Development and Evaluation of Alginate Membranes with Curcumin-Loaded Nanoparticles for Potential Wound-Healing Applications

Biopolymeric Insulin Membranes for Antimicrobial, Antioxidant, and Wound Healing Applications

Delayed wound healing increases the wound's vulnerability to possible infections, which may have lethal outcomes. The treatments available can be effective, but the urgency is not fully encompassed. The drug repositioning strategy proposes effective alternatives for enhancing medical therapies for chronic diseases. Likewise, applying wound dressings as biodegradable membranes is extremely attractive due to their ease of application, therapeutic effectiveness, and feasibility in industrial manufacturing. This article aims to demonstrate the pleiotropic effects during insulin repositioning in wound closure by employing a biopolymeric membrane-type formulation with insulin. We prepared biopolymeric membranes with sodium alginate cross-linked with calcium chloride, supported in a mixture of xanthan gum and guar gum, and plasticized with glycerol and sorbitol. Human insulin was combined with poloxamer 188 as a protein stabilizing agent. Our investigation encompassed physicochemical and mechanical characterization, antioxidant and biological activity through antibacterial tests, cell viability assessments, and scratch assays as an in vitro and in vivo wound model. We demonstrated that our biopolymeric insulin membranes exhibited adequate manipulation and suitable mechanical resistance, transparency, high swelling capability (1100%), and 30% antioxidant activity. Furthermore, they exhibited antibacterial activity (growth inhibition of S. aureus at 85% and P. aeruginosa at 75%, respectively), and insulin promoted wound closure in vitro with a 5.5-fold increase and 72% closure at 24 h. Also, insulin promoted in vivo wound closure with a 3.2-fold increase and 92% closure at 10 days compared with the groups without insulin, and this is the first report that demonstrates this therapeutic effect with two administrations of 0.7 IU. In conclusion, we developed a multifunctional insulin-loaded biopolymeric membrane in this study, with the main activity derived from insulin's role in wound closure and antioxidant activity, augmented by the antimicrobial effect attributed to the polymer poloxamer 188. The synergistic combination of excipients enhances its usefulness and highlights our innovation as a promising material in wound healing materials.

Alginate-Based Encapsulation Fabrication Technique for Drug Delivery: An Updated Review of Particle Type, Formulation Technique, Pharmaceutical Ingredient, and Targeted Delivery System

Alginate is a natural biopolymer widely studied for pharmaceutical applications due to its biocompatibility, low toxicity, and mild gelation abilities. This review summarizes recent advances in alginate-based encapsulation systems for targeted drug delivery. Alginate formulations like microparticles, nanoparticles, microgels, and composites fabricated by methods including ionic gelation, emulsification, spray drying, and freeze drying enable tailored drug loading, enhanced stability, and sustained release kinetics. Alginate microspheres prepared by spray drying or ionic gelation provide gastric protection and colon-targeted release of orally delivered drugs. Alginate nanoparticles exhibit enhanced cellular uptake and tumor-targeting capabilities through the enhanced permeation and retention effect. Crosslinked alginate microgels allow high drug loading and controlled release profiles. Composite alginate gels with cellulose, chitosan, or inorganic nanomaterials display improved mechanical properties, mucoadhesion, and tunable release kinetics. Alginate-based wound dressings containing antimicrobial nanoparticles promote healing of burns and chronic wounds through sustained topical delivery. Although alginate is well-established as a pharmaceutical excipient, more extensive in vivo testing is needed to assess clinical safety and efficacy of emerging formulations prior to human trials. Future opportunities include engineered systems combining stimuli-responsiveness, active targeting, and diagnostic capabilities. In summary, this review discusses recent advances in alginate encapsulation techniques for oral, transdermal, and intravenous delivery, with an emphasis on approaches enabling targeted and sustained drug release for enhanced therapeutic outcomes.

The Fabrication of Polymer-Based Curcumin-Loaded Formulation as a Drug Delivery System: An Updated Review from 2017 to the Present

Turmeric contains curcumin, a naturally occurring compound with noted anti-inflammatory and antioxidant properties that may help fight cancer. Curcumin is readily available, nontoxic, and inexpensive. At high doses, it has minimal side effects, suggesting it is safe for human use. However, curcumin has extremely poor bioavailability and biodistribution, which further hamper its clinical applications. It is commonly administered through oral and transdermal routes in different forms, where the particle size is one of the most common barriers that decreases its absorption through biological membranes on the targeted sites and limits its clinical effectiveness. There are many studies ongoing to overcome this problem. All of this motivated us to conduct this review that discusses the fabrication of polymer-based curcumin-loaded formulation as an advanced drug delivery system and addresses different approaches to overcoming the existing barriers and improving its bioavailability and biodistribution to enhance the therapeutic effects against cancer and other diseases.

Sustainable Sources of Raw Materials for Additive Manufacturing of Bone-Substituting Biomaterials

The need for sustainable development has never been more urgent, as the world continues to struggle with environmental challenges, such as climate change, pollution, and dwindling natural resources. The use of renewable and recycled waste materials as a source of raw materials for biomaterials and tissue engineering is a promising avenue for sustainable development. Although tissue engineering has rapidly developed, the challenges associated with fulfilling the increasing demand for bone substitutes and implants remain unresolved, particularly as the global population ages. This review provides an overview of waste materials, such as eggshells, seashells, fish residues, and agricultural biomass, that can be transformed into biomaterials for bone tissue engineering. While the development of recycled metals is in its early stages, the use of probiotics and renewable polymers to improve the biofunctionalities of bone implants is highlighted. Despite the advances of additive manufacturing (AM), studies on AM waste-derived bone-substitutes are limited. It is foreseeable that AM technologies can provide a more sustainable alternative to manufacturing biomaterials and implants. The preliminary results of eggshell and seashell-derived calcium phosphate and rice husk ash-derived silica can likely pave the way for more advanced applications of AM waste-derived biomaterials for sustainably addressing several unmet clinical applications.

Films for Wound Healing Fabricated Using a Solvent Casting Technique

Wound healing is a complex process that involves restoring the structure of damaged tissues through four phases: hemostasis, inflammation, proliferation, and remodeling. Wound dressings are the most common treatment used to cover wounds, reduce infection risk and the loss of physiological fluids, and enhance wound healing. Despite there being several types of wound dressings based on different materials and fabricated through various techniques, polymeric films have been widely employed due to their biocompatibility and low immunogenicity. Furthermore, they are non-invasive, easy to apply, allow gas exchange, and can be transparent. Among different methods for designing polymeric films, solvent casting represents a reliable, preferable, and highly used technique due to its easygoing and relatively low-cost procedure compared to sophisticated methods such as spin coating, microfluidic spinning, or 3D printing. Therefore, this review focuses on the polymeric dressings obtained using this technique, emphasizing the critical manufacturing factors related to pharmaceuticals, specifically discussing the formulation variables necessary to create wound dressings that demonstrate effective performance.

Curcumin-based nanoformulations alleviate wounds and related disorders: A comprehensive review

Despite numerous advantages, curcumin's (CUR) low solubility and low bioavailability limit its employment as a free drug. CUR-incorporated nanoformulation enhances the bioavailability and angiogenesis, collagen deposition, fibroblast proliferation, reepithelization, collagen synthesis, neovascularization, and granulation tissue formation in different wounds. Designing nanoformulations with controlled-release properties ensure the presence of CUR in the defective area during treatment. Different nanoformulations encompassing nanofibers, nanoparticles (NPs), nanospray, nanoemulsion, nanosuspension, nanoliposome, nanovesicle, and nanomicelle were described in the present study comprehensively. Moreover, for some other systems which contain nano-CUR or CUR nanoformulations, including some nanofibers, films, composites, scaffolds, gel, and hydrogels seems the CUR-loaded NPs incorporation has better control of the sustained release, and thereby, the presence of CUR until the final stages of wound healing is more possible. Incorporating CUR-loaded chitosan NPs into nanofiber increased the release time, while 80% of CUR was released during 240 h (10 days). Therefore, this system can guarantee the presence of CUR during the entire healing period. Furthermore, porous structures such as sponges, aerogels, some hydrogels, and scaffolds disclosed promising performance. These architectures with interconnected pores can mimic the native extracellular matrix, thereby facilitating attachment and infiltration of cells at the wound site, besides maintaining a free flow of nutrients and oxygen within the three-dimensional structure essential for rapid and proper wound healing, as well as enhancing mechanical strength.

Enhancing chemical and physical stability of pharmaceuticals using freeze-thaw method: challenges and opportunities for process optimization through quality by design approach

The freeze-thaw (F/T) method is commonly employed during the processing and handling of drug substances to enhance their chemical and physical stability and obtain pharmaceutical applications such as hydrogels, emulsions, and nanosystems (e.g., supramolecular complexes of cyclodextrins and liposomes). Using F/T in manufacturing hydrogels successfully prevents the need for toxic cross-linking agents; moreover, their use promotes a concentrated product and better stability in emulsions. However, the use of F/T in these applications is limited by their characteristics (e.g., porosity, flexibility, swelling capacity, drug loading, and drug release capacity), which depend on the optimization of process conditions and the kind and ratio of polymers, temperature, time, and the number of cycles that involve high physical stress that could change properties associated to quality attributes. Therefore, is necessary the optimization of F/T conditions and variables. The current research regarding F/T is focused on enhancing the formulations, the process, and the use of this method in pharmaceutical, clinical, and biological areas. The present review aims to discuss different studies related to the impact and effects of the F/T process on the physical, mechanical, and chemical properties (porosity, swelling capacity) of diverse pharmaceutical applications with an emphasis on their formulation properties, the method and variables used, as well as challenges and opportunities in developing. Finally, we review the experimental approach for choosing the standard variables studied in the F/T method applying the systematic methodology of quality by design.

Alginate-Based Materials Loaded with Nanoparticles in Wound Healing

Alginate is a naturally derived polysaccharide widely applied in drug delivery, as well as regenerative medicine, tissue engineering and wound care. Due to its excellent biocompatibility, low toxicity, and the ability to absorb a high amount of exudate, it is widely used in modern wound dressings. Numerous studies indicate that alginate applied in wound care can be enhanced with the incorporation of nanoparticles, revealing additional properties beneficial in the healing process. Among the most extensively explored materials, composite dressings with alginate loaded with antimicrobial inorganic nanoparticles can be mentioned. However, other types of nanoparticles with antibiotics, growth factors, and other active ingredients are also investigated. This review article focuses on the most recent findings regarding novel alginate-based materials loaded with nanoparticles and their applicability as wound dressings, with special attention paid to the materials of potential use in the treatment of chronic wounds.

ZIF-8 integrated with polydopamine coating as a novel nano-platform for skin-specific drug delivery

Metal-organic frameworks (MOFs) are highly promising as a novel class of drug delivery carriers; however, there are few reports about their application in nanoparticle-based formulations for dermal administration. In this work, we developed a novel kind of nanoparticular system based on zeolitic imidazolate framework-8 (ZIF-8) and polydopamine (PDA) modification for improving the dermal delivery of 5-fluorouracil (5-FU). The structures and properties of the prepared nanoparticles were characterized using a variety of analytical methods. Their ex vivo delivery performance in the skin was investigated using Franz cells, and the underlying mechanisms were studied via confocal laser scanning microscopy (CLSM) and hematoxylin-eosin (HE) experiments which were employed to probe the penetration pathway and the interaction between nanoparticles and the skin. The results revealed that both 5-FU@ZIF-8 and ZIF-8@5-FU@PDA had an enhancement effect on the deposition of 5-FU in the skin, and the surface coating of PDA could further reduce drug permeation across the skin, especially in the case of impaired skin, in comparison with the drug solution. The CLSM study using rhodamine 6G as the fluorescent probe to mimic 5-FU indicated that ZIF-8 and ZIF-8@PDA could deliver their payloads into the skin via two pathways, i.e., intercellular and follicular ones, and the follicular route was shown to be particularly important for ZIF-8@PDA, in which the drug and carrier were co-delivered into the skin as an intact particle. This study provides evidence for using ZIF-8 and PDA modification for skin-specific drug delivery and offers an effective avenue to develop novel nanoplatforms for dermal application to treat skin diseases.

PVA, licorice, and collagen (PLC) based hybrid bio-nano scaffold for wound healing application

Nanofibrous scaffolds with core-shell structures can deliver bioactive agents, augment mechanical properties, provide a high surface area to volume ratio, and most importantly mimic the structure of extracellular matrix (ECM) which enables to maintain of a moist environment, elimination of excess exudates and provide antibacterial properties to impede infections. This study has developed PVA, licorice, and collagen (PLC) based hybrid bio-nano scaffold by co-axial electrospinning technique for enhancing wound closure. The core layer was made by PVA & licorice extract and shell layer was created by collagen & licorice extract solution. The morphology, moisture management properties, presence of constituent polymer, thermal behavior, and mechanical properties of the developed samples were characterized by FE-SEM, moisture management tester (MMT), FT/IR, TGA, tensile testing machine. Furthermore, in vitro antibacterial assay was conducted by Kirby-Bauer disk diffusion method for investigating antibacterial properties and an in-vivo wound healing assessment was employed by observing the wound healing. Then FE-SEM images showed the lowest and highest average diameters 119 nm and 154 nm respectively, FT/IR spectra ensured the presence of all materials in the sample. Furthermore, the moisture management test result demonstrated slow absorbing and slow drying scaffolds which emphasized the eligibility of the sample to be an ideal candidate for wound healing. Moreover, the minimum and maximum zones of inhibition (ZOI) were found 7 mm and 8 mm against the bacteria Staphylococcus aureus. Finally, an in vivo wound healing assessment revealed a better healing performance of the developed samples after 10 days.

Degradable hydrogel fibers encapsulate and deliver metformin and periodontal ligament stem cells for dental and periodontal regeneration

Human periodontal ligament stem cells (hPDLSCs) are promising cells for dental and periodontal regeneration. This study aimed to develop novel alginate-fibrin fibers that encapsulates hPDLSCs and metformin, to investigate the effect of metformin on the osteogenic differentiation of hPDLSCs, and to determine the regulatory role of the Shh/Gli1 signaling pathway in the metformin-induced osteogenic differentiation of hPDLSCs for the first time. CCK8 assay was used to evaluate hPDLSCs. Alkaline phosphatase (ALP) staining, alizarin red S staining, and the expression of osteogenic genes were evaluated. Metformin and hPDLSCs were encapsulated in alginate-fibrinogen solutions, which were injected to form alginate-fibrin fibers. The activation of Shh/Gli1 signaling pathway was examined using qRT-PCR and western blot. A mechanistic study was conducted by inhibiting the Shh/Gli1 pathway using GANT61. The administration of 50 μM metformin resulted in a significant upregulation of osteogenic gene expression in hPDLSCs by 1.4-fold compared to the osteogenic induction group (P < 0.01), including ALP and runt-related transcription factor-2 (RUNX2). Furthermore, metformin increased ALP activity by 1.7-fold and bone mineral nodule formation by 2.6-fold (P<0.001). We observed that hPDLSCs proliferated with the degradation of alginate-fibrin fibers, and metformin induced their differentiation into the osteogenic lineage. Metformin also promoted the osteogenic differentiation of hPDLSCs by upregulating the Shh/Gli1 signaling pathway by 3- to 6- fold compared to the osteogenic induction group (P<0.001). The osteogenic differentiation ability of hPDLSCs were decreased 1.3- to 1.6-fold when the Shh/Gli1 pathway was inhibited, according to ALP staining and alizarin red S staining (P<0.01). Metformin enhanced the osteogenic differentiation of hPDLSCs via the Shh/Gli1 signaling pathway. Degradable alginate-fibrin hydrogel fibers encapsulating hPDLSCs and metformin have significant potential for use in dental and periodontal tissue engineering applications. Alginate-fibrin fibers encapsulating hPDLSCs and metformin have a great potential for use in the treatment of maxillofacial bone defects caused by trauma, tumors, and tooth extraction. Additionally, they may facilitate the regeneration of periodontal tissue in patients with periodontitis.

Development of a Polymeric Membrane Impregnated with Poly-Lactic Acid (PLA) Nanoparticles Loaded with Red Propolis (RP)

The main objectives of this study were to develop and characterize hydrophilic polymeric membranes impregnated with poly-lactic acid (PLA) nanoparticles (NPs) combined with red propolis (RP). Ultrasonic-assisted extraction was used to obtain 30% (w/v) red propolis hydroalcoholic extract (RPE). The NPs (75,000 g mol-1) alone and incorporated with RP (NPRP) were obtained using the solvent emulsification and diffusion technique. Biopolymeric hydrogel membranes (MNPRP) were obtained using carboxymethylcellulose (CMC) and NPRP. Their characterization was performed using thermal analysis, Fourier transform infrared (FTIR), total phenols (TPC) and flavonoids contents (TFC), and antioxidant activity through the radical scavenging assay with 2,2-diphenyl-1-picrylhydrazyl radical (DPPH) and Ferric reducing antioxidant power (FRAP). The identification and quantification of significant RP markers were performed through UPLC-DAD. The NPs were evaluated for particle size, polydispersity index, and zeta potential. The TPC for RPE, NPRP, and MNPRP was 240.3 ± 3.4, 191.7 ± 0.3, and 183.4 ± 2.1 mg EGA g-1, while for TFC, the value was 37.8 ± 0.9, 35 ± 3.9, and 26.8 ± 1.9 mg EQ g-1, respectively. Relevant antioxidant activity was also observed by FRAP, with 1400.2 (RPE), 1294.2 (NPRP), and 696.2 µmol Fe2+ g-1 (MNPRP). The primary markers of RP were liquiritigenin, isoliquiritigenin, and formononetin. The particle sizes were 194.1 (NPs) and 361.2 nm (NPRP), with an encapsulation efficiency of 85.4%. Thermal analysis revealed high thermal stability for the PLA, nanoparticles, and membranes. The DSC revealed no interaction between the components. FTIR allowed for characterizing the RPE encapsulation in NPRP and CMC for the MNPRP. The membrane loaded with NPRP, fully characterized, has antioxidant capacity and may have application in the treatment of skin wounds.

Fabrication and Preliminary In Vitro Evaluation of 3D-Printed Alginate Films with Cannabidiol (CBD) and Cannabigerol (CBG) Nanoparticles for Potential Wound-Healing Applications

In this study, drug carrier nanoparticles comprised of Pluronic-F127 and cannabidiol (CBD) or cannabigerol (CBG) were developed, and their wound healing action was studied. They were further incorporated in 3D printed films based on sodium alginate. The prepared films were characterized morphologically and physicochemically and used to evaluate the drug release profiles of the nanoparticles. Additional studies on their water loss rate, water retention capacity, and 3D-printing shape fidelity were performed. Nanoparticles were characterized physicochemically and for their drug loading performance. They were further assessed for their cytotoxicity (MTT Assay) and wound healing action (Cell Scratch Assay). The in vitro wound-healing study showed that the nanoparticles successfully enhanced wound healing in the first 6 h of application, but in the following 6 h they had an adverse effect. MTT assay studies revealed that in the first 24 h, a concentration of 0.1 mg/mL nanoparticles resulted in satisfactory cell viability, whereas CBG nanoparticles were safe even at 48 h. However, in higher concentrations and after a threshold of 24 h, the cell viability was significantly decreased. The results also presented mono-disperse nano-sized particles with diameters smaller than 200 nm with excellent release profiles and enhanced thermal stability. Their entrapment efficiency and drug loading properties were higher than 97%. The release profiles of the active pharmaceutical ingredients from the films revealed a complete release within 24 h. The fabricated 3D-printed films hold promise for wound healing applications; however, more studies are needed to further elucidate their mechanism of action.

Stability Phenomena Associated with the Development of Polymer-Based Nanopesticides

Pesticides have been used in agricultural activity for decades because they represent the first defense against pathogens, harmful insects, and parasitic weeds. Conventional pesticides are commonly employed at high dosages to prevent their loss and degradation, guaranteeing effectiveness; however, this results in a large waste of resources and significant environmental pollution. In this regard, the search for biocompatible, biodegradable, and responsive materials has received greater attention in the last years to achieve the obtention of an efficient and green pesticide formulation. Nanotechnology is a useful tool to design and develop “nanopesticides” that limit pest degradation and ensure a controlled release using a lower concentration than the conventional methods. Besides different types of nanoparticles, polymeric nanocarriers represent the most promising group of nanomaterials to improve the agrochemicals’ sustainability due to polymers’ intrinsic properties. Polymeric nanoparticles are biocompatible, biodegradable, and suitable for chemical surface modification, making them attractive for pesticide delivery. This review summarizes the current use of synthetic and natural polymer-based nanopesticides, discussing their characteristics and their most common design shapes. Furthermore, we approached the instability phenomena in polymer-based nanopesticides and strategies to avoid it. Finally, we discussed the environmental risks and future challenges of polymeric nanopesticides to present a comprehensive analysis of this type of nanosystem.

Roles of MicroRNA-21 in Skin Wound Healing: A Comprehensive Review

MicroRNA-21 (miR-21), one of the early mammalian miRNAs identified, has been detected to be upregulated in multiple biological processes. Increasing evidence has demonstrated the potential values of miR-21 in cutaneous damage and skin wound healing, but lack of a review article to summarize the current evidence on this issue. Based on this review, relevant studies demonstrated that miR-21 played an essential role in wound healing by constituting a complex network with its targeted genes (i.e., PTEN, RECK. SPRY1/2, NF-κB, and TIMP3) and the cascaded signaling pathways (i.e., MAPK/ERK, PI3K/Akt, Wnt/β-catenin/MMP-7, and TGF-β/Smad7-Smad2/3). The treatment effectiveness developed by miR-21 might be associated with the promotion of the fibroblast differentiation, the improvement of angiogenesis, anti-inflammatory, enhancement of the collagen synthesis, and the re-epithelialization of the wound. Currently, miRNA nanocarrier systems have been developed, supporting the feasibility clinical feasibility of such miR-21-based therapy. After further investigations, miR-21 may serve as a potential therapeutic target for wound healing.

Marine Polysaccharides for Wound Dressings Application: An Overview

Wound dressings have become a crucial treatment for wound healing due to their convenience, low cost, and prolonged wound management. As cutting-edge biomaterials, marine polysaccharides are divided from most marine organisms. It possesses various bioactivities, which allowing them to be processed into various forms of wound dressings. Therefore, a comprehensive understanding of the application of marine polysaccharides in wound dressings is particularly important for the studies of wound therapy. In this review, we first introduce the wound healing process and describe the characteristics of modern commonly used dressings. Then, the properties of various marine polysaccharides and their application in wound dressing development are outlined. Finally, strategies for developing and enhancing marine polysaccharide wound dressings are described, and an outlook of these dressings is given. The diverse bioactivities of marine polysaccharides including antibacterial, anti-inflammatory, haemostatic properties, etc., providing excellent wound management and accelerate wound healing. Meanwhile, these biomaterials have higher biocompatibility and biodegradability compared to synthetic ones. On the other hand, marine polysaccharides can be combined with copolymers and active substances to prepare various forms of dressings. Among them, emerging types of dressings such as nanofibers, smart hydrogels and injectable hydrogels are at the research frontier of their development. Therefore, marine polysaccharides are essential materials in wound dressings fabrication and have a promising future.

Superior Technique for the Production of Agarose Dressing Containing Sericin and Its Wound Healing Property

Finding a simple and eco-friendly production technique that matches to the natural agent and results in a truly valuable natural scaffold production is still limited amongst the intensively competitive natural scaffold development. Therefore, the purpose of this study was to develop natural scaffolds that were environmentally friendly, low cost, and easily produced, using natural agents and a physical crosslinking technique. These scaffolds were prepared from agarose and sericin using the freeze-drying method (D) or freeze-thawing together with the freeze-drying method (TD). Moreover, plasticizers were added into the scaffold to improve their properties. Their physical, mechanical, and biological properties were investigated. The results showed that scaffolds that were prepared using the TD method had stronger bonding between sericin and other compounds, leading to a low swelling ratio and low protein release of the scaffolds. This property may be applied in the development of further material as a controlled drug release scaffold. Adding plasticizers, especially glycerin, into the scaffolds significantly increased elongation properties, leading to an increase in elasticity of the scaffold. Moreover, all scaffolds could activate cell migration, which had an advantage on wound healing acceleration. Accordingly, this study was successful in developing natural scaffolds using natural agents and simple and green crosslinking methods.

Recent advances on polymeric hydrogels as wound dressings

Severe hemorrhage is a leading cause of high mortality in critical situations like disaster, accidents, and warfare. The resulting wounds could induce severe physical and psychological trauma to patients and also bring an immense socio-economic burden. Hence, rapid hemostasis and wound healing techniques have become critical initiatives for life-saving treatment. Although traditional methods relying on bandages and gauzes are effective in controlling hemorrhage, they suffer from several limitations: nonbiodegradability, being susceptible to infection, being unsuitable for the irregular wound, secondary tissue damage, and being almost ineffective for wound healing. Owing to the merits of high porosity, good biocompatibility, tunable physicochemical properties, and being beneficial for wound healing, hydrogels with excellent performance have drawn intensive attention and numerous novel effective hydrogel dressings have been widely developed. In this Review, after introducing some commonly used strategies for the synthesis of hydrogels, the most recent progress on polymer-based hydrogels as wound dressings is discussed. Particularly, their hemostasis, antibacterial, and biodegradation properties are introduced. Finally, challenges and future perspectives about the development of hydrogels for wound dressings are outlined.

Bio-functional hydrogel membranes loaded with chitosan nanoparticles for accelerated wound healing

Wounds are often recalcitrant to traditional wound dressings and a bioactive and biodegradable wound dressing using hydrogel membranes can be a promising approach for wound healing applications. The present research aimed to design hydrogel membranes based on hyaluronic acid, pullulan and polyvinyl alcohol and loaded with chitosan based cefepime nanoparticles for potential use in cutaneous wound healing. The developed membranes were evaluated using dynamic light scattering, proton nuclear magnetic resonance, Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy. The results indicated the novel crosslinking and thermal stability of the fabricated hydrogel membrane. The in vitro analysis demonstrates that the developed membrane has water vapors transmission rate (WVTR) between 2000 and 2500 g/m²/day and oxygen permeability between 7 and 14 mg/L, which lies in the range of an ideal dressing. The swelling capacity and surface porosity to liberate encapsulated drug (cefepime) in a sustained manner and 88% of drug release was observed. The cefepime loaded hydrogel membrane demonstrated a higher zone of inhibition against Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli and excisional rat model exhibit expeditious recovery rate. The developed hydrogel membrane loaded with cefepime nanoparticles is a promising approach for topical application and has greater potential for an accelerated wound healing process.

Targeted Delivery of Erythropoietin Hybridized with Magnetic Nanocarriers for the Treatment of Central Nervous System Injury: A Literature Review

Although the incidence of central nervous system injuries has continued to rise, no promising treatments have been elucidated. Erythropoietin plays an important role in neuroprotection and neuroregeneration as well as in erythropoiesis. Moreover, the current worldwide use of erythropoietin in the treatment of hematologic diseases allows for its ready application in patients with central nervous system injuries. However, erythropoietin has a very short therapeutic time window (within 6–8 hours) after injury, and it has both hematopoietic and nonhematopoietic receptors, which exhibit heterogenic and phylogenetic differences. These differences lead to limited amounts of erythropoietin binding to in situ erythropoietin receptors. The lack of high-quality evidence for clinical use and the promising results of in vitro/in vivo models necessitate fast targeted delivery agents such as nanocarriers. Among current nanocarriers, noncovalent polymer-entrapping or polymer-adsorbing erythropoietin obtained by nanospray drying may be the most promising. With the incorporation of magnetic nanocarriers into an erythropoietin polymer, spatiotemporal external magnetic navigation is another area of great interest for targeted delivery within the therapeutic time window. Intravenous administration is the most readily used route. Manufactured erythropoietin nanocarriers should be clearly characterized using bioengineering analyses of the in vivo size distribution and the quality of entrapment or adsorption. Further preclinical trials are required to increase the therapeutic bioavailability (in vivo biological identity alteration, passage through the lung capillaries or the blood brain barrier, and timely degradation followed by removal of the nanocarriers from the body) and decrease the adverse effects (hematological complications, neurotoxicity, and cytotoxicity), especially of the nanocarrier.

Nanoparticle-Based Wound Dressing: Recent Progress in the Detection and Therapy of Bacterial Infections

Bacterial infections in wounds often delay the healing process, and may seriously threaten human life. It is urgent to develop wound dressings to effectively detect and treat bacterial infections. Nanoparticles have been extensively used in wound dressings because of their specific properties. This review highlights the recent progress on nanoparticle-based wound dressings for bacterial detection and therapy. Specifically, nanoparticles have been applied as intrinsic antibacterial agents or drug delivery vehicles to treat bacteria in wounds. Moreover, nanoparticles with photothermal or photodynamic property have also been explored to endow wound dressings with significant optical properties to further enhance their bactericidal effect. More interestingly, nanoparticle-based smart dressings have been recently explored for bacteria detection and treatment, which enables an accurate assessment of bacterial infection and a more precise control of on-demand therapy.

Development of curcumin-loaded chitosan/pluronic membranes for wound healing applications

The emergence of new materials with improved antibacterial, anti-inflammatory and healing properties compared to conventional wound dressings has both social and economic appeal. In this study, novel chitosan-based (CTS) membranes containing curcumin (CUR) incorporated in Pluronic (PLU) copolymers were developed and characterized to obtain suitable properties for applications as a wound healing dressing. The mechanical, thermal, swelling, wettability, release and permeation properties were evaluated by DSC, TGA, water contact angle measurements, FTIR, fluorescence and microscopic techniques. Membranes containing PLU and CUR presented wettability close to the ideal range for interaction with cellular components (contact angle ~40-70°), improved mechanical properties, higher thermal stability, high swelling degree (>800%) and CUR release (~60%) compared to samples without PLU addition. A higher retention of CUR in the epidermis than in the dermis layer was observed, which also was confirmed by confocal microscopy. Furthermore, the CTS-PLU membranes loaded with CUR showed to be active against Staphylococcus aureus and Pseudomonas aeruginosa (MIC = 25 and 100 mg mL^-1, respectively), the microbial species most present in chronic wounds. Overall, the CTS-PLU-CUR membranes presented suitable properties to act as a new wound healing dressing formulation and in vivo studies should be performed to confirm these benefits.

Curcumin-loaded poly-ε-caprolactone nanoparticles show antioxidant and cytoprotective effects in the presence of reactive oxygen species

Interest in novel delivery systems that improve the cytoprotective and antioxidant effects of natural drugs has been explored recently due to the increase in the incidence of chronic diseases in which oxidation mechanisms are involved. Curcumin is a phenolic compound recently shown to be clinically significant due to its anti-inflammatory, anticancer, and antioxidant properties. However, this molecule possesses a low bioavailability and a high degradation rate in the presence of light. Therefore, we prepared nanoparticles of poly-ε-caprolactone and Pluronic® F-68 as a stabilizer and loaded these with curcumin (Cur–PCL nanoparticles) for antioxidant and cytoprotective applications. The nanoparticles did not induce cell death, but they did reduce cell proliferation without affecting cell migration and cell adhesion. Interestingly, Cur–PCL and poly-ε-caprolactone nanoparticles reduced the oxidative stress induced by hydrogen peroxide and presented a cytoprotective effect. Remarkably, poly-ε-caprolactone nanoparticles showed a decrement of 30% in reactive oxygen species presence compared to the positive control. The decrease of reactive oxygen species derived from the administration of poly-ε-caprolactone nanoparticles could be attributed to the presence of Pluronic® F-68. Taken together, these data indicated that these nanoparticles might have a clinical application in disorders related to reactive oxygen species formation.

Pharmaceutical Particulates and Membranes for the Delivery of Drugs and Bioactive Molecules

The delivery of drugs and bioactive molecules using pharmaceutical particulates and membranes are of great significance for various applications such as the treatment of secondary infections, cancer treatment, skin regeneration, orthopedic applications and others [...].

Magnetically guided targeted delivery of erythropoietin using magnetic nanoparticles: Proof of concept

The objective of this proof-of-concept study was to demonstrate the targeted delivery of erythropoietin (EPO) using magnetically guided magnetic nanoparticles (MNPs).MNPs consisting of a ferric-ferrous mixture (FeCl3·6H2O and FeCl2·4H2O) were prepared using a co-precipitation method. The drug delivery system (DDS) was manufactured via the spray-drying technique using a nanospray-dryer. The DDS comprised 7.5 mg sodium alginate, 150 mg MNPs, and 1000 IU EPO.Scanning electron microscopy revealed DDS particles no more than 500 nm in size. Tiny particles on the rough surfaces of the DDS particles were composed of MNPs and/or EPO, unlike the smooth surfaces of the only alginate particles. Transmission electron microscopy showed the tiny particles from 5 to 20 nm in diameter. Fourier-transform infrared spectroscopy revealed DDS peaks characteristic of MNPs as well as of alginate. Thermal gravimetric analysis presented that 50% of DDS weight was lost in a single step around 500°C. The mode size of the DDS particles was approximately 850 nm under in vivo conditions. Standard soft lithography was applied to DDS particles prepared with fluorescent beads using a microchannel fabricated to have one inlet and two outlets in a Y-shape. The fluorescent DDS particles reached only one outlet reservoir in the presence of a neodymium magnet. The neurotoxicity was evaluated by treating SH-SY5Y cells in 48-well plates (1 × 10 cells/well) with 2 μL of a solution containing sodium alginate (0.075 mg/mL), MNPs (1.5 mg/mL), or sodium alginate + MNPs. A cell viability assay kit was used to identify a 93% cell viability after MNP treatment and a 94% viability after sodium alginate + MNP treatment, compared with the control. As for the DDS particle neurotoxicity, a 95% cell viability was noticed after alginate-encapsulated MNPs treatment and a 93% cell viability after DDS treatment, compared with the control.The DDS-EPO construct developed here can be small under in vivo conditions enough to pass through the lung capillaries with showing the high coating efficiency. It can be guided using magnetic control without displaying significant neurotoxicity in the form of solution or particles.

Gelatin-Alginate Complexes for EGF Encapsulation: Effects of H-Bonding and Electrostatic Interactions

Gelatin Type A (GA) and sodium alginate (SA) complexes were explored to encapsulate epidermal growth factor (EGF), and thereby to circumvent its proteolytic degradation upon topical application to chronic wounds. Phase diagrams were constructed based on turbidity as a function of GA to SA ratio and pH. Various GA-SA mixtures were compared for polydispersity index, zeta potential, Z-average, and ATR-FTIR spectra. Trypsin digestion and human dermal fibroblast scratch wound assay were done to evaluate the effects of EGF encapsulation. The onset pH values for coacervation and precipitation were closer together in high molecular weight GA (HWGA)-SA reaction mixtures than in low molecular weight GA (LWGA)-SA, which was attributed to strong H-bonding interactions between HWGA and SA probed by ATR-FTIR. EGF incorporation in both HWGA-SA precipitates and LWGA-SA coacervates below the isoelectric point of EGF, but not above it, suggests the contribution of electrostatic interactions between EGF and SA. EGF encapsulated in LWGA-SA coacervates was effectively protected from trypsin digestion and showed better in vitro scratch wound activity compared to free EGF. LWGA-SA coacervates are suggested as a novel delivery system for topical application of EGF to chronic wounds.