Does Mandibular Gonial Angle Influence the Eruption Pattern of the Lower Third Molar? A Three-Dimensional Study

Evaluation of the usefulness of platelet-rich fibrin (PRF) in mandibular third molar surgery with 3D facial swelling analysis: a split-mouth randomized clinical trial

BACKGROUND

Third molar surgery is associated with various postoperative complications (PC). Different strategies, including the application of platelet-rich fibrin (PRF), have been implemented to reduce PC. Digital technologies have proven useful in objectively assessing postoperative facial swelling. This study aimed to evaluate the effect of PRF on reducing facial swelling after lower third molar surgery using a 3D face scanner.

METHODS

A randomized split-mouth clinical trial was set up and 32 patients (18 to 32 years), requiring extraction of both mandibular third molars, were recruited at the Oral Surgery Clinic of the Magna Graecia University of Catanzaro. The primary predictive variable was the application or not of PRF plugs and membranes in the post-extraction socket. Primary outcome variable was facial swelling recorded with a face scanner preoperatively (T0), after three (T1) and seven (T2) days. Qualitative and quantitative data analysis were conducted following an automated and standardized imaging analysis workflow using the 3D Slicer software. Secondary outcome variables were trismus, recorded by measuring the maximum buccal opening with a caliper, pain, recorded using a visual analogue scale (VAS), and duration of the surgery. Descriptive and bivariate analysis were performed by setting the significance level [Formula: see text] = 0.05.

RESULTS

All patients exhibited a significant increase in facial swelling at T1, followed by a subsequent reduction from day 3 to day 7, with a slight persistence of edema observed on the seventh day. No significant data emerged from the statistical analysis conducted. Linear differences in PRF group reported improved values of postoperative swelling only in the T1-T2 and T0-T2 phases of analysis. Volumetric differences favored PRF group compared with control group in all phases. VAS was lower in PRF group only at T2, compared with control group.

CONCLUSIONS

Application of PRF in post-extraction sockets showed effectiveness in reducing facial swelling. Its advantages, including accessibility, cost-effectiveness, and absence of adverse reactions, make it an optimal treatment choice in reducing post-surgical sequelae.

Mandibular second molar impaction: introducing a novel and validated 3D classification system

BACKGROUND

Mandibular second molar (M2M) impaction is a clinically significant manifestation of eruption disturbance in dental development. The primary aim of this study was to investigate the impact of the three-dimensional (3D) characterization on clinical and therapeutic decisions for M2M impaction. The secondary aim was to introduce a validated 3D classification system incorporating both surgical and orthodontic parameters.

METHODS

Bidimensional (2D) and 3D radiological records of 15 impacted M2M were collected and deidentified. Ten experienced clinicians (5 oral surgeons;5 orthodontists) categorized each case, first based on 2D records and then with 3D scans. The degree of orthodontic and surgical difficulty in treating impacted M2M was evaluated using a novel classification system based on anatomical and radiological features. The primary outcome variable was the assessment of differences in diagnosis and decision-making protocol using 2D or 3D records, where clinical relevance ranged from 0 to 4. The secondary outcome variable was the validation analysis of the proposed 3D classification system to determine the concordance among the clinicians. Descriptive statistics and multivariable inferential analysis based on Akaike information criterion (AIC) were performed (α = 0.05).

RESULTS

3D examination allowed a better visualization of M2M impaction with higher clinical relevance for diagnosis of M2M root relationship to alveolar nerve and lingual plate, height to alveolar crest, depth, and inclination relative to the first molar and position relative to the third molar (range:2.69-3.43). The proposed 3D classification of M2M impaction changed clinical decisions regarding surgical-orthodontic approach, biomechanics, patient education, and treatment time estimate (range:2.59-3.33). In the validation analysis of the classification, no evidence of inter- or intra-group (surgeon/orthodontist) bias in score attribution occurred: the model with the minimum AIC was the null model (AIC = 718.04).

CONCLUSION

3D evaluation of impacted M2Ms could enhance diagnostic accuracy, and a classification system was proposed and validated by a group of experienced surgeons and orthodontists with high concordance.

Concordance Analysis of Lower Third Molar Surgery Classifications: A Comparative Study

The high frequency and complexity of mandibular third molar (M3M) surgery have led several authors to the development of classification systems for better evaluation and management in oral surgery. This study compared the classifications of Juodzabalys and Daugela et al. (JD), Sammartino et al., Chang et al., Jhamb et al., Maglione et al., and Nemsi et al. to understand the concordance between the scores of M3M surgery. Two types of analysis were conducted: the relationship between the M3M and the inferior alveolar nerve (IAN), and the overall difficulty score based on the tooth's angulation and its spatial position with the adjacent structure. The analysis of the classifications on the relationship between M3M and IAN resulted in a concordance of 26.1%. In the pairwise comparisons, the classifications of Nemsi et al. and Jhamb et al. showed the highest concordance of 59.5%. Analyzing the total scores difficulty, the JD et al., Chang et al., and Sammartino et al. classifications demonstrated a concordance level of 25.5%. A pairwise assessment revealed a higher concordance degree between the classifications of Sammartino et al. and Chang et al. (57.4%). The results highlight the limits in establishing a comprehensive and objective classification for the surgical difficulty of M3M, possibly attributed to variations in the methodology for computing total scores. An objective, automated, and non-operator-dependent classification method for assessing the surgical difficulty of M3M is still needed.

Proposal and Validation of a New Index to Assess the Difficulty of Lower Third Molar Extraction

There is no current consensus on the parameters that determine the difficulty of mandibular third molar extraction in terms of the time required, which is essential to prevent complications and optimize the time of the intervention. This study aims to obtain, using the mathematical method of multiple linear regression, an equation that allows estimating the extraction time of a lower third molar according to its complexity, as well as to validate this equation in a sample of external wisdom teeth.

METHODS

A prospective cohort study on a sample of patients of the Master of Oral Surgery of the University of Seville in which multiple linear regression coefficients were calculated with a subsequent validation study of the results in the sample of patients operated in the Hospital Palmaplanas of Mallorca.

RESULTS

The regression line obtained after applying the statistical methodology to the cohort of patients from the University of Seville obtained significant dependent variables such as depth, roots, and odontosection. Once applied to the cohort of patients from the Palmaplanas Hospital in Mallorca, a regression coefficient was obtained between the data received and the estimated 0.770.

CONCLUSIONS

The formula proposed in this article presents significant validity in the prediction of the surgical time of extraction of the lower third molars included.

Investigation of the relationship between the mandibular third molar teeth and the inferior alveolar nerve using posteroanterior radiographs: a pilot study

BACKGROUND

The most severe complication that can occur after mandibular third molar (MM3) surgery is inferior alveolar nerve (IAN) damage. It is crucial to have a comprehensive radiographic evaluation to reduce the possibility of nerve damage. The objective of this study is to assess the diagnostic accuracy of panoramic radiographs (PR) and posteroanterior (PA) radiographs in identifying the association between impacted MM3 roots and IAN.

METHODS

This study included individuals who had PR, PA radiographs, and cone beam computed tomography (CBCT) and who had at least one impacted MM3. A total of 141 impacted MM3s were evaluated on CBCT images, and the findings were considered gold standard. The relationship between impacted MM3 roots and IAN was also evaluated on PR and PA radiographies. The data was analyzed using the McNemar and Chi-squared tests. The sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), and diagnostic accuracy of PR and PA radiographies were determined.

RESULTS

Considering CBCT the gold standard, the relationship between MM3 roots and IAN was found to be statistically significant between PR and CBCT (p = 0.00). However, there was no statistically significant relationship between PA radiography and CBCT (0.227). The study revealed that the most prevalent limitation of the PR in assessing the relationship between MM3 roots and IAN was the identification of false-positive relationship.

CONCLUSIONS

PA radiography may be a good alternative in developing countries to find out if there is a contact between MM3 roots and IAN because it is easier to get to, cheaper, and uses less radiation.

Impact of clear aligner therapy on masticatory musculature and stomatognathic system: a systematic review conducted according to PRISMA guidelines and the Cochrane handbook for systematic reviews of interventions

BACKGROUND

Clear aligner therapy has gained popularity as a minimally invasive orthodontic treatment option. However, its impact on the masticatory musculature and the stomatognathic system is an area of growing interest, as it involves the adjustment of occlusion and tooth movement. This systematic review aims to comprehensively assess and synthesise existing evidence regarding the influence of clear aligner therapy on the masticatory musculature and the stomatognathic system.

METHODS

An exhaustive search was performed on electronic databases that adhered to PRISMA guidelines. Clinical studies that evaluated the impact of patients receiving aligner orthodontic treatment on the muscles of the mastication and stomatognathic systems were included. A standardised data extraction form was devised for relevant variables. Two reviewers extracted the data variables. ROB-2 was used for bias evaluation in the selected studies.

RESULTS

A total of six studies met the inclusion criteria. The wearing of clear aligners significantly impacted the muscles of mastication. Muscle activity and discomfort showed a significant alteration in the initial days of appliance placement. but this observation was temporary, with no significant changes thereafter in subsequent follow-up. Bite force reduction was also noted. All the studies evaluated showed good methodological quality.

CONCLUSION

The review found that aligned orthodontic treatment may have a variable impact on muscles of mastication, with a potential for initial exacerbation of symptoms followed by possible improvement. However, due to the limited number of studies and their heterogeneous nature, further robust research is recommended to fully understand the relationship between aligned orthodontic treatment and masticatory muscles.

Factors associated with indication of prophylactic extraction of the lower third molar in orthodontic practice

Background

To date, there is no consensus on the factors that influence on indication for prophylactic extraction of the third molar, however it is a common indication in orthodontics. Aim: To determine the factors associated with indication of prophylactic extraction of the lower third molar in orthodontic practice.

Material and Methods

This cross-sectional analytical study used an online survey to obtain responses from 100 professionals with clinical practice in orthodontics. The Survey Monkey software was used to enter a valid and reliable questionnaire of 11 questions to obtain demographic and clinical information of the professional, as well as some patient conditions that could be considered in a possible indication for prophylactic extraction. The questionnaire was sent through social networks and instant messaging applications. Chi Square test was used to evaluate associated factors and binomial logistic regression to identify risk or protective factors.

Results

Factors significantly associated with indication of prophylactic extraction of the lower third molar were experience in orthodontics (p-value = 0.060; OR=0.325), characteristics of impaction (p-value = 0.012; OR=3.689), prevention of pericoronitis (p-value = 0.014; OR=3.769) and help stability of treatment results (p-value = 0.002; OR=6.074).

Conclusions

The risk factors to indication for prophylactic extraction of the lower third molar were impaction of the third molar, prevention of pericoronitis and helping the stability of the results after treatment. Furthermore, experience in orthodontics was identified as a protective factor for this indication. Key words:Orthodontics, risk factors, third molar, tooth extraction.

Stereomicroscopic evaluation of sealing ability of four different root canal sealers: an in-vitro study

AIM

To compare and evaluate the sealing ability of four different commercially available sealers to provide seal against the dye penetration test using a stereomicroscope-an in-vitro study.

MATERIAL/METHOD

80 extracted single rooted mandibular premolar with single canal were used in this study. The samples were divided in 4 groups (20 in each) based on sealer. Group I (Diaproseal), Group II (apexit Plus), Group III (MTA Fillapex) and Group IV (Bio-C). The samples were analyzed using a stereomicroscope and data analysis was done with one-way Anova And post hoc Tukey's test.

RESULT

The mean dye penetration score was 1.2400 ± 0.778 mm for Group I. 2.6000 ± 0.897 mm for Group II, 4.2000 ± 0.923 mm for Group III and 4.225 ± 2.055 mm for Group IV. One-way Anova analysis shows that intergroup comparison was statistically significant between the four groups. The post hoc Tukey's test reveals that the difference was statistically non-significant between group III and group IV.

CONCLUSION

It was concluded that between the four groups the Group I (Diaproseal) showed the least dye penetration followed by Group II (Apexit Pus), Group III (MTA Fillapex) and then Group IV (Bio-C), where there was no significant difference between the Group III (MTA Fillapex) and Group IV (Bio-C).

Mandibular Third Molar Impaction and Bone Change Distal to the Second Molar: A Panoramic Radiographic Study

Background: The mandibular third molar is the most frequently impacted tooth. An impacted mandibular third molar (IMTM) can have negative consequences on the adjacent mandibular second molar (MSM), such as bone loss. An IMTM can be identified using orthopantomography (OPG). Our objective is to compare changes in bone level distal to the mandibular second molar (MSM) in patients with an extracted IMTM versus non-extracted IMTM using OPG. Methods: In this retrospective case-control study, 160 orthopantomograms (OPGs) of 80 patients who attended Dental Hospital of the University of Barcelona (HOUB) were randomly selected. Participants were stratified into a study group and control group. Results: Males and females experienced bone gain in the study group and bone loss in the control group. However, the difference in bone-level change was not statistically significant regarding gender in the study group. Within the study group, the age group of 29-39 years demonstrated significant (p-value = 0.042) bone gain after extraction compared to other age groups. However, the control group demonstrated bone loss in all age groups in which the difference is not statistically significant (p-value 0.794). Conclusions: Bone improvements distal to the MSM were observed after the extraction of an IMTM compared to when an IMTM was not extracted.

Breakthroughs in Oral and Maxillofacial Surgery

In the field of oral and maxillofacial surgery, continuous advances have ushered in a new era of innovation, profoundly influencing this branch of medicine [...].

The effectiveness of chitosan as a hemostatic in dentistry in patients with antiplatelet/anticoagulant therapy: systematic review with meta-analysis

Hemorrhage control is a crucial aspect of dental procedures, and achieving efficient hemostasis remains a key challenge. The advent of hemostatic dressings has revolutionized the field of dentistry by providing effective and convenient solutions for managing bleeding in vari-ous dental scenarios. This article aims to provide an overview of hemostatic dressings, their mechanisms of action, and their diverse applications in dentistry. We applied the following Pop-ulation, Exposure, Comparator, and Outcomes (PICO) model to assess the document eligibility. A literature search was performed on major search engines, using keywords. At the end of the search, 3 articles were selected that matched the PICO. Three items were selected after the screen-ing process, and bleeding times were analyzed between the control group and the study group. The overall effect showed a substantial and statistically significant difference with bleeding time in favour of HDD-treated patients, showing that this garrison is very useful in controlling bleed-ing for patients taking anticoagulants and antiplatelets (Mean difference - 5.61; C.I. -5.70, - 5.52); Overall, hemostatic dressings have revolutionized the management of bleeding in dentistry, offering a promising solution to achieve optimal hemostasis, improve treatment outcomes, and enhance patient care, particularly Hemcon.

Neurosensory Deficits of the Mandibular Nerve Following Extraction of Impacted Lower Third Molars-A Retrospective Study

BACKGROUND

Neurosensory deficits are one of the major complications after impacted lower third molar extraction leading to an impaired patient's quality of life. This study aimed to evaluate the incidence of neurosensory deficits after lower third molar extraction and compare it radiologically to the corresponding position of the inferior alveolar nerve.

METHODS

In a retrospective study, all patients who underwent impacted lower third molar extraction between January and December 2019 were compiled. Therefore, clinical data as well as preoperative radiological imaging were assessed.

RESULTS

In total, 418 patients who underwent lower third molar extractions (n = 555) were included in this study. Of these, 33 (5.9%) had short-term (i.e., within the initial 7 postoperative days) and 12 (1.3%) long-term (i.e., persisting after 12 months) neurosensory deficits documented. The inferior alveolar nerve position in relation to the tooth roots showed apical position in 27%, buccal position in 30.8%, lingual position in 35.4%, and interradicular position in 6.9%.

CONCLUSIONS

A statistically significant increased incidence of neurosensory deficits occurs when the inferior alveolar nerve is directly positioned lingually to the tooth roots (p = 0.01).

Tomographic analysis of relationship of mandibular morphology and third molars eruption

BACKGROUND

Lower third molars (L3M) are the last teeth to erupt in the oral cavity. Uneruption of these teeth still raises questions about its causes, in the literature (1) genetic factors, (2) dental lamina activity and, mainly, (3) insufficient growth and development of the bone bases are included. While the lack of space theory influenced by mandibular morphology and size of L3M was argued to be the main reason for L3M impaction, there is a limitation in the literature in examining such association using more accurate tomographic analysis obtained from CBCT. This work aimed to evaluate the relationship between mandibular morphology and the eruption of L3M.

METHODS

In this regard, 85 Cone Beam Computed Tomographies (CBCT), with 147 L3M, were selected from the archives of the Department of Surgery, Stomatology, Pathology and Radiology, Bauru School of Dentistry, obtained using an Accuitomo® Morita device and using the Dolphin Imaging 11.9 software. L3M eruption was related to linear measurements of jaw length (Co-Gn), retromolar space dimension (D2R), mesiodistal width of the L3M crowns, mandibular first molars (L1M) and mandibular canines (LC) and the angle mandibular (Ar-Go-Me). Independent samples t-test, chi-square tests and logistic regression were performed adopting a significance level of 5%.

RESULTS

The average mandible length of 116.446 mm + 6.415 mm, retromolar space of 11.634 mm + 2.385 mm, mesiodistal size of the L3M of 10.054 mm + 0.941 mm, sum of the mesiodistal widths of the L1M and LC of 15.564 mm + 1.218 mm and mandibular angle of 127.23° + 6.109. There was no statistically significant association between these factors and the eruption.

CONCLUSION

With the results obtained in this study, we conclude that the length and angle of the mandible, teeth size and dimension of the retromolar space are not associated with the L3M eruption.

Panoramic Radiography vs. CBCT in the Evaluation of the Maxillary Third Molar Roots

Background and Objectives: A comprehensive understanding of the position of third molar roots and adjacent structures, such as the maxillary sinus (MS), is essential for safe extractions. Diagnostic imaging plays a fundamental role in achieving accurate treatment planning. This study aimed to compare panoramic radiography (PR) and cone-beam computed tomography (CBCT) for the evaluation of maxillary third molar roots and their relationship with the MS. Materials and Methods: Two trained radiologists evaluated third molar images. The number of roots, morphology (fused/conical, divergent, dilacerated, or atypical), and their relationship with the MS in PR and CBCT were registered. Descriptive and inferential statistics were performed using the weighted Kappa test. Results: Regarding the number and morphology of the roots, Kappa values showed moderate (κ = 0.42) and fair agreement (κ = 0.38), respectively. Regarding the proximity with the MS, most of the roots showed close contact (30.6%), or 1/3 of root superimposition (35%), in PR evaluation, while in CBCT, the third molars were in contact with the MS floor (32%), and with alveolar domes (27.2%). Conclusions: PR is a moderately reliable image technique to identify the number of roots and root morphology of maxillary third molars. PR, however, does not provide any radiographic signs that clearly indicate the anatomical relationship between the maxillary third molar roots and the maxillary sinus detected in CBCT images.

Six-Month Soft Tissues Healing after Lower Third Molar Extraction: Comparison of Two Different Access Flaps

BACKGROUND

As specific flap designs performed for lower third molar extractions usually influence periodontal healing of the adjacent first and second molars, this study aimed to evaluate the periodontal conditions of these sites after 6 months post-surgery.

METHODS

Forty patients, aged 14-30 years, were included. Surgical extraction of the lower third molar was performed through a flap with papilla detachment (a modified envelope technique with detachment of gingival papilla between the first and second molars) or a trapezoidal flap (characterized by mesial- and distal-releasing incisions). Periodontal parameters at the first and second molar sites were assessed for visible plaque index, bleeding on probing, recession, probing pocket depth, and clinical attachment loss before surgery (T0), one month (T1), and six months after extraction (T2).

RESULTS

No statistical differences were found for the plaque and bleeding indexes between the two flaps at each observation time and considering both time intervals. For recession, no statistical differences were found between the two flaps considering the final time interval. For probing pocket depth at the second molar site, both techniques registered a significant increase between T0 and T1, followed by a decrease up to T2. For clinical attachment loss, mean values assessed for the first and second molar sites demonstrated evidently increased values between T0 and T1, followed by moderate decreases up to T2.

CONCLUSIONS

Considering short (T1) and mid-term (T2) follow-ups, a specific flap design does not seem to particularly influence periodontal healing six months after surgery.

Managing Mandibular Second Molar Impaction: A Systematic Review and Meta-Analysis

PURPOSE

Mandibular second molar (M2M) impaction is a serious eruption disorder. The purpose of this systematic review was to analyze the therapeutic approaches for M2M impaction. The objective of the meta-analysis was to summarize the success of the surgical, surgical-orthodontic, and orthodontic treatment.

METHODS

A PRISMA-guided search strategy was conducted by 2 authors in 5 databases up to January 2023. Randomized and nonrandomized clinical trials were considered. Case reports, case series with<5 patients, and reviews were excluded. Methodological quality was assessed using Newcastle-Ottawa scale and Cochrane Collaboration tool for nonrandomized and randomized clinical trials, respectively. Outcomes were as follows: 1) treatment success rate defined by the repositioning of impacted M2M in the dental arch with normal functional occlusal relationship and periodontal health; 2) time-to-repositioning as time-to-event analysis; and 3) complications. Meta-analysis examined treatment success differences with 3 approaches: orthodontic (uprighting maneuvers/traction), surgical (surgical procedures/strategic extractions), and surgical-orthodontic (combined surgical and orthodontic procedures) as the exposure variable. The quantitative analysis also compared the success rate using third molar removal as the secondary predictor variable. The χ2 test determined the statistical heterogeneity (I2); a cut-off of 70% was used to select the common or random effects model. Odds ratio (OR) and 95% confidence interval (CI) were recorded.

RESULTS

A total of 1,102 articles were retrieved. After full-text reading, 16 articles were included and 1008 M2Ms were analyzed. Nine studies had fair quality, 6 studies had good quality, and 1 had unclear risk of bias. Managing impacted M2Ms showed a moderate to high success rate (66.7 to 100%). Significant differences favoring surgical treatment over orthodontic treatment were observed for M2M uprighting (OR = 4.97; CI: 1.49 to 16.51; P = .01).No differences were detected comparing surgical and surgical-orthodontic treatment (OR = 1.00; CI: 0.03 to 37.44; P = .99), or orthodontic and surgical-orthodontic treatment(OR = 4.14; CI: 0.43 to 40.14; P = .22).Third molar removal showed no significant correlation with M2M uprighting (OR = 1.98; CI: 0.24 to 16.03; P = .5).

CONCLUSION

Despite study limitations, both orthodontic and surgical management of impacted M2M can be effective suggesting that clinicians are able to choose best treatment for most cases.

Three-dimensional facial swelling evaluation of pre-operative single-dose of prednisone in third molar surgery: a split-mouth randomized controlled trial

BACKGROUND

Facial swelling, pain, and trismus are the most common postoperative sequelae after mandibular third molar (M3M) surgery. Corticosteroids are the most used drugs to reduce the severity of inflammatory symptoms after M3M surgery. This study aimed to evaluate the effect of a single pre-operative dose of prednisone on pain, trismus, and swelling after M3M surgery.

METHODS

This study was designed as a split-mouth randomized, controlled, triple-blind trial with two treatment groups, prednisone (PG) and control (CG). All the parameters were assessed before the extraction (T0), two days (T1), and seven days after surgery (T2). Three-dimensional evaluation of facial swelling was performed with Bellus 3D Face App. A visual analogue scale (VAS) was used to assess pain. The maximum incisal distance was recorded with a calibrated rule to evaluate the trismus. The Shapiro-Wilk test was used to evaluate the normal distribution of each variable. To compare the two study groups, the analysis of variance was performed using a two-tailed Student t-test for normal distributions. The level of significance was set at a = 0.05. Statistical analysis was conducted using the software STATA (STATA 11, StataCorp, College Station, TX).

RESULTS

Thirty-two patients were recruited with a mean age of 23.6 ± 3.7 years, with a male-to-female ratio of 1:3. A total of 64 M3Ms (32 right and 32 left) were randomly assigned to PG or CG. Surgery time recorded a mean value of 15.6 ± 3.7 min, without statistically significant difference between the groups. At T1, PG showed a significantly lower facial swelling compared to CG (PG: 3.3 ± 2.1 mm; CG: 4.2 ± 1.7 mm; p = 0.02). Similar results were recorded comparing the groups one week after surgery (PG: 1.2 ± 1.2; CG: 2.1 ± 1.3; p = 0.0005). All patients reported a decrease in facial swelling from T1 to T2 without differences between the two groups. At T1, the maximum buccal opening was significantly reduced than T0, and no difference between PG (35.6 ± 8.2 mm) and CG (33.7 ± 7.3 mm) (p > 0.05) was shown. Similar results were reported one week after surgery (PG: 33.2 ± 14.4 mm; CG: 33.7 ± 13.1 mm; p > 0.05). PG showed significantly lower pain values compared to CG, both at T1 (PG: 3.1 ± 1.5; CG: 4.6 ± 1.8; p = 0.0006) and T2 (PG: 1.0 ± 0.8; CG: 1.9 ± 1.4; p = 0.0063).

CONCLUSION

Our results showed that pre-operative low-dose prednisone administration could reduce postoperative sequelae by improving patient comfort after M3M surgery and reducing facial swelling two days and one week after surgical procedures.

TRIAL REGISTRATION

www.

CLINICALTRIALS

gov - NCT05830747 retrospectively recorded-Date of registration: 26/04/2023.

Non-Impacted Third Molars: Angels or Devils?

Third molars, also known as wisdom teeth, are located in the most posterior of the tooth arch [...].

Comparison between Magneto-Dynamic, Piezoelectric, and Conventional Surgery for Dental Extractions: A Pilot Study

This pilot split-mouth study aimed to evaluate and compare early postoperative discomfort and wound healing outcomes in post-extraction sockets after dental extraction performed with a Magnetic Mallet (MM), piezosurgery, and conventional instruments (EudraCT 2022-003135-25). Twenty-two patients requiring the extraction of three non-adjacent teeth were included. Each tooth was randomly assigned to a specific treatment (control, MM, or piezosurgery). Outcome measures were the severity of symptoms after surgery, wound healing assessed at the 10-days follow-up visit, and the time taken to complete each procedure (excluding suturing). Two-way ANOVA and Tukey’s multiple comparisons tests were performed to evaluate eventual differences between groups. There were no statistically significant differences between the compared methods in postoperative pain and healing, and no additional complications were reported. MM required significantly less time to perform a tooth extraction, followed by conventional instruments and piezosurgery, in increasing order (p < 0.05). Overall, the present findings suggest the use of MM and piezosurgery as valid options for dental extractions. Further randomized controlled studies are needed to confirm and extend this study’s results, facilitating the selection of the optimal method for an individual patient depending on the patient’s needs and preferences.

Eruption Pattern of Third Molars in Orthodontic Patients Treated with First Permanent Molar Extraction: A Longitudinal Retrospective Evaluation

The aim of this study was to evaluate angular and positional changes in the second (M2) and third molars (M3) of orthodontically treated patients undergoing a first molar (M1) extraction. A retrospective longitudinal study with a sample of 152 pre- and post-treatment panoramic radiographs was conducted. Thirty-nine patients (51.3%) were orthodontically treated with M1 extraction and thirty-seven (48.7%) were treated without extraction. Angulations of M2 and M3 relative to the infraorbital (IOP) and the palatal planes (PP) were measured and compared between the groups before orthodontic treatment (T1) and after the completion of orthodontic space closure (T2). The prognosis of M3 eruptions was evaluated by assessing their horizontal and vertical position (inclination) using different classification systems. The angular (p < 0.001) and inclination improvement (p < 0.01) of the maxillary M3 was significant for the M1 extraction group. The mandibular M3 inclination significantly improved (p < 0.01), whereas the groups' angulation and vertical position were not significantly different. These findings suggest that extraction therapy has a favorable effect on the maxillary M2 and M3 angulation, but not on the mandibular. M1 extraction showed a signi- ficant effect on the horizontal position of M3 and thus may improve the eruption space and prognosis.

STUDY OF THE STRESS-STRAIN STATE OF THE MAXILLA DURING ORTHODONTIC TREATMENT OF DENTOGNATHIC DEFORMATIONS IN CHILDREN WITH CONGENITAL CLEFT LIP AND PALATE

OBJECTIVE

The aim: To create a three-dimensional simulation mechanical-mathematical model of the biomechanical system "Orthodontic appliance-maxilla", to study peculiarities of the stress-strained state of the maxilla.

PATIENTS AND METHODS

Materials and methods: A simulation model of the biomechanical system "Orthodontic appliance-maxilla" was created using computed tomography (CBCT) data. Mathematical modeling was used to determine the stress-strain state of the simulation model.

RESULTS

Results: The patterns of changes in the stress state were determined and the values of deformation displacements in the structural elements of the biome-chanical system "Orthodontic appliance-maxilla" were determined under a force stress of the orthodontic device with an amplitude of 50 N.

CONCLUSION

Conclusions: Simulation computer modeling of the stress-strain state of the "Orthodontic appliance-maxilla" system showed that activation of the kinematic mechanism of the appliance with a force of 50 N causes the emergence of a complex stress-strain state of bones. When the orthodontic appliance is activated, there is an asymmetry in the distribution of stresses by Mises between the right and left sides both for the appliance itself and for the maxillary bone tissue.

The Influence of the Hyaluronic Acid Gel on the Postoperative Sequelae following Surgical Removal of the Impacted Mandibular Third Molar in Comparison with the A-PRF: A Randomized Controlled Trial

One of the most common procedures in oral surgery is the removal of impacted mandibular third molars, often followed by pain, swelling, alveolitis, and trismus. Purpose. To compare the outcomes of the intrasocket application of 1% hyaluronic acid oral gel (HA) and advanced platelet-rich fibrin (A-PRF) on the expected postoperative complications, pain, swelling, and trismus follow the surgical extraction of the impacted mandibular third molar. Material and Methods. A randomized controlled trial was conducted at the Oral and Maxillofacial Surgery Unit, Dental Teaching Hospital. Healthy patients who required surgical removal of the impacted mandibular third molar were divided randomly into three groups. The extraction site of the group (A) patients remained without the addition of any material, just suturing of the wound with simple interrupted sutures, while in group (B) patients, the extraction site was filled with 1 cc of 1% hyaluronic acid gel (periokin®), and in group C patients, the extraction site was filled with A-PRF. Results. Sixty-six eligible patients participated in this study; both hyaluronic acid gel 1% (periokin®) and advanced platelet-rich fibrin showed a significant reduction in pain, swelling, and trismus on the 1st, third, and seventh postoperative days when compared to the control group, while the comparison between HA and A-PRF showed no significant differences except for the pain on the third postoperative day. There was a significant pain decrease in the A-PRF group than HA group. Conclusion. Intrasocket application of 1% hyaluronic acid gel (periokin®) or advanced platelet-rich fibrin can be an effective primary way to significantly reduce postoperative pain, trismus, and edema compared to the control group following mandibular third molar surgery.

The radiological and histological investigation of the dental follicle of asymptomatic impacted mandibular third molars

OBJECTIVES

The indication for removal of asymptomatic fully impacted third molars is still controversial. In this study, radiological and histological investigation of the dental follicle of asymptomatic impacted mandibular third molars was performed, aiming to provide a reference for clinical prophylactic extraction of these teeth.

METHODS

Patients with impacted mandibular third molars were included and the maximum width of the dental follicle around the crown was measured in horizontal, sagittal and coronal sections by cone beam computed tomography. The dental follicles were stained with haematoxylin-eosin, analysed by a pathologist and classified as normal, inflammatory or cystic. A Chi-squared test was used to analyse the association of the incidence of inflammation and cysts with the clinical variables of the impacted mandibular third molars.

RESULTS

Thirty-seven samples were normal dental follicles; 52 samples showed inflammatory infiltration with an incidence of 57.14%; 2 samples with a maximum dental follicle width of 2-3 mm were diagnosed as odontogenic cysts, and the incidence was 2.20%. There was no significant difference in the incidence of inflammatory and cystic dental follicles between males and females, or between different age groups (P > 0.05). With an increase of the maximum width of the dental follicle, there was a rise in the incidence and degree of infiltration of chronic nonspecific inflammation.

CONCLUSION

Asymptomatic impacted mandibular third molars tend to be extracted, especially for teeth with a 2-3 mm maximum width of the dental follicle on radiological examination.

Modeling and Simulating an Orthodontic System Using Virtual Methods

Cone beam computed tomography (CBCT) is a modern imaging technique that uses X-rays to investigate the structures of the dento-maxillary apparatus and obtain detailed images of those structures. The aim of this study was to determine a functional mathematical model able to evaluate the elastic force intensity on each bracket and tube type element and the ways in which those components act on the orthodontic system being used. To analyze a real orthodontic system, we studied the case of a 13-year-old female patient. To transfer geometric information from tomographic images, we used the InVesalius software. This software can generate three-dimensional reconstructions based on sequences and files in the DICOM format and was purchased from CBCT equipment. We analyzed and processed the geometries of the converted tissues in InVesalius using the Geomagic software. After using the Geomagic software, we exported the resulting model to the SolidWorks software used in computer-aided design. In this software, the model is transformed into a virtual solid. After making the geometric model, we analyzed the model using the Ansys Workbench software, which incorporates finite element analysis techniques. Following the simulations, we obtained result maps, which showed the complete mechanical behavior of the analyzed structures.

A Scoping Review of the Efficacy of Diode Lasers Used for Minimally Invasive Exposure of Impacted Teeth or Teeth with Delayed Eruption

Background: The use of diode lasers for oral surgery soft tissue procedures is associated with less pain and bleeding, quick recovery, and better surgical site visibility. Objectives: This scoping review identifies and analyses the evidence evaluating the efficacy of the diode laser surgical exposure of impacted teeth or teeth with delayed eruption (both with no overlaying bone) vs. conventional scalpel surgical exposure. Materials and Methods: The PubMed/Medline, SCOPUS, and Google Scholar databases were searched up to January 2022 for randomized clinical trials and case-control studies comparing diode laser impacted-tooth surgical exposure vs. conventional surgical methods. Furthermore, the surgical exposure of an impacted mandibular canine or premolars with a 940 nm (InGaAsP) diode laser was presented. Results: The literature search revealed no high-quality evidence. However, four prospective studies were identified. Diode laser application was associated with less pain or analgesic need, minimal/no bleeding, and no need for suturing after surgery. The laser wavelengths used were 808, 810, 935, and 980 nm. A comparison of the study outcomes was not possible; all the studies had methodological issues and their funding sources were not mentioned. Conclusions: Adequately powered clinical trials are needed for comparing outcomes from diode laser surgical exposure vs. conventional methods, identifying the ideal laser characteristics, and assessing the long-term periodontal health of laser-exposed teeth and any potential risks.

Usefulness of Magnetic Mallet in Oral Surgery and Implantology: A Systematic Review

This systematic review aimed to answer the question: “Is the use of magnetic mallet effective in oral and implant surgery procedures in terms of tissue healing, surgery outcome, and complication rate compared to traditional instruments?” A literature search of PubMed, Scopus, and Web of Science databases (articles published until 1 October 2021) was conducted, in accordance with the PRISMA statement, using the keywords “magnetic mallet”, “electric mallet”, “oral surgery”, “implantology”, and “dental implant”. Of 252 articles, 14 were included in the review (3 for teeth extraction, and 11 for implant dentistry). Out of a total of 619 dental extractions (256 patients) performed with the magnetic mallet (MM), no complications were reported. Implants inserted totaled 880 (525 patients): 640 in the MM groups (382), and 240 in control groups (133). The survival rate of implants was 98.9% in the MM groups, and 95.42% in the control groups. Seven patients experienced benign paroxysmal positional vertigo after implant surgery, all in control groups. Results are not sufficient to establish the effectiveness of MM in oral and implant surgery procedures. Randomized controlled trials with a large sample size are needed.

The Growth Factors in Advanced Platelet-Rich Fibrin (A-PRF) Reduce Postoperative Complications after Mandibular Third Molar Odontectomy

Surgical removal of impacted mandibular third molars constitutes one of the most frequently performed procedures within oral surgery. This surgery procedure is associated with many post-operative complications. Advanced platelet-rich fibrin (A-PRF) belongs to the second generation of platelet concentrates and is rich in numerous growth factors. The aim of this study was to assess the influence of A-PRF on selected clinical features following the surgical removal of impacted mandibular third molars. The research was conducted on 100 generally healthy patients, who underwent a lower third molar odontectomy in Department of Oral Surgery, Medical University of Gdańsk, Poland, between 2018 and 2019. The research group consisted of 50 patients (immediate A-PRF socket filling) and control group (50 patients without A-PRF socket filling). During the study, the following clinical features were assessed: pain (visual analog scale), analgesics intake, the presence of trismus, edema, hematomas within the surrounding tissues (e.g., cheek), prevalence of pyrexia, dry socket, secondary bleeding, presence of hematomas, skin warmth in the post-operative area, and bleeding time observed by the patient were analyzed on the 3rd, 7th, and 14th day after the procedure. There was a significant association between A-PRF socket filling and pain intensity, the analgesics intake, trismus, and edema on the 3rd and the 7th day (p < 0.05). The presence of hematomas and skin warmth on the 3rd day after the surgery (p < 0.05) were also statistically associated with A-PRF use. The study showed that in reducing the incidence of postoperative complications, A-PRF was more important than the position of the tooth or the duration of the procedure. The growth factors in A-PRF reduce postoperative complications, such as pain, trismus, edema, analgesics intake, presence of hematomas, and skin warmth, after mandibular wisdom teeth odontectomy.