Supercritical fluid processing of polymer thin films: an X-ray study of molecular-level porosity

This paper reviews our recent experimental results that address the effects of solvent density inhomogeneities in supercritical carbon dioxide (scCO(2)) on polymer thin film processing. The key phenomenon is excess sorption of CO(2) molecules into polymer thin films even when the bulk miscibility with CO(2) is very poor. We have found that the amount of the excess sorption is attributed to the large density fluctuations in scCO(2) near the critical point. Further, taking advantage of the vitrification process of polymer chains through quick evaporation of CO(2), we can preserve the "expanded" structures as they are. The resultant films have large degree of molecular-level porosity that is very useful in producing coatings with low dielectric constants, enhanced adhesion, and metallization properties. These characteristics can be achieved in an environmentally "green" manner, without organic solvents, and are not specific to any class of polymers.

Static bone cavity of the mandible: Computed tomography findings with histopathologic correlation

PURPOSE

To review computed tomography (CT) findings of histopathologically examined static bone cavities in order to determine whether an additional pathogenesis may play a role in this disease.

MATERIAL AND METHODS

Four patients with histopathologically examined static bone cavities were included in this retrospective study. Location, appearance of bone remodeling, tissue characteristics, and contrast enhancement of the cavity were assessed on CT images. CT findings were then compared with the histopathological findings.

RESULTS

Static bone cavity was found in the lingual molar region in three patients and in the lingual cuspid region of the mandible in one patient. Both fatty and soft tissues were present in the cavities of all four patients. Attenuation of the soft tissue in the cavities was found to be different from that of the submandibular gland. The soft tissue showed enhancement with contrast-enhanced CT in three patients. For all patients, the histopathologic content of the static bone cavity included fat, soft tissue, and abnormal vasculature. The thickened vein wall in the abnormal vasculature was observed. Aberrant tissue of the submandibular gland was not found in any of the static bone cavities.

CONCLUSION

Contrast enhancement of the soft tissue on the contrast-enhanced CT images suggests the presence of vasculature in the cavities. Histopathological examination confirmed the presence of fatty tissue and dilated abnormal vessels, and the absence of salivary gland tissue in the cavities. These findings show that vascular structures are prominent in tissues found in static bone cavities.

Differentiation of Intraplaque Versus Juxtaluminal Hemorrhage/Thrombus in Advanced Human Carotid Atherosclerotic Lesions by In Vivo Magnetic Resonance Imaging

Background— Intraplaque hemorrhage and juxtaluminal hemorrhage/thrombus may differ in cause and clinical implications. This study tested the hypothesis that MRI can distinguish between intraplaque hemorrhage and juxtaluminal hemorrhage/thrombus and investigated the association between hemorrhage and underlying lesion types.

Methods and Results— Twenty-six patients scheduled for carotid endarterectomy were imaged with a 1.5-T GE scanner by a multicontrast-weighted MRI technique. Hemorrhages were identified with previously established MRI criteria, and differentiations were made between intraplaque and juxtaluminal hemorrhage/thrombus. Corresponding histology was used to confirm the magnetic resonance findings. Tissues underlying areas of hemorrhage/thrombus were histologically categorized according to modified American Heart Association criteria. Of 190 matched sections, 140 contained areas of hemorrhage by histology, of which MRI correctly detected 134. The sensitivity and specificity for MRI to correctly identify cross sections that contained hemorrhage were 96% and 82%, respectively. Furthermore, MRI was able to distinguish juxtaluminal hemorrhage/thrombus from intraplaque hemorrhage with an accuracy of 96%. The distribution of lesion types underlying hemorrhages differed significantly ( P =0.004). Intraplaque hemorrhage had an underlying lipid-rich type IV/V lesion in 55% of histological sections, whereas juxtaluminal hemorrhage/thrombus had an underlying calcified lesion type VII in 70% of sections.

Conclusions— In vivo high-resolution MRI can detect and differentiate intraplaque hemorrhage from juxtaluminal hemorrhage/thrombus with good accuracy. The association of hemorrhage and lesion types suggests potential differences in origin. Noninvasive MRI therefore provides a possible tool for prospectively studying differences in origin of plaque hemorrhage and the association of plaque progression and instability.

Thermally induced phase transitions and morphological changes in organoclays

Thermal transitions and morphological changes in Cloisite organoclays were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, and in situ simultaneous small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD) over the temperature range of 30-260 degrees C. On the basis of DSC and FTIR results, the surfactant component in organoclays was found to undergo a melting-like order-disorder transition between 35 and 50 degrees C. The transition temperatures of the DSC peaks (Ttr) in the organoclays varied slightly with the surfactant content; however, they were significantly lower than the melting temperature of the free surfactant (dimethyldihydrotallowammonium chloride; Tm = 70 degrees C). FTIR results indicated that within the vicinity of Ttr, the gauche content increased significantly in the conformation of surfactant molecules, while WAXD results did not show any change in three-dimensional ordering. Multiple scattering peaks were observed in SAXS profiles. In the SAXS data acquired below Ttr, the second scattering peak was found to occur at an angle lower than twice that of the first peak position (i.e., nonequidistant scattering maxima). In the data acquired above Ttr, the second peak was found to shift toward the equidistant position (the most drastic shift was seen in the system with the highest surfactant content). Using a novel SAXS modeling technique, we suggest that the appearance of nonequidistant SAXS maxima could result from a bimodal layer thickness distribution of the organic layers in organoclays. The occurrence of the equidistant scattering profile above Ttr could be explained by the conversion of the bimodal distribution to the unimodal distribution, indicating a redistribution of the surfactant that is nonbounded to the clay surface. At temperatures above 190 degrees C, the scattering maxima gradually broadened and became nonequidistant again but having the second peak shifted toward a scattering angle higher than twice the first peak position. The changes in SAXS patterns above 190 degrees C could be attributed to the collapse of organic layers due to desorption and/or degradation of surfactant component, which was supported by the TGA data.

Development of a nanostructured DNA delivery scaffold via electrospinning of PLGA and PLA-PEG block copolymers

The present work utilizes electrospinning to fabricate synthetic polymer/DNA composite scaffolds for therapeutic application in gene delivery for tissue engineering. The scaffolds are non-woven, nano-fibered, membranous structures composed predominantly of poly(lactide-co-glycolide) (PLGA) random copolymer and a poly(D,L-lactide)-poly(ethylene glycol) (PLA-PEG) block copolymer. Release of plasmid DNA from the scaffolds was sustained over a 20-day study period, with maximum release occurring at approximately 2 h. Cumulative release profiles indicated amounts released were approximately 68-80% of the initially loaded DNA. Variations in the PLGA to PLA-PEG block copolymer ratio vastly affected the overall structural morphology, as well as both the rate and efficiency of DNA release. Results indicated that DNA released directly from these electrospun scaffolds was indeed intact, capable of cellular transfection, and successfully encoded the protein beta-galactosidase. When tested under tensile loads, the electrospun polymer/DNA composite scaffolds exhibited tensile moduli of approximately 35 MPa, with approximately 45% strain initially. These values approximate those of skin and cartilage. Taken together, this work represents the first successful demonstration of plasmid DNA incorporation into a polymer scaffold using electrospinning.

Genetic follow-up of male offspring born by ICSI, using a multiplex fluorescent PCR-based test for Yq deletions

De-novo deletions involving AZFa, b, c and d are one of the most common chromosomal aberrations in man resulting in defective spermatogenesis and male infertility. Currently, Yq deletion screening involves either single or multiplex PCR using Y-specific sequence tagged site markers and the subsequent analysis of the amplification products on ethidium bromide-stained agarose gels. To improve the practicality of routine and high throughput Yq testing, we have developed a more sensitive multiplex fluorescent (FL)-PCR screening system using genomic DNA extracted from cheek buccal cells as a readily available PCR template. For genetic follow-up studies of ICSI-conceived children, we also developed a DNA fingerprinting system based on the co-amplification of four highly polymorphic markers to validate family samples and detect any potential extraneous DNA contamination that could cause a misdiagnosis. Multiplex FL-PCR analysis of buccal cell DNA from two infertile men who conceived three sons by ICSI demonstrated that their Yq deletions were vertically transmitted. Fine mapping with additional Yq markers revealed identical deletion endpoints involving the loss of AZFdc sequences. This firstly indicates that the extent of the Yq deletion was unchanged on ICSI transmission and secondly supports the view that AZFdc deletions may arise by a common de-novo event. Analysis of paternal, maternal and sibling DNA fingerprints showed the co-inheritance of parental alleles by each male child and confirmed the expected relationship between each family member. The application of these new FL-PCR based screening tests in genetic follow-up studies will assist in confirming transmission of specific genetic defects to male offspring conceived by ICSI and provide a basis for genetic counselling and potential treatment options as these boys approach sexual maturity.