Chitosan: A promising therapeutic agent and effective drug delivery system in managing diabetes mellitus

Bioactive carbohydrate polymers from marine sources as potent nutraceuticals in modulating obesity: a review

The majority of bioactive polysaccharides are present in some marine creatures. These polysaccharides are considered as promising anti-obesity agents, their anti-obesity properties involve a number of mechanisms, including suppression of lipid metabolism and absorption, impact on satiety, and prevention of adipocyte differentiation. Obesity is linked to type 2 diabetes, cardiovascular disease, and other metabolic syndromes. In this review various bioactive polysaccharides like chitin, chitosan, fucosylated chondroitin sulphate, chitooligosaccharides and glycosaminoglycans have been discussed for their anti-obesity effects through various pathways. Critical evaluation of observational studies and intervention trials on obesity, lipid hypertrophy, dyslipidemia, and type 2 diabetes was done with a primary focus on specific marine fauna polysaccharide as a source of seafood that is consumed all over the world. It has been observed that consumption of individual seafood constituents was effective in reducing obesity. Thus, marine derived novel bioactive polysaccharides have potential applications in food and pharmaceutical industries.

Modulatory effect of interleukin-2 loaded chitosan nano sphere on regulatory T cell activity in streptozotocin-induced diabetic mice

OBJECTIVE

The current study aimed to assess the modulating effect of IL-2 encapsulated chitosan-nanoparticles (CSNPs) on the function of Treg cells through induction of type 1 diabetes (T1D). Treg cell function was monitored by the forkhead box P3 (FoxP3) and transforming growth factor beta (TGFβ) levels, correlating them with blood glucose and serum insulin levels.

MATERIALS AND METHODS

In this case-control study, a low dose of IL-2 (free and chitosan-loaded) was injected into a diabetic mice group. The levels of FoxP3 and TGF-β 1 were assessed using Enzyme-Linked Immunosorbent Assay. In addition, blood glucose and serum insulin levels were determined.

RESULTS

The mean glucose level decreased significantly after free rIL-2 or rIL-2 / CSNPs treatment. Meanwhile, the mean serum insulin level was significantly increased after treatment with free rIL-2 or rIL-2/CSNPs. The mean levels of FoxP3 and TGFβ 1 were significantly increased with either free rIL-2 or rIL-2/CSNPs compared to the T1D untreated group (P < 0.001). In the treated mice group receiving free CSNPs, there was a significant negative correlation between glucose and insulin levels. Moreover, FoxP3 & TGFβ 1 levels had a significant positive correlation. In treated mice groups with free rIL-2 and IL-2 CSNPs, there was a significant positive correlation between FoxP3 and glucose levels. A significant negative correlation was found after conducting a correlation between insulin level and FoxP3 in the T1D/ rIL-2 / CSNPs group.

CONCLUSIONS

Low-dose IL-2 selectively modulates FoxP3 + Tregs, and TGFβ 1 increases their levels. These results demonstrated that IL-2-free and chitosan-loaded nanoparticles can be therapeutic agents in T1D.

Use of Biomaterials in 3D Printing as a Solution to Microbial Infections in Arthroplasty and Osseous Reconstruction

The incidence of microbial infections in orthopedic prosthetic surgeries is a perennial problem that increases morbidity and mortality, representing one of the major complications of such medical interventions. The emergence of novel technologies, especially 3D printing, represents a promising avenue of development for reducing the risk of such eventualities. There are already a host of biomaterials, suitable for 3D printing, that are being tested for antimicrobial properties when they are coated with bioactive compounds, such as antibiotics, or combined with hydrogels with antimicrobial and antioxidant properties, such as chitosan and metal nanoparticles, among others. The materials discussed in the context of this paper comprise beta-tricalcium phosphate (β-TCP), biphasic calcium phosphate (BCP), hydroxyapatite, lithium disilicate glass, polyetheretherketone (PEEK), poly(propylene fumarate) (PPF), poly(trimethylene carbonate) (PTMC), and zirconia. While the recent research results are promising, further development is required to address the increasing antibiotic resistance exhibited by several common pathogens, the potential for fungal infections, and the potential toxicity of some metal nanoparticles. Other solutions, like the incorporation of phytochemicals, should also be explored. Incorporating artificial intelligence (AI) in the development of certain orthopedic implants and the potential use of AI against bacterial infections might represent viable solutions to these problems. Finally, there are some legal considerations associated with the use of biomaterials and the widespread use of 3D printing, which must be taken into account.

Advances in chitosan and chitosan derivatives for biomedical applications in tissue engineering: An updated review

In recent years, chitosan (CS) has received much attention as a functional biopolymer for various applications, especially in the biomedical field. It is a natural polysaccharide created by the chemical deacetylation of chitin (CT) that is nontoxic, biocompatible, and biodegradable. This natural polymer is difficult to process; however, chemical modification of the CS backbone allows improved use of functional derivatives. CS and its derivatives are used to prepare hydrogels, membranes, scaffolds, fibers, foams, and sponges, primarily for regenerative medicine. Tissue engineering (TE), currently one of the fastest-growing fields in the life sciences, primarily aims to restore or replace lost or damaged organs and tissues using supports that, combined with cells and biomolecules, generate new tissue. In this sense, the growing interest in the application of biomaterials based on CS and some of its derivatives is justifiable. This review aims to summarize the most important recent advances in developing biomaterials based on CS and its derivatives and to study their synthesis, characterization, and applications in the biomedical field, especially in the TE area.

A comprehensive review of advanced nasal delivery: Specially insulin and calcitonin

Peptide drugs through nasal mucous membrane, such as insulin and calcitonin have been widely used in the medical field. There are always two sides to a coin. One side, intranasal drug delivery can imitate the secretion pattern in human body, having advantages of physiological structure and convenient use. Another side, the low permeability of nasal mucosa, protease environment and clearance effect of nasal cilia hinder the intranasal absorption of peptide drugs. Researchers have taken multiple means to achieve faster therapeutic concentration, lower management dose, and fewer side effects for better nasal preparations. To improve the peptide drugs absorption, various strategies had been explored via the nasal mucosa route. In this paper, we reviewed the achievements of 18 peptide drugs in the past decade about the perspectives of the efficacy, mechanism of enhancing intranasal absorption and safety. The most studies were insulin and calcitonin. As a result, absorption enhancers, nanoparticles (NPs) and bio-adhesive system are the most widely used. Among them, chitosan (CS), cell penetrating peptides (CPPs), tight junction modulators (TJMs), soft NPs and gel/hydrogel are the most promising strategies. Moreover, two or three strategies can be combined to prepare drug vectors. In addition, spray freeze dried (SFD), self-emulsifying nano-system (SEN), and intelligent glucose reaction drug delivery system are new research directions in the future.

Chitosan coated graphene oxide incorporated sodium alginate hydrogel beads for the controlled release of amoxicillin

Biopolymers are crucial in pharmaceuticals, particularly for controlled drug release. In this study, we loaded the broad-spectrum antibacterial drug amoxicillin into sodium alginate, a well-known biopolymer. Graphene oxide was incorporated into the composite, and the hydrogel beads were coated with chitosan for its mucoadhesive properties. Various composites were formulated by adjusting the weight percentage of graphene oxide (GO). The fabricated beads demonstrated controlled and sustained drug release, with 98 % of the loaded drug molecules released over 24 h at gastric pH. The antibacterial test using the disc diffusion technique confirmed the drug release, exhibiting greater effectiveness against the gram-positive bacterium S. aureus than the gram-negative bacterium E. coli. The drug release data were optimized using zero order, first order, Higuchi, and Korsmeyer-Peppas models. The experimental data were best fit to the Korsmeyer-Peppas model with a relatively higher correlation coefficient value. Biocompatibility was evaluated through a cell viability test using mouse fibroblast cell lines (L929). The MTT viability assay confirmed high levels of cytocompatibility, even at higher concentrations (100 μg/mL), with 98.15 % viable cells. These results highlight the potential of the fabricated beads as an effective amoxicillin drug delivery system with biomedical applications.

Exploring the diverse applications of Carbohydrate macromolecules in food, pharmaceutical, and environmental technologies

Carbohydrates are a class of macromolecules that has significant potential across several domains, including the organisation of genetic material, provision of structural support, and facilitation of defence mechanisms against invasion. Their molecular diversity enables a vast array of essential functions, such as energy storage, immunological signalling, and the modification of food texture and consistency. Due to their rheological characteristics, solubility, sweetness, hygroscopicity, ability to prevent crystallization, flavour encapsulation, and coating capabilities, carbohydrates are useful in food products. Carbohydrates hold potential for the future of therapeutic development due to their important role in sustained drug release, drug targeting, immune antigens, and adjuvants. Bio-based packaging provides an emerging phase of materials that offer biodegradability and biocompatibility, serving as a substitute for traditional non-biodegradable polymers used as coatings on paper. Blending polyhydroxyalkanoates (PHA) with carbohydrate biopolymers, such as starch, cellulose, polylactic acid, etc., reduces the undesirable qualities of PHA, such as crystallinity and brittleness, and enhances the PHA's properties in addition to minimizing manufacturing costs. Carbohydrate-based biopolymeric nanoparticles are a viable and cost-effective way to boost agricultural yields, which is crucial for the increasing global population. The use of biopolymeric nanoparticles derived from carbohydrates is a potential and economically viable approach to enhance the quality and quantity of agricultural harvests, which is of utmost importance given the developing global population. The carbohydrate biopolymers may play in plant protection against pathogenic fungi by inhibiting spore germination and mycelial growth, may act as effective elicitors inducing the plant immune system to cope with pathogens. Furthermore, they can be utilised as carriers in controlled-release formulations of agrochemicals or other active ingredients, offering an alternative approach to conventional fungicides. It is expected that this review provides an extensive summary of the application of carbohydrates in the realms of food, pharmaceuticals, and environment.

Kinetics, Equilibrium, and Thermodynamics for Conjugation of Chitosan with Insulin-Mimetic [meso-Tetrakis(4-sulfonatophenyl)porphyrinato]oxovanadate(IV)(4-) in an Aqueous Solution

This study investigated the conjugation of chitosan with the insulin-mimetic [meso-tetrakis(4-sulfonatophenyl)porphyrinato]oxovanadate(IV)(4-), VO(tpps), in an aqueous medium as a function of conjugation time, VO(tpps) concentrations, and temperatures. To validate the synthesis of chitosan-VO(tpps) conjugate, UV-visible and Fourier transform infrared spectrophotometric techniques were utilized. Conjugate formation is ascribed to the electrostatic interaction between the NH3+ units of chitosan and the SO3- units of VO(tpps). Chitosan enhances the stability of VO(tpps) in an aqueous medium (pH 2.5). VO(tpps) conjugation with chitosan was best explained by pseudo-second-order kinetic and Langmuir isotherm models based on kinetic and isotherm studies. The Langmuir equation determined that the maximal ability of VO(tpps) conjugated with each gram of chitosan was 39.22 μmol at a solution temperature of 45 °C. Activation energy and thermodynamic studies (Ea: 8.78 kJ/mol, ΔG: -24.52 to -27.55 kJ/mol, ΔS: 204.22 J/(mol K), and ΔH: 37.30 kJ/mol) reveal that conjugation is endothermic and physical in nature. The discharge of VO(tpps) from conjugate was analyzed in freshly prepared 0.1 mol/L phosphate buffer (pH 7.4) at 37 °C. The release of VO(tpps) from the conjugate is a two-phase process best explained by the Higuchi model, according to a kinetic analysis of the release data. Taking into consideration all experimental findings, it is proposed that chitosan can be used to formulate both solid and liquid insulin-mimetic chitosan-VO(tpps) conjugates.

Anti-Obesity Effects of Chitosan and Its Derivatives

The number of obese people in the world is rising, leading to an increase in the prevalence of type 2 diabetes and other metabolic disorders. The search for medications including natural compounds for the prevention of obesity is an urgent task. Chitosan polysaccharide obtained through the deacetylation of chitin, and its derivatives, including short-chain oligosaccharides (COS), have hypolipidemic, anti-inflammatory, anti-diabetic, and antioxidant properties. Chemical modifications of chitosan can produce derivatives with increased solubility under neutral conditions, making them potential therapeutic substances for use in the treatment of metabolic disorders. Multiple studies both in animals and clinical trials have demonstrated that chitosan improves the gut microbiota, restores intestinal barrier dysfunction, and regulates thermogenesis and lipid metabolism. However, the effect of chitosan is rather mild, especially if used for a short periods, and is mostly independent of chitosan's physical characteristics. We hypothesized that the major mechanism of chitosan's anti-obesity effect is its flocculant properties, enabling it to collect the chyme in the gastrointestinal tract and facilitating the removal of extra food. This review summarizes the results of the use of COS, chitosan, and its derivatives in obesity control in terms of pathways of action and structural activity.

Glucose-Responsive Microgel Comprising Conventional Insulin and Curcumin-Laden Nanoparticles: a Potential Combination for Diabetes Management

Successful management of type 2 diabetes mellitus (T2DM), a complex and chronic disease, requires a combination of anti-hyperglycemic and anti-inflammatory agents. Here, we have conceptualized and tested an integrated "closed-loop mimic" in the form of a glucose-responsive microgel (GRM) based on chitosan, comprising conventional insulin (INS) and curcumin-laden nanoparticles (nCUR) as a potential strategy for effective management of the disease. In addition to mimicking the normal, on-demand INS secretion, such delivery systems display an uninterrupted release of nCUR to combat the inflammation, oxidative stress, lipid metabolic abnormality, and endothelial dysfunction components of T2DM. Additives such as gum arabic (GA) led to a fivefold increased INS loading capacity compared to GRM without GA. The GRMs showed excellent in vitro on-demand INS release, while a constant nCUR release is observed irrespective of glucose concentrations. Thus, this study demonstrates a promising drug delivery technology that can simultaneously, and at physiological/pathophysiological relevance, deliver two drugs of distinct physicochemical attributes in the same formulation.

Self-assembled chitosan-insulin oral nanoparticles - A critical perspective review

Chitosan is an abundant natural cationic polysaccharide with excellent biodegradability, bioadhesion, and biocompatibility. Chitosan is extensively researched for various particulate oral insulin drug delivery systems. Oral insulin is economically efficient and more convenient than injections, with greater patient compliance. Electrostatic ionic interaction between cationic chitosan and anionic polymer or insulin leads to the formation of spontaneously self-assembled nanoparticles. This simple technique attracted many researchers as it can be carried out quickly in mild conditions without harmful solvents, such as surfactants or chemical cross-linkers that might degrade the insulin structure. The formulated chitosan nanoparticles help to protect the core insulin from enzymatic degradation in the digestive system and improve paracellular intestinal uptake from the enterocytes due to mucoadhesion and reversible tight junction opening. Moreover, functionalized chitosan nanoparticles create newer avenues for targeted and prolonged delivery. This review focuses on modified chitosan-insulin nanoparticles and their implications on oral insulin delivery. Dependent variables and their optimal concentration ranges used in self-assembly techniques for chitosan-insulin nanoparticular synthesis are summarized. This review provides a comprehensive guide to fine-tune the essential factors to formulate stable insulin-chitosan nanoparticles using mild ionic interactions.

Expression Improvement of Recombinant Plasmids of the Interleukin-7 Gene in Chitosan-Derived Nanoparticles and Their Elevation of Mice Immunity

To investigate a safe and effective approach for enhancing the in vivo expression of recombinant genes and improving the systemic immunity of animals against infectious diseases, we employed the interleukin-7 (IL-7) gene from Tibetan pigs to construct a recombinant eukaryotic plasmid (VRTPIL-7). We first examined VRTPIL-7's bioactivity on porcine lymphocytes in vitro and then encapsulated it with polyethylenimine (PEI), chitosan copolymer (CS), PEG-modified galactosylated chitosan (CS-PEG-GAL) and methoxy poly (ethylene glycol) (PEG) and PEI-modified CS (CS-PEG-PEI) nanoparticles using the ionotropic gelation technique. Next, we intramuscularly or intraperitoneally injected mice with various nanoparticles containing VRTPIL-7 to evaluate their immunoregulatory effects in vivo. We observed a significant increase in neutralizing antibodies and specific IgG levels in response to the rabies vaccine in the treated mice compared to the controls. Treated mice also exhibited increased leukocytes, CD8+ and CD4+ T lymphocytes, and elevated mRNA levels of toll-like receptors (TLR1/4/6/9), IL-1, IL-2, IL-4, IL-6, IL-7, IL-23, and transforming growth factor-beta (TGF-β). Notably, the recombinant IL-7 gene encapsulated in CS-PEG-PEI induced the highest levels of immunoglobulins, CD4+ and CD8+ T cells, TLRs, and cytokines in the mice's blood, suggesting that chitosan-PEG-PEI may be a promising carrier for in vivo IL-7 gene expression and enhanced innate and adaptive immunity for the prevention of animal diseases.

Greater efficiency of polyherbal drug encapsulated biosynthesized chitosan nano-biopolymer on diabetes and its complications

Diabetes is a highly complex disease that has an adverse impact on the lives of individuals, and the current medicines used to manage diabetes have obvious side effects. Medicinal plants, on the other hand, may serve as an alternate source of anti-diabetic drugs. A polyherbal combination has a higher and more extensive therapeutic potential than a single herb. Yet, due to deterioration during the absorption process, the usage of this drug still yields inadequate results. Encapsulation of polyherbal drug with chitosan nanoparticles is one of the key ways to solve this problem due to its biocombatibilty, slow and targeted drug delivery characteristics. In the present study, the chitosan was derived from prawn shell and the chitosan nanoparticles had been prepared by ionic-gelation method. The anti-diabetic polyherbal drug (Andrographis paniculata, Andrographis alata, Adhatoda zeylanica, Gymnema sylvestre, Syzygium cumini, and Justicia glabra) was encapsulated with a bio-derived chitosan biopolymer. The drug loading efficiency was about 85 %. The chemical and physical properties of the chitosan and drug-loaded chitosan nanoparticles had been analyzed by FT-IR absorption, XRD, SEM, TEM and EDAX analysis. The antidiabetic efficiency, hepatoprotective activity and antihyperlipedimic activity of the chitosan nanoparticles, polyherbal drug and polyherbal drug encapsulated with chitosan nanoparticles were assessed in a group of rats. The polyherbal drug reduced the serum glucose level from 306.4 mg/dL to 134.47 mg/dL, while the polyherbal drug encapsulated with chitosan nanoparticles reduced to 127.017 mg/dL. This was very close to the serum glucose level of non-diabetic rat (124.65 mg/dL). Further, it considerably increased the insulin level close to that of non-diabetic rat. Thus, the polyherbal drug encapsulated with chitosan nanoparticles showed superior efficiency in antidiabetic and also diabetic complications.

Chitosan oligosaccharide alleviates and removes the toxicological effects of organophosphorus pesticide chlorpyrifos residues

The abuse of chlorpyrifos (CHP), a commonly used organophosphorus pesticide, has caused many environmental pollution problems, especially its toxicological effects on non-target organisms. First, CHP enriched on the surface of plants enters ecosystem circulation along the food chain. Second, direct inflow of CHP into the water environment under the action of rainwater runoff inevitably causes toxicity to non-target organisms. Therefore, we used rats as a model to establish a CHP exposure toxicity model and studied the effects of CHP in rats. In addition, to alleviate and remove the injuries caused by residual chlorpyrifos in vivo, we explored the alleviation effect of chitosan oligosaccharide (COS) on CHP toxicity in rats by exploiting its high water solubility and natural biological activity. The results showed that CHP can induce the toxicological effects of intestinal antioxidant changes, inflammation, apoptosis, intestinal barrier damage, and metabolic dysfunction in rats, and COS has excellent removal and mitigation effects on the toxic damage caused by residual CHP in the environment. In summary, COS showed significant biological effects in removing and mitigating blood biochemistry, antioxidants, inflammation, apoptosis, gut barrier structure, and metabolic function changes induced by residual CHP in the environment.

Development of active and biodegradable film of ternary-based for food application

The effectiveness of plastic packaging in protecting food is quite appreciable, but its non-biodegradable characteristic raises concerns about environmental impacts. This has drawn attention to the development of alternative materials for food packaging from bio-based polymers. Chitosan, a polysaccharide with biodegradable, biocompatible, and non-toxic properties, is widely used in the formulation of food films. The objective of this work was to create a biodegradable and sustainable chitosan-based film whose active and intelligent action is obtained from red cabbage anthocyanins and the addition of propolis. The edible film’s thickness and total polyphenol content were 61.0 ±0.1μm and 20.08 ±0.5 mgAG g-1, respectively. The content of phenolic compounds and the biodegradation showed significant results (p <0.05), besides the good thermal stability to 200 °C and transparency. The proposed formulation developed an edible, biodegradable, and active (antioxidant) film with interesting heat-sealing resistance, moisture barrier and gas transfer, which contributes to increasing food shelf life.

Antidiabetic Properties of Chitosan and Its Derivatives

Diabetes mellitus is a chronic metabolic disorder. In addition to taking medication, adjusting the composition of the diet is also considered one of the effective methods to control the levels of blood glucose. Chitosan and its derivatives are natural and versatile biomaterials with health benefits. Chitosan has the potential to alleviate diabetic hyperglycemia by reducing hepatic gluconeogenesis and increasing skeletal muscle glucose uptake and utility. Scientists also focus on the glucose-lowering effect of chitosan oligosaccharide (COS). COS supplementation has the potential to alleviate abnormal glucose metabolism in diabetic rats by inhibiting gluconeogenesis and lipid peroxidation in the liver. Both high and low molecular weight chitosan feeding reduced insulin resistance by inhibiting lipid accumulation in the liver and adipose tissue and ameliorating chronic inflammation in diabetic rats. COS can reduce insulin resistance but has less ability to reduce hepatic lipids in diabetic rats. A clinical trial showed that a 3-month administration of chitosan increased insulin sensitivity and decreased body weight and triglycerides in obese patients. Chitosan and COS are considered Generally Recognized as Safe; however, they are still considered to be of safety concerns. This review highlights recent advances of chitosan and its derivatives in the glucose-lowering/antidiabetic effects and the safety.

Chitosan Nanogel with Mixed Food Plants and Its Relation to Blood Glucose in Type 2 Diabetes: A Systematic and Meta-Analysis Review of Observational Studies

This systematic review with metanalysis evaluated and analyzed the beneficial effects of certain plants food in type 2 diabetes (T2D) when consumed alone or in combination with chitosan. The main objective of the paper was to examine the relation of chitosan nanogel and mixed food plant (MFP) to control T2D. The databases included Medline, Scopus, PubMed, as well as Cochrane available between the month of January 1990 to January 2021. The eligibility criteria for selecting studies were case-controlled studies that included unripe plantain, bitter yam, okra, and chitosan either used-alone or in combination with non-specified food plants (NSFP). Two-fold autonomous critics retrieved the information required and evaluated the risk of bias of involved studies. Random-effect meta-analyses on blood glucose controls, were performed. Results of 18 studies included: seven that examined unripe plantains, one bitter yam, two okras, and eight chitosan, found regarding the decrease in blood glucose level. Meta-analysis of the results found a large proportion of I² values for all studies (98%), meaning heterogeneity. As a consequence, the combined effect sizes were not useful. Instead, prediction interval (PI) was used (mean difference 4.4 mg/dL, 95% PI -6.65 to 15.50 and mean difference 3.4 mg/dL, 95% PI -23.65 to 30.50) rather than the estimate of its confidence interval (CI). These studies were at 50% high risk of bias and 50% low risk of bias and there was judged to be an unclear risk of bias due to the insufficient information from the included study protocol (moderately low). The intervention lasted between three and 84 days, indicating potency and effectiveness of the intervention at both short and long durations. Due to the moderately low quality of the studies, the findings were cautiously interpreted. In conclusion, the current evidence available from the study does support the relation of chitosan with mixed unripe plantain, bitter yam and okra for the management of T2D. Further high-quality case-controlled animal studies are required to substantiate if indeed chitosan nanogel should be cross-linked with the specified food plant (SFP) for the management T2D.

Biopolymeric nanocarrier: an auspicious system for oral delivery of insulin

Subcutaneous administration of insulin has been practiced for the clinical supervision of diabetes pathogenesis but it is often ineffective to imitate the glucose homeostasis and is always invasive. Therefore, it causes patient discomfort and infection of local tissue. These issues lead to finding an alternative route for insulin delivery that could be effective, promising, and non-invasive. However, delivery of insulin orally is the most suitable route but the rapid breakdown of insulin by the gastrointestinal enzymes becomes a major barrier to this method. Therefore, nanocarriers (which guard insulin against degradation and facilitate its uptake) are preferred for oral insulin delivery. Among various categories of nanocarriers, bio-polymeric nanocarriers draw special attention owing to their hydrophilic, non-toxic, and biodegradable nature. This review provides a detailed overview of insulin-loaded biopolymer-based nanocarriers, which give future direction in the optimization and development of a clinically functional formulation for their effective and safe delivery.

Chitosan-based nanoscale systems for doxorubicin delivery: Exploring biomedical application in cancer therapy

Green chemistry has been a growing multidisciplinary field in recent years showing great promise in biomedical applications, especially for cancer therapy. Chitosan (CS) is an abundant biopolymer derived from chitin and is present in insects and fungi. This polysaccharide has favorable characteristics, including biocompatibility, biodegradability, and ease of modification by enzymes and chemicals. CS-based nanoparticles (CS-NPs) have shown potential in the treatment of cancer and other diseases, affording targeted delivery and overcoming drug resistance. The current review emphasizes on the application of CS-NPs for the delivery of a chemotherapeutic agent, doxorubicin (DOX), in cancer therapy as they promote internalization of DOX in cancer cells and prevent the activity of P-glycoprotein (P-gp) to reverse drug resistance. These nanoarchitectures can provide co-delivery of DOX with antitumor agents such as curcumin and cisplatin to induce synergistic cancer therapy. Furthermore, co-loading of DOX with siRNA, shRNA, and miRNA can suppress tumor progression and provide chemosensitivity. Various nanostructures, including lipid-, carbon-, polymeric- and metal-based nanoparticles, are modifiable with CS for DOX delivery, while functionalization of CS-NPs with ligands such as hyaluronic acid promotes selectivity toward tumor cells and prevents DOX resistance. The CS-NPs demonstrate high encapsulation efficiency and due to protonation of amine groups of CS, pH-sensitive release of DOX can occur. Furthermore, redox- and light-responsive CS-NPs have been prepared for DOX delivery in cancer treatment. Leveraging these characteristics and in view of the biocompatibility of CS-NPs, we expect to soon see significant progress towards clinical translation.

Amoxicillin encapsulated in the N-2-hydroxypropyl trimethyl ammonium chloride chitosan and N,O-carboxymethyl chitosan nanoparticles: Preparation, characterization, and antibacterial activity

This is a report on the encapsulation amoxicillin (AMX) in the N-2-Hydroxypropyl trimethyl ammonium chloride chitosan (N-2-HACC) and N,O-carboxymethyl chitosan (CMCS) nanoparticles (NPs) for biomedical applications. The N-2-HACC/CMCS NPs have broad-spectrum antibacterial properties. In order to achieve sustained and slow drug release, improve drug transport efficiency and bioavailability, prolong drug residence time, and reduce pollution, we synthesized highly efficient, easily absorbed and rapidly degradable nano-formulation veterinary antibiotics in this study. The N-2-HACC/CMCS NPs were used for the encapsulation of AMX, and the cytocompatibility, in vitro release, in vivo drug release kinetics and antimicrobial activity of N-2-HACC/CMCS/AMX NPs were investigated. The NPs displayed a round shape and smooth surface, and the NPs allowed the sustained release of AMX at a much slower rate than that of non-coated AMX. The NPs exhibited excellent cytocompatibility and the antimicrobial activity against Escherichia coli, Acinetobacter baumannii, Streptococcus pneumoniae and Staphylococcus aureus. Moreover, the NPs could store at 4 °C, -20 °C and 25 ± 5 °C for 30 d. These results suggested that the N-2-HACC/CMCS NPs could be availed as a candidate for drug delivery carrier to achieve sustained and slow release, improve bioavailability, prolong residence time at the target site, and reduce the dosage of drug.

Natural Polysaccharide-Based Nanodrug Delivery Systems for Treatment of Diabetes

In recent years, natural polysaccharides have been considered as the ideal candidates for novel drug delivery systems because of their good biocompatibility, biodegradation, low immunogenicity, renewable source and easy modification. These natural polymers are widely used in the designing of nanocarriers, which possess wide applications in therapeutics, diagnostics, delivery and protection of bioactive compounds or drugs. A great deal of studies could be focused on developing polysaccharide nanoparticles and promoting their application in various fields, especially in biomedicine. In this review, a variety of polysaccharide-based nanocarriers were introduced, including nanoliposomes, nanoparticles, nanomicelles, nanoemulsions and nanohydrogels, focusing on the latest research progress of these nanocarriers in the treatment of diabetes and the possible strategies for further study of polysaccharide nanocarriers.

Development of Fermented Shrimp Shell Product with Hypoglycemic and Hypolipidemic Effects on Diabetic Rats

In 2020, approximately 9.3 billion tons of crustaceans were consumed, and 45–48% of shrimp shell (SS) by-products were discarded as waste. In this study, the SS of Litopenaeus vannamei was fermented by Lactobacillus plantarum LV33204, Stenotrophomonas maltophilia LV2122 (strong proteolytic activity), and Aeromonas dhakensis LV1111 (chitin-degrading activity), and the optimal fermentation conditions of liquid-fermented SS was established. Contents of total peptide, astaxanthin, and total phenolic content of the fermented SS were significantly higher than that of unfermented SS. In the presence of fermented SS, glucose uptake and insulin resistance of TNF-α-stimulated FL83B hepatocytes were markedly improved. Furthermore, daily oral supplement of fermented SS to streptozotocin (STZ)/nicotinamide (NA)-induced diabetic rats for 7 weeks significantly reduced plasma glucose and insulin resistance. Meanwhile, ingestion of fermented SS might enhance hepatic catabolism of glucose by increasing hexokinase and glucose-6-phosphate dehydrogenase activity and decreasing glucose-6-phosphatase activity. In addition, the fermented SS downregulated plasma total cholesterol (TG), triglycerides (TCs), low-density lipoprotein cholesterol (LDL-C), liver TG, and TC and lipid peroxidation levels in diabetic rats. In conclusion, a biorefinery process for waste SS was established through mixed strain fermentation. The in vitro and in vivo data reveal that the fermented SS is a promising functional food for the management of diabetic hyperglycemia and hyperlipidemia.

Biodegradable Nanoparticles Prepared from Chitosan and Casein for Delivery of Bioactive Polysaccharides

Ophiopogon japonicus polysaccharides (OJPs) have great anti-inflammation and immunomodulatory abilities. However, the low bioavailability of OJPs reduces its applicability in the biomedical and pharmaceutical fields. Chitosan (CS) has excellent mucoadhesive properties and absorption-enhancing ability in oral administration. Casein hydrolysate (CL) has good interfacial diffusivity and emulsifying ability, and can interact with polysaccharides to form complexes combining the individual properties of both. Therefore, chitosan and casein hydrolysate are good candidates for developing nanoformulations for oral delivery. In this study, bioactive polysaccharides (OJPs), CS and CL, were combined to prepare CS/OJPs/CL co-assembled biodegradable nanoparticles. The interactions between polysaccharides (CS and OJPs) and peptide (CL) resulted in the formation of nanoparticles with an average particle size of 198 nm and high OJPs loading efficiency. The colloidal properties of the nanoparticles were pH-dependent, which were changed significantly in simulated digestive fluid at different pH values. OJPs released from the CS/OJPs/CL nanoparticles were greatly affected by pH and enzymatic degradation (trypsin and lysozyme). The nanoparticles were easily internalized by macrophages, thereby enhancing the OJPs’ inhibitory ability against Ni²⁺-induced cytotoxicity and LPS-induced nitric oxide production. This study demonstrates that prepared polysaccharide/protein co-assembled nanoparticles can be potential nanocarriers for the oral delivery of bioactive polysaccharides with anti-inflammatory functions.

Synthesis of vildagliptin loaded acrylamide-g-psyllium/alginate-based core-shell nanoparticles for diabetes treatment

Diabetes mellitus has become a major public health concern all over the world. Vildagliptin is one of the antidiabeticdrug that can overcome the existing problem of this prevalent disease. Present study aims to synthesize and investigate the role of vildagliptin-loaded core-shell nanoparticle of grafted psyllium and alginate (VG@P/A-NPs) in anti-diabetes application. FTIR, SEM, XRD, ¹³CNMR and zeta analyzer were used for characterization of the core-shell nanoparticles (VG@P/A-NPs). The synthesized acrylamide-grafted-psyllium was also optimized through varying grafting parameters such as acrylamide and ceric ammonium nitrate (CAN) concentration, time and temperature to obtain the maximum yield of acrylamide-grafted-psyllium. Rheological analysis of pure psyllium, grafted psyllium and alginate were also performed. For biological studies, the first cytotoxicity of grafted psyllium and VG@P/A-NPs were examined on human lung adenocarcinoma cell line A549 in which it was observed that VG@P/A-NPs did not exhibited any toxicity. The antidiabetic potential of VG@P/A-NPs was investigated by glucose uptake assay, using TNF-α induced insulin resistance skeletal cell model using mouse muscle L6 cell line. The insulin signaling impaired cell line displayed a highly significant (p < 0.0001) dose-dependent increase in glucose uptake after treatment with increasing doses of VG@P/A-NPs.The drug release behavior of VG@P/A-NPs was examined at various pH and the highest drug release (98 %) was obtained at pH (7.4). The drug release kinetic data was following the Higuchi (R² = 0.9848) kinetic model, suggesting the release of drug from vildagliptin-loaded grafted psyllium-alginate core-shell nanoparticles (VG@P/A-NPs) as a square root of time-dependent process and diffusion controlled. This study provides an economical and environment-friendly approach towards the synthesis of VG@P/A-NPs with antidiabetes applications.

Boosting physical-mechanical properties of adipic acid/chitosan films by DMTMM cross-linking

In this paper we present a novel strategy to easily prepare biodegradable chitosan derived films as new packaging systems. Combination of chitosan, adipic acid and 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methyl-morpholinium chloride (DMTMM) allowed to obtain high-performing cross-linked films. Biobased glycerol was employed as plasticizer. An in-depth study was performed on ten different samples in order to evaluate the role of DMTMM as cross-linking agent. Experimental data showed that 15 wt% of DMTMM enhanced moisture content and moisture uptake (10.42% and 11.11%), water vapor permeability (0.13 10^-7 g m^-1 h^-1 Pa^-1) and good UV barrier properties. Additionally, 30 wt% of DMTMM significantly increased the tensile strength of films up to 83 MPa and elongation at break values reached 39.7%. Thermogravimetric, IR, XRD and SEM analysis confirmed that physical-mechanical properties of the obtained films were considerably improved, due to cross-linking by DMTMM, demonstrating promising properties for packaging applications.

An overview of oral insulin delivery strategies (OIDS)

Despite tremendous efforts, the world continues its fight against the common chronic disease-diabetes. Diabetes is caused by elevated glucose levels in the blood, which can lead to several complications like glaucoma, cataract, kidney failure, diabetic ketoacidosis, heart attack, and stroke. According to recent statistics, China, India, and the US rank at the top three positions with regards to the number of patients affected by diabetes. Ever since its discovery, insulin is one of the major therapeutic molecules that is used to control the disease in the diabetic population, worldwide. The most common route of insulin administration has been the subcutaneous route. However, the limitations associated with this route have motivated global efforts to explore alternative strategies to deliver insulin, including pulmonary, transdermal, nasal, rectal, buccal, and oral routes. Oral insulin delivery is the most convenient and patient-centered route. However, the oral route is also associated with numerous drawbacks that present significant challenges to the scientific fraternity. The human physiological system acts as a formidable barrier to insulin, limiting its bioavailability. The present review covers the major barriers against oral insulin delivery and explains formulation strategies that have been adopted to overcome these barriers. The review focuses on oral insulin delivery strategies (OIDS) for increasing the bioavailability of oral insulin, including nanoparticles, microparticles, nano-in-microparticles, hydrogels, tablets, capsules, intestinal patches, and use of ionic liquids. It also highlights some of the notable recent advancements and clinical trials in oral insulin delivery. This formulation based OIDS may significantly improve patient compliance in the treatment of diabetes.

Synthesis of an insulin intercalated graphene oxide nanogel composite: evaluation of its release profile and stability for oral delivery of insulin

Diabetes mellitus (DM) is a disorder of glucose regulation produced due to insufficient availability of insulin. Generally, insulin is given to diabetes patients via subcutaneous injection which is a painful method to deliver this drug. In this work we have made an attempt to develop an oral drug delivery system that can efficiently deliver insulin to the small intestine. An insulin intercalated GO based nanogel composite (In@GO NgC) was fabricated for oral delivery of insulin. The in vitro release of insulin from In@GO NgC was studied in artificial gastric (pH 1.2) and intestinal (pH 7.5) fluids. The In@GO NgC produced better release in artificial intestinal fluid as compared to gastric fluid. The enzymatic degradation of released insulin was also examined and the results revealed that even after 6 h of incubation, the gel remained stable and the un-degraded insulin seemed to be sufficient for the physiological processes. The efficacy of In@GO NgC was also confirmed by comparing its release profile with non-intercalated GO NgC and nanogel (Ng) without GO. The prepared nanogels were thoroughly characterized using FTIR, SEM, EDS, DSC and DLS. The better release profile and enzymatic stability of In@GO NgC suggests that it can be utilized for oral drug delivery of insulin.

Influence of Amidation on the Release Profiles of Insulin Drug from Chitosan-Based Matrices

The present study deals with the comparative analysis of insulin drug release from pure chitosan (CS) and its crosslinked amide derivatives. The objective of this study was to investigate the influence of fatty acid derivatives on the release profiles of insulin drug from CS-based matrices. In order to form cross-linked CS-based amide derivatives, the CS biopolymer was reacted with four different fatty acids with varying amount of unsaturation, including stearic acid (SA), oleic acid (OA), linoleic acid (LA), and linolenic acid (LLA), and then subjected to cross-linking. Following this, the pure CS and cross-linked CS amide derivatives were loaded with insulin drug and were characterized thoroughly by making use of various instrumental techniques such as FTIR, UV–Vis, TGA, HRTEM, DLS, PDI, and zeta potential studies. In addition, the insulin release profiles were studied and compared between pure CS and CS amides at two different pHs, 7.4 and 1.2. Finally, the insulin drug release data was investigated with five different pharmacokinetic models (zero, first, Higuchi, Kersmeyer–Peppas, and Hixson models). From the analysis, the cross-linked CS amides was found to be superior to pure CS, and within the amide derivatives, the one with a high amount of unsaturation, LLA-derived CS biopolymer, was shown to be better for the release of insulin drug by means of the diffusion and dissolution pathways.

Applications of Chitosan-Alginate-Based Nanoparticles-An Up-to-Date Review

Chitosan and alginate are two of the most studied natural polymers that have attracted interest for multiple uses in their nano form. The biomedical field is one of the domains benefiting the most from the development of nanotechnology, as increasing research interest has been oriented to developing chitosan-alginate biocompatible delivery vehicles, antimicrobial agents, and vaccine adjuvants. Moreover, these nanomaterials of natural origin have also become appealing for environmental protection (e.g., water treatment, environmental-friendly fertilizers, herbicides, and pesticides) and the food industry. In this respect, the present paper aims to discuss some of the newest applications of chitosan-alginate-based nanomaterials and serve as an inception point for further research in the field.

Efficient Treatment of Fish Intestinal Parasites Applying a Membrane-Penetrating Oral Drug Delivery Nanoparticle

Nanodelivery of drugs aims to ensure drug stability in the face of adverse biochemical conditions in the course of administration, concomitant with appropriate pharmacological action provided by delivery at the targeted site. In this study, the application potential of a nanoparticle produced with biopolymers chitosan-N-arginine and alginate as an oral drug delivery material is evaluated. Both macromolecules being weak polyelectrolytes, the nanoparticle presents strong thermodynamic interactions with a biological model membrane consisting of a charged lipid liposome bilayer, leading to membrane disruption and membrane penetration of the nanoparticles in ideal conditions of pH corresponding to the oral route. The powder form of the nanoparticle was obtained by lyophilization and with a high percentage of entrapment of the anthelmintic drug praziquantel. In vivo studies were conducted with oral administration to Corydoras schwartzi fish with high intensity of intestinal parasites infection. The in vivo experiments confirmed the mucoadhesive and revealed membrane-penetrating properties of the nanoparticle by translocating the parasite cyst, which provided target drug release and reduction of over 97% of the fish intestinal parasites. Thus, it was evidenced that the nanoparticle was effective in transporting and releasing the drug to the target, providing an efficient treatment.

Chitosan for biomedical applications, promising antidiabetic drug delivery system, and new diabetes mellitus treatment based on stem cell

Since chitosan's excellent pharmacokinetic and chemical properties, it is an attractive and promising carbohydrate biopolymer in biomedical applications. Chitosan's beneficial function in the defense and propagation of pancreatic β cells, reducing hyperglycemia, and avoiding diabetes mellitus associated with impaired lipid metabolism has been demonstrated in several studies. Additionally, chitosan has also been used in various nanocarriers to deliver various antidiabetic drugs to reduce glucose levels. Herein, the first to provide the currently available potential benefits of chitosan in diabetes mellitus treatment focuses on chitosan-based nanocarriers for oral administration of various antidiabetic drugs nasal and subcutaneous passages. Moreover, chitosan is used to activate and deliver stem cells and differentiate them into cells similar to pancreatic beta cells as a new type of treatment for type one diabetes mellitus. The results of this review will be helpful in the development of promising treatments and better control of diabetes mellitus.

Strategies for the delivery of antidiabetic drugs via intranasal route

Diabetes is a metabolic disorder defined by higher blood glucose levels in the body generally controlled by antidiabetic agents (oral) and insulin (subcutaneous). To avoid the limitations of the conventional routes such as lower bioavailability and pain at the site of injection in case of parenteral route modified delivery systems are proposed like transdermal, pulmonary and inhalation delivery and among the other delivery systems nasal drug delivery system that shows the advantages such as reduced frequency of dose, higher patient compliance, safety, ease of administration, prolonged residence time, improved absorption of drug in the body, higher bioavailability and stability. This review article discusses the strategies adopted for the delivery of antidiabetic drugs by the intranasal delivery system. The insulin and glucagon-like peptides on experimentation show results of improved therapeutic levels and patient compliance. The drugs are transported by the paracellular route and absorbed through the epithelial tight junctions successfully by utilising different strategies. The limitations of the nasal delivery such as irritation or burning on administration, degradation by the enzymes, mucociliary clearance, lesser volume of the nasal cavity and permeation through the nasal mucosa. To overcome the challenges different strategies for the nasal administration are studied such as polymers, particulate delivery systems, complexation with peptides and smart delivery using glucose-responsive systems. A vast scope of intranasal preparations exists for antidiabetic drugs in the future for the management of diabetes and more clinical studies are the requirement for the societal impact to battle against diabetes.

Chitosan: An Overview of Its Properties and Applications

Chitosan has garnered much interest due to its properties and possible applications. Every year the number of publications and patents based on this polymer increase. Chitosan exhibits poor solubility in neutral and basic media, limiting its use in such conditions. Another serious obstacle is directly related to its natural origin. Chitosan is not a single polymer with a defined structure but a family of molecules with differences in their composition, size, and monomer distribution. These properties have a fundamental effect on the biological and technological performance of the polymer. Moreover, some of the biological properties claimed are discrete. In this review, we discuss how chitosan chemistry can solve the problems related to its poor solubility and can boost the polymer properties. We focus on some of the main biological properties of chitosan and the relationship with the physicochemical properties of the polymer. Then, we review two polymer applications related to green processes: the use of chitosan in the green synthesis of metallic nanoparticles and its use as support for biocatalysts. Finally, we briefly describe how making use of the technological properties of chitosan makes it possible to develop a variety of systems for drug delivery.

Strategies to improve insulin delivery through oral route: A review

Diabetes mellitus is found to be among the most suffered and lethal diseases for mankind. Diabetes mellitus type-1 is caused by the demolition of pancreatic islets responsible for the secretion of insulin. Insulin is the peptide hormone (anabolic] that regulates the metabolism of carbohydrates, fats, and proteins. Upon the breakdown of the natural process of metabolism, the condition leads to hyperglycemia (increased blood glucose levels]. Hyperglycemia demands outsourcing of insulin. The subcutaneous route was found to be the most stable route of insulin administration but faces patient compliance problems. Oral Insulin delivery systems are the patient-centered and innovative novel drug delivery system, eliminating the pain caused by the subcutaneous route of administration. Insulin comes in contact across various barriers in the gastrointestinal tract, which has been discussed in detail in this review. The review describes about the different bioengineered formulations, including microcarriers, nanocarriers, Self-Microemulsifying drug delivery systems (SMEDDs), Self-Nanoemulsifying drug delivery systems (SNEDDs), polymeric micelles, cochleates, etc. Surface modification of the carriers is also possible by developing ligand anchored bioconjugates. A study on evaluation has shown that the carrier systems facilitate drug encapsulation without tampering the properties of insulin. Carrier-mediated transport by the use of natural, semi-synthetic, and synthetic polymers have shown efficient results in drug delivery by protecting insulin from harmful environment. This makes the formulation readily acceptable for a variety of populations. The present review focuses on the properties, barriers present in the GI tract, overcome the barriers, strategies to formulate oral insulin formulation by enhancing the stability and bioavailability of insulin.

Evaluation of bioactive release kinetics from crosslinked chitosan films with Aloe vera

Thermocompression was employed to prepare citric acid-crosslinked chitosan films with Aloe vera (AV) as bioactive compound. Films were easy to handle and mechanical properties did not change with the addition of AV up to 10 wt%, although both TS and EAB decreased for the films with 15 wt% AV, indicating that high AV contents would hinder intermolecular interactions among the formulation components. Maillard reaction occurred between chitosan and citric acid at the processing temperature used (115 °C), while physical interactions took place with AV, as shown by FTIR analysis. All films were insoluble but displayed hydration and limited swelling due to both physical and chemical interactions promoted by AV and citric acid, respectively. A slow AV release, governed by a Fickian diffusion controlled mechanism, and an increase of surface hydrophilicity, which favors cell adhesion, were observed.

Intestinal Population in Host with Metabolic Syndrome during Administration of Chitosan and Its Derivatives

Chitosan and its derivatives can alleviate metabolic syndrome by different regulation mechanisms, phosphorylation of AMPK (AMP-activated kinase) and Akt (also known as protein kinase B), suppression of PPAR-γ (peroxisome proliferator-activated receptor-γ) and SREBP-1c (sterol regulatory element–binding proteins), and translocation of GLUT4 (glucose transporter-4), and also the downregulation of fatty-acid-transport proteins, fatty-acid-binding proteins, fatty acid synthetase (FAS), acetyl-CoA carboxylase (acetyl coenzyme A carboxylase), and HMG-CoA reductase (hydroxy methylglutaryl coenzyme A reductase). The improved microbial profiles in the gastrointestinal tract were positively correlated with the improved glucose and lipid profiles in hosts with metabolic syndrome. Hence, this review will summarize the current literature illustrating positive correlations between the alleviated conditions in metabolic syndrome hosts and the normalized gut microbiota in hosts with metabolic syndrome after treatment with chitosan and its derivatives, implying that the possibility of chitosan and its derivatives to serve as therapeutic application will be consolidated. Chitosan has been shown to modulate cardiometabolic symptoms (e.g., lipid and glycemic levels, blood pressure) as well as gut microbiota. However, the literature that summarizes the relationship between such metabolic modulation of chitosan and prebiotic-like effects is limited. This review will discuss the connection among their structures, biological properties, and prebiotic effects for the treatment of metabolic syndrome. Our hope is that future researchers will consider the prebiotic effects as significant contributors to the mitigation of metabolic syndrome.

Chitosan modifies glycemic levels in people with metabolic syndrome and related disorders: meta-analysis with trial sequential analysis

BACKGROUND

Chitosan supplementation has been shown to modulate glycemic levels; however, studies have reported conflicting results. The present meta-analysis with trial sequential analysis was conducted to verify the overall influence of chitosan on glycemic levels in patients with metabolic syndrome.

METHODS

The PubMed, Cochrane library, and EMBASE databases were systematically searched for randomized controlled studies of chitosan intake and glycemic levels.

RESULTS

A total of ten clinical trials including 1473 subjects were included in this meta-analysis. Pooled effect sizes were determined by random-effects meta-analysis. Subgroup analysis was performed to analyze the sources of heterogeneity and their influence on the overall results. The results revealed a significant reduction in fasting glucose levels (SMD: - 0.39 mmol/L, 95% CI: - 0.62 to - 0.16) and hemoglobin A1c (HbA1c) levels (SMD: -1.10; 95% CI: - 2.15 to - 0.06) following chitosan supplementation but no effect on insulin levels (SMD: - 0.20 pmol/L, 95% CI: - 0.64 to 0.24). Subgroup analyses further demonstrated significant reductions in fasting glucose levels in subjects administered 1.6-3 g of chitosan per day and in studies longer than 13 weeks. Trial sequential analysis of the pooled results of the hypoglycemic effect demonstrated that the cumulative Z-curve crossed both the conventional boundary and trial sequential monitoring boundary for glucose and HbA1c.

CONCLUSIONS

The glucose level of patients who are diabetic and obese/overweight can be improved by supplementation with chitosan for at least 13 weeks at 1.6-3 g per day. Additional clinical research data are needed to confirm the role of chitosan, particularly in regulating glycosylated hemoglobin and insulin.

Alginate: From Food Industry to Biomedical Applications and Management of Metabolic Disorders

Initially used extensively as an additive and ingredient in the food industry, alginate has become an important compound for a wide range of industries and applications, such as the medical, pharmaceutical and cosmetics sectors. In the food industry, alginate has been used to coat fruits and vegetables, as a microbial and viral protection product, and as a gelling, thickening, stabilizing or emulsifying agent. Its biocompatibility, biodegradability, nontoxicity and the possibility of it being used in quantum satis doses prompted scientists to explore new properties for alginate usage. Thus, the use of alginate has been expanded so as to be directed towards the pharmaceutical and biomedical industries, where studies have shown that it can be used successfully as biomaterial for wound, hydrogel, and aerogel dressings, among others. Furthermore, the ability to encapsulate natural substances has led to the possibility of using alginate as a drug coating and drug delivery agent, including the encapsulation of probiotics. This is important considering the fact that, until recently, encapsulation and coating agents used in the pharmaceutical industry were limited to the use of lactose, a potentially allergenic agent or gelatin. Obtained at a relatively low cost from marine brown algae, this hydrocolloid can also be used as a potential tool in the management of diabetes, not only as an insulin delivery agent but also due to its ability to improve insulin resistance, attenuate chronic inflammation and decrease oxidative stress. In addition, alginate has been recognized as a potential weight loss treatment, as alginate supplementation has been used as an adjunct treatment to energy restriction, to enhance satiety and improve weight loss in obese individuals. Thus, alginate holds the promise of an effective product used in the food industry as well as in the management of metabolic disorders such as diabetes and obesity. This review highlights recent research advances on the characteristics of alginate and brings to the forefront the beneficial aspects of using alginate, from the food industry to the biomedical field.

Alginate Calcium Microbeads Containing Chitosan Nanoparticles for Controlled Insulin Release

Effective delivery system for oral insulin administration is a promising way for diabetes therapy. Herein, we prepared alginate microbeads containing chitosan nanoparticles (CNP) for controlled release of insulin. CNP was developed by reaction between tripolyphosphate (TPP) and chitosan. The ratio of TPP to chitosan was optimized aiming with smaller and more unified distributed CNP. TEM and DLS analysis confirmed that CNP has size around 150 nm with low PDI value and strong surface charge. Encapsulate ability for bovine serum albumin, working as model protein, was 11.45%, and the encapsulate efficiency was 23.70%. To modify the release profile of protein suitable for oral insulin delivery, sodium alginate was applied to coat on the surface of CNP by electrostatic interaction. After that, CaCl₂ was added to reinforce the alginate coating layer. FTIR analysis confirmed the interaction of alginate with chitosan and reaction with calcium ion. After reaction with Ca²⁺ ion, size measurement revealed that CNP was incorporated into alginate microbeads with mean diameter about 3.197 μm. Alginate microbeads presented irregular shape with small particles inside as revealed by optical microscope. Meanwhile, the release test demonstrated that protein release was pH-dependent. Acidic pH value retards protein release and neutral pH value promotes protein release. At last, insulin-loaded alginate microbeads were administrated to hyperglycemia model mice and blood glucose profile was monitored afterward. Insulin-loaded microbeads significantly lowered blood glucose level compared with mice treated with alginate microbeads without insulin. It is noted that insulin-loaded alginate microbeads could lower blood glucose level in much prolonged period of 96 h, indicating that insulin was released in controlled manner.