Effect of hydroxyapatite particle size, morphology and crystallinity on proliferation of colon cancer HCT116 cells

Study on the poly(methyl methacrylate-acrylic acid)/calcium phosphate cement composite bound by chelation with enhanced water absorption and biomechanical properties

Polymethylmethacrylate (PMMA) bone cement has been widely used as a critical material for fixing prostheses and filling bone defects. The shrinkage of PMMA bone cement was addressed by the additives, however, the uneven integral water absorption and expansion performance as well as the deteriorated mechanical properties of the modified bone cement after immersion in phosphate buffered saline (PBS) and simulation body fluid (SBF) affected the long-term stability after implantation. Calcium phosphate cement (CPC) is a biomaterial with promising applications in orthopedics, whose hydration reaction provides an important driving force for the transfer of water. Besides, the mechanical properties of CPC can be enhanced with the curing process. In this study, CPC was utilized to modify the poly(methyl methacrylate-acrylic acid) [P(MMA-AA)] bone cement. The results demonstrated the successful construction of interconnected CPC water delivery networks in the P(MMA-AA)/CPC composite, the water absorption ratio and expansion ratio of the composite were up to 131.18 ± 9.14% and 168.19 ± 5.44%, respectively. Meanwhile, the transformation of CPC water delivery networks into rigid mechanical support networks as well as the chelation interaction between organic-inorganic enhanced the mechanical properties of the composite after immersion, the compressive strength after immersion reached 62.97 ± 0.97 MPa, which was 27.65% higher than that before immersion. The degradation ratio of the composite was up to 13.76 ± 0.23% after 9 days of immersion, which was 16.4% higher than that of CPC. Furthermore, composites exhibited superior biocompatibility as the release of Ca2+. Therefore, P(MMA-AA)/CPC composite serves as a promising medical filling material for clinical use.

Hydroxyapatite nanoparticles promote TLR4 agonist-mediated anti-tumor immunity through synergically enhanced macrophage polarization

Macrophages represent the most prevalent immune cells in the tumor micro-environment, making them an appealing target for tumor immunotherapy. One of our previous studies showed that hydroxyapatite nanoparticles (HANPs) enhanced Toll-like receptor 4 (TLR4) signal transduction in macrophages. This study was proposed to investigate how HANPs manipulated the phenotype and function of macrophage against 4T1 tumors in the presence or absence of MPLA, a low toxic Toll-like receptor 4 (TLR4) agonist. The results demonstrated that the addition of HANPs to MPLA significantly promoted cytokine secretion and macrophage polarization toward a tumoricidal M1 phenotype. Further, the resulting supernatant from HANPs/MPLA co-stimulated macrophages enhanced 4T1 tumor cells apoptosis compared to that from macrophages treated with a single component or PBS control. In particular, we found HANPs elicited immunogenic cell death (ICD) indicated by the increased expression of "danger signals", including HMGB1, CRT and ATP in 4T1 cells. Subsequently, the ICD derivatives-containing supernatant from HANPs-treated 4T1 cells activated macrophage and shifted the phenotype of the cells toward M1 type. Moreover, in a tumor-bearing mice model, HANPs and MPLA synergistically delayed tumor growth compared to PBS control, which was positively associated with the promoted macrophage polarization and ICD induction. Therefore, our findings demonstrated a potential platform to modulate the function of macrophages, and shed a new insight into the mechanism involving the immunomodulatory effect of HANPs for tumor therapy. STATEMENT OF SIGNIFICANCE: Polarizing macrophage toward tumoricidal phenotype by harnessing Toll-like receptor (TLR) agonists has been proven effective for tumor immunotherapy. However, the immunomodulatory potency of TLR agonists is limited due to immune suppression or tolerance associated with TLR activation in immune cells. Herein, we introduced hydroxyapatite nanoparticles (HANPs) to MPLA, a TLR4 agonist. The results demonstrated that the addition of HANPs to MPLA promoted macrophage shift toward tumoricidal M1 phenotype, supported a "hot" tumor transformation, and delayed 4T1 tumor growth. Moreover, we found that HANPs elicited immunogenic cell death that produced "danger" signals from cancer cells thereby further facilitated macrophage polarization. This work is significant to direct the rational design of HANPs coupled with or without TLR agonists for tumor immunotherapy.

Polyhydroxybutyrate (PHB) in nanoparticulate form improves physical and biological performance of scaffolds

Polyhydroxyalkanoates (PHAs) are natural polyesters produced by microorganisms as a source of intracellular energy reserves. Due to their desirable material characteristics, these polymers have been thoroughly investigated for tissue engineering and drug delivery applications. A tissue engineering scaffold serves as a substitute of the native extracellular matrix (ECM) and plays a crucial role in tissue regeneration by providing temporary support for cells during natural ECM formation. In this study, porous, biodegradable scaffolds were prepared using native polyhydroxybutyrate (PHB) and PHB in nanoparticulate form using salt leaching method, to investigate the differences in the physicochemical properties such as crystallinity, hydrophobicity, surface morphology, roughness, and surface area and biological properties of the prepared scaffolds. As per the BET analysis, PHB nanoparticles-based (PHBN) scaffolds presented a significant difference in the surface area as compare to PHB scaffolds. PHBN scaffolds showed decreased crystallinity and improved mechanical strength as compared to PHB scaffolds. Thermogravimetry analysis shows delayed degradation of PHBN scaffolds. An examination of Vero cell lines' cell viability and adhesion over time revealed enhanced performance of PHBN scaffolds. Our research suggests that scaffold made of PHB nanoparticles could serve as a superior material for tissue engineering applications than its native form.

Biomaterial-assisted tumor therapy: A brief review of hydroxyapatite nanoparticles and its composites used in bone tumors therapy

Malignant bone tumors can inflict significant damage to affected bones, leaving patients to contend with issues like residual tumor cells, bone defects, and bacterial infections post-surgery. However, hydroxyapatite nanoparticles (nHAp), the principal inorganic constituent of natural bone, possess numerous advantages such as high biocompatibility, bone conduction ability, and a large surface area. Moreover, nHAp's nanoscale particle size enables it to impede the growth of various tumor cells via diverse pathways. This article presents a comprehensive review of relevant literature spanning the past 2 decades concerning nHAp and bone tumors. The primary goal is to explore the mechanisms responsible for nHAp's ability to hinder tumor initiation and progression, as well as to investigate the potential of integrating other drugs and components for bone tumor diagnosis and treatment. Lastly, the article discusses future prospects for the development of hydroxyapatite materials as a promising modality for tumor therapy.

Synthesis and characterization of rod-like amino acids/nanohydroxyapatite composites to inhibit osteosarcoma

In this study, rod-like hydroxyapatite (HA) with uniform morphology and controllable particle size modified by doping with two different amino acids (alanine and threonine) was synthesized by a microwave hydrothermal method. The physical and chemical properties of the composites were tested by utilizing X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), general thermogravimetric analysis (TG) and scanning electron microscopy (SEM). The SEM and XRD results show that the presence of amino acids (especially threonine) can significantly reduce the aspect ratio and crystallinity of hydroxyapatite. Pure hydroxyapatite and modified hydroxyapatite doped with two different proportions of amino acids were cultured with mouse osteoblasts (MC3T3-E1) for 1, 3 and 5 days, respectively, nanohydroxyapatite modified by threonine has better biocompatibility compared with pure hydroxyapatite. The amino acid-modified hydroxyapatite samples were co-cultured with osteosarcoma cells (MG63) for 1, 4 and 7 days, respectively, and showed better inhibitory effects on osteosarcoma cells. The nanohydroxyapatite doped with amino acids could be used as a potential drug that promotes bone repair and inhibits the growth of osteosarcoma cells.

Hydroxyapatite nanoparticles-cell interaction: New approaches to disclose the fate of membrane-bound and internalised nanoparticles

Hydroxyapatite nanoparticles are popular tools in bone regeneration, but they have also been used for gene delivery and as anticancer drugs. Understanding their mechanism of action, particularly for the latter application, is crucial to predict their toxicity. To this end, we aimed to elucidate the importance of nanoparticle membrane interactions in the cytotoxicity of MG-63 cells using two different types of nanoparticles. In addition, conventional techniques for studying nanoparticle internalisation were evaluated and compared with newer and less exploited approaches. Hydroxyapatite and magnesium-doped hydroxyapatite nanoparticles were used as suspensions or compacted as specular discs. Comparison between cells seeded on the discs and those supplemented with the nanoparticles allowed direct interaction of the cell membrane with the material to be ruled out as the main mechanism of toxicity. In addition, standard techniques such as flow cytometry were inconclusive when used to assess nanoparticles toxicity. Interestingly, the use of intracellular calcium fluorescent probes revealed the presence of a high number of calcium-rich vesicles after nanoparticle supplementation in cell culture. These structures could not be detected by transmission electron microscopy due to their liquid content. However, by using cryo-soft X-ray imaging, which was used to visualise the cellular ultrastructure without further treatment other than vitrification and to quantify the linear absorption coefficient of each organelle, it was possible to identify them as multivesicular bodies, potentially acting as calcium stores. In the study, an advanced state of degradation of the hydroxyapatite and magnesium-doped hydroxyapatite nanoparticles within MG-63 cells was observed. Overall, we demonstrate that the combination of fluorescent calcium probes together with cryo-SXT is an excellent approach to investigate intracellular calcium, especially when found in its soluble form.

Hydroxyapatite Biobased Materials for Treatment and Diagnosis of Cancer

Great advances in cancer treatment have been undertaken in the last years as a consequence of the development of new antitumoral drugs able to target cancer cells with decreasing side effects and a better understanding of the behavior of neoplastic cells during invasion and metastasis. Specifically, drug delivery systems (DDS) based on the use of hydroxyapatite nanoparticles (HAp NPs) are gaining attention and merit a comprehensive review focused on their potential applications. These are derived from the intrinsic properties of HAp (e.g., biocompatibility and biodegradability), together with the easy functionalization and easy control of porosity, crystallinity and morphology of HAp NPs. The capacity to tailor the properties of DLS based on HAp NPs has well-recognized advantages for the control of both drug loading and release. Furthermore, the functionalization of NPs allows a targeted uptake in tumoral cells while their rapid elimination by the reticuloendothelial system (RES) can be avoided. Advances in HAp NPs involve not only their use as drug nanocarriers but also their employment as nanosystems for magnetic hyperthermia therapy, gene delivery systems, adjuvants for cancer immunotherapy and nanoparticles for cell imaging.

Anti-melanoma effect and action mechanism of a novel chitosan-based composite hydrogel containing hydroxyapatite nanoparticles

Hydroxyapatite nanoparticles (HANPs) have been increasingly regarded and reported due to their potential anti-tumor ability. Previously, we found that the rod-like HANPs had good application potential for cutaneous melanoma (CMM). To satisfy the actual requirements in repairing post-operative skin defects and inhibiting CMM recurrence after tumorectomy, we constructed a novel chitosan/alginate (CS/Alg) hydrogel containing the aforementioned HANPs. The in vitro cell experiments confirmed that activated mitochondrial-dependent apoptosis was tightly related to the anti-tumor ability of HANPs. Specifically, we further discovered several target proteins might be involved in abnormal activating Wnt, proteoglycans in cancer, oxidative phosphorylation and p53 signaling pathways. The in vivo animal experiments demonstrated that the HANPs-loaded CS/Alg hydrogel (CS/Alg/HANPs) had a similar effect on inhibiting tumor growth as HANPs, and CS/Alg hydrogel as well as phosphate buffered saline (PBS) group (control) not showed any effect, proving the key role of HANPs. The immunohistochemical staining demonstrated a tumor inhibition via the mitochondria-mediated apoptosis pathway, consistent with the in vitro evaluation. Moreover, CS/Alg/HANPs exhibited no additional biosafety risk to the functions of major organs. Overall, this CS/Alg/HANPs hydrogel has substantial application potential for treating CMM.

Hydroxyapatite Nanoparticles for Improved Cancer Theranostics

Beyond their well-known applications in bone tissue engineering, hydroxyapatite nanoparticles (HAp NPs) have also been showing great promise for improved cancer therapy. The chemical structure of HAp NPs offers excellent possibilities for loading and delivering a broad range of anticancer drugs in a sustained, prolonged, and targeted manner and thus eliciting lower complications than conventional chemotherapeutic strategies. The incorporation of specific therapeutic elements into the basic composition of HAp NPs is another approach, alone or synergistically with drug release, to provide advanced anticancer effects such as the capability to inhibit the growth and metastasis of cancer cells through activating specific cell signaling pathways. HAp NPs can be easily converted to smart anticancer agents by applying different surface modification treatments to facilitate the targeting and killing of cancer cells without significant adverse effects on normal healthy cells. The applications in cancer diagnosis for magnetic and nuclear in vivo imaging are also promising as the detection of solid tumor cells is now achievable by utilizing superparamagnetic HAp NPs. The ongoing research emphasizes the use of HAp NPs in fabricating three-dimensional scaffolds for the treatment of cancerous tissues or organs, promoting the regeneration of healthy tissue after cancer detection and removal. This review provides a summary of HAp NP applications in cancer theranostics, highlighting the current limitations and the challenges ahead for this field to open new avenues for research.

Combination of Goniothalamin and Sol-Gel-Derived Bioactive Glass 45S5 Enhances Growth Inhibitory Activity via Apoptosis Induction and Cell Cycle Arrest in Breast Cancer Cells MCF-7

Background

Combination of natural products with chemically synthesised biomaterials as cancer therapy has attracted great interest lately. Hence, this study is aimed at investigating the combined effects of goniothalamin and bioactive glass 45S5 (GTN-BG) and evaluating their anticancer properties on human breast cancer cells MCF-7.

Methods

The BG 45S5 was prepared using the sol-gel process followed by characterisation using PSA, BET, SEM/EDS, XRD, and FTIR. The effects of GTN-BG on the proliferation of MCF-7 were assessed by MTT, PrestoBlue, and scratch wound assays. The cell cycle analysis, Annexin-FITC assay, and activation of caspase-3/7, caspase-8, and caspase-9 assays were determined to further explore its mechanism of action.

Results

The synthesised BG 45S5 was classified as a fine powder, having a rough surface, and contains mesopores of 12.6 nm. EDS analysis revealed that silica and calcium elements are the primary components of BG powders. Both crystalline and amorphous structures were detected with 73% and 27% similarity to Na₂Ca₂(Si₂O₇) and hydroxyapatite, respectively. The combination of GTN-BG was more potent than GTN in inhibiting the proliferation of MCF-7 cells. G0/G1 and G2/M phases of the cell cycle were arrested by GTN and GTN-BG. The percentage of viable cells in GTN-BG treatment was significantly lower than that in GTN. In terms of activation of initiator caspases for both extrinsic and intrinsic apoptosis pathways, caspase-8 and caspase-9 were found more effective in response to GTN-BG than GTN.

Conclusion

The anticancer effect of GTN in MCF-7 cells was improved when combined with BG. The findings provide significant insight into the mechanism of GTN-BG against MCF-7 cells, which can potentially be used as a novel anticancer therapeutic approach.

Progress on carbon dots and hydroxyapatite based biocompatible luminescent nanomaterials for cancer theranostics

•

Biocompatible carbon dots (CDs) and nanohydroxyapatite (nHA) have attracted much attention for the development of optical imaging probes.

•

This review discusses the development of CD and nHA based nanomaterials as multifunctional agents for cancer theranostics.

•

The effect of synthesis strategies and doping on photoluminescent properties along with tuning of emission in biological window has been briefly reviewed.

•

The cancer targeting strategies, biocompatibility and biodistribution of CDs and nHA based luminescent probes is discussed.

•

A summary of current challenges and future perspectives is provided.

Despite the significant advancement in cancer diagnosis and therapy, a huge burden remains. Consequently, much research has been diverted on the development of multifunctional nanomaterials for improvement in conventional diagnosis and therapy. Luminescent nanomaterials offer a versatile platform for the development of such materials as their intrinsic photoluminescence (PL) property offers convergence of diagnosis as well as therapy at the same time. However, the clinical translation of nanomaterials faces various challenges, including biocompatibility and cost-effective scale up production. Thus, luminescent materials with facile synthesis approach along with intrinsic biocompatibility and anticancerous activity hold significant importance. As a result, carbon dots (CDs) and nanohydroxyapatite (nHA) have attracted much attention for the development of optical imaging probes. CDs are the newest members of the carbonaceous nanomaterials family that possess intrinsic luminescent and therapeutic properties, making them a promising candidate for cancer theranostic. Additionally, nHA is an excellent bioactive material due to its compositional similarity to the human bone matrix. The nHA crystal can efficiently host rare-earth elements to attain luminescent property, which can further be implemented for cancer theranostic applications. Herein, the development of CDs and nHA based nanomaterials as multifunctional agents for cancer has been briefly discussed. The emphasis has been given to different synthesis strategies leading to different morphologies and tunable PL spectra, followed by their diverse applications as biocompatible theranostic agents. Finally, the review has been summarized with the current challenges and future perspectives.

Loaded n-Hydroxyapatite/SSG 3D Scaffolds as a Drug Delivery System of Nigella sativa Fractions for the Management of Local Antibacterial Infections

As a result of their close similarities to the inorganic mineral components of human bone, hydroxyapatite nanoparticles (n-HAp) are widely used in biomedical applications and for the elaboration of biocompatible scaffold drug delivery systems for bone tissue engineering. In this context, a new efficient and economic procedure was used for the consolidation of n-HAp in the presence of various Nigella sativa (NS) fractions at a near-room temperature. The research conducted in the present study focuses on the physicochemical properties of loaded n-HAp 3D scaffolds by NS fractions and the in vitro antibacterial activity against Gram-negative (Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, Klebsiella pneumoniae ATCC 27853), and Gram-positive (Staphylococcus aureus ATCC 29213, Enterococcus faecalis ATCC 700603) bacteria. In order to better understand the effect of the inserted fractions on the HAp molecular structure, the elaborated samples were subject to Fourier transform infrared (FTIR) and X-ray diffraction (XRD) spectroscopic analyses. In addition, the morphological investigation by scanning electron microscope (SEM) of the loaded n-HAp 3D scaffolds demonstrated the presence of a porous structure, which is generally required in stimulating bone regeneration. Furthermore, the fabricated 3D composites exhibited significant antibacterial activity against all tested bacteria. Indeed, MIC values ranging from 5 mg/mL to 20 mg/mL were found for the HAp-Ethanol fraction (HAp-Et) and HAp-Hexane fraction (HAp-Hex), while the HAp-Aqueous fraction (HAp-Aq) and HAp-Methanol fraction (HAp-Me) showed values between 20 mg/mL and 30 mg/mL on the different strains. These results suggest that the HAp-NS scaffolds were effective as a drug delivery system and have very promising applications in bone tissue engineering.

Stimulation of Metabolic Activity and Cell Differentiation in Osteoblastic and Human Mesenchymal Stem Cells by a Nanohydroxyapatite Paste Bone Graft Substitute

Advances in nanotechnology have been exploited to develop new biomaterials including nanocrystalline hydroxyapatite (nHA) with physical properties close to those of natural bone mineral. While clinical data are encouraging, relatively little is understood regarding bone cells’ interactions with synthetic graft substitutes based on this technology. The aim of this research was therefore to investigate the in vitro response of both osteoblast cell lines and primary osteoblasts to an nHA paste. Cellular metabolic activity was assessed using the cell viability reagent PrestoBlue and quantitative, real-time PCR was used to determine gene expression related to osteogenic differentiation. A potential role of calcium-sensing receptor (CaSR) in the response of osteoblastic cells to nHA was also investigated. Indirect contact of the nHA paste with human osteoblastic cells (Saos-2, MG63, primary osteoblasts) and human bone marrow-derived mesenchymal stem cells enhanced the cell metabolic activity. The nHA paste also stimulated gene expression of runt-related transcription factor 2, collagen 1, alkaline phosphatase, and osteocalcin, thereby indicating an osteogenic response. CaSR was not involved in nHA paste-induced increases in cellular metabolic activity. This investigation demonstrated that the nHA paste has osteogenic properties that contribute to clinical efficacy when employed as an injectable bone graft substitute.

Biomimetic 3D-printed PCL scaffold containing a high concentration carbonated-nanohydroxyapatite with immobilized-collagen for bone tissue engineering: enhanced bioactivity and physicomechanical characteristics

A challenging approach of three-dimensional (3D)-biomimetic scaffold design for bone tissue engineering is to improve scaffold bioactivity and mechanical properties. We aimed to design and fabricate 3D-polycaprolactone (PCL)-based nanocomposite scaffold containing a high concentration homogeneously distributed carbonated-nanohydroxyapatite (C-nHA)-particles in combination with immobilized-collagen to mimic real bone properties. PCL-scaffolds without/with C-nHA at 30%, 45%, and 60% (wt/wt) were 3D-printed. PCL/C-nHA60%-scaffolds were surface-modified by NaOH-treatment and collagen-immobilization. Physicomechanical and biological properties were investigated experimentally and by finite-element (FE) modeling. Scaffold surface-roughness enhanced by increasing C-nHA (1.7 - 6.1-fold), but decreased by surface-modification (0.6-fold). The contact angle decreased by increasing C-nHA (0.9 - 0.7-fold), and by surface-modification (0.5-fold). The zeta potential decreased by increasing C-nHA (3.2-9.9-fold). Average elastic modulus, compressive strength, and reaction force enhanced by increasing C-nHA and by surface-modification. FE modeling revealed that von Mises stress distribution became less homogeneous by increasing C-nHA, and by surface-modification. Maximal von Mises stress for 2% compression strain in all scaffolds did not exceed yield stress for bulk-material. 3D-printed PCL/C-nHA60% with surface-modification enhanced pre-osteoblast spreading, proliferation, collagen deposition, alkaline phosphatase activity, and mineralization. In conclusion, a novel biomimetic 3D-printed PCL-scaffold containing a high concentration C-nHA with surface-modification was successfully fabricated. It exhibited superior physicomechanical and biological properties, making it a promising biomaterial for bone tissue engineering.

Fabrication of nanoparticles for bone regeneration: new insight into applications of nanoemulsion technology

Introducing synthetic bone substitutes into the clinic was a major breakthrough in the regenerative medicine of bone. Despite many advantages of currently available bone implant materials such as biocompatiblity and osteoconductivity, they still suffer from relatively poor bioactivity, osteoinductivity and osteointegration. These properties can be effectively enhanced by functionalization of implant materials with nanoparticles such as osteoinductive hydroxyapatite nanocrystals, resembling inorganic part of the bone, or bioactive polymer nanoparticles providing sustained delivery of pro-osteogenic agents directly at implantation site. One of the most widespread techniques for fabrication of nanoparticles for bone regeneration applications is nanoemulsification. It allows manufacturing of nanoscale particles (<100 nm) that are injectable, 3D-printable, offer high surface-area-to-volume-ratio and minimal mass transport limitations. Nanoparticles obtained by this technique are of particular interest for biomedical engineering due to fabrication procedures requiring low surfactant concentrations, which translates into reduced risk of surfactant-related in vivo adverse effects and improved biocompatibility of the product. This review discusses nanoemulsion technology and its current uses in manufacturing of nanoparticles for bone regeneration applications. In the first section, we introduce basic concepts of nanoemulsification including nanoemulsion formation, properties and preparation methods. In the next sections, we focus on applications of nanoemulsions in fabrication of nanoparticles used for delivery of drugs/biomolecules facilitating osteogenesis and functionalization of bone implants with special emphasis on biomimetic hydroxyapatite nanoparticles, synthetic polymer nanoparticles loaded with bioactive compounds and bone-targeting nanoparticles. We also highlight key challenges in formulation of nanoparticles via nanoemulsification and outline potential further improvements in this field.

Evaluating the Radiosensitization Effect of Hydroxyapatite Nanoparticles on Human Breast Adenocarcinoma Cell Line and Fibroblast

Background:

Nanohydroxyapatite (nHAP) exhibit anti-proliferative effects on various cancer cells. However, to date, there are only a few studies on the radiosensitization effect of nHAP. The present study aimed to investigate the possible enhancement of the radiosensitization effect of nHAP on human breast adenocarcinoma cancer (MCF-7) and fibroblast.

Methods:

nHAP was extracted from fish scales using the thermal alkaline method and characterized at Babol University of Medical Sciences (Babol, Iran) in 2017. The anti-proliferative and the radiosensitization effects of nHAP were investigated by 3-(4, 5-Dimethylthiazol-2-yl)-2, 5-Diphenyltetrazolium Bromide (MTT), clonogenic assay, and apoptosis assay. MCF-7 cells and fibroblasts were incubated with different concentrations of nHAP and at different periods. The MTT solution was added and the absorbance was measured at 570 nm. The MCF-7 cells were exposed to 0, 1.5, 3.5, and 5 Gy X-ray irradiation and incubated for 10-14 days. The data were compared using the one-way analysis of variance (ANOVA) followed by the post hoc tests (Tukey’s method).

Results:

The results showed that nHAP significantly inhibited the growth of MCF-7 cells compared with controls (P<0.001), but the difference was not statistically significant for fibroblasts (P=0.686 at 400 µg/mL at 72 hours). After 48 hours, the proliferation of MCF-7 cells and fibroblasts was inhibited by about 81% and 34% at 400 µg/mL concentration, respectively. The radiosensitization enhancement factor for MCF-7 cells and fibroblasts at a dose of 3.5 Gy and 100 μg/mL concentration were 1.87 and 1.3, respectively.

Conclusion:

nHAP can be considered as a breast cancer radiosensitization agent with limited damage to the surrounding healthy tissue.

A novel hydrothermal synthesis of nanohydroxyapatite from eggshell-calcium-oxide precursors

Hydroxyapatite (HA) is a material that has been widely applied to replace the damaged bone as a bone implant. Different types of HA have been successfully synthesized by a hydrothermal method based on calcium oxide (CaO) which was originated from chicken eggshells and diammonium hydrogen phosphate (DHP)/(NH4)2HPO4 as their precursors. We present a novel approach to the hydrothermal synthesis of HA form eggshells as a new precursor via a one-step synthesis method. The influence of temperature was also observed to study the effect on the crystallinity, purity, and morphology of obtained HAs. The synthesis was carried out at two different temperatures, 200 °C (HA-200) and 230 °C (HA-230) for 48 h respectively. The structures, purities, and morphologies of hydroxyapatite were analyzed by X-ray Diffraction (XRD), Fourier Transform Infra-Red (FTIR), and Scanning Electron Microscopy- Energy Dispersive Spectroscopy (SEM-EDS), and Transmission electron microscopy (TEM). The XRD patterns show the HA main phase indicated the purity of 96.5% for HA-200 and 99.5% for HA-230. The TEM micrograph suggested a hexagonal-like of HA with an average particle size of 92.61 nm. Hexagonal-like of HAs are suitable for bone implants and further application.

Chlorapatite Derived From Fish Scales

The present work demonstrates the production of chlorapatite (ClAp) through thermal decomposition of chemically treated fish scales, originating from an Amazon fish species (Arapaima gigas). The scales were treated with hydrochloric acid (HCl) solution for deproteinization. Afterwards, the solution was neutralized by sodium hydroxide (NaOH) treatment to obtain an apatite-rich slurry. The heat treatment was carried out at different temperatures including 600 °C, 800 °C, and 1000 °C. The powders obtained were characterized through X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDS), and scanning electron microscopy (SEM). The XRD analysis and FTIR spectra confirmed the incorporation of chlorine into the apatite structure. The FTIR results showed absorption bands relative to the OH^-, PO₄^3- functional groups which are a characteristic of chlorapatite; moreover, the intensity of the OH-Cl elongation could be observed. Chlorapatite Ca₅(PO₄)₃Cl, NaCl, and NaCaPO₄ phases were identified, achieving up to 87.4 wt% for ClAp. From the SEM observations, the ClAp obtained consisted of slightly larger grains and more crystalline with increasing temperature with observed grains ranging in sizes between 1 and 5 μm and 84.27% crystallinity for the ClAp1000 sample. The ClAp and NaCaPO₄ can be used in electronics as a phosphor material due to the fact of its luminescence and biomedical applications.

Anti-osteosarcoma effect of hydroxyapatite nanoparticles both in vitro and in vivo by downregulating the FAK/PI3K/Akt signaling pathway

Schematic representing the anti-cancer effects of nano-HAPs both in vitro and in vivo by downregulating the FAK/PI3K/Akt signaling pathway.

Pathophysiological Implication of Fetuin-A Glycoprotein in the Development of Metabolic Disorders: A Concise Review

Alpha 2-Heremans-Schmid glycoprotein, also known as fetuin-A (Fet-A), is a multifunctional plasma glycoprotein that has been identified in both animal and human beings. The protein is a hepatokine predominantly synthesized in the liver, which is considered as an important component of diverse normal and pathological processes, including bone metabolism regulation, vascular calcification, insulin resistance, and protease activity control. Epidemiological studies have already consistently demonstrated significant elevated circulating Fet-A in the course of obesity and related complications, such as type 2 diabetes mellitus, metabolic syndrome, and nonalcoholic fatty liver disorder (NAFLD). Moreover, Fet-A has been strongly correlated with many parameters related to metabolic homeostasis dysregulation, such as insulin sensitivity, glucose tolerance, circulating lipid levels (non-esterified free fatty acids and triglycerides), and circulating levels of both pro- and anti-inflammatory factors (C-reactive protein, tumor necrosis factor-α (TNF-α), and interleukin (IL)-6). Metabolic-interfering effects of Fet-A have thus been shown to highly exacerbate insulin resistance (IR) through blocking insulin-stimulated glucose transporter 4 (GLUT-4) translocation and protein kinase B (Akt) activation. Furthermore, the protein appeared to interfere with downstream phosphorylation events in insulin receptor and insulin receptor substrate signaling. The emerging importance of Fet-A for both diagnosis and therapeutics has therefore come to the attention of researchers and the pharmaceutical industry, in the prospect of developing new therapeutic strategies and diagnosis methods for metabolic disorders.

Application of hydroxyapatite nanoparticles in tumor-associated bone segmental defect

Hydroxyapatite (HA) has been widely applied in bone repair because of its superior biocompatibility. Recently, a proliferation-suppressive effect of HA nanoparticles (n-HA) against various cancer cells was reported. This study was aimed at assessing the translational value of n-HA both as a bone-regenerating material and as an antitumor agent. Inhibition of tumor growth, prevention of metastasis, and enhancement of the survival rate of tumor-bearing rabbits treated with n-HA were demonstrated. Activated mitochondrial-dependent apoptosis in vivo was confirmed, and we observed that a stimulated immune response was involved in the n-HA-induced antitumor effect. A porous titanium scaffold loaded with n-HA was fabricated and implanted into a critical-sized segmental bone defect in a rabbit tumor model. The n-HA-releasing scaffold not only showed a prominent effect in suppressing tumor growth and osteolytic lesion but also promoted bone regeneration. These findings provide a rationale for using n-HA in tumor-associated bone segmental defects.

3D Microfluidic Bone Tumor Microenvironment Comprised of Hydroxyapatite/Fibrin Composite

Bone is one of the most common sites of cancer metastasis, as its fertile microenvironment attracts tumor cells. The unique mechanical properties of bone extracellular matrix (ECM), mainly composed of hydroxyapatite (HA) affect a number of cellular responses in the tumor microenvironment (TME) such as proliferation, migration, viability, and morphology, as well as angiogenic activity, which is related to bone metastasis. In this study, we engineered a bone-mimetic microenvironment to investigate the interactions between the TME and HA using a microfluidic platform designed for culturing tumor cells in 3D bone-mimetic composite of HA and fibrin. We developed a bone metastasis TME model from colorectal cancer (SW620) and gastric cancer (MKN74) cells, which has very poor prognosis but rarely been investigated. The microfluidic platform enabled straightforward formation of 3D TME composed the hydrogel and multiple cell types. This facilitated monitoring of the effect of HA concentration and culture time on the TME. In 3D bone mimicking culture, we found that HA rich microenvironment affects cell viability, proliferation and cancer cell cytoplasmic volume in a manner dependent on the different metastatic cancer cell types and culture duration indicating the spatial heterogeneity (different origin of metastatic cancer) and temporal heterogeneity (growth time of cancer) of TME. We also found that both SW620 and MKN72 cells exhibited significantly reduced migration at higher HA concentration in our platform indicating inhibitory effect of HA in both cancer cells migration. Next, we quantitatively analyzed angiogenic sprouts induced by paracrine factors that secreted by TME and showed paracrine signals from tumor and stromal cell with a high HA concentration resulted in the formation of fewer sprouts. Finally we reconstituted vascularized TME allowing direct interaction between angiogenic sprouts and tumor-stroma microspheroids in a bone-mimicking microenvironment composing a tunable HA/fibrin composite. Our multifarious approach could be applied to drug screening and mechanistic studies of the metastasis, growth, and progression of bone tumors.

Biocomposites based on hydroxyapatite matrix reinforced with nanostructured monticellite (CaMgSiO4) for biomedical application: Synthesis, characterization, and biological studies

In this study, a simple and facile strategy was developed for the synthesis of novel hydroxyapatite (HA)/nanostructured monticellite ceramic composites by mechanical method. X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive x-ray spectroscopy (EDS) were used to peruse the phase structure, and morphology of soaked ceramic composites in simulated body fluid (SBF). The in vitro bioactivity of HA-based ceramic composites with nanostructured monticellite ranging from 0 to 50 wt% was evaluated via investigating the formation ability of bone-like calcium phosphates in SBF and the effect of obtained extracts from composites dissolution on osteoblast-like G-292 cell line. Moreover, In vitro cytocompatibility of the HA/monticellite ceramic composites was investigated by MTT, cell growth & adhesion and alkaline phosphatase (ALP) activity assays, and quantitative real-time PCR analysis. The results showed that HA/nanostructured monticellite ceramic composites could induce apatite formation in SBF. The cell proliferation and growth exposed to ceramic composites extracts were significantly stimulated and promoted at a certain concentration range compared to control for various time periods of cell culture. The optimized composite extract enhanced considerably gene expression of G-292 type X collagen (COLX) at different days. Also, G-292 cells were spread and adhered well on the ceramic composite disc. Furthermore, ALP activity of G-292 cells exposed to ceramic composites extracts was dramatically enhanced in comparison with pure HA extract (as control) at different concentrations for various time periods of cell culture. The results suggest that the optimized HA/nanostructured monticellite composite is promising biomaterial for clinical applications such as orthopedic and dentistry.

Effect of fluorine substitution on sintering behaviour, mechanical and bioactivity of hydroxyapatite

Fluorine substituted hydroxyapatite (FAp) with different degree of fluorine (F) substitution, has been synthesized using hydrothermal synthesis method. In the present work, as synthesized powders were consolidated by sintering at 1200 °C in air for 1 h. The sintered specimens were characterized using Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) for phase analysis. Further, fluorine intake in the sintered specimens was evaluated using ion chromatography (IC). XRD peaks clearly showed biphasic nature of the sintered specimen. However, the sintered samples containing more than ∼60% fluorine substitution showed no β-tricalcium phosphate (β-TCP) phase formation. The IC results revealed that the degree of fluoridation decreased significantly in the sintered specimen compare to the respective as synthesized powders. The effect of actual fluorine content in the sintered specimens was further evaluated in terms of sinterability, surface energy, mechanical properties and in vitro cytocompatibility study. The surface energy of the sintered specimen decreased from 51.8 mN/m to 42.5 mN/m, in which degree of fluoridation varies from 0% to 110%. The in vitro cytocompatibility of the sintered specimen were carried out against mouse osteoblast cell line (MC3T3-E1). In vitro study showed that all the samples were nontoxic but cell proliferation for the samples containing more than 40% fluorine substitution became significantly low.

Nano hydroxyapatite induces glioma cell apoptosis by suppressing NF-κB signaling pathway

Nano-sized hydroxyapatite (nHA) particles have been demonstrated to exert anti-cancer effects on multiple cancer cell lines and animal models of cancer biology. However, the molecular mechanism underlying the effects of nHA particles on glioma cells remains unclear. The present study aimed to examine the effects of nHA on the behavior of glioma cells and investigate its underlying molecular mechanism. Rat glioma C6 cells and human glioma U87MG ATCC cells were exposed to nHA (20–100 µg/ml), and its effects on cell morphology, viability, apoptosis, cell cycle, invasion and nuclear factor (NF)-κB signaling were analyzed. Exposure of C6 and U87MG ATCC cells to 20 µg/ml nHA for 24 h caused cell detachment. Viability of C6 and U87MG ATCC cells were significantly reduced by nHA in a dose-dependent manner (P<0.05). Nuclear staining with Hoechst 33258 exhibited clear chromatin condensation in C6 cells following 24 h exposure to ≥25 µg/ml nHA. Flow cytometry revealed that nHA (20–100 µg/ml) significantly induced apoptosis and cell cycle G2/M arrest in C6 and U87MG ATCC cells (P<0.05). Transwell invasion assay demonstrated that nHA (20–60 µg/ml) significantly inhibited invasion of U87MG ATCC cells (P<0.05). Furthermore, western blotting and confocal immunofluorescence microscopy revealed that nHA (20–100 µg/ml) decreased NF-κB p65 protein expression and blocked NF-κB p65 nuclear translocation in C6 cells. The protein expression of NF-κB target molecules, such as B cell lymphoma 2, cyclooxygenase-2 and survivin, were also significantly reduced by nHA in a dose-dependent manner in both C6 and U87MG ATCC cells (P<0.05). In conclusion, it was demonstrated that the inhibitory effect of nHA on glioma cells is likely associated with the downregulation of NF-κB signaling.

3D Microfluidic Bone Tumor Microenvironment Comprised of Hydroxyapatite/Fibrin Composite

Bone is one of the most common sites of cancer metastasis, as its fertile microenvironment attracts tumor cells. The unique mechanical properties of bone extracellular matrix (ECM), mainly composed of hydroxyapatite (HA) affect a number of cellular responses in the tumor microenvironment (TME) such as proliferation, migration, viability, and morphology, as well as angiogenic activity, which is related to bone metastasis. In this study, we engineered a bone-mimetic microenvironment to investigate the interactions between the TME and HA using a microfluidic platform designed for culturing tumor cells in 3D bone-mimetic composite of HA and fibrin. We developed a bone metastasis TME model from colorectal cancer (SW620) and gastric cancer (MKN74) cells, which has very poor prognosis but rarely been investigated. The microfluidic platform enabled straightforward formation of 3D TME composed the hydrogel and multiple cell types. This facilitated monitoring of the effect of HA concentration and culture time on the TME. In 3D bone mimicking culture, we found that HA rich microenvironment affects cell viability, proliferation and cancer cell cytoplasmic volume in a manner dependent on the different metastatic cancer cell types and culture duration indicating the spatial heterogeneity (different origin of metastatic cancer) and temporal heterogeneity (growth time of cancer) of TME. We also found that both SW620 and MKN72 cells exhibited significantly reduced migration at higher HA concentration in our platform indicating inhibitory effect of HA in both cancer cells migration. Next, we quantitatively analyzed angiogenic sprouts induced by paracrine factors that secreted by TME and showed paracrine signals from tumor and stromal cell with a high HA concentration resulted in the formation of fewer sprouts. Finally we reconstituted vascularized TME allowing direct interaction between angiogenic sprouts and tumor-stroma microspheroids in a bone-mimicking microenvironment composing a tunable HA/fibrin composite. Our multifarious approach could be applied to drug screening and mechanistic studies of the metastasis, growth, and progression of bone tumors.

Fetuin-A – Alpha2-Heremans-Schmid Glycoprotein: From Structure to a Novel Marker of Chronic Diseases Part 1. Fetuin-A as a Calcium Chaperone and Inflammatory Marker

Fetuin-A is a major plasma glycoprotein released mainly by the liver. Its functions include inhibition of the activity of insulin receptor, regulation of response to inflammation, inhibition of calcified matrix metabolism and ectopic mineralization, etc. Three major functional domains of fetuin-A have been identified: one similar to the Ca-binding domains, one inhibiting cysteine protease, and a domain with high affinity to insulin receptor. The fetuin-A molecule may be considered as a highly pleomorphic protein with an important impact in a variety of clinically expressed metabolic and pathological processes. It could be used as a marker in clinical practice in the future.

Natural calcium phosphates from fish bones and their potential biomedical applications

The treatment and recovery of bio-wastes have raised considerable attention both from the environmental and economic point of view. Every year, a remarkable amount of fish processing by-products are generated and dumped as waste from all over the world. Fish bones can serve as a raw material for the production of high value-added compounds that can be used in various sectors including agrochemical, biomedical, food and pharmaceutical industries. The calcination of fish bones results in a single phase (hydroxyapatite) or bi-phasic (hydroxyapatite-tricalcium phosphate) bioceramics depending on the processing conditions as well as the content of the fish bones. This review summarizes the literature on the production of hydroxyapatite from fish bones and discusses their potential applications in biomedical field. The effect of processing conditions on the properties of final products including Ca/P ratio, crystal structure, particle shape, particle size and biological properties are presented in the light of X-ray diffraction, scanning electron microscopy, transmission electron microscopy, thermogravimetric-differential thermal analysis, bioactivity and biocompatibility investigations.

Hydroxyapatite nanocrystals as a smart, pH sensitive, delivery system for kiteplatin

Hydroxyapatite (HA) nanocrystals are important inorganic constituents of biological hard tissues in vertebrates and have been proposed as a bone substitute or a coating material for prostheses in biomedicine. Hydroxyapatite is also amenable for its capacity to bind to a great variety of biomolecules and therapeutic agents. As drug carriers, apatite nanoparticles also have the advantage of pH dependent solubility and low toxicity. Thus HA nanoparticles are negligibly soluble at physiological pH but their dissolution is accelerated at lower pH such as that typically found in the vicinity of tumors. In the present study we have investigated the adsorption on and the release from biomimetic HA nanoparticles of two platinum derivatives of cis-1,4-diaminocyclohexane ([PtX2(cis-1,4-DACH)], X2 = Cl2 (1) and 1,1-cyclobutanedicarboxylate (CBDCA, 2)). The first of the two compounds proved to be active against colon cancer cells also resistant to oxaliplatin. The release has been investigated as a function of pH to mimic the different physiological environments of healthy tissues and tumors, and the in vitro cytotoxicity of the releasates from the HA matrices has been assessed against various human cancer cell lines. The results fully confirmed the potential of 1-loaded HA nanoparticles as bone-specific drug delivery devices.

Fabrication and Use of Poly(d,l-lactide-co-glycolide)-Based Formulations Designed for Modified Release of 5-Fluorouracil

5-fluorouracil (5-FU) is a chemotherapeutic agent that has been used for the treatment of a variety of malignancies since its initial introduction to the clinic in 1957. Owing to its short biological half-life, multiple dosings are generally required to maintain effective 5-FU plasma concentrations throughout the therapeutic period. Clinical studies have shown that continuous 5-FU administration is generally superior to bolus injection as exhibited by lower toxicities and increased therapeutic efficacy. Optimal therapeutic efficacy, however, is often compromised by the limiting therapeutic index. Whilst oral formulations are also used, these suffer from the drawbacks of variable bioavailability and first-pass metabolism. As a result, sustained release formulations of 5-FU have been investigated in an effort to mimic the kinetics of continuous infusion particularly for situations where local delivery is considered appropriate. The biocompatible, biodegradable, and highly tunable synthetic polymer, poly(d,l-lactide-co-glycolide) (PLGA), is widely used as a vector for sustained drug delivery, however, issues such as insufficient loading and inappropriate burst release kinetics have dogged progress into the clinic for small hydrophilic drugs such as 5-FU. This review provides introductory information about the mechanism of action, pharmacokinetic and physicochemical properties, and clinical use of 5-FU that have contributed to the development of PLGA-based 5-FU release platforms. In addition, this review provides information on fabrication methods used for a range of 5-FU-loaded PLGA formulations and discusses factors affecting the release kinetics of 5-FU as well as the in vitro and in vivo antitumor or antiproliferative efficacy of these platforms.

Hybrid nanofibers based on poly-caprolactone/gelatin/hydroxyapatite nanoparticles-loaded Doxycycline: Effective anti-tumoral and antibacterial activity

Cancer is one of the leading causes of morbidity and mortality Worldwide, 19.3 million new cancer cases are expected to be identified in 2025. Among the therapeutic arsenal to cancer control one could find the Doxycycline and the nano hydroxyapatite. The Doxycycline (Dox) not only shown antibiotic effect but also exhibits a wide range of pleiotropic therapeutic properties as the control of the invasive and metastatic cancer cells characteristics. The purpose of the present study was to evaluate both cytotoxicity in vitro and antibacterial activity of electrospun Dox-loaded hybrid nanofibrous scaffolds composed by hydroxyapatite nanoparticles (nHA), poly-ε-caprolactone (PCL) and gelatin (Gel) polymers. Both nHA and Dox were dispersed into different PCL/Gel ratios (70:30, 60:40, 50:50wt%) solutions to form electrospun nanofibers. The nHA and Dox/nHA/PCL-Gel hybrid nanofibers were characterized by TEM microscopy. In vitro Dox release behavior from all of these Dox-loaded nHA/PCL-Gel nanofibers showed the same burst release profile due to the high solubility of Gel in the release medium. Antibacterial properties of nanofiber composites were evaluated using Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Porphyromonas gingivalis (P. gingivalis) bacteria. The co-delivery of nHA particles and Dox simultaneously exhibited inhibition of bacterial growth more efficiently than the delivery of either Dox or nHA at the same concentrations, indicating a synergistic effect. The results showed that cancer cell tested had different sensibility to co-delivery system. On the whole, A-431 cells were found exhibited the most pronounced synergistic effect compared to CACO-2 and 4T1 cancer cells. Based on the anticancer as well as the antimicrobial results in this study, the developed Dox/nHA/PCL-Gel composite nanofibers are suitable as a drug delivery system with potential applications in the biomedical fields.

The Role of Titanium Surface Nanostructuring on Preosteoblast Morphology, Adhesion, and Migration

Surface structuring of titanium-based implants is known to modulate the behavior of adherent cells, but the influence of different nanotopographies is poorly understood. The aim is to investigate preosteoblast proliferation, adhesion, morphology, and migration on surfaces with similar surface chemistry but distinct nanotopographical features. Sonochemical treatment and anodic oxidation are employed to fabricate disordered, mesoporous titania (TMS) and ordered titania nanotubular (TNT) topographies on titanium, respectively. Morphological evaluation reveals that cells are polygonal and well-spread on TMS, but display an elongated, fibroblast-like morphology on TNT surfaces, while they are much flatter on glass. Both nanostructured surfaces impair cell adhesion, but TMS is more favorable for cell growth due to its support of cell attachment and spreading in contrast to TNT. A quantitative wound healing assay in combination with live-cell imaging reveals that cell migration on TMS surfaces has a more collective character than on other surfaces, probably due to a closer proximity between neighboring migrating cells on TMS. The results indicate distinctly different cell adhesion and migration on ordered and disordered titania nanotopographies, providing important information that can be used in optimizing titanium-based scaffold design to foster bone tissue growth and repair while allowing for the encapsulation of drugs into porous titania layer.

Engulfment of ceramic particles by fibroblasts does not alter cell behavior

Despite many studies, the impact of ceramic particles on cell behavior remains unclear. The aim of the present study was to investigate the effects of nano-sized ceramic particles on fibroblastic cells. Fibroblasts (dermal fibroblasts freshly isolated from skin samples and WI26 fibroblastic cells) were cultured in a monolayer in the presence of alumina or cerium-zirconia particles (≈50 nm diameter) at two concentrations (100 or 500 μg ml^-1). Fluorescent alumina particles were also used. The following properties were analyzed: cell morphology, cytoplasmic ceramic incorporation (using confocal and transmission electron microscopy) and migration (using a silicon insert). Sedimentation field-flow fractionation (SdFFF) was also used to evaluate the rate of incorporation of ceramic particles into the cells. Finally, after treatment with various concentrations of ceramic particles, fibroblasts were also included in a collagen type I lattice constituting a dermal equivalent (DE), and the collagen lattice retraction and cell proliferation were evaluated. In monolayer conditions, the presence of both alumina and cerium-zirconia ceramic particles did not cause any deleterious effects on cultured cells (dermal fibroblast and WI26 cells) and cell fate was not affected in any way by the presence of ceramic particles in the cytoplasm. Confocal (using fluorescent alumina particles) and electron microscopy (using both alumina and cerium-zirconia particles) showed that ceramic particles were internalized in the WI26 cells. Using fluorescent membrane labeling and fluorescent alumina particles, a membrane was observed around the particle-containing vesicles present in the cytoplasm. Electron microscopy on WI26 cells showed the presence of a classical bilayer membrane around the ceramic particles. Interestingly, SdFFF confirmed that some dermal fibroblasts contained many alumina ceramic particles while others contained very few; in WI26 cells, the uptake of alumina ceramic was more homogeneous. In DE, collagen lattice retraction and cell proliferation were unchanged when WI26 fibroblastic cells contained alumina or cerium-zirconia ceramic particles. Our data suggest that ceramic particles are internalized in the cells by endocytosis. The presence of ceramic particles in the cytoplasm has no affect on cell behavior, confirming the excellent biocompatibility of this material and anticipating a minimal harmful effect of potential wear debris.

Chitosan-PLGA polymer blends as coatings for hydroxyapatite nanoparticles and their effect on antimicrobial properties, osteoconductivity and regeneration of osseous tissues

Composite biomaterials comprising nanostructured hydroxyapatite (HAp) have an enormous potential for natural bone tissue reparation, filling and augmentation. Chitosan (Ch) as a naturally derived polymer has many physicochemical and biological properties that make it an attractive material for use in bone tissue engineering. On the other hand, poly-D,L-lactide-co-glycolide (PLGA) is a synthetic polymer with a long history of use in sustained drug delivery and tissue engineering. However, while chitosan can disrupt the cell membrane integrity and may induce blood thrombosis, PLGA releases acidic byproducts that may cause tissue inflammation and interfere with the healing process. One of the strategies to improve the biocompatibility of Ch and PLGA is to combine them with compounds that exhibit complementary properties. In this study we present the synthesis and characterization, as well as in vitro and in vivo analyses of a nanoparticulate form of HAp coated with two different polymeric systems: (a) Ch and (b) a Ch-PLGA polymer blend. Solvent/non-solvent precipitation and freeze-drying were used for synthesis and processing, respectively, whereas thermogravimetry coupled with mass spectrometry was used for phase identification purposes in the coating process. HAp/Ch composite particles exhibited the highest antimicrobial activity against all four microbial strains tested in this work, but after the reconstruction of the bone defect they also caused inflammatory reactions in the newly formed tissue where the defect had lain. Coating HAp with a polymeric blend composed of Ch and PLGA led to a decrease in the reactivity and antimicrobial activity of the composite particles, but also to an increase in the quality of the newly formed bone tissue in the reconstructed defect area.

The role of fetuin-A in mineral trafficking and deposition

Calcium and phosphate are the principle ions involved in the deposition of mineral in the human body. Inhibitors of mineralisation are essential for the prevention of ectopic mineral precipitation and deposition. In the past decade, through in vitro, in vivo and clinical observation studies, we have come to appreciate the importance of fetuin-A (Fet-A), a circulating glycoprotein, in preventing ectopic calcium phosphate mineralisation. Moreover, the detection of Fet-A-containing mineral complex, termed calciprotein particles (CPPs), has provided new ways to assess an individual's calcific risk. The pathophysiological significance of CPPs in disease states is yet to be defined, but it provides an exciting avenue to further our understanding of the development of ectopic mineralisation.