The Synthesis Methodology of PEGylated Fe3O4@Ag Nanoparticles Supported by Their Physicochemical Evaluation

Rapid and simple isolation and detection of exosomes using CaTiO3:Eu3+@Fe3O4 multifunctional nanocomposites

Exosomes are potential biomarkers for disease diagnosis and treatment, as well as drug carriers. However, as their isolation and detection remain critical issues, convenient, rapid, low-cost, and effective methods are necessary. In this study, we present a rapid and simple method for directly capturing and analyzing exosomes from complex cell culture media using CaTiO₃:Eu³⁺@Fe₃O₄ multifunctional nanocomposites. The CaTiO₃:Eu³⁺@Fe₃O₄ nanocomposites were prepared by high-energy ball-milling and used to isolate exosomes by binding CaTiO₃:Eu³⁺@Fe₃O₄ nanocomposites and the hydrophilic phosphate head of the exosome phospholipids. Notably, the developed CaTiO₃:Eu³⁺@Fe₃O₄ multifunctional nanocomposites achieved results comparable with those of commercially available TiO₂ and were separated using a magnet within 10 min. Moreover, we report a surface-enhanced Raman scattering (SERS)-based immunoassay for detecting the exosome biomarker CD81. Gold nanorods (Au NRs) were modified with detection antibodies, and antibody-conjugated Au NRs were labeled with 3, 3, diethylthiatricarbocyanine iodide (DTTC) as the SERS tags. A method combining magnetic separation and SERS was developed to detect exosomal biomarker CD81. The results of this study demonstrate the feasibility of this new technique as a useful tool for exosome isolation and detection.

Silver Nanoparticles for Waste Water Management

Rapidly increasing industrialisation has human needs, but the consequences have added to the environmental harm. The pollution caused by several industries, including the dye industries, generates a large volume of wastewater containing dyes and hazardous chemicals that drains industrial effluents. The growing demand for readily available water, as well as the problem of polluted organic waste in reservoirs and streams, is a critical challenge for proper and sustainable development. Remediation has resulted in the need for an appropriate alternative to clear up the implications. Nanotechnology is an efficient and effective path to improve wastewater treatment/remediation. The effective surface properties and chemical activity of nanoparticles give them a better chance to remove or degrade the dye material from wastewater treatment. AgNPs (silver nanoparticles) are an efficient nanoparticle for the treatment of dye effluent that have been explored in many studies. The antimicrobial activity of AgNPs against several pathogens is well-recognised in the health and agriculture sectors. This review article summarises the applications of nanosilver-based particles in the dye removal/degradation process, effective water management strategies, and the field of agriculture.

Evaluation of the Antibacterial Properties of Iron Oxide, Polyethylene Glycol, and Gentamicin Conjugated Nanoparticles against Some Multidrug-Resistant Bacteria

Antibacterial resistance is observed as a public health issue around the world. Every day, new resistance mechanisms appear and spread over the world. For that reason, it is imperative to improve the treatment schemes that have been developed to treat infections caused by wound infections, for instance, Staphylococcus epidermidis (S. epidermidis), Proteus mirabilis (P. mirabilis), and Acinetobacter baumannii (A. baumannii). In this case, we proposed a method that involves mixing the Gentamicin (Gen) with iron oxide nanoparticles (Fe3O4 NPs) and a polymer (polyethylene glycol (PEG)) with Fe3O4 NPs. X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), energy dispersive X-ray (EDX), scanning electron microscope (SEM), and transmission electron microscope (TEM) were used to characterize Fe3O4 NPs. Zeta potential and dynamic light scattering (DLS) were also assessed. The antibacterial activity of Fe3O4 NPs, Fe3O4 NPs+PEG, Fe3O4 NPs+Gen, and Fe3O4 NPs+PEG+Gen composites was investigated. The results showed a significant improvement in the antibacterial activity of nanoparticles against bacterial isolates, especially for the Fe3O4 NPs+PEG+Gen as the diameter of the inhibition zone reached 26.33 ± 0.57 mm for A. baumannii, 25.66 ± 0.57 mm for P. mirabilis, and 23.66 ± 0.57 mm for S. epidermidis. The Fe3O4 NPs, Fe3O4 NPs+PEG, Fe3O4+Gen, and Fe3O4+PEG+Gen also showed effectiveness against the biofilm produced by these isolated bacteria. The minimum inhibitory concentration (MIC) of Fe3O4 NPs for S. epidermidis was 25 µg mL−1 and for P. mirabilis and A. baumannii was 50 µg mL−1. The findings suggest that the prepared nanoparticles could be potential therapeutic options for treating wound infections caused by S. epidermidis, P. mirabilis, and A. baumannii.

Iron Oxide Magnetic Nanoparticles with a Shell Made from Nanosilver-Synthesis Methodology and Characterization of Physicochemical and Biological Properties

The interest in magnetic nanoparticles is constantly growing, which is due to their unique properties, of which the most useful is the possibility of directing their movement via an external magnetic field. Thus, applications may be found for them as carriers in targeted drug delivery. These nanomaterials usually form a core in a core-shell structure, and a shell may be formed via various compounds. Here, nanosilver-shelled iron oxide magnetic nanoparticles were developed. Various reaction media and various Arabic gum (stabilizer) solution concentrations were investigated to verify those that were most beneficial one in limiting their agglomeration as much as possible. The essential oil of lavender was proposed as a component of such a medium; it was used alone or in combination with distilled water as a solvent of the stabilizer. The particle size was characterized by dynamic light scattering (DLS), the chemical structure was characterized via FT-IR spectroscopy, the crystallinity was characterized by X-ray diffraction (XRD), and the surface morphology and elemental composition were verified via the SEM-EDS technique. Moreover, UV-Vis spectrophotometry was used to verify the presence of the shell made of nanosilver. Importantly, the particles' pro-inflammatory activity and cytotoxicity towards L929 murine fibroblasts were also characterized. It was demonstrated that a 3% stabilizer solution provided a preparation of Fe₃O₄@Ag particles, but its stabilizing effect was not sufficient, as a suspension with micrometric particles was obtained; thus it was necessary to apply 4 h of sonication for their crushing. Next, the oil/water reaction medium was verified as beneficial in terms of nanoparticle formation. In such reaction conditions, the formation of particle agglomerates was strongly limited, and after 15 min of sonication a suspension containing only nanoparticles was obtained. The presence of a nanosilver shell was confirmed spectrophotometrically via XRD and SEM-EDS techniques. Importantly, the developed nanomaterials showed no cytotoxicity towards murine fibroblasts and no pro-inflammatory activity.

The Synthesis Methodology and Characterization of Nanogold-Coated Fe3O4 Magnetic Nanoparticles

Core-shell nanostructures are widely used in many fields, including medicine and the related areas. An example of such structures are nanogold-shelled Fe₃O₄ magnetic nanoparticles. Systems consisting of a magnetic core and a shell made from nanogold show unique optical and magnetic properties. Thus, it is essential to develop the methodology of their preparation. Here, we report the synthesis methodology of Fe₃O₄@Au developed so as to limit their agglomeration and increase their stability. For this purpose, the impact of the reaction environment was verified. The properties of the particles were characterized via UV-Vis spectrophotometry, dynamic light scattering (DLS), X-ray diffraction (XRD), and Scanning Electron Microscopy-Energy Dispersive X-ray analysis (SEM-EDS technique). Moreover, biological investigations, including determining the cytotoxicity of the particles towards murine fibroblasts and the pro-inflammatory activity were also performed. It was demonstrated that the application of an oil and water reaction environment leads to the preparation of the particles with lower polydispersity, whose agglomerates’ disintegration is 24 times faster than the disintegration of nanoparticle agglomerates formed as a result of the reaction performed in a water environment. Importantly, developed Fe₃O₄@Au nanoparticles showed no pro-inflammatory activity regardless of their concentration and the reaction environment applied during their synthesis and the viability of cell lines incubated for 24 h with the particle suspensions was at least 92.88%. Thus, the developed synthesis methodology of the particles as well as performed investigations confirmed a great application potential of developed materials for biomedical purposes.

Comparative Investigation of Cellular Effects of Polyethylene Glycol (PEG) Derivatives

Nowadays, polyethylene glycols referred to as PEGs are widely used in cosmetics, consumer care products, and the pharmaceutical industry. Their advantageous properties such as chemical stability, low immunogenicity, and high tolerability explain why PEGs are applied in many fields of pharmaceutical formulations including parenteral, topical, ophthalmic, oral, and rectal preparations and also in modern drug delivery systems. Given their extensive use, they are considered a well-known group of chemicals. However, the number of large-scale comparative studies involving multiple PEGs of wide molecular weight range is low, as in most cases biological effects are estimated upon molecular weight. The aim of this publication was to study the action of PEGs on Caco-2 cells and G. mellonella larvae and to calculate the correlation of these effects with molecular weight and osmolality. Eleven PEGs of different molecular weight were used in our experiments: PEG 200, PEG 300, PEG 400, PEG 600, PEG 1000, PEG 1500, PEG 4000, PEG 8000, PEG 10,000, 12,000, and PEG 20,000. The investigated cellular effects included cytotoxicity (MTT and Neutral Red assays, flow cytometry with propidium iodide and annexin V) and autophagy. The osmolality of different molecular weight PEGs with various concentrations was measured by a vapor pressure osmometer OSMOMAT 070 and G. mellonella larvae were injected with the solutions of PEGs. Sorbitol was used as controls of the same osmolality. Statistical correlation was calculated to describe the average molecular weight dependence of the different measured effects. Osmolality, the cytotoxicity assays, flow cytometry data, and larvae mortality had significant correlation with the structure of the PEGs, while autophagosome formation and the proportion of early apoptotic cells showed no statistical correlation. Overall, it must be noted that PEGs must be tested individually for biological effects as not all effects can be estimated by the average molecular weight.

Magnetic AgNPs/Fe3O4@chitosan/PVA nanocatalyst for fast one-pot green synthesis of propargylamine and triazole derivatives

A new green magnetic nanocatalyst was introduced for one-pot fast synthesis of propargylamine and triazole derivatives.