Chimeric antigens displaying GPR65 extracellular loops on a soluble scaffold enabled the discovery of antibodies, which recognized native receptor

GPR65 is a proton-sensing G-protein coupled receptor associated with multiple immune-mediated inflammatory diseases, whose function is relatively poorly understood. With few reagents commercially available to probe the biology of receptor, generation of an anti-GPR65 monoclonal antibody was desired. Using soluble chimeric scaffolds, such as ApoE3, displaying the extracellular loops of GPR65, together with established phage display technology, native GPR65 loop-specific antibodies were identified. Phage-derived loop-binding antibodies recognized the wild-type native receptor to which they had not previously been exposed, generating confidence in the use of chimeric soluble proteins to act as efficient surrogates for membrane protein extracellular loop antigens. This technique provides promise for the rational design of chimeric antigens in facilitating the discovery of specific antibodies to GPCRs.

Biosensing-based quality control monitoring of the higher-order structures of therapeutic antibody domains

Advanced biopharmaceutical manufacturing requires novel process analytical technologies for the rapid and sensitive assessment of the higher-order structures of therapeutic proteins. However, conventional physicochemical analyses of denatured proteins have limitations in terms of sensitivity, throughput, analytical resolution, and real-time monitoring capacity. Although probe-based sensing can overcome these limitations, typical non-specific probes lack analytical resolution and provide little to no information regarding which parts of the protein structure have been collapsed. To meet these analytical demands, we generated biosensing probes derived from artificial proteins that could specifically recognize the higher-order structural changes in antibodies at the protein domain level. Biopanning of phage-displayed protein libraries generated artificial proteins that bound to a denatured antibody domain, but not its natively folded structure, with nanomolar affinity. The protein probes not only recognized the higher-order structural changes in intact IgGs but also distinguished between the denatured antibody domains. These domain-specific probes were used to generate response contour plots to visualize the antibody denaturation caused by various process parameters, such as pH, temperature, and holding time for acid elution and virus inactivation. These protein probes can be combined with established analytical techniques, such as surface plasmon resonance for real-time monitoring or plate-based assays for high-throughput analysis, to aid in the development of new analytical technologies for the process optimization and monitoring of antibody manufacturing.

Characteristics of cold-adapted carbonic anhydrase and efficient carbon dioxide capture based on cell surface display technology

Carbonic anhydrase (CA) is currently under investigation because of its potential to capture CO2. A novel N-domain of ice nucleoproteins (INPN)-mediated surface display technique was developed to produce CA with low-temperature capture CO2 based on the mining and characterization of Colwellia sp. CA (CsCA) with cold-adapted enzyme structural features and catalytic properties. CsCA and INPN were effectively integrated into the outer membrane of the cell as fusion proteins. Throughout the display process, the integrity of the membrane of engineered bacteria BL21/INPN-CsCA was maintained. Notably, the study affirmed positive applicability, wherein 94 % activity persisted after 5 d at 15 °C, and 73 % of the activity was regained after 5 cycles of CO2 capture. BL21/INPN-CsCA displayed a high CO2 capture capacity of 52 mg of CaCO3/mg of whole-cell biocatalysts during CO2 mineralization at 25 °C. Therefore, the CsCA functional cell surface display technology could contribute significantly to environmentally friendly CO2 capture.

Quantitative measurement of cell-surface displayed proteins based on split-GFP assembly

BACKGROUND

Microbial cell surface display technology allows immobilizing proteins on the cell surface by fusing them to anchoring motifs, thereby endowing the cells with diverse functionalities. However, the assessment of successful protein display and the quantification of displayed proteins remain challenging. The green fluorescent protein (GFP) can be split into two non-fluorescent fragments, while they spontaneously assemble and emit fluorescence when brought together through complementation. Based on split-GFP assembly, we aim to: (1) confirm the success display of passenger proteins, (2) quantify the number of passenger proteins displayed on individual cells.

RESULTS

In this study, we propose two innovative methods based on split-green fluorescent protein (split-GFP), named GFP1-10/GFP11 and GFP1-9/GFP10-11 assembly, for the purpose of confirming successful display and quantifying the number of proteins displayed on individual cells. We evaluated the display efficiency of SUMO and ubiquitin using different anchor proteins to demonstrate the feasibility of the two split-GFP assembly systems. To measure the display efficiency of functional proteins, laccase expression was measured using the split-GFP assembly system by co-displaying GFP11 or GFP10-11 tags, respectively.

CONCLUSIONS

Our study provides two split-GFP based methods that enable qualitative and quantitative analyses of individual cell display efficiency with a simple workflow, thus facilitating further comprehensive investigations into microbial cell surface display technology. Both split-GFP assembly systems offer a one-step procedure with minimal cost, simplifying the fluorescence analysis of surface-displaying cells.

Generation and Characterization of Engineered Ubiquitin Variants to Modulate the Ubiquitin Signaling Cascade

The ubiquitin signaling cascade plays a crucial role in human cells. Consistent with this, malfunction of ubiquitination and deubiquitination is implicated in the initiation and progression of numerous human diseases, including cancer. Therefore, the development of potent and specific modulators of ubiquitin signal transduction has been at the forefront of drug development. In the past decade, a structure-based combinatorial protein-engineering approach has been used to generate ubiquitin variants (UbVs) as protein-based modulators of multiple components in the ubiquitin-proteasome system. Here, we review the design and generation of phage-displayed UbV libraries, including the processes of binder selection and library improvement. We also provide a comprehensive overview of the general in vitro and cellular methodologies involved in characterizing UbV binders. Finally, we describe two recent applications of UbVs for developing molecules with therapeutic potential.

Generation and Selection of Synthetic Human Antibody Libraries via Phage Display

Synthetic antibody libraries enable the development of antibodies that can recognize virtually any antigen, with affinity and specificity profiles that are superior to those of natural antibodies. By using highly stable and optimized frameworks, synthetic antibody libraries can be rapidly generated by precisely designing synthetic DNA, allowing absolute control over the position and chemical diversity introduced while expanding the sequence space for antigen recognition. Here, we describe a detailed protocol for the generation of highly diverse synthetic antibody phage display libraries based on a single framework, with diversity genetically incorporated by using finely designed mutagenic oligonucleotides. This general method enables the facile construction of large antibody libraries with precisely tunable features, resulting in the rapid development of recombinant antibodies for virtually any antigen.

Application of the surface engineered recombinant Escherichia coli to the industrial battery waste solution for lithium recovery

Escherichia coli were engineered to selectively adsorb and recover lithium from the environment by employing a bacterial cell surface display strategy. Lithium binding peptide (LBP1) was integrated into the Escherichia coli membrane protein OmpC. The effect of environmental conditions on the adsorption of lithium by a recombinant strain was evaluated, and lithium particles on the cellular surface were analyzed by FE-SEM and XRD. To elevate the lithium adsorption, dimeric, trimeric, and tetrameric repeats of the LBP1 peptide were constructed and displayed on the surface of E. coli. The constructed recombinant E. coli displaying the LBP1 trimer was applied to real industrial lithium battery wastewater to recover lithium.

Construction of Nonnatural Cysteine-Cross-Linked Phage Libraries

Phage display is a powerful technique for rapid construction and screening of peptide libraries with over 109 sequence diversity. The M13 bacteriophage genome can be edited to incorporate randomized amino acids, which will be displayed on its minor coat protein (pIII). To enable screening of nonnatural cyclic peptides on phage, the minor coat protein can be modified with a chemical cross-linker. By taking advantage of the nucleophilicity and low abundance of free cysteines on phage, a variety of cysteine cross-linkers can be installed on the pIII protein. Here, we describe the construction of a chemically modified cyclic phage library through a cysteine cross-linking reagent, 1,3-dichloroacetone (DCA).

Understanding the Structural Requirements of Peptide-Protein Interaction and Applications for Peptidomimetic Development

Protein-protein interaction is at the heart of most biological processes, and small peptides that bind to protein binding sites are resourceful tools to explore and understand the structural requirements for these interactions. In that sense, phage display is a well-suited technology to study protein-protein interactions, as it allows for unbiased screening of billions of peptides in search for those that interact with a protein binding domain. Here, we will illustrate how two distinct but complementary approaches, phage display and nuclear magnetic resonance (NMR), can be utilized to unveil structural details of peptide-protein interaction. Finally, knowledge derived from phage mutagenesis and NMR studies can be streamlined for quick peptidomimetic design and synthesis using the retroinversion approach to validate using in vitro and in vivo assays the therapeutic potential of peptides identified by phage display.

Protocols for Building and Producing High Diversity Peptide Phage Display Libraries

Phage display is an important technology to study protein-protein interaction and protein evolution, with applications in basic science and applied biotechnology, such as drug discovery and the development of targeted therapies. However, in order to be successful during a phage display screening, it is paramount to have good phage libraries. Here, we described detailed procedures to generate peptide phage display libraries with high diversity and billions of transformants.

Review of phage display: A jack-of-all-trades and master of most biomolecule display

Phage display was first described by George P. Smith when it was shown that virus particles were capable of presenting foreign proteins on their surface. The technology has paved the way for the evolution of various biomolecules presentation and diverse selection strategies. This unique feature has been applied as a versatile platform for numerous applications in drug discovery, protein engineering, diagnostics, and vaccine development. Over the decades, the limits of biomolecules displayed on phage particles have expanded from peptides to proteomes and even alternative scaffolds. This has allowed phage display to be viewed as a versatile display platform to accommodate various biomolecules ranging from small peptides to larger proteomes which has significantly impacted advancements in the biomedical industry. This review will explore the vast array of biomolecules that have been successfully employed in phage display technology in biomedical research.

Generation of a Naïve Human scFv Phage Display Library and Panning Selection

Phage display antibody libraries have been successfully used as the essential tool to produce monoclonal antibodies against a plethora of targets ranging from diseases to native biologically important proteins as well as small molecules. It is well documented that diverse antibody genes are the major genetic source for the construction of a high-quality antibody library and selection of high-affinity antibodies. Naïve antibody libraries are derived using the IgM repertoire of healthy donors obtained from B-cells isolated from human peripheral blood mononuclear cell (PBMC). Single-chain fragment variable (scFv) is a routinely used format due to its smaller size and preference for phage display. The process involves the use of a two-step cloning method for library construction. The protocol also covers the biopanning process for target positive clone selection.

Application of Deep Sequencing in Phage Display

This chapter describes the workflow to implement deep sequencing into standard phage display experiments on protein libraries. By harvesting the power of high throughput of these techniques, it allows for comprehensive analysis of the naïve library and library evolution in response to selection by ligand binding. The mutagenized target region of the protein variants encoded by the phage pool is analyzed by Illumina paired-end sequencing. Sequence data are processed to extract selection-enriched amino acid motifs. In addition, a complementary long-read sequencing approach is proposed enabling the monitoring of display vector stability.

Yeast Surface Display Methodology for the Characterization of Food Allergens In Situ

High throughput allergen characterization is often based on phage display technique which is limited by the constraints of a prokaryotic expression system such as potential loss of conformational epitopes and lack of post-translational modifications. Replacing the phage display platform with a yeast surface display system could accelerate the immunological characterization of complex structured allergens. Yeast surface display is a powerful technique that allows faster immunochemical characterization of allergens in situ without the need for protein purification. Yeast surface display offers an alternative that could lead to the improvement of standard immunodiagnostic and immunotherapeutic approaches. In this chapter, we describe a protocol on yeast surface display for the characterization of plant-derived food allergens using actinidin (Act d 1), a major kiwifruit allergen, as a model system.

Brain-Penetrating Peptide Shuttles across the Blood-Brain Barrier and Extracellular-like Space

Systemic delivery of therapeutics into the brain is greatly impaired by multiple biological barriers─the blood-brain barrier (BBB) and the extracellular matrix (ECM) of the extracellular space. To address this problem, we developed a combinatorial approach to identify peptides that can shuttle and transport across both barriers. A cysteine-constrained heptapeptide M13 phage display library was iteratively panned against an established BBB model for three rounds to select for peptides that can transport across the barrier. Using next-generation DNA sequencing and in silico analysis, we identified peptides that were selectively enriched from successive rounds of panning for functional validation in vitro and in vivo. Select peptide-presenting phages exhibited efficient shuttling across the in vitro BBB model. Two clones, Pep-3 and Pep-9, exhibited higher specificity and efficiency of transcytosis than controls. We confirmed that peptides Pep-3 and Pep-9 demonstrated better diffusive transport through the extracellular matrix than gold standard nona-arginine and clinically trialed angiopep-2 peptides. In in vivo studies, we demonstrated that systemically administered Pep-3 and Pep-9 peptide-presenting phages penetrate the BBB and distribute into the brain parenchyma. In addition, free peptides Pep-3 and Pep-9 achieved higher accumulation in the brain than free angiopep-2 and may exhibit brain targeting. In summary, these in vitro and in vivo studies highlight that combinatorial phage display with a designed selection strategy can identify peptides as promising carriers, which are able to overcome the multiple biological barriers of the brain and shuttle different-sized molecules from small fluorophores to large macromolecules for improved delivery into the brain.

Isolation and characterization of a novel single-chain variable fragment (scFv) against Lymphocyte function-associated antigen-1 (LFA-1) using phage display method

Lymphocyte function-associated antigene-1 (LFA-1) is a well-described integrin found on lymphocytes and other leukocytes, which is known to be overexpressed in leukemias and lymphomas. This receptor plays a significant role in immune responses such as T-cell activation, leukocyte cell-cell interactions, and trafficking of leukocyte populations. Subsequently, binders of LFA-1 emerge as potential candidates for cancer and autoimmune therapy. This study used the phage display technique to construct and characterize a high-affinity single-chain fragment variable (scFv) antibody against LFA-1. After expression, purification, dialysis, and concentration of the recombinant LFA-1 protein, four female BALB/c mice were immunized, splenocyte's mRNA was extracted, and cDNA was synthesized. A scFv library was constructed by linking the amplified VH/Vκ fragments through a 72-bp linker using SOEing PCR. Next, the scFv gene fragments were cloned into the pComb-3XSS phagemid vector; thus, the phage library was developed. The selection process involved three rounds of phage-bio-panning, polyclonal, and monoclonal phage ELISA. AF17 was chosen and characterized among the positive clones through SDS-PAGE, Western blotting, indirect ELISA, and in-silico analyses. The results of the study showed the successful construction of a high-affinity scFv library against LFA-1. The accuracy of the AF17 production and its ability to bind to the LFA-1 were confirmed through SDS-PAGE, Western blot, and ELISA. This study highlights the potential application of the high-affinity AF17 against LFA-1 for targeting T lymphocytes for therapeutic purposes.

Screening, Expression and Identification of Nanobody Against Monkeypox Virus A35R

Introduction

The monkeypox (Mpox) virus epidemic presents a significant risk to global public health security. A35R, a crucial constituent of EEV, plays a pivotal role in virus transmission, serves as a vital target for vaccine development, and has potential for serological detection. Currently, there is a dearth of research on nanobodies targeting A35R. The purpose of this study is to identify specific nanobodies target A35R, so as to provide new antibody candidates for Mpox vaccine development and diagnostic kit development.

Methods

Three nanobodies specific to the monkeypox virus protein A35R were screened from a naïve phage display library. After four rounds of panning, positive phage clones were identified by enzyme-linked immunosorbent assay (ELISA). Further, the nanobody fusion protein was constructed in pNFCG1-IgG1-Fc vector and expressed in HEK293F cells and purified by affinity chromatography. The specificity and affinity of the nanobodies were identified by ELISA. The binding kinetics of the VHH antibody to A35R were assessed via employment of a bio-layer interferometry (BLI) apparatus, thereby determining the nanobodies affinity.

Results

The three purified nanobodies showed specific high-affinity binding MPXV A35R, of them, VHH-1 had the best antigen binding affinity (EC50 = 0.010 ug/mL). In addition, VHH-1 on Protein A biosensor can bind Mpox virus A35R, with an affinity constant of 54 nM as determined in BLI assay.

Conclusion

In sum, we has obtained three nanobody strains against Mpox virus A35R with significant affinity and specificity, therefore laying an essential foundation for further research as well as the applications of diagnostic and therapeutic tools of Mpox virus.

A bivalent form of a RBD-specific synthetic antibody effectively neutralizes SARS-CoV-2 variants

Coronavirus Disease 2019 (COVID-19) pandemic is severely impacting the world, and tremendous efforts have been made to deal with it. Despite many advances in vaccines and therapeutics, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants remains an intractable challenge. We present a bivalent Receptor Binding Domain (RBD)-specific synthetic antibody, specific for the RBD of wild-type (lineage A), developed from a non-antibody protein scaffold composed of LRR (Leucine-rich repeat) modules through phage display. We further reinforced the unique feature of the synthetic antibody by constructing a tandem dimeric form. The resulting bivalent form showed a broader neutralizing activity against the variants. The in vivo neutralizing efficacy of the bivalent synthetic antibody was confirmed using a human ACE2-expressing mouse model that significantly alleviated viral titer and lung infection. The present approach can be used to develop a synthetic antibody showing a broader neutralizing activity against a multitude of SARS-CoV-2 variants.

Effects of the Magnetic Orientation of M13 Bacteriophage on Phage Display Selection

Although phage display selection using a library of M13 bacteriophage has become a powerful tool for finding peptides that bind to target materials on demand, a remaining concern of this method is the interference by the M13 main body, which is a huge filament >103  times larger than the displayed peptide, and therefore would nonspecifically adhere to the target or sterically inhibit the binding of the displayed peptide. Meanwhile, filamentous phages are known to be orientable by an external magnetic field. If M13 filaments are magnetically oriented during the library selection, their angular arrangement relative to the target surface would be changed, being expected to control the interference by the M13 main body. This study reports that the magnetic orientation of M13 filaments vertical to the target surface significantly affects the selection. When the target surface was affinitive to the M13 main body, this orientation notably suppressed the nonspecific adhesion. Furthermore, when the target surface was less affinitive to the M13 main body and intrinsically free from the nonspecific adhesion, this orientation drastically changed the population of M13 clones obtained through library selection. The method of using no chemicals but only a physical stimulus is simple, clean, and expected to expand the scope of phage display selection.

Single domain antibodies specific for HER2 dimerization domain effectively disrupts HER2 dimerization

Dimer-dependent phosphorylation of HER2 receptor is a key event for the signal transduction of HER family of receptors which correlates with tumor invasion and metastasis. New generation of therapies based on dimerization domain inhibition using monoclonal or fragment antibodies was introduced. A potent method for manufacturing antibodies and antibody fragments is the phage display antibody library method. A recombinant phage was generated using the phage display method from synthetic dAb library. Subtractive biopanning was performed on sepharose 4b resin. Evaluation of success of subtractive biopanning was confirmed by the PCR fingerprinting after the fourth round of biopanning. The fourth round of biopanning results in the isolation of several dimerization domain reactive clones based on the polyclonal phage ELISA results. Monoclonal phage cell ELISA was used to select the positive clones with the highest affinity, and they were subsequently employed for functional tests. Cell-ELISA, MTT assay and dimerization inhibition test revealed that the reactivity and specificity of the selected monoclonal phage to dimerization domain of HER2. Further, Annexin V/PI staining and gene expression analysis showed that increased apoptosis rates. Also, in silico binding of the selected clones to conformational structure of HER2 was applied, using protein-protein docking tool of the ICM-Pro software, and showed sdAbs were specifically interacted with dimerization domain of the receptor. In conclusion, we have identified a single domain targeting HER2 dimerization, which represents a promising therapeutic and diagnostic candidate for HER2-positive cancers. Purified sdAb needs to more research to evaluate it both in vivo and in vitro via functional tests to determine if it can be applied for treatment and diagnostics.

Synthesis of epitope-targeting nanobody based on native protein-protein interactions for FtsZ filamentation suppressor

Phage display and biopanning are powerful tools for generating binding molecules for a specific target. However, the selection process based only on binding affinity provides no assurance for the antibody's affinity to the target epitope. In this study, we propose a molecular-evolution approach guided by native protein-protein interactions to generate epitope-targeting antibodies. The binding-site sequence in a native protein was grafted into a complementarity-determining region (CDR) in the nanobody, and a nonrelated CDR loop (in the grafted nanobody) was randomized to create a phage display library. In this construction of nanobodies by integrating graft and evolution technology (CAnIGET method), suitable grafting of the functional sequence added functionality to the nanobody, and the molecular-evolution approach enhanced the binding function to inhibit the native protein-protein interactions. To apply for biological tool with growth screening, model nanobodies with an affinity for filamenting temperature-sensitive mutant Z (FtsZ) from Staphylococcus aureus were constructed and completely inhibited the polymerization of FtsZ as a function. Consequently, the expression of these nanobodies drastically decreased the cell division rate. We demonstrate the potential of the CAnIGET method with the use of native protein-protein interactions for steady epitope-specific evolutionary engineering.

Sequence tolerance of immunoglobulin variable domain framework regions to noncanonical intradomain disulfide linkages

Most immunoglobulin (Ig) domains bear only a single highly conserved canonical intradomain, inter-β-sheet disulfide linkage formed between Cys23-Cys104, and incorporation of rare noncanonical disulfide linkages at other locations can enhance Ig domain stability. Here, we exhaustively surveyed the sequence tolerance of Ig variable (V) domain framework regions (FRs) to noncanonical disulfide linkages. Starting from a destabilized VH domain lacking a Cys23-Cys104 disulfide linkage, we generated and screened phage-displayed libraries of engineered VHs, bearing all possible pairwise combinations of Cys residues in neighboring β-strands of the Ig fold FRs. This approach identified seven novel Cys pairs in VH FRs (Cys4-Cys25, Cys4-Cys118, Cys5-Cys120, Cys6-Cys119, Cys22-Cys88, Cys24-Cys86, and Cys45-Cys100; the international ImMunoGeneTics information system numbering), whose presence rescued domain folding and stability. Introduction of a subset of these noncanonical disulfide linkages (three intra-β-sheet: Cys4-Cys25, Cys22-Cys88, and Cys24-Cys86, and one inter-β-sheet: Cys6-Cys119) into a diverse panel of VH, VL, and VHH domains enhanced their thermostability and protease resistance without significantly impacting expression, solubility, or binding to cognate antigens. None of the noncanonical disulfide linkages identified were present in the natural human VH repertoire. These data reveal an unexpected permissiveness of Ig V domains to noncanonical disulfide linkages at diverse locations in FRs, absent in the human repertoire, whose presence is compatible with antigen recognition and improves domain stability. Our work represents the most complete assessment to date of the role of engineered noncanonical disulfide bonding within FRs in Ig V domain structure and function.

Phage Display of Two Distinct Warheads to Inhibit Challenging Proteins

Falling in between traditional small molecules and antibodies in size, peptides are emerging as a privileged therapeutic modality, one that can harness the benefits of both small molecule and antibody drugs. To discover potential peptide therapeutics, it is highly desirable to have high throughput screening platforms that can assess peptides with diverse and non-natural functional motifs. With this contribution, we present a novel phage library that incorporates two distinct designer groups. As an example, a pair of reversible covalent warheads was installed onto phage-displayed peptides to target a cysteine and a lysine. The double modification is realized by sequential modification of an N-terminal cysteine and then an internal cysteine using chemoselective chemistry. Screening of this double-warhead-presenting library against TEV protease readily revealed peptide inhibitors with single-digit micromolar potency. Importantly, our structure-activity studies demonstrate that both covalent warheads make important contributions to TEV protease inhibition. We envision that our strategy of double phage modification can be readily extended to build phage libraries with diverse structural motifs, allowing facile expansion of the chemical space coverable by phage display.

Unleashing the power of shark variable single domains (VNARs): broadly neutralizing tools for combating SARS-CoV-2

The pandemic caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) generated a joint global effort to develop vaccines and other treatments that could mitigate the negative effects and the rapid spread of the virus. Single-domain antibodies derived from various sources, including cartilaginous fish, camelids, and humans, have gained attention as promising therapeutic tools against coronavirus disease 2019. Shark-derived variable new antigen receptors (VNARs) have emerged as the smallest naturally occurring antigen-binding molecules. Here, we compile and review recent published studies on VNARs with the capacity to recognize and/or neutralize SARS-CoV-2. We found a close balance between the use of natural immune libraries and synthetic VNAR libraries for the screening against SARS-CoV-2, with phage display being the preferred display technology for the selection of VNARs against this virus. In addition, we discuss potential modifications and engineering strategies employed to improve the neutralization potential of VNARs, such as exploring fusion with the Fc domain of human Immunoglobulin G (IgG) to increase avidity and therapeutic potential. This research highlights the potential of VNARs as powerful molecular tools in the fight against infectious diseases.

Subtractive panning for the isolation of monoclonal PEPITEM peptide antibody by phage display

Antibody phage display is a key tool for the development of monoclonal antibodies against various targets. However, the development of anti-peptide antibodies is a challenging process due to the small size of peptides for binding. This makes anchoring of peptides a preferred approach for panning experiments. A common approach is by using streptavidin as the anchor protein to present biotinylated peptides for panning. Here, we propose the use of recombinant expression of the target peptide and an immunogenic protein as a fusion for panning. The peptide inhibitor of trans-endothelial migration (PEPITEM) peptide sequence was fused to the Mycobacterium tuberculosis (Mtb) α-crystalline (AC) as an anchor protein. The panning process was carried out by subtractive selection of the antibody library against the AC protein first, followed by binding to the library to PEPITEM fused AC (PEPI-AC). A unique monoclonal scFv antibodies with good specificity were identified. In conclusion, the use of an alternative anchor protein to present the peptide sequence coupled with subtractive panning allows for the identification of unique monoclonal antibodies against a peptide target.

Glioblastoma Stem Cell Targeting Peptide Isolated Through Phage Display Binds Cadherin 2

Glioblastoma stem cells (GSCs) have unique properties of self-renewal and tumor initiation that make them potential therapeutic targets. Development of effective therapeutic strategies against GSCs requires both specificity of targeting and intracranial penetration through the blood-brain barrier. We have previously demonstrated the use of in vitro and in vivo phage display biopanning strategies to isolate glioblastoma targeting peptides. Here we selected a 7-amino acid peptide, AWEFYFP, which was independently isolated in both the in vitro and in vivo screens and demonstrated that it was able to target GSCs over differentiated glioma cells and non-neoplastic brain cells. When conjugated to Cyanine 5.5 and intravenously injected into mice with intracranially xenografted glioblastoma, the peptide localized to the site of the tumor, demonstrating intracranial tumor targeting specificity. Immunoprecipitation of the peptide with GSC proteins revealed Cadherin 2 as the glioblastoma cell surface receptor targeted by the peptides. Peptide targeting of Cadherin 2 on GSCs was confirmed through ELISA and in vitro binding analysis. Interrogation of glioblastoma databases demonstrated that Cadherin 2 expression correlated with tumor grade and survival. These results confirm that phage display can be used to isolate unique tumor-targeting peptides specific for glioblastoma. Furthermore, analysis of these cell specific peptides can lead to the discovery of cell specific receptor targets that may serve as the focus of future theragnostic tumor-homing modalities for the development of precision strategies for the treatment and diagnosis of glioblastomas.

Genotyped functional screening of soluble Fab clones enables in-depth analysis of mutation effects

Monoclonal antibodies (mAbs) and their fragments are widely used in therapeutics, diagnostics and basic research. Although display methods such as phage display offer high-throughput, affinities of individual antibodies need to be accurately measured in soluble format. We have developed a screening platform capable of providing genotyped functional data from a total of 9216 soluble, individual antigen binding fragment (Fab) clones by employing next-generation sequencing (NGS) with hierarchical indexing. Full-length, paired variable domain sequences (VL-VH) are linked to functional screening data, enabling in-depth analysis of mutation effects. The platform was applied to four phage display-selected scFv/Fab screening projects and one site-saturation VH affinity maturation project. Genotyped functional screening simultaneously enabled the identification of affinity improving mutations in the VH domain of Fab 49A3 recognizing Dengue virus non-structural protein 1 (NS1) serotype 2 and informed on VH residue positions which cannot be changed from wild-type without decreasing the affinity. Genotype-based identification revealed to us the extent of intraclonal signal variance inherent to single point screening data, a phenomenon often overlooked in the field. Moreover, genotyped screening eliminated the redundant selection of identical genotypes for further study and provided a new analysis tool to evaluate the success of phage display selections and remaining clonal diversity in the screened repertoires.

Novel peptide identified from viable-cell based phage display technique regulates growth cycle of Daphnia magna

Phage display is a widely used technique for selecting specific binding peptides, but presenting antigens in their natural form can be challenging, as protein coating may induce structural changes. In this study, we employed a whole cell-based phage display technique without a coating step to select peptides that bind specifically to Daphnia magna eggs. Boiled eggs were used as a control to ensure that antigens were presented in their natural forms. We identified a peptide, DEP1 (LYALPLSHLKSHGGG), with the highest binding affinity to D. magna eggs. DEP1 did not affect zebrafish eggs, but it inhibited normal hatching and reproductive ability in D. magna eggs, and hindered growth in neonates before their first ecdysis. Morphological analysis revealed that DEP1 caused intestinal damage and tissue abnormalities. Our findings demonstrate that the whole cell-based phage display technique is successful in presenting antigens in their natural form, and that the DEP1 peptide can be applied to regulate the growth cycle of D. magna. These results have implications for the use of phage display in environmental research and the potential use of DEP1 for hazardous organisms in aquatic systems.

Combining Phage Display Technology with In Silico-Designed Epitope Vaccine to Elicit Robust Antibody Responses against Emerging Pathogen Tilapia Lake Virus

Antigen epitope identification is a critical step in the vaccine development process and is a momentous cornerstone for the development of safe and efficient epitope vaccines. In particular, vaccine design is difficult when the function of the protein encoded by the pathogen is unknown. The genome of Tilapia lake virus (TiLV), an emerging virus from fish, encodes protein functions that have not been elucidated, resulting in a lag and uncertainty in vaccine development. Here, we propose a feasible strategy for emerging viral disease epitope vaccine development using TiLV. We determined the targets of specific antibodies in serum from a TiLV survivor by panning a Ph.D.-12 phage library, and we identified a mimotope, TYTTRMHITLPI, referred to as Pep3, which provided protection against TiLV after prime-boost vaccination; its immune protection rate was 57.6%. Based on amino acid sequence alignment and structure analysis of the target protein from TiLV, we further identified a protective antigenic site (399TYTTRNEDFLPT410) which is located on TiLV segment 1 (S1). The epitope vaccine with keyhole limpet hemocyanin (KLH-S1399-410) corresponding to the mimotope induced the tilapia to produce a durable and effective antibody response after immunization, and the antibody depletion test confirmed that the specific antibody against S1399-410 was necessary to neutralize TiLV. Surprisingly, the challenge studies in tilapia demonstrated that the epitope vaccine elicited a robust protective response against TiLV challenge, and the survival rate reached 81.8%. In conclusion, this study revealed a concept for screening antigen epitopes of emerging viral diseases, providing promising approaches for development and evaluation of protective epitope vaccines against viral diseases. IMPORTANCE Antigen epitope determination is an important cornerstone for developing efficient vaccines. In this study, we attempted to explore a novel approach for epitope discovery of TiLV, which is a new virus in fish. We investigated the immunogenicity and protective efficacy of all antigenic sites (mimotopes) identified in serum of primary TiLV survivors by using a Ph.D.-12 phage library. We also recognized and identified the natural epitope of TiLV by bioinformatics, evaluated the immunogenicity and protective effect of this antigenic site by immunization, and revealed 2 amino acid residues that play important roles in this epitope. Both Pep3 and S1399-410 (a natural epitope identified by Pep3) elicited antibody titers in tilapia, but S1399-410 was more prominent. Antibody depletion studies showed that anti-S1399-410-specific antibodies were essential for neutralizing TiLV. Our study demonstrated a model for combining experimental and computational screens to identify antigen epitopes, which is attractive for epitope-based vaccine development.

D-Peptide and D-Protein Technology: Recent Advances, Challenges, and Opportunities

Total chemical protein synthesis provides access to entire D-protein enantiomers enabling unique applications in molecular biology, structural biology, and bioactive compound discovery. Key enzymes involved in the central dogma of molecular biology have been prepared in their D-enantiomeric forms facilitating the development of mirror-image life. Crystallization of a racemic mixture of L- and D-protein enantiomers provides access to high-resolution X-ray structures of polypeptides. Additionally, D-enantiomers of protein drug targets can be used in mirror-image phage display allowing discovery of non-proteolytic D-peptide ligands as lead candidates. This review discusses the unique applications of D-proteins including the synthetic challenges and opportunities.

An easy-to-use high-throughput selection system for the discovery of recombinant protein binders from alternative scaffold libraries

Selection by phage display is a popular and widely used technique for the discovery of recombinant protein binders from large protein libraries for therapeutic use. The protein library is displayed on the surface of bacteriophages which are amplified using bacteria, preferably Escherichia coli, to enrich binders in several selection rounds. Traditionally, the so-called panning procedure during which the phages are incubated with the target protein, washed and eluted is done manually, limiting the throughput. High-throughput systems with automated panning already in use often require high-priced equipment. Moreover, the bottleneck of the selection process is usually the screening and characterization. Therefore, having a high-throughput panning procedure without a scaled screening platform does not necessarily increase the discovery rate. Here, we present an easy-to-use high-throughput selection system with automated panning using cost-efficient equipment integrated into a workflow with high-throughput sequencing and a tailored screening step using biolayer-interferometry. The workflow has been developed for selections using two recombinant libraries, ADAPT (Albumin-binding domain-derived affinity proteins) and CaRA (Calcium-regulated affinity) and has been evaluated for three new targets. The newly established semi-automated system drastically reduced the hands-on time and increased robustness while the selection outcome, when compared to manual handling, was very similar in deep sequencing analysis and generated binders in the nanomolar affinity range. The developed selection system has shown to be highly versatile and has the potential to be applied to other binding domains for the discovery of new protein binders.

Construction of Synthetic Antibody Phage Display Libraries

Synthetic antibody libraries provide a vast resource of renewable antibody reagents that can rival natural antibodies and be rapidly isolated through controlled in vitro selections. Use of highly optimized human frameworks enables the incorporation of defined diversity at positions that are most likely to contribute to antigen recognition. This protocol describes the construction of synthetic antibody libraries based on a single engineered human autonomous variable heavy domain scaffold with diversity in all three complementarity-determining regions. The resulting libraries can be used to generate recombinant domain antibodies targeting a wide range of protein antigens using phage display. Furthermore, analogous methods can be used to construct antibody libraries based on larger antibody fragments or second-generation libraries aimed to fine-tune antibody characteristics including affinity, specificity, and manufacturability. The procedures rely on standard reagents and equipment available in most molecular biology laboratories.

Targeting Intracellular Antigens with pMHC-Binding Antibodies: A Phage Display Approach

Antibodies that bind peptide-MHC (pMHC) complex in a manner akin to T cell receptor (TCR) have not only helped in understanding the mechanism of TCR-pMHC interactions in the context of T cell biology but also spurred considerable interest in recent years as potential cancer therapeutics. Traditional methods to generate such antibodies using hybridoma and B cell sorting technologies are sometimes inadequate, possibly due to the small contribution of peptide to the overall B cell epitope space on the surface of the pMHC complex (typical peptide MW = 1 kDa versus MHC MW = 45 kDa) and to the multiple efficiency limiting steps inherent in these methods. In this chapter we describe phage display approaches, including a cell panning strategy, for the rapid generation of such antibodies with high specificity and affinity.

Mapping Epitopes by Phage Display

Monoclonal antibodies (mAbs) are valuable biological molecules, serving for many applications. Therefore, it is advantageous to know the interaction pattern between antibodies and their antigens. Regions on the antigen which are recognized by the antibodies are called epitopes, and the respective molecular counterpart of the epitope on the mAbs is called paratope. These epitopes can have many different compositions and/or structures. Knowing the epitope is a valuable information for the development or improvement of biological products, e.g., diagnostic assays, therapeutic mAbs, and vaccines, as well as for the elucidation of immune responses. Most of the techniques for epitope mapping rely on the presentation of the target, or parts of it, in a way that it can interact with a certain mAb. Among the techniques used for epitope mapping, phage display is a versatile technology that allows the display of a library of oligopeptides or fragments from a single gene product on the phage surface, which then can interact with several antibodies to define epitopes. In this chapter, a protocol for the construction of a single-target oligopeptide phage library, as well as for the panning procedure for epitope mapping using phage display is given.

Antibody Phage Display

The application of antibodies has transcended across many areas of work but mainly as a research tool, for diagnostic and for therapeutic applications. Antibodies are immunoproteins from vertebrates that have the unique property of specifically binding foreign molecules and distinguish target antigens. This property allows antibodies to effectively protect the host from infections. Apart from the hybridoma technology using transgenic animals, antibody phage display is commonly considered the gold standard technique for the isolation of human monoclonal antibodies. The concept of antibody phage display surrounds the ability to display antibody fragments on the surface of M13 bacteriophage particles with the corresponding gene packaged within the particle. A repetitive in vitro affinity based selection process permits the enrichment of target specific binders. This process of recombinant human monoclonal antibody generation also enables additional engineering for various applications. This makes phage display an indispensable technique for antibody development and engineering activities.

Antibody Selection in Solution Using Magnetic Beads

Antibody phage display is a valuable in vitro technology to generate recombinant, sequence-defined antibodies for research, diagnostics, and therapy. Up to now (autumn 2022), 14 FDA/EMA-approved therapeutic antibodies were developed using phage display, including the world best-selling antibody adalimumab. Additionally, recombinant, sequence-defined antibodies have significant advantages over their polyclonal counterparts.For a successful in vitro antibody generation by phage display, a suitable panning strategy is highly important. We present in this book chapter the panning in solution and its advantages over panning with immobilized antigens and give detailed protocols for the panning and screening procedure.

Applications of High-Throughput DNA Sequencing to Single-Domain Antibody Discovery and Engineering

Next-generation DNA sequencing (NGS) technologies have made it possible to interrogate antibody repertoires to unprecedented depths, typically via sequencing of cDNAs encoding immunoglobulin variable domains. In the absence of heavy-light chain pairing, the variable domains of heavy chain-only antibodies (HCAbs), referred to as single-domain antibodies (sdAbs), are uniquely amenable to NGS analyses. In this chapter, we provide simple and rapid protocols for producing and sequencing multiplexed immunoglobulin variable domain (VHH, VH, or VL) amplicons derived from a variety of sources using the Illumina MiSeq platform. Generation of such amplicon libraries is relatively inexpensive, requiring no specialized equipment and only a limited set of PCR primers. We also present several applications of NGS to sdAb discovery and engineering, including: (1) evaluation of phage-displayed sdAb library sequence diversity and monitoring of panning experiments; (2) identification of sdAbs of predetermined epitope specificity following competitive elution of phage-displayed sdAb libraries; (3) direct selection of B cells expressing antigen-specific, membrane-bound HCAb using antigen-coupled magnetic beads and identification of antigen-specific sdAbs, and (4) affinity maturation of lead sdAbs using tandem phage display selection and NGS. These methods can easily be adapted to other types of proteins and libraries and expand the utility of in vitro display technology.

Epivolve: A Protocol for Site-Directed Antibodies

Researchers can often successfully generate antibodies to predicted epitopes. Especially when the epitopes are on the surface of a protein or in a hydrophilic loop. But it is difficult to direct recombinant antibodies to bind either to- or near a specific amino acid on a protein or peptide. We have developed a unique immune-targeting strategy, that we call "Epivolve," that enables us to make site-specific antibodies (Abs). Epivolve technology leverages a highly immunogenic modified amino acid that acts as a "pseudo-hapten" immuno-target and takes advantage of Ab affinity maturation technologies to make high-affinity site-specific antibodies. Epivolve functions by the evolution of an Ab paratope to either synonymous or especially non-synonymous amino acid (aa) binding. Here we describe the use of Epivolve technology in phage display and the protocols for developing site-specific antibodies.

High-Throughput IgG Reformatting and Expression Using Hybrid Secretion Signals and InTag Positive Selection Technology

We have previously published protocols for high-throughput IgG reformatting and expression, that enable rapid reformatting of phage-displayed antibody Fab fragments into a single dual expression vector for full IgG expression in Expi293F cells (Chen et al. Nucleic Acids Res 42:e26, 2014; Chen et al. Methods in Molecular Biology, vol 1701, 2018). However, when working with phage clones from a naïve library containing highly diverse N-terminal sequences, where the 5' PCR primers bind, the PCR step can become cumbersome. To overcome this limitation, we have investigated and found that the C-terminal 7 amino acid residues of the human antibody VH1 secretion signal can be replaced with those from ompA or pelB bacterial signals to form hybrid signal sequences that can drive strong IgG expression in Expi293F cells. The use of such hybrid signals allows any Fab fragment in the library to be amplified and cloned into the IgG expression vector using only a single 5' PCR primer targeting the bacterial secretion signal of the light or heavy chain, thus dramatically simplifying the IgG reformatting workflow.

Mapping Polyclonal Antibody Responses to Infection Using Next-Generation Phage Display

Peptide phage display has historically been used to epitope map monoclonal antibodies. More recently, by coupling this method with next-generation sequencing (so-called next-generation phage display, NGPD) to mass screen peptide binding events, the methodology has been successfully applied to map polyclonal antibody responses to infection. This leads to the identification of panels of mimotopes that represent the pathogen's epitopes. One potential advantage of using such an approach is that the mimotopes can represent not just linear epitopes but also conformational epitopes or those produced from post-translational modifications of proteins or from other non-protein macromolecules. The mapping of such complex immunological recognition of a pathogen can inform novel serological assay development and vaccine design. Here, we provide detailed methods for the application of NGPD to identify panels of mimotopes that are recognized specifically by antibodies from individuals with a particular infection.

Efficient Cloning of Inserts for Phage Display by Golden Gate Assembly

Phage display enables the discovery of high-affinity binders. In phage display, one commonly uses traditional cloning methods to insert DNA into the coding region of one of the five capsid proteins. Here we describe the use of a new vector with kanamycin resistance and BsaI sites for the utilization of Golden Gate cloning into the N-terminus of mature protein III. We also describe the successful pentavalent display of six different inserts: the AviD-tag, the Z-domain of protein A, the Myc-tag, the ALFA nanobody, the BC2 nanobody, and the Flag-tag.

Selection of Affibody Affinity Proteins from Phagemid Libraries

Herein, we describe a general protocol for the selection of target-binding affinity protein molecules from a phagemid-encoded library. The protocol is based on our experience with phage display selections of non-immunoglobulin affibody affinity proteins but can in principle be applied to perform biopanning experiments from any phage-displayed affinity protein library available in a similar phagemid vector. The procedure begins with an amplification of the library from frozen bacterial glycerol stocks via cultivation and helper phage superinfection, followed by a step-by-step instruction of target protein preparation, selection cycles, and post-selection analyses. The described procedures in this standard protocol are relatively conservative and rely on ordinary reagents and equipment available in most molecular biology laboratories.

Antibody Selection on Cells Targeting Membrane Proteins

Antibody phage display selection on cells is a powerful tool to generate highly specific antibodies recognizing a target in its cell bound conformation. Unlike phage display selections on immobilized proteins, it is not hampered by difficulties caused by recombinant protein expression of target proteins like altered folding or loss of epitopes. It also allows the generation of antibodies against proteins that are commercially unavailable, due to high production costs or lack of production. It is also a promising approach for single and especially multi-pass membrane proteins for which the complex secondary and tertiary structures can often not be retained upon recombinant protein expression. The selected antibodies are not only tools for in vivo studies but also used for the development of diagnostic assays and for therapeutical applications. Here, we describe a straightforward protocol for generation and screening of scFv binders by phage display selections on cells.

Magnetic Nanoparticle-Based Semi-automated Panning for High-Throughput Antibody Selection

Bio-panning is a common process involved in recombinant antibody selection against defined targets. The biopanning process aims to isolate specific antibodies against an antigen via affinity selection from a phage display library. In general, antigens are immobilized on solid surfaces such as polystyrene plastic, magnetic beads, and nitrocellulose. For high-throughput selection, semi-automated panning selection allows simultaneous panning against multiple target antigens adapting automated particle processing systems such as the KingFisher Flex. The system setup allows for minimal human intervention for pre- and post-panning steps such as antigen immobilization, phage rescue, and amplification. In addition, the platform is also adaptable to perform polyclonal and monoclonal ELISA for the evaluation process. This chapter will detail the protocols involved from the selection stage until the monoclonal ELISA evaluation with important notes attached at the end of this chapter for optimization and troubleshooting purposes.

Antibody Batch Cloning

The antigen-binding ability of each antibody clone selected by phage display is usually initially ranked by a screening ELISA using monovalent scFv antibody fragments. Further characterization often requires bivalent antibody molecules such as IgG or scFv-Fc fusions. To produce these, the V region encoding genes of selected hits have to be cloned into a mammalian expression vector and analyzed as a bivalent molecule, requiring a laborious cloning procedure. We established a high-throughput procedure allowing rapid screening of candidates in bivalent formats. This protocol allows for the parallelized cloning of all selected antibody fragments into a mammalian expression vector in the 96-well plate format. The bivalent antibody molecules can then be produced and purified in 96-well plates for further analysis in microtiter plate assays.

Biomarker Discovery by ORFeome Phage Display

Phage display is an efficient and robust method for protein-protein interaction studies. Although it is mostly used for antibody generation, it can be also utilized for the discovery of immunogenic proteins that could be used as biomarkers. Through this technique, a genome or metagenome is fragmented and cloned into a phagemid vector. The resulting protein fragments from this genetic material are displayed on M13 phage surface, while the corresponding gene fragments are packaged. This packaging process uses the pIII deficient helperphage, called Hyperphage (M13KO7 ΔpIII), so open reading frames (ORFs) are enriched in these libraries, giving the name to this method: ORFeome phage display. After conducting a selection procedure, called "bio-panning," relevant immunogenic peptides or protein fragments are selected using purified antibodies or serum samples, and can be used as potential biomarkers. As ORFeome phage display is an in vitro method, only the DNA or cDNA of the species of interest is needed. Therefore, this approach is also suitable for organisms that are hard to cultivate, or metagenomic samples, for example. An additional advantage is that the biomarker discovery is not limited to surface proteins due to the presentation of virtually every kind of peptide or protein fragment encoded by the ORFeome on the phage surface. At last, the selected biomarkers can be the start for the development of diagnostic assays, vaccines, or protein interaction studies.

Antibody Selection via Phage Display in Microtiter Plates

The most common and robust in vitro technology to generate monoclonal human antibodies is phage display. This technology is a widely used and powerful key technology for recombinant antibody selection. Phage display-derived antibodies are used as research tools, in diagnostic assays, and by 2022, 14 phage display-derived therapeutic antibodies were approved. In this review, we describe a fast high-throughput antibody (scFv) selection procedure in 96-well microtiter plates. The given detailed protocol allows the antibody selection ("panning"), screening, and identification of monoclonal antibodies in less than 2 weeks. Furthermore, we describe an on-rate panning approach for the selection of monoclonal antibodies with fast on-rates.

Deep Mining of Complex Antibody Phage Pools

An important, and rapidly growing class of drugs are antibodies which can be discovered through phage display technology. In this technique, antibodies are typically first enriched through consecutive rounds of selection on a target antigen with amplification in bacteria between each selection round. Thereafter, a subset of random individual clones is analyzed for binding in a screening procedure. This results in discovery of the most abundant antibodies in the pool. However, there are multiple factors affecting the enrichment of antibodies during the selection resulting in a very complex output pool of antibodies. A few antibodies are present in many copies and others only in a few copies, where the most abundant antibodies are not necessarily the functionally best ones. In order to utilize the full potential of the output from a phage display selection, and enable discovery of low abundant, potentially functionally important clones, deep mining technologies are needed. In this chapter, two methods for deep mining of an antibody pool are described, protein depletion and antibody blocking. The methods can be applied both when the target is a single antigen and on complex antigen mixtures such as whole cells and tissues.

Construction of Rabbit Immune Antibody Libraries

Rabbits have distinct advantages over mice as a source of target-specific antibodies. They produce higher affinity antibodies than mice and may elicit strong immune response against antigens or epitopes that are poorly immunogenic or tolerated in mice. However, a great majority of currently available monoclonal antibodies are of murine origin because of the wider availability of murine fusion partner cell lines and well-established tools and protocols for fusion and cloning of mouse hybridoma. Phage display selection of antibody libraries is an alternative method to hybridoma technology for the generation of target-specific monoclonal antibodies. High-affinity monoclonal antibodies from non-murine species can readily be obtained by constructing immune antibody libraries from B cells of the immunized animal and screening the library by phage display. In this article, we describe the construction of a rabbit immune Fab library for the facile isolation of rabbit monoclonal antibodies. After immunization, B-cell cDNA is obtained from the spleen of the animal, from which antibody variable domain repertoires are amplified and assembled into a Fab repertoire by PCR. The Fab genes are then cloned into a phagemid vector and transformed to E. coli, from which a phage-displayed immune Fab library is rescued. Such a library can be biopanned against the immunization antigen for rapid identification of high-affinity, target-specific rabbit monoclonal antibodies.

Construction of Human Immune and Naive scFv Phage Display Libraries

Antibody phage display is a widely used in vitro selection technology for the generation of human recombinant antibodies and has yielded thousands of useful antibodies for research, diagnostics, and therapy. In order to successfully generate antibodies using phage display, the basis is the construction of high-quality antibody gene libraries. Here, we describe detailed methods for the construction of such high-quality immune and naive scFv gene libraries of human origin. These protocols were used to develop human naive (e.g., HAL9/10) and immune libraries, which resulted in thousands of specific antibodies for all kinds of applications.