studies suggest two- to threefold longer follow-up times required for ultrasound techniques. However, ultrasound devices can be designed to be portable, making them attractive for inflight use, and ultrasound techniques are expected to provide information related to bone quality. Additional investigations that assess new ultrasound techniques would be important to determine and utilize the full potential of this technology for monitoring bone loss in weightlessness.

Bone density determination

Bone mineral density determination is an integral part of the diagnosis, therapeutic planning, and monitoring of a patient with osteoporosis. Although the utility of measuring bone density seems intuitive, decisions must be made regarding whom to test, when to test, which technique to use, and which body site to evaluate. Once a determination has been made, consideration has to be given to what to do with the results. Each patient must be individually considered, incorporating genetic, nutritional, lifestyle, pharmacologic, and endocrine risk factors. Other diseases that may be associated with a reduced bone mass must be excluded.

Mandibular condyle bone mineral density measurement by quantitative computed tomography: a gender-related difference in correlation to spinal bone mineral density

We conducted volunteer studies to assess age-related changes of mandibular condyle bone mineral density (BMD) and its correlation to the spinal BMD. Quantitative computed tomography was performed on the condyles and spines (L1-3) of 210 healthy subjects (114 men and 96 women, aged 5-85 years). A separate study was performed on 73 young student subjects (39 men and 34 women, aged 23-25 years). The mandibular condyle BMD showed a decrement rate similar to spinal BMD in men, but in women the decrement rate of the mandibular condyle BMD was lower than that of the L1-3 BMD. On the other hand, correlation coefficients in BMD between the mandibular condyle and spine were similar in women and men. Gender-related differences were found to be dramatic when assessed in the young student group; the mandibular condyle and spinal BMDs were highly correlated in women (r = 0.82, p < 0.0001), but no correlation was found in men (r = 0.22). Taken together, these results suggest that the same regulatory mechanisms exist in the mandibular condyle and spine BMDs. However, aside from the spine BMD, additional undefined factor(s), including mechanical stress from the occlusion, may be involved in maintaining mandibular BMD.