Nanoscale vibration could promote tenogenic differentiation of umbilical cord mesenchymal stem cells

Regulation of mesenchymal stem cell (MSC) fate for targeted cell therapy applications has been a subject of interest, particularly for tissues such as tendons that possess a marginal regenerative capacity. Control of MSCs' fate into the tendon-specific lineage has mainly been achieved by implementation of chemical growth factors. Mechanical stimuli or 3-dimensional (D) scaffolds have been used as an additional tool for the differentiation of MSCs into tenocytes, but oftentimes, they require a sophisticated bioreactor or a complex scaffold fabrication technique which reduces the feasibility of the proposed method to be used in practice. Here, we used nanovibration to induce the differentiation of MSCs toward the tenogenic fate solely by the use of nanovibration and without the need for growth factors or complex scaffolds. MSCs were cultured on 2D cell culture dishes that were connected to piezo ceramic arrays to apply nanovibration (30-80 nm and 1 kHz frequency) over 7 and 14 d. We observed that nanovibration resulted in significant overexpression of tendon-related markers in both gene expression and protein expression levels, while there was no significant differentiation into adipose and cartilage lineages. These findings could be of assistance in the mechanoregulation of MSCs for stem cell engineering and regenerative medicine applications.

Analysis of EMT induction in a non-invasive breast cancer cell line by mesenchymal stem cell supernatant: Study of 2D and 3D microfluidic based aggregate formation and migration ability, and cytoskeleton remodeling

AIMS

The process of Epithelial-to-mesenchymal transition (EMT) as a phenotypic invasive shift and the factors affecting it, are under extensive research. Application of supernatants of human adipose-derived mesenchymal stem cells (hADMSCs) on non-invasive cancer cells is a well known method of in vitro induction of EMT like process. While previous researches have focused on the effects of hADMSCs supernatant on the biochemical signaling pathways of the cells through expression of different proteins and genes, we investigated pro-carcinogic alterations of physico-mechanical cues in terms of changes in cell motility and aggregated formation in 3D microenvironments, and cytoskeletal actin-myosin content and fiber arrangement.

MAIN METHODS

MCF-7 cancer cells were treated by the supernatant from 48 hour-starved hADMSCs, and their vimentin/E-cadherin expressions were evaluated. The invasive potential of treated and non-treated cells was measured and compared through aggregate formation and migration capability. Furthermore, alterations in cell and nucleus morphologies were studied, and F-actin and myosin-II alterations in terms of content and arrangement were investigated.

KEY FINDINGS

Results indicated that application of hADMSCs supernatant enhanced vimentin expression as the biomarker of EMT, and induced pro-carcinogenic effects on non-invasive cancer cells through increased invasive potential by higher cell motility and reduced aggregate formation, rearrangement of actin structure and generation of more stress fibers, together with increased myosin II that lead to enhanced cell motility and traction force.

SIGNIFICANCE

Our results indicated that in vitro induction of EMT through mesenchymal supernatant influenced biophysical features of cancer cells through cytoskeletal remodeling that emphasizes the interconnection of chemical and physical signaling pathways during cancer progress and invasion. Results give a better insight to EMT as a biological process and the synergy between biochemical and biophysical parameters that contribute to this process, and eventually assist in improving cancer treatment strategies.

Effects of chemically EGFR targeting on non-targeted physical cell behaviors in 2D and 3D microfluidic cultures of invasive and non-invasive breast cancer cell lines

Cancer development comprehends changes in cell structural and physical states. Cancer cells are softer than normal cells, produce higher contractile forces, and migrate more easily. While chemotherapy, targets proteins involved in biological behaviors, it may affect cell physicomechanical state due to the interconnections among signaling pathways. Here we treated non-invasive and invasive breast cancer cell lines by targeting EGRF which modulates major biological behaviors. We quantified migration potential of cancer cells in a microfluidic device, and evaluated expression of proteins associated with physical behaviors. Results indicated significant alterations in physical behaviors, with a higher impact on invasive cells. The anti-cancer synergy between biological and physical behaviors was shown by decreasing actin, vinculin, and myosin II content and altered distribution, limiting cell invasion in 3D collagen structure, accompanied by decreasing cell viability and vimentin expression as the EMT biomarker. The center point of changes in physical behaviors was in cytoskeletal remodeling by chemical treatment, potentially through lower contractile force generation and less development of focal adhesions and stress fibers. The synergy between physical and chemical pathways can be used in enhancing anti-cancer drug efficacy.

The functional cross talk between cancer cells and cancer associated fibroblasts from a cancer mechanics perspective

The function of biological tissues in health and disease is regulated at cellular level and is highly influenced by the physical microenvironment, through the interaction of forces between cells and ECM, which are perceived through mechanosensing pathways. In cancer, both chemical and physical signaling cascades and their interactions are involved during cell-cell and cell-ECM communications to meet requirements of tumor growth. Among stroma cells, cancer associated fibroblasts (CAFs) play key role in tumor growth and pave the way for cancer cells to initiate metastasis and invasion to other tissues, and without recruitment of CAFs, the process of cancer invasion is dysfunctional. This is through an intense chemical and physical cross talks with tumor cells, and interactive remodeling of ECM. During such interaction CAFs apply traction forces and depending on the mechanical properties, deform ECM and in return receive physical signals from the micromechanical environment. Such interaction leads to ECM remodeling by manipulating ECM structure and its mechanical properties. The results are in form of deposition of extra fibers, stiffening, rearrangement and reorganization of fibrous structure, and degradation which are due to a complex secretion and expression of different markers triggered by mechanosensing of tumor cells, specially CAFs. Such events define cancer progress and invasion of cancer cells. A systemic knowledge of chemical and physical factors provides a holistic view of how cancer process and enhances the current treatment methods to provide more diversity among targets that involves tumor cells and ECM structure.

Chemical inhibitor anticancer drugs regulate mechanical properties and cytoskeletal structure of non-invasive and invasive breast cancer cell lines: Study of effects of Letrozole, Exemestane, and Everolimus

Regardless of their target and mechanism, anticancer drugs directly influence biological behavior of cancer cells by activating chemical signaling pathways. Due to the complex interaction between diverse signaling pathways, these drugs may profoundly impact the physical characteristics of cancer cells and regulate their mechanical properties. In this study, the effects of two Aromatase Inhibitor (Letrozole and Exemestane), and one mTOR Inhibitor (Everolimus) on cell mechanical properties, actin content/distribution, and nuclear areas of two invasive and non-invasive breast cancer cell line after 24 h treatment with concentrations previously reported were investigated. While metabolic activity of cell lines was highly affected by drug treatment, significant alterations in Young's modulus of cell bodies, nuclear areas, and actin content and distribution were reported with higher impact on invasive cells. It was concluded that regulation of mechanical behavior of cells by all three drugs emphasizes the cross talk between chemical and physical signaling cascades, and describes a correlation between biological and physical behaviors of cancer cells which might give an insight to a better understanding of mechanisms by which anti-cancer drugs function to enhance their performances.

Contribution of atherosclerotic plaque location and severity to the near-wall hemodynamics of the carotid bifurcation: an experimental study and FSI modeling

Atherosclerosis is initiated by endothelial injury that is related to abnormal values of hemodynamic parameters such as wall shear stress (WSS), oscillatory shear index (OSI) and stress phase angle (SPA), which are more common in arterial bifurcations due to the complex structure. An experimental model of human carotid bifurcation with accurate geometrical and mechanical features was set up, and using realistic pulsatile flow rates, the inlet and outlet pressure pulses were measured for normal and stenosed models with 40% and 80% severities at common carotid (CCA), internal carotid (ICA) and external carotid (ECA) arteries. Based on the obtained experimental data, fluid-structure models were developed to obtain WSS, OSI, and SPA and evaluate pathological consequences at different locations. Mild severity had minor impact, however, inducing severe 80% stenosis in each branch led to considerable localized changes of hemodynamic parameters both in the stenosis site and other locations. This included sharp increases in WSS values accompanied by very low values close to zero before and after the peaks. Severe stenosis not only caused significant changes in the local artery, but also in other branches. OSI and SPA were less sensitive to stenosis, although high peaks were observed on bifurcation site for the stenosis at ECA. The interconnection of arteries at carotid bifurcation results in altered pressure/flow patterns in all branches when a stenosis is applied in any site. Such effect confirms pathological findings that atherosclerotic plaques are observed simultaneously in different carotid branches, although with different degrees of plaque growth and severity.

Altered mechanical properties of actin fibers due to breast cancer invasion: parameter identification based on micropipette aspiration and multiscale tensegrity modeling

The biophysical properties of cells change with cancer invasion to fulfill their metastatic behavior. Cell softening induced by cancer is highly associated with alterations in cytoskeleton fibers. Changes in the mechanical properties of cytoskeletal fibers have not been quantified due to technical limitations. In this study, we used the micropipette aspiration technique to calculate and compare the viscoelastic properties of non-invasive and invasive breast cancer cells. We evaluated the mechanical properties of actin fibers and microtubules of two cancerous cell lines by using multiscale tensegrity modeling and an optimization method. Cancer invasion caused altered viscoelastic behavior of cells and the results of modeling showed changes in mechanical properties of major cytoskeleton fibers. The stiffness and viscosity constant of actin fibers in non-invasive cells were 1.28 and 2.27 times higher than those of the invasive cells, respectively. However, changes in mechanical properties of microtubules were minor. Immunofluorescent staining of fibers and their quantified distributions confirmed altered actin distribution among two cell lines, in contrast to microtubule distribution. This study highlights the function of cytoskeletal fibers in cancer progression, which could be of interest in designing therapeutic strategies to target cancer progress. Firstly, the viscoelastic behavior of non-invasive and invasive cells is examined with micropipette aspiration tests. A tensegrity model of cells is developed to mimic the viscoelastic behavior of cells, and tensegrity element stiffness is evaluated in an optimization procedure based on micropipette aspiration tests. Finally, by using immunofluorescent staining and confocal imaging, mechanical properties of actin filaments and microtubules of cancer cells are investigated during the course of metastasis.

Nonlinear viscoelastic properties of human dentin under uniaxial tension

OBJECTIVE

Dentin is a viscoelastic tissue that contributes to the load distribution in human teeth and leads to their fracture resistance. Despite previous researches on the time-dependent behavior of dentin, it is not very clear whether the viscoelastic behavior of this tissue is linear or nonlinear, and what viscoelastic constitutive equations mechanically characterize it. Therefore, the aim of this study was to describe the viscoelastic behavior of human dentin and determine the best-fitting viscoelastic model for this tissue.

METHODS

After preparation of human dentin specimens from 50 subjects, tensile stress relaxation tests were performed at 1%, 3%, 5% and 7% strain amplitudes. We first evaluated the viscoelastic linearity of this tissue and then fitted the experimental data using different constitutive models, namely, 2-, 3- and 4-term Prony series for linear viscoelasticity, Fung's quasilinear viscoelastic model, and also Schapery and modified superposition models for nonlinear viscoelasticity.

RESULTS

Despite an almost linear trend at small strains up to 5%, the relaxation rate generally depended on strain amplitude, indicating some degree of nonlinearity in dentine viscoelasticity. According to the results of data fitting using different models, the modified superposition formulation could best capture the viscoelastic behavior of human dentin.

SIGNIFICANCE

In this study, we have quantitatively examined the viscoelastic behavior of human dentin, using a large number of samples. We have obtained the coefficients of various viscoelastic formulations, which can be utilized in subsequent researches on human dentin assuming linear, quasilinear or nonlinear viscoelasticity for this tissue.

An AFM-Based Nanomechanical Study of Ovarian Tissues with Pathological Conditions

BACKGROUND

Different diseases affect both mechanical and chemical features of the involved tissue, enhancing the symptoms.

METHODS

In this study, using atomic force microscopy, we mechanically characterized human ovarian tissues with four distinct pathological conditions: mucinous, serous, and mature teratoma tumors, and non-tumorous endometriosis. Mechanical elasticity profiles were quantified and the resultant data were categorized using K-means clustering method, as well as fuzzy C-means, to evaluate elastic moduli of cellular and non-cellular parts of diseased tissues and compare them among four disease conditions. Samples were stained by hematoxylin-eosin staining to further study the content of different locations of tissues.

RESULTS

Pathological state vastly influenced the mechanical properties of the ovarian tissues. Significant alterations among elastic moduli of both cellular and non-cellular parts were observed. Mature teratoma tumors commonly composed of multiple cell types and heterogeneous ECM structure showed the widest range of elasticity profile and the stiffest average elastic modulus of 14 kPa. Samples of serous tumors were the softest tissues with elastic modulus of only 400 Pa for the cellular part and 5 kPa for the ECM. Tissues of other two diseases were closer in mechanical properties as mucinous tumors were insignificantly stiffer than endometriosis in cellular part, 1300 Pa compared to 1000 Pa, with the ECM average elastic modulus of 8 kPa for both.

CONCLUSION

The higher incidence of carcinoma out of teratoma and serous tumors may be related to the intense alteration of mechanical features of the cellular and the ECM, serving as a potential risk factor which necessitates further investigation.

[Steered Molecular Dynamics Simulation Study of Quantified Effects of Point Mutation Induced by Breast Cancer on Mechanical Behavior of E-Cadherin]

E-cadherin is a member of the cadherin family that plays a key role in the formation of cell-cell adhesion among epithelial tissues. Point mutations are one of the structural abnormalities of E-cadherin in human carcinomas. Such abnormalities can alter mechanical properties of proteins that play an important role in their biological activities. To determine the impact of point mutations on protein mechanical properties, the second fragment of extracellular domain of E-cadherin was modeled using steered molecular dynamics simulations. The molecular dynamics modeling included application of tensile forces in both constant velocity and constant force modes to examine the effects of Met282 to He and Asn315 to Ser mutations on mechanical behavior of protein structure. The stabilities of the wild type and mutant structures were also obtained by the protein design foldX algorithm. Results confirmed the lower stability of the mutant domains compared to the wild type. The mutated proteins displayed softer behavior than the reference protein and their stiffness decreased by up to 34%. Our findings suggest that local changes in molecular structure due to mutations may lead to noticeable alterations in mechanical properties within the entire domain. Since the function of protein is related to its structure, these changes may influence the function of the protein.

Substrate topography interacts with substrate stiffness and culture time to regulate mechanical properties and smooth muscle differentiation of mesenchymal stem cells

Substrate stiffness and topography are two powerful means by which mesenchymal stem cells (MSCs) activities can be modulated. The effects of substrate stiffness on the MSCs mechanical properties were investigated previously, however, the role of substrate topography in this regard is not yet well understood. Moreover, in vessel wall, these two physical cues act simultaneously to regulate cellular function, hence it is important to investigate their cooperative effects on cellular activity. Herein, we investigated the combined effects of substrate stiffness, substrate topography and culture time on the mechanical behavior of MSCs. The MSCs were cultured on the stiff and soft substrates with or without micro-grooved topography for 10 days and their viscoelastic properties and smooth muscle (SM) gene expression were investigated on days 2, 6 and 10. In general, substrate topography significantly interacted with substrate stiffness as well as culture time in the modulation of cell viscoelastic behavior and SM gene expression. The micro-grooved, stiff substrates resulted in the maximum cell stiffness and gene expression of α-actin and h1-calponin, and these values were detected to be minimum in the smooth, soft substrates. The findings can be helpful in the mechano-regulation of MSCs for vascular tissue engineering applications.

Effect of equiaxial cyclic strain on cardiomyogenic induction in mesenchymal stem cells

Differentiation of stem cells and functionality of target cells are regulated by microenvironmental stimuli to which the cells are exposed. Chemical agents such as growth factors and physical parameters including mechanical loadings are among major stimuli. In this study, equiaxial cyclic strain with two amplitudes was applied on rat adipose-derived mesenchymal stem cells (rAMSCs) with or without 5-azacytidine. The mRNA expression of cardiac-related genes was investigated through RT-PCR (polymerase chain reaction) method. Moreover, morphological features and the actin structure of the cells were studied. Results were indications of significant increase in mRNA expression among four target genes, which marked the increase in two principal cardiac markers of GATA4 and α-cardiac actin, and lesser increase in two other genes (NKX2-5, βMHC) in all experimental groups treated chemically and/or mechanically. Such effect was maximal when both treatments were applied describing the synergistic effect of combined stimuli. All treatments caused significant increase in cell area and cell shape index. The well spreading of cells was accompanied by enhanced actin structure, especially among samples subjected to mechanical stimulus. Both effects were among required features for functional muscle cells such as cardiac cells. It was concluded that the cyclic equiaxial strain enhanced cardiomyogenic induction among rat adipose-derived mesenchymal stem cells and such effect was strengthened when it was accompanied by application of chemical factor. Results can be considered among strategies for cardiomyogenic differentiation and can be employed in cardiac tissue engineering for production of functional cardiomyocytes to repair of damaged myocardium.

Progressive changes of elastic moduli of arterial wall and atherosclerotic plaque components during plaque development in human coronary arteries

Stiffness of the arterial wall and atherosclerotic plaque components is a determinant of the stress field within plaques, which has been suggested to be an indicator of plaque vulnerability. The diversity and inhomogeneous structure of atherosclerotic lesions complicate the characterization of plaque components. In the present study, stiffness of the arterial wall and atherosclerotic plaque components in human coronary arteries was examined in early and developed atherosclerotic lesions. The force-spectroscopy mode of the atomic force microscope and histological examination were used for determination of elastic moduli at specified locations within samples. Fibrous cap (E = 14.1 ± 3.8 kPa) showed lower stiffness than the fibrous tissue beneath the lipid pool (E = 17.6 ± 3.2 kPa). Calcification zones (E = 96.1 ± 18.8 kPa) and lipid pools (E = 2.7 ± 1.8 kPa) were the stiffest and softest components of atherosclerotic lesions, respectively. The increase of media stiffness (%44.8) and reduction of the elastic modulus of the internal elastic lamina (%28.9) was observed in coronary arteries. Moreover, significant differences were observed between the stiffness of medial layer in diseased parts and free-plaque segments in incomplete plaques of coronary arteries. Our results can be used for better understanding of remodeling mechanisms of the arterial wall with plaque development. Graphical abstract Stiffness alteration of the arterial wall and atherosclerotic plaque components with plaque development in coronary arteries.

Cytoskeletal remodeling induced by substrate rigidity regulates rheological behaviors in endothelial cells

Altered microenvrionmental mechanical cues induce cytoskeletal remodeling in cells and have a profound impact on their functions as well as rheological properties. This article is aimed to characterize the viscoelastic behavior of endothelial cells, cultivated on variably compliant substrates. Synthetic tunable poly(dimethylsyloxane) substrates, with elastic moduli ranging from 1.5 MPa to 3 kPa, were used to trigger cytoskeletal remodeling of endothelial cells, verified by morphological analysis and actin fluorescent labeling. Elasticity and stress relaxation tests were conducted using an AFM, resulting in a wide range of data. To account for this heterogeneity, fuzzy c-means clustering algorithm was applied to partition elastic data into biologically meaningful groups, representative of different regions in cells. Nanocharacterization of biomechanical properties, along with cytoskeletal studies, proved a significant correlation between substrate flexibility and viscoelasticity of the cells. Regardless of the viscoelastic model applied, increasing substrate rigidity was related to an overall increase in cell stiffness and apparent viscosity (2.95 ± 1.56 kPa and 921.45 ± 102.46 Pa.s for the stiff substrate; 2.17 ± 1.30 kPa and 557.37 ± 494.11 Pa.s for the intermediate substrate), associated with an organized actin cytoskeleton. Conversely, cells on soft substrate were more deformable (1.84 ± 1.3 kPa) and less viscous (327.13 ± 124.25 Pa.s), exhibiting an increased actin disorganization. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 71-80, 2019.

Behavioral remodeling of normal and cancerous epithelial cell lines with differing invasion potential induced by substrate elastic modulus

The micro-environment of cancer cells in the body is mechanically stiffer than that of normal cells. We cultured three breast cell lines of MCF10A-normal, MCF7-noninvasive, and MDA-MB-231-invasive on PDMS substrates with different elastic moduli and different cellular features were examined.Effects of substrate stiffness on cell behavior were evident among all cell lines. Cancerous cells were more sensitive to substrate stiffness for cell behaviors related to cell motility and migration which are necessary for invasion. The invasive cancerous cells were the most motile on substrates with moderate stiffness followed by non-invasive cancerous cells. Gene markers alterations were generally according to the analyzed cell movement parameters. Results suggest that alterations in matrix stiffness may be related to cancer disease and progression.

Mechanical Characterization of the Lamellar Structure of Human Abdominal Aorta in the Development of Atherosclerosis: An Atomic Force Microscopy Study

Atherosclerosis is a major risk factor for cardiovascular disease. However, mechanisms of interaction of atherosclerotic plaque development and local stiffness of the lamellar structure of the arterial wall are not well established. In the current study, the local Young's modulus of the wall and plaque components were determined for three different groups of healthy, mildly diseased and advanced atherosclerotic human abdominal aortas. Histological staining was performed to highlight the atherosclerotic plaque components and lamellar structure of the aortic media, consisting of concentric layers of elastin and interlamellar zones. The force spectroscopy mode of the atomic force microscopy was utilized to determine Young's moduli of aortic wall lamellae and plaque components at the micron level. The high variability of Young's moduli (E) at different locations of the atherosclerotic plaque such as the fibrous cap (E = 15.5± 2.6 kPa), calcification zone (E = 103.7±19.5 kPa), and lipid pool (E = 3.5±1.2 kPa) were observed. Reduction of elastin lamellae stiffness (18.6%), as well as stiffening of interlamellar zones (50%), were detected in the diseased portion of the medial layer of abdominal aortic wall compared to the healthy artery. Additionally, significant differences in the stiffness of both elastin lamellae and interlamellar zones were observed between the diseased wall and disease-free wall in incomplete plaques. Our results elucidate the alternation of the stiffness of different lamellae in the human abdominal aortic wall with atherosclerotic plaque development and may provide new insight on the remodeling of the aortic wall during the progression of atherosclerosis.

Morphology and contractile gene expression of adipose-derived mesenchymal stem cells in response to short-term cyclic uniaxial strain and TGF-β1

Previous studies have shown smooth muscle induction in adipose-derived mesenchymal stem cells (ASCs) caused by long-term cyclic stretch. Here we examined the capability of the short-term straining with time steps of 4, 8, 16 and 24 h alone or combined with TGF-β1on smooth muscle induction of rabbit ASCs. Alterations in cell morphology were quantified through the cell shape index and orientation angle, and expression levels of α-SMA,SM22-α,h-caldesmonandcalponin3markers were examined using the real-time polymerase chain reaction (PCR) method. Moreover, F-actin cytoskeleton organization was observed by fluorescence staining. Mechanical strain either alone or combined with growth factor treatment caused significant up-regulation of both early and intermediate smooth muscle cells (SMCs) specific markers during the initial hours of stimulation peaking in 8 to 16 h. Furthermore, gradual alignment of cells perpendicular to the strain direction during loading time, and cell elongation resembling contractile SMC phenotype, together with alignment and reorganization of F-actin fibers were observed. Considering previously reported protein up-regulation in following days of straining, the effects of short-term cyclic stretch on smooth muscle induction of ASCs were revealed which can be helpful in achieving functional contractile SMCs through synergistic mechano-chemical regulation of ASCs as an appealing cell source for vascular tissue engineering.

Radiation therapy affects the mechanical behavior of human umbilical vein endothelial cells

Radiation therapy has been widely utilized as an effective method to eliminate malignant tumors and cancerous cells. However, subjection of healthy tissues and the related networks of blood vessels adjacent to the tumor area to irradiation is inevitable. The aim of this study was to investigate the consequent effects of fractionation radiotherapy on the mechanical characteristics of human umbilical vein endothelial cells (HUVECs) through alterations in cytoskeleton organization and cell and nucleus morphology. In order to simulate the clinical condition of radiotherapy, the HUVECs were exposed to the specific dose of 2 Gy for 1-4 times among four groups with incremental total dose from 2 Gy up to 8 Gy. Fluorescence staining was performed to label F-actin filaments and nuclei. Micropipette aspiration and standard linear solid model were employed to evaluate the elastic and viscoelastic characteristics of the HUVECs. Radiotherapy significantly increased cell elastic moduli. Due to irradiation, instantaneous and equilibrium Young's modulus were also increased. Radiotherapy diminished HUVECs viscoelastic behavior and shifted their creep compliance curves downward. Furthermore, gamma irradiation elevated the nuclei sizes and to a lesser extent the cells sizes resulting in the accumulation of F-actin filaments within the rest of cell body. Endothelial stiffening correlates with endothelial dysfunction, hence the results may be helpful when the consequent effects of radiotherapy are the focus of concern.

Stress phase angle regulates differentiation of human adipose-derived stem cells toward endothelial phenotype

Endothelial cells are subjected to cyclic shear by pulsatile blood flow and pressures due to circumferential stresses. Although most of the researches on this topic have considered the effects of these two biomechanical forces separately or concurrently, few studies have noticed the interaction of these cyclic loadings on endothelial behavior. Negative temporal stress phase angle, defined by the phase lag between cyclic shear and tensile stresses, is an established parameter which is known to have substantial effects on blood vessel remodeling and progression of some serious cardiovascular diseases. In this research, intermittent shear and tensile stresses with different stress phase angle values were applied on human adipose stem cells (ASC). The expression level of three major endothelial-specific genes, elastic modulus of cells and cytoskeleton actin structure of cells were studied and compared among control and three test groups subjected to stress phase angle values at 0°, - 45°, and - 90°. Mechanical properties of ASCs were determined by atomic force microscopy and actin fiber structure was visualized by confocal imaging through Phalloidin staining. Results described a decrease in expression of FLK-1 and VE-cadherin and rise of vWF marker expression in case of higher negative stress phase angles. The Young's moduli of cells were significantly higher and cytoskeletal actin structure was more organized with higher thickness for all test samples subjected to combined stresses; however, these features were less magnificent for applied stress phase angles with higher negative values. The results confirmed significant effects of SPA on endothelial differentiation of mesenchymal stem cells.

Quantifying effects of cyclic stretch on cell-collagen substrate adhesiveness of vascular endothelial cells

Vascular endothelium is continuously subjected to mechanical stimulation in the form of shear forces due to blood flow as well as tensile forces as a consequence of blood pressure. Such stimuli influence endothelial behavior and regulate cell-tissue interaction for an optimized functionality. This study aimed to quantify influence of cyclic stretch on the adhesive property and stiffness of endothelial cells. The 10% cyclic stretch with frequency of 1 Hz was applied to a layer of endothelial cells cultured on a polydimethylsiloxane substrate. Cell-substrate adhesion of endothelial cells was examined by the novel approach of atomic force microscope-based single-cell force spectroscopy and cell stiffness was measured by atomic force microscopy. Furthermore, the adhesive molecular bonds were evaluated using modified Hertz contact theory. Our results show that overall adhesion of endothelial cells with substrate decreased after cyclic stretch while they became stiffer. Based on the experimental results and theoretical modeling, the decrease in the number of molecular bonds after cyclic stretch was quantified. In conclusion, in vitro cyclic stretch caused alterations in both adhesive capacity and elastic modulus of endothelial cells through mechanotransductive pathways as two major determinants of the function of these cells within the cardiovascular system.

Viscoelastic Properties of Human Tracheal Tissues

The physiological performance of trachea is highly dependent on its mechanical behavior, and therefore, the mechanical properties of its components. Mechanical characterization of trachea is key to succeed in new treatments such as tissue engineering, which requires the utilization of scaffolds which are mechanically compatible with the native human trachea. In this study, after isolating human trachea samples from brain-dead cases and proper storage, we assessed the viscoelastic properties of tracheal cartilage, smooth muscle, and connective tissue based on stress relaxation tests (at 5% and 10% strains for cartilage and 20%, 30%, and 40% for smooth muscle and connective tissue). After investigation of viscoelastic linearity, constitutive models including Prony series for linear viscoelasticity and quasi-linear viscoelastic, modified superposition, and Schapery models for nonlinear viscoelasticity were fitted to the experimental data to find the best model for each tissue. We also investigated the effect of age on the viscoelastic behavior of tracheal tissues. Based on the results, all three tissues exhibited a (nonsignificant) decrease in relaxation rate with increasing the strain, indicating viscoelastic nonlinearity which was most evident for cartilage and with the least effect for connective tissue. The three-term Prony model was selected for describing the linear viscoelasticity. Among different models, the modified superposition model was best able to capture the relaxation behavior of the three tracheal components. We observed a general (but not significant) stiffening of tracheal cartilage and connective tissue with aging. No change in the stress relaxation percentage with aging was observed. The results of this study may be useful in the design and fabrication of tracheal tissue engineering scaffolds.

Cyclic Stretch Effects on Adipose-Derived Stem Cell Stiffness, Morphology and Smooth Muscle Cell Gene Expression

Recent investigations consider adipose-derived stem cells (ASCs) as a promising source of stem cells for clinical therapies. To obtain functional cells with enhanced cytoskeleton and aligned structure, mechanical stimuli are utilized during differentiation of stem cells to the target cells. Since function of muscle cells is associated with cytoskeleton, enhanced structure is especially essential for these cells when employed in tissue engineering. In this study by utilizing a custom-made device, effects of uniaxial tension (1Hz, 10% stretch) on cytoskeleton, cell alignment, cell elastic properties, and expression of smooth muscle cell (SMC) genes in ASCs are investigated. Due to proper availability of ASCs, results can be employed in cardiovascular engineering when production of functional SMCs in arterial reconstruction is required. Results demonstrated that cells were oriented after 24 hours of cyclic stretch with aligned pseudo-podia. Staining of actin filaments confirmed enhanced polymerization and alignment of stress fibers. Such phenomenon resulted in stiffening of cell body which was quantified by atomic force microscopy (AFM). Expression of SM α-actin and SM22 α-actin as SMC associated genes were increased after cyclic stretch while GAPDH was considered as internal control gene. Finally, it was concluded that application of cyclic stretch on ASCs assists differentiation to SMC and enhances functionality of cells.

Fabrication of Chitosan Silk-based Tracheal Scaffold Using Freeze-Casting Method

Background

Since the treatments of long tracheal lesions are associated with some limitations, tissue engineered trachea is considered as an alternative option. This study aimed at preparing a composite scaffold, based on natural and synthetic materials for tracheal tissue engineering.

Methods

Nine chitosan silk-based scaffolds were fabricated using three freezing rates (0.5, 1, and 2°C/min) and glutaraldehyde (GA) concentrations (0, 0.4, and 0.8 wt%). Samples were characterized, and scaffolds having mechanical properties compatible with those of human trachea and proper biodegradability were selected for chondrocyte cell seeding and subsequent biological assessments.

Results

The pore sizes were highly influenced by the freezing rate and varied from 135.3×372.1 to 37.8×83.4 µm. Swelling and biodegradability behaviors were more affected by GA rather than freezing rate. Tensile strength raised from 120 kPa to 350 kPa by an increment of freezing rate and GA concentration. In addition, marked stiffening was demonstrated by increasing elastic modulus from 1.5 MPa to 12.2 MPa. Samples having 1 and 2°C/min of freezing rate and 0.8 wt% GA concentration made a non-toxic, porous structure with tensile strength and elastic modulus in the range of human trachea, facilitating the chondrocyte proliferation. The results of 21-day cell culture indicated that glycosaminoglycans content was significantly higher for the rate of 2°C/min (12.04 µg/min) rather than the other (9.6 µg/min).

Conclusion

A homogenous porous structure was created by freeze drying. This allows the fabrication of a chitosan silk scaffold cross-linked by GA for cartilage tissue regeneration with application in tracheal regeneration.

Time dependency of morphological remodeling of endothelial cells in response to substrate stiffness

Introduction: Substrate stiffness regulates cellular behavior as cells experience different stiffness values of tissues in the body. For example, endothelial cells (ECs) covering the inner layer of blood vessels are exposed to different stiffness values due to various pathologic and physiologic conditions. Despite numerous studies, cells by time span sense mechanical properties of the substrate, but the response is not well understood. We hypothesized that time is a major determinant influencing the behavior of cells seeded on substrates of varying stiffness. Methods: We monitored cell spreading, internal structure, 3D topography, and the viability of ECs over 24 hours of culture on polydimethylsiloxane (PDMS) substrates with two different degrees of elastic modulus. Results: Despite significant differences in cell spreading after cell seeding, cells showed a similar shape and internal structure after 24 hours of culture on both soft and stiff substrates. However, 3D topographical images confirmed existence of rich lamellipodia and filopodia around the cells cultured on stiffer PDMS substrates. Conclusion: It was concluded that the response of ECs to the substrate stiffness was time dependent with initial enhanced cellular spreading and viability on stiffer substrates. Results can provide a better comprehension of cell mechanotransduction for tissue engineering applications.

Regulation of Endothelial Cell Adherence and Elastic Modulus by Substrate Stiffness

Although substrate stiffness has been previously reported to affect various cellular aspects, such as morphology, migration, viability, growth, and cytoskeletal structure, its influence on cell adherence has not been well examined. Here, we prepared three soft, medium, and hard polyacrylamide (PAAM) substrates and utilized AFM to study substrate elasticity and also the adhesion and mechanical properties of endothelial cells in response to changing substrate stiffness. Maximum detachment force and cell stiffness were increased with increasing substrate stiffness. Maximum detachment force values were 0.28 ± 0.14, 0.94 ± 0.27, and 1.99 ± 0.59 nN while Young's moduli of cells were 218.85 ± 38.73, 385.58 ± 131.67, and 933.20 ± 428.92 Pa for soft, medium, and hard substrates, respectively. Human umbilical vein endothelial cells (HUVECs) showed round to more spread shapes on soft to hard substrates, with the most organized and elongated actin structure on the hard hydrogel. Our results confirm the importance of substrate stiffness in regulating cell mechanics and adhesion for a successful cell therapy.

Stepwise morphological changes and cytoskeletal reorganization of human mesenchymal stem cells treated by short-time cyclic uniaxial stretch

This study aimed to investigate stepwise remodeling of human mesenchymal stem cells (hMSCs) in response to cyclic stretch through rearrangement and alignment of cells and cytoskeleton regulation toward smooth muscle cell (SMC) fate in different time spans. Image analysis techniques were utilized to calculate morphological parameters. Cytoskeletal reorganization was observed by investigating F-actin filaments using immunofluorescence staining, and expression level of contractile SMC markers was followed by a quantitative polymerase chain reaction method. Applying cyclic uniaxial stretch on cultured hMSCs, utilizing a costume-made device, led to alteration in fractal dimension (FD) and cytoskeleton structure toward continuous alignment and elongation of cells by elevation of strain duration. Actin filaments became more aligned perpendicular to the axis of mechanical stretch by increasing uniaxial loading duration. At first, FD met a significant decrease in 4 h loading duration then increased significantly by further loading up to 16 h, followed by another decrease up to 1 d of uniaxial stretching. HMSCs subjected to 24 h cyclic uniaxial stretching significantly expressed early and intermediate contractile SM markers. It was hypothesized that the increase in FD after 4 h while cells continuously became more aligned and elongated was due to initiation of change in phenotype that influenced arrangement of cells. At this point, change in cell phenotype started leading to change in morphology while mechanical loading still caused cell alignment and rearrangement. Results can be helpful when optimized engineered cells are needed based on mechanical condition for functional engineered tissue and cell therapy.

Investigation of the Mechanical Properties of the Human Tracheal Cartilage

BACKGROUND

The tracheal cartilage plays an important role in maintaining the mechanical stability of the trachea, as it keeps the trachea open and prevents its collapse under the negative pressures of the respiratory cycle. This study aimed to evaluate and compare the mechanical properties of cartilage specimens from the cranial and caudal regions of the human trachea and compare the results with respect to age and sex of the subjects.

MATERIALS AND METHODS

After obtaining human trachea samples from brain-dead, organ-donating patients and storing them in appropriate conditions, the prepared cartilage samples from the cranial and caudal regions of the trachea were subjected to uniaxial tension and stress relaxation experiments to obtain the corresponding Young's modulus and relaxation percentage values, respectively. The results were compared in terms of the position (cranial or caudal) in the trachea, and age and sex of the patients.

RESULTS

Based on the results, no statistically significant effect of the position in the trachea on the Young's modulus of the human tracheal cartilage samples was observed, despite the generally stiffer behavior of cartilage samples from the cranial region compared to those from the caudal region of the trachea. For both the cranial and caudal regions, no significant effect of sex on the stiffness of the tracheal cartilage was observed; further, the cartilage samples of the human trachea (from both cranial and caudal regions) of the old subjects were significantly stiffer than those of the young subjects. Based on the stress relaxation data, no significant effect of age, sex, or position on the relaxation percentage was observed.

CONCLUSION

The tracheal cartilage samples of the old patients are significantly stiffer than those of the young patients. Sex and position in the trachea (cranial vs caudal) do not significantly influence the mechanical properties of the human tracheal cartilage samples. The results of this study can be useful in designing tracheal tissue-engineered scaffolds, which should be mechanically compatible with the native trachea.

Characterization of mechanical properties of lamellar structure of the aortic wall: Effect of aging

Arterial wall tissues are sensitive to their mechanical surroundings and remodel their structure and mechanical properties when subjected to mechanical stimuli such as increased arterial pressure. Such remodeling is evident in hypertension and aging. Aging is characterized by stiffening of the artery wall which is assigned to disturbed elastin function and increased collagen content. To better understand and provide new insight on microstructural changes induced by aging, the lamellar model of the aortic media was utilized to characterize and compare wall structure and mechanical behavior of the young and old human thoracic aortic samples. Such model regards arterial media as two sets of alternating concentric layers, namely sheets of elastin and interlamellar layers. Histological and biaxial tests were performed and microstructural features and stress-strain curves of media were evaluated in young and old age groups. Then using optimization algorithms and hyperelastic constitutive equations the stress-strain curves of layers were evaluated for both age groups. Results indicated slight elevation in the volume fraction of interlamellar layer among old subjects most probably due to age related collagen deposition. Aging indicated substantial stiffening of interlamellar layers accompanied by noticeable softening of elastic lamellae. The general significant stiffening of old samples were attributed to both increase of volume fraction of interlamellar layers and earlier recruitment of collagen fibers during load bearing due to functional loss of elastin within wall lamellae. Mechanical characterization of lamellar structure of wall media is beneficial in study of arterial remodeling in response to alternated mechanical environment in aging and clinical conditions through coupling of wall microstructure and mechanical behavior.

Effects of uniaxial cyclic stretch loading on morphology of adipose derived stem cells

Adipose derived stem cells (ADSC) are good candidates for the replacement of bone marrow derived mesenchymal stem cells due to their abundance, multipotency property, and easier accessibility. In order to explore the behavior of these cells in response to mechanical stimulation, in this study we have investigated the effects of uniaxial dynamic mechanical loading on ADSC's morphology. Stem cells derived from the fat tissue of human and after an overnight culture were seeded on a silicone rubber strips. Afterwards, cells were subjected to a uniaxial dynamic loading in three different groups. Cell images were evaluated considering different morphological parameters. Fractal dimension decreased significantly after loading while in control groups there were a significant increase (p<0.05), approving that cyclic strain would lead to more aligned and organized cells. Cell orientation also increased significantly (p<0.05). Moreover cells' orientation angle, 24 hour after loading does not change compared to the observations immediately after loading, which attests to the practicality of the cyclic strain in functional tissue engineering. Cell width decreased and cell length increased which led to a significant increase in cell shape index (p<0.05). Results confirmed that uniaxial dynamic loading affects cell morphological parameters comparing their values before and after loading. In addition, the number of cycles are also an important factor since different number of cycles lead to different amounts of certain morphological parameters. Conclusively, cyclic strain can be a practical method in the field of functional tissue engineering.

Mechanical Characterization and Constitutive Modeling of Human Trachea: Age and Gender Dependency

Tracheal disorders can usually reduce the free lumen diameter or wall stiffness, and hence limit airflow. Trachea tissue engineering seems a promising treatment for such disorders. The required mechanical compatibility of the prepared scaffold with native trachea necessitates investigation of the mechanical behavior of the human trachea. This study aimed at mechanical characterization of human tracheas and comparing the results based on age and gender. After isolating 30 human tracheas, samples of tracheal cartilage, smooth muscle, and connective tissue were subjected to uniaxial tension to obtain force-displacement curves and calculate stress-stretch data. Among several models, the Yeoh and Mooney-Rivlin hyperelastic functions were best able to describe hyperelastic behavior of all three tracheal components. The mean value of the elastic modulus of human tracheal cartilage was calculated to be 16.92 ± 8.76 MPa. An overall tracheal stiffening with age was observed, with the most considerable difference in the case of cartilage. Consistently, we noticed some histological alterations in cartilage and connective tissue with aging, which may play a role in age-related tracheal stiffening. No considerable effect of gender on the mechanical behavior of tracheal components was observed. The results of this study can be applied in the design and fabrication of trachea tissue engineering scaffolds.

Evaluation of mechanical properties of human mesenchymal stem cells during differentiation to smooth muscle cells

Human mesenchymal stem cells (hMSCs) are multipotent cells appropriate for a variety of tissue engineering and cell therapy applications. Mechanical properties of hMSCs during differentiation are associated with their particular metabolic activity and regulate cell function due to alternations in cytoskeleton and structural elements. The objective of this study is to evaluate elastic and viscoelastic properties of hMSCs during long term cultivation in control and transforming growth factor-β1 treatment groups using micropipette aspiration technique. The mean Young's modulus (E) of the control samples remained nearly unchanged during 6 days of cultivation, but that of the test samples showed an initial reduction compared to its relevant control sample after 2 days of treatment by biological growth factor, followed by a significant rise after 4 and 6 days. The viscoelastic creep tests showed that both instantaneous and equilibrium moduli significantly increased with the treatment time and reached to maximum values of 622.9 ± 114.2 and 144.3 ± 11.6 Pa at the sixth day, respectively, while increase in apparent viscosity was not statistically significant. Such change of mechanical properties of hMSCs during specific lineage commitment contributes to regenerative medicine as well as stem-cell-based therapy in which biophysical signals regulate stem cell fate.

Intermittent hydrostatic pressure enhances growth factor-induced chondroinduction of human adipose-derived mesenchymal stem cells

Hydrostatic pressure (HP) plays an essential role in regulating function of chondrocytes and chondrogenic differentiation. The objective of this study was to examine effects of intermittent HP on chondrogenic differentiation of human adipose-derived mesenchymal stem cells (hASCs) in the presence or absence of chemical chondrogenic medium. Cells were isolated from abdominal fat tissue and confirmed for expression of ASC surface proteins and differentiation potential. Passage 3 pellets were treated with chemical (growth factor), mechanical (HP of 5 MPa and 0.5 Hz with duration of 4 h/day for 7 consecutive days), and combined chemical-mechanical stimuli. Using real-time polymerase chain reaction, the expression of Sox9, collagen II, and aggrecan as three major chondrogenic markers were quantified among three experimental groups and compared to those of stem cells and human cartilage tissue. In comparison to the chemical and mechanical groups, the chemical-mechanical group showed the highest expression for all three chondrogenic genes close to that of cartilage tissue. Results show the beneficial role of intermittent HP on chondrogenic differentiation of hASCs, and that this loading regime in combination with chondrogenic medium can be used in cartilage tissue engineering.

Model of cholera dissemination using geographic information systems and fuzzy clustering means: case study, Chabahar, Iran

OBJECTIVES

Cholera is spread by drinking water or eating food that is contaminated by bacteria, and is related to climate changes. Several epidemics have occurred in Iran, the most recent of which was in 2005 with 1133 cases and 12 deaths. This study investigated the incidence of cholera over a 10-year period in Chabahar district, a region with one of the highest incidence rates of cholera in Iran.

STUDY DESIGN

Descriptive retrospective study on data of patients with Eltor and NAG cholera reported to the Iranian Centre of Disease Control between 1997 and 2006.

METHODS

Data on the prevalence of cholera were gathered through a surveillance system, and a spatial database was developed using geographic information systems (GIS) to describe the relation of spatial and climate variables to cholera incidences. Fuzzy clustering (fuzzy C) method and statistical analysis based on logistic regression were used to develop a model of cholera dissemination. The variables were demographic characteristics, specifications of cholera infection, climate conditions and some geographical parameters.

RESULTS

The incidence of cholera was found to be significantly related to higher temperature and humidity, lower precipitation, shorter distance to the eastern border of Iran and local health centres, and longer distance to the district health centre. The fuzzy C means algorithm showed that clusters were geographically distributed in distinct regions.

CONCLUSION

In order to plan, manage and monitor any public health programme, GIS provide ideal platforms for the convergence of disease-specific information, analysis and computation of new data for statistical analysis.

The effects of stenosis severity on the hemodynamic parameters-assessment of the correlation between stress phase angle and wall shear stress

To study the effects of increase in the degree of stenosis severity and subsequent complexity of hemodynamic patterns on hemodynamic parameters, experimental investigations and numerical simulations were performed. The correlations between the large negative Stress Phase Angle (SPA), the low mean Wall Shear Stress (WSS) and high Oscillatory Shear Index (OSI) were investigated at the distal shoulder and post-stenotic regions as the outcomes of elevated stenosis severity. Models included non-Newtonian fluid flow in stenotic arteries with 30-80% symmetrical stenoses. To study the interactions between pulsatile WSS and pulsatile wall circumferential stress (WCS) acting on endothelial cells, SPA as the phase difference between WSS and WCS waves was used. Moreover, the distribution of SPA on the lumen axis was compared to the distributions of the mean WSS and OSI that have been regarded until now as the determinants of atherosclerosis-prone regions. Results indicate that an increase in stenosis severity, not only affects the mean WSS, mean WCS and pulse amplitudes, but also influences the phase difference between them. The SPA is large negative on the distal shoulder and post-stenotic areas where atherosclerotic plaque develops. The increasing stenosis severity and the subsequent increasing complexity of hemodynamic patterns affect the correlation between any of the low mean WSS and high OSI with large negative SPA, such that it not only leads to create and develop some regions where the correlation between any of the low mean WSS and high OSI with large negative SPA is well but also leads to create and develop other regions where such correlations fail.

Residual stress distribution in a lamellar model of the arterial wall

Excessive wall circumferential stress in arteries caused by luminal pressure leads to endothelial damage and clinical consequences. In addition to circumferential stress, arterial wall contains residual stress with compressive and tensile components on intima and adventitia sides. The intimal compressive component compensates part of tensile stress induced by blood pressure, hence reduces severity of endothelial tension. The opening angle caused by radial cut of arterial ring defines residual stress. In this study, finite element modelling is used to evaluate residual stress in a lamellar model of human aorta with differing opening angle and elastic modulus. Results show non-linear residual stress profiles across wall thickness, influenced by structural and mechanical parameters. Elevation of opening angle from 50° to 90° leads to increase of intimal compressive component compensating up to 32.6% of the pressure-induced tensile stress. Results may be applied in study of endothelial injury caused by excessive stress in situations such as aging, hypertension and atherosclerosis.

Coupled fluid-wall modelling of steady flow in stenotic carotid arteries

Arterial stenoses may cause critical blood flow and wall conditions leading to clinical complications. In this paper computational models of stenotic carotid arteries are proposed and the vessel wall collapse phenomenon is studied. The models are based on fluid-structure interactions (FSI) between blood and the arterial walls. Coupled finite element and computational fluid dynamics methods are used to simultaneously solve for stress and displacement in the solid, and for pressure, velocity and shear stress in the fluid domain. Results show high wall shear stress at the stenosis throat and low (negative) values accompanied by disturbed flow patterns downstream of the stenosis. The wall circumferential stress varies abruptly from tensile to compressive along the stenosis with high stress concentration on the plaque shoulders showing regions of possible plaque rupture. Wall compression and collapse are observed for severe cases. Post-stenotic collapse of the arterial wall occurs for stenotic severity as low as 50%, with the assumption that a given amount of blood flow needs to pass the stenotic artery; whereas if constant pressure drop should be maintained across a constriction, then collapse happens at severity of 75% and above. The former assumption is based on the requirement of adequate blood supply to the downstream organs/tissue, while the latter stems from the fact that the pumping mechanism of the body has a limited capacity in regulating blood pressure, in case a stenosis appears in the vasculature.

Effects of cyclic stretch waveform on endothelial cell morphology using fractal analysis

Endothelial cells are remodeled when subjected to cyclic loading. Previous in vitro studies have indicated that frequency, strain amplitude, and duration are determinants of endothelial cell morphology, when cells are subjected to cyclic strain. In addition to those parameters, the current study investigated the effects of strain waveform on morphology of cultured endothelial cells quantified by fractal and topological analyses. Cultured endothelial cells were subjected to cyclic stretch by a designed device, and cellular images before and after tests were obtained. Fractal and topological parameters were calculated by development of an image-processing code. Tests were performed for different load waveforms. Results indicated cellular alignment by application of cyclic stretch. By alteration of load waveform, statistically significant differences between cell morphology of test groups were observed. Such differences are more prominent when load cycles are elevated. The endothelial cell remodeling was optimized when the applied cyclic load waveform was similar to blood pressure waveform. Effects of load waveform on cell morphology are influenced by alterations in load amplitude and frequency. It is concluded that load waveform is a determinant of endothelial morphology in addition to amplitude and frequency, and such effect is elevated by increase of load cycles. Due to high correlation between fractal and topological analyses, it is recommended that fractal analysis can be used as a proper method for evaluation of alteration in cell morphology and tissue structure caused by application of external stimuli such as mechanical loading.

Topological remodeling of cultured endothelial cells by characterized cyclic strains

Evaluation of mechanical environment on cellular function is a major field of study in cellular engineering. Endothelial cells lining the entire vascular lumen are subjected to pulsatile blood pressure and flow. Mechanical stresses caused by such forces determine function of arteries and their remodeling. Critical values of mechanical stresses contribute to endothelial damage, plaque formation and atherosclerosis. A device to impose cyclic strain on cultured cells inside an incubator was designed and manufactured operating with different load amplitudes, frequencies, numbers of cycles and ratios of extension to relaxation. Endothelial cells cultured on collagen coated silicon scaffolds were subjected to cyclic loading. Effects of mechanical loading on cell morphology were quantified using image processing methods. Results showed change in cell orientation from a randomly oriented before the test up to 80 degrees alignment from load axis after loading. Endothelial cells were elongated with shape index reductions up to 47% after cyclic stretch. By increase of strain amplitude, loading frequency and number of cycles, significant decrease in shape index and significant increase in orientation angle were observed. Change of load waveform similar to arterial pulse pressure waveform resulted in alteration of cell alignment with 9.7% decrease in shape index, and 10.8% increase in orientation angle. Results of cyclic loading tests in a disturbed environment with elevated PH showed lack of remodeling. It was concluded that tensile loading of endothelial cells influences cell morphology and alignment, a mechanism for structural regulation, functional adaptation and remodeling. Disturbed environment results in endothelial dysfunction and injury.