Ultrasound Manipulation and Extrusion of Active Nanorods

Synthetic self-propelled nano and microparticles have a growing appeal for targeted drug delivery, collective functionality, and manipulation at the nanoscale. However, it is challenging to control their positions and orientations under confinement, e.g., in microchannels, nozzles, and microcapillaries. This study reports on the synergistic effect of acoustic and flow-induced focusing in microfluidic nozzles. In a microchannel with a nozzle, the balance between the acoustophoretic forces and the fluid drag due to streaming flows generated by the acoustic field controls the microparticle's dynamics. This study manipulates the positions and orientations of dispersed particles and dense clusters inside the channel at a fixed frequency by tuning the acoustic intensity. The main findings are: first, this study successfully manipulates the positions and orientations of individual particles and dense clusters inside the channel at a fixed frequency by tuning the acoustic intensity. Second, when an external flow is applied, the acoustic field separates and selectively extrudes shape-anisotropic passive particles and self-propelled active nanorods. Finally, the observed phenomena are explained by multiphysics finite-element modeling. The results shed light on the control and extrusion of active particles in confined geometries and enable applications for acoustic cargo (e.g., drug) delivery, particle injection, and additive manufacturing via printed self-propelled active particles.

Hooded broadcast sprayer for particle drift reduction

BACKGROUND

There is renewed interest amongst crop protection professionals and regulators in the adoption of spray hoods to further reduce pesticide off-target movement during applications. Although the benefits of sprayer hoods have been reported since the early 1950s, adoption has been relatively low among farmers and applicators. The objective of this study was to evaluate the effectiveness of spray hoods in reducing pesticide drift of spray solutions from nozzles typically used for herbicide applications in row crops with tolerance to dicamba or 2,4-D.

RESULTS

Hooded applications substantially reduced spray drift potential across all treatment scenarios compared to conventional applications. Hooded applications using the AIXR nozzle without drift-reducing adjuvant (DRA) had a similar area under the drift curve (31.5) compared to conventional applications (open sprayer) using the TTI nozzle with DRA (27.7), despite the major droplet size differences between these treatments (D_V50  = 447.5 and 985 μm, respectively).

CONCLUSION

These results indicate that the adoption of spray hoods combined with proper nozzle selection, and the use of DRAs can substantially reduce spray drift potential during pesticide applications. The use of this technology can be complementary to other drift-reducing technologies. © 2021 Society of Chemical Industry.

Toward a new method to classify the airblast sprayers according to their potential drift reduction: comparison of direct and new indirect measurement methods

BACKGROUND

Drift is one of the most important issues to consider for realising sustainable pesticide sprays. This study proposes an alternative indirect methodology for comparative measurements of drift reduction potential (DRP) generated by airblast sprayers, aimed at overcoming the practical inconveniences and drawbacks of standardized ISO 22866:2005. A test bench in the absence of target crop and wind was employed to measure drift potential values (DPVs). A variation to the proposed method that introduced a crop between sprayer and test bench device was considered to study the canopy effect (absence/presence) and to validate the method. In parallel, direct spray drift measurements (ISO 22866) were performed to obtain the drift value (DV). A representative vineyard airblast sprayer was evaluated in four configurations (a combination of two fan airflow rates and two nozzle types). The configurations tested under the three methods (direct and indirects) were classified according to achieved drift reduction percentages (ISO 22369-1:2013) and compared.

RESULTS

Indirect methods discriminated DPVs from different nozzles (conventional, air induction) and fan airflow rate (high, low) combinations. Indirect methods also showed that despite crop influence on drift amount, target absence has a negligible effect when used specifically for DRP determination/classification. In fact, identical DRP final classifications were achieved for the two methodologies tested. Alternatively, all tested configurations resulted in lower DR values following the ISO 22866 field method, which caused different final classifications due to the high dependence of results on external factors.

CONCLUSIONS

The alternative test bench methodology, characterized by the absence of target crop and calm of wind, was considered feasible for comparative measurements of airblast sprayer DRP. © 2019 Society of Chemical Industry.

Laser Cutting: A Review on the Influence of Assist Gas

Assist gas plays a central role in laser fusion cutting. In this work, the aerodynamic interactions between the assist gas and the workpiece are reviewed. An insight into those phenomena that hinder the cutting quality and performance is provided. These phenomena include shock waves, choking, boundary layer separation, etc. The most relevant and promising attempts to overcome these common problems related to the gas dynamics are surveyed. The review of the current scientific literature has revealed some gaps in the current knowledge of the role of the assist gas dynamics in laser cutting. The assist gas interactions have been investigated only under static conditions; and the dynamic interaction with the molten material on the cutting front has not been addressed. New nozzle designs with improved efficiency of molten material removal are required to improve cut quality; and cutting speed in current industrial laser cutting machines; especially in those assisted by new high-brightness laser sources.

Efficacy of using oxygen microbubble device for facultative anaerobe removal

Patients with serious gingivitis or periodontal diseases suffer from receding gums. Brushing teeth with a toothbrush may result in bleeding gums and new wounds, which increases the difficulty of removing facultative anaerobes from gum pockets, to decrease the damage inflicted on gums, this study proposed a cleaning device that can generate and emit oxygen microbubbles for eliminating facultative anaerobes in the mouth cavity. In this study, the authors conducted simulations with a denture to investigate the efficacy of using this method to remove facultative anaerobes. In this research for the optimal device design, several variables were manipulated including rotation speeds of the bubble generator, different nozzle diameters, and different numbers of nozzle holes. The results revealed that the device is effective in removing facultative anaerobes; moreover, of all design variables, the number of nozzle holes was the factor having the largest effect on anaerobe removal, as it influenced the flow volume and oxygen content of the discharge: the greater the number of nozzles, the greater the flow volume, oxygen content, and efficacy of anaerobe removal.

Compressed air noise reductions from using advanced air gun nozzles in research and development environments

The aims of this study were to evaluate sound levels produced by compressed air guns in research and development (R&D) environments, replace conventional air gun models with advanced noise-reducing air nozzles, and measure changes in sound levels to assess the effectiveness of the advanced nozzles as engineering controls for noise. Ten different R&D manufacturing areas that used compressed air guns were identified and included in the study. A-weighted sound level and Z-weighted octave band measurements were taken simultaneously using a single instrument. In each area, three sets of measurements, each lasting for 20 sec, were taken 1 m away and perpendicular to the air stream of the conventional air gun while a worker simulated typical air gun work use. Two different advanced noise-reducing air nozzles were then installed. Sound level and octave band data were collected for each of these nozzles using the same methods as for the original air guns. Both of the advanced nozzles provided sound level reductions of about 7 dBA, on average. The highest noise reductions measured were 17.2 dBA for one model and 17.7 dBA for the other. In two areas, the advanced nozzles yielded no sound level reduction, or they produced small increases in sound level. The octave band data showed strong similarities in sound level among all air gun nozzles within the 10-1,000 Hz frequency range. However, the advanced air nozzles generally had lower noise contributions in the 1,000-20,000 Hz range. The observed decreases at these higher frequencies caused the overall sound level reductions that were measured. Installing new advanced noise-reducing air nozzles can provide large sound level reductions in comparison to existing conventional nozzles, which has direct benefit for hearing conservation efforts.

Determining the drift potential of Venturi nozzles compared with standard nozzles across three insecticide spray solutions in a wind tunnel

BACKGROUND

Previous research has sought to adopt the use of drift-reducing technologies (DRTs) for use in field trials to control diamondback moth (DBM) Plutella xylostella (L.) (Lepidoptera: Plutellidae) in canola (Brassica napus L.). Previous studies observed no difference in canopy penetration from fine to coarse sprays, but the coverage was higher for fine sprays. DBM has a strong propensity to avoid sprayed plant material, putting further pressure on selecting technologies that maximise coverage, but often this is at the expense of a greater drift potential. This study aims to examine the addition of a DRT oil that is labelled for control of DBM as well and its effect on the drift potential of the spray solution. The objectives of the study are to quantify the droplet size spectrum and spray drift potential of each nozzle type to select technologies that reduce spray drift, to examine the effect of the insecticide tank mix at both (50 and 100 L ha(-1) ) application rates on droplet size and spray drift potential across tested nozzle type and to compare the droplet size results of each nozzle by tank mix against the drift potential of each nozzle.

RESULTS

The nozzle type affected the drift potential the most, but the spray solution also affected drift potential. The fine spray quality (TCP) resulted in the greatest drift potential (7.2%), whereas the coarse spray quality (AIXR) resulted in the lowest (1.3%), across all spray solutions. The spray solutions mixed at the 100 L ha(-1) application volume rate resulted in a higher drift potential than the same products mixed at the 50 L ha(-1) mix rate. The addition of the paraffinic DRT oil was significant in reducing the drift potential of Bacillus thuringiensis var. kurstkai (Bt)-only treatments across all tested nozzle types. The reduction in drift potential from the fine spray quality to the coarse spray quality was up to 85%.

CONCLUSION

The addition of a DRT oil is an effective way to reduce the spray solution drift potential across all nozzle types and tank mixes evaluated in this study. The greatest reduction in drift potential can be achieved by changing nozzle type, which can reduce the losses of the spray to the surrounding environment. Venturi nozzles greatly reduce the drift potential compared with standard nozzles by as much as 85% across all three insecticide spray solutions. Results suggest that a significant reduction in drift potential can be achieved by changing the nozzle type, and can be achieved without a loss in control of DBM. © 2016 Society of Chemical Industry.