Formulation and development of orodispersible sustained release tablet of domperidone

Tocilizumab-coated solid lipid nanoparticles loaded with cannabidiol as a novel drug delivery strategy for treating COVID-19: A review

Commonly used clinical strategies against coronavirus disease 19 (COVID-19), including the potential role of monoclonal antibodies for site-specific targeted drug delivery, are discussed here. Solid lipid nanoparticles (SLN) tailored with tocilizumab (TCZ) and loading cannabidiol (CBD) are proposed for the treatment of COVID-19 by oral route. TCZ, as a humanized IgG1 monoclonal antibody and an interleukin-6 (IL-6) receptor agonist, can attenuate cytokine storm in patients infected with SARS-CoV-2. CBD (an anti-inflammatory cannabinoid and TCZ agonist) alleviates anxiety, schizophrenia, and depression. CBD, obtained from Cannabis sativa L., is known to modulate gene expression and inflammation and also shows anti-cancer and anti-inflammatory properties. It has also been recognized to modulate angiotensin-converting enzyme II (ACE2) expression in SARS-CoV-2 target tissues. It has already been proven that immunosuppressive drugs targeting the IL-6 receptor may ameliorate lethal inflammatory responses in COVID-19 patients. TCZ, as an immunosuppressive drug, is mainly used to treat rheumatoid arthritis, although several attempts have been made to use it in the active hyperinflammatory phase of COVID-19, with promising outcomes. TCZ is currently administered intravenously. It this review, we discuss the potential advances on the use of SLN for oral administration of TCZ-tailored CBD-loaded SLN, as an innovative platform for managing SARS-CoV-2 and related infections.

Ethosomal gel for rectal transmucosal delivery of domperidone: design of experiment, in vitro, and in vivo evaluation

Despite high efficiency of domperidone (DOM) in prophylaxis of emesis accompanied with radiotherapy and chemotherapy, it still can bother cancer patients by its powerful side effects and difficulty of its oral administration. The study was designed to develop and optimize DOM loaded ethosomal gel for rectal transmucosal delivery. Ethosomal formulations were prepared using a 2¹, 5¹ full-factorial design where the impact of lecithin concentration and additives were investigated. The optimum ethosomal vesicles were subsequently incorporated in Carbopol gel base where rheological behavior, spreadability, mucoadhesion, and in vivo pharmacokinetic parameters were studied. Based on Design Expert^® software (Stat Ease, Inc., Minneapolis, MN), the optimum formulation illustrated entrapment efficiency of 70.02%±5.52%, and vesicular size of 112 ± 3.3 nm, polydispersity index of 0.32 ± 0.01, zeta potential of −59 ± 0.28 mV, and % drug released after 6 h of 76.30%±2.45%. Moreover, ex vivo permeation through rabbit intestinal mucosa increased four times compared to free DOM suspension. The gel loaded with ethosomes showed excellent mucoadhesion to rectal mucosa. DOM ethosomal gel showed a raise in C_max and AUC_0–48 of DOM by twofolds compared to free DOM gel. The study suggested that ethosomes incorporated in gels could be an efficient candidate for rectal transmucosal delivery of DOM.

Orodispersible tablets for pediatric drug delivery: current challenges and recent advances

INTRODUCTION

Child appropriate dosage forms are indispensable in modern medicine and are a prerequisite for successful pediatric drug therapy. For years, experts have called for a paradigm shift, from liquid dosage forms to novel oral solid dosage forms. This review aims to shed light on recent developments in Orodispersible tablets (ODTs) and mini-tablets (ODMTs).

AREAS COVERED

This review focuses on the presentation and critical discussion of current challenges as well as recent advances in ODTs for pediatric drug delivery. Highlighted aspects are the evidence for acceptability by children, e.g. in comparison to other dosage forms, and limitations given by tablet size at different ages, as well as advances in special ODT formulations (taste masking, modified release, enabling formulations).

EXPERT OPINION

It is the authors' belief that OD(M)Ts have significant potential as dosage forms in pediatric therapy that has not yet been fully exploited. The reasons for this are, first, that the number of direct acceptance studies is extremely low and the resulting knowledge is therefore rather anecdotal. Despite the high relevance, there seems to be reluctance both in the therapeutic use and conduction of respective studies in children. However, if one combines the knowledge from the few existing studies, surveys, and from approved products, it becomes apparent that so far there is no evidence on limitations of the use of ODTs in pediatric patients.

How could nanobiotechnology improve treatment outcomes of anti-TNF-α therapy in inflammatory bowel disease? Current knowledge, future directions

Despite significant advances in therapeutic possibilities for the treatment of inflammatory bowel disease (IBD) in recent years, there is still a big room for improvement. In particular, biological treatment can induce not only clinical remission but also mucosal healing of the gastrointestinal tract. Among these therapeutic molecules, anti-tumor necrosis factor-alpha (anti-TNF-α) antibodies were the first to revolutionize treatment algorithms in IBD. However, due to the parenteral route of administration and systemic mode of action, TNF-α blockers are characterised by high rates of immunogenicity-related loss of response and serious adverse events. Moreover, intravenous or subcutaneous therapy is not considered patient-friendly and requires occasional, direct contact with healthcare centres. To overcome these limitations, several attempts have been made to design oral pharmaceutical formulations of these molecules. It is hypothesized that oral anti-TNF-α antibodies therapy can directly provide a targeted and potent anti-inflammatory effect in the inflamed gastrointestinal tissues without significant systemic exposure, improving long-term treatment outcomes and safety. In this review, we discuss the current knowledge and future perspectives regarding different approaches made towards entering a new era of oral anti-TNF-α therapy, namely, the tailoring of biocompatible nanoparticles with anti-TNF-α antibodies for site-specific targeting to IBD. In particular, we discuss the latest concepts applying the achievements of nanotechnology-based drug design in this area.

PLA-PCL-PEG-PCL-PLA based micelles for improving the ocular permeability of dexamethasone: development, characterization, and in vitro evaluation

The aim of the present research was to investigate the feasibility of developing polylactide-polycaprolactone-polyethylene glycol-polycaprolactone-polylactide (PLA-PCL-PEG-PCL-PLA) based micelles to improve ocular permeability of dexamethasone (DEX). PLA-PCL-PEG-PCL-PLA copolymers were synthesized by a ring-opening polymerization method. DEX was loaded into the developed copolymers. The DEX-loaded micelles were characterized using transmission electron microscopy (TEM) and dynamic light scattering (DLS) methods. Cytotoxicity of the micelles obtained was investigated on L929 cell line. Cellular uptake was followed by fluorescence microscopy and flow cytometry analyses. The release behavior of DEX from the micelles as well as the drug release kinetics was studied. Corneal permeability was also evaluated using an ex vivo bovine model. The pentablock copolymers were successfully synthesized. The TEM results verified the formation of spherical micelles, the sizes of which was approximately 65 nm. The micelles exhibited suitable compatibility on L929 cells. The release profile showed an initial burst release phase followed by a sustained release phase, the kinetic of which was close to the Weibull's distribution model. The micelles showed higher corneal permeability in comparison to a marketed DEX eye drop. Taken together, the results indicated that the PLA-PCL-PEG-PCL-PLA micelles could be appropriate candidates for the ocular delivery of DEX, and probably other hydrophobic drugs.

In vitro and in vivo characterization of domperidone-loaded fast dissolving buccal films

The delivery of drugs via fast dissolving films is an effective alternative for drugs with low bioavailability when administered by other routes. This is the case of domperidone (DMP) an anti-emetic drug with low water solubility and vulnerable to extensive first-pass effect. To overcome these limitations, in this work, we designed and produced fast dissolving muco-adhesive buccal films of domperidone using varying amount polyvinylpyrrolidone (PVP K-90) using the solvent casting method. Films loaded with more than 10% of drug were not homogenous and opaque as indicated by white patches of drug in the film matrix. Formulation of DMP in the film form resulted in conversion of the drug from crystalline state to the semi-crystalline state as indicated by X-ray powder diffraction analysis. Moreover, about 40% of drug loaded within the films was released during the first five minutes compared to only about only 6.5% of pure drug in drug dissolution assays in vitro. In vivo pharmacokinetics analysis revealed that the DMP-loaded film had higher maximum plasma concentration (C_max) and shorter time to reach C_max (T_max) than a commercially available tablet formulation. In conclusion, the produced DMP buccal film formulation showed high absorption rate, rapid onset of action, and improved bioavailability compared with the conventional tablet. Our findings may support the development of novel dosage forms for the transmucosal delivery of DMP for convenient, rapid, and effective treatment of nausea and vomiting.

In situ composite ion-triggered gellan gum gel incorporating amino methacrylate copolymer microparticles: a therapeutic modality for buccal applicability

The aim of the current investigation is to delineate the buccal applicability of an in situ composite gel containing aceclofenac (AC) amino methacrylate copolymer microparticles (MPs), surmounting limitations of oral existing conventional therapy. AC Eudragit RL100 MPs were fabricated and statistically optimized using 2²4¹ factorial design. Better buccal applicability and enhanced localization were achieved by combining the optimum MPs with in situ ion-activated gellan gum gel. The crosslinking and gelation of in situ gel were investigated by morphological and solid state characterizations. Suitability for buccal delivery and in vivo therapeutic efficacy in inflammation model of rats were also assessed. Results showed that the best performing formula displayed particle size (PS) of 51.00 µm and high entrapment efficiency (EE%) of 94.73%. MPs were successfully entrapped inside the gel network of the composite system. Gelation tendency, pH, shear-thinning properties and mucoadhesivity of the prepared in situ composite gel guaranteed its buccal suitability. Sustained AC release features and promising in vitro anti-arthritic response were also demonstrated. Moreover, consistent and prolonged in vivo anti-inflammatory effect was achieved, relative to standard AC. Taken together; this study proves the potential of in situ composite gel as an appropriate therapeutic proposal for AC buccal delivery.

Isoniazid-loaded orodispersible strips: Methodical design, optimization and in vitro-in silico characterization

Drug treatment remains the most effective global approach to managing and preventing tuberculosis. This work focuses on formulating and evaluating an optimized polyvinyl alcohol-polyethylene glycol based orodispersible strip containing isoniazid, a first-line anti-tubercular agent. A solvent casting method guided through a Taguchi experimental design was employed in the fabrication, optimization and characterization of the orodispersible strip. The optimized strip was physically amalgamated with a monolayer, uniformly distributed surface geometry. It was 159.2 ± 3.0 µm thick, weighed 36.9 ± 0.3 mg, had an isoniazid load of 99.5 ± 0.8%w/w, disintegration and dissolution times of 17.6 ± 0.9 s and 5.5 ± 0.1 min respectively. In vitro crystallinity, thermal measurements and in silico thermodynamic predictions confirmed the strip's intrinsic miscibility, thermodynamic stability and amorphous nature. A Korsmeyer-Peppas (r = 0.99; n > 1 = 1.07) fitted kinetics typified by an initial burst release of 49.4 ± 1.9% at 4 min and a total of 99.8 ± 3.3% at 30 min was noted. Ex vivo isoniazid permeation through porcine buccal mucosa was bi-phasic and characterized by a 50.4 ± 3.8% surge and 95.6 ± 2.9% at 5 and 120 min respectively. The strip was physicomechanically robust, environmentally stable and non-cytotoxic.

Improved therapeutic potential of tapentadol employing cationic exchange resins as carriers in neuropathic pain: evidence from pharmacokinetic and pharmacodynamics study

Current investigation was endeavoured to overcome problem of poor palatability and bioavailability of centrally acting analgesic, tapentadol (TAP) by formulating controlled release drug-resin complexes (DRCs). The technology encompassed in preparation of DRCs involved chemisorption of TAP to weak cationic resins (KyronT-134 and Tulsion335) by batch method. Various formulation variables like drug-resin ratio, pH, resin activation and swelling time were optimized to achieve maximum drug loading in DRCs. FT-IR, DSC, pXRD, in vitro release study under bio-relevant condition of mouth and in vivo sensory taste evaluation established formation of taste masked DRC whereas dissolution study assured prolonged drug release behaviour of optimized DRC. Among DRCs, TAP-KyronT-134 complex exhibited higher drug loading (80.89 ± 4.56%), stability and prolonged release profile (10 h) without any detectable amount of drug release under salivary conditions. Pharmacokinetic studies in wistar rats revealed increased Tmax (2.67-fold), MRT (1.94-fold), elimination half-life (2.79-fold) and relative oral bioavailability (2.62-fold) of TAP on oral administration of optimized formulation compared to TAP solution. Furthermore, pharmacodynamics study confessed higher potential of DRC in attenuating chronic injury induced tactile allodynia for prolonged duration. In conclusion, the method developed is easily scalable and holds potential for commercialization with an evidence of obtaining more efficacious neuropathic pain management therapy.